summaryrefslogtreecommitdiff
path: root/certs
AgeCommit message (Collapse)AuthorFilesLines
2019-11-12certs: Add wrapper function to check blacklisted binary hashNayna Jain1-0/+9
The -EKEYREJECTED error returned by existing is_hash_blacklisted() is misleading when called for checking against blacklisted hash of a binary. This patch adds a wrapper function is_binary_blacklisted() to return -EPERM error if binary is blacklisted. Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1572492694-6520-7-git-send-email-zohar@linux.ibm.com
2019-08-06PKCS#7: Refactor verify_pkcs7_signature()Thiago Jung Bauermann1-16/+45
IMA will need to verify a PKCS#7 signature which has already been parsed. For this reason, factor out the code which does that from verify_pkcs7_signature() into a new function which takes a struct pkcs7_message instead of a data buffer. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-07-11Revert "Merge tag 'keys-acl-20190703' of ↵Linus Torvalds2-5/+14
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs" This reverts merge 0f75ef6a9cff49ff612f7ce0578bced9d0b38325 (and thus effectively commits 7a1ade847596 ("keys: Provide KEYCTL_GRANT_PERMISSION") 2e12256b9a76 ("keys: Replace uid/gid/perm permissions checking with an ACL") that the merge brought in). It turns out that it breaks booting with an encrypted volume, and Eric biggers reports that it also breaks the fscrypt tests [1] and loading of in-kernel X.509 certificates [2]. The root cause of all the breakage is likely the same, but David Howells is off email so rather than try to work it out it's getting reverted in order to not impact the rest of the merge window. [1] https://lore.kernel.org/lkml/20190710011559.GA7973@sol.localdomain/ [2] https://lore.kernel.org/lkml/20190710013225.GB7973@sol.localdomain/ Link: https://lore.kernel.org/lkml/CAHk-=wjxoeMJfeBahnWH=9zShKp2bsVy527vo3_y8HfOdhwAAw@mail.gmail.com/ Reported-by: Eric Biggers <ebiggers@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-09Merge tag 'keys-acl-20190703' of ↵Linus Torvalds2-14/+5
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyring ACL support from David Howells: "This changes the permissions model used by keys and keyrings to be based on an internal ACL by the following means: - Replace the permissions mask internally with an ACL that contains a list of ACEs, each with a specific subject with a permissions mask. Potted default ACLs are available for new keys and keyrings. ACE subjects can be macroised to indicate the UID and GID specified on the key (which remain). Future commits will be able to add additional subject types, such as specific UIDs or domain tags/namespaces. Also split a number of permissions to give finer control. Examples include splitting the revocation permit from the change-attributes permit, thereby allowing someone to be granted permission to revoke a key without allowing them to change the owner; also the ability to join a keyring is split from the ability to link to it, thereby stopping a process accessing a keyring by joining it and thus acquiring use of possessor permits. - Provide a keyctl to allow the granting or denial of one or more permits to a specific subject. Direct access to the ACL is not granted, and the ACL cannot be viewed" * tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Provide KEYCTL_GRANT_PERMISSION keys: Replace uid/gid/perm permissions checking with an ACL
2019-07-09Merge tag 'keys-namespace-20190627' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyring namespacing from David Howells: "These patches help make keys and keyrings more namespace aware. Firstly some miscellaneous patches to make the process easier: - Simplify key index_key handling so that the word-sized chunks assoc_array requires don't have to be shifted about, making it easier to add more bits into the key. - Cache the hash value in the key so that we don't have to calculate on every key we examine during a search (it involves a bunch of multiplications). - Allow keying_search() to search non-recursively. Then the main patches: - Make it so that keyring names are per-user_namespace from the point of view of KEYCTL_JOIN_SESSION_KEYRING so that they're not accessible cross-user_namespace. keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEYRING_NAME for this. - Move the user and user-session keyrings to the user_namespace rather than the user_struct. This prevents them propagating directly across user_namespaces boundaries (ie. the KEY_SPEC_* flags will only pick from the current user_namespace). - Make it possible to include the target namespace in which the key shall operate in the index_key. This will allow the possibility of multiple keys with the same description, but different target domains to be held in the same keyring. keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEY_TAG for this. - Make it so that keys are implicitly invalidated by removal of a domain tag, causing them to be garbage collected. - Institute a network namespace domain tag that allows keys to be differentiated by the network namespace in which they operate. New keys that are of a type marked 'KEY_TYPE_NET_DOMAIN' are assigned the network domain in force when they are created. - Make it so that the desired network namespace can be handed down into the request_key() mechanism. This allows AFS, NFS, etc. to request keys specific to the network namespace of the superblock. This also means that the keys in the DNS record cache are thenceforth namespaced, provided network filesystems pass the appropriate network namespace down into dns_query(). For DNS, AFS and NFS are good, whilst CIFS and Ceph are not. Other cache keyrings, such as idmapper keyrings, also need to set the domain tag - for which they need access to the network namespace of the superblock" * tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Pass the network namespace into request_key mechanism keys: Network namespace domain tag keys: Garbage collect keys for which the domain has been removed keys: Include target namespace in match criteria keys: Move the user and user-session keyrings to the user_namespace keys: Namespace keyring names keys: Add a 'recurse' flag for keyring searches keys: Cache the hash value to avoid lots of recalculation keys: Simplify key description management
2019-06-28keys: Replace uid/gid/perm permissions checking with an ACLDavid Howells2-14/+5
Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-26keys: Add a 'recurse' flag for keyring searchesDavid Howells1-1/+1
Add a 'recurse' flag for keyring searches so that the flag can be omitted and recursion disabled, thereby allowing just the nominated keyring to be searched and none of the children. Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 36Thomas Gleixner2-10/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public licence as published by the free software foundation either version 2 of the licence or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 114 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170857.552531963@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-05kexec, KEYS: Make use of platform keyring for signature verifyKairui Song1-1/+12
This patch allows the kexec_file_load syscall to verify the PE signed kernel image signature based on the preboot keys stored in the .platform keyring, as fall back, if the signature verification failed due to not finding the public key in the secondary or builtin keyrings. This commit adds a VERIFY_USE_PLATFORM_KEYRING similar to previous VERIFY_USE_SECONDARY_KEYRING indicating that verify_pkcs7_signature should verify the signature using platform keyring. Also, decrease the error message log level when verification failed with -ENOKEY, so that if called tried multiple time with different keyring it won't generate extra noises. Signed-off-by: Kairui Song <kasong@redhat.com> Cc: David Howells <dhowells@redhat.com> Acked-by: Dave Young <dyoung@redhat.com> (for kexec_file_load part) [zohar@linux.ibm.com: tweaked the first paragraph of the patch description, and fixed checkpatch warning.] Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-02-05integrity, KEYS: add a reference to platform keyringKairui Song1-0/+10
commit 9dc92c45177a ("integrity: Define a trusted platform keyring") introduced a .platform keyring for storing preboot keys, used for verifying kernel image signatures. Currently only IMA-appraisal is able to use the keyring to verify kernel images that have their signature stored in xattr. This patch exposes the .platform keyring, making it accessible for verifying PE signed kernel images as well. Suggested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Kairui Song <kasong@redhat.com> Cc: David Howells <dhowells@redhat.com> [zohar@linux.ibm.com: fixed checkpatch errors, squashed with patch fix] Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-01-06kbuild: remove redundant target cleaning on failureMasahiro Yamada1-1/+1
Since commit 9c2af1c7377a ("kbuild: add .DELETE_ON_ERROR special target"), the target file is automatically deleted on failure. The boilerplate code ... || { rm -f $@; false; } is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-22export.h: remove VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR()Masahiro Yamada1-8/+8
With the special case handling for Blackfin and Metag was removed by commit 94e58e0ac312 ("export.h: remove code for prefixing symbols with underscore"), VMLINUX_SYMBOL() is no-op. Replace the remaining usages, then remove the definition of VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-16Replace magic for trusting the secondary keyring with #defineYannik Sembritzki1-1/+2
Replace the use of a magic number that indicates that verify_*_signature() should use the secondary keyring with a symbol. Signed-off-by: Yannik Sembritzki <yannik@sembritzki.me> Signed-off-by: David Howells <dhowells@redhat.com> Cc: keyrings@vger.kernel.org Cc: linux-security-module@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-26certs/blacklist: fix const confusionNick Desaulniers1-1/+1
Fixes commit 2be04df5668d ("certs/blacklist_nohashes.c: fix const confusion in certs blacklist") Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2018-06-16docs: Fix some broken referencesMauro Carvalho Chehab1-1/+1
As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-02-22certs/blacklist_nohashes.c: fix const confusion in certs blacklistAndi Kleen1-1/+1
const must be marked __initconst, not __initdata. Link: http://lkml.kernel.org/r/20171222001335.1987-1-andi@firstfloor.org Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman5-0/+5
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-14modsign: add markers to endif-statements in certs/MakefileJarkko Sakkinen1-3/+3
It's a bit hard for eye to track certs/Makefile if you are not accustomed to it. This commit adds comments to key endif statements in order to help to keep the context while reading this file. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-05-09scripts/spelling.txt: add "intialise(d)" pattern and fix typo instancesMasahiro Yamada1-1/+1
Fix typos and add the following to the scripts/spelling.txt: intialisation||initialisation intialised||initialised intialise||initialise This commit does not intend to change the British spelling itself. Link: http://lkml.kernel.org/r/1481573103-11329-18-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-05KEYS: Use structure to capture key restriction function and dataMat Martineau1-1/+20
Replace struct key's restrict_link function pointer with a pointer to the new struct key_restriction. The structure contains pointers to the restriction function as well as relevant data for evaluating the restriction. The garbage collector checks restrict_link->keytype when key types are unregistered. Restrictions involving a removed key type are converted to use restrict_link_reject so that restrictions cannot be removed by unregistering key types. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
2017-04-03KEYS: Split role of the keyring pointer for keyring restrict functionsMat Martineau1-7/+11
The first argument to the restrict_link_func_t functions was a keyring pointer. These functions are called by the key subsystem with this argument set to the destination keyring, but restrict_link_by_signature expects a pointer to the relevant trusted keyring. Restrict functions may need something other than a single struct key pointer to allow or reject key linkage, so the data used to make that decision (such as the trust keyring) is moved to a new, fourth argument. The first argument is now always the destination keyring. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
2017-04-03KEYS: Add a system blacklist keyringDavid Howells6-0/+212
Add the following: (1) A new system keyring that is used to store information about blacklisted certificates and signatures. (2) A new key type (called 'blacklist') that is used to store a blacklisted hash in its description as a hex string. The key accepts no payload. (3) The ability to configure a list of blacklisted hashes into the kernel at build time. This is done by setting CONFIG_SYSTEM_BLACKLIST_HASH_LIST to the filename of a list of hashes that are in the form: "<hash>", "<hash>", ..., "<hash>" where each <hash> is a hex string representation of the hash and must include all necessary leading zeros to pad the hash to the right size. The above are enabled with CONFIG_SYSTEM_BLACKLIST_KEYRING. Once the kernel is booted, the blacklist keyring can be listed: root@andromeda ~]# keyctl show %:.blacklist Keyring 723359729 ---lswrv 0 0 keyring: .blacklist 676257228 ---lswrv 0 0 \_ blacklist: 123412341234c55c1dcc601ab8e172917706aa32fb5eaf826813547fdf02dd46 The blacklist cannot currently be modified by userspace, but it will be possible to load it, for example, from the UEFI blacklist database. A later commit will make it possible to load blacklisted asymmetric keys in here too. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-12certs: Add a secondary system keyring that can be added to dynamicallyDavid Howells2-16/+79
Add a secondary system keyring that can be added to by root whilst the system is running - provided the key being added is vouched for by a key built into the kernel or already added to the secondary keyring. Rename .system_keyring to .builtin_trusted_keys to distinguish it more obviously from the new keyring (called .secondary_trusted_keys). The new keyring needs to be enabled with CONFIG_SECONDARY_TRUSTED_KEYRING. If the secondary keyring is enabled, a link is created from that to .builtin_trusted_keys so that the the latter will automatically be searched too if the secondary keyring is searched. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-12KEYS: Remove KEY_FLAG_TRUSTED and KEY_ALLOC_TRUSTEDDavid Howells1-2/+0
Remove KEY_FLAG_TRUSTED and KEY_ALLOC_TRUSTED as they're no longer meaningful. Also we can drop the trusted flag from the preparse structure. Given this, we no longer need to pass the key flags through to restrict_link(). Further, we can now get rid of keyring_restrict_trusted_only() also. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-12KEYS: Move the point of trust determination to __key_link()David Howells1-3/+17
Move the point at which a key is determined to be trustworthy to __key_link() so that we use the contents of the keyring being linked in to to determine whether the key being linked in is trusted or not. What is 'trusted' then becomes a matter of what's in the keyring. Currently, the test is done when the key is parsed, but given that at that point we can only sensibly refer to the contents of the system trusted keyring, we can only use that as the basis for working out the trustworthiness of a new key. With this change, a trusted keyring is a set of keys that once the trusted-only flag is set cannot be added to except by verification through one of the contained keys. Further, adding a key into a trusted keyring, whilst it might grant trustworthiness in the context of that keyring, does not automatically grant trustworthiness in the context of a second keyring to which it could be secondarily linked. To accomplish this, the authentication data associated with the key source must now be retained. For an X.509 cert, this means the contents of the AuthorityKeyIdentifier and the signature data. If system keyrings are disabled then restrict_link_by_builtin_trusted() resolves to restrict_link_reject(). The integrity digital signature code still works correctly with this as it was previously using KEY_FLAG_TRUSTED_ONLY, which doesn't permit anything to be added if there is no system keyring against which trust can be determined. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-12KEYS: Make the system trusted keyring depend on the asymmetric key typeDavid Howells1-0/+1
Make the system trusted keyring depend on the asymmetric key type as there's not a lot of point having it if you can't then load asymmetric keys onto it. This requires the ASYMMETRIC_KEY_TYPE to be made a bool, not a tristate, as the Kconfig language doesn't then correctly force ASYMMETRIC_KEY_TYPE to 'y' rather than 'm' if SYSTEM_TRUSTED_KEYRING is 'y'. Making SYSTEM_TRUSTED_KEYRING *select* ASYMMETRIC_KEY_TYPE instead doesn't work as the Kconfig interpreter then wrongly complains about dependency loops. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-12KEYS: Add a facility to restrict new links into a keyringDavid Howells1-4/+4
Add a facility whereby proposed new links to be added to a keyring can be vetted, permitting them to be rejected if necessary. This can be used to block public keys from which the signature cannot be verified or for which the signature verification fails. It could also be used to provide blacklisting. This affects operations like add_key(), KEYCTL_LINK and KEYCTL_INSTANTIATE. To this end: (1) A function pointer is added to the key struct that, if set, points to the vetting function. This is called as: int (*restrict_link)(struct key *keyring, const struct key_type *key_type, unsigned long key_flags, const union key_payload *key_payload), where 'keyring' will be the keyring being added to, key_type and key_payload will describe the key being added and key_flags[*] can be AND'ed with KEY_FLAG_TRUSTED. [*] This parameter will be removed in a later patch when KEY_FLAG_TRUSTED is removed. The function should return 0 to allow the link to take place or an error (typically -ENOKEY, -ENOPKG or -EKEYREJECTED) to reject the link. The pointer should not be set directly, but rather should be set through keyring_alloc(). Note that if called during add_key(), preparse is called before this method, but a key isn't actually allocated until after this function is called. (2) KEY_ALLOC_BYPASS_RESTRICTION is added. This can be passed to key_create_or_update() or key_instantiate_and_link() to bypass the restriction check. (3) KEY_FLAG_TRUSTED_ONLY is removed. The entire contents of a keyring with this restriction emplaced can be considered 'trustworthy' by virtue of being in the keyring when that keyring is consulted. (4) key_alloc() and keyring_alloc() take an extra argument that will be used to set restrict_link in the new key. This ensures that the pointer is set before the key is published, thus preventing a window of unrestrictedness. Normally this argument will be NULL. (5) As a temporary affair, keyring_restrict_trusted_only() is added. It should be passed to keyring_alloc() as the extra argument instead of setting KEY_FLAG_TRUSTED_ONLY on a keyring. This will be replaced in a later patch with functions that look in the appropriate places for authoritative keys. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-04-06PKCS#7: Make trust determination dependent on contents of trust keyringDavid Howells1-9/+4
Make the determination of the trustworthiness of a key dependent on whether a key that can verify it is present in the supplied ring of trusted keys rather than whether or not the verifying key has KEY_FLAG_TRUSTED set. verify_pkcs7_signature() will return -ENOKEY if the PKCS#7 message trust chain cannot be verified. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-06KEYS: Generalise system_verify_data() to provide access to internal contentDavid Howells1-10/+35
Generalise system_verify_data() to provide access to internal content through a callback. This allows all the PKCS#7 stuff to be hidden inside this function and removed from the PE file parser and the PKCS#7 test key. If external content is not required, NULL should be passed as data to the function. If the callback is not required, that can be set to NULL. The function is now called verify_pkcs7_signature() to contrast with verify_pefile_signature() and the definitions of both have been moved into linux/verification.h along with the key_being_used_for enum. Signed-off-by: David Howells <dhowells@redhat.com>
2016-02-29certs: Fix misaligned data in extra certificate listDavid Howells1-0/+1
Fix the following warning found by kbuild: certs/system_certificates.S:24: Error: misaligned data because: KEYS: Reserve an extra certificate symbol for inserting without recompiling doesn't correctly align system_extra_cert_used. Signed-off-by: David Howells <dhowells@redhat.com> cc: Mehmet Kayaalp <mkayaalp@linux.vnet.ibm.com>
2016-02-26KEYS: Reserve an extra certificate symbol for inserting without recompilingMehmet Kayaalp2-0/+28
Place a system_extra_cert buffer of configurable size, right after the system_certificate_list, so that inserted keys can be readily processed by the existing mechanism. Added script takes a key file and a kernel image and inserts its contents to the reserved area. The system_certificate_list_size is also adjusted accordingly. Call the script as: scripts/insert-sys-cert -b <vmlinux> -c <certfile> If vmlinux has no symbol table, supply System.map file with -s flag. Subsequent runs replace the previously inserted key, instead of appending the new one. Signed-off-by: Mehmet Kayaalp <mkayaalp@linux.vnet.ibm.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-02-26modsign: hide openssl output in silent buildsArnd Bergmann1-14/+19
When a user calls 'make -s', we can assume they don't want to see any output except for warnings and errors, but instead they see this for a warning free build: ### ### Now generating an X.509 key pair to be used for signing modules. ### ### If this takes a long time, you might wish to run rngd in the ### background to keep the supply of entropy topped up. It ### needs to be run as root, and uses a hardware random ### number generator if one is available. ### Generating a 4096 bit RSA private key .................................................................................................................................................................................................................................++ ..............................................................................................................................++ writing new private key to 'certs/signing_key.pem' ----- ### ### Key pair generated. ### The output can confuse simple build testing scripts that just check for an empty build log. This patch silences all the output: - "echo" is changed to "@$(kecho)", which is dropped when "-s" gets passed - the openssl command itself is only printed with V=1, using the $(Q) macro - The output of openssl gets redirected to /dev/null on "-s" builds. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com>
2016-02-09KEYS: Add an alloc flag to convey the builtinness of a keyDavid Howells1-2/+2
Add KEY_ALLOC_BUILT_IN to convey that a key should have KEY_FLAG_BUILTIN set rather than setting it after the fact. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-10-21certs: add .gitignore to stop git nagging about x509_certificate_listPaul Gortmaker1-0/+4
Currently we see this in "git status" if we build in the source dir: Untracked files: (use "git add <file>..." to include in what will be committed) certs/x509_certificate_list It looks like it used to live in kernel/ so we squash that .gitignore entry at the same time. I didn't bother to dig through git history to see when it moved, since it is just a minor annoyance at most. Cc: David Woodhouse <dwmw2@infradead.org> Cc: keyrings@linux-nfs.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David Howells <dhowells@redhat.com>
2015-08-14modsign: Handle signing key in source treeDavid Woodhouse1-54/+0
Since commit 1329e8cc69 ("modsign: Extract signing cert from CONFIG_MODULE_SIG_KEY if needed"), the build system has carefully coped with the signing key being specified as a relative path in either the source or or the build trees. However, the actual signing of modules has not worked if the filename is relative to the source tree. Fix that by moving the config_filename helper into scripts/Kbuild.include so that it can be used from elsewhere, and then using it in the top-level Makefile to find the signing key file. Kill the intermediate $(MODPUBKEY) and $(MODSECKEY) variables too, while we're at it. There's no need for them. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David Howells <dhowells@redhat.com>
2015-08-14modsign: Use if_changed rule for extracting cert from module signing keyDavid Woodhouse1-2/+3
We couldn't use if_changed for this before, because it didn't live in the kernel/ directory so we couldn't add it to $(targets). It was easier just to leave it as it was. Now it's in the certs/ directory we can use if_changed, the same as we do for the trusted certificate list. Aside from making things consistent, this means we don't need to depend explicitly on the include/config/module/sig/key.h file. And we also get to automatically do the right thing and re-extract the cert if the user does odd things like using a relative filename and then playing silly buggers with adding/removing that file in both the source and object trees. We always favour the one in the object tree if it exists, and now we'll correctly re-extract the cert when it changes. Previously we'd *only* re-extract the cert if the config option changed, even if the actual file we're using did change. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David Howells <dhowells@redhat.com>
2015-08-14Move certificate handling to its own directoryDavid Howells4-0/+369
Move certificate handling out of the kernel/ directory and into a certs/ directory to get all the weird stuff in one place and move the generated signing keys into this directory. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>