Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
|
|
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
These cases were done with this Coccinelle:
@@
expression H;
expression L;
@@
- (get_random_u32_below(H) + L)
+ get_random_u32_inclusive(L, H + L - 1)
@@
expression H;
expression L;
expression E;
@@
get_random_u32_inclusive(L,
H
- + E
- - E
)
@@
expression H;
expression L;
expression E;
@@
get_random_u32_inclusive(L,
H
- - E
- + E
)
@@
expression H;
expression L;
expression E;
expression F;
@@
get_random_u32_inclusive(L,
H
- - E
+ F
- + E
)
@@
expression H;
expression L;
expression E;
expression F;
@@
get_random_u32_inclusive(L,
H
- + E
+ F
- - E
)
And then subsequently cleaned up by hand, with several automatic cases
rejected if it didn't make sense contextually.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This is a simple mechanical transformation done by:
@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value,
simply use the get_random_{u8,u16}() functions, which are faster than
wasting the additional bytes from a 32-bit value. This was done
mechanically with this coccinelle script:
@@
expression E;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u16;
typedef __be16;
typedef __le16;
typedef u8;
@@
(
- (get_random_u32() & 0xffff)
+ get_random_u16()
|
- (get_random_u32() & 0xff)
+ get_random_u8()
|
- (get_random_u32() % 65536)
+ get_random_u16()
|
- (get_random_u32() % 256)
+ get_random_u8()
|
- (get_random_u32() >> 16)
+ get_random_u16()
|
- (get_random_u32() >> 24)
+ get_random_u8()
|
- (u16)get_random_u32()
+ get_random_u16()
|
- (u8)get_random_u32()
+ get_random_u8()
|
- (__be16)get_random_u32()
+ (__be16)get_random_u16()
|
- (__le16)get_random_u32()
+ (__le16)get_random_u16()
|
- prandom_u32_max(65536)
+ get_random_u16()
|
- prandom_u32_max(256)
+ get_random_u8()
|
- E->inet_id = get_random_u32()
+ E->inet_id = get_random_u16()
)
@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u16;
identifier v;
@@
- u16 v = get_random_u32();
+ u16 v = get_random_u16();
@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u8;
identifier v;
@@
- u8 v = get_random_u32();
+ u8 v = get_random_u8();
@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u16;
u16 v;
@@
- v = get_random_u32();
+ v = get_random_u16();
@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u8;
u8 v;
@@
- v = get_random_u32();
+ v = get_random_u8();
// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@
((T)get_random_u32()@p & (LITERAL))
// Examine limits
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@
value = None
if literal.startswith('0x'):
value = int(literal, 16)
elif literal[0] in '123456789':
value = int(literal, 10)
if value is None:
print("I don't know how to handle %s" % (literal))
cocci.include_match(False)
elif value < 256:
coccinelle.RESULT = cocci.make_ident("get_random_u8")
elif value < 65536:
coccinelle.RESULT = cocci.make_ident("get_random_u16")
else:
print("Skipping large mask of %s" % (literal))
cocci.include_match(False)
// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
identifier add_one.RESULT;
identifier FUNC;
@@
- (FUNC()@p & (LITERAL))
+ (RESULT() & LITERAL)
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done mechanically with this coccinelle script:
@basic@
expression E;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u64;
@@
(
- ((T)get_random_u32() % (E))
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ((E) - 1))
+ prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2)
|
- ((u64)(E) * get_random_u32() >> 32)
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ~PAGE_MASK)
+ prandom_u32_max(PAGE_SIZE)
)
@multi_line@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
identifier RAND;
expression E;
@@
- RAND = get_random_u32();
... when != RAND
- RAND %= (E);
+ RAND = prandom_u32_max(E);
// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@
((T)get_random_u32()@p & (LITERAL))
// Add one to the literal.
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@
value = None
if literal.startswith('0x'):
value = int(literal, 16)
elif literal[0] in '123456789':
value = int(literal, 10)
if value is None:
print("I don't know how to handle %s" % (literal))
cocci.include_match(False)
elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1:
print("Skipping 0x%x for cleanup elsewhere" % (value))
cocci.include_match(False)
elif value & (value + 1) != 0:
print("Skipping 0x%x because it's not a power of two minus one" % (value))
cocci.include_match(False)
elif literal.startswith('0x'):
coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1))
else:
coccinelle.RESULT = cocci.make_expr("%d" % (value + 1))
// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
expression add_one.RESULT;
identifier FUNC;
@@
- (FUNC()@p & (LITERAL))
+ prandom_u32_max(RESULT)
@collapse_ret@
type T;
identifier VAR;
expression E;
@@
{
- T VAR;
- VAR = (E);
- return VAR;
+ return E;
}
@drop_var@
type T;
identifier VAR;
@@
{
- T VAR;
... when != VAR
}
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Set right indentation for test_acomp().
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This userspace command:
modprobe tcrypt
or
modprobe tcrypt mode=0
runs all the tcrypt test cases numbered <200 (i.e., all the
test cases calling tcrypt_test() and returning return values).
Tests are sparsely numbered from 0 to 1000. For example:
modprobe tcrypt mode=12
tests sha512, and
modprobe tcrypt mode=152
tests rfc4543(gcm(aes))) - AES-GCM as GMAC
The test manager generates WARNING crashdumps every time it attempts
a test using an algorithm that is not available (not built-in to the
kernel or available as a module):
alg: skcipher: failed to allocate transform for ecb(arc4): -2
------------[ cut here ]-----------
alg: self-tests for ecb(arc4) (ecb(arc4)) failed (rc=-2)
WARNING: CPU: 9 PID: 4618 at crypto/testmgr.c:5777
alg_test+0x30b/0x510
[50 more lines....]
---[ end trace 0000000000000000 ]---
If the kernel is compiled with CRYPTO_USER_API_ENABLE_OBSOLETE
disabled (the default), then these algorithms are not compiled into
the kernel or made into modules and trigger WARNINGs:
arc4 tea xtea khazad anubis xeta seed
Additionally, any other algorithms that are not enabled in .config
will generate WARNINGs. In RHEL 9.0, for example, the default
selection of algorithms leads to 16 WARNING dumps.
One attempt to fix this was by modifying tcrypt_test() to check
crypto_has_alg() and immediately return 0 if crypto_has_alg() fails,
rather than proceed and return a non-zero error value that causes
the caller (alg_test() in crypto/testmgr.c) to invoke WARN().
That knocks out too many algorithms, though; some combinations
like ctr(des3_ede) would work.
Instead, change the condition on the WARN to ignore a return
value is ENOENT, which is the value returned when the algorithm
or combination of algorithms doesn't exist. Add a pr_warn to
communicate that information in case the WARN is skipped.
This approach allows algorithm tests to work that are combinations,
not provided by one driver, like ctr(blowfish).
Result - no more WARNINGs:
modprobe tcrypt
[ 115.541765] tcrypt: testing md5
[ 115.556415] tcrypt: testing sha1
[ 115.570463] tcrypt: testing ecb(des)
[ 115.585303] cryptomgr: alg: skcipher: failed to allocate transform for ecb(des): -2
[ 115.593037] cryptomgr: alg: self-tests for ecb(des) using ecb(des) failed (rc=-2)
[ 115.593038] tcrypt: testing cbc(des)
[ 115.610641] cryptomgr: alg: skcipher: failed to allocate transform for cbc(des): -2
[ 115.618359] cryptomgr: alg: self-tests for cbc(des) using cbc(des) failed (rc=-2)
...
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Acomp API supports NULL destination buffer for compression
and decompression requests. In such cases allocation is
performed by API.
Add test cases for crypto_acomp_compress() and crypto_acomp_decompress()
with dst buffer allocated by API.
Tests will only run if CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It contains ARIA ecb(aria), cbc(aria), cfb(aria), ctr(aria), and gcm(aria).
ecb testvector is from RFC standard.
cbc, cfb, and ctr testvectors are from KISA[1], who developed ARIA
algorithm.
gcm(aria) is from openssl test vector.
[1] https://seed.kisa.or.kr/kisa/kcmvp/EgovVerification.do (Korean)
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
BLAKE2s has no currently known use as an shash. Just remove all of this
unnecessary plumbing. Removing this shash was something we talked about
back when we were making BLAKE2s a built-in, but I simply never got
around to doing it. So this completes that project.
Importantly, this fixs a bug in which the lib code depends on
crypto_simd_disabled_for_test, causing linker errors.
Also add more alignment tests to the selftests and compare SIMD and
non-SIMD compression functions, to make up for what we lose from
testmgr.c.
Reported-by: gaochao <gaochao49@huawei.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 6048fdcc5f26 ("lib/crypto: blake2s: include as built-in")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for HCTR2 as a template. HCTR2 is a length-preserving
encryption mode that is efficient on processors with instructions to
accelerate AES and carryless multiplication, e.g. x86 processors with
AES-NI and CLMUL, and ARM processors with the ARMv8 Crypto Extensions.
As a length-preserving encryption mode, HCTR2 is suitable for
applications such as storage encryption where ciphertext expansion is
not possible, and thus authenticated encryption cannot be used.
Currently, such applications usually use XTS, or in some cases Adiantum.
XTS has the disadvantage that it is a narrow-block mode: a bitflip will
only change 16 bytes in the resulting ciphertext or plaintext. This
reveals more information to an attacker than necessary.
HCTR2 is a wide-block mode, so it provides a stronger security property:
a bitflip will change the entire message. HCTR2 is somewhat similar to
Adiantum, which is also a wide-block mode. However, HCTR2 is designed
to take advantage of existing crypto instructions, while Adiantum
targets devices without such hardware support. Adiantum is also
designed with longer messages in mind, while HCTR2 is designed to be
efficient even on short messages.
HCTR2 requires POLYVAL and XCTR as components. More information on
HCTR2 can be found here: "Length-preserving encryption with HCTR2":
https://eprint.iacr.org/2021/1441.pdf
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for POLYVAL, an ε-Δ-universal hash function similar to
GHASH. This patch only uses POLYVAL as a component to implement HCTR2
mode. It should be noted that POLYVAL was originally specified for use
in AES-GCM-SIV (RFC 8452), but the kernel does not currently support
this mode.
POLYVAL is implemented as an shash algorithm. The implementation is
modified from ghash-generic.c.
For more information on POLYVAL see:
Length-preserving encryption with HCTR2:
https://eprint.iacr.org/2021/1441.pdf
AES-GCM-SIV: Nonce Misuse-Resistant Authenticated Encryption:
https://datatracker.ietf.org/doc/html/rfc8452
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a generic implementation of XCTR mode as a template. XCTR is a
blockcipher mode similar to CTR mode. XCTR uses XORs and little-endian
addition rather than big-endian arithmetic which has two advantages: It
is slightly faster on little-endian CPUs and it is less likely to be
implemented incorrect since integer overflows are not possible on
practical input sizes. XCTR is used as a component to implement HCTR2.
More information on XCTR mode can be found in the HCTR2 paper:
https://eprint.iacr.org/2021/1441.pdf
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As was established in the thread
https://lore.kernel.org/linux-crypto/20220223080400.139367-1-gilad@benyossef.com/T/#u,
many crypto API users doing in-place en/decryption don't use the same
scatterlist pointers for the source and destination, but rather use
separate scatterlists that point to the same memory. This case isn't
tested by the self-tests, resulting in bugs.
This is the natural usage of the crypto API in some cases, so requiring
API users to avoid this usage is not reasonable.
Therefore, update the self-tests to start testing this case.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull block layer 64-bit data integrity support from Jens Axboe:
"This adds support for 64-bit data integrity in the block layer and in
NVMe"
* tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block:
crypto: fix crc64 testmgr digest byte order
nvme: add support for enhanced metadata
block: add pi for extended integrity
crypto: add rocksoft 64b crc guard tag framework
lib: add rocksoft model crc64
linux/kernel: introduce lower_48_bits function
asm-generic: introduce be48 unaligned accessors
nvme: allow integrity on extended metadata formats
block: support pi with extended metadata
|
|
Hardware specific features may be able to calculate a crc64, so provide
a framework for drivers to register their implementation. If nothing is
registered, fallback to the generic table lookup implementation. The
implementation is modeled after the crct10dif equivalent.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220303201312.3255347-7-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
SP800-56Arev3, sec. 5.5.2 ("Assurance of Domain-Parameter Validity")
asserts that an implementation needs to verify domain paramtere validity,
which boils down to either
- the domain parameters corresponding to some known safe-prime group
explicitly listed to be approved in the document or
- for parameters conforming to a "FIPS 186-type parameter-size set",
that the implementation needs to perform an explicit domain parameter
verification, which would require access to the "seed" and "counter"
values used in their generation.
The latter is not easily feasible and moreover, SP800-56Arev3 states that
safe-prime groups are preferred and that FIPS 186-type parameter sets
should only be supported for backward compatibility, if it all.
Mark "dh" as not fips_allowed in testmgr. Note that the safe-prime
ffdheXYZ(dh) wrappers are not affected by this change: as these enforce
some approved safe-prime group each, their usage is still allowed in FIPS
mode.
This change will effectively render the keyctl(KEYCTL_DH_COMPUTE) syscall
unusable in FIPS mode, but it has been brought up that this might even be
a good thing ([1]).
[1] https://lore.kernel.org/r/20211217055227.GA20698@gondor.apana.org.au
Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently we do not distinguish between algorithms that fail on
the self-test vs. those which are disabled in FIPS mode (not allowed).
Both are marked as having failed the self-test.
Recently the need arose to allow the usage of certain algorithms only
as arguments to specific template instantiations in FIPS mode. For
example, standalone "dh" must be blocked, but e.g. "ffdhe2048(dh)" is
allowed. Other potential use cases include "cbcmac(aes)", which must
only be used with ccm(), or "ghash", which must be used only for
gcm().
This patch allows this scenario by adding a new flag FIPS_INTERNAL to
indicate those algorithms that are not FIPS-allowed. They can then be
used as template arguments only, i.e. when looked up via
crypto_grab_spawn() to be more specific. The FIPS_INTERNAL bit gets
propagated upwards recursively into the surrounding template
instances, until the construction eventually matches an explicit
testmgr entry with ->fips_allowed being set, if any.
The behaviour to skip !->fips_allowed self-test executions in FIPS
mode will be retained. Note that this effectively means that
FIPS_INTERNAL algorithms are handled very similarly to the INTERNAL
ones in this regard. It is expected that the FIPS_INTERNAL algorithms
will receive sufficient testing when the larger constructions they're
a part of, if any, get exercised by testmgr.
Note that as a side-effect of this patch algorithms which are not
FIPS-allowed will now return ENOENT instead of ELIBBAD. Hopefully
this is not an issue as some people were relying on this already.
Link: https://lore.kernel.org/r/YeEVSaMEVJb3cQkq@gondor.apana.org.au
Originally-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add known answer tests for the ffdhe2048(dh), ffdhe3072(dh), ffdhe4096(dh),
ffdhe6144(dh) and ffdhe8192(dh) templates introduced with the previous
patch to the testmgr. All TVs have been generated with OpenSSL.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
By adding the support for the flag fips_skip, hash / HMAC test vectors
may be marked to be not applicable in FIPS mode. Such vectors are
silently skipped in FIPS mode.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As testmgr is part of cryptomgr which was designed to be unloadable
as a module, it shouldn't export any symbols for other crypto
modules to use as that would prevent it from being unloaded. All
its functionality is meant to be accessed through notifiers.
The symbol crypto_simd_disabled_for_test was added to testmgr
which caused it to be pinned as a module if its users were also
loaded. This patch moves it out of testmgr and into crypto/algapi.c
so cryptomgr can again be unloaded and replaced on demand.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On Dec 31 2023 NIST sunsets TDES for FIPS use. To prevent FIPS
validations to be completed in the future to be affected by the TDES
sunsetting, disallow TDES already now. Otherwise a FIPS validation would
need to be "touched again" end 2023 to handle TDES accordingly.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
crypto_disable_simd_for_test() disables preemption in order to receive a
stable per-CPU variable which it needs to modify in order to alter
crypto_simd_usable() results.
This can also be achived by migrate_disable() which forbidds CPU
migrations but allows the task to be preempted. The latter is important
for PREEMPT_RT since operation like skcipher_walk_first() may allocate
memory which must not happen with disabled preemption on PREEMPT_RT.
Use migrate_disable() in crypto_disable_simd_for_test() to achieve a
stable per-CPU pointer.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The GCM/CCM mode of the SM4 algorithm is defined in the rfc 8998
specification, and the test case data also comes from rfc 8998.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Considering that the HMAC(SHA-512) DRBG is the default DRBG now, a self
test is to be provided.
The test vector is obtained from a successful NIST ACVP test run.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add test vector params for NIST P384, add test vector for
NIST P384 on vector of tests.
Vector param from:
https://datatracker.ietf.org/doc/html/rfc5903#section-3.1
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a comment that p192 will fail to register in FIPS mode.
Fix ecdh-nist-p192's entry in testmgr by removing the ifdefs
and not setting fips_allowed.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This pulls in the NIST P384/256/192 x509 changes.
|
|
Register NIST P384 as an akcipher and extend the testmgr with
NIST P384-specific test vectors.
Summary of changes:
* crypto/ecdsa.c
- add ecdsa_nist_p384_init_tfm
- register and unregister P384 tfm
* crypto/testmgr.c
- add test vector for P384 on vector of tests
* crypto/testmgr.h
- add test vector params for P384(sha1, sha224, sha256, sha384
and sha512)
Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for parsing the parameters of a NIST P256 or NIST P192 key.
Enable signature verification using these keys. The new module is
enabled with CONFIG_ECDSA:
Elliptic Curve Digital Signature Algorithm (NIST P192, P256 etc.)
is A NIST cryptographic standard algorithm. Only signature verification
is implemented.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
1. crypto and crypto/atmel-ecc:
Move curve id of ECDH from the key into the algorithm name instead
in crypto and atmel-ecc, so ECDH algorithm name change form 'ecdh'
to 'ecdh-nist-pxxx', and we cannot use 'curve_id' in 'struct ecdh';
2. crypto/testmgr and net/bluetooth:
Modify 'testmgr.c', 'testmgr.h' and 'net/bluetooth' to adapt
the modification.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Delete sg_data function, because sg_data function definition same as
sg_virt(), so need to delete it and use sg_virt() replace to sg_data().
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It is not trivial to trace back why exactly the tnepres variant of
serpent was added ~17 years ago - Google searches come up mostly empty,
but it seems to be related with the 'kerneli' version, which was based
on an incorrect interpretation of the serpent spec.
In other words, nobody is likely to care anymore today, so let's get rid
of it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Salsa20 is not used anywhere in the kernel, is not suitable for disk
encryption, and widely considered to have been superseded by ChaCha20.
So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Tiger is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
RIPE-MD 320 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
RIPE-MD 256 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
RIPE-MD 128 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The cipher routines in the crypto API are mostly intended for templates
implementing skcipher modes generically in software, and shouldn't be
used outside of the crypto subsystem. So move the prototypes and all
related definitions to a new header file under include/crypto/internal.
Also, let's use the new module namespace feature to move the symbol
exports into a new namespace CRYPTO_INTERNAL.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently, by default crypto self-test failures only result in a
pr_warn() message and an "unknown" status in /proc/crypto. Both of
these are easy to miss. There is also an option to panic the kernel
when a test fails, but that can't be the default behavior.
A crypto self-test failure always indicates a kernel bug, however, and
there's already a standard way to report (recoverable) kernel bugs --
the WARN() family of macros. WARNs are noisier and harder to miss, and
existing test systems already know to look for them in dmesg or via
/proc/sys/kernel/tainted.
Therefore, call WARN() when an algorithm fails its self-tests.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When alg_test() is called from tcrypt.ko rather than from the algorithm
registration code, "driver" is actually the algorithm name, not the
driver name. So it shouldn't be used in places where a driver name is
wanted, e.g. when reporting a test failure or when checking whether the
driver is the generic driver or not.
Fix this for the skcipher algorithm tests by getting the driver name
from the crypto_skcipher that actually got allocated.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When alg_test() is called from tcrypt.ko rather than from the algorithm
registration code, "driver" is actually the algorithm name, not the
driver name. So it shouldn't be used in places where a driver name is
wanted, e.g. when reporting a test failure or when checking whether the
driver is the generic driver or not.
Fix this for the AEAD algorithm tests by getting the driver name from
the crypto_aead that actually got allocated.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When alg_test() is called from tcrypt.ko rather than from the algorithm
registration code, "driver" is actually the algorithm name, not the
driver name. So it shouldn't be used in places where a driver name is
wanted, e.g. when reporting a test failure or when checking whether the
driver is the generic driver or not.
Fix this for the hash algorithm tests by getting the driver name from
the crypto_ahash or crypto_shash that actually got allocated.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add testmgr test vectors for SM2 algorithm. These vectors come
from `openssl pkeyutl -sign` and libgcrypt.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When the 'key' allocation fails, the 'req' will not be released,
which will cause memory leakage on this path. This patch adds a
'free_req' tag used to solve this problem, and two new err values
are added to reflect the real reason of the error.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Some asymmetric algorithms will get different ciphertext after
each encryption, such as SM2, and let testmgr support the testing
of such algorithms.
In struct akcipher_testvec, set c and c_size to be empty, skip
the comparison of the ciphertext, and compare the decrypted
plaintext with m to achieve the test purpose.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The header file algapi.h includes skbuff.h unnecessarily since
all we need is a forward declaration for struct sk_buff. This
patch removes that inclusion.
Unfortunately skbuff.h pulls in a lot of things and drivers over
the years have come to rely on it so this patch adds a lot of
missing inclusions that result from this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As said by Linus:
A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.
In "kzalloc()", the z is meaningful and an important part of what the
caller wants.
In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.
The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.
Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.
The renaming is done by using the command sequence:
git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'
followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.
[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Fix out-of-sync IVs in self-test for IPsec AEAD algorithms
Algorithms:
- Use formally verified implementation of x86/curve25519
Drivers:
- Enhance hwrng support in caam
- Use crypto_engine for skcipher/aead/rsa/hash in caam
- Add Xilinx AES driver
- Add uacce driver
- Register zip engine to uacce in hisilicon
- Add support for OCTEON TX CPT engine in marvell"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
crypto: af_alg - bool type cosmetics
crypto: arm[64]/poly1305 - add artifact to .gitignore files
crypto: caam - limit single JD RNG output to maximum of 16 bytes
crypto: caam - enable prediction resistance in HRWNG
bus: fsl-mc: add api to retrieve mc version
crypto: caam - invalidate entropy register during RNG initialization
crypto: caam - check if RNG job failed
crypto: caam - simplify RNG implementation
crypto: caam - drop global context pointer and init_done
crypto: caam - use struct hwrng's .init for initialization
crypto: caam - allocate RNG instantiation descriptor with GFP_DMA
crypto: ccree - remove duplicated include from cc_aead.c
crypto: chelsio - remove set but not used variable 'adap'
crypto: marvell - enable OcteonTX cpt options for build
crypto: marvell - add the Virtual Function driver for CPT
crypto: marvell - add support for OCTEON TX CPT engine
crypto: marvell - create common Kconfig and Makefile for Marvell
crypto: arm/neon - memzero_explicit aes-cbc key
crypto: bcm - Use scnprintf() for avoiding potential buffer overflow
crypto: atmel-i2c - Fix wakeup fail
...
|