summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)AuthorFilesLines
2020-02-28Merge tag 'acpi-5.6-rc4' of ↵Linus Torvalds1-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "Fix a couple of configuration issues in the ACPI watchdog (WDAT) driver (Mika Westerberg) and make it possible to disable that driver at boot time in case it still does not work as expected (Jean Delvare)" * tag 'acpi-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: watchdog: Set default timeout in probe ACPI: watchdog: Fix gas->access_width usage ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro ACPI: watchdog: Allow disabling WDAT at boot
2020-02-21ACPI: PM: s2idle: Check fixed wakeup events in acpi_s2idle_wake()Rafael J. Wysocki2-0/+52
Commit fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") overlooked the fact that fixed events can wake up the system too and broke RTC wakeup from suspend-to-idle as a result. Fix this issue by checking the fixed events in acpi_s2idle_wake() in addition to checking wakeup GPEs and break out of the suspend-to-idle loop if the status bits of any enabled fixed events are set then. Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-14ACPI: watchdog: Fix gas->access_width usageMika Westerberg1-2/+1
ACPI Generic Address Structure (GAS) access_width field is not in bytes as the driver seems to expect in few places so fix this by using the newly introduced macro ACPI_ACCESS_BYTE_WIDTH(). Fixes: b1abf6fc4982 ("ACPI / watchdog: Fix off-by-one error at resource assignment") Fixes: 058dfc767008 ("ACPI / watchdog: Add support for WDAT hardware watchdog") Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-12ACPI: PM: s2idle: Prevent spurious SCIs from waking up the systemRafael J. Wysocki1-3/+9
If the platform triggers a spurious SCI even though the status bit is not set for any GPE when the system is suspended to idle, it will be treated as a genuine wakeup, so avoid that by checking if any GPEs are active at all before returning 'true' from acpi_s2idle_wake(). Link: https://bugzilla.kernel.org/show_bug.cgi?id=206413 Fixes: 56b991849009 ("PM: sleep: Simplify suspend-to-idle control flow") Reported-by: Tsuchiya Yuto <kitakar@gmail.com> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-12ACPICA: Introduce acpi_any_gpe_status_set()Rafael J. Wysocki3-0/+105
Introduce a new helper function, acpi_any_gpe_status_set(), for checking the status bits of all enabled GPEs in one go. It is needed to distinguish spurious SCIs from genuine ones when deciding whether or not to wake up the system from suspend-to-idle. Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-11ACPI: PM: s2idle: Avoid possible race related to the EC GPERafael J. Wysocki1-13/+31
It is theoretically possible for the ACPI EC GPE to be set after the s2idle_ops->wake() called from s2idle_loop() has returned and before the subsequent pm_wakeup_pending() check is carried out. If that happens, the resulting wakeup event will cause the system to resume even though it may be a spurious one. To avoid that race, first make the ->wake() callback in struct platform_s2idle_ops return a bool value indicating whether or not to let the system resume and rearrange s2idle_loop() to use that value instad of the direct pm_wakeup_pending() call if ->wake() is present. Next, rework acpi_s2idle_wake() to process EC events and check pm_wakeup_pending() before re-arming the SCI for system wakeup to prevent it from triggering prematurely and add comments to that function to explain the rationale for the new code flow. Fixes: 56b991849009 ("PM: sleep: Simplify suspend-to-idle control flow") Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-11ACPI: EC: Fix flushing of pending workRafael J. Wysocki1-18/+26
Commit 016b87ca5c8c ("ACPI: EC: Rework flushing of pending work") introduced a subtle bug into the flushing of pending EC work while suspended to idle, which may cause the EC driver to fail to re-enable the EC GPE after handling a non-wakeup event (like a battery status change event, for example). The problem is that the work item flushed by flush_scheduled_work() in __acpi_ec_flush_work() may disable the EC GPE and schedule another work item expected to re-enable it, but that new work item is not flushed, so __acpi_ec_flush_work() returns with the EC GPE disabled and the CPU running it goes into an idle state subsequently. If all of the other CPUs are in idle states at that point, the EC GPE won't be re-enabled until at least one CPU is woken up by another interrupt source, so system wakeup events that would normally come from the EC then don't work. This is reproducible on a Dell XPS13 9360 in my office which sometimes stops reacting to power button and lid events (triggered by the EC on that machine) after switching from AC power to battery power or vice versa while suspended to idle (each of those switches causes the EC GPE to trigger for several times in a row, but they are not system wakeup events). To avoid this problem, it is necessary to drain the workqueue entirely in __acpi_ec_flush_work(), but that cannot be done with respect to system_wq, because work items may be added to it from other places while __acpi_ec_flush_work() is running. For this reason, make the EC driver use a dedicated workqueue for EC events processing (let that workqueue be ordered so that EC events are processed sequentially) and use drain_workqueue() on it in __acpi_ec_flush_work(). Fixes: 016b87ca5c8c ("ACPI: EC: Rework flushing of pending work") Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-10ACPI: watchdog: Allow disabling WDAT at bootJean Delvare1-1/+11
In case the WDAT interface is broken, give the user an option to ignore it to let a native driver bind to the watchdog device instead. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-07Merge tag 'acpi-5.6-rc1-3' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "Add Hisilicon Hip08-Lite I2C controller clock frequency support to the ACPI driver for AMD SoCs (APD) and to the Designware I2C driver (Hanjun Guo)" * tag 'acpi-5.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: i2c: designware: Add ACPI HID for Hisilicon Hip08-Lite I2C controller ACPI / APD: Add clock frequency for Hisilicon Hip08-Lite I2C controller
2020-02-05Merge tag 'iommu-updates-v5.6' of ↵Linus Torvalds1-2/+20
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Allow compiling the ARM-SMMU drivers as modules. - Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code collected by Will Deacon. The merge-commit (6855d1ba7537) has all the details. - Cleanup of the iommu_put_resv_regions() call-backs in various drivers. - AMD IOMMU driver cleanups. - Update for the x2APIC support in the AMD IOMMU driver. - Preparation patches for Intel VT-d nested mode support. - RMRR and identity domain handling fixes for the Intel VT-d driver. - More small fixes and cleanups. * tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits) iommu/amd: Remove the unnecessary assignment iommu/vt-d: Remove unnecessary WARN_ON_ONCE() iommu/vt-d: Unnecessary to handle default identity domain iommu/vt-d: Allow devices with RMRRs to use identity domain iommu/vt-d: Add RMRR base and end addresses sanity check iommu/vt-d: Mark firmware tainted if RMRR fails sanity check iommu/amd: Remove unused struct member iommu/amd: Replace two consecutive readl calls with one readq iommu/vt-d: Don't reject Host Bridge due to scope mismatch PCI/ATS: Add PASID stubs iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device iommu/arm-smmu-v3: Improve add_device() error handling iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE iommu/arm-smmu-v3: Add second level of context descriptor table iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure iommu/arm-smmu-v3: Propagate ssid_bits iommu/arm-smmu-v3: Add support for Substream IDs iommu/arm-smmu-v3: Add context descriptor tables allocators iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support ACPI/IORT: Parse SSID property of named component node ...
2020-02-04treewide: remove redundant IS_ERR() before error code checkMasahiro Yamada1-1/+1
'PTR_ERR(p) == -E*' is a stronger condition than IS_ERR(p). Hence, IS_ERR(p) is unneeded. The semantic patch that generates this commit is as follows: // <smpl> @@ expression ptr; constant error_code; @@ -IS_ERR(ptr) && (PTR_ERR(ptr) == - error_code) +PTR_ERR(ptr) == - error_code // </smpl> Link: http://lkml.kernel.org/r/20200106045833.1725-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Stephen Boyd <sboyd@kernel.org> [drivers/clk/clk.c] Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [GPIO] Acked-by: Wolfram Sang <wsa@the-dreams.de> [drivers/i2c] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [acpi/scan.c] Acked-by: Rob Herring <robh@kernel.org> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan2-16/+14
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-03ACPI / APD: Add clock frequency for Hisilicon Hip08-Lite I2C controllerHanjun Guo1-0/+6
I2C clock frequency of Designware ip for Hisilicon Hip08 Lite is 125M, use a new ACPI HID to enable it. Tested-by: Sheng Feng <fengsheng5@huawei.com> Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-31Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-16/+18
Pull updates from Andrew Morton: "Most of -mm and quite a number of other subsystems: hotfixes, scripts, ocfs2, misc, lib, binfmt, init, reiserfs, exec, dma-mapping, kcov. MM is fairly quiet this time. Holidays, I assume" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits) kcov: ignore fault-inject and stacktrace include/linux/io-mapping.h-mapping: use PHYS_PFN() macro in io_mapping_map_atomic_wc() execve: warn if process starts with executable stack reiserfs: prevent NULL pointer dereference in reiserfs_insert_item() init/main.c: fix misleading "This architecture does not have kernel memory protection" message init/main.c: fix quoted value handling in unknown_bootoption init/main.c: remove unnecessary repair_env_string in do_initcall_level init/main.c: log arguments and environment passed to init fs/binfmt_elf.c: coredump: allow process with empty address space to coredump fs/binfmt_elf.c: coredump: delete duplicated overflow check fs/binfmt_elf.c: coredump: allocate core ELF header on stack fs/binfmt_elf.c: make BAD_ADDR() unlikely fs/binfmt_elf.c: better codegen around current->mm fs/binfmt_elf.c: don't copy ELF header around fs/binfmt_elf.c: fix ->start_code calculation fs/binfmt_elf.c: smaller code generation around auxv vector fill lib/find_bit.c: uninline helper _find_next_bit() lib/find_bit.c: join _find_next_bit{_le} uapi: rename ext2_swab() to swab() and share globally in swab.h lib/scatterlist.c: adjust indentation in __sg_alloc_table ...
2020-01-31ACPI: thermal: switch to use <linux/units.h> helpersAkinobu Mita1-16/+18
This switches the ACPI thermal zone driver to use celsius_to_deci_kelvin(), deci_kelvin_to_celsius(), and deci_kelvin_to_millicelsius_with_offset() in <linux/units.h> instead of helpers in <linux/thermal.h>. This is preparation for centralizing the kelvin to/from Celsius conversion helpers in <linux/units.h>. Link: http://lkml.kernel.org/r/1576386975-7941-3-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Sujith Thomas <sujith.thomas@intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-30Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-8/+3
Pull drm updates from Davbe Airlie: "This is the main pull request for graphics for 5.6. Usual selection of changes all over. I've got one outstanding vmwgfx pull that touches mm so kept it separate until after all of this lands. I'll try and get it to you soon after this, but it might be early next week (nothing wrong with code, just my schedule is messy) This also hits a lot of fbdev drivers with some cleanups. Other notables: - vulkan timeline semaphore support added to syncobjs - nouveau turing secureboot/graphics support - Displayport MST display stream compression support Detailed summary: uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes" * tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits) drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing drm/nouveau/acr: return error when registering LSF if ACR not supported drm/nouveau/disp/gv100-: not all channel types support reporting error codes drm/nouveau/disp/nv50-: prevent oops when no channel method map provided drm/nouveau: support synchronous pushbuf submission drm/nouveau: signal pending fences when channel has been killed drm/nouveau: reject attempts to submit to dead channels drm/nouveau: zero vma pointer even if we only unreference it rather than free drm/nouveau: Add HD-audio component notifier support drm/nouveau: fix build error without CONFIG_IOMMU_API drm/nouveau/kms/nv04: remove set but not used variable 'width' drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector' drm/nouveau/mmu: fix comptag memory leak drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping drm/exynos: Rename Exynos to lowercase drm/exynos: change callback names drm/mst: Don't do atomic checks over disabled managers drm/amdgpu: add the lost mutex_init back drm/amd/display: skip opp blank or unblank if test pattern enabled ...
2020-01-28Merge branch 'core-headers-for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull header cleanup from Ingo Molnar: "This is a treewide cleanup, mostly (but not exclusively) with x86 impact, which breaks implicit dependencies on the asm/realtime.h header and finally removes it from asm/acpi.h" * 'core-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ACPI/sleep: Move acpi_get_wakeup_address() into sleep.c, remove <asm/realmode.h> from <asm/acpi.h> ACPI/sleep: Convert acpi_wakeup_address into a function x86/ACPI/sleep: Remove an unnecessary include of asm/realmode.h ASoC: Intel: Skylake: Explicitly include linux/io.h for virt_to_phys() vmw_balloon: Explicitly include linux/io.h for virt_to_phys() virt: vbox: Explicitly include linux/io.h to pick up various defs efi/capsule-loader: Explicitly include linux/io.h for page_to_phys() perf/x86/intel: Explicitly include asm/io.h to use virt_to_phys() x86/kprobes: Explicitly include vmalloc.h for set_vm_flush_reset_perms() x86/ftrace: Explicitly include vmalloc.h for set_vm_flush_reset_perms() x86/boot: Explicitly include realmode.h to handle RM reservations x86/efi: Explicitly include realmode.h to handle RM trampoline quirk x86/platform/intel/quark: Explicitly include linux/io.h for virt_to_phys() x86/setup: Enhance the comments x86/setup: Clean up the header portion of setup.c
2020-01-28Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds1-1/+1
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-27Merge tag 'acpi-5.6-rc1' of ↵Linus Torvalds154-203/+390
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to the most recent upstream revision (20200110), add new hardware support to a handful of ACPI drivers, make the ACPI fan driver expose power states information for fans, add some more quirks, fix bugs and clean up assorted things. Specifics: - Update the ACPICA code in the kernel to upstream revision 20200110 including: - Update of copyright notices to 2020 (Bob Moore). - Dispatcher fix to always generate buffer objects for the ASL create_field() operator (Maximilian Luz). - Debugger cleanup (Colin Ian King). - Disassembler change to create buffer fields in ACPI_PARSE_LOAD_PASS1 (Erik Kaneda). - UNIX line ending support for non-windows builds in acpisrc (Erik Kaneda). - Update the list of ACPICA maintainers (Rafael Wysocki). - Add Intel Tiger Lake ACPI device IDs to the ACPI DPTF, ACPI fan, int340x_thermal and intel-hid drivers (Gayatri Kammela). - Make the ACPI fan driver create additional sysfs attributes to expose power states information for fans (Srinivas Pandruvada). - Fix up the ACPI battery driver to deal with unexpected battery capacity information in a better way (Hans de Goede). - Add ACPI backlight quirks for Lenovo E41-25/45 and MSI MS-7721 boards (Aaron Ma, Hans de Goede). - Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch to the ACPI button driver (Jason Ekstrand). - Drop TIMER_DEFERRABLE from the GHES polling mode timer function flags to make it run precisely at the configured time (Bhaskar Upadhaya). - Fix race condition related to the reference counting of query handlers in the ACPI EC driver (Rafael Wysocki). - Fix ACPI tools build issue (Zhengyuan Liu). - Replace dma_request_slave_channel() with dma_request_chan() in the firmware guide documentation for ACPI (Peter Ujfalusi). - Fix typo in a comment and clean up function parameter data type inconsistencies (Kacper Piwiński, Tian Tao)" * tag 'acpi-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits) ACPICA: Update version to 20200110 ACPICA: All acpica: Update copyrights to 2020 Including tool signons. apei/ghes: Do not delay GHES polling ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch ACPI: PPTT: Consistently use unsigned int as parameter type ACPI: EC: Reference count query handlers under lock ACPICA: Update the list of maintainers ACPICA: Update version to 20191213 ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator ACPICA: acpisrc: add unix line ending support for non-windows build ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1 ACPICA: debugger: fix spelling mistake "adress" -> "address" ACPI: video: Do not export a non working backlight interface on MSI MS-7721 boards docs: firmware-guide: ACPI: Replace dma_request_slave_channel() with dma_request_chan() thermal: int340x_thermal: Add Tiger Lake ACPI device IDs platform/x86: intel-hid: Add Tiger Lake ACPI device ID ACPI: fan: Add Tiger Lake ACPI device ID ACPI: DPTF: Add Tiger Lake ACPI device IDs ACPI: fan: Expose fan performance state information tools/power/acpi: fix compilation error ...
2020-01-27Merge tag 'pm-5.6-rc1' of ↵Linus Torvalds3-159/+198
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add ACPI support to the intel_idle driver along with an admin guide document for it, add support for CPR (Core Power Reduction) to the AVS (Adaptive Voltage Scaling) subsystem, add new hardware support in a few places, add some new sysfs attributes, debugfs files and tracepoints, fix bugs and clean up a bunch of things all over. Specifics: - Update the ACPI processor driver in order to export acpi_processor_evaluate_cst() to the code outside of it, add ACPI support to the intel_idle driver based on that and clean up that driver somewhat (Rafael Wysocki). - Add an admin guide document for the intel_idle driver (Rafael Wysocki). - Clean up cpuidle core and drivers, enable compilation testing for some of them (Benjamin Gaignard, Krzysztof Kozlowski, Rafael Wysocki, Yangtao Li). - Fix reference counting of OPP (operating performance points) table structures (Viresh Kumar). - Add support for CPR (Core Power Reduction) to the AVS (Adaptive Voltage Scaling) subsystem (Niklas Cassel, Colin Ian King, YueHaibing). - Add support for TigerLake Mobile and JasperLake to the Intel RAPL power capping driver (Zhang Rui). - Update cpufreq drivers: - Add i.MX8MP support to imx-cpufreq-dt (Anson Huang). - Fix usage of a macro in loongson2_cpufreq (Alexandre Oliva). - Fix cpufreq policy reference counting issues in s3c and brcmstb-avs (chenqiwu). - Fix ACPI table reference counting issue and HiSilicon quirk handling in the CPPC driver (Hanjun Guo). - Clean up spelling mistake in intel_pstate (Harry Pan). - Convert the kirkwood and tegra186 drivers to using devm_platform_ioremap_resource() (Yangtao Li). - Update devfreq core: - Add 'name' sysfs attribute for devfreq devices (Chanwoo Choi). - Clean up the handing of transition statistics and allow them to be reset by writing 0 to the 'trans_stat' devfreq device attribute in sysfs (Kamil Konieczny). - Add 'devfreq_summary' to debugfs (Chanwoo Choi). - Clean up kerneldoc comments and Kconfig indentation (Krzysztof Kozlowski, Randy Dunlap). - Update devfreq drivers: - Add dynamic scaling for the imx8m DDR controller and clean up imx8m-ddrc (Leonard Crestez, YueHaibing). - Fix DT node reference counting and nitialization error code path in rk3399_dmc and add COMPILE_TEST and HAVE_ARM_SMCCC dependency for it (Chanwoo Choi, Yangtao Li). - Fix DT node reference counting in rockchip-dfi and make it use devm_platform_ioremap_resource() (Yangtao Li). - Fix excessive stack usage in exynos-ppmu (Arnd Bergmann). - Fix initialization error code paths in exynos-bus (Yangtao Li). - Clean up exynos-bus and exynos somewhat (Artur Świgoń, Krzysztof Kozlowski). - Add tracepoints for tracking usage_count updates unrelated to status changes in PM-runtime (Michał Mirosław). - Add sysfs attribute to control the "sync on suspend" behavior during system-wide suspend (Jonas Meurer). - Switch system-wide suspend tests over to 64-bit time (Alexandre Belloni). - Make wakeup sources statistics in debugfs cover deleted ones which used to be the case some time ago (zhuguangqing). - Clean up computations carried out during hibernation, update messages related to hibernation and fix a spelling mistake in one of them (Wen Yang, Luigi Semenzato, Colin Ian King). - Add mailmap entry for maintainer e-mail address that has not been functional for several years (Rafael Wysocki)" * tag 'pm-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits) cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG intel_idle: Clean up irtl_2_usec() intel_idle: Move 3 functions closer to their callers intel_idle: Annotate initialization code and data structures intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit() intel_idle: Rearrange intel_idle_cpuidle_driver_init() intel_idle: Clean up NULL pointer check in intel_idle_init() intel_idle: Fold intel_idle_probe() into intel_idle_init() intel_idle: Eliminate __setup_broadcast_timer() cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings cpuidle: sysfs: fix warnings when compiling with W=1 cpuidle: coupled: fix warnings when compiling with W=1 cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior PM / devfreq: Add debugfs support with devfreq_summary file Documentation: admin-guide: PM: Add intel_idle document cpuidle: arm: Enable compile testing for some of drivers PM-runtime: add tracepoints for usage_count changes cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether" PM: hibernate: fix spelling mistake "shapshot" -> "snapshot" ...
2020-01-27Merge branches 'acpi-tables', 'acpi-button', 'acpi-ec', 'acpi-doc' and ↵Rafael J. Wysocki3-26/+30
'acpi-tools' * acpi-tables: ACPI: PPTT: Consistently use unsigned int as parameter type * acpi-button: ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch * acpi-ec: ACPI: EC: Reference count query handlers under lock * acpi-doc: docs: firmware-guide: ACPI: Replace dma_request_slave_channel() with dma_request_chan() * acpi-tools: tools/power/acpi: fix compilation error
2020-01-27Merge branches 'acpi-battery', 'acpi-video', 'acpi-fan' and 'acpi-drivers'Rafael J. Wysocki7-28/+181
* acpi-battery: ACPI / battery: Deal better with neither design nor full capacity not being reported ACPI / battery: Use design-cap for capacity calculations if full-cap is not available ACPI / battery: Deal with design or full capacity being reported as -1 * acpi-video: ACPI: video: Do not export a non working backlight interface on MSI MS-7721 boards ACPI: video: Use native backlight on Lenovo E41-25/45 ACPI: video: fix typo in comment * acpi-fan: ACPI: fan: Expose fan performance state information * acpi-drivers: thermal: int340x_thermal: Add Tiger Lake ACPI device IDs platform/x86: intel-hid: Add Tiger Lake ACPI device ID ACPI: fan: Add Tiger Lake ACPI device ID ACPI: DPTF: Add Tiger Lake ACPI device IDs
2020-01-27Merge branch 'acpica'Rafael J. Wysocki143-148/+178
* acpica: ACPICA: Update version to 20200110 ACPICA: All acpica: Update copyrights to 2020 Including tool signons. ACPICA: Update the list of maintainers ACPICA: Update version to 20191213 ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator ACPICA: acpisrc: add unix line ending support for non-windows build ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1 ACPICA: debugger: fix spelling mistake "adress" -> "address"
2020-01-17ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map()Hanjun Guo1-2/+55
The IORT specification [0] (Section 3, table 4, page 9) defines the 'Number of IDs' as 'The number of IDs in the range minus one'. However, the IORT ID mapping function iort_id_map() treats the 'Number of IDs' field as if it were the full IDs mapping count, with the following check in place to detect out of boundary input IDs: InputID >= Input base + Number of IDs This check is flawed in that it considers the 'Number of IDs' field as the full number of IDs mapping and disregards the 'minus one' from the IDs count. The correct check in iort_id_map() should be implemented as: InputID > Input base + Number of IDs this implements the specification correctly but unfortunately it breaks existing firmwares that erroneously set the 'Number of IDs' as the full IDs mapping count rather than IDs mapping count minus one. e.g. PCI hostbridge mapping entry 1: Input base: 0x1000 ID Count: 0x100 Output base: 0x1000 Output reference: 0xC4 //ITS reference PCI hostbridge mapping entry 2: Input base: 0x1100 ID Count: 0x100 Output base: 0x2000 Output reference: 0xD4 //ITS reference Two mapping entries which the second entry's Input base = the first entry's Input base + ID count, so for InputID 0x1100 and with the correct InputID check in place in iort_id_map() the kernel would map the InputID to ITS 0xC4 not 0xD4 as it would be expected. Therefore, to keep supporting existing flawed firmwares, introduce a workaround that instructs the kernel to use the old InputID range check logic in iort_id_map(), so that we can support both firmwares written with the flawed 'Number of IDs' logic and the correct one as defined in the specifications. [0]: http://infocenter.arm.com/help/topic/com.arm.doc.den0049d/DEN0049D_IO_Remapping_Table.pdf Reported-by: Pankaj Bansal <pankaj.bansal@nxp.com> Link: https://lore.kernel.org/linux-acpi/20191215203303.29811-1-pankaj.bansal@nxp.com/ Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Pankaj Bansal <pankaj.bansal@nxp.com> Cc: Will Deacon <will@kernel.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15ACPI/IORT: Parse SSID property of named component nodeJean-Philippe Brucker1-0/+18
Named component nodes in the IORT tables describe the number of Substream ID bits (aka. PASID) supported by the device. Propagate this value to the fwspec structure in order to enable PASID for platform devices. Acked-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-13ACPICA: All acpica: Update copyrights to 2020 Including tool signons.Bob Moore142-143/+143
ACPICA commit 8b9c69d0984067051ffbe8526f871448ead6a26b Link: https://github.com/acpica/acpica/commit/8b9c69d0 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-13apei/ghes: Do not delay GHES pollingBhaskar Upadhaya1-1/+1
Currently, the ghes_poll_func() timer callback is registered with the TIMER_DEFERRABLE flag. Thus, it is run when the CPU eventually wakes up together with a subsequent non-deferrable timer and not at the precisely configured polling interval. For polling mode, the polling interval configured by firmware should not be exceeded according to the ACPI spec 6.3, Table 18-394. The definition of the polling interval is: "Indicates the poll interval in milliseconds OSPM should use to periodically check the error source for the presence of an error condition." If this interval is extended due to the timer callback deferring, error records can get lost. Which we are observing on our ThunderX2 platforms. Therefore, remove the TIMER_DEFERRABLE flag so that the timer callback executes at the precise interval. Signed-off-by: Bhaskar Upadhaya <bupadhaya@marvell.com> [ bp: Subject & changelog ] Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-07ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switchJason Ekstrand1-0/+11
Running evemu-record on the lid switch event shows that the lid reports the first "close" but then never reports an "open". This causes systemd to continuously re-suspend the laptop every 30s. Resetting the _LID to "open" fixes the issue. Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-07ACPI: PPTT: Consistently use unsigned int as parameter typeTian Tao1-14/+15
The fourth parameter 'level' of function 'acpi_find_cache_level()' is a signed interger, but its caller 'acpi_find_cache_node()' passes that parameter an unsigned interger. Make the paramter type inconsistency go away. Signed-off-by: Tian Tao <tiantao6@huawei.com> Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> [ rjw: Subject/changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig1-1/+1
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-27ACPI: EC: Reference count query handlers under lockRafael J. Wysocki1-12/+4
There is a race condition in acpi_ec_get_query_handler() theoretically allowing query handlers to go away before refernce counting them. In order to avoid it, call kref_get() on query handlers under ec->mutex. Also simplify the code a bit while at it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-27ACPI: processor: Export acpi_processor_evaluate_cst()Rafael J. Wysocki2-142/+157
The intel_idle driver will be modified to use ACPI _CST subsequently and it will need to call acpi_processor_evaluate_cst(), so move that function to acpi_processor.c so that it is always present (which is required by intel_idle) and export it to modules to allow the ACPI processor driver (which is modular) to call it. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-27ACPI: processor: Make ACPI_PROCESSOR_CSTATE depend on ACPI_PROCESSORRafael J. Wysocki1-0/+1
To avoid build errors when CONFIG_ACPI_PROCESSOR_CSTATE is set and CONFIG_ACPI_PROCESSOR is not (that may appear in randconfig builds), make the former depend on the latter. Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-27Merge tag 'drm-intel-next-2019-12-23' of ↵Dave Airlie1-8/+3
git://anongit.freedesktop.org/drm/drm-intel into drm-next i915 features for v5.6: - Separate hardware and uapi state (Maarten) - Expose a number of sprite and plane formats (Ville) - DDC symlink in HDMI connector sysfs directory (Andrzej Pietrasiewicz) - Improve obj->mm.lock nesting lock annotation (Daniel) (Includes lockdep changes) - Selftest improvements across the board (Chris) - ICL/TGL VDSC support on DSI (Jani, Vandita) - TGL DSB fixes (Animesh, Lucas, Tvrtko) - VBT parsing improvements and fixes (Lucas, Matt, José, Jani, Dan Carpenter) - Fix LPSS vs. PMIC PWM backlight use on BYT/CHT (Hans) (Includes ACPI+MFD changes) - Display state, crtc, plane code refactoring (Ville) - Set opregion chpd value to indicate the driver handles hotplug (Hans de Goede) - DSI updates and fixes, TGL pipe D support, port mapping (José, Jani, Vandita) - Make HDCP 2.2 support cover CFL (Juston Li) - Fix CML PCI IDs and ULT (Shawn Lee) - CMP-V PCH fix (Imre) - TGL: Add another TGL PCH ID (James) - EHL/JSL: Add new PCI IDs (James) - Rename pipe update tracepoints (Ville) - Fix FBC on GLK+ (Ville) - GuC fixes and improvements (Daniele, Don Hiatt, Stuart Summers, Matthew Brost) - Display debugfs improvements (Ville) - Hotplug/irq fixes (Matt) - PSR fixes and improvements (José) - DRM_I915_GEM_MMAP_OFFSET ioctl (Abdiel) - Static analysis fixes (Colin Ian King) - Register sysctl path globally (Venkata Sandeep Dhanalakota) - Introduce new macros for tracing (Venkata Sandeep Dhanalakota) - Migrate gt towards intel_uncore_read/write (Andi) - Add rps frequency translation helpers (Andi) - Fix TGL transcoder clock off sequence (José) - Fix TGL port A audio (Kai Vehmanen) - TGL render decompression (DK) - GEM/GT improvements and fixes across the board (Chris) - Couple of backmerges (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Tue 24 Dec 2019 03:20:48 AM AEST # gpg: using RSA key D398079D26ABEE6F # gpg: Good signature from "Jani Nikula <jani.nikula@intel.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 1565 A65B 77B0 632E 1124 E59C D398 079D 26AB EE6F # Conflicts: # drivers/gpu/drm/i915/display/intel_fbc.c # drivers/gpu/drm/i915/gt/intel_lrc.c # drivers/gpu/drm/i915/i915_gem.c From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87lfr3rkry.fsf@intel.com
2019-12-23iommu/arm-smmu: Support SMMU module probing from the IORTArd Biesheuvel1-2/+2
Add support for SMMU drivers built as modules to the ACPI/IORT device probing path, by deferring the probe of the master if the SMMU driver is known to exist but has not been loaded yet. Given that the IORT code registers a platform device for each SMMU that it discovers, we can easily trigger the udev based autoloading of the SMMU drivers by making the platform device identifier part of the module alias. Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: John Garry <john.garry@huawei.com> # only manual smmu ko loading Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> Tested-by: John Garry <john.garry@huawei.com> # smmu v3 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-20ACPICA: Dispatcher: always generate buffer objects for ASL create_field() ↵Maximilian Luz3-3/+12
operator ACPICA commit 79a466b64e6af36cc83102f05915e56cb7dd89ab According to table 19-419 of the ACPI 6.3 specification, buffer_fields created using the ASL create_field() Operator have been treated as integers if the buffer_field is small enough to fit inside of an ASL integer (32-bits or 64-bits depending on the definition block revision). If they are larger, buffer fields are treated as ASL Buffer objects. However, this is not true for other AML interpreter implementations. It has been discovered that other AML interpreters always treat buffer fields created by create_field() as a buffer regardless of the length of the buffer field. More specifically, the Microsoft AML interpreter always treats buffer fields created by the create_field() operator as buffer. ACPICA currently does this only when the field size is larger than the maximum integer width. This causes problems with AML code shipped in Microsoft Surface devices. More details: The control methods in these devices determine the success of an ASL control method execution by examining the type resulting from storing a buffer field created by a create_field() operator. On success, a Buffer object is expected, on failure an Integer containing an error code. This buffer object is created with a dynamic size via the create_field() operator. Due to the difference in behavior, Buffer values of small size are however converted to Integers and thus interpreted by the control method as having failed, whereas in reality it succeeded. Below is an example of a control method called TEST that illustrates this behavior. Method (CBUF) // Create a Buffer field { /* * Depending on the value of RAND, ACPICA interpreter will treat * BF00 as an integer or buffer. */ create_field (BUFF, 0, RAND, BF00) return (BF00) } Method (TEST) { /* * Storing the value returned by CBUF to local0 will result in * implicit type conversion outlined in the ACPI specification. * * ACPICA will treat local0 like an ASL integer if RAND is less * than or equal to 64 or 32 (depending on the definition_block * revision). If RAND is greater, it will be treated like an ASL * buffer. Other implementations treat local0 like an ASL buffer * regardless of the value of RAND. */ local0 = CBUF() /* * object_type of 0x03 represents an ASL Buffer */ if (object_type (Local0) != 0x03) { // Error on ACPICA if RAND is small enough } else { /* * Success on APICA if RAND is large enough * Other implementations always take this path because local0 * is always treated as a buffer. */ } } This change prohibits the previously mentioned integer conversion to match other AML interpreter implementations (Microsoft) that do not conform to the ACPI specification. Link: https://github.com/acpica/acpica/commit/79a466b6 Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-20ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1Erik Kaneda2-1/+22
ACPICA commit 29cc8dbc5463a93625bed87d7550a8bed8913bf4 create_buffer_field is a deferred op that is typically processed in load pass 2. However, disassembly of control method contents walk the parse tree with ACPI_PARSE_LOAD_PASS1 and AML_CREATE operators are processed in a later walk. This is a problem when there is a control method that has the same name as the AML_CREATE object. In this case, any use of the name segment will be detected as a method call rather than a reference to a buffer field. If this is detected as a method call, it can result in a mal-formed parse tree if the control methods have parameters. This change in processing AML_CREATE ops earlier solves this issue by inserting the named object in the ACPI namespace so that references to this name would be detected as a name string rather than a method call. Link: https://github.com/acpica/acpica/commit/29cc8dbc Reported-by: Elia Geretto <elia.f.geretto@gmail.com> Tested-by: Elia Geretto <elia.f.geretto@gmail.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-20ACPICA: debugger: fix spelling mistake "adress" -> "address"Colin Ian King1-1/+1
ACPICA commit 7aa72c5fdf75c5b80adf758980e06bcafb7f8670 There is a spelling mistake in an error message. Fix it. Link: https://github.com/acpica/acpica/commit/7aa72c5f Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-20ACPI: video: Do not export a non working backlight interface on MSI MS-7721 ↵Hans de Goede1-0/+13
boards Despite our heuristics to not wrongly export a non working ACPI backlight interface on desktop machines, we still end up exporting one on desktops using a motherboard from the MSI MS-7721 series. I've looked at improving the heuristics, but in this case a quirk seems to be the only way to solve this. While at it also add a comment to separate the video_detect_force_none entries in the video_detect_dmi_table from other type of entries, as we already do for the other entry types. Cc: All applicable <stable@vger.kernel.org> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1783786 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-20ACPI: fan: Add Tiger Lake ACPI device IDGayatri Kammela2-0/+2
Tiger Lake has a new unique ACPI device ID for the ACPI fan that needs to be added to the fan driver and to the blacklist in acpi_dev_pm_attach() to support it. Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> [ rjw: Subject & changelog, fold in another patch ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-20ACPI: DPTF: Add Tiger Lake ACPI device IDsGayatri Kammela2-0/+5
Tiger Lake has new unique ACPI device IDs that need to be added to the DPTF drivers to support it. Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-20ACPI: fan: Expose fan performance state informationSrinivas Pandruvada1-8/+88
When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-17ACPI / LPSS: Rename pwm_backlight pwm-lookup to pwm_soc_backlightHans de Goede1-8/+3
At least Bay Trail (BYT) and Cherry Trail (CHT) devices can use 1 of 2 different PWM controllers for controlling the LCD's backlight brightness. Either the one integrated into the PMIC or the one integrated into the SoC (the 1st LPSS PWM controller). So far in the LPSS code on BYT we have skipped registering the LPSS PWM controller "pwm_backlight" lookup entry when a Crystal Cove PMIC is present, assuming that in this case the PMIC PWM controller will be used. On CHT we have been relying on only 1 of the 2 PWM controllers being enabled in the DSDT at the same time; and always registered the lookup. So far this has been working, but the correct way to determine which PWM controller needs to be used is by checking a bit in the VBT table and recently I've learned about 2 different BYT devices: Point of View MOBII TAB-P800W Acer Switch 10 SW5-012 Which use a Crystal Cove PMIC, yet the LCD is connected to the SoC/LPSS PWM controller (and the VBT correctly indicates this), so here our old heuristics fail. Since only the i915 driver has access to the VBT, this commit renames the "pwm_backlight" lookup entries for the 1st BYT/CHT LPSS PWM controller to "pwm_soc_backlight" so that the i915 driver can do a pwm_get() for the right controller depending on the VBT bit, instead of the i915 driver relying on a "pwm_backlight" lookup getting registered which magically points to the right controller. Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191216202906.1662893-2-hdegoede@redhat.com
2019-12-16ACPI: processor: Clean up acpi_processor_evaluate_cst()Rafael J. Wysocki1-62/+52
Clean up acpi_processor_evaluate_cst() in multiple ways: * Rename current_count to last_index which matches the purpose of the variable better. * Consistently use acpi_handle_*() for printing messages and make the messages cleaner. * Drop redundant parens and braces. * Rewrite and clarify comments. * Rearrange checks and drop the redundant ones. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-16ACPI: processor: Introduce acpi_processor_evaluate_cst()Rafael J. Wysocki1-20/+32
In order to separate the ACPI _CST evaluation from checks specific to the ACPI processor driver, move the majority of the acpi_processor_get_power_info_cst() function body to a new function, acpi_processor_evaluate_cst(), that will extract the C-states information from _CST output, and redefine acpi_processor_get_power_info_cst() as a wrapper around it. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-16ACPI: processor: Export function to claim _CST controlRafael J. Wysocki2-8/+29
The intel_idle driver will be modified to use ACPI _CST subsequently and it will need to notify the platform firmware of that if acpi_gbl_FADT.cst_control is set, so add a routine for this purpose, acpi_processor_claim_cst_control(), to acpi_processor.c (so that it is always present which is required by intel_idle) and export it to allow the ACPI processor driver (which is modular) to call it. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-16ACPI: video: Use native backlight on Lenovo E41-25/45Aaron Ma1-0/+16
ACPI backlight control doesn't work on 2 Lenovo E41 laptops. So force to use native backlight control on them. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-16ACPI: video: fix typo in commentKacper Piwiński1-1/+1
Signed-off-by: Kacper Piwiński <cosiekvfj@o2.pl> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-16ACPI / battery: Deal better with neither design nor full capacity not being ↵Hans de Goede1-12/+39
reported Commit b41901a2cf06 ("ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity") added support for some (broken) devices which always report 0 for both design_capacity and full_charge_capacity. Since the device that commit was written as a fix for is not reporting any form of "full" capacity we cannot calculate the value for the POWER_SUPPLY_PROP_CAPACITY, this is worked around by using an alternative array of available properties which does not contain this property. This is necessary because userspace (upower) treats us returning -ENODEV as 0 and then typically will trigger an emergency shutdown because of that. Userspace does not do this if the capacity sysfs attribute is not present at all. There are two potential problems with that commit: 1) It assumes that both full_charge- and design-capacity are broken at the same time and only checks if full_charge- is broken. 2) It assumes that this only ever happens for devices which report energy units rather then charge units. This commit fixes both issues by only using the alternative array of available properties if both full_charge- and design-capacity are broken and by also adding an alternative array of available properties for devices using mA units. Fixes: b41901a2cf06 ("ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity") Cc: 4.19+ <stable@vger.kernel.org> # 4.19+ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-16ACPI / battery: Use design-cap for capacity calculations if full-cap is not ↵Hans de Goede1-3/+8
available The ThunderSoft TS178 tablet's _BIX implementation reports design_capacity but not full_charge_capacity. Before this commit this would cause us to return -ENODEV for the capacity attribute, which userspace does not like. Specifically upower does this: if (sysfs_file_exists (native_path, "capacity")) { percentage = sysfs_get_double (native_path, "capacity"); Where the sysfs_get_double() helper returns 0 when we return -ENODEV, so the battery always reads 0% if we return -ENODEV. This commit fixes this by using the design-capacity instead of the full-charge-capacity when the full-charge-capacity is not available. Fixes: b41901a2cf06 ("ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity") Cc: 4.19+ <stable@vger.kernel.org> # 4.19+ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>