summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)AuthorFilesLines
2015-09-15ACPI: Eliminate CONFIG_.*{, _MODULE} #ifdef in favor of IS_ENABLED()Sudeep Holla2-13/+8
This commit removes all CONFIG_.*{,_MODULE} in ACPI code, replacing it with IS_ENABLED(). Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-15ACPI: int340x_thermal: add missing CONFIG_ prefixSudeep Holla1-1/+1
This patch adds the missing CONFIG_ prefix to INTEL_SOC_DTS_THERMAL macros. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-12Merge branch 'next' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal updates from Zhang Rui: - use int instead of unsigned long to represent temperature to avoid bogus overheat detection when negative temperature reported. From Sascha Hauer. - export available thermal governors information to user space via sysfs. From Wei Ni. - introduce new thermal driver for Wildcat Point platform controller hub, which uses PCH thermal sensor and associated critical and hot trip points. From Tushar Dave. - add suuport for Intel Skylake and Denlow platforms in powerclamp driver. - some small cleanups in thermal core. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: Add Intel PCH thermal driver thermal: Add comment explaining test for critical temperature thermal: Use IS_ENABLED instead of #ifdef thermal: remove unnecessary call to thermal_zone_device_set_polling thermal: trivial: fix typo in comment thermal: consistently use int for temperatures thermal: add available policies sysfs attribute thermal/powerclamp: add cpu id for denlow platform thermal/powerclamp: add cpu id for Skylake u/y thermal/powerclamp: add cpu id for skylake h/s
2015-09-09Merge tag 'for-linus-4.3' of git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds1-2/+0
Pull IPMI updates from Corey Minyard: "Most of these have been sitting in linux-next for more than a release, particularly commit 0fbcf4af7c83 ("ipmi: Convert the IPMI SI ACPI handling to a platform device") which is probably the most complex patch. That is also the one that changes drivers/acpi/acpi_pnp.c. The change in that file is only removing IPMI from a "special platform devices" list, since I convert it to the standard PNP interface. I posted this one to the ACPI list twice and got no response, and it seems to work well in my testing, so I'm hoping it's good. Hidehiro Kawai posted a set of changes that improves the panic time handling in the IPMI driver. The rest of the changes are minor bug fixes or cleanups and some documentation" * tag 'for-linus-4.3' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi:ssif: Add a module parm to specify that SMBus alerts don't work ipmi: add of_device_id in MODULE_DEVICE_TABLE ipmi: Compensate for BMCs that wont set the irq enable bit ipmi: Don't call receive handler in the panic context ipmi: Avoid touching possible corrupted lists in the panic context ipmi: Don't flush messages in sender() in run-to-completion mode ipmi: Factor out message flushing procedure ipmi: Remove unneeded set_run_to_completion call ipmi: Make some data const that was only read ipmi: constify SSIF ACPI device ids ipmi: Delete an unnecessary check before the function call "cleanup_one_si" char:ipmi - Change 1 to true for bool type variables during initialization. impi:Remove unneeded setting of module owner to THIS_MODULE in the platform structure, powernv_ipmi_driver ipmi: Add a comment in how messages are delivered from the lower layer ipmi/powernv: Fix potential invalid pointer dereference ipmi: Convert the IPMI SI ACPI handling to a platform device ipmi: Add device tree bindings information
2015-09-09Merge tag 'libnvdimm-for-4.3' of ↵Linus Torvalds3-48/+49
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "This update has successfully completed a 0day-kbuild run and has appeared in a linux-next release. The changes outside of the typical drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and the introduction of ZONE_DEVICE + devm_memremap_pages(). Summary: - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic mechanism for adding device-driver-discovered memory regions to the kernel's direct map. This facility is used by the pmem driver to enable pfn_to_page() operations on the page frames returned by DAX ('direct_access' in 'struct block_device_operations'). For now, the 'memmap' allocation for these "device" pages comes from "System RAM". Support for allocating the memmap from device memory will arrive in a later kernel. - Introduce memremap() to replace usages of ioremap_cache() and ioremap_wt(). memremap() drops the __iomem annotation for these mappings to memory that do not have i/o side effects. The replacement of ioremap_cache() with memremap() is limited to the pmem driver to ease merging the api change in v4.3. Completion of the conversion is targeted for v4.4. - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem driver, update the VFS DAX implementation and PMEM api to provide persistence guarantees for kernel operations on a DAX mapping. - Convert the ACPI NFIT 'BLK' driver to map the block apertures as cacheable to improve performance. - Miscellaneous updates and fixes to libnvdimm including support for issuing "address range scrub" commands, clarifying the optimal 'sector size' of pmem devices, a clarification of the usage of the ACPI '_STA' (status) property for DIMM devices, and other minor fixes" * tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits) libnvdimm, pmem: direct map legacy pmem by default libnvdimm, pmem: 'struct page' for pmem libnvdimm, pfn: 'struct page' provider infrastructure x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB add devm_memremap_pages mm: ZONE_DEVICE for "device memory" mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h dax: drop size parameter to ->direct_access() nd_blk: change aperture mapping from WC to WB nvdimm: change to use generic kvfree() pmem, dax: have direct_access use __pmem annotation dax: update I/O path to do proper PMEM flushing pmem: add copy_from_iter_pmem() and clear_pmem() pmem, x86: clean up conditional pmem includes pmem: remove layer when calling arch_has_wmb_pmem() pmem, x86: move x86 PMEM API to new pmem.h header libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option pmem: switch to devm_ allocations devres: add devm_memremap libnvdimm, btt: write and validate parent_uuid ...
2015-09-03ipmi: Convert the IPMI SI ACPI handling to a platform deviceCorey Minyard1-2/+0
The IPMI SI driver was using direct PNP, but that was not really ideal because the IPMI device is a platform device. There was some special handling in the acpi_pnp.c code for making this work, but that was breaking ACPI handling for the IPMI SSIF driver. So without this patch there were significant issues getting the SSIF driver to work with ACPI. So use a platform device for ACPI detection and remove the entry from acpi_pnp.c. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-09-02Merge tag 'pm+acpi-4.3-rc1' of ↵Linus Torvalds105-2033/+2884
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "From the number of commits perspective, the biggest items are ACPICA and cpufreq changes with the latter taking the lead (over 50 commits). On the cpufreq front, there are many cleanups and minor fixes in the core and governors, driver updates etc. We also have a new cpufreq driver for Mediatek MT8173 chips. ACPICA mostly updates its debug infrastructure and adds a number of fixes and cleanups for a good measure. The Operating Performance Points (OPP) framework is updated with new DT bindings and support for them among other things. We have a few updates of the generic power domains framework and a reorganization of the ACPI device enumeration code and bus type operations. And a lot of fixes and cleanups all over. Included is one branch from the MFD tree as it contains some PM-related driver core and ACPI PM changes a few other commits are based on. Specifics: - ACPICA update to upstream revision 20150818 including method tracing extensions to allow more in-depth AML debugging in the kernel and a number of assorted fixes and cleanups (Bob Moore, Lv Zheng, Markus Elfring). - ACPI sysfs code updates and a documentation update related to AML method tracing (Lv Zheng). - ACPI EC driver fix related to serialized evaluations of _Qxx methods and ACPI tools updates allowing the EC userspace tool to be built from the kernel source (Lv Zheng). - ACPI processor driver updates preparing it for future introduction of CPPC support and ACPI PCC mailbox driver updates (Ashwin Chaugule). - ACPI interrupts enumeration fix for a regression related to the handling of IRQ attribute conflicts between MADT and the ACPI namespace (Jiang Liu). - Fixes related to ACPI device PM (Mika Westerberg, Srinidhi Kasagar). - ACPI device registration code reorganization to separate the sysfs-related code and bus type operations from the rest (Rafael J Wysocki). - Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause, Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss). - ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups (Pan Xinhui, Rafael J Wysocki). - cpufreq core cleanups on top of the previous changes allowing it to preseve its sysfs directories over system suspend/resume (Viresh Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior). - cpufreq fixes and cleanups related to governors (Viresh Kumar). - cpufreq updates (core and the cpufreq-dt driver) related to the turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz). - New DT bindings for Operating Performance Points (OPP), support for them in the OPP framework and in the cpufreq-dt driver plus related OPP framework fixes and cleanups (Viresh Kumar). - cpufreq powernv driver updates (Shilpasri G Bhat). - New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen). - Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean). - intel_pstate driver updates including Skylake-S support, support for enabling HW P-states per CPU and an additional vendor bypass list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao). - cpuidle core fixes related to the handling of coupled idle states (Xunlei Pang). - intel_idle driver updates including Skylake Client support and support for freeze-mode-specific idle states (Len Brown). - Driver core updates related to power management (Andy Shevchenko, Rafael J Wysocki). - Generic power domains framework fixes and cleanups (Jon Hunter, Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson). - Device PM QoS framework update to allow the latency tolerance setting to be exposed to user space via sysfs (Mika Westerberg). - devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas). - System sleep support updates (Alan Stern, Len Brown, SungEun Kim). - rockchip-io AVS support updates (Heiko Stuebner). - PM core clocks support fixup (Colin Ian King). - Power capping RAPL driver update including support for Skylake H/S and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi). - Generic device properties framework fixes related to the handling of static (driver-provided) property sets (Andy Shevchenko). - turbostat and cpupower updates (Len Brown, Shilpasri G Bhat, Shreyas B Prabhu)" * tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (180 commits) cpufreq: speedstep-lib: Use monotonic clock cpufreq: powernv: Increase the verbosity of OCC console messages cpufreq: sfi: use kmemdup rather than duplicating its implementation cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor() cpufreq: rename cpufreq_real_policy as cpufreq_user_policy cpufreq: remove redundant 'policy' field from user_policy cpufreq: remove redundant 'governor' field from user_policy cpufreq: update user_policy.* on success cpufreq: use memcpy() to copy policy cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event cpufreq: mediatek: Add MT8173 cpufreq driver dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings PM / Domains: Fix typo in description of genpd_dev_pm_detach() PM / Domains: Remove unusable governor dummies PM / Domains: Make pm_genpd_init() available to modules PM / domains: Align column headers and data in pm_genpd_summary output powercap / RAPL: disable the 2nd power limit properly tools: cpupower: Fix error when running cpupower monitor PM / OPP: Drop unlikely before IS_ERR(_OR_NULL) PM / OPP: Fix static checker warning (broken 64bit big endian systems) ...
2015-09-02Merge branches 'thermal-core' and 'thermal-intel' of .git into nextZhang Rui1-6/+6
2015-09-01Merge branch 'pm-cpufreq'Rafael J. Wysocki1-4/+2
* pm-cpufreq: (53 commits) cpufreq: speedstep-lib: Use monotonic clock cpufreq: powernv: Increase the verbosity of OCC console messages cpufreq: sfi: use kmemdup rather than duplicating its implementation cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor() cpufreq: rename cpufreq_real_policy as cpufreq_user_policy cpufreq: remove redundant 'policy' field from user_policy cpufreq: remove redundant 'governor' field from user_policy cpufreq: update user_policy.* on success cpufreq: use memcpy() to copy policy cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event cpufreq: mediatek: Add MT8173 cpufreq driver dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings intel_pstate: append more Oracle OEM table id to vendor bypass list intel_pstate: Add SKY-S support intel_pstate: Fix possible overflow complained by Coverity cpufreq: Correct a freq check in cpufreq_set_policy() cpufreq: Lock CPU online/offline in cpufreq_register_driver() cpufreq: Replace recover_policy with new_policy in cpufreq_online() cpufreq: Separate CPU device registration from CPU online cpufreq: powernv: Restore cpu frequency to policy->cur on unthrottling ...
2015-09-01cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier eventViresh Kumar1-1/+1
What's being done from CPUFREQ_INCOMPATIBLE, can also be done with CPUFREQ_ADJUST. There is nothing special with CPUFREQ_INCOMPATIBLE notifier. Kill CPUFREQ_INCOMPATIBLE and fix its usage sites. This also updates the numbering of notifier events to remove holes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-01Merge branch 'device-properties'Rafael J. Wysocki1-2/+3
* device-properties: device property: check fwnode type in to_of_node() device property: attach 'else if' to the proper 'if' device property: fallback to pset when gettng one string device property: fix potential NULL pointer dereference
2015-09-01Merge branches 'acpi-pci', 'acpi-soc', 'acpi-ec' and 'acpi-osl'Rafael J. Wysocki4-58/+111
* acpi-pci: ACPI, PCI: Penalize legacy IRQ used by ACPI SCI * acpi-soc: ACPI / LPSS: Ignore 10ms delay for Braswell * acpi-ec: ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations * acpi-osl: ACPI / osl: replace custom implementation of readq / writeq
2015-09-01Merge branch 'acpi-pm'Rafael J. Wysocki5-23/+57
* acpi-pm: ACPI / bus: Move duplicate code to a separate new function mfd: Add support for Intel Sunrisepoint LPSS devices dmaengine: add a driver for Intel integrated DMA 64-bit mfd: make mfd_remove_devices() iterate in reverse order driver core: implement device_for_each_child_reverse() klist: implement klist_prev() Driver core: wakeup the parent device before trying probe ACPI / PM: Attach ACPI power domain only once PM / QoS: Make it possible to expose device latency tolerance to userspace ACPI / PM: Update the copyright notice and description of power.c
2015-09-01Merge branches 'acpi-scan', 'acpi-processor' and 'acpi-assorted'Rafael J. Wysocki46-1060/+992
* acpi-scan: ACPI / bus: Move ACPI bus type registration ACPI / scan: Move bus operations and notification routines to bus.c ACPI / scan: Move device matching code to bus.c ACPI / scan: Move sysfs-related device code to a separate file * acpi-processor: PCC: Disable compilation by default ACPI: Decouple ACPI idle and ACPI processor drivers ACPI: Split out ACPI PSS from ACPI Processor driver PCC: Initialize PCC Mailbox earlier at boot ACPI / processor: remove leftover __refdata annotations * acpi-assorted: ACPI: fix acpi_debugfs_init prototype ACPI: Remove FSF mailing addresses
2015-09-01Merge branch 'acpi-trace'Rafael J. Wysocki2-35/+106
* acpi-trace: ACPI / Documentation: Update method tracing documentation. ACPI / sysfs: Add support to allow leading "\" missing in trace_method_name. ACPI / sysfs: Update method tracing facility. ACPI / sysfs: Add ACPI_LV_REPAIR debug level.
2015-09-01Merge branch 'acpica'Rafael J. Wysocki56-867/+1629
* acpica: (42 commits) ACPICA: Update version to 20150818 ACPICA: Debugger: Cleanup debugging outputs to dump name path without trailing underscores ACPICA: Disassembler: Cleanup acpi_gbl_db_opt_verbose acpiexec usage ACPICA: Disassembler: Cleanup acpi_gbl_db_opt_disasm ACPICA: Debugger: Split debugger initialization/termination APIs ACPICA: Header support to improve compatibility with MSVC ACPICA: Make the max-number-of-loops runtime configurable ACPICA: Debugger: Add option to display namespace summary/counts ACPICA: Add additional debug info/statements ACPICA: Table handling: Cleanup and update debug output for tools ACPICA: acpiexec/acpinames: Support very large number of ACPI tables ACPICA: acpinames: Add new options and wildcard support ACPICA: Headers: Fix some comments, no functional change ACPICA: Tables: Cleanup to reduce FACS globals ACPICA: Tables: Fix global table list issues by removing fixed table indexes ACPICA: Update info messages during ACPICA init ACPICA: Disassembler: Update for new listing mode ACPICA: Update parameter validation for data_table_region and load_table ACPICA: Disassembler: Remove duplicate code in _PLD processing. ACPICA: Correctly cleanup after a ACPI table load failure ...
2015-09-01Merge tag 'clk-for-linus-4.3' of ↵Linus Torvalds2-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Michael Turquette: "The clk framework changes for 4.3 are mostly updates to existing drivers and the addition of new clock drivers. Stephen Boyd has also done a lot of subsystem-wide driver clean-ups (thanks!). There are also fixes to the framework core and changes to better split clock provider drivers from clock consumer drivers" * tag 'clk-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits) clk: s5pv210: add missing call to samsung_clk_of_add_provider() clk: pistachio: correct critical clock list clk: pistachio: Fix PLL rate calculation in integer mode clk: pistachio: Fix override of clk-pll settings from boot loader clk: pistachio: Fix 32bit integer overflows clk: tegra: Fix some static checker problems clk: qcom: Fix MSM8916 prng clock enable bit clk: Add missing header for 'bool' definition to clk-conf.h drivers/clk: appropriate __init annotation for const data clk: rockchip: register pll mux before pll itself clk: add bindings for the Ux500 clocks clk/ARM: move Ux500 PRCC bases to the device tree clk: remove duplicated code with __clk_set_parent_after clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw) clk: Constify clk_hw argument to provider APIs clk: Hi6220: add stub clock driver dt-bindings: clk: Hi6220: Document stub clock driver dt-bindings: arm: Hi6220: add doc for SRAM controller clk: atlas7: fix pll missed divide NR in fraction mode clk: atlas7: fix bit field and its root clk for coresight_tpiu ...
2015-09-01Merge tag 'pci-v4.3-changes' of ↵Linus Torvalds1-13/+4
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.3 merge window: Enumeration: - Allocate ATS struct during enumeration (Bjorn Helgaas) - Embed ATS info directly into struct pci_dev (Bjorn Helgaas) - Reduce size of ATS structure elements (Bjorn Helgaas) - Stop caching ATS Invalidate Queue Depth (Bjorn Helgaas) - iommu/vt-d: Cache PCI ATS state and Invalidate Queue Depth (Bjorn Helgaas) - Move MPS configuration check to pci_configure_device() (Bjorn Helgaas) - Set MPS to match upstream bridge (Keith Busch) - ARM/PCI: Set MPS before pci_bus_add_devices() (Murali Karicheri) - Add pci_scan_root_bus_msi() (Lorenzo Pieralisi) - ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() (Lorenzo Pieralisi) Resource management: - Call pci_read_bridge_bases() from core instead of arch code (Lorenzo Pieralisi) PCI device hotplug: - pciehp: Remove unused interrupt events (Bjorn Helgaas) - pciehp: Remove ignored MRL sensor interrupt events (Bjorn Helgaas) - pciehp: Handle invalid data when reading from non-existent devices (Jarod Wilson) - pciehp: Simplify pcie_poll_cmd() (Yijing Wang) - Use "slot" and "pci_slot" for struct hotplug_slot and struct pci_slot (Yijing Wang) - Protect pci_bus->slots with pci_slot_mutex, not pci_bus_sem (Yijing Wang) - Hold pci_slot_mutex while searching bus->slots list (Yijing Wang) Power management: - Disable async suspend/resume for JMicron multi-function SATA/AHCI (Zhang Rui) Virtualization: - Add ACS quirks for Intel I219-LM/V (Alex Williamson) - Restore ACS configuration as part of pci_restore_state() (Alexander Duyck) MSI: - Add pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu) - x86: Implement pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu) - Add helpers to manage pci_dev->irq and pci_dev->irq_managed (Jiang Liu) - Free legacy IRQ when enabling MSI/MSI-X (Jiang Liu) - ARM/PCI: Remove msi_controller from struct pci_sys_data (Lorenzo Pieralisi) - Remove unused pcibios_msi_controller() hook (Lorenzo Pieralisi) Generic host bridge driver: - Remove dependency on ARM-specific struct hw_pci (Jayachandran C) - Build setup-irq.o for arm64 (Jayachandran C) - Add arm64 support (Jayachandran C) APM X-Gene host bridge driver: - Add APM X-Gene PCIe 64-bit prefetchable window (Duc Dang) - Add support for a 64-bit prefetchable memory window (Duc Dang) - Drop owner assignment from platform_driver (Krzysztof Kozlowski) Broadcom iProc host bridge driver: - Allow BCMA bus driver to be built as module (Hauke Mehrtens) - Delete unnecessary checks before phy calls (Markus Elfring) - Add arm64 support (Ray Jui) Synopsys DesignWare host bridge driver: - Don't complain missing *config* reg space if va_cfg0 is set (Murali Karicheri) TI DRA7xx host bridge driver: - Disable pm_runtime on get_sync failure (Kishon Vijay Abraham I) - Add PM support (Kishon Vijay Abraham I) - Clear MSE bit during suspend so clocks will idle (Kishon Vijay Abraham I) - Add support to make GPIO drive PERST# line (Kishon Vijay Abraham I) Xilinx AXI host bridge driver: - Check for MSI interrupt flag before handling as INTx (Russell Joyce) Miscellaneous: - Fix Intersil/Techwell TW686[4589] AV capture class code (Krzysztof Hałasa) - Use PCI_CLASS_SERIAL_USB instead of bare number (Bjorn Helgaas) - Fix generic NCR 53c810 class code quirk (Bjorn Helgaas) - Fix TI816X class code quirk (Bjorn Helgaas) - Remove unused "pci_probe" flags (Bjorn Helgaas) - Host bridge driver code simplifications (Fabio Estevam) - Add dev_flags bit to access VPD through function 0 (Mark Rustad) - Add VPD function 0 quirk for Intel Ethernet devices (Mark Rustad) - Kill off set_irq_flags() usage (Rob Herring) - Remove Intel Cherrytrail D3 delays (Srinidhi Kasagar) - Clean up pci_find_capability() (Wei Yang)" * tag 'pci-v4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (72 commits) PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI PCI: Set MPS to match upstream bridge PCI: Move MPS configuration check to pci_configure_device() PCI: Drop references acquired by of_parse_phandle() PCI/MSI: Remove unused pcibios_msi_controller() hook ARM/PCI: Remove msi_controller from struct pci_sys_data ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() PCI: Add pci_scan_root_bus_msi() ARM/PCI: Replace panic with WARN messages on failures PCI: generic: Add arm64 support PCI: Build setup-irq.o for arm64 PCI: generic: Remove dependency on ARM-specific struct hw_pci PCI: imx6: Simplify a trivial if-return sequence PCI: spear: Use BUG_ON() instead of condition followed by BUG() PCI: dra7xx: Remove unneeded use of IS_ERR_VALUE() PCI: Remove pci_ats_enabled() PCI: Stop caching ATS Invalidate Queue Depth PCI: Move ATS declarations to linux/pci.h so they're all together PCI: Clean up ATS error handling PCI: Use pci_physfn() rather than looking up physfn by hand ...
2015-09-01Merge tag 'tty-4.3-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big tty/serial driver update for 4.3-rc1. Not many major things, a number of driver updates and changes, and the 8250 driver got split up a bit to make it easier to work with by moving some functions to a new file. Full details are in the shortlog. All have been in linux-next with no reported issues" * tag 'tty-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits) serial: imx: save and restore context in the suspend path serial: imx: allow waking up on RTSD serial: imx: introduce serial_imx_enable_wakeup() serial: imx: remove unbalanced clk_prepare serial: 8250: move rx_running out of the bitfield tty: serial: 8250_omap: do not use RX DMA if pause is not supported serial:8250_dw: do not alter CTS and DCTS since AFE is enabled tty: serial: men_z135_uart.c: Don't initialize port->lock tty: serial: men_z135_uart.c: Fix race between IRQ and set_termios() serial: 8250: bind to ALi Fast Infrared Controller (ALI5123) serial: 8250: don't bind to SMSC IrCC IR port serial: mxs-auart: fix baud rate range serial: mxs-auart: keep the AUART unit in reset state when not in use serial: mxs-auart: use a function name to reflect what it really does serial: 8250_pci: fix mode after S3/S4 resume for F81504/508/512 sc16is7xx: constify devtype sc16is7xx: support multiple devices sc16is7xx: save and use per-chip line number uart: pl011: Add support to ZTE ZX296702 uart uart: pl011: Improve LCRH register access decision ...
2015-08-28Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds1-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull nvdimm fixlet from Dan Williams: "This is a libnvdimm ABI fixup. I pushed back on this change quite hard given the late date, that it appears to be purely cosmetic, sysfs is not necessarily meant to be a user friendly UI, and the kernel interprets the reversed polarity of the ACPI_NFIT_MEM_ARMED flag correctly. When this flag is set, the energy source of an NVDIMM is not armed and any new writes to the DIMM may not be preserved. However, Bob Moore warned me that it is important to get these things named correctly wherever they appear otherwise we run the risk of a less than cautious firmware engineer implementing the polarity the wrong way. Once a mistake like that escapes into production platforms the flag becomes useless and we need to move to a new bit position. Bob has agreed to take a change through ACPICA to rename ACPI_NFIT_MEM_ARMED to ACPI_NFIT_MEM_NOT_ARMED, and the patch below from Toshi brings the sysfs representation of these flags in line with their respective polarities. Please pull for 4.2 as this is the first kernel to expose the ACPI NFIT sysfs representation, and this is likely a kernel that firmware developers will be using for checking out their NVDIMM enabling" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit: Clarify memory device state flags strings
2015-08-28x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WBDan Williams1-1/+2
Given that a write-back (WB) mapping plus non-temporal stores is expected to be the most efficient way to access PMEM, update the definition of ARCH_HAS_PMEM_API to imply arch support for WB-mapped-PMEM. This is needed as a pre-requisite for adding PMEM to the direct map and mapping it with struct page. The above clarification for X86_64 means that memcpy_to_pmem() is permitted to use the non-temporal arch_memcpy_to_pmem() rather than needlessly fall back to default_memcpy_to_pmem() when the pcommit instruction is not available. When arch_memcpy_to_pmem() is not guaranteed to flush writes out of cache, i.e. on older X86_32 implementations where non-temporal stores may just dirty cache, ARCH_HAS_PMEM_API is simply disabled. The default fall back for persistent memory handling remains. Namely, map it with the WT (write-through) cache-type and hope for the best. arch_has_pmem_api() is updated to only indicate whether the arch provides the proper helpers to meet the minimum "writes are visible outside the cache hierarchy after memcpy_to_pmem() + wmb_pmem()". Code that cares whether wmb_pmem() actually flushes writes to pmem must now call arch_has_wmb_pmem() directly. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> [hch: set ARCH_HAS_PMEM_API=n on x86_32] Reviewed-by: Christoph Hellwig <hch@lst.de> [toshi: x86_32 compile fixes] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-28nd_blk: change aperture mapping from WC to WBRoss Zwisler3-29/+43
This should result in a pretty sizeable performance gain for reads. For rough comparison I did some simple read testing using PMEM to compare reads of write combining (WC) mappings vs write-back (WB). This was done on a random lab machine. PMEM reads from a write combining mapping: # dd of=/dev/null if=/dev/pmem0 bs=4096 count=100000 100000+0 records in 100000+0 records out 409600000 bytes (410 MB) copied, 9.2855 s, 44.1 MB/s PMEM reads from a write-back mapping: # dd of=/dev/null if=/dev/pmem0 bs=4096 count=1000000 1000000+0 records in 1000000+0 records out 4096000000 bytes (4.1 GB) copied, 3.44034 s, 1.2 GB/s To be able to safely support a write-back aperture I needed to add support for the "read flush" _DSM flag, as outlined in the DSM spec: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf This flag tells the ND BLK driver that it needs to flush the cache lines associated with the aperture after the aperture is moved but before any new data is read. This ensures that any stale cache lines from the previous contents of the aperture will be discarded from the processor cache, and the new data will be read properly from the DIMM. We know that the cache lines are clean and will be discarded without any writeback because either a) the previous aperture operation was a read, and we never modified the contents of the aperture, or b) the previous aperture operation was a write and we must have written back the dirtied contents of the aperture to the DIMM before the I/O was completed. In order to add support for the "read flush" flag I needed to add a generic routine to invalidate cache lines, mmio_flush_range(). This is protected by the ARCH_HAS_MMIO_FLUSH Kconfig variable, and is currently only supported on x86. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-27nfit: Clarify memory device state flags stringsToshi Kani1-10/+10
ACPI 6.0 NFIT Memory Device State Flags in Table 5-129 defines NVDIMM status as follows. These bits indicate multiple info, such as failures, pending event, and capability. Bit [0] set to 1 to indicate that the previous SAVE to the Memory Device failed. Bit [1] set to 1 to indicate that the last RESTORE from the Memory Device failed. Bit [2] set to 1 to indicate that platform flush of data to Memory Device failed. As a result, the restored data content may be inconsistent even if SAVE and RESTORE do not indicate failure. Bit [3] set to 1 to indicate that the Memory Device is observed to be not armed prior to OSPM hand off. A Memory Device is considered armed if it is able to accept persistent writes. Bit [4] set to 1 to indicate that the Memory Device observed SMART and health events prior to OSPM handoff. /sys/bus/nd/devices/nmemX/nfit/flags shows this flags info. The output strings associated with the bits are "save", "restore", "smart", etc., which can be confusing as they may be interpreted as positive status, i.e. save succeeded. Change also the dev_info() message in acpi_nfit_register_dimms() to be consistent with the sysfs flags strings. Reported-by: Robert Elliott <elliott@hp.com> Signed-off-by: Toshi Kani <toshi.kani@hp.com> [ross: rename 'not_arm' to 'not_armed'] Cc: Ross Zwisler <ross.zwisler@linux.intel.com> [djbw: defer adding bit5, HEALTH_ENABLED, for now] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-27ACPI / LPSS: Ignore 10ms delay for BraswellSrinidhi Kasagar1-6/+32
LPSS devices in Braswell does not need the default 10ms d3_delay imposed by PCI specification. Removing this unnecessary delay significantly reduces the resume time approximately upto 200ms on this platform. Signed-off-by: Srinidhi Kasagar <srinidhi.kasagar@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-27ACPI, PCI: Penalize legacy IRQ used by ACPI SCIJiang Liu1-0/+16
Nick Meier reported a regression with HyperV that " After rebooting the VM, the following messages are logged in syslog when trying to load the tulip driver: tulip: Linux Tulip drivers version 1.1.15 (Feb 27, 2007) tulip: 0000:00:0a.0: PCI INT A: failed to register GSI tulip: Cannot enable tulip board #0, aborting tulip: probe of 0000:00:0a.0 failed with error -16 Errors occur in 3.19.0 kernel Works in 3.17 kernel. " According to the ACPI dump file posted by Nick at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1440072 The ACPI MADT table includes an interrupt source overridden entry for ACPI SCI: [236h 0566 1] Subtable Type : 02 <Interrupt Source Override> [237h 0567 1] Length : 0A [238h 0568 1] Bus : 00 [239h 0569 1] Source : 09 [23Ah 0570 4] Interrupt : 00000009 [23Eh 0574 2] Flags (decoded below) : 000D Polarity : 1 Trigger Mode : 3 And in DSDT table, we have _PRT method to define PCI interrupts, which eventually goes to: Name (PRSA, ResourceTemplate () { IRQ (Level, ActiveLow, Shared, ) {3,4,5,7,9,10,11,12,14,15} }) Name (PRSB, ResourceTemplate () { IRQ (Level, ActiveLow, Shared, ) {3,4,5,7,9,10,11,12,14,15} }) Name (PRSC, ResourceTemplate () { IRQ (Level, ActiveLow, Shared, ) {3,4,5,7,9,10,11,12,14,15} }) Name (PRSD, ResourceTemplate () { IRQ (Level, ActiveLow, Shared, ) {3,4,5,7,9,10,11,12,14,15} }) According to the MADT and DSDT tables, IRQ 9 may be used for: 1) ACPI SCI in level, high mode 2) PCI legacy IRQ in level, low mode So there's a conflict in polarity setting for IRQ 9. Prior to commit cd68f6bd53cf ("x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI"), ACPI SCI is handled specially and there's no check for conflicts between ACPI SCI and PCI legagy IRQ. And it seems that the HyperV hypervisor doesn't make use of the polarity configuration in IOAPIC entry, so it just works. Commit cd68f6bd53cf gets rid of the specially handling of ACPI SCI, and then the pin attribute checking code discloses the conflicts between ACPI SCI and PCI legacy IRQ on HyperV virtual machine, and rejects the request to assign IRQ9 to PCI devices. So penalize legacy IRQ used by ACPI SCI and mark it unusable if ACPI SCI attributes conflict with PCI IRQ attributes. Please refer to following links for more information: https://bugzilla.kernel.org/show_bug.cgi?id=101301 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1440072 Fixes: cd68f6bd53cf ("x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI") Reported-and-tested-by: Nick Meier <nmeier@microsoft.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: 3.19+ <stable@vger.kernel.org> # 3.19+ Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull nvdimm fix from Dan Williams: "A single fix for status register read size in the nd_blk driver. The effect of getting the width of this register read wrong is that all I/O fails when the read returns non-zero. Given the availability of ACPI 6 NFIT enabled platforms, this could reasonably wait to come in during the 4.3 merge window with a tag for 4.2-stable. Otherwise, this makes the 4.2 kernel fully functional with devices that conform to the mmio-block-apertures defined in the ACPI 6 NFIT (NVDIMM Firmware Interface Table)" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit, nd_blk: BLK status register is only 32 bits
2015-08-26device property: attach 'else if' to the proper 'if'Andy Shevchenko1-2/+3
Obviously in the current place the 'else' keyword is redundant, though it seems quite correct when we check if nval is in allowed range. Reattach the condition branch there. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26nfit, nd_blk: BLK status register is only 32 bitsRoss Zwisler1-2/+2
Only read 32 bits for the BLK status register in read_blk_stat(). The format and size of this register is defined in the "NVDIMM Driver Writer's guide": http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdf Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Tested-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-26ACPICA: Debugger: Cleanup debugging outputs to dump name path without ↵Lv Zheng4-4/+4
trailing underscores ACPICA commit 51a49c2fb4a73f302a6df2b8ddc1350dd261684d It is better to use unified ASL path name to interact with the developers. There are following acpi_ns_build_normalized_pathname() users invoking it for debugging purposes (acpiexec test results are attached): 1. acpi_ut_display_init_pathname (acpi_ns_handle_to_pathname): --------------------------------------------- Initializing Region \_SB.H_EC.ECF2 --------------------------------------------- 2. acpi_ns_print_node_pathname (acpi_ns_handle_to_pathname): --------------------------------------------- - ex \_SB.H_EC._STA Evaluating \_SB.H_EC._STA --------------------------------------------- 3. acpi_ds_print_node_pathname (acpi_ns_handle_to_pathname): --------------------------------------------- - level 211b console - execute \M1 ... **** Exception AE_AML_UNINITIALIZED_ARG during execution of method [\M1] (Node 009CB6B8) --------------------------------------------- 4. acpi_ex_dump_reference_obj (acpi_ns_handle_to_pathname): --------------------------------------------- - dump \_TZ.FAN4._PR0 ... [00] 00835E98 [Object Reference] Type [Named Object] 05 00828878 \_TZ.FN04 --------------------------------------------- 5. acpi_db_bus_walk (acpi_ns_handle_to_pathname): --------------------------------------------- - businfo \_SB.PCI0 Type 6 ... --------------------------------------------- 6. acpi_db_walk_and_match_name (acpi_ns_handle_to_pathname): --------------------------------------------- - find _PR0 \_TZ.FAN4._PR0 Package 002D8DF8 01 Elements 01 --------------------------------------------- 7. acpi_db_walk_for_specific_objects (acpi_ns_handle_to_pathname): --------------------------------------------- - methods ... \_SB.PCI0._PRT Method 0026D918 01 Args 0 Len 0005 Aml 0026B199 ... --------------------------------------------- 8. acpi_db_decode_and_dispaly_object (acpi_get_name): --------------------------------------------- - gpes Block 0 - Info 003AC7B0 device_node 003A0E08 [\_GPE] - FADT-defined GPE block ... --------------------------------------------- 9. acpi_db_display_gpes (acpi_get_name): --------------------------------------------- - dump \_GPE Object (003A0E08) Pathname: \_GPE --------------------------------------------- 10.ae_miscellaneous_tests (acpi_get_name): No output available This patch cleans up all of the above usages. ACPICA BZ 1178, Lv Zheng. Linux kernel's ACPICA debugging messages may also be changed. Link: https://github.com/acpica/acpica/commit/51a49c2f Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26ACPICA: Disassembler: Cleanup acpi_gbl_db_opt_verbose acpiexec usageLv Zheng2-4/+1
ACPICA commit 42d7ad7bfb1cfb95183c1386c77509f2036f521d When acpi_gbl_db_opt_verbose is used in acpi_dm_descending_op() (invoked by acpi_dm_disassemble()), it is actually exported by the disassembler but used by the debugger to distinguish the output of the disassembler for different debugger commands. It is by default TRUE but is set to FALSE for control method disassembly command - "disassemble". So it's initialization should be a part of the ACPI_DISASSEMBLER conditioned code. This patch uses ACPI_INIT_GLOBAL to achieve a clean manner so that when ACPI_DISASSEMBLER is not defined, ACPI_DEBUGGER conditioned code needn't link to this option. Since it is a disassembler exported variable, it is renamed to acpi_gbl_dm_opt_Verbose in this patch. As VERBOSE_PRINT() macro has only one user, this patch also removes the definition of this macro. Lv Zheng. This patch doesn't affect Linux kernel. Link: https://github.com/acpica/acpica/commit/42d7ad7b Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26ACPICA: Disassembler: Cleanup acpi_gbl_db_opt_disasmLv Zheng1-1/+1
ACPICA commit 969989cf7f85e2a2a0cd048cd25fc706246a48a2 This patch cleans up the following global variable - acpi_gbl_db_opt_disasm: The setting is used to control the full disassembly feature for iasl. ACPI debugger (acpiexec) shall have nothing to do with it. Actually, acpiexec never links to ad_aml_disassemble(). This patch thus renames this global option to acpi_gbl_dm_opt_disasm and removes all acpiexec and debugger references on it. Lv Zheng. This patch doesn't affect Linux kernel. Link: https://github.com/acpica/acpica/commit/969989cf Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26ACPICA: Debugger: Split debugger initialization/termination APIsLv Zheng3-22/+0
ACPICA commit 7a3f22baab000b186779dac64ad71d9776b8f432 It is likely that the debugger is enabled only when a userspace program explicitly tells a kernel to do so, so it shouldn't be initialized as early as current implementation. The only tool requiring ACPI_DEBUGGER is acpiexec, so acpiexec need to call the new APIs by itself. And BSD developers may also get notified to invoke the APIs for DDB enabling. Lv Zheng. This patch doesn't affect Linux kernel as debugger is currently not enabled in the Linux kernel. Link: https://github.com/acpica/acpica/commit/7a3f22ba Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26ACPICA: Make the max-number-of-loops runtime configurableBob Moore3-1/+6
ACPICA commit a9d9c2d0c2d077bb3175ec9c252cf0e5da3efd45 Was previously compile-time only. Add support option for acpiexec. Link: https://github.com/acpica/acpica/commit/a9d9c2d0 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26ACPICA: Debugger: Add option to display namespace summary/countsBob Moore2-2/+6
ACPICA commit bba222c15c2ce79076eb3a5e9d4d5f7120db8a00 If "Objects" command is invoked with no arguments, the counts for each object type are displayed. Linux kernel is not affected by this commit as currently debugger is not enabled in the Linux kernel. Link: https://github.com/acpica/acpica/commit/bba222c1 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26ACPICA: Add additional debug info/statementsBob Moore5-6/+57
ACPICA commit 74094ca9f51e2652a9b5f01722d8640a653cc75a For _REG methods and module-level code blocks. For acpiexec, add deletion of module-level blocks in case of an early abort. Link: https://github.com/acpica/acpica/commit/74094ca9 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26ACPICA: Table handling: Cleanup and update debug output for toolsBob Moore2-34/+30
ACPICA commit 93862bd7a227543bc617d822ef5c4f8a5d68b519 Add output of table OEM ID along with signature to support lots of SSDTs. Cleanup use of table pointers. Link: https://github.com/acpica/acpica/commit/93862bd7 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26ACPICA: acpiexec/acpinames: Support very large number of ACPI tablesBob Moore3-6/+18
ACPICA commit ca3bd4c5cdc39a9009280032adbbc20f34e94c47 Fix a couple of issues with >40 ACPI tables. Return exit error for acpinames to enable use with BIOS builds. The new exported function is used by acpinames. For Linux kernel, this change is a no-op. Link: https://github.com/acpica/acpica/commit/ca3bd4c5 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26ACPICA: acpinames: Add new options and wildcard supportBob Moore2-2/+2
ACPICA commit 0ecf5b5a41c3d2e09af48f0fdbc9ae784f631788 - Add wilcard support for input filenames. - Add -l option to load tables and exit, no display. This is useful for validation of the namespace during BIOS generation. - Add -x option for specifying debug level. Linux kernel is not affected by this commit. Link: https://github.com/acpica/acpica/commit/0ecf5b5a Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26ACPICA: Tables: Cleanup to reduce FACS globalsLv Zheng3-19/+7
ACPICA commit 3f42ba76e2a0453976d3108296d5f656fdf2bd6e In this patch, FACS table mapping is also tuned a bit so that only the selected FACS table will be mapped by the OSPM (mapped on demand) and the FACS related global variables can be reduced. Lv Zheng. Link: https://github.com/acpica/acpica/commit/3f42ba76 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26ACPICA: Tables: Fix global table list issues by removing fixed table indexesLv Zheng7-58/+51
ACPICA commit c0b38b4c3982c2336ee92a2a14716107248bd941 The fixed table indexes leave holes in the global table list: 1. One hole can be seen when there is only 1 FACS provided by the BIOS. 2. Tow holes can be seen when it is a reduced hardware platform. The holes do not break OSPMs but have broken ACPI debugger "tables" command. Also the "fixed table indexes" mechanism may make the descriptors of the standard tables installed earlier than DSDT to be overwritten by the descriptors of the fixed tables. For example, FACP disappears from the global table list after DSDT is installed. This patch fixes all above issues by removing the "fixed table indexes" mechanism which is too complicated to be maintained in a regression safe manner. After removal, the table loader will determine the indexes of the fixed tables. Lv Zheng. Link: https://github.com/acpica/acpica/commit/c0b38b4c Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26ACPICA: Update info messages during ACPICA initBob Moore2-2/+11
ACPICA commit 4ccf8a1cc499ec8f00345f662a5887483980e1dd Small cleanup of messages. Link: https://github.com/acpica/acpica/commit/4ccf8a1c Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26ACPICA: Disassembler: Update for new listing modeBob Moore1-1/+1
ACPICA commit 2ed09bb7619d25f5a5c065c33a8a775a6db3a856 ACPICA commit 2fefacf73825b0ec96bbfc4f70a256735b715d6c This mode emits AML code along with the ASL code. A new global was needed to ensure the listing mode is completely separate from the debugger verbose mode. Emits the correct AML offset for the AML code. The -l option now works for both the compiler and disassembler. Linux kernel is not affected by this commit. Link: https://github.com/acpica/acpica/commit/2fefacf7 Link: https://github.com/acpica/acpica/commit/2ed09bb7 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26ACPICA: Update parameter validation for data_table_region and load_tableBob Moore5-20/+69
ACPICA commit 51ab555e60b4a3de3cc4a846e86d0de255be441a Add additional validation for the table signature and the OEM strings. Eliminates buffer read overrun in data_table_region. ACPICA BZ 1184. Link: https://bugs.acpica.org/show_bug.cgi?id=1184 Link: https://github.com/acpica/acpica/commit/51ab555e Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26ACPICA: Disassembler: Remove duplicate code in _PLD processing.Bob Moore1-2/+3
ACPICA commit 6d9c827b540837b6e54059e17756a06985e4a196 ACPICA BZ 1176. Link: https://bugs.acpica.org/show_bug.cgi?id=1176 Link: https://github.com/acpica/acpica/commit/6d9c827b Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-26ACPICA: Correctly cleanup after a ACPI table load failureBob Moore5-10/+54
ACPICA commit ed7769e832de6c7ba90615480d916c85fd100422 If a table load fails, delete all namespace objects created by the table, otherwise these objects will be uninitialized, causing problems later. This appears to be a very rare problem. Also handle the unitialized node problem to prevent possible faults. ACPICA BZ 1185. Link: https://github.com/acpica/acpica/commit/ed7769e8 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPI: Decouple ACPI idle and ACPI processor driversAshwin Chaugule2-2/+7
This patch introduces a new Kconfig symbol, ACPI_PROCESSOR_IDLE, which is auto selected by architectures which support the ACPI based C states for CPU Idle management. The processor_idle driver in its present form contains declarations specific to X86 and IA64. Since there are no reasonable defaults for other architectures e.g. ARM64, the driver is selected only for X86 or IA64. This helps in decoupling the ACPI processor_driver from the ACPI processor_idle driver which is useful for the upcoming alternative patchwork for controlling CPU Performance (CPPC) and CPU Idle (LPI). Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPI: Split out ACPI PSS from ACPI Processor driverAshwin Chaugule3-36/+70
The ACPI processor driver is currently tied too closely to the ACPI P-states (PSS) and other related constructs for controlling CPU performance. The newer ACPI specification (v5.1 onwards) introduces alternative methods to PSS. These new mechanisms are described within each ACPI Processor object and so they need to be scanned whenever a new Processor object is detected. This patch introduces a new Kconfig symbol to allow for finer configurability among the two options for controlling performance states. There is no change in functionality and the option is auto-selected by the architectures which support it. A future commit will introduce support for CPPC: A newer method of controlling CPU performance. The OS is not expected to support CPPC and PSS at the same time, so the Kconfig option lets us make the two mutually exclusive at compile time. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPI / osl: replace custom implementation of readq / writeqAndy Shevchenko1-30/+3
The readq() and writeq() helpers are available in the asm-generic/io-64-nonatomic-hi-lo.h and asm-generic/io-64-nonatomic-lo-hi.h headers. Replace custom implementation by the generic helpers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPI / EC: Fix an issue caused by the serialized _Qxx evaluationsLv Zheng1-22/+60
It is proven that Windows evaluates _Qxx handlers in a parallel way. This patch follows this fact, splits _Qxx evaluations from the NOTIFY queue to form a separate queue, so that _Qxx evaluations can be queued up on different CPUs rather than being queued up on a CPU0 bound queue. Event handling related callbacks are also renamed and sorted in this patch. Link: https://bugzilla.kernel.org/show_bug.cgi?id=94411 Reported-and-tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-15serial: 8250: bind to ALi Fast Infrared Controller (ALI5123)Maciej S. Szmigiero1-0/+1
This way this device can be used with irtty-sir - at least on Toshiba Satellite A20-S103 it is not configured by default and needs PNP activation before it starts to respond on I/O ports. This device has actually its own driver (ali-ircc), but this driver seems to be non-functional for a very long time (see http://permalink.gmane.org/gmane.linux.irda.general/484 http://permalink.gmane.org/gmane.network.protocols.obex.openobex.user/943 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=535070 ). Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>