summaryrefslogtreecommitdiff
path: root/block/blk-mq-sysfs.c
AgeCommit message (Collapse)AuthorFilesLines
2022-03-09blk-mq: prepare for implementing hctx table via xarrayMing Lei1-6/+10
It is inevitable to cause use-after-free on q->queue_hw_ctx between queue_for_each_hw_ctx() and blk_mq_update_nr_hw_queues(). And converting to xarray can fix the uaf, meantime code gets cleaner. Prepare for converting q->queue_hctx_ctx into xarray, one thing is that xa_for_each() can only accept 'unsigned long' as index, so changes type of hctx index of queue_for_each_hw_ctx() into 'unsigned long'. Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220308073219.91173-6-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-04blk-mq: move srcu from blk_mq_hw_ctx to request_queueMing Lei1-2/+0
In case of BLK_MQ_F_BLOCKING, per-hctx srcu is used to protect dispatch critical area. However, this srcu instance stays at the end of hctx, and it often takes standalone cacheline, often cold. Inside srcu_read_lock() and srcu_read_unlock(), WRITE is always done on the indirect percpu variable which is allocated from heap instead of being embedded, srcu->srcu_idx is read only in srcu_read_lock(). It doesn't matter if srcu structure stays in hctx or request queue. So switch to per-request-queue srcu for protecting dispatch, and this way simplifies quiesce a lot, not mention quiesce is always done on the request queue wide. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20211203131534.3668411-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-02block: remove blk-mq-sysfs dead codeDamien Le Moal1-55/+0
In block/blk-mq-sysfs.c, struct blk_mq_ctx_sysfs_entry is not used to define any attribute since the "mq" sysfs directory contains only sub-directories (no attribute files). As a result, blk_mq_sysfs_show(), blk_mq_sysfs_store(), and struct sysfs_ops blk_mq_sysfs_ops are all unused and unnecessary. Remove all this unused code. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Link: https://lore.kernel.org/r/20210713081837.524422-1-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09blk-mq: move cancel of hctx->run_work to the front of blk_exit_queueYang Yang1-2/+0
blk_exit_queue will free elevator_data, while blk_mq_run_work_fn will access it. Move cancel of hctx->run_work to the front of blk_exit_queue to avoid use-after-free. Fixes: 1b97871b501f ("blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release") Signed-off-by: Yang Yang <yang.yang@vivo.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04blk-mq: make sure that line break can be printedMing Lei1-1/+1
8962842ca5ab ("blk-mq: avoid sysfs buffer overflow with too many CPU cores") avoids sysfs buffer overflow, and reserves one character for line break. However, the last snprintf() doesn't get correct 'size' parameter passed in, so fixed it. Fixes: 8962842ca5ab ("blk-mq: avoid sysfs buffer overflow with too many CPU cores") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-02blk-mq: avoid sysfs buffer overflow with too many CPU coresMing Lei1-5/+10
It is reported that sysfs buffer overflow can be triggered if the system has too many CPU cores(>841 on 4K PAGE_SIZE) when showing CPUs of hctx via /sys/block/$DEV/mq/$N/cpu_list. Use snprintf to avoid the potential buffer overflow. This version doesn't change the attribute format, and simply stops showing CPU numbers if the buffer is going to overflow. Cc: stable@vger.kernel.org Fixes: 676141e48af7("blk-mq: don't dump CPU -> hw queue map on driver load") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-07block: Remove "dying" checks from sysfs callbacksBart Van Assche1-12/+4
Block drivers must call del_gendisk() before blk_cleanup_queue(). del_gendisk() calls kobject_del() and kobject_del() waits until any ongoing sysfs callback functions have finished. In other words, the sysfs callback functions won't be called for a queue in the dying state. Hence remove the "dying" checks from the sysfs callback functions. Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27block: split .sysfs_lock into two locksMing Lei1-6/+6
The kernfs built-in lock of 'kn->count' is held in sysfs .show/.store path. Meantime, inside block's .show/.store callback, q->sysfs_lock is required. However, when mq & iosched kobjects are removed via blk_mq_unregister_dev() & elv_unregister_queue(), q->sysfs_lock is held too. This way causes AB-BA lock because the kernfs built-in lock of 'kn-count' is required inside kobject_del() too, see the lockdep warning[1]. On the other hand, it isn't necessary to acquire q->sysfs_lock for both blk_mq_unregister_dev() & elv_unregister_queue() because clearing REGISTERED flag prevents storing to 'queue/scheduler' from being happened. Also sysfs write(store) is exclusive, so no necessary to hold the lock for elv_unregister_queue() when it is called in switching elevator path. So split .sysfs_lock into two: one is still named as .sysfs_lock for covering sync .store, the other one is named as .sysfs_dir_lock for covering kobjects and related status change. sysfs itself can handle the race between add/remove kobjects and showing/storing attributes under kobjects. For switching scheduler via storing to 'queue/scheduler', we use the queue flag of QUEUE_FLAG_REGISTERED with .sysfs_lock for avoiding the race, then we can avoid to hold .sysfs_lock during removing/adding kobjects. [1] lockdep warning ====================================================== WARNING: possible circular locking dependency detected 5.3.0-rc3-00044-g73277fc75ea0 #1380 Not tainted ------------------------------------------------------ rmmod/777 is trying to acquire lock: 00000000ac50e981 (kn->count#202){++++}, at: kernfs_remove_by_name_ns+0x59/0x72 but task is already holding lock: 00000000fb16ae21 (&q->sysfs_lock){+.+.}, at: blk_unregister_queue+0x78/0x10b which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&q->sysfs_lock){+.+.}: __lock_acquire+0x95f/0xa2f lock_acquire+0x1b4/0x1e8 __mutex_lock+0x14a/0xa9b blk_mq_hw_sysfs_show+0x63/0xb6 sysfs_kf_seq_show+0x11f/0x196 seq_read+0x2cd/0x5f2 vfs_read+0xc7/0x18c ksys_read+0xc4/0x13e do_syscall_64+0xa7/0x295 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (kn->count#202){++++}: check_prev_add+0x5d2/0xc45 validate_chain+0xed3/0xf94 __lock_acquire+0x95f/0xa2f lock_acquire+0x1b4/0x1e8 __kernfs_remove+0x237/0x40b kernfs_remove_by_name_ns+0x59/0x72 remove_files+0x61/0x96 sysfs_remove_group+0x81/0xa4 sysfs_remove_groups+0x3b/0x44 kobject_del+0x44/0x94 blk_mq_unregister_dev+0x83/0xdd blk_unregister_queue+0xa0/0x10b del_gendisk+0x259/0x3fa null_del_dev+0x8b/0x1c3 [null_blk] null_exit+0x5c/0x95 [null_blk] __se_sys_delete_module+0x204/0x337 do_syscall_64+0xa7/0x295 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->sysfs_lock); lock(kn->count#202); lock(&q->sysfs_lock); lock(kn->count#202); *** DEADLOCK *** 2 locks held by rmmod/777: #0: 00000000e69bd9de (&lock){+.+.}, at: null_exit+0x2e/0x95 [null_blk] #1: 00000000fb16ae21 (&q->sysfs_lock){+.+.}, at: blk_unregister_queue+0x78/0x10b stack backtrace: CPU: 0 PID: 777 Comm: rmmod Not tainted 5.3.0-rc3-00044-g73277fc75ea0 #1380 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS ?-20180724_192412-buildhw-07.phx4 Call Trace: dump_stack+0x9a/0xe6 check_noncircular+0x207/0x251 ? print_circular_bug+0x32a/0x32a ? find_usage_backwards+0x84/0xb0 check_prev_add+0x5d2/0xc45 validate_chain+0xed3/0xf94 ? check_prev_add+0xc45/0xc45 ? mark_lock+0x11b/0x804 ? check_usage_forwards+0x1ca/0x1ca __lock_acquire+0x95f/0xa2f lock_acquire+0x1b4/0x1e8 ? kernfs_remove_by_name_ns+0x59/0x72 __kernfs_remove+0x237/0x40b ? kernfs_remove_by_name_ns+0x59/0x72 ? kernfs_next_descendant_post+0x7d/0x7d ? strlen+0x10/0x23 ? strcmp+0x22/0x44 kernfs_remove_by_name_ns+0x59/0x72 remove_files+0x61/0x96 sysfs_remove_group+0x81/0xa4 sysfs_remove_groups+0x3b/0x44 kobject_del+0x44/0x94 blk_mq_unregister_dev+0x83/0xdd blk_unregister_queue+0xa0/0x10b del_gendisk+0x259/0x3fa ? disk_events_poll_msecs_store+0x12b/0x12b ? check_flags+0x1ea/0x204 ? mark_held_locks+0x1f/0x7a null_del_dev+0x8b/0x1c3 [null_blk] null_exit+0x5c/0x95 [null_blk] __se_sys_delete_module+0x204/0x337 ? free_module+0x39f/0x39f ? blkcg_maybe_throttle_current+0x8a/0x718 ? rwlock_bug+0x62/0x62 ? __blkcg_punt_bio_submit+0xd0/0xd0 ? trace_hardirqs_on_thunk+0x1a/0x20 ? mark_held_locks+0x1f/0x7a ? do_syscall_64+0x4c/0x295 do_syscall_64+0xa7/0x295 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fb696cdbe6b Code: 73 01 c3 48 8b 0d 1d 20 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 008 RSP: 002b:00007ffec9588788 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000559e589137c0 RCX: 00007fb696cdbe6b RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559e58913828 RBP: 0000000000000000 R08: 00007ffec9587701 R09: 0000000000000000 R10: 00007fb696d4eae0 R11: 0000000000000206 R12: 00007ffec95889b0 R13: 00007ffec95896b3 R14: 0000559e58913260 R15: 0000559e589137c0 Cc: Christoph Hellwig <hch@infradead.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27block: Remove blk_mq_register_dev()Bart Van Assche1-11/+0
This function has no callers. Hence remove it. Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-08Merge tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+9
Pull block updates from Jens Axboe: "Nothing major in this series, just fixes and improvements all over the map. This contains: - Series of fixes for sed-opal (David, Jonas) - Fixes and performance tweaks for BFQ (via Paolo) - Set of fixes for bcache (via Coly) - Set of fixes for md (via Song) - Enabling multi-page for passthrough requests (Ming) - Queue release fix series (Ming) - Device notification improvements (Martin) - Propagate underlying device rotational status in loop (Holger) - Removal of mtip32xx trim support, which has been disabled for years (Christoph) - Improvement and cleanup of nvme command handling (Christoph) - Add block SPDX tags (Christoph) - Cleanup/hardening of bio/bvec iteration (Christoph) - A few NVMe pull requests (Christoph) - Removal of CONFIG_LBDAF (Christoph) - Various little fixes here and there" * tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits) block: fix mismerge in bvec_advance block: don't drain in-progress dispatch in blk_cleanup_queue() blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release blk-mq: always free hctx after request queue is freed blk-mq: split blk_mq_alloc_and_init_hctx into two parts blk-mq: free hw queue's resource in hctx's release handler blk-mq: move cancel of requeue_work into blk_mq_release blk-mq: grab .q_usage_counter when queuing request from plug code path block: fix function name in comment nvmet: protect discovery change log event list iteration nvme: mark nvme_core_init and nvme_core_exit static nvme: move command size checks to the core nvme-fabrics: check more command sizes nvme-pci: check more command sizes nvme-pci: remove an unneeded variable initialization nvme-pci: unquiesce admin queue on shutdown nvme-pci: shutdown on timeout during deletion nvme-pci: fix psdt field for single segment sgls nvme-multipath: don't print ANA group state by default nvme-multipath: split bios with the ns_head bio_set before submitting ...
2019-05-04blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_releaseMing Lei1-0/+2
hctx is always released after requeue is freed. With holding queue's kobject refcount, it is safe for driver to run queue, so one run queue might be scheduled after blk_sync_queue() is done. So moving the cancel of hctx->run_work into blk_mq_hw_sysfs_release() for avoiding run released queue. Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04blk-mq: free hw queue's resource in hctx's release handlerMing Lei1-0/+6
Once blk_cleanup_queue() returns, tags shouldn't be used any more, because blk_mq_free_tag_set() may be called. Commit 45a9c9d909b2 ("blk-mq: Fix a use-after-free") fixes this issue exactly. However, that commit introduces another issue. Before 45a9c9d909b2, we are allowed to run queue during cleaning up queue if the queue's kobj refcount is held. After that commit, queue can't be run during queue cleaning up, otherwise oops can be triggered easily because some fields of hctx are freed by blk_mq_free_queue() in blk_cleanup_queue(). We have invented ways for addressing this kind of issue before, such as: 8dc765d438f1 ("SCSI: fix queue cleanup race before queue initialization is done") c2856ae2f315 ("blk-mq: quiesce queue before freeing queue") But still can't cover all cases, recently James reports another such kind of issue: https://marc.info/?l=linux-scsi&m=155389088124782&w=2 This issue can be quite hard to address by previous way, given scsi_run_queue() may run requeues for other LUNs. Fixes the above issue by freeing hctx's resources in its release handler, and this way is safe becasue tags isn't needed for freeing such hctx resource. This approach follows typical design pattern wrt. kobject's release handler. Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reported-by: James Smart <james.smart@broadcom.com> Fixes: 45a9c9d909b2 ("blk-mq: Fix a use-after-free") Cc: stable@vger.kernel.org Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01block: add SPDX tags to block layer files missing licensing informationChristoph Hellwig1-0/+1
Various block layer files do not have any licensing information at all. Add SPDX tags for the default kernel GPLv2 license to those. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-25block: Replace all ktype default_attrs with groupsKimberly Brown1-6/+2
The kobj_type default_attrs field is being replaced by the default_groups field. Replace all of the ktype default_attrs fields in the block subsystem with default_groups and use the ATTRIBUTE_GROUPS macro to create the default groups. Remove default_ctx_attrs[] because it doesn't contain any attributes. This patch was tested by verifying that the sysfs files for the attributes in the default groups were created. Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-17blk-mq: export hctx->type in debugfs instead of sysfsMing Lei1-17/+0
Now we only export hctx->type via sysfs, and there isn't such info in hctx entry under debugfs. We often use debugfs only to diagnose queue mapping issue, so add the support in debugfs. Queue mapping becomes a bit more complicated after multiple queue mapping is supported, we may write blktest to verify if queue mapping is valid based on blk-mq-debugfs. Given not necessary to export hctx->type twice, so remove the export from sysfs. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04block: move queues types to the block layerChristoph Hellwig1-1/+8
Having another indirect all in the fast path doesn't really help in our post-spectre world. Also having too many queue type is just going to create confusion, so I'd rather manage them centrally. Note that the queue type naming and ordering changes a bit - the first index now is the default queue for everything not explicitly marked, the optional ones are read and poll queues. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-21blk-mq: not embed .mq_kobj and ctx->kobj into queue instanceMing Lei1-10/+24
Even though .mq_kobj, ctx->kobj and q->kobj share same lifetime from block layer's view, actually they don't because userspace may grab one kobject anytime via sysfs. This patch fixes the issue by the following approach: 1) introduce 'struct blk_mq_ctxs' for holding .mq_kobj and managing all ctxs 2) free all allocated ctxs and the 'blk_mq_ctxs' instance in release handler of .mq_kobj 3) grab one ref of .mq_kobj before initializing each ctx->kobj, so that .mq_kobj is always released after all ctxs are freed. This patch fixes kernel panic issue during booting when DEBUG_KOBJECT_RELEASE is enabled. Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: "jianchao.wang" <jianchao.w.wang@oracle.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15block: remove a few unused exportsChristoph Hellwig1-1/+0
Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07blk-mq: add 'type' attribute to the sysfs hctx directoryJens Axboe1-0/+10
It can be useful for a user to verify what type a given hardware queue is, expose this information in sysfs. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-24block drivers/block: Use octal not symbolic permissionsJoe Perches1-3/+3
Convert the S_<FOO> symbolic permissions to their octal equivalents as using octal and not symbolic permissions is preferred by many as more readable. see: https://lkml.org/lkml/2016/8/2/1945 Done with automated conversion via: $ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...> Miscellanea: o Wrapped modified multi-line calls to a single line where appropriate o Realign modified multi-line calls to open parenthesis Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-15block: properly protect the 'queue' kobj in blk_unregister_queueMike Snitzer1-8/+1
The original commit e9a823fb34a8b (block: fix warning when I/O elevator is changed as request_queue is being removed) is pretty conflated. "conflated" because the resource being protected by q->sysfs_lock isn't the queue_flags (it is the 'queue' kobj). q->sysfs_lock serializes __elevator_change() (via elv_iosched_store) from racing with blk_unregister_queue(): 1) By holding q->sysfs_lock first, __elevator_change() can complete before a racing blk_unregister_queue(). 2) Conversely, __elevator_change() is testing for QUEUE_FLAG_REGISTERED in case elv_iosched_store() loses the race with blk_unregister_queue(), it needs a way to know the 'queue' kobj isn't there. Expand the scope of blk_unregister_queue()'s q->sysfs_lock use so it is held until after the 'queue' kobj is removed. To do so blk_mq_unregister_dev() must not also take q->sysfs_lock. So rename __blk_mq_unregister_dev() to blk_mq_unregister_dev(). Also, blk_unregister_queue() should use q->queue_lock to protect against any concurrent writes to q->queue_flags -- even though chances are the queue is being cleaned up so no concurrent writes are likely. Fixes: e9a823fb34a8b ("block: fix warning when I/O elevator is changed as request_queue is being removed") Signed-off-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-05-04blk-mq: untangle debugfs and sysfsOmar Sandoval1-11/+0
Originally, I tied debugfs registration/unregistration together with sysfs. There's no reason to do this, and it's getting in the way of letting schedulers define their own debugfs attributes. Instead, tie the debugfs registration to the lifetime of the structures themselves. The saner lifetimes mean we can also get rid of the extra mq directory and move everything one level up. I.e., nvme0n1/mq/hctx0/tags is now just nvme0n1/hctx0/tags. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04blk-mq: move debugfs declarations to a separate header fileOmar Sandoval1-0/+1
Preparation for adding more declarations. Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-27blk-mq: Only unregister hctxs for which registration succeededBart Van Assche1-5/+13
Hctx unregistration involves calling kobject_del(). kobject_del() must not be called if kobject_add() has not been called. Hence in the error path only unregister hctxs for which registration succeeded. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-27blk-mq-debugfs: Rename functions for registering and unregistering the mq ↵Bart Van Assche1-3/+3
directory Since the blk_mq_debugfs_*register_hctxs() functions register and unregister all attributes under the "mq" directory, rename these into blk_mq_debugfs_*register_mq(). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-27blk-mq: Let blk_mq_debugfs_register() look up the queue nameBart Van Assche1-1/+1
A later patch will move the call of blk_mq_debugfs_register() to a function to which the queue name is not passed as an argument. To avoid having to add a 'name' argument to multiple callers, let blk_mq_debugfs_register() look up the queue name. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-27blk-mq: Register <dev>/queue/mq after having registered <dev>/queueBart Van Assche1-7/+28
A later patch in this series will modify blk_mq_debugfs_register() such that it uses q->kobj.parent to determine the name of a request queue. Hence make sure that that pointer is initialized before blk_mq_debugfs_register() is called. To avoid lock inversion, protect sysfs / debugfs registration with the queue sysfs_lock instead of the global mutex all_q_mutex. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08blk-mq: free hctx->cpumask in release handler of hctx's kobjectMing Lei1-0/+1
It is obviously that hctx->cpumask is per hctx, and both share same lifetime, so this patch moves freeing of hctx->cpumask into release handler of hctx's kobject. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08blk-mq: make lifetime consistent between hctx and its kobjectMing Lei1-5/+10
This patch removes kobject_put() over hctx in __blk_mq_unregister_dev(), and trys to keep lifetime consistent between hctx and hctx's kobject. Now blk_mq_sysfs_register() and blk_mq_sysfs_unregister() become totally symmetrical, and kobject's refcounter drops to zero just when the hctx is freed. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08blk-mq: make lifetime consitent between q/ctx and its kobjectMing Lei1-7/+13
Currently from kobject view, both q->mq_kobj and ctx->kobj can be released during one cycle of blk_mq_register_dev() and blk_mq_unregister_dev(). Actually, sw queue's lifetime is same with its request queue's, which is covered by request_queue->kobj. So we don't need to call kobject_put() for the two kinds of kobject in __blk_mq_unregister_dev(), instead we do that in release handler of request queue. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08blk-mq: initialize mq kobjects in blk_mq_init_allocated_queue()Ming Lei1-3/+1
Both q->mq_kobj and sw queues' kobjects should have been initialized once, instead of doing that each add_disk context. Also this patch removes clearing of ctx in blk_mq_init_cpu_queues() because percpu allocator fills zero to allocated variable. This patch fixes one issue[1] reported from Omar. [1] kernel wearning when doing unbind/bind on one scsi-mq device [ 19.347924] kobject (ffff8800791ea0b8): tried to init an initialized object, something is seriously wrong. [ 19.349781] CPU: 1 PID: 84 Comm: kworker/u8:1 Not tainted 4.10.0-rc7-00210-g53f39eeaa263 #34 [ 19.350686] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-20161122_114906-anatol 04/01/2014 [ 19.350920] Workqueue: events_unbound async_run_entry_fn [ 19.350920] Call Trace: [ 19.350920] dump_stack+0x63/0x83 [ 19.350920] kobject_init+0x77/0x90 [ 19.350920] blk_mq_register_dev+0x40/0x130 [ 19.350920] blk_register_queue+0xb6/0x190 [ 19.350920] device_add_disk+0x1ec/0x4b0 [ 19.350920] sd_probe_async+0x10d/0x1c0 [sd_mod] [ 19.350920] async_run_entry_fn+0x48/0x150 [ 19.350920] process_one_work+0x1d0/0x480 [ 19.350920] worker_thread+0x48/0x4e0 [ 19.350920] kthread+0x101/0x140 [ 19.350920] ? process_one_work+0x480/0x480 [ 19.350920] ? kthread_create_on_node+0x60/0x60 [ 19.350920] ret_from_fork+0x2c/0x40 Cc: Omar Sandoval <osandov@osandov.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-02blk-mq: move debugfs_remove() of disk dir to blk_release_queue()Omar Sandoval1-1/+1
This needs to happen after we tear down blktrace. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27blk-mq: move hctx and ctx counters from sysfs to debugfsOmar Sandoval1-64/+0
These counters aren't as out-of-place in sysfs as the other stuff, but debugfs is a slightly better home for them. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27blk-mq: move hctx io_poll, stats, and dispatched from sysfs to debugfsOmar Sandoval1-92/+0
These statistics _might_ be useful to userspace, but it's better not to commit to an ABI for these yet. Also, the dispatched file in sysfs couldn't be cleared, so make it clearable like the others in debugfs. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27blk-mq: move tags and sched_tags info from sysfs to debugfsOmar Sandoval1-17/+16
These are very tied to the blk-mq tag implementation, so exposing them to sysfs isn't a great idea. Move the debugging information to debugfs and add basic entries for the number of tags and the number of reserved tags to sysfs. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27blk-mq: move hctx->dispatch and ctx->rq_list from sysfs to debugfsOmar Sandoval1-57/+0
These lists are only useful for debugging; they definitely don't belong in sysfs. Putting them in debugfs also removes the limitation of a single page of output. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27blk-mq: create debugfs directory treeOmar Sandoval1-0/+8
In preparation for putting blk-mq debugging information in debugfs, create a directory tree mirroring the one in sysfs: # tree -d /sys/kernel/debug/block /sys/kernel/debug/block |-- nvme0n1 | `-- mq | |-- 0 | | `-- cpu0 | |-- 1 | | `-- cpu1 | |-- 2 | | `-- cpu2 | `-- 3 | `-- cpu3 `-- vda `-- mq `-- 0 |-- cpu0 |-- cpu1 |-- cpu2 `-- cpu3 Also add the scaffolding for the actual files that will go in here, either under the hardware queue or software queue directories. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-17blk-mq-sched: add framework for MQ capable IO schedulersJens Axboe1-0/+13
This adds a set of hooks that intercepts the blk-mq path of allocating/inserting/issuing/completing requests, allowing us to develop a scheduler within that framework. We reuse the existing elevator scheduler API on the registration side, but augment that with the scheduler flagging support for the blk-mq interfce, and with a separate set of ops hooks for MQ devices. We split driver and scheduler tags, so we can run the scheduling independently of device queue depth. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Omar Sandoval <osandov@fb.com>
2016-11-10block: add scalable completion tracking of requestsJens Axboe1-0/+47
For legacy block, we simply track them in the request queue. For blk-mq, we track them on a per-sw queue basis, which we can then sum up through the hardware queues and finally to a per device state. The stats are tracked in, roughly, 0.1s interval windows. Add sysfs files to display the stats. The feature is off by default, to avoid any extra overhead. In-kernel users of it can turn it on by setting QUEUE_FLAG_STATS in the queue flags. We currently don't turn it on if someone just reads any of the stats files, that is something we could add as well. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-21blk-mq: register device instead of diskMatias Bjørling1-10/+7
Enable devices without a gendisk instance to register itself with blk-mq and expose the associated multi-queue sysfs entries. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-16blk-mq: account higher order dispatchJens Axboe1-3/+5
We currently account a '0' dispatch, and anything above that still falls below the range set by BLK_MQ_MAX_DISPATCH_ORDER. If we dispatch more, we don't account it. Change the last bucket to be inclusive of anything above the range we track, and have the sysfs file reflect that by including a '+' in the output: $ cat /sys/block/nvme0n1/mq/0/dispatched 0 1006 1 20229 2 1 4 0 8 0 16 0 32+ 0 Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Omar Sandoval <osandov@fb.com>
2016-09-14block: enable zeroing of io_poll statisticsStephen Bates1-1/+10
Allow the io_poll statistics to be zeroed to make for easier logging of polling event. Signed-off-by: Stephen Bates <sbates@raithlin.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-14block: add poll_considered statisticStephen Bates1-1/+3
In order to help determine the effectiveness of polling in a running system it is usful to determine the ratio of how often the poll function is called vs how often the completion is checked. For this reason we add a poll_considered variable and add it to the sysfs entry for io_poll. Signed-off-by: Stephen Bates <sbates@raithlin.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04blk-mq: fix deadlock in blk_mq_register_disk() error pathJens Axboe1-4/+8
If we fail registering any of the hardware queues, we call into blk_mq_unregister_disk() with the hotplug mutex already held. Since blk_mq_unregister_disk() attempts to acquire the same mutex, we end up in a less than happy place. Reported-by: Jinpu Wang <jinpu.wang@profitbricks.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-20blk-mq: Use proper cpumask iteratorThomas Gleixner1-2/+4
queue_for_each_ctx() iterates over per_cpu variables under the assumption that the possible cpu mask cannot have holes. That's wrong as all cpumasks can have holes. In case there are holes the iteration ends up accessing uninitialized memory and crashing as a result. Replace the macro by a proper for_each_possible_cpu() loop and drop the unused macro blk_ctx_sum() which references queue_for_each_ctx(). Reported-by: Xiong Zhou <jencce.kernel@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-09blk-mq: dynamic h/w context countKeith Busch1-4/+5
The hardware's provided queue count may change at runtime with resource provisioning. This patch allows a block driver to alter the number of h/w queues available when its resource count changes. The main part is a new blk-mq API to request a new number of h/w queues for a given live tag set. The new API freezes all queues using that set, then adjusts the allocated count prior to remapping these to CPUs. The bulk of the rest just shifts where h/w contexts and all their artifacts are allocated and freed. The number of max h/w contexts is capped to the number of possible cpus since there is no use for more than that. As such, all pre-allocated memory for pointers need to account for the max possible rather than the initial number of queues. A side effect of this is that the blk-mq will proceed successfully as long as it can allocate at least one h/w context. Previously it would fail request queue initialization if less than the requested number was allocated. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-07block: add block polling supportJens Axboe1-0/+10
Add basic support for polling for specific IO to complete. This uses the cookie that blk-mq passes back, which enables the block layer to pass this cookie to the driver to spin for a specific request. This will be combined with request latency tracking, so we can make qualified decisions about when to poll and when not to. For now, for benchmark purposes, we add a sysfs file that controls whether polling is enabled or not. Signed-off-by: Jens Axboe <axboe@fb.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com>
2015-10-21block: generic request_queue reference countingDan Williams1-6/+0
Allow pmem, and other synchronous/bio-based block drivers, to fallback on a per-cpu reference count managed by the core for tracking queue live/dead state. The existing per-cpu reference count for the blk_mq case is promoted to be used in all block i/o scenarios. This involves initializing it by default, waiting for it to drop to zero at exit, and holding a live reference over the invocation of q->make_request_fn() in generic_make_request(). The blk_mq code continues to take its own reference per blk_mq request and retains the ability to freeze the queue, but the check that the queue is frozen is moved to generic_make_request(). This fixes crash signatures like the following: BUG: unable to handle kernel paging request at ffff880140000000 [..] Call Trace: [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70 [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem] [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem] [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0 [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110 [<ffffffff8141f966>] submit_bio+0x76/0x170 [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160 [<ffffffff81286e62>] submit_bh+0x12/0x20 [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170 [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90 [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270 [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30 [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250 [<ffffffff81303494>] ext4_put_super+0x64/0x360 [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0 Cc: Jens Axboe <axboe@kernel.dk> Cc: Keith Busch <keith.busch@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-09-29blk-mq: fix deadlock when reading cpu_listAkinobu Mita1-4/+0
CPU hotplug handling for blk-mq (blk_mq_queue_reinit) acquires all_q_mutex in blk_mq_queue_reinit_notify() and then removes sysfs entries by blk_mq_sysfs_unregister(). Removing sysfs entry needs to be blocked until the active reference of the kernfs_node to be zero. On the other hand, reading blk_mq_hw_sysfs_cpu sysfs entry (e.g. /sys/block/nullb0/mq/0/cpu_list) acquires all_q_mutex in blk_mq_hw_sysfs_cpus_show(). If these happen at the same time, a deadlock can happen. Because one can wait for the active reference to be zero with holding all_q_mutex, and the other tries to acquire all_q_mutex with holding the active reference. The reason that all_q_mutex is acquired in blk_mq_hw_sysfs_cpus_show() is to avoid reading an imcomplete hctx->cpumask. Since reading sysfs entry for blk-mq needs to acquire q->sysfs_lock, we can avoid deadlock and reading an imcomplete hctx->cpumask by protecting q->sysfs_lock while hctx->cpumask is being updated. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-09-29blk-mq: fix sysfs registration/unregistration raceAkinobu Mita1-8/+22
There is a race between cpu hotplug handling and adding/deleting gendisk for blk-mq, where both are trying to register and unregister the same sysfs entries. null_add_dev --> blk_mq_init_queue --> blk_mq_init_allocated_queue --> add to 'all_q_list' (*) --> add_disk --> blk_register_queue --> blk_mq_register_disk (++) null_del_dev --> del_gendisk --> blk_unregister_queue --> blk_mq_unregister_disk (--) --> blk_cleanup_queue --> blk_mq_free_queue --> del from 'all_q_list' (*) blk_mq_queue_reinit --> blk_mq_sysfs_unregister (-) --> blk_mq_sysfs_register (+) While the request queue is added to 'all_q_list' (*), blk_mq_queue_reinit() can be called for the queue anytime by CPU hotplug callback. But blk_mq_sysfs_unregister (-) and blk_mq_sysfs_register (+) in blk_mq_queue_reinit must not be called before blk_mq_register_disk (++) and after blk_mq_unregister_disk (--) is finished. Because '/sys/block/*/mq/' is not exists. There has already been BLK_MQ_F_SYSFS_UP flag in hctx->flags which can be used to track these sysfs stuff, but it is only fixing this issue partially. In order to fix it completely, we just need per-queue flag instead of per-hctx flag with appropriate locking. So this introduces q->mq_sysfs_init_done which is properly protected with all_q_mutex. Also, we need to ensure that blk_mq_map_swqueue() is called with all_q_mutex is held. Since hctx->nr_ctx is reset temporarily and updated in blk_mq_map_swqueue(), so we should avoid blk_mq_register_hctx() seeing the temporary hctx->nr_ctx value in CPU hotplug handling or adding/deleting gendisk . Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>