summaryrefslogtreecommitdiff
path: root/crypto
AgeCommit message (Collapse)AuthorFilesLines
2022-06-21Merge tag 'certs-20220621' of ↵Linus Torvalds6-1/+309
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull signature checking selftest from David Howells: "The signature checking code, as used by module signing, kexec, etc., is non-FIPS compliant as there is no selftest. For a kernel to be FIPS-compliant, signature checking would have to be tested before being used, and the box would need to panic if it's not available (probably reasonable as simply disabling signature checking would prevent you from loading any driver modules). Deal with this by adding a minimal test. This is split into two patches: the first moves load_certificate_list() to the same place as the X.509 code to make it more accessible internally; the second adds a selftest" * tag 'certs-20220621' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: certs: Add FIPS selftests certs: Move load_certificate_list() to be with the asymmetric keys code
2022-06-21certs: Add FIPS selftestsDavid Howells5-1/+251
Add some selftests for signature checking when FIPS mode is enabled. These need to be done before we start actually using the signature checking for things and must panic the kernel upon failure. Note that the tests must not check the blacklist lest this provide a way to prevent a kernel from booting by installing a hash of a test key in the appropriate UEFI table. Reported-by: Simo Sorce <simo@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Simo Sorce <simo@redhat.com> Reviewed-by: Herbert Xu <herbert@gondor.apana.org.au> cc: keyrings@vger.kernel.org cc: linux-crypto@vger.kernel.org Link: https://lore.kernel.org/r/165515742832.1554877.2073456606206090838.stgit@warthog.procyon.org.uk/
2022-06-21certs: Move load_certificate_list() to be with the asymmetric keys codeDavid Howells2-0/+58
Move load_certificate_list(), which loads a series of binary X.509 certificates from a blob and inserts them as keys into a keyring, to be with the asymmetric keys code that it drives. This makes it easier to add FIPS selftest code in which we need to load up a private keyring for the tests to use. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Simo Sorce <simo@redhat.com> Reviewed-by: Herbert Xu <herbert@gondor.apana.org.au> cc: keyrings@vger.kernel.org cc: linux-crypto@vger.kernel.org Link: https://lore.kernel.org/r/165515742145.1554877.13488098107542537203.stgit@warthog.procyon.org.uk/
2022-06-12crypto: memneq - move into lib/Jason A. Donenfeld3-177/+2
This is used by code that doesn't need CONFIG_CRYPTO, so move this into lib/ with a Kconfig option so that it can be selected by whatever needs it. This fixes a linker error Zheng pointed out when CRYPTO_MANAGER_DISABLE_TESTS!=y and CRYPTO=m: lib/crypto/curve25519-selftest.o: In function `curve25519_selftest': curve25519-selftest.c:(.init.text+0x60): undefined reference to `__crypto_memneq' curve25519-selftest.c:(.init.text+0xec): undefined reference to `__crypto_memneq' curve25519-selftest.c:(.init.text+0x114): undefined reference to `__crypto_memneq' curve25519-selftest.c:(.init.text+0x154): undefined reference to `__crypto_memneq' Reported-by: Zheng Bin <zhengbin13@huawei.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: stable@vger.kernel.org Fixes: aa127963f1ca ("crypto: lib/curve25519 - re-add selftests") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-05-28Merge tag 'v5.19-p1' of ↵Linus Torvalds8-36/+525
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Test in-place en/decryption with two sglists in testmgr - Fix process vs softirq race in cryptd Algorithms: - Add arm64 acceleration for sm4 - Add s390 acceleration for chacha20 Drivers: - Add polarfire soc hwrng support in mpsf - Add support for TI SoC AM62x in sa2ul - Add support for ATSHA204 cryptochip in atmel-sha204a - Add support for PRNG in caam - Restore support for storage encryption in qat - Restore support for storage encryption in hisilicon/sec" * tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits) hwrng: omap3-rom - fix using wrong clk_disable() in omap_rom_rng_runtime_resume() crypto: hisilicon/sec - delete the flag CRYPTO_ALG_ALLOCATES_MEMORY crypto: qat - add support for 401xx devices crypto: qat - re-enable registration of algorithms crypto: qat - honor CRYPTO_TFM_REQ_MAY_SLEEP flag crypto: qat - add param check for DH crypto: qat - add param check for RSA crypto: qat - remove dma_free_coherent() for DH crypto: qat - remove dma_free_coherent() for RSA crypto: qat - fix memory leak in RSA crypto: qat - add backlog mechanism crypto: qat - refactor submission logic crypto: qat - use pre-allocated buffers in datapath crypto: qat - set to zero DH parameters before free crypto: s390 - add crypto library interface for ChaCha20 crypto: talitos - Uniform coding style with defined variable crypto: octeontx2 - simplify the return expression of otx2_cpt_aead_cbc_aes_sha_setkey() crypto: cryptd - Protect per-CPU resource by disabling BH. crypto: sun8i-ce - do not fallback if cryptlen is less than sg length crypto: sun8i-ce - rework debugging ...
2022-05-23certs: Factor out the blacklist hash creationMickaël Salaün1-1/+2
Factor out the blacklist hash creation with the get_raw_hash() helper. This also centralize the "tbs" and "bin" prefixes and make them private, which help to manage them consistently. Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Eric Snowberg <eric.snowberg@oracle.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com> Link: https://lore.kernel.org/r/20210712170313.884724-5-mic@digikod.net Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2022-05-13crypto: cryptd - Protect per-CPU resource by disabling BH.Sebastian Andrzej Siewior1-12/+11
The access to cryptd_queue::cpu_queue is synchronized by disabling preemption in cryptd_enqueue_request() and disabling BH in cryptd_queue_worker(). This implies that access is allowed from BH. If cryptd_enqueue_request() is invoked from preemptible context _and_ soft interrupt then this can lead to list corruption since cryptd_enqueue_request() is not protected against access from soft interrupt. Replace get_cpu() in cryptd_enqueue_request() with local_bh_disable() to ensure BH is always disabled. Remove preempt_disable() from cryptd_queue_worker() since it is not needed because local_bh_disable() ensures synchronisation. Fixes: 254eff771441 ("crypto: cryptd - Per-CPU thread implementation...") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-04-29crypto: ecrdsa - Fix incorrect use of vli_cmpVitaly Chikunov1-4/+4
Correctly compare values that shall be greater-or-equal and not just greater. Fixes: 0d7a78643f69 ("crypto: ecrdsa - add EC-RDSA (GOST 34.10) algorithm") Cc: <stable@vger.kernel.org> Signed-off-by: Vitaly Chikunov <vt@altlinux.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-04-08crypto: testmgr - test in-place en/decryption with two sglistsEric Biggers1-12/+63
As was established in the thread https://lore.kernel.org/linux-crypto/20220223080400.139367-1-gilad@benyossef.com/T/#u, many crypto API users doing in-place en/decryption don't use the same scatterlist pointers for the source and destination, but rather use separate scatterlists that point to the same memory. This case isn't tested by the self-tests, resulting in bugs. This is the natural usage of the crypto API in some cases, so requiring API users to avoid this usage is not reasonable. Therefore, update the self-tests to start testing this case. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-04-08crypto: engine - Add parameter description in crypto_transfer_request() ↵Yang Li1-0/+1
kernel-doc comment Add the description of @need_pump in crypto_transfer_request() kernel-doc comment to remove warning found by running scripts/kernel-doc, which is caused by using 'make W=1'. crypto/crypto_engine.c:260: warning: Function parameter or member 'need_pump' not described in 'crypto_transfer_request' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-04-08crypto: sm4 - export sm4 constant arraysTianjia Zhang1-1/+9
Export the constant arrays fk, ck, sbox of the SM4 algorithm, and add the 'crypto_sm4_' prefix, where sbox is used in the SM4 NEON implementation for the tbl/tbx instruction to replace the S-BOX, and the fk, ck arrays are used in the SM4 CE implementation. Use the sm4ekey instruction to speed up key expansion operations. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-04-08crypto: sm3,sm4 - move into crypto directoryJason A. Donenfeld4-8/+438
The lib/crypto libraries live in lib because they are used by various drivers of the kernel. In contrast, the various helper functions in crypto are there because they're used exclusively by the crypto API. The SM3 and SM4 helper functions were erroniously moved into lib/crypto/ instead of crypto/, even though there are no in-kernel users outside of the crypto API of those functions. This commit moves them into crypto/. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-26Merge tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-blockLinus Torvalds5-0/+117
Pull block layer 64-bit data integrity support from Jens Axboe: "This adds support for 64-bit data integrity in the block layer and in NVMe" * tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block: crypto: fix crc64 testmgr digest byte order nvme: add support for enhanced metadata block: add pi for extended integrity crypto: add rocksoft 64b crc guard tag framework lib: add rocksoft model crc64 linux/kernel: introduce lower_48_bits function asm-generic: introduce be48 unaligned accessors nvme: allow integrity on extended metadata formats block: support pi with extended metadata
2022-03-23crypto: fix crc64 testmgr digest byte orderKeith Busch1-2/+2
The result is set in little endian, so the expected digest needs to be consistent for big endian machines. Fixes: f3813f4b287e ("crypto: add rocksoft 64b crc guard tag framework") Reported-by: Vasily Gorbik <gor@linux.ibm.com> Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20220322142107.4581-1-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-22Merge branch 'linus' of ↵Linus Torvalds23-466/+2396
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - hwrng core now credits for low-quality RNG devices. Algorithms: - Optimisations for neon aes on arm/arm64. - Add accelerated crc32_be on arm64. - Add ffdheXYZ(dh) templates. - Disallow hmac keys < 112 bits in FIPS mode. - Add AVX assembly implementation for sm3 on x86. Drivers: - Add missing local_bh_disable calls for crypto_engine callback. - Ensure BH is disabled in crypto_engine callback path. - Fix zero length DMA mappings in ccree. - Add synchronization between mailbox accesses in octeontx2. - Add Xilinx SHA3 driver. - Add support for the TDES IP available on sama7g5 SoC in atmel" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (137 commits) crypto: xilinx - Turn SHA into a tristate and allow COMPILE_TEST MAINTAINERS: update HPRE/SEC2/TRNG driver maintainers list crypto: dh - Remove the unused function dh_safe_prime_dh_alg() hwrng: nomadik - Change clk_disable to clk_disable_unprepare crypto: arm64 - cleanup comments crypto: qat - fix initialization of pfvf rts_map_msg structures crypto: qat - fix initialization of pfvf cap_msg structures crypto: qat - remove unneeded assignment crypto: qat - disable registration of algorithms crypto: hisilicon/qm - fix memset during queues clearing crypto: xilinx: prevent probing on non-xilinx hardware crypto: marvell/octeontx - Use swap() instead of open coding it crypto: ccree - Fix use after free in cc_cipher_exit() crypto: ccp - ccp_dmaengine_unregister release dma channels crypto: octeontx2 - fix missing unlock hwrng: cavium - fix NULL but dereferenced coccicheck error crypto: cavium/nitrox - don't cast parameter in bit operations crypto: vmx - add missing dependencies MAINTAINERS: Add maintainer for Xilinx ZynqMP SHA3 driver crypto: xilinx - Add Xilinx SHA3 driver ...
2022-03-14crypto: dh - Remove the unused function dh_safe_prime_dh_alg()Jiapeng Chong1-6/+0
Fix the following W=1 kernel warnings: crypto/dh.c:311:31: warning: unused function 'dh_safe_prime_dh_alg' [-Wunused-function] Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-10KEYS: asymmetric: properly validate hash_algo and encodingEric Biggers1-35/+76
It is insecure to allow arbitrary hash algorithms and signature encodings to be used with arbitrary signature algorithms. Notably, ECDSA, ECRDSA, and SM2 all sign/verify raw hash values and don't disambiguate between different hash algorithms like RSA PKCS#1 v1.5 padding does. Therefore, they need to be restricted to certain sets of hash algorithms (ideally just one, but in practice small sets are used). Additionally, the encoding is an integral part of modern signature algorithms, and is not supposed to vary. Therefore, tighten the checks of hash_algo and encoding done by software_key_determine_akcipher(). Also rearrange the parameters to software_key_determine_akcipher() to put the public_key first, as this is the most important parameter and it often determines everything else. Fixes: 299f561a6693 ("x509: Add support for parsing x509 certs with ECDSA keys") Fixes: 215525639631 ("X.509: support OSCCA SM2-with-SM3 certificate verification") Fixes: 0d7a78643f69 ("crypto: ecrdsa - add EC-RDSA (GOST 34.10) algorithm") Cc: stable@vger.kernel.org Tested-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Vitaly Chikunov <vt@altlinux.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2022-03-10KEYS: asymmetric: enforce that sig algo matches key algoEric Biggers3-12/+15
Most callers of public_key_verify_signature(), including most indirect callers via verify_signature() as well as pkcs7_verify_sig_chain(), don't check that public_key_signature::pkey_algo matches public_key::pkey_algo. These should always match. However, a malicious signature could intentionally declare an unintended algorithm. It is essential that such signatures be rejected outright, or that the algorithm of the *key* be used -- not the algorithm of the signature as that would allow attackers to choose the algorithm used. Currently, public_key_verify_signature() correctly uses the key's algorithm when deciding which akcipher to allocate. That's good. However, it uses the signature's algorithm when deciding whether to do the first step of SM2, which is incorrect. Also, v4.19 and older kernels used the signature's algorithm for the entire process. Prevent such errors by making public_key_verify_signature() enforce that the signature's algorithm (if given) matches the key's algorithm. Also remove two checks of this done by callers, which are now redundant. Cc: stable@vger.kernel.org Tested-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Vitaly Chikunov <vt@altlinux.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2022-03-08KEYS: remove support for asym_tpm keysEric Biggers5-1097/+0
asym_tpm keys are tied to TPM v1.2, which uses outdated crypto and has been deprecated in favor of TPM v2.0 for over 7 years. A very quick look at this code also immediately found some memory safety bugs (https://lore.kernel.org/r/20220113235440.90439-2-ebiggers@kernel.org). Note that this code is reachable by unprivileged users. According to Jarkko (one of the keyrings subsystem maintainers), this code has no practical use cases, and he isn't willing to maintain it (https://lore.kernel.org/r/YfFZPbKkgYJGWu1Q@iki.fi). Therefore, let's remove it. Note that this feature didn't have any documentation or tests, so we don't need to worry about removing those. Cc: David Howells <dhowells@redhat.com> Cc: Denis Kenzior <denkenz@gmail.com> Cc: James Morris <jmorris@namei.org> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2022-03-08KEYS: x509: remove dead code that set ->unsupported_sigEric Biggers1-9/+0
The X.509 parser always sets cert->sig->pkey_algo and cert->sig->hash_algo on success, since x509_note_sig_algo() is a mandatory action in the X.509 ASN.1 grammar, and it returns an error if the signature's algorithm is unknown. Thus, remove the dead code which handled these fields being NULL. Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2022-03-08KEYS: x509: remove never-set ->unsupported_key flagEric Biggers3-15/+2
The X.509 parser always sets cert->pub->pkey_algo on success, since x509_extract_key_data() is a mandatory action in the X.509 ASN.1 grammar, and it returns an error if the algorithm is unknown. Thus, remove the dead code which handled this field being NULL. This results in the ->unsupported_key flag never being set, so remove that too. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2022-03-08KEYS: x509: remove unused fieldsEric Biggers1-2/+0
Remove unused fields from struct x509_parse_context. Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2022-03-08KEYS: x509: clearly distinguish between key and signature algorithmsEric Biggers2-15/+19
An X.509 certificate has two, potentially different public key algorithms: the one used by the certificate's key, and the one that was used to sign the certificate. Some of the naming made it unclear which algorithm was meant. Rename things appropriately: - x509_note_pkey_algo() => x509_note_sig_algo() - algo_oid => sig_algo Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2022-03-07crypto: add rocksoft 64b crc guard tag frameworkKeith Busch5-0/+117
Hardware specific features may be able to calculate a crc64, so provide a framework for drivers to register their implementation. If nothing is registered, fallback to the generic table lookup implementation. The implementation is modeled after the crct10dif equivalent. Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20220303201312.3255347-7-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-03crypto: crypto_xor - use helpers for unaligned accessesArd Biesheuvel1-3/+21
Dereferencing a misaligned pointer is undefined behavior in C, and may result in codegen on architectures such as ARM that trigger alignments traps and expensive fixups in software. Instead, use the get_aligned()/put_aligned() accessors, which are cheap or even completely free when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y. In the converse case, the prior alignment checks ensure that the casts are safe, and so no unaligned accessors are necessary. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: cleanup commentsTom Rix6-10/+10
For spdx /* */ for *.h, // for *.c Space before spdx tag Replacements paramenters to parameters aymmetric to asymmetric sigature to signature boudary to boundary compliled to compiled eninges to engines explicity to explicitly Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: dh - calculate Q from P for the full public key verificationNicolai Stange1-11/+29
As the ->q in struct dh_ctx gets never set anywhere, the code in dh_is_pubkey_valid() for doing the full public key validation in accordance to SP800-56Arev3 is effectively dead. However, for safe-prime groups Q = (P - 1)/2 by definition and as the safe-prime groups are the only possible groups in FIPS mode (via those ffdheXYZ() templates), this enables dh_is_pubkey_valid() to calculate Q on the fly for these. Implement this. With this change, the last code accessing struct dh_ctx's ->q is now gone. Remove this member from struct dh_ctx. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: dh - disallow plain "dh" usage in FIPS modeNicolai Stange1-1/+0
SP800-56Arev3, sec. 5.5.2 ("Assurance of Domain-Parameter Validity") asserts that an implementation needs to verify domain paramtere validity, which boils down to either - the domain parameters corresponding to some known safe-prime group explicitly listed to be approved in the document or - for parameters conforming to a "FIPS 186-type parameter-size set", that the implementation needs to perform an explicit domain parameter verification, which would require access to the "seed" and "counter" values used in their generation. The latter is not easily feasible and moreover, SP800-56Arev3 states that safe-prime groups are preferred and that FIPS 186-type parameter sets should only be supported for backward compatibility, if it all. Mark "dh" as not fips_allowed in testmgr. Note that the safe-prime ffdheXYZ(dh) wrappers are not affected by this change: as these enforce some approved safe-prime group each, their usage is still allowed in FIPS mode. This change will effectively render the keyctl(KEYCTL_DH_COMPUTE) syscall unusable in FIPS mode, but it has been brought up that this might even be a good thing ([1]). [1] https://lore.kernel.org/r/20211217055227.GA20698@gondor.apana.org.au Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: api - allow algs only in specific constructions in FIPS modeNicolai Stange4-10/+54
Currently we do not distinguish between algorithms that fail on the self-test vs. those which are disabled in FIPS mode (not allowed). Both are marked as having failed the self-test. Recently the need arose to allow the usage of certain algorithms only as arguments to specific template instantiations in FIPS mode. For example, standalone "dh" must be blocked, but e.g. "ffdhe2048(dh)" is allowed. Other potential use cases include "cbcmac(aes)", which must only be used with ccm(), or "ghash", which must be used only for gcm(). This patch allows this scenario by adding a new flag FIPS_INTERNAL to indicate those algorithms that are not FIPS-allowed. They can then be used as template arguments only, i.e. when looked up via crypto_grab_spawn() to be more specific. The FIPS_INTERNAL bit gets propagated upwards recursively into the surrounding template instances, until the construction eventually matches an explicit testmgr entry with ->fips_allowed being set, if any. The behaviour to skip !->fips_allowed self-test executions in FIPS mode will be retained. Note that this effectively means that FIPS_INTERNAL algorithms are handled very similarly to the INTERNAL ones in this regard. It is expected that the FIPS_INTERNAL algorithms will receive sufficient testing when the larger constructions they're a part of, if any, get exercised by testmgr. Note that as a side-effect of this patch algorithms which are not FIPS-allowed will now return ENOENT instead of ELIBBAD. Hopefully this is not an issue as some people were relying on this already. Link: https://lore.kernel.org/r/YeEVSaMEVJb3cQkq@gondor.apana.org.au Originally-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: dh - allow for passing NULL to the ffdheXYZ(dh)s' ->set_secret()Nicolai Stange1-7/+8
Ephemeral key generation can be requested from any of the ffdheXYZ(dh) variants' common ->set_secret() by passing it an (encoded) struct dh with the key parameter being unset, i.e. with ->key_size == 0. As the whole purpose of the ffdheXYZ(dh) templates is to fill in the group parameters as appropriate, they expect ->p and ->g to be unset in any input struct dh as well. This means that a user would have to encode an all-zeroes struct dh instance via crypto_dh_encode_key() when requesting ephemeral key generation from a ffdheXYZ(dh) instance, which is kind of pointless. Make dh_safe_prime_set_secret() to decode a struct dh from the supplied buffer only if the latter is non-NULL and initialize it with all zeroes otherwise. That is, it is now possible to call crypto_kpp_set_secret(tfm, NULL, 0); on any ffdheXYZ(dh) tfm for requesting ephemeral key generation. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: testmgr - add keygen tests for ffdheXYZ(dh) templatesNicolai Stange1-0/+558
Now that the ffdheXYZ(dh) templates support ephemeral key generation, add ->keygen = 1 TVs for each of them to the testmgr.c. In order to facilitate string merging by the compiler, set party B's secret and public keys to the ones specified for party A in the respective existing known answer test. With GCC 7.5 on x86_64, this leads to an increase of testmgr.o size by less than half a kB. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: dh - implement private key generation primitive for ffdheXYZ(dh)Nicolai Stange2-3/+138
The support for NVME in-band authentication currently in the works ([1]) needs to generate ephemeral DH keys for use with the RFC 7919 safe-prime FFDHE groups. In analogy to ECDH and its ecc_gen_privkey(), implement a dh_safe_prime_gen_privkey() and invoke it from the ffdheXYZ(dh) templates' common ->set_secret(), i.e. dh_safe_prime_set_secret(), in case the input ->key_size is zero. As the RFC 7919 FFDHE groups are classified as approved safe-prime groups by SP800-56Arev3, it's worthwhile to make the new dh_safe_prime_gen_privkey() to follow the approach specified in SP800-56Arev3, sec. 5.6.1.1.3 ("Key-Pair Generation Using Extra Random Bits") in order to achieve conformance. SP800-56Arev3 specifies a lower as well as an upper bound on the generated key's length: - it must be >= two times the maximum supported security strength of the group in question and - it must be <= the length of the domain parameter Q. For any safe-prime group Q = (P - 1)/2 by definition and the individual maximum supported security strengths as specified by SP800-56Arev3 have been made available as part of the FFDHE dh_safe_prime definitions introduced with a previous patch. Make dh_safe_prime_gen_privkey() pick twice the maximum supported strength rounded up to the next power of two for the output key size. This choice respects both, the lower and upper bounds given by SP800-90Arev3 for any of the approved safe-prime groups and is also in line with the NVME base spec 2.0, which requires the key size to be >= 256bits. [1] https://lore.kernel.org/r/20211202152358.60116-1-hare@suse.de Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: testmgr - add known answer tests for ffdheXYZ(dh) templatesNicolai Stange2-0/+908
Add known answer tests for the ffdhe2048(dh), ffdhe3072(dh), ffdhe4096(dh), ffdhe6144(dh) and ffdhe8192(dh) templates introduced with the previous patch to the testmgr. All TVs have been generated with OpenSSL. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: dh - implement ffdheXYZ(dh) templatesNicolai Stange2-1/+303
Current work on NVME in-band authentication support ([1]) needs to invoke DH with the FFDHE safe-prime group parameters specified in RFC 7919. Introduce a new CRYPTO_DH_RFC7919_GROUPS Kconfig option. If enabled, make dh_generic register a couple of ffdheXYZ(dh) templates, one for each group: ffdhe2048(dh), ffdhe3072(dh), ffdhe4096(dh), ffdhe6144(dh) and ffdhe8192(dh). Their respective ->set_secret() expects a (serialized) struct dh, just like the underlying "dh" implementation does, but with the P and G values unset so that the safe-prime constants for the given group can be filled in by the wrapping template. Internally, a struct dh_safe_prime instance is being defined for each of the ffdheXYZ(dh) templates as appropriate. In order to prepare for future key generation, fill in the maximum security strength values as specified by SP800-56Arev3 on the go, even though they're not needed at this point yet. Implement the respective ffdheXYZ(dh) crypto_template's ->create() by simply forwarding any calls to the __dh_safe_prime_create() helper introduced with the previous commit, passing the associated dh_safe_prime in addition to the received ->create() arguments. [1] https://lore.kernel.org/r/20211202152358.60116-1-hare@suse.de Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: dh - introduce common code for built-in safe-prime group supportNicolai Stange1-0/+208
Recent work on NVME in-band authentication support ([1]) needs to invoke the "dh" KPP with the FFDHE safe-prime group parameters as specified in RFC 7919 and generate ephemeral keys suitable for the respective group. By coincidence, the requirements from NIST SP800-56Arev3, sec. 5.5.2 ("Assurance of Domain-Parameter Validity") basically boil down to disallowing any group parameters not among the approved safe-prime groups specified in either RFC 7919 or RFC 3526 in FIPS mode. Furthermore, SP800-56Arev3 specifies the respective security strength for each of the approved safe-prime groups, which has a direct impact on the minimum key lengths. In this light, it's desirable to introduce built-in support for the RFC 7919 safe-prime groups to the kernel's DH implementation, provide a SP800-56Arev3 conforming key generation primitive for those and render non-approved group parameters unusable in FIPS mode on the way. As suggested ([2]) in the course of discussion to previous iterations of this patchset, the built-in support for ffdhe groups would be best made available in the form of templates wrapping the existing "dh" implementation, one for each group specified by RFC 7919: ffdhe2048(dh), ffdhe3072(dh), ffdhe4096(dh), ffdhe6144(dh) and ffdhe8192(dh). As these templates differ only in the safe-prime constants they'd configure the inner "dh" transforms with, they can share almost all of their "dh"-wrapping template implementation code. Introduce this common code to dh_generic. The actual dump of the RFC 7919 safe-prime constants will be deferred to the next patch in order to facilitate review. The ephemeral key generation primitive mentioned above likewise deserves a patch on its own, as does the mechanism by which unapproved groups are rendered unusable in FIPS mode. Define a struct dh_safe_prime container for specifying the individual templates' associated safe-prime group constants. All ffdheXYZ(dh) template instances will store a pointer to such a dh_safe_prime in their context areas each. Implement the common __dh_safe_prime_create() template instantiation helper. The intention is that the individual ffdheXYZ(dh) crypto_templates' ->create() implementations will simply forward any calls to __dh_safe_prime_create(), passing a suitable dh_safe_prime in addition to the received ->create() arguments. __dh_safe_prime_create() would then create and register a kpp_instance as appropriate, storing the given dh_safe_prime pointer alongside a crypto_kpp_spawn for the inner "dh" kpp_alg in the context area. As the ffdheXYZ(dh) kpp_instances are supposed to act as proxies to the inner "dh" kpp_alg, make each of their associated crypto_kpp transforms to in turn own an inner "dh" transform, a pointer to which gets stored in the context area. Setup and teardown are getting handled from the outer ->init_tfm() and ->exit_tfm() respectively. In order to achieve the overall goal and let the ffdheXYZ(dh) kpp_instances configure the inner "dh" transforms with the respective group parameters, make their common ->set_secret(), the new dh_safe_prime_set_secret(), fill in the P and G values before forwarding the call to the inner "dh"'s ->set_secret(). Note that the outer ->set_secret() can obtain the P value associated with the given ffdheXYZ(dh) kpp_instance by means of the dh_safe_prime referenced from the latter's context. The value of G OTOH always equals constant 2 for the safe-prime groups. Finally, make the remaining two kpp_alg primitives both operating on kpp_requests, i.e. ->generate_public_key() and ->compute_shared_secret(), to merely forward any request to the inner "dh" implementation. However, a kpp_request instance received from the outside cannot get simply passed on as-is, because its associated transform (crypto_kpp_reqtfm()) will have been set to the outer ffdheXYZ(dh) one. In order to handle this, reserve some space in the outer ffdheXYZ(dh) kpp_requests' context areas for in turn storing an inner kpp_request suitable for "dh" each. Make the outer ->generate_public_key() and ->compute_shared_secret() respectively to setup this inner kpp_request by means of the new dh_safe_prime_prepare_dh_req() helper before handing it over to the "dh" implementation for further processing. dh_safe_prime_prepare_dh_req() basically copies the outer kpp_request received from the outside over to the inner one, but installs the inner transform and its own ->complete() proxy callback therein. This completion callback, the new dh_safe_prime_complete_req(), doesn't do anything beyond completing the outer request. Note that there exist some examples in crypto/, which would simply install the completion handler from the outer request at the inner one in similar setups, e.g. seqiv. However, this would mean that the user-provided completion handler won't get called with the address of the outer kpp_request initially submitted and the handler might not be prepared for this. Users could certainly work around this by setting the callback ->data properly, but IMO it's cleaner this way. Furthermore, it might make sense to extend dh_safe_prime_complete_req() in the future and move e.g. those post-computation FIPS checks from the generic "dh" implementation to the ffdheXYZ(dh) templates. [1] https://lore.kernel.org/r/20211202152358.60116-1-hare@suse.de [2] https://lore.kernel.org/r/20211217055227.GA20698@gondor.apana.org.au Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: dh - split out deserialization code from crypto_dh_decode()Nicolai Stange1-8/+19
A subsequent commit will introduce "dh" wrapping templates of the form "ffdhe2048(dh)", "ffdhe3072(dh)" and so on in order to provide built-in support for the well-known safe-prime ffdhe group parameters specified in RFC 7919. Those templates' ->set_secret() will wrap the inner "dh" implementation's ->set_secret() and set the ->p and ->g group parameters as appropriate on the way inwards. More specifically, - A ffdheXYZ(dh) user would call crypto_dh_encode() on a struct dh instance having ->p == ->g == NULL as well as ->p_size == ->g_size == 0 and pass the resulting buffer to the outer ->set_secret(). - This outer ->set_secret() would then decode the struct dh via crypto_dh_decode_key(), set ->p, ->g, ->p_size as well as ->g_size as appropriate for the group in question and encode the struct dh again before passing it further down to the inner "dh"'s ->set_secret(). The problem is that crypto_dh_decode_key() implements some basic checks which would reject parameter sets with ->p_size == 0 and thus, the ffdheXYZ templates' ->set_secret() cannot use it as-is for decoding the passed buffer. As the inner "dh"'s ->set_secret() will eventually conduct said checks on the final parameter set anyway, the outer ->set_secret() really only needs the decoding functionality. Split out the pure struct dh decoding part from crypto_dh_decode_key() into the new __crypto_dh_decode_key(). __crypto_dh_decode_key() gets defined in crypto/dh_helper.c, but will have to get called from crypto/dh.c and thus, its declaration must be somehow made available to the latter. Strictly speaking, __crypto_dh_decode_key() is internal to the dh_generic module, yet it would be a bit over the top to introduce a new header like e.g. include/crypto/internal/dh.h containing just a single prototype. Add the __crypto_dh_decode_key() declaration to include/crypto/dh.h instead. Provide a proper kernel-doc annotation, even though __crypto_dh_decode_key() is purposedly not on the function list specified in Documentation/crypto/api-kpp.rst. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: dh - remove struct dh's ->q memberNicolai Stange3-29/+10
The only current user of the DH KPP algorithm, the keyctl(KEYCTL_DH_COMPUTE) syscall, doesn't set the domain parameter ->q in struct dh. Remove it and any associated (de)serialization code in crypto_dh_encode_key() and crypto_dh_decode_key. Adjust the encoded ->secret values in testmgr's DH test vectors accordingly. Note that the dh-generic implementation would have initialized its struct dh_ctx's ->q from the decoded struct dh's ->q, if present. If this struct dh_ctx's ->q would ever have been non-NULL, it would have enabled a full key validation as specified in NIST SP800-56A in dh_is_pubkey_valid(). However, as outlined above, ->q is always NULL in practice and the full key validation code is effectively dead. A later patch will make dh_is_pubkey_valid() to calculate Q from P on the fly, if possible, so don't remove struct dh_ctx's ->q now, but leave it there until that has happened. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: kpp - provide support for KPP spawnsNicolai Stange1-0/+9
The upcoming support for the RFC 7919 ffdhe group parameters will be made available in the form of templates like "ffdhe2048(dh)", "ffdhe3072(dh)" and so on. Template instantiations thereof would wrap the inner "dh" kpp_alg and also provide kpp_alg services to the outside again. The primitves needed for providing kpp_alg services from template instances have been introduced with the previous patch. Continue this work now and implement everything needed for enabling template instances to make use of inner KPP algorithms like "dh". More specifically, define a struct crypto_kpp_spawn in close analogy to crypto_skcipher_spawn, crypto_shash_spawn and alike. Implement a crypto_grab_kpp() and crypto_drop_kpp() pair for binding such a spawn to some inner kpp_alg and for releasing it respectively. Template implementations can instantiate transforms from the underlying kpp_alg by means of the new crypto_spawn_kpp(). Finally, provide the crypto_spawn_kpp_alg() helper for accessing a spawn's underlying kpp_alg during template instantiation. Annotate everything with proper kernel-doc comments, even though include/crypto/internal/kpp.h is not considered for the generated docs. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: kpp - provide support for KPP template instancesNicolai Stange1-0/+20
The upcoming support for the RFC 7919 ffdhe group parameters will be made available in the form of templates like "ffdhe2048(dh)", "ffdhe3072(dh)" and so on. Template instantiations thereof would wrap the inner "dh" kpp_alg and also provide kpp_alg services to the outside again. Furthermore, it might be perhaps be desirable to provide KDF templates in the future, which would similarly wrap an inner kpp_alg and present themselves to the outside as another kpp_alg, transforming the shared secret on its way out. Introduce the bits needed for supporting KPP template instances. Everything related to inner kpp_alg spawns potentially being held by such template instances will be deferred to a subsequent patch in order to facilitate review. Define struct struct kpp_instance in close analogy to the already existing skcipher_instance, shash_instance and alike, but wrapping a struct kpp_alg. Implement the new kpp_register_instance() template instance registration primitive. Provide some helper functions for - going back and forth between a generic struct crypto_instance and the new struct kpp_instance, - obtaining the instantiating kpp_instance from a crypto_kpp transform and - for accessing a given kpp_instance's implementation specific context data. Annotate everything with proper kernel-doc comments, even though include/crypto/internal/kpp.h is not considered for the generated docs. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03crypto: engine - check if BH is disabled during completionCorentin Labbe1-0/+1
When doing iperf over ipsec with crypto hardware sun8i-ce, I hit some spinlock recursion bug. This is due to completion function called with enabled BH. Add check a to detect this. Fixes: 735d37b5424b ("crypto: engine - Introduce the block request crypto engine framework") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-02-18crypto: lrw - Add dependency on ecbHerbert Xu2-0/+2
The lrw template relies on ecb to work. So we need to declare a Kconfig dependency as well as a module softdep on it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-02-18crypto: xts - Add softdep on ecbHerbert Xu1-0/+1
The xts module needs ecb to be present as it's meant to work on top of ecb. This patch adds a softdep so ecb can be included automatically into the initramfs. Reported-by: rftc <rftc@gmx.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-02-15crypto: af_alg - get rid of alg_memory_allocatedEric Dumazet1-3/+0
alg_memory_allocated does not seem to be really used. alg_proto does have a .memory_allocated field, but no corresponding .sysctl_mem. This means sk_has_account() returns true, but all sk_prot_mem_limits() users will trigger a NULL dereference [1]. THis was not a problem until SO_RESERVE_MEM addition. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 3591 Comm: syz-executor153 Not tainted 5.17.0-rc3-syzkaller-00316-gb81b1829e7e3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:sk_prot_mem_limits include/net/sock.h:1523 [inline] RIP: 0010:sock_reserve_memory+0x1d7/0x330 net/core/sock.c:1000 Code: 08 00 74 08 48 89 ef e8 27 20 bb f9 4c 03 7c 24 10 48 8b 6d 00 48 83 c5 08 48 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 ef e8 fb 1f bb f9 48 8b 6d 00 4c 89 ff 48 RSP: 0018:ffffc90001f1fb68 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88814aabc000 RCX: dffffc0000000000 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff90e18120 RBP: 0000000000000008 R08: dffffc0000000000 R09: fffffbfff21c3025 R10: fffffbfff21c3025 R11: 0000000000000000 R12: ffffffff8d109840 R13: 0000000000001002 R14: 0000000000000001 R15: 0000000000000001 FS: 0000555556e08300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc74416f130 CR3: 0000000073d9e000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sock_setsockopt+0x14a9/0x3a30 net/core/sock.c:1446 __sys_setsockopt+0x5af/0x980 net/socket.c:2176 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xb1/0xc0 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc7440fddc9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe98f07968 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc7440fddc9 RDX: 0000000000000049 RSI: 0000000000000001 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000000000004 R09: 00007ffe98f07990 R10: 0000000020000000 R11: 0000000000000246 R12: 00007ffe98f0798c R13: 00007ffe98f079a0 R14: 00007ffe98f079e0 R15: 0000000000000000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:sk_prot_mem_limits include/net/sock.h:1523 [inline] RIP: 0010:sock_reserve_memory+0x1d7/0x330 net/core/sock.c:1000 Code: 08 00 74 08 48 89 ef e8 27 20 bb f9 4c 03 7c 24 10 48 8b 6d 00 48 83 c5 08 48 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 ef e8 fb 1f bb f9 48 8b 6d 00 4c 89 ff 48 RSP: 0018:ffffc90001f1fb68 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88814aabc000 RCX: dffffc0000000000 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff90e18120 RBP: 0000000000000008 R08: dffffc0000000000 R09: fffffbfff21c3025 R10: fffffbfff21c3025 R11: 0000000000000000 R12: ffffffff8d109840 R13: 0000000000001002 R14: 0000000000000001 R15: 0000000000000001 FS: 0000555556e08300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc74416f130 CR3: 0000000073d9e000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Fixes: 2bb2f5fb21b0 ("net: add new socket option SO_RESERVE_MEM") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-11crypto: hmac - disallow keys < 112 bits in FIPS modeStephan Müller2-0/+13
FIPS 140 requires a minimum security strength of 112 bits. This implies that the HMAC key must not be smaller than 112 in FIPS mode. This restriction implies that the test vectors for HMAC that have a key that is smaller than 112 bits must be disabled when FIPS support is compiled. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-02-11crypto: hmac - add fips_skip supportStephan Müller2-0/+5
By adding the support for the flag fips_skip, hash / HMAC test vectors may be marked to be not applicable in FIPS mode. Such vectors are silently skipped in FIPS mode. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-02-09Merge branch 'linus' of ↵Linus Torvalds2-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "Fix two regressions: - Potential boot failure due to missing cryptomgr on initramfs - Stack overflow in octeontx2" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Move cryptomgr soft dependency into algapi crypto: octeontx2 - Avoid stack variable overflow
2022-02-05crypto: tcrypt - remove all multibuffer ahash testsTianjia Zhang1-224/+0
The multibuffer algorithms was removed already in 2018, so it is necessary to clear the test code left by tcrypt. Suggested-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-02-05crypto: api - Move cryptomgr soft dependency into algapiHerbert Xu2-1/+1
The soft dependency on cryptomgr is only needed in algapi because if algapi isn't present then no algorithms can be loaded. This also fixes the case where api is built-in but algapi is built as a module as the soft dependency would otherwise get lost. Fixes: 8ab23d547f65 ("crypto: api - Add softdep on cryptomgr") Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-02-04lib/crypto: blake2s: avoid indirect calls to compression function for Clang CFIJason A. Donenfeld1-2/+2
blake2s_compress_generic is weakly aliased by blake2s_compress. The current harness for function selection uses a function pointer, which is ordinarily inlined and resolved at compile time. But when Clang's CFI is enabled, CFI still triggers when making an indirect call via a weak symbol. This seems like a bug in Clang's CFI, as though it's bucketing weak symbols and strong symbols differently. It also only seems to trigger when "full LTO" mode is used, rather than "thin LTO". [ 0.000000][ T0] Kernel panic - not syncing: CFI failure (target: blake2s_compress_generic+0x0/0x1444) [ 0.000000][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-mainline-06981-g076c855b846e #1 [ 0.000000][ T0] Hardware name: MT6873 (DT) [ 0.000000][ T0] Call trace: [ 0.000000][ T0] dump_backtrace+0xfc/0x1dc [ 0.000000][ T0] dump_stack_lvl+0xa8/0x11c [ 0.000000][ T0] panic+0x194/0x464 [ 0.000000][ T0] __cfi_check_fail+0x54/0x58 [ 0.000000][ T0] __cfi_slowpath_diag+0x354/0x4b0 [ 0.000000][ T0] blake2s_update+0x14c/0x178 [ 0.000000][ T0] _extract_entropy+0xf4/0x29c [ 0.000000][ T0] crng_initialize_primary+0x24/0x94 [ 0.000000][ T0] rand_initialize+0x2c/0x6c [ 0.000000][ T0] start_kernel+0x2f8/0x65c [ 0.000000][ T0] __primary_switched+0xc4/0x7be4 [ 0.000000][ T0] Rebooting in 5 seconds.. Nonetheless, the function pointer method isn't so terrific anyway, so this patch replaces it with a simple boolean, which also gets inlined away. This successfully works around the Clang bug. In general, I'm not too keen on all of the indirection involved here; it clearly does more harm than good. Hopefully the whole thing can get cleaned up down the road when lib/crypto is overhauled more comprehensively. But for now, we go with a simple bandaid. Fixes: 6048fdcc5f26 ("lib/crypto: blake2s: include as built-in") Link: https://github.com/ClangBuiltLinux/linux/issues/1567 Reported-by: Miles Chen <miles.chen@mediatek.com> Tested-by: Miles Chen <miles.chen@mediatek.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: John Stultz <john.stultz@linaro.org> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-01-31crypto: memneq - avoid implicit unaligned accessesArd Biesheuvel1-7/+15
The C standard does not support dereferencing pointers that are not aligned with respect to the pointed-to type, and doing so is technically undefined behavior, even if the underlying hardware supports it. This means that conditionally dereferencing such pointers based on whether CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y is not the right thing to do, and actually results in alignment faults on ARM, which are fixed up on a slow path. Instead, we should use the unaligned accessors in such cases: on architectures that don't care about alignment, they will result in identical codegen whereas, e.g., codegen on ARM will avoid doubleword loads and stores but use ordinary ones, which are able to tolerate misalignment. Link: https://lore.kernel.org/linux-crypto/CAHk-=wiKkdYLY0bv+nXrcJz3NH9mAqPAafX7PpW5EwVtxsEu7Q@mail.gmail.com/ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>