summaryrefslogtreecommitdiff
path: root/drivers/acpi/ec.c
AgeCommit message (Collapse)AuthorFilesLines
2018-02-12ACPI / EC: Restore polling during noirq suspend/resume phasesRafael J. Wysocki1-0/+6
Commit 662591461c4b (ACPI / EC: Drop EC noirq hooks to fix a regression) modified the ACPI EC driver so that it doesn't switch over to busy polling mode during noirq stages of system suspend and resume in an attempt to fix an issue resulting from that behavior. However, that modification introduced a system resume regression on Thinkpad X240, so make the EC driver switch over to the polling mode during noirq stages of system suspend and resume again, which effectively reverts the problematic commit. Fixes: 662591461c4b (ACPI / EC: Drop EC noirq hooks to fix a regression) Link: https://bugzilla.kernel.org/show_bug.cgi?id=197863 Reported-by: Markus Demleitner <m@tfiu.de> Tested-by: Markus Demleitner <m@tfiu.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-04ACPI: EC: Fix debugfs_create_*() usageGeert Uytterhoeven1-1/+1
acpi_ec.gpe is "unsigned long", hence treating it as "u32" would expose the wrong half on big-endian 64-bit systems. Fix this by changing its type to "u32" and removing the cast, as all other code already uses u32 or sometimes even only u8. Fixes: 1195a098168fcacf (ACPI: Provide /sys/kernel/debug/ec/...) Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-30Merge branch 'acpi-ec' into acpiRafael J. Wysocki1-24/+45
* acpi-ec: ACPI / EC: Fix regression related to PM ops support in ECDT device
2017-11-21ACPI / EC: Fix regression related to PM ops support in ECDT deviceLv Zheng1-24/+45
On platforms (ASUS X550ZE and possibly all ASUS X series) with valid ECDT EC but invalid DSDT EC, EC PM ops won't be invoked as ECDT EC is not an ACPI device. Thus the following commit actually removed post-resume acpi_ec_enable_event() invocation for such platforms, and triggered a regression on them that after being resumed, EC (actually should be ECDT) driver stops handling EC events: Commit: c2b46d679b30c5c0d7eb47a21085943242bdd8dc Subject: ACPI / EC: Add PM operations to improve event handling for resume process Notice that the root cause actually is "ECDT is not an ACPI device" rather than "the timing of acpi_ec_enable_event() invocation", this patch fixes this issue by enumerating ECDT EC as an ACPI device. Due to the existence of the noirq stage, the ability of tuning the timing of acpi_ec_enable_event() invocation is still meaningful. This patch is a little bit different from the posted fix by moving acpi_config_boot_ec() from acpi_ec_ecdt_start() to acpi_ec_add() to make sure that EC event handling won't be stopped as long as the ACPI EC driver is bound. Thus the following sequence shouldn't disable EC event handling: unbind,suspend,resume,bind. Fixes: c2b46d679b30 (ACPI / EC: Add PM operations to improve event handling for resume process) Link: https://bugzilla.kernel.org/show_bug.cgi?id=196847 Reported-by: Luya Tshimbalanga <luya@fedoraproject.org> Tested-by: Luya Tshimbalanga <luya@fedoraproject.org> Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-16Merge tag 'modules-for-v4.15' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: "Summary of modules changes for the 4.15 merge window: - treewide module_param_call() cleanup, fix up set/get function prototype mismatches, from Kees Cook - minor code cleanups" * tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Do not paper over type mismatches in module_param_call() treewide: Fix function prototypes for module_param_call() module: Prepare to convert all module_param_call() prototypes kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
2017-11-09ACPI / EC: Fix regression related to triggering source of EC event handlingLv Zheng1-5/+7
Originally the Samsung quirks removed by commit 4c237371 can be covered by commit e923e8e7 and ec_freeze_events=Y mode. But commit 9c40f956 changed ec_freeze_events=Y back to N, making this problem re-surface. Actually, if commit e923e8e7 is robust enough, we can freely change ec_freeze_events mode, so this patch fixes the issue by improving commit e923e8e7. Related commits listed in the merged order: Commit: e923e8e79e18fd6be9162f1be6b99a002e9df2cb Subject: ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled Commit: 4c237371f290d1ed3b2071dd43554362137b1cce Subject: ACPI / EC: Remove old CLEAR_ON_RESUME quirk Commit: 9c40f956ce9b331493347d1b3cb7e384f7dc0581 Subject: Revert "ACPI / EC: Enable event freeze mode..." to fix a regression This patch not only fixes the reported post-resume EC event triggering source issue, but also fixes an unreported similar issue related to the driver bind by adding EC event triggering source in ec_install_handlers(). Fixes: e923e8e79e18 (ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled) Fixes: 4c237371f290 (ACPI / EC: Remove old CLEAR_ON_RESUME quirk) Fixes: 9c40f956ce9b (Revert "ACPI / EC: Enable event freeze mode..." to fix a regression) Link: https://bugzilla.kernel.org/show_bug.cgi?id=196833 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Reported-by: Alistair Hamilton <ahpatent@gmail.com> Tested-by: Alistair Hamilton <ahpatent@gmail.com> Cc: 4.11+ <stable@vger.kernel.org> # 4.11+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-31treewide: Fix function prototypes for module_param_call()Kees Cook1-2/+4
Several function prototypes for the set/get functions defined by module_param_call() have a slightly wrong argument types. This fixes those in an effort to clean up the calls when running under type-enforced compiler instrumentation for CFI. This is the result of running the following semantic patch: @match_module_param_call_function@ declarer name module_param_call; identifier _name, _set_func, _get_func; expression _arg, _mode; @@ module_param_call(_name, _set_func, _get_func, _arg, _mode); @fix_set_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._set_func; identifier _val, _param; type _val_type, _param_type; @@ int _set_func( -_val_type _val +const char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } @fix_get_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._get_func; identifier _val, _param; type _val_type, _param_type; @@ int _get_func( -_val_type _val +char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } Two additional by-hand changes are included for places where the above Coccinelle script didn't notice them: drivers/platform/x86/thinkpad_acpi.c fs/lockd/svc.c Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2017-09-14dmi: Mark all struct dmi_system_id instances constChristoph Hellwig1-1/+1
... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-08-19ACPI / EC: Clean up EC GPE mask flagLv Zheng1-12/+11
EC_FLAGS_COMMAND_STORM is actually used to mask GPE during IRQ processing. This patch cleans it up using more readable flag/function names. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Tested-by: Tomislav Ivek <tomislav.ivek@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-18ACPI: EC: Fix possible issues related to EC initialization orderLv Zheng1-9/+16
Use the observation that the EC command/data register addresses are sufficient to determine if two EC devices are equivelent to modify acpi_is_boot_ec(). Then, for the removed comparison factors, EC ID and EC GPE, they need to be synchronized for the boot_ec: 1. Before registering the BIOS-provided EC event handlers in acpi_ec_register_query_methods(), the namespace node holding _Qxx methods should be located. The real namespace PNP0C09 device location then is apparently more trustworthy than the ECDT EC ID. 2. Because of the ASUS quirks, the ECDT EC GPE is more trustworthy than the namespace PNP0C09 device's _GPE setting. Use the above observations to synchronize the boot_ec settings in acpi_ec_add(). Finally, change the order of acpi_ec_ecdt_start() and acpi_ec_add(), called from acpi_bus_register_driver(), so as to follow the fast path of determining the location of _Qxx. Signed-off-by: Lv Zheng <lv.zheng@intel.com> [ rjw : Changelog & comments ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-17ACPI: EC: Fix regression related to wrong ECDT initialization orderLv Zheng1-10/+7
Commit 2a5708409e4e (ACPI / EC: Fix a gap that ECDT EC cannot handle EC events) introduced acpi_ec_ecdt_start(), but that function is invoked before acpi_ec_query_init(), which is too early. This causes the kernel to crash if an EC event occurs after boot, when ec_query_wq is not valid: BUG: unable to handle kernel NULL pointer dereference at 0000000000000102 ... Workqueue: events acpi_ec_event_handler task: ffff9f539790dac0 task.stack: ffffb437c0e10000 RIP: 0010:__queue_work+0x32/0x430 Normally, the DSDT EC should always be valid, so acpi_ec_ecdt_start() is actually a no-op in the majority of cases. However, commit c712bb58d827 (ACPI / EC: Add support to skip boot stage DSDT probe) caused the probing of the DSDT EC as the "boot EC" to be skipped when the ECDT EC is valid and uncovered the bug. Fix this issue by invoking acpi_ec_ecdt_start() after acpi_ec_query_init() in acpi_ec_init(). Link: https://jira01.devtools.intel.com/browse/LCK-4348 Fixes: 2a5708409e4e (ACPI / EC: Fix a gap that ECDT EC cannot handle EC events) Fixes: c712bb58d827 (ACPI / EC: Add support to skip boot stage DSDT probe) Reported-by: Wang Wendy <wendy.wang@intel.com> Tested-by: Feng Chenzhou <chenzhoux.feng@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-20ACPI / PM / EC: Flush all EC work in acpi_freeze_sync()Rafael J. Wysocki1-0/+8
Commit eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle) introduced acpi_freeze_sync() whose purpose is to flush all of the processing of possible wakeup events signaled via the ACPI SCI. However, it doesn't flush the query workqueue used by the EC driver, so the events generated by the EC may not be processed timely which leads to issues (increased overhead at least, lost events possibly). To fix that introduce acpi_ec_flush_work() that will flush all of the outstanding EC work and call it from acpi_freeze_sync(). Fixes: eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-20Merge branch 'acpi-ec' into acpi-pmRafael J. Wysocki1-0/+31
2017-07-19ACPI / EC: Add parameter to force disable the GPE on suspendRafael J. Wysocki1-0/+31
After commit 8110dd281e15 (ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems) the configuration of GPEs, including the EC one, is not changed during suspend-to-idle on recent systems. That's in order to make system wakeup events generated by the EC work, in particular. However, on some of the systems in question (for example on Dell XPS13 9365), in addition to generating system wakeup events the EC generates a heartbeat sequence of interrupts that have nothing to do with wakeup while suspended, and the Low Power Idle S0 _DSM interface doesn't change that behavior. The users of those systems may prefer to disable the EC GPE during system suspend, for the cost of non-functional power button wakeup or similar, but currently there is no way to do that. For this reason, add a new module parameter, ec_no_wakeup, for the EC driver module that, if set, will cause the EC GPE to be disabled during system suspend and re-enabled during the subsequent system resume. Link: https://bugzilla.kernel.org/show_bug.cgi?id=192591#c106 Amends: 8110dd281e15 (ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems) Reported-and-tested-by: Patrik Kullman <patrik.kullman@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-14Merge branches 'acpi-ec', 'acpi-irq' and 'acpi-quirks'Rafael J. Wysocki1-20/+1
* acpi-ec: Revert "ACPI / EC: Enable event freeze mode..." to fix a regression ACPI / EC: Drop EC noirq hooks to fix a regression * acpi-irq: ACPI / irq: Fix return code of acpi_gsi_to_irq() * acpi-quirks: ACPI / x86: Add KIOX000A accelerometer on GPD win to always_present_ids array ACPI / x86: Add Dell Venue 11 Pro 7130 touchscreen to always_present_ids ACPI / x86: Allow matching always_present_id array entries by DMI
2017-07-12Revert "ACPI / EC: Enable event freeze mode..." to fix a regressionLv Zheng1-1/+1
On Lenovo ThinkPad X1 Carbon - the 5th Generation, enabling an earlier EC event freezing timing causes acpitz-virtual-0 to report a stuck 48C temparature. And with EC firmware revisioned as 1.14, without reverting back to old EC event freezing timing, the fan still blows up after a system resume. This reverts the culprit change so that the regression can be fixed without upgrading the EC firmware. Fixes: d30283057ecd (ACPI / EC: Enable event freeze mode to improve event handling) Link: https://bugzilla.kernel.org/show_bug.cgi?id=191181#c168 Tested-by: Damjan Georgievski <gdamjan@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-12ACPI / EC: Drop EC noirq hooks to fix a regressionLv Zheng1-19/+0
According to bug reports, although the busy polling mode can make noirq stages execute faster, it causes abnormal fan blowing up after system resume (see the first link below for a video demonstration) on Lenovo ThinkPad X1 Carbon - the 5th Generation. The problem can be fixed by upgrading the EC firmware on that machine. However, many reporters confirm that the problem can be fixed by stopping busy polling during suspend/resume and for some of them upgrading the EC firmware is not an option. For this reason, drop the noirq stage hooks from the EC driver to fix the regression. Fixes: c3a696b6e8f8 (ACPI / EC: Use busy polling mode when GPE is not enabled) Link: https://youtu.be/9NQ9x-Jm99Q Link: https://bugzilla.kernel.org/show_bug.cgi?id=196129 Reported-by: Andreas Lindhe <andreas@lindhe.io> Tested-by: Gjorgji Jankovski <j.gjorgji@gmail.com> Tested-by: Damjan Georgievski <gdamjan@gmail.com> Tested-by: Fernando Chaves <nanochaves@gmail.com> Tested-by: Tomislav Ivek <tomislav.ivek@gmail.com> Tested-by: Denis P. <theoriginal.skullburner@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-05Merge tag 'acpi-4.13-rc1' of ↵Linus Torvalds1-13/+71
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These mostly update the ACPICA code in the kernel to upstream revision 20170531 which covers all of the new material from ACPI 6.2, including new tables (WSMT, HMAT, PPTT), new subtables and definition changes for some existing tables (BGRT, HEST, SRAT, TPM2, PCCT), new resource descriptor macros for pin control, support for new predefined methods (_LSI, _LSR, _LSW, _HMA), fixes and cleanups. On top of that, an additional ACPICA change from Kees (which also is upstream already) switches all of the definitions of function pointer structures in ACPICA to use designated initializers so as to make the structure layout randomization GCC plugin work with it. The rest is a few fixes and cleanups in the EC driver, an xpower PMIC driver update, a new backlight blacklist entry, and update of the tables configfs interface and a messages formatting cleanup. Specifics: - Update the ACPICA code in the kernel to upstream revision revision 20170531 (which covers all of the new material from ACPI 6.2) including: * Support for the PinFunction(), PinConfig(), PinGroup(), PinGroupFunction(), and PinGroupConfig() resource descriptors (Mika Westerberg). * Support for new subtables in HEST and SRAT, new notify value for HEST, header support for TPM2 table changes, and BGRT Status field update (Bob Moore). * Support for new PCCT subtables (David Box). * Support for _LSI, _LSR, _LSW, and _HMA as predefined methods (Erik Schmauss). * Support for the new WSMT, HMAT, and PPTT tables (Lv Zheng). * New UUID values for Processor Properties (Bob Moore). * New notify values for memory attributes and graceful shutdown (Bob Moore). * Fix related to the PCAT_COMPAT MADT flag (Janosch Hildebrand). * Resource to AML conversion fix for resources containing GPIOs (Mika Westerberg). * Disassembler-related updates (Bob Moore, David Box, Erik Schmauss). * Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Lv Zheng, Cao Jin). - Modify ACPICA to always use designated initializers for function pointer structures to make the structure layout randomization GCC plugin work with it (Kees Cook). - Update the tables configfs interface to unload SSDTs on configfs entry removal (Jan Kiszka). - Add support for the GPI1 regulator to the xpower PMIC Operation Region handler (Hans de Goede). - Fix ACPI EC issues related to conflicting EC definitions in the ECDT and in the ACPI namespace (Lv Zheng, Carlo Caione, Chris Chiu). - Fix an interrupt storm issue in the EC driver and make its debug output work with dynamic debug as expected (Lv Zheng). - Add ACPI backlight quirk for Dell Precision 7510 (Shih-Yuan Lee). - Fix whitespace in pr_fmt() to align log entries properly in some places in the ACPI subsystem (Vincent Legoll)" * tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits) ACPI / EC: Add quirk for GL720VMK ACPI / EC: Fix media keys not working problem on some Asus laptops ACPI / EC: Add support to skip boot stage DSDT probe ACPI / EC: Enhance boot EC sanity check ACPI / video: Add quirks for the Dell Precision 7510 ACPI: EC: Fix EC command visibility for dynamic debug ACPI: EC: Fix an EC event IRQ storming issue ACPICA: Use designated initializers ACPICA: Update version to 20170531 ACPICA: Update a couple of debug output messages ACPICA: acpiexec: enhance local signal handler ACPICA: Simplify output for the ACPI Debug Object ACPICA: Unix application OSL: Correctly handle control-c (EINTR) ACPICA: Improvements for debug output only ACPICA: Disassembler: allow conflicting external declarations to be emitted. ACPICA: Disassembler: add external op to namespace on first pass ACPICA: Disassembler: prevent external op's from opening a new scope ACPICA: Changed Gbl_disasm_flag to acpi_gbl_disasm_flag ACPICA: Changing External to a named object ACPICA: Update two error messages to emit control method name ...
2017-07-03Merge branches 'acpi-ec' and 'acpi-video'Rafael J. Wysocki1-12/+70
* acpi-ec: ACPI / EC: Add quirk for GL720VMK ACPI / EC: Fix media keys not working problem on some Asus laptops ACPI / EC: Add support to skip boot stage DSDT probe ACPI / EC: Enhance boot EC sanity check ACPI: EC: Fix EC command visibility for dynamic debug ACPI: EC: Fix an EC event IRQ storming issue * acpi-video: ACPI / video: Add quirks for the Dell Precision 7510
2017-06-29ACPI / EC: Add quirk for GL720VMKCarlo Caione1-1/+5
ASUS GL720VMK is also affected by the EC GPE preference issue. Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-29ACPI / EC: Fix media keys not working problem on some Asus laptopsChris Chiu1-6/+43
Some Asus laptops (verified on X550VXK/FX502VD/FX502VE) get no interrupts when pressing media keys thus the corresponding functions are not invoked. It's due to the _GPE defines in DSDT for EC returns differnt value compared to the GPE Number in ECDT. Confirmed with Asus that the vale in ECDT is the correct one. This commit uses DMI quirks to prevent calling _GPE when doing ec_parse_device() and keep the ECDT GPE number setting for the EC device. With previous commit, it is ensured that if there is an ECDT, it can always be kept as boot_ec, this patch thus can implement a quirk on top of the determined ECDT boot_ec. Link: https://phabricator.endlessm.com/T16033 Link: https://phabricator.endlessm.com/T16722 Link: https://bugzilla.kernel.org/show_bug.cgi?id=195651 Tested-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-29ACPI / EC: Add support to skip boot stage DSDT probeLv Zheng1-0/+14
We prepared _INI/_STA methods for \_SB, \_SB.PCI0, \_SB.LID0 and \_SB.EC, _HID(PNP0C09)/_CRS/_GPE for \_SB.EC to poke Windows behavior with qemu, we got the following execution sequence: \_SB._INI \_SB.PCI0._STA \_SB.LID0._STA \_SB.EC._STA \_SB.PCI0._INI \_SB.LID0._INI \_SB.EC._INI There is no extra DSDT EC device enumeration process occurring before the main ACPI device enumeration process. That means acpi_ec_dsdt_probe() is not Windows-compatible. Tracking back, it was added by the following commit: Commit: c5279dee26c0e8d7c4200993bfc4b540d2469598 Subject: ACPI: EC: Add some basic check for ECDT data but that commit was misguided. Why we shouldn't enumerate DSDT EC before the main ACPI device enumeration? The only way to know if the DSDT EC is valid would be to evaluate its _STA control method, but it's not safe to evaluate this control method that early and out of the ACPI enumeration process, because _STA may refer to entities (such as resources or ACPI device objects) that may not have been initialized before OSPM starts to enumerate them via the main ACPI device enumeration. But after we had reverted back to the expected behavior, a regression was reported. On that platform, there is no ECDT, but the platform control methods access EC operation region earlier than Linux expects causing some ACPI method execution errors. For this reason, we just go back to old behavior to still probe DSDT EC as the boot EC. However, that turns out to lead to yet another functional breakage and in order to work around all of the problems, we skip boot stage DSDT probe when the ECDT exists so that a later quirk can always use correct ECDT GPE setting. Link: http://bugzilla.kernel.org/show_bug.cgi?id=11880 Link: http://bugzilla.kernel.org/show_bug.cgi?id=119261 Link: http://bugzilla.kernel.org/show_bug.cgi?id=195651 Tested-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> [ rjw: Changelog & comments massage ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-29ACPI / EC: Enhance boot EC sanity checkLv Zheng1-0/+2
It's reported that some buggy BIOS tables can contain 2 DSDT ECs, one of them is invalid but acpi_ec_dsdt_probe() fails to pick the valid one. This patch simply enhances sanity checks in ec_parse_device() as a workaround to skip probing wrong namespace ECs. Link: https://bugzilla.kernel.org/show_bug.cgi?id=195651 Tested-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-28ACPI: EC: Fix EC command visibility for dynamic debugLv Zheng1-1/+1
acpi_ec_cmd_string() currently is only enabled for "DEBUG" macro, but users trend to use CONFIG_DYNAMIC_DEBUG and enable ec.c pr_debug() print-outs by "dyndbg='file ec.c +p'". In this use case, all command names are turned into UNDEF and the log is confusing. This affects bugzilla triage work. This patch fixes this issue by enabling acpi_ec_cmd_string() for CONFIG_DYNAMIC_DEBUG. Tested-by: Wang Wendy <wendy.wang@intel.com> Tested-by: Feng Chenzhou <chenzhoux.feng@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-28ACPI: EC: Fix an EC event IRQ storming issueLv Zheng1-5/+6
The EC event IRQ (SCI_EVT) can only be handled by submitting QR_EC. As the EC driver handles SCI_EVT in a workqueue, after SCI_EVT is flagged and before QR_EC is submitted, there is a period risking IRQ storming. EC IRQ must be masked for this period but linux EC driver never does so. No end user notices the IRQ storming and no developer fixes this known issue because: 1. The EC IRQ is always edge triggered GPE, and 2. The kernel can execute no-op EC IRQ handler very fast. For edge-triggered EC GPE platforms, it is only reported of post-resume EC event lost issues, there won't be an IRQ storming. For level triggered EC GPE platforms, fortunately the kernel is always fast enough to execute such a no-op EC IRQ handler so that the IRQ handler won't be accumulated to starve the task contexts, causing a real IRQ storming. But the IRQ storming actually can still happen when: 1. The EC IRQ performs like level triggered GPE, and 2. The kernel EC debugging log is turned on but the console is slow enough. There are more and more platforms using EC GPE as wake GPE where the EC GPE is likely designed as level triggered. Then when EC debugging log is enabled, the EC IRQ handler is no longer a no-op but dumps IRQ status to the consoles. If the consoles are slow enough, the EC IRQs can arrive much faster than executing the handler. Finally the accumulated EC event IRQ handlers starve the task contexts, causing the IRQ storming to occur, and the kernel hangs can be observed during boot/resume. This patch fixes this issue by masking EC IRQ for this period: 1. Begins when there is an SCI_EVT IRQ pending, and 2. Ends when there is a QR_EC completed (SCI_EVT acknowledged). Tested-by: Wang Wendy <wendy.wang@intel.com> Tested-by: Feng Chenzhou <chenzhoux.feng@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-23ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systemsRafael J. Wysocki1-1/+1
Some recent Dell laptops, including the XPS13 model numbers 9360 and 9365, cannot be woken up from suspend-to-idle by pressing the power button which is unexpected and makes that feature less usable on those systems. Moreover, on the 9365 ACPI S3 (suspend-to-RAM) is not expected to be used at all (the OS these systems ship with never exercises the ACPI S3 path in the firmware) and suspend-to-idle is the only viable system suspend mechanism there. The reason why the power button wakeup from suspend-to-idle doesn't work on those systems is because their power button events are signaled by the EC (Embedded Controller), whose GPE (General Purpose Event) line is disabled during suspend-to-idle transitions in Linux. That is done on purpose, because in general the EC tends to be noisy for various reasons (battery and thermal updates and similar, for example) and all events signaled by it would kick the CPUs out of deep idle states while in suspend-to-idle, which effectively might defeat its purpose. Of course, on the Dell systems in question the EC GPE must be enabled during suspend-to-idle transitions for the button press events to be signaled while suspended at all, but fortunately there is a way out of this puzzle. First of all, those systems have the ACPI_FADT_LOW_POWER_S0 flag set in their ACPI tables, which means that the OS is expected to prefer the "low power S0 idle" system state over ACPI S3 on them. That causes the most recent versions of other OSes to simply ignore ACPI S3 on those systems, so it is reasonable to expect that it should not be necessary to block GPEs during suspend-to-idle on them. Second, in addition to that, the systems in question provide a special firmware interface that can be used to indicate to the platform that the OS is transitioning into a system-wide low-power state in which certain types of activity are not desirable or that it is leaving such a state and that (in principle) should allow the platform to adjust its operation mode accordingly. That interface is a special _DSM object under a System Power Management Controller device (PNP0D80). The expected way to use it is to invoke function 0 from it on system initialization, functions 3 and 5 during suspend transitions and functions 4 and 6 during resume transitions (to reverse the actions carried out by the former). In particular, function 5 from the "Low-Power S0" device _DSM is expected to cause the platform to put itself into a low-power operation mode which should include making the EC less verbose (so to speak). Next, on resume, function 6 switches the platform back to the "working-state" operation mode. In accordance with the above, modify the ACPI suspend-to-idle code to look for the "Low-Power S0" _DSM interface on platforms with the ACPI_FADT_LOW_POWER_S0 flag set in the ACPI tables. If it's there, use it during suspend-to-idle transitions as prescribed and avoid changing the GPE configuration in that case. [That should reflect what the most recent versions of other OSes do.] Also modify the ACPI EC driver to make it handle events during suspend-to-idle in the usual way if the "Low-Power S0" _DSM interface is going to be used to make the power button events work while suspended on the Dell machines mentioned above Link: http://www.uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-22ACPI: fix whitespace in pr_fmt() to align log entriesVincent Legoll1-1/+1
See this dmesg extract before the patch: [ 0.679466] ACPI: Dynamic OEM Table Load: [ 0.679470] ACPI: SSDT 0xFFFF910F6B497E00 00018A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.679579] ACPI: Executed 1 blocks of module-level executable AML code [ 0.681477] ACPI : EC: EC started [ 0.681478] ACPI : EC: interrupt blocked [ 0.684798] ACPI: Interpreter enabled [ 0.684835] ACPI: (supports S0 S3 S4 S5) Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-30ACPI / EC: Use busy polling mode when GPE is not enabledLv Zheng1-32/+30
When GPE is not enabled, it is not efficient to use the wait polling mode as it introduces an unexpected scheduler delay. So before the GPE handler is installed, this patch uses busy polling mode for all EC(s) and the logic can be applied to non boot EC(s) during the suspend/resume process. Link: https://bugzilla.kernel.org/show_bug.cgi?id=191561 Tested-by: Jakobus Schurz <jakobus.schurz@gmail.com> Tested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-30ACPI / EC: Remove old CLEAR_ON_RESUME quirkLv Zheng1-53/+0
IRQ polling logic has been implemented to drain the post-boot/resume EC events: 1. Triggered by the following code, invoked from acpi_ec_enable_event(): if (!test_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) advance_transaction(ec); 2. Drained by the following code, invoked after acpi_ec_complete_query(): if (status & ACPI_EC_FLAG_SCI) acpi_ec_submit_query(ec); This facility is safer than the old CLEAR_ON_RESUME quirk as the CLEAR_ON_RESUME quirk sends EC query commands unconditionally. The behavior is apparently not suitable for firmware that requires QUERY_HANDSHAKE quirk. Though the QUERY_HANDSHAKE quirk isn't used now because of the improvement done in the EC transaction state machine (ec_event_clearing=QUERY), it is the proof that we cannot send EC query command unconditionally. So it's time to delete the out-dated CLEAR_ON_RESUME quirk to let the users to try the newer approach. Link: https://bugzilla.kernel.org/show_bug.cgi?id=191211 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-10ACPI / EC: Fix unused function warning when CONFIG_PM_SLEEP=nEric Biggers1-0/+2
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10ACPI / EC: Fix issues related to boot_ecLv Zheng1-14/+49
There are issues related to the boot_ec: 1. If acpi_ec_remove() is invoked, boot_ec will also be freed, this is not expected as the boot_ec could be enumerated via ECDT. 2. Address space handler installation/unstallation lead to unexpected _REG evaluations. This patch adds acpi_is_boot_ec() check to be used to fix the above issues. However, since acpi_ec_remove() actually won't be invoked, this patch doesn't handle the reference counting of "struct acpi_ec", it only ensures the correctness of the boot_ec destruction during the boot. Link: https://bugzilla.kernel.org/show_bug.cgi?id=153511 Reported-and-tested-by: Jonh Henderson <jw.hendy@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10ACPI / EC: Fix a gap that ECDT EC cannot handle EC eventsLv Zheng1-23/+96
It is possible to register _Qxx from namespace and use the ECDT EC to perform event handling. The reported bug reveals that Windows is using ECDT in this way in case the namespace EC is not present. This patch facilitates Linux to support ECDT in this way. Link: https://bugzilla.kernel.org/show_bug.cgi?id=115021 Reported-and-tested-by: Luya Tshimbalanga <luya@fedoraproject.org> Tested-by: Jonh Henderson <jw.hendy@gmail.com> Reviewed-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10ACPI / EC: Fix a memory leakage issue in acpi_ec_add()Lv Zheng1-4/+12
When the handler installation failed, there was no code to free the allocated EC device. This patch fixes this memory leakage issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=115021 Reported-and-tested-by: Luya Tshimbalanga <luya@fedoraproject.org> Tested-by: Jonh Henderson <jw.hendy@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10ACPI / EC: Cleanup first_ec/boot_ec codeLv Zheng1-33/+63
In order to support full ECDT (driving the ECDT EC after probing the namespace EC), we need to change our EC device alloc/free algorithm, ensure not to free old boot EC before qualifying new boot EC. This patch achieves this by cleaning up first_ec/boot_ec logic: 1. first_ec: used to perform transactions, so it is assigned in new acpi_ec_setup() function. 2. boot_ec: used to track early EC device, so it is assigned in new acpi_config_boot_ec() function which explictly tells the driver to save the EC device as early EC device. Link: https://bugzilla.kernel.org/show_bug.cgi?id=115021 Reported-and-tested-by: Luya Tshimbalanga <luya@fedoraproject.org> Tested-by: Jonh Henderson <jw.hendy@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-31ACPI / EC: Enable event freeze mode to improve event handling for suspend ↵Lv Zheng1-1/+1
process This patch enables the event freeze mode, flushing the EC event handling in .suspend() callback. This feature is experimental, if it is bisected out to be the cause of the real issues, please report the issues to the kernel bugzilla for further root causing and improvement. This mode eliminates useless _Qxx handling during the power saving operations, thus can help to tune the power saving operations faster. Tests show that this mode can efficiently block flooding _Qxx during the suspend process and tune the speed of the suspend faster. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Tested-by: Todd E Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-31ACPI / EC: Add PM operations to improve event handling for suspend processLv Zheng1-5/+59
In the original EC driver, though the event handling is not explicitly stopped, the EC driver is actually not able to handle events during the noirq stage as the EC driver is not prepared to handle the EC events in the polling mode. So if there is no advance_transaction() triggered, the EC driver couldn't notice the EC events. However, do we actually need to handle EC events during suspend/resume stage? EC events are mostly useless for the suspend/resume period (key strokes and battery/thermal updates, etc.,), and the useful ones (lid close, power/sleep button press) should have already been delivered to the OSPM to trigger the power saving operations. Thus this patch implements acpi_ec_disable_event() to be a reverse call of acpi_ec_enable_event(), with which, the EC driver is able to stop handling the EC events in a position before entering the noirq stage. Since there are actually 2 choices for us: 1. implement event handling in polling mode; 2. stop event handling before entering noirq stage. And this patch only implements the second choice using .suspend() callback. Thus this is experimental (first choice is better? or different hook position is better?). This patch finally keeps the old behavior by default and prepares a boot parameter to enable this feature. The differences of the event handling availability between the old behavior (this patch is not applied) and the new behavior (this patch is applied) are as follows: !FreezeEvents FreezeEvents before suspend Y Y suspend before EC Y Y suspend after EC Y N suspend_late Y N suspend_noirq Y (actually N) N resume_noirq Y (actually N) N resume_late Y (actually N) N resume before EC Y (actually N) N resume after EC Y Y after resume Y Y Where "actually N" means if there is no EC transactions, the EC driver is actually not able to notice the pending events. We can see that FreezeEvents is the only approach now can actually flush the EC event handling with both query commands and _Qxx evaluations flushed, other modes can only flush the EC event handling with only query commands flushed, _Qxx evaluations occurred after stopping the EC driver may end up failure due to the failure of the EC transaction carried out in the _Qxx control methods. We also can see that this feature should be able to trigger some platform notifications later than resuming other drivers. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Tested-by: Todd E Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-31ACPI / EC: Add PM operations to improve event handling for resume processLv Zheng1-15/+11
This patch makes 2 changes: 1. Restore old behavior Originally, EC driver stops handling both events and transactions in acpi_ec_block_transactions(), and restarts to handle transactions in acpi_ec_unblock_transactions_early(), restarts to handle both events and transactions in acpi_ec_unblock_transactions(). While currently, EC driver still stops handling both events and transactions in acpi_ec_block_transactions(), but restarts to handle both events and transactions in acpi_ec_unblock_transactions_early(). This patch tries to restore the old behavior by dropping __acpi_ec_enable_event() from acpi_unblock_transactions_early(). 2. Improve old behavior However this still cannot fix the real issue as both of the acpi_ec_unblock_xxx() functions are invoked in the noirq stage. Since the EC driver actually doesn't implement the event handling in the polling mode, re-enabling the event handling too early in the noirq stage could result in the problem that if there is no triggering source causing advance_transaction() to be invoked, pending SCI_EVT cannot be detected by the EC driver and _Qxx cannot be triggered. It actually makes sense to restart the event handling in any point during resuming after the noirq stage. Just like the boot stage where the event handling is enabled in .add(), this patch further moves acpi_ec_enable_event() to .resume(). After doing that, the following 2 functions can be combined: acpi_ec_unblock_transactions_early()/acpi_ec_unblock_transactions(). The differences of the event handling availability between the old behavior (this patch isn't applied) and the new behavior (this patch is applied) are as follows: !Applied Applied before suspend Y Y suspend before EC Y Y suspend after EC Y Y suspend_late Y Y suspend_noirq Y (actually N) Y (actually N) resume_noirq Y (actually N) Y (actually N) resume_late Y (actually N) Y (actually N) resume before EC Y (actually N) Y (actually N) resume after EC Y (actually N) Y after resume Y (actually N) Y Where "actually N" means if there is no triggering source, the EC driver is actually not able to notice the pending SCI_EVT occurred in the noirq stage. So we can clearly see that this patch has improved the situation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Tested-by: Todd E Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-31ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabledLv Zheng1-0/+2
After enabling the EC event handling, Linux is still in the noirq stage, if there is no triggering source (EC transaction, GPE STS status), advance_transaction() will not be invoked and SCI_EVT cannot be detected. This patch adds one more triggering source after enabling the EC event handling to poll the pending SCI_EVT. Known issues: 1. Still no SCI_EVT triggering source There could still be no SCI_EVT triggering source after handling the first SCI_EVT (polled by this patch if any). Because after handling the first SCI_EVT, Linux could still be in noirq stage and there could still be no further triggering source in this stage. Then the second SCI_EVT indicated during this stage still cannot be detected by the EC driver. With this improvement applied, it is then possible to move acpi_ec_enable_event() out of the noirq stage to fix this issue (if the first SCI_EVT is handled out of the noirq stage, the follow-up SCI_EVTs should be able to trigger IRQs). Signed-off-by: Lv Zheng <lv.zheng@intel.com> Tested-by: Todd E Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-31ACPI / EC: Add EC_FLAGS_QUERY_ENABLED to reveal a hidden logicLv Zheng1-32/+71
There is a hidden logic in the EC driver: 1. During boot, EC_FLAGS_QUERY_PENDING is responsible for blocking event handling; 2. During suspend, EC_FLAGS_STARTED is responsible for blocking event handling. This patch uses a new EC_FLAGS_QUERY_ENABLED flag to make this hidden logic explicit and have code cleaned up. No functional change. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Tested-by: Todd E Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-17ACPI / EC: Add PM operations for suspend/resume noirq stageLv Zheng1-0/+53
It is reported that on some platforms, resume speed is not fast. The cause is: in noirq stage, EC driver is working in polling mode, and each state machine advancement requires a context switch. The context switch is not necessary to the EC driver's polling mode. This patch implements PM hooks to automatically switch the driver to/from the busy polling mode to eliminate the overhead caused by the context switch. This finally contributes to the tuning result: acpi_pm_finish() execution time is improved from 192ms to 6ms. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Reported-and-tested-by: Todd E Brandt <todd.e.brandt@linux.intel.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-05Merge branches 'acpi-ec' and 'acpi-button'Rafael J. Wysocki1-4/+37
* acpi-ec: ACPI / EC: Work around method reentrancy limit in ACPICA for _Qxx * acpi-button: ACPI / button: remove pointer to old lid_sysfs on unbind
2016-08-04ACPI / EC: Work around method reentrancy limit in ACPICA for _QxxLv Zheng1-4/+37
A regression is caused by the following commit: Commit: 02b771b64b73226052d6e731a0987db3b47281e9 Subject: ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations In this commit, using system workqueue causes that the maximum parallel executions of _Qxx can exceed 255. This violates the method reentrancy limit in ACPICA and generates the following error log: ACPI Error: Method reached maximum reentrancy limit (255) (20150818/dsmethod-341) This patch creates a seperate workqueue and limits the number of parallel _Qxx evaluations down to a configurable value (can be tuned against number of online CPUs). Since EC events are handled after driver probe, we can create the workqueue in acpi_ec_init(). Fixes: 02b771b64b73 (ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations) Link: https://bugzilla.kernel.org/show_bug.cgi?id=135691 Cc: 4.3+ <stable@vger.kernel.org> # 4.3+ Reported-and-tested-by: Helen Buus <ubuntu@hbuus.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-25Merge branches 'acpi-ec', 'acpi-video', 'acpi-button' and 'acpi-thermal'Rafael J. Wysocki1-53/+53
* acpi-ec: ACPI / EC: Remove wrong ECDT correction quirks ACPI / EC: Cleanup boot EC code using acpi_ec_alloc() * acpi-video: ACPI / video: Dummy acpi_video_register should return error code ACPI / video: skip evaluating _DOD when it does not exist ACPI / video: Thinkpad X201 Tablet needs video_detect_force_video * acpi-button: ACPI / button: Add quirks for initial lid state notification ACPI / button: Refactor functions to eliminate redundant code ACPI / button: Remove initial lid state notification * acpi-thermal: ACPI / thermal: Remove create_workqueue()
2016-07-08ACPI / EC: Fix code ordering issue in ec_remove_handlers()Lv Zheng1-2/+13
There is an order issue in ec_remove_handlers() that acpi_ec_stop() is called before removing the operation region handler. That is incorrect, because the operation region handler removal triggers _REG(DISCONNECT) which may result in new EC transactions to carry out. That existing issue has been triggered by the following commit: Commit: dcf15cbded656a12335bc4151f3f75f10080a375 Subject: ACPI / EC: Fix a boot EC regresion by restoring boot EC which changed the driver to call ec_remove_handlers() after invoking _REG(CONNECT), so the issue has become visible. Fixes: dcf15cbded65 (ACPI / EC: Fix a boot EC regresion by restoring boot EC) Link: https://bugzilla.kernel.org/show_bug.cgi?id=102421 Reported-and-tested-by: Wolfram Sang <wsa@the-dreams.de> Reported-by: Nicholas <nkudriavtsev@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-04ACPI / EC: Remove wrong ECDT correction quirksLv Zheng1-16/+5
Our Windows probe result shows that EC._REG is evaluated after evaluating all _INI/_STA control methods. With boot EC always switched in acpi_ec_dsdt_probe(), we can see that as long as there is no EC opregion accesses in the MLC (module level code, AML code out of any control methods) and in _INI/_STA, there is no need to make sure that ECDT must be correct. Bugs of 9399/12461 were reported against an order issue that BAT0/1._STA evaluations contain EC accesses while the ECDT setting is wrong. >From the acpidump output posted on bug 9399, we can see that it is actually a different issue. In this table, if EC._REG is not executed, EC accesses will be done in a platform specific manner. As we've already ensured not to execute EC._REG during the eary stage, we can remove the quirks for bug 9399. From the acpidump output posted on bug 12461, we can see that it still needs the quirk. In this table, EC._REG flags a named object whose default value is One, thus BAT1._STA surely should invoke EC accesses whatever we invoke EC._REG or not. We have to keep the quirk for it before we can root cause the issue. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-04ACPI / EC: Cleanup boot EC code using acpi_ec_alloc()Lv Zheng1-37/+48
Failure handling of the boot EC code is not tidy. This patch cleans them up with acpi_ec_alloc(). This patch also changes acpi_ec_dsdt_probe(), always switches the boot EC from the ECDT one to the DSDT one in this function. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-07ACPI / EC: Fix a boot EC regresion by restoring boot EC support for the DSDT ECLv Zheng1-7/+22
According to the Windows probing result, during the table loading, the EC device described in the ECDT should be used. And the ECDT EC is also effective during the period the namespace objects are initialized (we can see a separate process executing _STA/_INI on Windows before executing other device specific control methods, for example, EC._REG). During the device enumration, the EC device described in the DSDT should be used. But there are differences between Linux and Windows around the device probing order. Thus in Linux, we should enable the DSDT EC as early as possible before enumerating devices in order not to trigger issues related to the device enumeration order differences. This patch thus converts acpi_boot_ec_enable() into acpi_ec_dsdt_probe() to fix the gap. This also fixes a user reported regression triggered after we switched the "table loading"/"ECDT support" to be ACPI spec 2.0 compliant. Fixes: 59f0aa9480cf (ACPI 2.0 / ECDT: Remove early namespace reference from EC) Link: https://bugzilla.kernel.org/show_bug.cgi?id=119261 Reported-and-tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-09ACPI 2.0 / ECDT: Remove early namespace reference from ECLv Zheng1-91/+54
All operation region accesses are allowed by AML interpreter when AML is executed, so actually BIOSen are responsible to avoid the operation region accesses in AML before OSPM has prepared an operation region driver. This is done via _REG control method. So AML code normally sets a global named object REGC to 1 when _REG(3, 1) is evaluated. Then what is ECDT? Quoting from ACPI spec 6.0, 5.2.15 Embedded Controller Boot Resources Table (ECDT): "The presence of this table allows OSPM to provide Embedded Controller operation region space access before the namespace has been evaluated." Spec also suggests a compatible mean to indicate the early EC access availability: Device (EC) { Name (REGC, Ones) Method (_REG, 2) { If (LEqual (Arg0, 3)) { Store (Arg1, REGC) } } Method (ECAV) { If (LEqual (REGC, Ones)) { If (LGreaterEqual (_REV, 2)) { Return (One) } Else { Return (Zero) } } Else { Return (REGC) } } } In this way, it allows EC accesses to happen before EC._REG(3, 1) is invoked. But ECAV is not the only way practical BIOSen using to indicate the early EC access availibility, the known variations include: 1. Setting REGC to One in \_SB._INI when _REV >= 2. Since \_SB._INI is the first control method evaluated by OSPM during the enumeration, this allows EC accesses to happen for the entire enumeration process before the namespace EC is enumerated. 2. Initialize REGC to One by default, this even allows EC accesses to happen during the table loading. Linux is now broken around ECDT support during the long term bug fixing work because it has merged many wrong ECDT bug fixes (see details below). Linux currently uses namespace EC's settings instead of ECDT settings when ECDT is detected. This apparently will result in namespace walk and _CRS/_GPE/_REG evaluations. Such stuffs could only happen after namespace is ready, while ECDT is purposely to be used before namespace is ready. The wrong bug fixing story is: 1. Link 1: At Linux ACPI early stages, "no _Lxx/_Exx/_Qxx evaluation can happen before the namespace is ready" are not ensured by ACPICA core and Linux. This is currently ensured by deferred enabling of GPE and defered registering of EC query methods (acpi_ec_register_query_methods). 2. Link 2: Reporters reported buggy ECDTs, expecting quirks for the platform. Originally, the quirk is simple, only doing things with ECDT. Bug 9399 and 12461 are platforms (Asus L4R, Asus M6R, MSI MS-171F) reported to have wrong ECDT IO port addresses, the port addresses are reversed. Bug 11880 is a platform (Asus X50GL) reported to have 0 valued port addresses, we can see that all EC accesses are protected by ECAV on this platform, so actually no early EC accesses is required by this platform. 3. Link 3: But when the bug fixing developer was requested to provide a handy and non-quirk bug fix, he tried to use correct EC settings from namespace and broke the spec purpose. We can even see that the developer was suffered from many regrssions. One interesting one is 14086, where the actual root cause obviously should be: _REG is evaluated too early. But unfortunately, the bug is fixed in a totally wrong way. So everything goes wrong from these commits: Commit: c6cb0e878446c79f42e7833d7bb69ed6bfbb381f Subject: ACPI: EC: Don't trust ECDT tables from ASUS Commit: a5032bfdd9c80e0231a6324661e123818eb46ecd Subject: ACPI: EC: Always parse EC device This patch reverts Linux behavior to simple ECDT quirk support in order to stop early _CRS/_GPE/_REG evaluations. For Bug 9399, 12461, since it is reported that the platforms require early EC accesses, this patch restores the simple ECDT quirks for them. For Bug 11880, since it is not reported that the platform requires early EC accesses and its ACPI tables contain correct ECAV, we choose an ECDT enumeration failure for this platform. Link 1: https://bugzilla.kernel.org/show_bug.cgi?id=9916 http://bugzilla.kernel.org/show_bug.cgi?id=10100 https://lkml.org/lkml/2008/2/25/282 Link 2: https://bugzilla.kernel.org/show_bug.cgi?id=9399 https://bugzilla.kernel.org/show_bug.cgi?id=12461 https://bugzilla.kernel.org/show_bug.cgi?id=11880 Link 3: https://bugzilla.kernel.org/show_bug.cgi?id=11884 https://bugzilla.kernel.org/show_bug.cgi?id=14081 https://bugzilla.kernel.org/show_bug.cgi?id=14086 https://bugzilla.kernel.org/show_bug.cgi?id=14446 Link 4: https://bugzilla.kernel.org/show_bug.cgi?id=112911 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-09ACPI 2.0 / ECDT: Split EC_FLAGS_HANDLERS_INSTALLEDLv Zheng1-41/+55
This patch splits EC_FLAGS_HANDLERS_INSTALLED so that address space handler can be installed when it is not possible to install GPE handler during early stage. This patch also tunes address space handler installation, making it happening earlier than GPE handler installation for the same purpose. Since acpi_ec_start()/acpi_ec_stop() will be entered multiple times after applying this change, it is also required to protect acpi_enable_gpe()/ acpi_disable_gpe() invocations. Link: https://bugzilla.kernel.org/show_bug.cgi?id=112911 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-17ACPI-EC: Drop unnecessary check made before calling acpi_ec_delete_query()Markus Elfring1-1/+1
The acpi_ec_delete_query() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>