summaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2021-07-09Merge tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-blockLinus Torvalds9-27/+63
Pull more block updates from Jens Axboe: "A combination of changes that ended up depending on both the driver and core branch (and/or the IDE removal), and a few late arriving fixes. In detail: - Fix io ticks wrap-around issue (Chunguang) - nvme-tcp sock locking fix (Maurizio) - s390-dasd fixes (Kees, Christoph) - blk_execute_rq polling support (Keith) - blk-cgroup RCU iteration fix (Yu) - nbd backend ID addition (Prasanna) - Partition deletion fix (Yufen) - Use blk_mq_alloc_disk for mmc, mtip32xx, ubd (Christoph) - Removal of now dead block request types due to IDE removal (Christoph) - Loop probing and control device cleanups (Christoph) - Device uevent fix (Christoph) - Misc cleanups/fixes (Tetsuo, Christoph)" * tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block: (34 commits) blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgs block: fix the problem of io_ticks becoming smaller nvme-tcp: can't set sk_user_data without write_lock loop: remove unused variable in loop_set_status() block: remove the bdgrab in blk_drop_partitions block: grab a device refcount in disk_uevent s390/dasd: Avoid field over-reading memcpy() dasd: unexport dasd_set_target_state block: check disk exist before trying to add partition ubd: remove dead code in ubd_setup_common nvme: use return value from blk_execute_rq() block: return errors from blk_execute_rq() nvme: use blk_execute_rq() for passthrough commands block: support polling through blk_execute_rq block: remove REQ_OP_SCSI_{IN,OUT} block: mark blk_mq_init_queue_data static loop: rewrite loop_exit using idr_for_each_entry loop: split loop_lookup loop: don't allow deleting an unspecified loop device loop: move loop_ctl_mutex locking into loop_add ...
2021-07-07blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgsYu Kuai1-0/+15
We run a test that create millions of cgroups and blkgs, and then trigger blkg_destroy_all(). blkg_destroy_all() will hold spin lock for a long time in such situation. Thus release the lock when a batch of blkgs are destroyed. blkcg_activate_policy() and blkcg_deactivate_policy() might have the same problem, however, as they are basically only called from module init/exit paths, let's leave them alone for now. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20210707015649.1929797-1-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-07block: fix the problem of io_ticks becoming smallerChunguang Xu1-1/+1
On the IO submission path, blk_account_io_start() may interrupt the system interruption. When the interruption returns, the value of part->stamp may have been updated by other cores, so the time value collected before the interruption may be less than part-> stamp. So when this happens, we should do nothing to make io_ticks more accurate? For kernels less than 5.0, this may cause io_ticks to become smaller, which in turn may cause abnormal ioutil values. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/1625521646-1069-1-git-send-email-brookxu.cn@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-04scsi: blkcg: Fix application ID config optionsMartin K. Petersen1-1/+1
Commit d2bcbeab4200 ("scsi: blkcg: Add app identifier support for blkcg") introduced an FC_APPID config option under SCSI. However, the added config option is not used anywhere. Simply remove it. The block layer BLK_CGROUP_FC_APPID config option is what actually controls whether the application ID code should be built or not. Make this option dependent on NVMe over FC since that is currently the only transport which supports the capability. Fixes: d2bcbeab4200 ("scsi: blkcg: Add app identifier support for blkcg") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-03Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds4-7/+21
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, ibmvfc, megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with elx and mpi3mr being new drivers. The major core change is a rework to drop the status byte handling macros and the old bit shifted definitions and the rest of the updates are minor fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits) scsi: aha1740: Avoid over-read of sense buffer scsi: arcmsr: Avoid over-read of sense buffer scsi: ips: Avoid over-read of sense buffer scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe() scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame() scsi: elx: libefc: Fix less than zero comparison of a unsigned int scsi: elx: efct: Fix pointer error checking in debugfs init scsi: elx: efct: Fix is_originator return code type scsi: elx: efct: Fix link error for _bad_cmpxchg scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel() scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session() scsi: elx: efct: Fix error handling in efct_hw_init() scsi: elx: efct: Remove redundant initialization of variable lun scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected" scsi: lpfc: Fix build error in lpfc_scsi.c scsi: target: iscsi: Remove redundant continue statement scsi: qla4xxx: Remove redundant continue statement scsi: ppa: Switch to use module_parport_driver() scsi: imm: Switch to use module_parport_driver() scsi: mpt3sas: Fix error return value in _scsih_expander_add() ...
2021-07-02Merge tag 'asm-generic-unaligned-5.14' of ↵Linus Torvalds3-17/+12
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm/unaligned.h unification from Arnd Bergmann: "Unify asm/unaligned.h around struct helper The get_unaligned()/put_unaligned() helpers are traditionally architecture specific, with the two main variants being the "access-ok.h" version that assumes unaligned pointer accesses always work on a particular architecture, and the "le-struct.h" version that casts the data to a byte aligned type before dereferencing, for architectures that cannot always do unaligned accesses in hardware. Based on the discussion linked below, it appears that the access-ok version is not realiable on any architecture, but the struct version probably has no downsides. This series changes the code to use the same implementation on all architectures, addressing the few exceptions separately" Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/ Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363 Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/ Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2 Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/ * tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: simplify asm/unaligned.h asm-generic: uaccess: 1-byte access is always aligned netpoll: avoid put_unaligned() on single character mwifiex: re-fix for unaligned accesses apparmor: use get_unaligned() only for multi-byte words partitions: msdos: fix one-byte get_unaligned() asm-generic: unaligned always use struct helpers asm-generic: unaligned: remove byteshift helpers powerpc: use linux/unaligned/le_struct.h on LE power7 m68k: select CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS sh: remove unaligned access for sh4a openrisc: always use unaligned-struct header asm-generic: use asm-generic/unaligned.h for most architectures
2021-07-01block: remove the bdgrab in blk_drop_partitionsChristoph Hellwig1-5/+1
There is no need to hold a bdev reference when removing the partition. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210701081638.246552-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-01block: grab a device refcount in disk_ueventChristoph Hellwig1-2/+2
Sending uevents requires the struct device to be alive. To ensure that grab the device refcount instead of just an inode reference. Fixes: bc359d03c7ec ("block: add a disk_uevent helper") Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210701081638.246552-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-01block: check disk exist before trying to add partitionYufen Yu1-7/+16
If disk have been deleted, we should return fail for ioctl BLKPG_DEL_PARTITION. Otherwise, the directory /sys/class/block may remain invalid symlinks file. The race as following: blkdev_open del_gendisk disk->flags &= ~GENHD_FL_UP; blk_drop_partitions blkpg_ioctl bdev_add_partition add_partition device_add device_add_class_symlinks ioctl may add_partition after del_gendisk() have tried to delete partitions. Then, symlinks file will be created. Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Link: https://lore.kernel.org/r/20210610023241.3646241-1-yuyufen@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-01Merge tag 'for-5.14/dm-changes' of ↵Linus Torvalds1-27/+92
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Various DM persistent-data library improvements and fixes that benefit both the DM thinp and cache targets. - A few small DM kcopyd efficiency improvements. - Significant zoned related block core, DM core and DM zoned target changes that culminate with adding zoned append emulation (which is required to properly fix DM crypt's zoned support). - Various DM writecache target changes that improve efficiency. Adds an optional "metadata_only" feature that only promotes bios flagged with REQ_META. But the most significant improvement is writecache's ability to pause writeback, for a confiurable time, if/when the working set is larger than the cache (and the cache is full) -- this ensures performance is no worse than the slower origin device. * tag 'for-5.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (35 commits) dm writecache: make writeback pause configurable dm writecache: pause writeback if cache full and origin being written directly dm io tracker: factor out IO tracker dm btree remove: assign new_root only when removal succeeds dm zone: fix dm_revalidate_zones() memory allocation dm ps io affinity: remove redundant continue statement dm writecache: add optional "metadata_only" parameter dm writecache: add "cleaner" and "max_age" to Documentation dm writecache: write at least 4k when committing dm writecache: flush origin device when writing and cache is full dm writecache: have ssd writeback wait if the kcopyd workqueue is busy dm writecache: use list_move instead of list_del/list_add in writecache_writeback() dm writecache: commit just one block, not a full page dm writecache: remove unused gfp_t argument from wc_add_block() dm crypt: Fix zoned block device support dm: introduce zone append emulation dm: rearrange core declarations for extended use from dm-zone.c block: introduce BIO_ZONE_WRITE_LOCKED bio flag block: introduce bio zone helpers block: improve handling of all zones reset operation ...
2021-07-01block: return errors from blk_execute_rq()Keith Busch1-2/+5
The synchronous blk_execute_rq() had not provided a way for its callers to know if its request was successful or not. Return the blk_status_t result of the request. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Link: https://lore.kernel.org/r/20210610214437.641245-4-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-01block: support polling through blk_execute_rqKeith Busch1-1/+17
Poll for completions if the request's hctx is a polling type. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Link: https://lore.kernel.org/r/20210610214437.641245-2-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-01block: remove REQ_OP_SCSI_{IN,OUT}Christoph Hellwig4-7/+5
With the legacy IDE driver gone drivers now use either REQ_OP_DRV_* or REQ_OP_SCSI_*, so unify the two concepts of passthrough requests into a single one. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-01block: mark blk_mq_init_queue_data staticChristoph Hellwig1-2/+1
All driver uses are gone now. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210624081012.256464-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-30Merge tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+1
Pull block driver updates from Jens Axboe: "Pretty calm round, mostly just NVMe and a bit of MD: - NVMe updates (via Christoph) - improve the APST configuration algorithm (Alexey Bogoslavsky) - look for StorageD3Enable on companion ACPI device (Mario Limonciello) - allow selecting the network interface for TCP connections (Martin Belanger) - misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King, Christoph) - move the ACPI StorageD3 code to drivers/acpi/ and add quirks for certain AMD CPUs (Mario Limonciello) - zoned device support for nvmet (Chaitanya Kulkarni) - fix the rules for changing the serial number in nvmet (Noam Gottlieb) - various small fixes and cleanups (Dan Carpenter, JK Kim, Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert Uytterhoeven, Daniel Wagner) - MD updates (Via Song) - iostats rewrite (Guoqing Jiang) - raid5 lock contention optimization (Gal Ofri) - Fall through warning fix (Gustavo) - Misc fixes (Gustavo, Jiapeng)" * tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits) nvmet: use NVMET_MAX_NAMESPACES to set nn value loop: Fix missing discard support when using LOOP_CONFIGURE nvme.h: add missing nvme_lba_range_type endianness annotations nvme: remove zeroout memset call for struct nvme-pci: remove zeroout memset call for struct nvmet: remove zeroout memset call for struct nvmet: add ZBD over ZNS backend support nvmet: add Command Set Identifier support nvmet: add nvmet_req_bio put helper for backends nvmet: add req cns error complete helper block: export blk_next_bio() nvmet: remove local variable nvmet: use nvme status value directly nvmet: use u32 type for the local variable nsid nvmet: use u32 for nvmet_subsys max_nsid nvmet: use req->cmd directly in file-ns fast path nvmet: use req->cmd directly in bdev-ns fast path nvmet: make ver stable once connection established nvmet: allow mn change if subsys not discovered nvmet: make sn stable once connection was established ...
2021-06-30Merge tag 'for-5.14/block-2021-06-29' of git://git.kernel.dk/linux-blockLinus Torvalds34-1757/+2911
Pull core block updates from Jens Axboe: - disk events cleanup (Christoph) - gendisk and request queue allocation simplifications (Christoph) - bdev_disk_changed cleanups (Christoph) - IO priority improvements (Bart) - Chained bio completion trace fix (Edward) - blk-wbt fixes (Jan) - blk-wbt enable/disable fix (Zhang) - Scheduler dispatch improvements (Jan, Ming) - Shared tagset scheduler improvements (John) - BFQ updates (Paolo, Luca, Pietro) - BFQ lock inversion fix (Jan) - Documentation improvements (Kir) - CLONE_IO block cgroup fix (Tejun) - Remove of ancient and deprecated block dump feature (zhangyi) - Discard merge fix (Ming) - Misc fixes or followup fixes (Colin, Damien, Dan, Long, Max, Thomas, Yang) * tag 'for-5.14/block-2021-06-29' of git://git.kernel.dk/linux-block: (129 commits) block: fix discard request merge block/mq-deadline: Remove a WARN_ON_ONCE() call blk-mq: update hctx->dispatch_busy in case of real scheduler blk: Fix lock inversion between ioc lock and bfqd lock bfq: Remove merged request already in bfq_requests_merged() block: pass a gendisk to bdev_disk_changed block: move bdev_disk_changed block: add the events* attributes to disk_attrs block: move the disk events code to a separate file block: fix trace completion for chained bio block/partitions/msdos: Fix typo inidicator -> indicator block, bfq: reset waker pointer with shared queues block, bfq: check waker only for queues with no in-flight I/O block, bfq: avoid delayed merge of async queues block, bfq: boost throughput by extending queue-merging times block, bfq: consider also creation time in delayed stable merge block, bfq: fix delayed stable merge check block, bfq: let also stably merged queues enjoy weight raising blk-wbt: make sure throttle is enabled properly blk-wbt: introduce a new disable state to prevent false positive by rwb_enabled() ...
2021-06-29block: fix discard request mergeMing Lei1-2/+6
ll_new_hw_segment() is reached only in case of single range discard merge, and we don't have max discard segment size limit actually, so it is wrong to run the following check: if (req->nr_phys_segments + nr_phys_segs > blk_rq_get_max_segments(req)) it may be always false since req->nr_phys_segments is initialized as one, and bio's segment count is still 1, blk_rq_get_max_segments(reg) is 1 too. Fix the issue by not doing the check and bypassing the calculation of discard request's nr_phys_segments. Based on analysis from Wang Shanker. Cc: Christoph Hellwig <hch@lst.de> Reported-by: Wang Shanker <shankerwangmiao@gmail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210628023312.1903255-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-28block/mq-deadline: Remove a WARN_ON_ONCE() callBart Van Assche1-1/+0
The purpose of the WARN_ON_ONCE() statement in dd_insert_request() is to verify that dd_prepare_request() cleared rq->elv.priv[0]. Since dd_prepare_request() is called during request initialization but not if a request is requeued, a warning is triggered if a request is requeued. Fix this by removing the WARN_ON_ONCE() statement. This patch suppresses the following kernel warning: WARNING: CPU: 28 PID: 432 at block/mq-deadline-main.c:740 dd_insert_request+0x4d4/0x5b0 Workqueue: kblockd blk_mq_requeue_work Call Trace: dd_insert_requests+0xfa/0x130 blk_mq_sched_insert_request+0x22c/0x240 blk_mq_requeue_work+0x21c/0x2d0 process_one_work+0x4c2/0xa70 worker_thread+0x2e5/0x6d0 kthread+0x21c/0x250 ret_from_fork+0x1f/0x30 Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Fixes: 08a9ad8bf607 ("block/mq-deadline: Add cgroup support") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210627211112.12720-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-25blk-mq: update hctx->dispatch_busy in case of real schedulerMing Lei1-3/+0
Commit 6e6fcbc27e77 ("blk-mq: support batching dispatch in case of io") starts to support io batching submission by using hctx->dispatch_busy. However, blk_mq_update_dispatch_busy() isn't changed to update hctx->dispatch_busy in that commit, so fix the issue by updating hctx->dispatch_busy in case of real scheduler. Reported-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Fixes: 6e6fcbc27e77 ("blk-mq: support batching dispatch in case of io") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210625020248.1630497-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-25blk: Fix lock inversion between ioc lock and bfqd lockJan Kara8-21/+41
Lockdep complains about lock inversion between ioc->lock and bfqd->lock: bfqd -> ioc: put_io_context+0x33/0x90 -> ioc->lock grabbed blk_mq_free_request+0x51/0x140 blk_put_request+0xe/0x10 blk_attempt_req_merge+0x1d/0x30 elv_attempt_insert_merge+0x56/0xa0 blk_mq_sched_try_insert_merge+0x4b/0x60 bfq_insert_requests+0x9e/0x18c0 -> bfqd->lock grabbed blk_mq_sched_insert_requests+0xd6/0x2b0 blk_mq_flush_plug_list+0x154/0x280 blk_finish_plug+0x40/0x60 ext4_writepages+0x696/0x1320 do_writepages+0x1c/0x80 __filemap_fdatawrite_range+0xd7/0x120 sync_file_range+0xac/0xf0 ioc->bfqd: bfq_exit_icq+0xa3/0xe0 -> bfqd->lock grabbed put_io_context_active+0x78/0xb0 -> ioc->lock grabbed exit_io_context+0x48/0x50 do_exit+0x7e9/0xdd0 do_group_exit+0x54/0xc0 To avoid this inversion we change blk_mq_sched_try_insert_merge() to not free the merged request but rather leave that upto the caller similarly to blk_mq_sched_try_merge(). And in bfq_insert_requests() we make sure to free all the merged requests after dropping bfqd->lock. Fixes: aee69d78dec0 ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler") Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210623093634.27879-3-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-25bfq: Remove merged request already in bfq_requests_merged()Jan Kara1-28/+13
Currently, bfq does very little in bfq_requests_merged() and handles all the request cleanup in bfq_finish_requeue_request() called from blk_mq_free_request(). That is currently safe only because blk_mq_free_request() is called shortly after bfq_requests_merged() while bfqd->lock is still held. However to fix a lock inversion between bfqd->lock and ioc->lock, we need to call blk_mq_free_request() after dropping bfqd->lock. That would mean that already merged request could be seen by other processes inside bfq queues and possibly dispatched to the device which is wrong. So move cleanup of the request from bfq_finish_requeue_request() to bfq_requests_merged(). Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210623093634.27879-2-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-24block: pass a gendisk to bdev_disk_changedChristoph Hellwig1-12/+10
bdev_disk_changed can only operate on whole devices. Make that clear by passing a gendisk instead of the struct block_device. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210624123240.441814-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-24block: move bdev_disk_changedChristoph Hellwig1-1/+54
Move bdev_disk_changed to block/partitions/core.c, together with the rest of the partition scanning code. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210624123240.441814-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-24block: add the events* attributes to disk_attrsChristoph Hellwig3-19/+10
Add the events attributes to the disk_attrs array, which ensures they are added by the driver core when the device is created rather than adding them after the device has been added, which is racy versus uevents and requires more boilerplate code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210624073843.251178-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-24block: move the disk events code to a separate fileChristoph Hellwig4-493/+491
Move the code for handling disk events from genhd.c into a new file as it isn't very related to the rest of the file while at the same time requiring lots of forward declarations. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210624073843.251178-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-24block: fix trace completion for chained bioEdward Hsieh1-7/+6
For chained bio, trace_block_bio_complete in bio_endio is currently called only by the parent bio once upon all chained bio completed. However, the sector and size for the parent bio are modified in bio_split. Therefore, the size and sector of the complete events might not match the queue events in blktrace. The original fix of bio completion trace <fbbaf700e7b1> ("block: trace completion of all bios.") wants multiple complete events to correspond to one queue event but missed this. The issue can be reproduced by md/raid5 read with bio cross chunks. To fix, move trace completion into the loop for every chained bio to call. Fixes: fbbaf700e7b1 ("block: trace completion of all bios.") Reviewed-by: Wade Liang <wadel@synology.com> Reviewed-by: BingJing Chang <bingjingc@synology.com> Signed-off-by: Edward Hsieh <edwardh@synology.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210624123030.27014-1-edwardh@synology.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/partitions/msdos: Fix typo inidicator -> indicatorThomas Bracht Laumann Jespersen1-1/+1
Just a fix for a small typo in msdos_partition(). Signed-off-by: Thomas Bracht Laumann Jespersen <t@laumann.xyz> Link: https://lore.kernel.org/r/20210619195130.19348-1-t@laumann.xyz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block, bfq: reset waker pointer with shared queuesPaolo Valente1-2/+4
Commit 85686d0dc194 ("block, bfq: keep shared queues out of the waker mechanism") leaves shared bfq_queues out of the waker-detection mechanism. It attains this goal by not updating the pointer last_completed_rq_bfqq, if the last request completed belongs to a shared bfq_queue (so that the pointer will not point to the shared bfq_queue). Yet this has a side effect: the pointer last_completed_rq_bfqq keeps pointing, deceptively, to a bfq_queue that actually is not the last one to have had a request completed. As a consequence, such a bfq_queue may deceptively be considered as a waker of some bfq_queue, even of some shared bfq_queue. To address this issue, reset last_completed_rq_bfqq if the last request completed belongs to a shared queue. Fixes: 85686d0dc194 ("block, bfq: keep shared queues out of the waker mechanism") Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20210619140948.98712-8-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block, bfq: check waker only for queues with no in-flight I/OPaolo Valente1-8/+13
Consider two bfq_queues, say Q1 and Q2, with Q2 empty. If a request of Q1 gets completed shortly before a new request arrives for Q2, then BFQ flags Q1 as a candidate waker for Q2. Yet, the arrival of this new request may have a different cause, in the following case. If also Q2 has requests in flight while waiting for the arrival of a new request, then the completion of its own requests may be the actual cause of the awakening of the process that sends I/O to Q2. So Q1 may be flagged wrongly as a candidate waker. This commit avoids this deceptive flagging, by disabling candidate-waker flagging for Q2, if Q2 has in-flight I/O. Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20210619140948.98712-7-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block, bfq: avoid delayed merge of async queuesPaolo Valente1-1/+7
Since commit 430a67f9d616 ("block, bfq: merge bursts of newly-created queues"), BFQ may schedule a merge between a newly created sync bfq_queue, say Q2, and the last sync bfq_queue created, say Q1. To this goal, BFQ stores the address of Q1 in the field bic->stable_merge_bfqq of the bic associated with Q2. So, when the time for the possible merge arrives, BFQ knows which bfq_queue to merge Q2 with. In particular, BFQ checks for possible merges on request arrivals. Yet the same bic may also be associated with an async bfq_queue, say Q3. So, if a request for Q3 arrives, then the above check may happen to be executed while the bfq_queue at hand is Q3, instead of Q2. In this case, Q1 happens to be merged with an async bfq_queue. This is not only a conceptual mistake, because async queues are to be kept out of queue merging, but also a bug that leads to inconsistent states. This commits simply filters async queues out of delayed merges. Fixes: 430a67f9d616 ("block, bfq: merge bursts of newly-created queues") Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20210619140948.98712-6-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block, bfq: boost throughput by extending queue-merging timesPietro Pedroni1-3/+13
One of the methods with which bfq boosts throughput is by merging queues. One of the merging variants in bfq is the stable merge. This mechanism is activated between two queues only if they are created within a certain maximum time T1 from each other. Merging can happen soon or be delayed. In the second case, before merging, bfq needs to evaluate a throughput-boost parameter that indicates whether the queue generates a high throughput is served alone. Merging occurs when this throughput-boost is not high enough. In particular, this parameter is evaluated and late merging may occur only after at least a time T2 from the creation of the queue. Currently T1 and T2 are set to 180ms and 200ms, respectively. In this way the merging mechanism rarely occurs because time is not enough. This results in a noticeable lowering of the overall throughput with some workloads (see the example below). This commit introduces two constants bfq_activation_stable_merging and bfq_late_stable_merging in order to increase the duration of T1 and T2. Both the stable merging activation time and the late merging time are set to 600ms. This value has been experimentally evaluated using sqlite benchmark in the Phoronix Test Suite on a HDD. The duration of the benchmark before this fix was 111.02s, while now it has reached 97.02s, a better result than that of all the other schedulers. Signed-off-by: Pietro Pedroni <pedroni.pietro.96@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20210619140948.98712-5-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block, bfq: consider also creation time in delayed stable mergePaolo Valente1-1/+3
Since commit 430a67f9d616 ("block, bfq: merge bursts of newly-created queues"), BFQ may schedule a merge between a newly created sync bfq_queue and the last sync bfq_queue created. Such a merging is not performed immediately, because BFQ needs first to find out whether the newly created queue actually reaches a higher throughput if not merged at all (and in that case BFQ will not perform any stable merging). To check that, a little time must be waited after the creation of the new queue, so that some I/O can flow in the queue, and statistics on such I/O can be computed. Yet, to evaluate the above waiting time, the last split time is considered as start time, instead of the creation time of the queue. This is a mistake, because considering the split time is correct only in the following scenario. The queue undergoes a non-stable merges on the arrival of its very first I/O request, due to close I/O with some other queue. While the queue is merged for close I/O, stable merging is not considered. Yet the queue may then happen to be split, if the close I/O finishes (or happens to be a false positive). From this time on, the queue can again be considered for stable merging. But, again, a little time must elapse, to let some new I/O flow in the queue and to get updated statistics. To wait for this time, the split time is to be taken into account. Yet, if the queue does not undergo a non-stable merge on the arrival of its very first request, then BFQ immediately checks whether the stable merge is to be performed. It happens because the split time for a queue is initialized to minus infinity when the queue is created. This commit fixes this mistake by adding the missing condition. Now the check for delayed stable-merge is performed after a little time is elapsed not only from the last queue split time, but also from the creation time of the queue. Fixes: 430a67f9d616 ("block, bfq: merge bursts of newly-created queues") Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20210619140948.98712-4-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block, bfq: fix delayed stable merge checkLuca Mariotti1-1/+1
When attempting to schedule a merge of a given bfq_queue with the currently in-service bfq_queue or with a cooperating bfq_queue among the scheduled bfq_queues, delayed stable merge is checked for rotational or non-queueing devs. For this stable merge to be performed, some conditions must be met. If the current bfq_queue underwent some split from some merged bfq_queue, one of these conditions is that two hundred milliseconds must elapse from split, otherwise this condition is always met. Unfortunately, by mistake, time_is_after_jiffies() was written instead of time_is_before_jiffies() for this check, verifying that less than two hundred milliseconds have elapsed instead of verifying that at least two hundred milliseconds have elapsed. Fix this issue by replacing time_is_after_jiffies() with time_is_before_jiffies(). Signed-off-by: Luca Mariotti <mariottiluca1@hotmail.it> Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: Pietro Pedroni <pedroni.pietro.96@gmail.com> Link: https://lore.kernel.org/r/20210619140948.98712-3-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block, bfq: let also stably merged queues enjoy weight raisingPaolo Valente1-1/+14
Merged bfq_queues are kept out of weight-raising (low-latency) mechanisms. The reason is that these queues are usually created for non-interactive and non-soft-real-time tasks. Yet this is not the case for stably-merged queues. These queues are merged just because they are created shortly after each other. So they may easily serve the I/O of an interactive or soft-real time application, if the application happens to spawn multiple processes. To address this issue, this commits lets also stably-merged queued enjoy weight raising. Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20210619140948.98712-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22blk-wbt: make sure throttle is enabled properlyZhang Yi1-1/+5
After commit a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt"), if throttle was disabled by wbt_disable_default(), we could not enable again, fix this by set enable_state back to WBT_STATE_ON_DEFAULT. Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20210619093700.920393-3-yi.zhang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22blk-wbt: introduce a new disable state to prevent false positive by ↵Zhang Yi2-2/+4
rwb_enabled() Now that we disable wbt by simply zero out rwb->wb_normal in wbt_disable_default() when switch elevator to bfq, but it's not safe because it will become false positive if we change queue depth. If it become false positive between wbt_wait() and wbt_track() when submit write request, it will lead to drop rqw->inflight to -1 in wbt_done(), which will end up trigger IO hung. Fix this issue by introduce a new state which mean the wbt was disabled. Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20210619093700.920393-2-yi.zhang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Prioritize high-priority requestsBart Van Assche1-5/+37
While one or more requests with a certain I/O priority are pending, do not dispatch lower priority requests. Dispatch lower priority requests anyway after the "aging" time has expired. This patch has been tested as follows: modprobe scsi_debug ndelay=1000000 max_queue=16 && sd='' && while [ -z "$sd" ]; do sd=/dev/$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done && echo $((100*1000)) > /sys/block/$sd/queue/iosched/aging_expire && cd /sys/fs/cgroup/blkio/ && echo $$ >cgroup.procs && echo restrict-to-be >blkio.prio.class && mkdir -p hipri && cd hipri && echo none-to-rt >blkio.prio.class && { max-iops -a1 -d32 -j1 -e mq-deadline $sd >& ~/low-pri.txt & } && echo $$ >cgroup.procs && max-iops -a1 -d32 -j1 -e mq-deadline $sd >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-17-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Add cgroup supportBart Van Assche5-14/+308
Maintain statistics per cgroup and export these to user space. These statistics are essential for verifying whether the proper I/O priorities have been assigned to requests. An example of the statistics data with this patch applied: $ cat /sys/fs/cgroup/io.stat 11:2 rbytes=0 wbytes=0 rios=3 wios=0 dbytes=0 dios=0 [NONE] dispatched=0 inserted=0 merged=171 [RT] dispatched=0 inserted=0 merged=0 [BE] dispatched=0 inserted=0 merged=0 [IDLE] dispatched=0 inserted=0 merged=0 8:32 rbytes=2142720 wbytes=0 rios=105 wios=0 dbytes=0 dios=0 [NONE] dispatched=0 inserted=0 merged=171 [RT] dispatched=0 inserted=0 merged=0 [BE] dispatched=0 inserted=0 merged=0 [IDLE] dispatched=0 inserted=0 merged=0 Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-16-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Track I/O statisticsBart Van Assche1-0/+100
Track I/O statistics per I/O priority and export these statistics to debugfs. These statistics help developers of the deadline scheduler. Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-15-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Add I/O priority supportBart Van Assche1-114/+228
Maintain one dispatch list and one FIFO list per I/O priority class: RT, BE and IDLE. Maintain statistics for each priority level. Split the debugfs attributes per priority level as follows: $ ls /sys/kernel/debug/block/.../sched/ async_depth dispatch2 read_next_rq write2_fifo_list batching read0_fifo_list starved write_next_rq dispatch0 read1_fifo_list write0_fifo_list dispatch1 read2_fifo_list write1_fifo_list Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-14-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Micro-optimize the batching algorithmBart Van Assche1-6/+5
When dispatching the first request of a batch, the deadline_move_request() call clears .next_rq[] for the opposite data direction. .next_rq[] is not restored when changing data direction. Fix this by not clearing .next_rq[] and by keeping track of the data direction of a batch in a variable instead. This patch is a micro-optimization because: - The number of deadline_next_request() calls for the read direction is halved. - The number of times that deadline_next_request() returns NULL is reduced. Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-13-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Reserve 25% of scheduler tags for synchronous requestsBart Van Assche1-0/+55
For interactive workloads it is important that synchronous requests are not delayed. Hence reserve 25% of scheduler tags for synchronous requests. This patch still allows asynchronous requests to fill the hardware queues since blk_mq_init_sched() makes sure that the number of scheduler requests is the double of the hardware queue depth. From blk_mq_init_sched(): q->nr_requests = 2 * min_t(unsigned int, q->tag_set->queue_depth, BLKDEV_MAX_RQ); Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-12-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Improve the sysfs show and store macrosBart Van Assche1-37/+29
Define separate macros for integers and jiffies to improve readability. Use sysfs_emit() and kstrtoint() instead of sprintf() and simple_strtol(). The former functions are the recommended functions. Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-11-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Improve compile-time argument checkingBart Van Assche1-47/+49
Modern compilers complain if an out-of-range value is passed to a function argument that has an enumeration type. Let the compiler detect out-of-range data direction arguments instead of verifying the data_dir argument at runtime. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-10-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Rename dd_init_queue() and dd_exit_queue()Bart Van Assche1-4/+4
Change "queue" into "sched" to make the function names reflect better the purpose of these functions. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-9-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Remove two local variablesBart Van Assche1-6/+2
Make __dd_dispatch_request() easier to read by removing two local variables. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-8-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Add two lockdep_assert_held() statementsBart Van Assche1-0/+4
Document the locking strategy by adding two lockdep_assert_held() statements. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-7-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Add several commentsBart Van Assche1-0/+18
Make the code easier to read by adding more comments. Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-6-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block: Introduce the ioprio rq-qos policyBart Van Assche7-0/+299
Introduce an rq-qos policy that assigns an I/O priority to requests based on blk-cgroup configuration settings. This policy has the following advantages over the ioprio_set() system call: - This policy is cgroup based so it has all the advantages of cgroups. - While ioprio_set() does not affect page cache writeback I/O, this rq-qos controller affects page cache writeback I/O for filesystems that support assiociating a cgroup with writeback I/O. See also Documentation/admin-guide/cgroup-v2.rst. Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-5-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/blk-rq-qos: Move a function from a header file into a C fileBart Van Assche2-13/+13
rq_qos_id_to_name() is only used in blk-mq-debugfs.c so move that function into in blk-mq-debugfs.c. Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Link: https://lore.kernel.org/r/20210618004456.7280-4-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>