Age | Commit message (Collapse) | Author | Files | Lines |
|
Remove job_done thread and replace it with generic callback based
mechanism.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-6-jacek.lawrynowicz@linux.intel.com
|
|
Let's kickstart the v6.8 release cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Profiling freq is a debug firmware feature. It switches default clock
to higher resolution for fine-grained and more accurate firmware task
profiling. We already configure it during boot up of VPU4.
Add debugfs knob and helpers per HW generation that allow to change it.
For vpu37xx the implementation is empty as profiling frequency can only
be changed on VPU4 or newer.
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-2-stanislaw.gruszka@linux.intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.7-rc1:
drm-misc-next-2023-10-19 + following:
UAPI Changes:
Cross-subsystem Changes:
- Convert fbdev drivers to use fbdev i/o mem helpers.
Core Changes:
- Use cross-references for macros in docs.
- Make drm_client_buffer_addb use addfb2.
- Add NV20 and NV30 YUV formats.
- Documentation updates for create_dumb ioctl.
- CI fixes.
- Allow variable number of run-queues in scheduler.
Driver Changes:
- Rename drm/ast constants.
- Make ili9882t its own driver.
- Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu.
- Add planar formats to rockchip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d92fae8-9b1b-4165-9ca8-5fda11ee146b@linux.intel.com
|
|
Currently the VPU firmware prepares for D0i3 every time the VPU
is entering D0i2 Idle state. This is not optimal as we might not
enter D0i3 every time we enter D0i2 Idle and this preparation
is quite costly.
This optimization moves D0i3 preparation to a dedicated
message sent from the host driver only when the driver is about
to enter D0i3 - this reduces power consumption and latency for
certain workloads, for example audio workloads that submit
inference every 10 ms.
The VPU needs non zero time to enter IDLE state after responding to
D0i3 entry message. If the driver does not wait for the VPU to enter
IDLE state it could cause warm boot failures.
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-12-stanislaw.gruszka@linux.intel.com
|
|
The driver needs to capture the D0i3 entry timestamp to
calculate D0i3 residency time.
The D0i3 residency time and the VPU timestamp are passed
to the firmware at D0i3 exit (warm boot).
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-8-stanislaw.gruszka@linux.intel.com
|
|
Setting a non-zero work point resets the IP hence IP_RESET
trigger is redundant.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-5-stanislaw.gruszka@linux.intel.com
|
|
This is needed to add the msm pr which is based on a higher base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Initialize HW specific parameters only once. We do not have to do this
on every power_up (performed during initialization and on resume). Move
corresponding code to ->info_init()
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-6-stanislaw.gruszka@linux.intel.com
|
|
Avoid HW bug on some platforms where we enter D0i3 state
and CPU is in low power states (C8 or above).
Fixes: 852be13f3bd3 ("accel/ivpu: Add PM support")
Cc: stable@vger.kernel.org
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231003064213.1527327-1-stanislaw.gruszka@linux.intel.com
|
|
Move sequence of masking and unmasking global interrupts from buttress
interrupt handler to generic one that handles both VPUIP and BTRS
interrupts.
Unmasking global interrupts will re-trigger MSI for any pending interrupts.
Lack of this sequence can randomly cause to miss any VPUIP interrupt that
comes after reading VPU_40XX_HOST_SS_ICB_STATUS_0 and before clearing
all active interrupt sources.
Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-6-stanislaw.gruszka@linux.intel.com
|
|
Do not enable frequency change interrupt on 40xx as it might
lead to an interrupt storm in current design.
FREQ_CHANGE interrupt is triggered on D0I2 entry which will cause
KMD to check VPU interrupt sources by reading VPUIP registers.
Access to those registers will toggle necessary clocks and trigger
another FREQ_CHANGE interrupt possibly ending in an infinite loop.
FREQ_CHANGE interrupt has only debug purposes and can be permanently
disabled.
Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-5-stanislaw.gruszka@linux.intel.com
|
|
We need to wait for the CLOCK_RESOURCE_OWN_ACK bit to be set
after configuring the workpoint. This step ensures that the VPU
microcontroller clock is actively toggling and ready for operation.
Previously, we relied solely on the READY bit in the VPU_STATUS
register, which indicated the completion of the workpoint download.
However, this approach was insufficient, as the READY bit could be set
while the device was still running on a sideband clock until the PLL
locked. To guarantee that the PLL is locked and the device is running on
the main clock source, we now wait for the CLOCK_RESOURCE_OWN_ACK before
proceeding with the remainder of the power-up sequence.
Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-4-stanislaw.gruszka@linux.intel.com
|
|
Buttress spec requires that the interrupt status is cleared at
the source first (before clearing MTL_BUTTRESS_INTERRUPT_STAT),
that implies that we have to mask out the global interrupt while
handling buttress interrupts.
Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230822095238.3722815-1-stanislaw.gruszka@linux.intel.com
|
|
Use ivpu_dbg(MISC) to print information about workarounds.
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-6-stanislaw.gruszka@linux.intel.com
|
|
Configure autosuspend values per HW generation and per platform.
For non silicon platforms disable autosuspend for now, for silicon
reduce it to 10 ms.
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-2-stanislaw.gruszka@linux.intel.com
|
|
Add support VPU 4 - new generation of VPU IP with various
hardware design improvements. From driver point of view, it differs
in register set, initialization process and MMU memory ranges.
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Co-developed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-7-stanislaw.gruszka@linux.intel.com
|