summaryrefslogtreecommitdiff
path: root/drivers/acpi/arm64
AgeCommit message (Collapse)AuthorFilesLines
2023-12-13ACPI: arm64: export acpi_arch_thermal_cpufreq_pctg()Arnd Bergmann1-0/+2
The cpufreq code can be in a loadable module, so the architecture support for it has to be exported: ERROR: modpost: "acpi_arch_thermal_cpufreq_pctg" [drivers/acpi/processor.ko] undefined! Fixes: 310293a2b941 ("ACPI: processor: reduce CPUFREQ thermal reduction pctg for Tegra241") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-12-06ACPI: processor: reduce CPUFREQ thermal reduction pctg for Tegra241Srikar Srimath Tirumala2-0/+21
Current implementation of processor_thermal performs software throttling in fixed steps of "20%" which can be too coarse for some platforms. We observed some performance gain after reducing the throttle percentage. Change the CPUFREQ thermal reduction percentage and maximum thermal steps to be configurable. Also, update the default values of both for Nvidia Tegra241 (Grace) SoC. The thermal reduction percentage is reduced to "5%" and accordingly the maximum number of thermal steps are increased as they are derived from the reduction percentage. Signed-off-by: Srikar Srimath Tirumala <srikars@nvidia.com> Co-developed-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-10-17amba: bus: balance firmware node reference countingAndy Shevchenko1-1/+1
Currently the ACPI code doesn't bump the reference count of the firmware node, while OF counter part does. Not that it's a problem right now, since ACPI doesn't really use the reference counting for firmware nodes, it still makes sense to make code robust against any changes done there. For this, - switch ACPI case to use device_set_node() to be unified with OF - move reference counting to amba_device_add() - switch to use firmware nodes instead of OF ones In the result we will have reference counting done in the same module for all callers independently on the nature of firmware node behind. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231006145732.3419115-1-andriy.shevchenko@linux.intel.com Signed-off-by: Rob Herring <robh@kernel.org>
2023-09-01Merge tag 'char-misc-6.6-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem changes for 6.6-rc1. Stuff all over the place here, lots of driver updates and changes and new additions. Short summary is: - new IIO drivers and updates - Interconnect driver updates - fpga driver updates and additions - fsi driver updates - mei driver updates - coresight driver updates - nvmem driver updates - counter driver updates - lots of smaller misc and char driver updates and additions All of these have been in linux-next for a long time with no reported problems" * tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits) nvmem: core: Notify when a new layout is registered nvmem: core: Do not open-code existing functions nvmem: core: Return NULL when no nvmem layout is found nvmem: core: Create all cells before adding the nvmem device nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper nvmem: sec-qfprom: Add Qualcomm secure QFPROM support dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom dt-bindings: nvmem: Add compatible for QCM2290 nvmem: Kconfig: Fix typo "drive" -> "driver" nvmem: Explicitly include correct DT includes nvmem: add new NXP QorIQ eFuse driver dt-bindings: nvmem: Add t1023-sfp efuse support dt-bindings: nvmem: qfprom: Add compatible for MSM8226 nvmem: uniphier: Use devm_platform_get_and_ioremap_resource() nvmem: qfprom: do some cleanup nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource() nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource() nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource() nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource() nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource() ...
2023-08-29Merge tag 'acpi-6.6-rc1' of ↵Linus Torvalds4-0/+134
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These include new ACPICA material, a rework of the ACPI thermal driver, a switch-over of the ACPI processor driver to using _OSC instead of (long deprecated) _PDC for CPU initialization, a rework of firmware notifications handling in several drivers, fixes and cleanups for suspend-to-idle handling on AMD systems, ACPI backlight driver updates and more. Specifics: - Update the ACPICA code in the kernel to upstream revision 20230628 including the following changes: - Suppress a GCC 12 dangling-pointer warning (Philip Prindeville) - Reformat the ACPI_STATE_COMMON macro and its users (George Guo) - Replace the ternary operator with ACPI_MIN() (Jiangshan Yi) - Add support for _DSC as per ACPI 6.5 (Saket Dumbre) - Remove a duplicate macro from zephyr header (Najumon B.A) - Add data structures for GED and _EVT tracking (Jose Marinho) - Fix misspelled CDAT DSMAS define (Dave Jiang) - Simplify an error message in acpi_ds_result_push() (Christophe Jaillet) - Add a struct size macro related to SRAT (Dave Jiang) - Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar) - Add support for RISC-V external interrupt controllers in MADT (Sunil V L) - Add RHCT flags, CMO and MMU nodes (Sunil V L) - Change ACPICA version to 20230628 (Bob Moore) - Introduce new wrappers for ACPICA notify handler install/remove and convert multiple drivers to using their own Notify() handlers instead of the ACPI bus type .notify() slated for removal (Michal Wilczynski) - Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2 (Hans de Goede) - Put ACPI video and its child devices explicitly into D0 on boot to avoid platform firmware confusion (Kai-Heng Feng) - Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby) - Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao) - Convert ACPI CPU initialization to using _OSC instead of _PDC that has been depreceted since 2018 and dropped from the specification in ACPI 6.5 (Michal Wilczynski, Rafael Wysocki) - Drop non-functional nocrt parameter from ACPI thermal (Mario Limonciello) - Clean up the ACPI thermal driver, rework the handling of firmware notifications in it and make it provide a table of generic trip point structures to the core during initialization (Rafael Wysocki) - Defer enumeration of devices with _DEP pointing to IVSC (Wentong Wu) - Install SystemCMOS address space handler for ACPI000E (TAD) to meet platform firmware expectations on some platforms (Zhang Rui) - Fix finding the generic error data in the ACPi extlog driver for compatibility with old and new firmware interface versions (Xiaochun Lee) - Remove assorted unused declarations of functions (Yue Haibing) - Move AMBA bus scan handling into arm64 specific directory (Sudeep Holla) - Fix and clean up suspend-to-idle interface for AMD systems (Mario Limonciello, Andy Shevchenko) - Fix string truncation warning in pnpacpi_add_device() (Sunil V L)" * tag 'acpi-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (66 commits) ACPI: x86: s2idle: Add a function to get LPS0 constraint for a device ACPI: x86: s2idle: Add for_each_lpi_constraint() helper ACPI: x86: s2idle: Add more debugging for AMD constraints parsing ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects ACPI: x86: s2idle: Post-increment variables when getting constraints ACPI: Adjust #ifdef for *_lps0_dev use ACPI: TAD: Install SystemCMOS address space handler for ACPI000E ACPI: Remove assorted unused declarations of functions ACPI: extlog: Fix finding the generic error data for v3 structure PNP: ACPI: Fix string truncation warning ACPI: Remove unused extern declaration acpi_paddr_to_node() ACPI: video: Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2 ACPI: video: Put ACPI video and its child devices into D0 on boot ACPI: processor: LoongArch: Get physical ID from MADT ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device ACPI: thermal: Eliminate code duplication from acpi_thermal_notify() ACPI: thermal: Drop unnecessary thermal zone callbacks ACPI: thermal: Rework thermal_get_trend() ACPI: thermal: Use trip point table to register thermal zones ...
2023-08-29Merge tag 'arm64-upstream' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "I think we have a bit less than usual on the architecture side, but that's somewhat balanced out by a large crop of perf/PMU driver updates and extensions to our selftests. CPU features and system registers: - Advertise hinted conditional branch support (FEAT_HBC) to userspace - Avoid false positive "SANITY CHECK" warning when xCR registers differ outside of the length field Documentation: - Fix macro name typo in SME documentation Entry code: - Unmask exceptions earlier on the system call entry path Memory management: - Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect() and pte_modify() Perf and PMU drivers: - Initial support for Coresight TRBE devices on ACPI systems (the coresight driver changes will come later) - Fix hw_breakpoint single-stepping when called from bpf - Fixes for DDR PMU on i.MX8MP SoC - Add NUMA-awareness to Hisilicon PCIe PMU driver - Fix locking dependency issue in Arm DMC620 PMU driver - Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver - Add support for Arm CMN-700 r3 parts to the CMN PMU driver - Add support for recent Arm Cortex CPU PMUs - Update Hisilicon PMU maintainers Selftests: - Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES, SHA1, etc) - Fix SSVE test to leave streaming-mode after grabbing the signal context - Add new test for SVE vector-length changes with SME enabled Miscellaneous: - Allow compiler to warn on suspicious looking system register expressions - Work around SDEI firmware bug by aborting any running handlers on a kernel crash - Fix some harmless warnings when building with W=1 - Remove some unused function declarations - Other minor fixes and cleanup" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits) drivers/perf: hisi: Update HiSilicon PMU maintainers arm_pmu: acpi: Add a representative platform device for TRBE arm_pmu: acpi: Refactor arm_spe_acpi_register_device() kselftest/arm64: Fix hwcaps selftest build hw_breakpoint: fix single-stepping when using bpf_overflow_handler arm64/sysreg: refactor deprecated strncpy kselftest/arm64: add jscvt feature to hwcap test kselftest/arm64: add pmull feature to hwcap test kselftest/arm64: add AES feature check to hwcap test kselftest/arm64: add SHA1 and related features to hwcap test arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments kselftest/arm64: build BTI tests in output directory perf/imx_ddr: don't enable counter0 if none of 4 counters are used perf/imx_ddr: speed up overflow frequency of cycle drivers/perf: hisi: Schedule perf session according to locality kselftest/arm64: fix a memleak in zt_regs_run() perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency perf/smmuv3: Add MODULE_ALIAS for module auto loading perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09 kselftest/arm64: Size sycall-abi buffers for the actual maximum VL ...
2023-08-15perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09Yicong Yang1-1/+4
Some HiSilicon SMMU PMCG suffers the erratum 162001900 that the PMU disable control sometimes fail to disable the counters. This will lead to error or inaccurate data since before we enable the counters the counter's still counting for the event used in last perf session. This patch tries to fix this by hardening the global disable process. Before disable the PMU, writing an invalid event type (0xffff) to focibly stop the counters. Correspondingly restore each events on pmu::pmu_enable(). Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20230814124012.58013-1-yangyicong@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2023-08-01ACPI: Move AMBA bus scan handling into arm64 specific directorySudeep Holla4-0/+134
Commit fcea0ccf4fd7 ("ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init()") moved all of the ARM-specific initialization into acpi_arm_init(). However, acpi_amba.c being outside of drivers/acpi/arm64 got ignored and hence acpi_amba_init() was not moved into acpi_arm_init(). Move the AMBA platform bus support into arm64 specific folder and make acpi_amba_init() part of acpi_arm_init(). Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-28ACPI/IORT: Remove erroneous id_count check in iort_node_get_rmr_info()Guanghui Feng1-3/+0
According to the ARM IORT specifications DEN 0049 issue E, the "Number of IDs" field in the ID mapping format reports the number of IDs in the mapping range minus one. In iort_node_get_rmr_info(), we erroneously skip ID mappings whose "Number of IDs" equal to 0, resulting in valid mapping nodes with a single ID to map being skipped, which is wrong. Fix iort_node_get_rmr_info() by removing the bogus id_count check. Fixes: 491cf4a6735a ("ACPI/IORT: Add support to retrieve IORT RMR reserved regions") Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com> Cc: <stable@vger.kernel.org> # 6.0.x Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Tested-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/1689593625-45213-1-git-send-email-guanghuifeng@linux.alibaba.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-06-23Merge branches 'for-next/kpti', 'for-next/missing-proto-warn', ↵Catalin Marinas6-3/+23
'for-next/iss2-decode', 'for-next/kselftest', 'for-next/misc', 'for-next/feat_mops', 'for-next/module-alloc', 'for-next/sysreg', 'for-next/cpucap', 'for-next/acpi', 'for-next/kdump', 'for-next/acpi-doc', 'for-next/doc' and 'for-next/tpidr2-fix', remote-tracking branch 'arm64/for-next/perf' into for-next/core * arm64/for-next/perf: docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst docs: perf: Add new description for HiSilicon UC PMU drivers/perf: hisi: Add support for HiSilicon UC PMU driver drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE perf/arm-cmn: Add sysfs identifier perf/arm-cmn: Revamp model detection perf/arm_dmc620: Add cpumask dt-bindings: perf: fsl-imx-ddr: Add i.MX93 compatible drivers/perf: imx_ddr: Add support for NXP i.MX9 SoC DDRC PMU driver perf/arm_cspmu: Decouple APMT dependency perf/arm_cspmu: Clean up ACPI dependency ACPI/APMT: Don't register invalid resource perf/arm_cspmu: Fix event attribute type perf: arm_cspmu: Set irq affinitiy only if overflow interrupt is used drivers/perf: hisi: Don't migrate perf to the CPU going to teardown drivers/perf: apple_m1: Force 63bit counters for M2 CPUs perf/arm-cmn: Fix DTC reset perf: qcom_l2_pmu: Make l2_cache_pmu_probe_cluster() more robust perf/arm-cci: Slightly optimize cci_pmu_sync_counters() * for-next/kpti: : Simplify KPTI trampoline exit code arm64: entry: Simplify tramp_alias macro and tramp_exit routine arm64: entry: Preserve/restore X29 even for compat tasks * for-next/missing-proto-warn: : Address -Wmissing-prototype warnings arm64: add alt_cb_patch_nops prototype arm64: move early_brk64 prototype to header arm64: signal: include asm/exception.h arm64: kaslr: add kaslr_early_init() declaration arm64: flush: include linux/libnvdimm.h arm64: module-plts: inline linux/moduleloader.h arm64: hide unused is_valid_bugaddr() arm64: efi: add efi_handle_corrupted_x18 prototype arm64: cpuidle: fix #ifdef for acpi functions arm64: kvm: add prototypes for functions called in asm arm64: spectre: provide prototypes for internal functions arm64: move cpu_suspend_set_dbg_restorer() prototype to header arm64: avoid prototype warnings for syscalls arm64: add scs_patch_vmlinux prototype arm64: xor-neon: mark xor_arm64_neon_*() static * for-next/iss2-decode: : Add decode of ISS2 to data abort reports arm64/esr: Add decode of ISS2 to data abort reporting arm64/esr: Use GENMASK() for the ISS mask * for-next/kselftest: : Various arm64 kselftest improvements kselftest/arm64: Log signal code and address for unexpected signals kselftest/arm64: Add a smoke test for ptracing hardware break/watch points * for-next/misc: : Miscellaneous patches arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe arm64: hibernate: remove WARN_ON in save_processor_state arm64/fpsimd: Exit streaming mode when flushing tasks arm64: mm: fix VA-range sanity check arm64/mm: remove now-superfluous ISBs from TTBR writes arm64: consolidate rox page protection logic arm64: set __exception_irq_entry with __irq_entry as a default arm64: syscall: unmask DAIF for tracing status arm64: lockdep: enable checks for held locks when returning to userspace arm64/cpucaps: increase string width to properly format cpucaps.h arm64/cpufeature: Use helper for ECV CNTPOFF cpufeature * for-next/feat_mops: : Support for ARMv8.8 memcpy instructions in userspace kselftest/arm64: add MOPS to hwcap test arm64: mops: allow disabling MOPS from the kernel command line arm64: mops: detect and enable FEAT_MOPS arm64: mops: handle single stepping after MOPS exception arm64: mops: handle MOPS exceptions KVM: arm64: hide MOPS from guests arm64: mops: don't disable host MOPS instructions from EL2 arm64: mops: document boot requirements for MOPS KVM: arm64: switch HCRX_EL2 between host and guest arm64: cpufeature: detect FEAT_HCX KVM: arm64: initialize HCRX_EL2 * for-next/module-alloc: : Make the arm64 module allocation code more robust (clean-up, VA range expansion) arm64: module: rework module VA range selection arm64: module: mandate MODULE_PLTS arm64: module: move module randomization to module.c arm64: kaslr: split kaslr/module initialization arm64: kasan: remove !KASAN_VMALLOC remnants arm64: module: remove old !KASAN_VMALLOC logic * for-next/sysreg: (21 commits) : More sysreg conversions to automatic generation arm64/sysreg: Convert TRBIDR_EL1 register to automatic generation arm64/sysreg: Convert TRBTRG_EL1 register to automatic generation arm64/sysreg: Convert TRBMAR_EL1 register to automatic generation arm64/sysreg: Convert TRBSR_EL1 register to automatic generation arm64/sysreg: Convert TRBBASER_EL1 register to automatic generation arm64/sysreg: Convert TRBPTR_EL1 register to automatic generation arm64/sysreg: Convert TRBLIMITR_EL1 register to automatic generation arm64/sysreg: Rename TRBIDR_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBTRG_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBMAR_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBSR_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBBASER_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBPTR_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBLIMITR_EL1 fields per auto-gen tools format arm64/sysreg: Convert OSECCR_EL1 to automatic generation arm64/sysreg: Convert OSDTRTX_EL1 to automatic generation arm64/sysreg: Convert OSDTRRX_EL1 to automatic generation arm64/sysreg: Convert OSLAR_EL1 to automatic generation arm64/sysreg: Standardise naming of bitfield constants in OSL[AS]R_EL1 arm64/sysreg: Convert MDSCR_EL1 to automatic register generation ... * for-next/cpucap: : arm64 cpucap clean-up arm64: cpufeature: fold cpus_set_cap() into update_cpu_capabilities() arm64: cpufeature: use cpucap naming arm64: alternatives: use cpucap naming arm64: standardise cpucap bitmap names * for-next/acpi: : Various arm64-related ACPI patches ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init() * for-next/kdump: : Simplify the crashkernel reservation behaviour of crashkernel=X,high on arm64 arm64: add kdump.rst into index.rst Documentation: add kdump.rst to present crashkernel reservation on arm64 arm64: kdump: simplify the reservation behaviour of crashkernel=,high * for-next/acpi-doc: : Update ACPI documentation for Arm systems Documentation/arm64: Update ACPI tables from BBR Documentation/arm64: Update references in arm-acpi Documentation/arm64: Update ARM and arch reference * for-next/doc: : arm64 documentation updates Documentation/arm64: Add ptdump documentation * for-next/tpidr2-fix: : Fix the TPIDR2_EL0 register restoring on sigreturn kselftest/arm64: Add a test case for TPIDR2 restore arm64/signal: Restore TPIDR2 register rather than memory state
2023-06-09ACPI/APMT: Don't register invalid resourceRobin Murphy1-4/+6
Don't register a resource for the second page unless the dual-page extension flag is actually present to say it's valid. CC: Lorenzo Pieralisi <lpieralisi@kernel.org> CC: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Link: https://lore.kernel.org/r/63b34656e1f7b41bcb458fb6d7496e04db757e0d.1685983270.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2023-06-08ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init()Sudeep Holla6-3/+23
Move all of the ARM-specific initialization into one function namely acpi_arm_init(), so it is not necessary to modify/update bus.c every time a new piece of it is added. Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/CAJZ5v0iBZRZmV_oU+VurqxnVMbFN_ttqrL=cLh0sUH+=u0PYsw@mail.gmail.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Link: https://lore.kernel.org/r/20230606093531.2746732-1-sudeep.holla@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-04-17ACPI: AGDI: Improve error reporting for problems during .remove()Uwe Kleine-König1-3/+10
Returning an error value in a platform driver's remove callback results in a generic error message being emitted by the driver core, but otherwise it doesn't make a difference. The device goes away anyhow. So instead of triggering the generic platform error message, emit a more helpful message if a problem occurs and return 0 to suppress the generic message. This patch is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Link: https://lore.kernel.org/r/20221014160623.467195-1-u.kleine-koenig@pengutronix.de Signed-off-by: Will Deacon <will@kernel.org>
2022-11-15ACPI: APMT: Fix kerneldoc and indentationBesar Wicaksono1-2/+3
Add missing kerneldoc and fix alignment on one of the arguments of apmt_add_platform_device function. Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com> Link: https://lore.kernel.org/r/20221111234323.16182-1-bwicaksono@nvidia.com [will: Fixed up additional indentation issue] Signed-off-by: Will Deacon <will@kernel.org>
2022-11-07ACPI/IORT: Update SMMUv3 DeviceID supportRobin Murphy1-4/+12
IORT E.e now allows SMMUv3 nodes to describe the DeviceID for MSIs independently of wired GSIVs, where the previous oddly-restrictive definition meant that an SMMU without PRI support had to provide a DeviceID even if it didn't support MSIs either. Support this, with the usual temporary flag definition while the real one is making its way through ACPICA. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Link: https://lore.kernel.org/r/4b3e2ead4f392d1a47a7528da119d57918e5d806.1664392886.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-11-07ACPI: ARM Performance Monitoring Unit Table (APMT) initial supportBesar Wicaksono3-0/+181
ARM Performance Monitoring Unit Table describes the properties of PMU support in ARM-based system. The APMT table contains a list of nodes, each represents a PMU in the system that conforms to ARM CoreSight PMU architecture. The properties of each node include information required to access the PMU (e.g. MMIO base address, interrupt number) and also identification. For more detailed information, please refer to the specification below: * APMT: https://developer.arm.com/documentation/den0117/latest * ARM Coresight PMU: https://developer.arm.com/documentation/ihi0091/latest The initial support adds the detection of APMT table and generic infrastructure to create platform devices for ARM CoreSight PMUs. Similar to IORT the root pointer of APMT is preserved during runtime and each PMU platform device is given a pointer to the corresponding APMT node. Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20220929002834.32664-1-bwicaksono@nvidia.com Signed-off-by: Will Deacon <will@kernel.org>
2022-10-21iommu: Add gfp parameter to iommu_alloc_resv_regionLu Baolu1-1/+2
Add gfp parameter to iommu_alloc_resv_region() for the callers to specify the memory allocation behavior. Thus iommu_alloc_resv_region() could also be available in critical contexts. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20220927053109.4053662-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-09-24ACPI: scan: Support multiple DMA windows with different offsetsJianmin Lv1-11/+17
In DT systems configurations, of_dma_get_range() returns struct bus_dma_region DMA regions; they are used to set-up devices DMA windows with different offset available for translation between DMA address and CPU address. In ACPI systems configuration, acpi_dma_get_range() does not return DMA regions yet and that precludes setting up the dev->dma_range_map pointer and therefore DMA regions with multiple offsets. Update acpi_dma_get_range() to return struct bus_dma_region DMA regions like of_dma_get_range() does. After updating acpi_dma_get_range(), acpi_arch_dma_setup() is changed for ARM64, where the original dma_addr and size are removed as these arguments are now redundant, and pass 0 and U64_MAX for dma_base and size of arch_setup_dma_ops; this is a simplification consistent with what other ACPI architectures also pass to iommu_setup_dma_ops(). Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-29ACPI/IORT: Fix build error implicit-function-declarationRen Zhijie1-28/+28
If CONFIG_ACPI_IORT=y and CONFIG_IOMMU_API is not set, make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-, will be failed, like this: drivers/acpi/arm64/iort.c: In function ‘iort_get_rmr_sids’: drivers/acpi/arm64/iort.c:1406:2: error: implicit declaration of function ‘iort_iommu_rmr_get_resv_regions’; did you mean ‘iort_iommu_get_resv_regions’? [-Werror=implicit-function-declaration] iort_iommu_rmr_get_resv_regions(iommu_fwnode, NULL, head); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ iort_iommu_get_resv_regions cc1: some warnings being treated as errors make[3]: *** [drivers/acpi/arm64/iort.o] Error 1 The function iort_iommu_rmr_get_resv_regions() is declared under CONFIG_IOMMU_API, and the callers of iort_get_rmr_sids() and iort_put_rmr_sids() would select IOMMU_API. To fix this error, move the definitions to #ifdef CONFIG_IOMMU_API. Fixes: e302eea8f497 ("ACPI/IORT: Add a helper to retrieve RMR info directly") Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20220726033520.47865-1-renzhijie2@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-06ACPI/IORT: Add a helper to retrieve RMR info directlyShameer Kolothum1-0/+28
This will provide a way for SMMU drivers to retrieve StreamIDs associated with IORT RMR nodes and use that to set bypass settings for those IDs. Tested-by: Steven Price <steven.price@arm.com> Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20220615101044.1972-6-shameerali.kolothum.thodi@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-06ACPI/IORT: Add support to retrieve IORT RMR reserved regionsShameer Kolothum1-0/+291
Parse through the IORT RMR nodes and populate the reserve region list corresponding to a given IOMMU and device(optional). Also, go through the ID mappings of the RMR node and retrieve all the SIDs associated with it. Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Steven Price <steven.price@arm.com> Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20220615101044.1972-5-shameerali.kolothum.thodi@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-06ACPI/IORT: Provide a generic helper to retrieve reserve regionsShameer Kolothum1-7/+15
Currently IORT provides a helper to retrieve HW MSI reserve regions. Change this to a generic helper to retrieve any IORT related reserve regions. This will be useful when we add support for RMR nodes in subsequent patches. [Lorenzo: For ACPI IORT] Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Steven Price <steven.price@arm.com> Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20220615101044.1972-4-shameerali.kolothum.thodi@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-06ACPI/IORT: Make iort_iommu_msi_get_resv_regions() return voidShameer Kolothum1-16/+9
At present iort_iommu_msi_get_resv_regions() returns the number of MSI reserved regions on success and there are no users for this. The reserved region list will get populated anyway for platforms that require the HW MSI region reservation. Hence, change the function to return void instead. Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Steven Price <steven.price@arm.com> Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20220615101044.1972-3-shameerali.kolothum.thodi@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-06ACPI: AGDI: Fix missing prototype warning for acpi_agdi_init()Ilkka Koskinen1-0/+1
When building with W=1, we get the following warning: drivers/acpi/arm64/agdi.c:88:13: warning: no previous prototype for ‘acpi_agdi_init’ [-Wmissing-prototypes] void __init acpi_agdi_init(void) Include AGDI driver's header file to pull in the prototype definition for acpi_agdi_init() to get rid of the compiler warning Fixes: a2a591fb76e6 ("ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-10ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset deviceIlkka Koskinen3-0/+127
ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to issue diagnostic dump and reset via an SDEI event or an interrupt. This patch implements SDEI path. [0] https://developer.arm.com/documentation/den0093/latest/ Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-09ACPI/IORT: Check node revision for PMCG resourcesRobin Murphy1-3/+11
The original version of the IORT PMCG definition had an oversight wherein there was no way to describe the second register page for an implementation using the recommended RELOC_CTRS feature. Although the spec was fixed, and the final patches merged to ACPICA and Linux written against the new version, it seems that some old firmware based on the original revision has survived and turned up in the wild. Add a check for the original PMCG definition, and avoid filling in the second memory resource with nonsense if so. Otherwise it is likely that something horrible will happen when the PMCG driver attempts to probe. Reported-by: Michael Petlan <mpetlan@redhat.com> Fixes: 24e516049360 ("ACPI/IORT: Add support for PMCG") Cc: <stable@vger.kernel.org> # 5.2.x Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/75628ae41c257fb73588f7bf1c4459160e04be2b.1643916258.git.robin.murphy@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-10-12acpi/arm64: fix next_platform_timer() section mismatch errorJackie Liu1-1/+1
Fix modpost Section mismatch error in next_platform_timer(). [...] WARNING: modpost: vmlinux.o(.text.unlikely+0x26e60): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc The function next_platform_timer() references the variable __initdata acpi_gtdt_desc. This is often because next_platform_timer lacks a __initdata annotation or the annotation of acpi_gtdt_desc is wrong. WARNING: modpost: vmlinux.o(.text.unlikely+0x26e64): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc The function next_platform_timer() references the variable __initdata acpi_gtdt_desc. This is often because next_platform_timer lacks a __initdata annotation or the annotation of acpi_gtdt_desc is wrong. ERROR: modpost: Section mismatches detected. Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them. make[1]: *** [scripts/Makefile.modpost:59: vmlinux.symvers] Error 1 make[1]: *** Deleting file 'vmlinux.symvers' make: *** [Makefile:1176: vmlinux] Error 2 [...] Fixes: a712c3ed9b8a ("acpi/arm64: Add memory-mapped timer support in GTDT driver") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Acked-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20210823092526.2407526-1-liu.yun@linux.dev Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-07-02Merge tag 'iommu-updates-v5.14' of ↵Linus Torvalds3-113/+70
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - SMMU Updates from Will Deacon: - SMMUv3: - Support stalling faults for platform devices - Decrease defaults sizes for the event and PRI queues - SMMUv2: - Support for a new '->probe_finalize' hook, needed by Nvidia - Even more Qualcomm compatible strings - Avoid Adreno TTBR1 quirk for DB820C platform - Intel VT-d updates from Lu Baolu: - Convert Intel IOMMU to use sva_lib helpers in iommu core - ftrace and debugfs supports for page fault handling - Support asynchronous nested capabilities - Various misc cleanups - Support for new VIOT ACPI table to make the VirtIO IOMMU available on x86 - Add the amd_iommu=force_enable command line option to enable the IOMMU on platforms where they are known to cause problems - Support for version 2 of the Rockchip IOMMU - Various smaller fixes, cleanups and refactorings * tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits) iommu/virtio: Enable x86 support iommu/dma: Pass address limit rather than size to iommu_setup_dma_ops() ACPI: Add driver for the VIOT table ACPI: Move IOMMU setup code out of IORT ACPI: arm64: Move DMA setup operations out of IORT iommu/vt-d: Fix dereference of pointer info before it is null checked iommu: Update "iommu.strict" documentation iommu/arm-smmu: Check smmu->impl pointer before dereferencing iommu/arm-smmu-v3: Remove unnecessary oom message iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails iommu/vt-d: Fix linker error on 32-bit iommu/vt-d: No need to typecast iommu/vt-d: Define counter explicitly as unsigned int iommu/vt-d: Remove unnecessary braces iommu/vt-d: Removed unused iommu_count in dmar domain iommu/vt-d: Use bitfields for DMAR capabilities iommu/vt-d: Use DEVICE_ATTR_RO macro iommu/vt-d: Fix out-bounds-warning in intel/svm.c iommu/vt-d: Add PRQ handling latency sampling ...
2021-06-25Merge branches 'iommu/fixes', 'arm/rockchip', 'arm/smmu', 'x86/vt-d', ↵Joerg Roedel3-113/+70
'x86/amd', 'virtio' and 'core' into next
2021-06-25ACPI: Move IOMMU setup code out of IORTJean-Philippe Brucker1-66/+8
Extract the code that sets up the IOMMU infrastructure from IORT, since it can be reused by VIOT. Move it one level up into a new acpi_iommu_configure_id() function, which calls the IORT parsing function which in turn calls the acpi_iommu_fwspec_init() helper. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20210618152059.1194210-3-jean-philippe@linaro.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-06-25ACPI: arm64: Move DMA setup operations out of IORTJean-Philippe Brucker3-46/+59
Extract generic DMA setup code out of IORT, so it can be reused by VIOT. Keep it in drivers/acpi/arm64 for now, since it could break x86 platforms that haven't run this code so far, if they have invalid tables. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20210618152059.1194210-2-jean-philippe@linaro.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-06-08ACPI/IORT: Enable stall support for platform devicesJean-Philippe Brucker1-1/+3
Copy the "Stall supported" bit, that tells whether a named component supports stall, into the dma-can-stall device property. Acked-by: Hanjun Guo <guohanjun@huawei.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Link: https://lore.kernel.org/r/20210526161927.24268-3-jean-philippe@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2021-05-17ACPI: IORT: Handle device properties with software node APIHeikki Krogerus1-1/+1
The older device property API is going to be removed. Replacing the device_add_properties() call with software node API equivalent device_create_managed_software_node(). Fixes: 434b73e61cc6 ("iommu/arm-smmu-v3: Use device properties for pasid-num-bits") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-05-07Merge tag 'arm64-fixes' of ↵Linus Torvalds1-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull more arm64 updates from Catalin Marinas: "A mix of fixes and clean-ups that turned up too late for the first pull request: - Restore terminal stack frame records. Their previous removal caused traces which cross secondary_start_kernel to terminate one entry too late, with a spurious "0" entry. - Fix boot warning with pseudo-NMI due to the way we manipulate the PMR register. - ACPI fixes: avoid corruption of interrupt mappings on watchdog probe failure (GTDT), prevent unregistering of GIC SGIs. - Force SPARSEMEM_VMEMMAP as the only memory model, it saves with having to test all the other combinations. - Documentation fixes and updates: tagged address ABI exceptions on brk/mmap/mremap(), event stream frequency, update booting requirements on the configuration of traps" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kernel: Update the stale comment arm64: Fix the documented event stream frequency arm64: entry: always set GIC_PRIO_PSR_I_SET during entry arm64: Explicitly document boot requirements for SVE arm64: Explicitly require that FPSIMD instructions do not trap arm64: Relax booting requirements for configuration of traps arm64: cpufeatures: use min and max arm64: stacktrace: restore terminal records arm64/vdso: Discard .note.gnu.property sections in vDSO arm64: doc: Add brk/mmap/mremap() to the Tagged Address ABI Exceptions psci: Remove unneeded semicolon ACPI: irq: Prevent unregistering of GIC SGIs ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure arm64: Show three registers per line arm64: remove HAVE_DEBUG_BUGVERBOSE arm64: alternative: simplify passing alt_region arm64: Force SPARSEMEM_VMEMMAP as the only memory management model arm64: vdso32: drop -no-integrated-as flag
2021-04-23ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failureMarc Zyngier1-4/+6
When failing the driver probe because of invalid firmware properties, the GTDT driver unmaps the interrupt that it mapped earlier. However, it never checks whether the mapping of the interrupt actially succeeded. Even more, should the firmware report an illegal interrupt number that overlaps with the GIC SGI range, this can result in an IPI being unmapped, and subsequent fireworks (as reported by Dann Frazier). Rework the driver to have a slightly saner behaviour and actually check whether the interrupt has been mapped before unmapping things. Reported-by: dann frazier <dann.frazier@canonical.com> Fixes: ca9ae5ec4ef0 ("acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver") Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/YH87dtTfwYgavusz@xps13.dannf Cc: <stable@vger.kernel.org> Cc: Fu Wei <wefu@redhat.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: dann frazier <dann.frazier@canonical.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20210421164317.1718831-2-maz@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-07iommu/arm-smmu-v3: Use device properties for pasid-num-bitsJean-Philippe Brucker1-6/+7
The pasid-num-bits property shouldn't need a dedicated fwspec field, it's a job for device properties. Add properties for IORT, and access the number of PASID bits using device_property_read_u32(). Suggested-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Acked-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20210401154718.307519-3-jean-philippe@linaro.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-01-27ACPI/IORT: Do not blindly trust DMA masks from firmwareMoritz Fischer1-2/+12
Address issue observed on real world system with suboptimal IORT table where DMA masks of PCI devices would get set to 0 as result. iort_dma_setup() would query the root complex'/named component IORT entry for a DMA mask, and use that over the one the device has been configured with earlier. Ideally we want to use the minimum mask of what the IORT contains for the root complex and what the device was configured with. Fixes: 5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes") Signed-off-by: Moritz Fischer <mdf@kernel.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20210122012419.95010-1-mdf@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-12-09Merge remote-tracking branch 'arm64/for-next/fixes' into for-next/coreCatalin Marinas1-3/+5
* arm64/for-next/fixes: (26 commits) arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE arm64: mte: Fix typo in macro definition arm64: entry: fix EL1 debug transitions arm64: entry: fix NMI {user, kernel}->kernel transitions arm64: entry: fix non-NMI kernel<->kernel transitions arm64: ptrace: prepare for EL1 irq/rcu tracking arm64: entry: fix non-NMI user<->kernel transitions arm64: entry: move el1 irq/nmi logic to C arm64: entry: prepare ret_to_user for function call arm64: entry: move enter_from_user_mode to entry-common.c arm64: entry: mark entry code as noinstr arm64: mark idle code as noinstr arm64: syscall: exit userspace before unmasking exceptions arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect() arm64: pgtable: Fix pte_accessible() ACPI/IORT: Fix doc warnings in iort.c arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build arm64: cpu_errata: Apply Erratum 845719 to KRYO2XX Silver arm64: proton-pack: Add KRYO2XX silver CPUs to spectre-v2 safe-list arm64: kpti: Add KRYO2XX gold/silver CPU cores to kpti safelist ... # Conflicts: # arch/arm64/include/asm/exception.h # arch/arm64/kernel/sdei.c
2020-11-23ACPI/IORT: Fix doc warnings in iort.cShiju Jose1-3/+5
Fix following warnings caused by mismatch between function parameters and function comments. drivers/acpi/arm64/iort.c:55: warning: Function parameter or member 'iort_node' not described in 'iort_set_fwnode' drivers/acpi/arm64/iort.c:55: warning: Excess function parameter 'node' description in 'iort_set_fwnode' drivers/acpi/arm64/iort.c:682: warning: Function parameter or member 'id' not described in 'iort_get_device_domain' drivers/acpi/arm64/iort.c:682: warning: Function parameter or member 'bus_token' not described in 'iort_get_device_domain' drivers/acpi/arm64/iort.c:682: warning: Excess function parameter 'req_id' description in 'iort_get_device_domain' drivers/acpi/arm64/iort.c:1142: warning: Function parameter or member 'dma_size' not described in 'iort_dma_setup' drivers/acpi/arm64/iort.c:1142: warning: Excess function parameter 'size' description in 'iort_dma_setup' drivers/acpi/arm64/iort.c:1534: warning: Function parameter or member 'ops' not described in 'iort_add_platform_device' Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20201014093139.1580-1-shiju.jose@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-20arm64: mm: Set ZONE_DMA size based on early IORT scanArd Biesheuvel1-0/+55
We recently introduced a 1 GB sized ZONE_DMA to cater for platforms incorporating masters that can address less than 32 bits of DMA, in particular the Raspberry Pi 4, which has 4 or 8 GB of DRAM, but has peripherals that can only address up to 1 GB (and its PCIe host bridge can only access the bottom 3 GB) Instructing the DMA layer about these limitations is straight-forward, even though we had to fix some issues regarding memory limits set in the IORT for named components, and regarding the handling of ACPI _DMA methods. However, the DMA layer also needs to be able to allocate memory that is guaranteed to meet those DMA constraints, for bounce buffering as well as allocating the backing for consistent mappings. This is why the 1 GB ZONE_DMA was introduced recently. Unfortunately, it turns out the having a 1 GB ZONE_DMA as well as a ZONE_DMA32 causes problems with kdump, and potentially in other places where allocations cannot cross zone boundaries. Therefore, we should avoid having two separate DMA zones when possible. So let's do an early scan of the IORT, and only create the ZONE_DMA if we encounter any devices that need it. This puts the burden on the firmware to describe such limitations in the IORT, which may be redundant (and less precise) if _DMA methods are also being provided. However, it should be noted that this situation is highly unusual for arm64 ACPI machines. Also, the DMA subsystem still gives precedence to the _DMA method if implemented, and so we will not lose the ability to perform streaming DMA outside the ZONE_DMA if the _DMA method permits it. [nsaenz: unified implementation with DT's counterpart] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Cc: Jeremy Linton <jeremy.linton@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20201119175400.9995-7-nsaenzjulienne@suse.de Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-10-16Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-2/+4
Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...
2020-10-14Merge tag 'acpi-5.10-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it, clean up some non-ACPICA code referring to debug facilities from ACPICA, reduce the overhead related to accessing GPE registers, add a new DPTF (Dynamic Power and Thermal Framework) participant driver, update the ACPICA code in the kernel to upstream revision 20200925, add a new ACPI backlight whitelist entry, fix a few assorted issues and clean up some code. Specifics: - Add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it (Jonathan Cameron) - Clean up some non-ACPICA code referring to debug facilities from ACPICA that are not actually used in there (Hanjun Guo) - Add new DPTF driver for the PCH FIVR participant (Srinivas Pandruvada) - Reduce overhead related to accessing GPE registers in ACPICA and the OS interface layer and make it possible to access GPE registers using logical addresses if they are memory-mapped (Rafael Wysocki) - Update the ACPICA code in the kernel to upstream revision 20200925 including changes as follows: + Add predefined names from the SMBus sepcification (Bob Moore) + Update acpi_help UUID list (Bob Moore) + Return exceptions for string-to-integer conversions in iASL (Bob Moore) + Add a new "ALL <NameSeg>" debugger command (Bob Moore) + Add support for 64 bit risc-v compilation (Colin Ian King) + Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap) - Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex Hung) - Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko) - Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo) - Add missing config_item_put() to fix refcount leak (Hanjun Guo) - Drop lefrover field from struct acpi_memory_device (Hanjun Guo) - Make the ACPI extlog driver check for RDMSR failures (Ben Hutchings) - Fix handling of lid state changes in the ACPI button driver when input device is closed (Dmitry Torokhov) - Fix several assorted build issues (Barnabás Pőcze, John Garry, Nathan Chancellor, Tian Tao) - Drop unused inline functions and reduce code duplication by using kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing) - Serialize tools/power/acpi Makefile (Thomas Renninger)" * tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPICA: Update version to 20200925 Version 20200925 ACPICA: Remove unnecessary semicolon ACPICA: Debugger: Add a new command: "ALL <NameSeg>" ACPICA: iASL: Return exceptions for string-to-integer conversions ACPICA: acpi_help: Update UUID list ACPICA: Add predefined names found in the SMBus sepcification ACPICA: Tree-wide: fix various typos and spelling mistakes ACPICA: Drop the repeated word "an" in a comment ACPICA: Add support for 64 bit risc-v compilation ACPI: button: fix handling lid state changes when input device closed tools/power/acpi: Serialize Makefile ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug() ACPI: memhotplug: Remove 'state' from struct acpi_memory_device ACPI / extlog: Check for RDMSR failure ACPI: Make acpi_evaluate_dsm() prototype consistent docs: mm: numaperf.rst Add brief description for access class 1. node: Add access1 class to represent CPU to memory characteristics ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 ACPI: Let ACPI know we support Generic Initiator Affinity Structures x86: Support Generic Initiator only proximity domains ...
2020-10-06dma-mapping: split <linux/dma-mapping.h>Christoph Hellwig1-1/+1
Split out all the bits that are purely for dma_map_ops implementations and related code into a new <linux/dma-map-ops.h> header so that they don't get pulled into all the drivers. That also means the architecture specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h> any more, which leads to a missing includes that were pulled in by the x86 or arm versions in a few not overly portable drivers. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-24ACPI: Do not create new NUMA domains from ACPI static tables that are not SRATJonathan Cameron1-1/+1
Several ACPI static tables contain references to proximity domains. ACPI 6.3 has clarified that only entries in SRAT may define a new domain (sec 5.2.16). Those tables described in the ACPI spec have additional clarifying text. NFIT: Table 5-132, "Integer that represents the proximity domain to which the memory belongs. This number must match with corresponding entry in the SRAT table." HMAT: Table 5-145, "... This number must match with the corresponding entry in the SRAT table's processor affinity structure ... if the initiator is a processor, or the Generic Initiator Affinity Structure if the initiator is a generic initiator". IORT and DMAR are defined by external specifications. Intel Virtualization Technology for Directed I/O Rev 3.1 does not make any explicit statements, but the general SRAT statement above will still apply. https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf IO Remapping Table, Platform Design Document rev D, also makes not explicit statement, but refers to ACPI SRAT table for more information and again the generic SRAT statement above applies. https://developer.arm.com/documentation/den0049/d/ In conclusion, any proximity domain specified in these tables, should be a reference to a proximity domain also found in SRAT, and they should not be able to instantiate a new domain. Hence we switch to pxm_to_node() which will only return existing nodes. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Barry Song <song.bao.hua@hisilicon.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-17dma-mapping: introduce DMA range map, supplanting dma_pfn_offsetJim Quinlan1-2/+4
The new field 'dma_range_map' in struct device is used to facilitate the use of single or multiple offsets between mapping regions of cpu addrs and dma addrs. It subsumes the role of "dev->dma_pfn_offset" which was only capable of holding a single uniform offset and had no region bounds checking. The function of_dma_get_range() has been modified so that it takes a single argument -- the device node -- and returns a map, NULL, or an error code. The map is an array that holds the information regarding the DMA regions. Each range entry contains the address offset, the cpu_start address, the dma_start address, and the size of the region. of_dma_configure() is the typical manner to set range offsets but there are a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel driver code. These cases now invoke the function dma_direct_set_offset(dev, cpu_addr, dma_addr, size). Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> [hch: various interface cleanups] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Nathan Chancellor <natechancellor@gmail.com>
2020-09-07ACPI/IORT: Remove the unused inline functionsZenghui Yu1-4/+0
Since commit 8212688600ed ("ACPI/IORT: Fix build error when IOMMU_SUPPORT is disabled"), iort_fwspec_iommu_ops() and iort_add_device_replay() are not needed anymore when CONFIG_IOMMU_API is not selected. Let's remove them. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20200818063625.980-3-yuzenghui@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-09-07ACPI/IORT: Drop the unused @ops of iort_add_device_replay()Zenghui Yu1-5/+3
Since commit d2e1a003af56 ("ACPI/IORT: Don't call iommu_ops->add_device directly"), we use the IOMMU core API to replace a direct invoke of the specified callback. The parameter @ops has therefore became unused. Let's drop it. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20200818063625.980-2-yuzenghui@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-28ACPI/IORT: Add an input ID to acpi_dma_configure()Lorenzo Pieralisi1-15/+44
Some HW devices are created as child devices of proprietary busses, that have a bus specific policy defining how the child devices wires representing the devices ID are translated into IOMMU and IRQ controllers device IDs. Current IORT code provides translations for: - PCI devices, where the device ID is well identified at bus level as the requester ID (RID) - Platform devices that are endpoint devices where the device ID is retrieved from the ACPI object IORT mappings (Named components single mappings). A platform device is represented in IORT as a named component node For devices that are child devices of proprietary busses the IORT firmware represents the bus node as a named component node in IORT and it is up to that named component node to define in/out bus specific ID translations for the bus child devices that are allocated and created in a bus specific manner. In order to make IORT ID translations available for proprietary bus child devices, the current ACPI (and IORT) code must be augmented to provide an additional ID parameter to acpi_dma_configure() representing the child devices input ID. This ID is bus specific and it is retrieved in bus specific code. By adding an ID parameter to acpi_dma_configure(), the IORT code can map the child device ID to an IOMMU stream ID through the IORT named component representing the bus in/out ID mappings. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-6-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28ACPI/IORT: Remove useless PCI bus walkLorenzo Pieralisi1-3/+0
The PCI bus domain number (used in the iort_match_node_callback() - pci_domain_nr() call) is cascaded through the PCI bus hierarchy at PCI bus enumeration time, therefore there is no need in iort_find_dev_node() to walk the PCI bus upwards to grab the root bus to be passed to iort_scan_node(), the device->bus PCI bus pointer will do. Remove this useless code. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-5-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28ACPI/IORT: Make iort_msi_map_rid() PCI agnosticLorenzo Pieralisi1-6/+6
There is nothing PCI specific in iort_msi_map_rid(). Rename the function using a bus protocol agnostic name, iort_msi_map_id(), and convert current callers to it. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-4-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-05 19:38:06 +0300