summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)AuthorFilesLines
2022-01-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge yet more updates from Andrew Morton: "This is the post-linux-next queue. Material which was based on or dependent upon material which was in -next. 69 patches. Subsystems affected by this patch series: mm (migration and zsmalloc), sysctl, proc, and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (69 commits) mm: hide the FRONTSWAP Kconfig symbol frontswap: remove support for multiple ops mm: mark swap_lock and swap_active_head static frontswap: simplify frontswap_register_ops frontswap: remove frontswap_test mm: simplify try_to_unuse frontswap: remove the frontswap exports frontswap: simplify frontswap_init frontswap: remove frontswap_curr_pages frontswap: remove frontswap_shrink frontswap: remove frontswap_tmem_exclusive_gets frontswap: remove frontswap_writethrough mm: remove cleancache lib/stackdepot: always do filter_irq_stacks() in stack_depot_save() lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() proc: remove PDE_DATA() completely fs: proc: store PDE()->data into inode->i_private zsmalloc: replace get_cpu_var with local_lock zsmalloc: replace per zpage lock with pool->migrate_lock locking/rwlocks: introduce write_lock_nested ...
2022-01-22Merge tag 'acpi-5.17-rc1-3' of ↵Linus Torvalds5-5/+16
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull extra ACPI updates from Rafael Wysocki: "These fix and clean up the ACPI CPPC driver on top of the recent changes in it merged previously and add some new device IDs to the ACPI DPTF driver. Specifics: - Fix a recently introduced endianness-related issue in the ACPI CPPC library and clean it up on top of that (Rafael Wysocki) - Add new device IDs for the Raptor Lake SoC to the ACPI DPTF driver (Srinivas Pandruvada)" * tag 'acpi-5.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: DPTF: Support Raptor Lake ACPI: CPPC: Drop redundant local variable from cpc_read() ACPI: CPPC: Fix up I/O port access in cpc_read()
2022-01-22proc: remove PDE_DATA() completelyMuchun Song1-1/+1
Remove PDE_DATA() completely and replace it with pde_data(). [akpm@linux-foundation.org: fix naming clash in drivers/nubus/proc.c] [akpm@linux-foundation.org: now fix it properly] Link: https://lkml.kernel.org/r/20211124081956.87711-2-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-21Merge branches 'acpi-cppc' and 'acpi-dptf'Rafael J. Wysocki5-5/+16
Merge new ACPI CPPC driver updates and new Raptor Lake DPTF device IDs for 5.17-rc1. * acpi-cppc: ACPI: CPPC: Drop redundant local variable from cpc_read() ACPI: CPPC: Fix up I/O port access in cpc_read() * acpi-dptf: ACPI: DPTF: Support Raptor Lake
2022-01-19Merge tag 'kbuild-v5.17' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add new kconfig target 'make mod2noconfig', which will be useful to speed up the build and test iteration. - Raise the minimum supported version of LLVM to 11.0.0 - Refactor certs/Makefile - Change the format of include/config/auto.conf to stop double-quoting string type CONFIG options. - Fix ARCH=sh builds in dash - Separate compression macros for general purposes (cmd_bzip2 etc.) and the ones for decompressors (cmd_bzip2_with_size etc.) - Misc Makefile cleanups * tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kbuild: add cmd_file_size arch: decompressor: remove useless vmlinux.bin.all-y kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22} kbuild: drop $(size_append) from cmd_zstd sh: rename suffix-y to suffix_y doc: kbuild: fix default in `imply` table microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV} certs: move scripts/extract-cert to certs/ kbuild: do not quote string values in include/config/auto.conf kbuild: do not include include/config/auto.conf from shell scripts certs: simplify $(srctree)/ handling and remove config_filename macro kbuild: stop using config_filename in scripts/Makefile.modsign certs: remove misleading comments about GCC PR certs: refactor file cleaning certs: remove unneeded -I$(srctree) option for system_certificates.o certs: unify duplicated cmd_extract_certs and improve the log certs: use $< and $@ to simplify the key generation rule kbuild: remove headers_check stub kbuild: move headers_check.pl to usr/include/ certs: use if_changed to re-generate the key when the key type is changed ...
2022-01-18Merge tag 'acpi-5.17-rc1-2' of ↵Linus Torvalds9-52/+1072
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "The most significant item here is the Platform Firmware Runtime Update and Telemetry (PFRUT) support designed to allow certain pieces of the platform firmware to be updated on the fly, among other things. Also important is the e820 handling change on x86 that should work around PCI BAR allocation issues on some systems shipping since 2019. The rest is just a handful of assorted fixes and cleanups on top of the ACPI material merged previously. Specifics: - Add support for the the Platform Firmware Runtime Update and Telemetry (PFRUT) interface based on ACPI to allow certain pieces of the platform firmware to be updated without restarting the system and to provide a mechanism for collecting platform firmware telemetry data (Chen Yu, Dan Carpenter, Yang Yingliang). - Ignore E820 reservations covering PCI host bridge windows on sufficiently recent x86 systems to avoid issues with allocating PCI BARs on systems where the E820 reservations cover the entire PCI host bridge memory window returned by the _CRS object in the system's ACPI tables (Hans de Goede). - Fix and clean up acpi_scan_init() (Rafael Wysocki). - Add more sanity checking to ACPI SPCR tables parsing (Mark Langsdorf). - Fix up ACPI APD (AMD Soc) driver initialization (Jiasheng Jiang). - Drop unnecessary "static" from the ACPI PCC address space handling driver added recently (kernel test robot)" * tag 'acpi-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PCC: pcc_ctx can be static ACPI: scan: Rename label in acpi_scan_init() ACPI: scan: Simplify initialization of power and sleep buttons ACPI: scan: Change acpi_scan_init() return value type to void ACPI: SPCR: check if table->serial_port.access_width is too wide ACPI: APD: Check for NULL pointer after calling devm_ioremap() x86/PCI: Ignore E820 reservations for bridge windows on newer systems ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl() ACPI: pfr_update: Fix return value check in pfru_write() ACPI: tools: Introduce utility for firmware updates/telemetry ACPI: Introduce Platform Firmware Runtime Telemetry driver ACPI: Introduce Platform Firmware Runtime Update device driver efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures
2022-01-17ACPI: DPTF: Support Raptor LakeSrinivas Pandruvada4-0/+10
Add Raptor Lake ACPI IDs for DPTF devices. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-17ACPI: CPPC: Drop redundant local variable from cpc_read()Rafael J. Wysocki1-4/+3
The ret_val local variable in cpc_read() is not necessary, so eliminate it. No functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Huang Rui <ray.huang@amd.com>
2022-01-17ACPI: CPPC: Fix up I/O port access in cpc_read()Rafael J. Wysocki1-1/+3
The code as currently implemented does not work on big endian systems, so fix it up. Fixes: a2c8f92bea5f ("ACPI: CPPC: Implement support for SystemIO registers") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/linux-acpi/20220111092928.GA24968@kili/ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Huang Rui <ray.huang@amd.com>
2022-01-17Merge branch 'acpi-pfrut'Rafael J. Wysocki4-0/+1033
Merge support for the Platform Firmware Runtime Update and Telemetry interface based on ACPI. The interface provided here allows updating certain pieces of the platform firmware without restarting the system and collecting platform firmware telemetry data. This also includes a utility for accesing the new interface from user space. * acpi-pfrut: ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl() ACPI: pfr_update: Fix return value check in pfru_write() ACPI: tools: Introduce utility for firmware updates/telemetry ACPI: Introduce Platform Firmware Runtime Telemetry driver ACPI: Introduce Platform Firmware Runtime Update device driver efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures
2022-01-17Merge branches 'acpi-x86', 'acpi-tables', 'acpi-soc' and 'acpi-pcc'Rafael J. Wysocki3-3/+10
Merge additional ACPI-related updates for 5.17-rc1: - Ignore E820 reservations covering PCI host bridge windows on sufficiently recent x86 systems to avoid issues with allocating PCI BARs on systems where the E820 reservations cover the entire PCI host bridge memory window returned by the _CRS object in the system's ACPI tables (Hans de Goede). - Add more sanity checking to ACPI SPCR tables parsing (Mark Langsdorf). - Fix up ACPI APD (AMD Soc) driver initialization (Jiasheng Jiang). - Drop unnecessary "static" from the ACPI PCC address space handling driver added recently (kernel test robot). * acpi-x86: x86/PCI: Ignore E820 reservations for bridge windows on newer systems * acpi-tables: ACPI: SPCR: check if table->serial_port.access_width is too wide * acpi-soc: ACPI: APD: Check for NULL pointer after calling devm_ioremap() * acpi-pcc: ACPI: PCC: pcc_ctx can be static
2022-01-13Merge tag 'clk-for-linus' of ↵Linus Torvalds1-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a couple patches in the framework core this time around but they're mostly minor cleanups and some debugfs stuff. The real work that's in here is the typical pile of clk driver updates and new SoC support. Per usual (or maybe just recent trends), Qualcomm gains a handful of SoC drivers additions and has the largest diffstat. After that there are quite a few updates to the Allwinner (sunxi) drivers to support modular drivers and Renesas is heavily updated to add more support for various clks. Overall it looks pretty normal. New Drivers: - Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770 - MediaTek mt7986 SoC basic support - Clock and reset driver for Toshiba Visconti SoCs - Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8) - Allwinner D1 clks - Lan966x Generic Clock Controller driver and associated DT bindings - Qualcomm SDX65, SM8450, and MSM8976 GCC clks - Qualcomm SDX65 and SM8450 RPMh clks Updates: - Set suppress_bind_attrs to true for i.MX8ULP driver - Switch from do_div to div64_ul for throughout all i.MX drivers - Fix imx8mn_clko1_sels for i.MX8MN - Remove unused IPG_AUDIO_ROOT from i.MX8MP - Switch parent for audio_root_clk to audio ahb in i.MX8MP driver - Removal of all remaining uses of __clk_lookup() in drivers/clk/samsung - Refactoring of the CPU clocks registration to use common interface - An update of the Exynos850 driver (support for more clock domains) required by the E850-96 development board - Prep for runtime PM and generic power domains on Tegra - Support modular Allwinner clk drivers via platform bus - Lan966x clock driver extended to support clock gating - Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and thermal (TSU) clocks and resets on Renesas RZ/G2L - Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2 clock drivers, and in the Renesas SDHI driver - Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable - Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add GPU clock and resets on Renesas RZ/G2L - Add clk-provider.h to various Qualcomm clk drivers - devm version of clk_hw_register_gate() - kerneldoc fixes in a couple drivers" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (131 commits) clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup() clk: mediatek: add mt7986 clock support clk: mediatek: add mt7986 clock IDs dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper clk: x86: Fix clk_gate_flags for RV_CLK_GATE clk: x86: Use dynamic con_id string during clk registration ACPI: APD: Add a fmw property clk-name drivers: acpi: acpi_apd: Remove unused device property "is-rv" x86: clk: clk-fch: Add support for newer family of AMD's SOC clk: ingenic: Add MDMA and BDMA clocks dt-bindings: clk/ingenic: Add MDMA and BDMA clocks clk: bm1880: remove kfrees on static allocations clk: Drop unused COMMON_CLK_STM32MP157_SCMI config clk: st: clkgen-mux: search reg within node or parent clk: st: clkgen-fsyn: search reg within node or parent clk: Enable/Disable runtime PM for clk_summary MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller clk: visconti: Add support common clock driver and reset driver ...
2022-01-13Merge tag 'cxl-for-5.17' of ↵Linus Torvalds3-22/+127
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull CXL (Compute Express Link) updates from Dan Williams: "The highlight is initial support for CXL memory hotplug. The static NUMA node (ACPI SRAT Physical Address to Proximity Domain) information known to platform firmware is extended to support the potential performance-class / memory-target nodes dynamically created from available CXL memory device capacity. New unit test infrastructure is added for validating health information payloads. Fixes to module reload stress and stack usage from exposure in -next are included. A symbol rename and some other miscellaneous fixups are included as well. Summary: - Rework ACPI sub-table infrastructure to optionally be used outside of __init scenarios and use it for CEDT.CFMWS sub-table parsing. - Add support for extending num_possible_nodes by the potential hotplug CXL memory ranges - Extend tools/testing/cxl with mock memory device health information - Fix a module-reload workqueue race - Fix excessive stack-frame usage - Rename the driver context data structure from "cxl_mem" since that name collides with a proposed driver name - Use EXPORT_SYMBOL_NS_GPL instead of -DDEFAULT_SYMBOL_NAMESPACE at build time" * tag 'cxl-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/core: Remove cxld_const_init in cxl_decoder_alloc() cxl/pmem: Fix module reload vs workqueue state ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT cxl/test: Mock acpi_table_parse_cedt() cxl/acpi: Convert CFMWS parsing to ACPI sub-table helpers ACPI: Add a context argument for table parsing handlers ACPI: Teach ACPI table parsing about the CEDT header format ACPI: Keep sub-table parsing infrastructure available for modules tools/testing/cxl: add mock output for the GET_HEALTH_INFO command cxl/memdev: Remove unused cxlmd field cxl/core: Convert to EXPORT_SYMBOL_NS_GPL cxl/memdev: Change cxl_mem to a more descriptive name cxl/mbox: Remove bad comment cxl/pmem: Fix reference counting for delayed work
2022-01-13Merge tag 'libnvdimm-for-5.17' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull dax and libnvdimm updates from Dan Williams: "The bulk of this is a rework of the dax_operations API after discovering the obstacles it posed to the work-in-progress DAX+reflink support for XFS and other copy-on-write filesystem mechanics. Primarily the need to plumb a block_device through the API to handle partition offsets was a sticking point and Christoph untangled that dependency in addition to other cleanups to make landing the DAX+reflink support easier. The DAX_PMEM_COMPAT option has been around for 4 years and not only are distributions shipping userspace that understand the current configuration API, but some are not even bothering to turn this option on anymore, so it seems a good time to remove it per the deprecation schedule. Recall that this was added after the device-dax subsystem moved from /sys/class/dax to /sys/bus/dax for its sysfs organization. All recent functionality depends on /sys/bus/dax. Some other miscellaneous cleanups and reflink prep patches are included as well. Summary: - Simplify the dax_operations API: - Eliminate bdev_dax_pgoff() in favor of the filesystem maintaining and applying a partition offset to all its DAX iomap operations. - Remove wrappers and device-mapper stacked callbacks for ->copy_from_iter() and ->copy_to_iter() in favor of moving block_device relative offset responsibility to the dax_direct_access() caller. - Remove the need for an @bdev in filesystem-DAX infrastructure - Remove unused uio helpers copy_from_iter_flushcache() and copy_mc_to_iter() as only the non-check_copy_size() versions are used for DAX. - Prepare XFS for the pending (next merge window) DAX+reflink support - Remove deprecated DEV_DAX_PMEM_COMPAT support - Cleanup a straggling misuse of the GUID api" * tag 'libnvdimm-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (38 commits) iomap: Fix error handling in iomap_zero_iter() ACPI: NFIT: Import GUID before use dax: remove the copy_from_iter and copy_to_iter methods dax: remove the DAXDEV_F_SYNC flag dax: simplify dax_synchronous and set_dax_synchronous uio: remove copy_from_iter_flushcache() and copy_mc_to_iter() iomap: turn the byte variable in iomap_zero_iter into a ssize_t memremap: remove support for external pgmap refcounts fsdax: don't require CONFIG_BLOCK iomap: build the block based code conditionally dax: fix up some of the block device related ifdefs fsdax: shift partition offset handling into the file systems dax: return the partition offset from fs_dax_get_by_bdev iomap: add a IOMAP_DAX flag xfs: pass the mapping flags to xfs_bmbt_to_iomap xfs: use xfs_direct_write_iomap_ops for DAX zeroing xfs: move dax device handling into xfs_{alloc,free}_buftarg ext4: cleanup the dax handling in ext4_fill_super ext2: cleanup the dax handling in ext2_fill_super fsdax: decouple zeroing from the iomap buffered I/O code ...
2022-01-12Merge tag 'usb-5.17-rc1' of ↵Linus Torvalds2-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 5.17-rc1. Nothing major in here, just lots of little updates and cleanups. These include: - some USB header fixes picked from Ingo's header-splitup work - more USB4/Thunderbolt hardware support added - USB gadget driver updates and additions - USB typec additions (includes some acpi changes, which were acked by the ACPI maintainer) - core USB fixes as found by syzbot that were too late for 5.16-final - USB dwc3 driver updates - USB dwc2 driver updates - platform_get_irq() conversions of some USB drivers - other minor USB driver updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (111 commits) docs: ABI: fixed formatting in configfs-usb-gadget-uac2 usb: gadget: u_audio: Subdevice 0 for capture ctls usb: gadget: u_audio: fix calculations for small bInterval usb: dwc2: gadget: initialize max_speed from params usb: dwc2: do not gate off the hardware if it does not support clock gating usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe headers/deps: USB: Optimize <linux/usb/ch9.h> dependencies, remove <linux/device.h> USB: common: debug: add needed kernel.h include headers/prep: Fix non-standard header section: drivers/usb/host/ohci-tmio.c headers/prep: Fix non-standard header section: drivers/usb/cdns3/core.h headers/prep: usb: gadget: Fix namespace collision USB: core: Fix bug in resuming hub's handling of wakeup requests USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status usb: dwc3: dwc3-qcom: Add missing platform_device_put() in dwc3_qcom_acpi_register_core usb: gadget: clear related members when goto fail usb: gadget: don't release an existing dev->buf usb: dwc2: Simplify a bitmap declaration usb: Remove usb_for_each_port() usb: typec: port-mapper: Convert to the component framework usb: Link the ports to the connectors they are attached to ...
2022-01-12ACPI: PCC: pcc_ctx can be statickernel test robot1-1/+1
drivers/acpi/acpi_pcc.c:34:22: warning: symbol 'pcc_ctx' was not declared. Should it be static? Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-12ACPI: scan: Rename label in acpi_scan_init()Rafael J. Wysocki1-3/+3
Rename the "out" label in acpi_scan_init() to "unlock", which is a better match for its purpose, and fix up its alignment. No functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2022-01-12ACPI: scan: Simplify initialization of power and sleep buttonsRafael J. Wysocki1-39/+23
It should be perfectly fine to use ACPI if the "fixed" power or sleep buttons cannot be initialized. Moreover, running acpi_bus_scan() successfully on ACPI_ROOT_OBJECT generally causes many devices to be enumerated and probed, possibly including the entire PCI bus, so unregistering acpi_root if the registration of the "fixed" buttons fails is rather unhelpful. For this reason, do not fail acpi_scan_init() when acpi_bus_scan_fixed() fails and turn the latter into a void function. While at it, drop the outdated and misleading comment from acpi_bus_scan_fixed(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2022-01-12ACPI: scan: Change acpi_scan_init() return value type to voidRafael J. Wysocki2-8/+4
The only caller of acpi_scan_init(), acpi_init(), doesn't check its return value, so turn it into a void function. This avoids complaints from the Smatch static checker that the function should return a negative error code when it fails, which is not really a problem in this particular case. No intentional functional impact. Link: https://lore.kernel.org/linux-acpi/20220106082317.GA9123@kili/ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2022-01-11ACPI: SPCR: check if table->serial_port.access_width is too wideMark Langsdorf1-2/+7
If table->serial_port.access_width is more than 29, it causes undefined behavior when ACPI_ACCESS_BIT_WIDTH shifts it to (1 << ((size) + 2)): [ 0.000000] UBSAN: Undefined behaviour in drivers/acpi/spcr.c:114:11 [ 0.000000] shift exponent 102 is too large for 32-bit type 'int' Use the new ACPI_ACCESS_ defines to test that serial_port.access_width is less than 30 and set it to 6 if it is not. Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-11ACPI: APD: Check for NULL pointer after calling devm_ioremap()Jiasheng Jiang1-0/+2
Because devres_alloc() may fail, devm_ioremap() may return NULL. Then, 'clk_data->base' will be assigned to clkdev->data->base in platform_device_register_data(). The PTR_ERR_OR_ZERO() check on clk_data does not cover 'base', so it is better to add an explicit check against NULL after updating it. Fixes: 3f4ba94e3615 ("ACPI: APD: Add AMD misc clock handler support") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> [ rjw: Changelog rewrite ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-11Merge tag 'pm-5.17-rc1' of ↵Linus Torvalds2-9/+116
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "The most signigicant change here is the addition of a new cpufreq 'P-state' driver for AMD processors as a better replacement for the venerable acpi-cpufreq driver. There are also other cpufreq updates (in the core, intel_pstate, ARM drivers), PM core updates (mostly related to adding new macros for declaring PM operations which should make the lives of driver developers somewhat easier), and a bunch of assorted fixes and cleanups. Summary: - Add new P-state driver for AMD processors (Huang Rui). - Fix initialization of min and max frequency QoS requests in the cpufreq core (Rafael Wysocki). - Fix EPP handling on Alder Lake in intel_pstate (Srinivas Pandruvada). - Make intel_pstate update cpuinfo.max_freq when notified of HWP capabilities changes and drop a redundant function call from that driver (Rafael Wysocki). - Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel, Stephen Boyd, Vladimir Zapolskiy). - Fix double devm_remap() in the Mediatek cpufreq driver (Hector Yuan). - Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz Luba). - Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman). - Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman). - Fix two comments in cpuidle code (Jason Wang, Yang Li). - Allow model-specific normal EPB value to be used in the intel_epb sysfs attribute handling code (Srinivas Pandruvada). - Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki). - Add safety net to supplier device release in the runtime PM core code (Rafael Wysocki). - Capture device status before disabling runtime PM for it (Rafael Wysocki). - Add new macros for declaring PM operations to allow drivers to avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and update some drivers to use these macros (Paul Cercueil). - Allow ACPI hardware signature to be honoured during restore from hibernation (David Woodhouse). - Update outdated operating performance points (OPP) documentation (Tang Yizhou). - Reduce log severity for informative message regarding frequency transition failures in devfreq (Tzung-Bi Shih). - Add DRAM frequency controller devfreq driver for Allwinner sunXi SoCs (Samuel Holland). - Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd Bergmann). - Add support for new layout of Psys PowerLimit Register on SPR to the Intel RAPL power capping driver (Zhang Rui). - Fix typo in a comment in idle_inject.c (Jason Wang). - Remove unused function definition from the DTPM (Dynamit Thermal Power Management) power capping framework (Daniel Lezcano). - Reduce DTPM trace verbosity (Daniel Lezcano)" * tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits) x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment cpuidle: use default_groups in kobj_type x86: intel_epb: Allow model specific normal EPB value MAINTAINERS: Add AMD P-State driver maintainer entry Documentation: amd-pstate: Add AMD P-State driver introduction cpufreq: amd-pstate: Add AMD P-State performance attributes cpufreq: amd-pstate: Add AMD P-State frequencies attributes cpufreq: amd-pstate: Add boost mode support for AMD P-State cpufreq: amd-pstate: Add trace for AMD P-State module cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution cpufreq: amd-pstate: Add fast switch function for AMD P-State cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors ACPI: CPPC: Add CPPC enable register function ACPI: CPPC: Check present CPUs for determining _CPC is valid ACPI: CPPC: Implement support for SystemIO registers x86/msr: Add AMD CPPC MSR definitions x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag cpufreq: use default_groups in kobj_type ...
2022-01-11Merge tag 'acpi-5.17-rc1' of ↵Linus Torvalds62-476/+1037
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These are usual ACPICA code updates (although there are more of them than in the last few releases), a noticeable EC driver update (which mostly consists of cleanups, though), the device enumeration quirks handling rework from Hans, some updates eliminating unnecessary CPU cache flushing in some places (processor idle and system-wide PM code) and a bunch of assorted cleanups and fixes. Specifics: - Update ACPICA code in the kernel to the 20211217 upstream release including the following changes: - iASL/Disassembler: Additional support for NHLT table (Bob Moore). - Change a return_ACPI_STATUS (AE_BAD_PARAMETER) (Bob Moore). - Fix a couple of warnings under MSVC (Bob Moore). - iASL: Add TDEL table to both compiler/disassembler (Bob Moore). - iASL/NHLT table: "Specific Data" field support (Bob Moore). - Use original data_table_region pointer for accesses (Jessica Clarke). - Use original pointer for virtual origin tables (Jessica Clarke). - Macros: Remove ACPI_PHYSADDR_TO_PTR (Jessica Clarke). - Avoid subobject buffer overflow when validating RSDP signature (Jessica Clarke). - iASL: Add suppport for AGDI table (Ilkka Koskinen). - Hardware: Do not flush CPU cache when entering S4 and S5 (Kirill A. Shutemov). - Expand the ACPI_ACCESS_ definitions (Mark Langsdorf). - Utilities: Avoid deleting the same object twice in a row (Rafael Wysocki). - Executer: Fix REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R() (Rafael Wysocki). - Fix AEST Processor generic resource substructure data field byte length (Shuuichirou Ishii). - Fix wrong interpretation of PCC address (Sudeep Holla). - Add support for PCC Opregion special context data (Sudeep Holla). - Implement OperationRegion handler for PCC Type 3 subtype (Sudeep Holla). - Introduce acpi_fetch_acpi_dev() as a replacement for acpi_bus_get_device() and use it in the ACPI subsystem (Rafael Wysocki). - Avoid using _CID for device enumaration if _HID is missing or invalid (Rafael Wysocki). - Rework quirk handling during ACPI device enumeration and add some new quirks for known broken platforms (Hans de Goede). - Avoid unnecessary or redundant CPU cache flushing during system PM transitions (Kirill A. Shutemov). - Add PM debug messages related to power resources (Rafael Wysocki). - Fix kernel-doc comment in the PCI host bridge ACPI driver (Yang Li). - Rework flushing of EC work while suspended to idle and clean up the handling of events in the ACPI EC driver (Rafael Wysocki). - Prohibit ec_sys module parameter write_support from being used when the system is locked down (Hans de Goede). - Make the ACPI processor thermal driver use cpufreq_cpu_get() to check for presence of cpufreq policy (Manfred Spraul). - Avoid unnecessary CPU cache flushing in the ACPI processor idle driver (Kirill A. Shutemov). - Replace kernel.h with the necessary inclusions in the ACPI processor driver (Andy Shevchenko). - Use swap() instead of open coding it in the ACPI processor idle driver (Guo Zhengkui). - Fix the handling of defective LPAT in the ACPI xpower PMIC driver and clean up some definitions of PMIC data structures (Hans de Goede). - Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar). - Add AEST to the list of known ACPI table signatures (Shuuichirou Ishii). - Make ACPI NUMA code take hotpluggable memblocks into account when CONFIG_MEMORY_HOTPLUG is not set (Vitaly Kuznetsov). - Use default_groups in kobj_type in the ACPI sysfs code (Greg Kroah-Hartman). - Rearrange _CPC structure documentation (Andy Shevchenko). - Drop an always true check from the ACPI thermal driver (Adam Borowski). - Add new "not charging" quirk for Lenovo ThinkPads to the ACPI battery driver (Thomas Weißschuh)" * tag 'acpi-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPI: PCC: Implement OperationRegion handler for the PCC Type 3 subtype ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTs ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helper ACPI: processor: thermal: avoid cpufreq_get_policy() serdev: Do not instantiate serdevs on boards with known bogus DSDT entries i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodes PCI/ACPI: Fix acpi_pci_osc_control_set() kernel-doc comment ACPI: battery: Add the ThinkPad "Not Charging" quirk ACPI: sysfs: use default_groups in kobj_type ACPICA: Update version to 20211217 ACPICA: iASL/NHLT table: "Specific Data" field support ACPICA: iASL: Add suppport for AGDI table ACPICA: iASL: Add TDEL table to both compiler/disassembler ACPICA: Fixed a couple of warnings under MSVC ACPICA: Change a return_ACPI_STATUS (AE_BAD_PARAMETER) ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5 ACPICA: Add support for PCC Opregion special context data ACPICA: Fix wrong interpretation of PCC address ...
2022-01-11Merge tag 'media/v5.17-1' of ↵Linus Torvalds1-4/+33
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New sensor driver: ov5693 - A new driver for STM32 Chrom-ART Accelerator - Added V4L2 core helper functions for VP9 codec - Hantro driver has gained support for VP9 codecs - Added support for Maxim MAX96712 Quad GMSL2 Deserializer - The staging atomisp driver has gained lots of improvements, fixes and cleanups. It now works with userptr - Lots of random driver improvements as usual * tag 'media/v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (397 commits) media: ipu3-cio2: Add support for instantiating i2c-clients for VCMs media: ipu3-cio2: Call cio2_bridge_init() before anything else media: ipu3-cio2: Defer probing until the PMIC is fully setup media: hantro: Add support for Allwinner H6 media: dt-bindings: allwinner: document H6 Hantro G2 binding media: hantro: Convert imx8m_vpu_g2_irq to helper media: hantro: move postproc enablement for old cores media: hantro: vp9: add support for legacy register set media: hantro: vp9: use double buffering if needed media: hantro: add support for reset lines media: hantro: Fix probe func error path media: i2c: hi846: use pm_runtime_force_suspend/resume for system suspend media: i2c: hi846: check return value of regulator_bulk_disable() media: hi556: Support device probe in non-zero ACPI D state media: ov5675: Support device probe in non-zero ACPI D state media: imx208: Support device probe in non-zero ACPI D state media: ov2740: support device probe in non-zero ACPI D state media: ov5670: Support device probe in non-zero ACPI D state media: ov8856: support device probe in non-zero ACPI D state media: ov8865: Disable only enabled regulators on error path ...
2022-01-10Merge tag 'x86_sgx_for_v5.17_rc1' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SGX updates from Borislav Petkov: - Add support for handling hw errors in SGX pages: poisoning, recovering from poison memory and error injection into SGX pages - A bunch of changes to the SGX selftests to simplify and allow of SGX features testing without the need of a whole SGX software stack - Add a sysfs attribute which is supposed to show the amount of SGX memory in a NUMA node, similar to what /proc/meminfo is to normal memory - The usual bunch of fixes and cleanups too * tag 'x86_sgx_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/sgx: Fix NULL pointer dereference on non-SGX systems selftests/sgx: Fix corrupted cpuid macro invocation x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node x86/sgx: Fix minor documentation issues selftests/sgx: Add test for multiple TCS entry selftests/sgx: Enable multiple thread support selftests/sgx: Add page permission and exception test selftests/sgx: Rename test properties in preparation for more enclave tests selftests/sgx: Provide per-op parameter structs for the test enclave selftests/sgx: Add a new kselftest: Unclobbered_vdso_oversubscribed selftests/sgx: Move setup_test_encl() to each TEST_F() selftests/sgx: Encpsulate the test enclave creation selftests/sgx: Dump segments and /proc/self/maps only on failure selftests/sgx: Create a heap for the test enclave selftests/sgx: Make data measurement for an enclave segment optional selftests/sgx: Assign source for each segment selftests/sgx: Fix a benign linker warning x86/sgx: Add check for SGX pages to ghes_do_memory_failure() x86/sgx: Add hook to error injection address validation x86/sgx: Hook arch_memory_failure() into mainline code ...
2022-01-10Merge branches 'pm-cpuidle', 'pm-core' and 'pm-sleep'Rafael J. Wysocki1-5/+21
Merge cpuidle updates, PM core updates and one hiberation-related update for 5.17-rc1: - Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman). - Fix two comments in cpuidle code (Jason Wang, Yang Li). - Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki). - Add safety net to supplier device release in the runtime PM core code (Rafael Wysocki). - Capture device status before disabling runtime PM for it (Rafael Wysocki). - Add new macros for declaring PM operations to allow drivers to avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and update some drivers to use these macros (Paul Cercueil). - Allow ACPI hardware signature to be honoured during restore from hibernation (David Woodhouse). * pm-cpuidle: cpuidle: use default_groups in kobj_type cpuidle: Fix cpuidle_remove_state_sysfs() kerneldoc comment cpuidle: menu: Fix typo in a comment * pm-core: PM: runtime: Simplify locking in pm_runtime_put_suppliers() mmc: mxc: Use the new PM macros mmc: jz4740: Use the new PM macros PM: runtime: Add safety net to supplier device release PM: runtime: Capture device status before disabling runtime PM PM: core: Add new *_PM_OPS macros, deprecate old ones PM: core: Redefine pm_ptr() macro r8169: Avoid misuse of pm_ptr() macro * pm-sleep: PM: hibernate: Allow ACPI hardware signature to be honoured
2022-01-10Merge branches 'acpi-tables', 'acpi-numa', 'acpi-sysfs', 'acpi-cppc', ↵Rafael J. Wysocki7-47/+52
'acpi-thermal' and 'acpi-battery' Merge ACPI tables parsing code update, NUMA-related ACPI update, CPPC documentation update, ACPI sysfs attributes handling update and ACPI thermal and battery drivers updates for 5.17-rc1: - Add AEST to the list of known ACPI table signatures (Shuuichirou Ishii). - Make ACPI NUMA code take hotpluggable memblocks into account when CONFIG_MEMORY_HOTPLUG is not set (Vitaly Kuznetsov). - Use default_groups in kobj_type in the ACPI sysfs code (Greg Kroah-Hartman). - Rearrange _CPC structure documentation (Andy Shevchenko). - Drop an always true check from the ACPI thermal driver (Adam Borowski). - Add new "not charging" quirk for Lenovo ThinkPads to the ACPI battery driver (Thomas Weißschuh). * acpi-tables: ACPI: tables: Add AEST to the list of known table signatures * acpi-numa: ACPI: NUMA: Process hotpluggable memblocks when !CONFIG_MEMORY_HOTPLUG * acpi-sysfs: ACPI: sysfs: use default_groups in kobj_type * acpi-cppc: ACPI: CPPC: Amend documentation in the comments * acpi-thermal: ACPI: thermal: drop an always true check * acpi-battery: ACPI: battery: Add the ThinkPad "Not Charging" quirk
2022-01-10Merge branches 'acpi-x86', 'acpi-pmic' and 'acpi-dptf'Rafael J. Wysocki13-140/+220
Merge x86-specific ACPI updates, PMIC driver ACPI updates and a DPTF driver update for 5.17-rc1: - Rework the handling of device enumeration quirks in the x86-specific code and add new quirks for known-broken platforms (Hans de Goede). - Fix the handling of defective LPAT in the ACPI xpower PMIC driver and clean up some definitions of PMIC data structures (Hans de Goede). - Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar). * acpi-x86: ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTs ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helper mmc: sdhci-acpi: Use the new soc_intel_is_byt() helper mmc: sdhci-acpi: Remove special handling for GPD win/pocket devices ACPI / x86: Add PWM2 on the Xiaomi Mi Pad 2 to the always_present list ACPI / x86: Add not-present quirk for the PCI0.SDHB.BRC1 device on the GPD win ACPI / x86: Allow specifying acpi_device_override_status() quirks by path ACPI: Change acpi_device_always_present() into acpi_device_override_status() ACPI / x86: Drop PWM2 device on Lenovo Yoga Book from always present table * acpi-pmic: ACPI: PMIC: xpower: Fix _TMP ACPI errors ACPI: PMIC: allow drivers to provide a custom lpat_raw_to_temp() function ACPI: PMIC: constify all struct intel_pmic_opregion_data declarations * acpi-dptf: ACPI: DPTF: Update device ID in a comment
2022-01-10Merge branches 'acpi-ec' and 'acpi-processor'Rafael J. Wysocki5-143/+210
Merge ACPI EC driver updates and ACPI processor driver updates for 5.17-rc1: - Rework flushing of EC work while suspended to idle and clean up the handling of events in the ACPI EC driver (Rafael Wysocki). - Prohibit ec_sys module parameter write_support from being used when the system is locked down (Hans de Goede). - Make the ACPI processor thermal driver use cpufreq_cpu_get() to check for presence of cpufreq policy (Manfred Spraul). - Avoid unnecessary CPU cache flushing in the ACPI processor idle driver (Kirill A. Shutemov). - Replace kernel.h with the necessary inclusions in the ACPI processor driver (Andy Shevchenko). - Use swap() instead of open coding it in the ACPI processor idle driver (Guo Zhengkui). * acpi-ec: ACPI: EC: Mark the ec_sys write_support param as module_param_hw() ACPI: EC: Relocate acpi_ec_create_query() and drop acpi_ec_delete_query() ACPI: EC: Make the event work state machine visible ACPI: EC: Avoid queuing unnecessary work in acpi_ec_submit_event() ACPI: EC: Rename three functions ACPI: EC: Simplify locking in acpi_ec_event_handler() ACPI: EC: Rearrange the loop in acpi_ec_event_handler() ACPI: EC: Fold acpi_ec_check_event() into acpi_ec_event_handler() ACPI: EC: Pass one argument to acpi_ec_query() ACPI: EC: Call advance_transaction() from acpi_ec_dispatch_gpe() ACPI: EC: Rework flushing of EC work while suspended to idle * acpi-processor: ACPI: processor: thermal: avoid cpufreq_get_policy() ACPI: processor: idle: Only flush cache on entering C3 ACPI: processor idle: Use swap() instead of open coding it ACPI: processor: Replace kernel.h with the necessary inclusions
2022-01-10Merge branches 'acpi-scan', 'acpi-pm', 'acpi-power' and 'acpi-pci'Rafael J. Wysocki16-88/+213
Merge ACPI device enumeration updates, ACPI power management updates and PCI host bridge ACPI driver updates for 5.17-rc1: - Introduce acpi_fetch_acpi_dev() as a replacement for acpi_bus_get_device() and use it in the ACPI subsystem (Rafael Wysocki). - Avoid using _CID for device enumaration if _HID is missing or invalid (Rafael Wysocki). - Rework quirk handling during ACPI device enumeration and add some new quirks for known broken platforms (Hans de Goede). - Avoid unnecessary or redundant CPU cache flushing during system PM transitions (Kirill A. Shutemov). - Add PM debug messages related to power resources (Rafael Wysocki). - Fix kernel-doc comment in the PCI host bridge ACPI driver (Yang Li). * acpi-scan: serdev: Do not instantiate serdevs on boards with known bogus DSDT entries i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodes ACPI: Use acpi_fetch_acpi_dev() instead of acpi_bus_get_device() ACPI: scan: Introduce acpi_fetch_acpi_dev() ACPI: scan: Do not add device IDs from _CID if _HID is not valid * acpi-pm: ACPI: PM: Remove redundant cache flushing ACPI: PM: Avoid CPU cache flush when entering S4 * acpi-power: ACPI: PM: Emit debug messages when enabling/disabling wakeup power * acpi-pci: PCI/ACPI: Fix acpi_pci_osc_control_set() kernel-doc comment
2022-01-10ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl()Dan Carpenter1-0/+1
The "data_info" struct is copied to the user. It has a 4 byte struct hole after the last struct member so we need to memset that to avoid copying uninitialized stack data to the user. Fixes: b0013e037a8b ("ACPI: Introduce Platform Firmware Runtime Telemetry driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-08kbuild: do not quote string values in include/config/auto.confMasahiro Yamada1-1/+1
The previous commit fixed up all shell scripts to not include include/config/auto.conf. Now that include/config/auto.conf is only included by Makefiles, we can change it into a more Make-friendly form. Previously, Kconfig output string values enclosed with double-quotes (both in the .config and include/config/auto.conf): CONFIG_X="foo bar" Unlike shell, Make handles double-quotes (and single-quotes as well) verbatim. We must rip them off when used. There are some patterns: [1] $(patsubst "%",%,$(CONFIG_X)) [2] $(CONFIG_X:"%"=%) [3] $(subst ",,$(CONFIG_X)) [4] $(shell echo $(CONFIG_X)) These are not only ugly, but also fragile. [1] and [2] do not work if the value contains spaces, like CONFIG_X=" foo bar " [3] does not work correctly if the value contains double-quotes like CONFIG_X="foo\"bar" [4] seems to work better, but has a cost of forking a process. Anyway, quoted strings were always PITA for our Makefiles. This commit changes Kconfig to stop quoting in include/config/auto.conf. These are the string type symbols referenced in Makefiles or scripts: ACPI_CUSTOM_DSDT_FILE ARC_BUILTIN_DTB_NAME ARC_TUNE_MCPU BUILTIN_DTB_SOURCE CC_IMPLICIT_FALLTHROUGH CC_VERSION_TEXT CFG80211_EXTRA_REGDB_KEYDIR EXTRA_FIRMWARE EXTRA_FIRMWARE_DIR EXTRA_TARGETS H8300_BUILTIN_DTB INITRAMFS_SOURCE LOCALVERSION MODULE_SIG_HASH MODULE_SIG_KEY NDS32_BUILTIN_DTB NIOS2_DTB_SOURCE OPENRISC_BUILTIN_DTB SOC_CANAAN_K210_DTB_SOURCE SYSTEM_BLACKLIST_HASH_LIST SYSTEM_REVOCATION_KEYS SYSTEM_TRUSTED_KEYS TARGET_CPU UNUSED_KSYMS_WHITELIST XILINX_MICROBLAZE0_FAMILY XILINX_MICROBLAZE0_HW_VER XTENSA_VARIANT_NAME I checked them one by one, and fixed up the code where necessary. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-01-07ACPI: APD: Add a fmw property clk-nameAjit Kumar Pandey1-0/+10
Add a new device property to fetch clk-name from firmware. Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com> Link: https://lore.kernel.org/r/20211212180527.1641362-4-AjitKumar.Pandey@amd.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-01-07drivers: acpi: acpi_apd: Remove unused device property "is-rv"Ajit Kumar Pandey1-3/+0
Initially "is-rv" device property is added for 48MHz fixed clock support on Raven or RV architecture. It's unused now as we moved to pci device_id based selection to extend such support on other architectures. This change removed unused code from acpi driver. Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com> Link: https://lore.kernel.org/r/20211212180527.1641362-3-AjitKumar.Pandey@amd.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-01-06ACPI: pfr_update: Fix return value check in pfru_write()Yang Yingliang1-2/+2
In case of error, memremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 0db89fa243e5 ("ACPI: Introduce Platform Firmware Runtime Update device driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-04ACPI: PCC: Implement OperationRegion handler for the PCC Type 3 subtypeSudeep Holla4-0/+139
PCC OpRegion provides a mechanism to communicate with the platform directly from the AML. PCCT provides the list of PCC channel available in the platform, a subset or all of them can be used in PCC Opregion. This patch registers the PCC OpRegion handler before ACPI tables are loaded. This relies on the special context data passed to identify and set up the PCC channel before the OpRegion handler is executed for the first time. Typical PCC Opregion declaration looks like this: OperationRegion (PFRM, PCC, 2, 0x74) Field (PFRM, ByteAcc, NoLock, Preserve) { SIGN, 32, FLGS, 32, LEN, 32, CMD, 32, DATA, 800 } It contains four named double words followed by 100 bytes of buffer names DATA. ASL can fill out the buffer something like: /* Create global or local buffer */ Name (BUFF, Buffer (0x0C){}) /* Create double word fields over the buffer */ CreateDWordField (BUFF, 0x0, WD0) CreateDWordField (BUFF, 0x04, WD1) CreateDWordField (BUFF, 0x08, WD2) /* Fill the named fields */ WD0 = 0x50434300 SIGN = BUFF WD0 = 1 FLGS = BUFF WD0 = 0x10 LEN = BUFF /* Fill the payload in the DATA buffer */ WD0 = 0 WD1 = 0x08 WD2 = 0 DATA = BUFF /* Write to CMD field to trigger handler */ WD0 = 0x4404 CMD = BUFF This buffer is received by acpi_pcc_opregion_space_handler. This handler will fetch the complete buffer via internal_pcc_buffer. The setup handler will receive the special PCC context data which will contain the PCC channel index which used to set up the channel. The buffer pointer and length is saved in region context which is then used in the handler. (kernel test robot: Build failure with CONFIG_ACPI_DEBUGGER) Link: https://lore.kernel.org/r/202201041539.feAV0l27-lkp@intel.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-04ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTsHans de Goede1-3/+6
So far all of the tablets for which the skip i2c-client/serdev enumeration quirks have been added also all have broken ACPI AC / battery devices extend the existing quirks for these tablets to also skip the broken AC / battery devices. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-04ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helperHans de Goede3-83/+79
Some x86 ACPI boards have broken AC and battery ACPI devices in their ACPI tables. This is often tied to these devices using certain PMICs where the factory OS image seems to be using native charger and fuel-gauge drivers instead. So far both the AC and battery drivers have almost identical checks for these PMICs including both of them having a DMI based mechanism to force usage of the ACPI AC and battery drivers on some boards even though one of these PMICs is present, with the same 2 boards listed in both driver's DMI tables for this. The only difference is that the AC driver checks for 2 PMICs and the battery driver only for one. This has grown this way because the other (Whiskey Cove) PMIC is only used on a few boards (3 known boards) and although some of these do have non working ACPI battery devices, their _STA method always returns 0, but that really should not be relied on. This patch factors out the shared checks into a new acpi_quirk_skip_acpi_ac_and_battery() helper and moves the AC and battery drivers over to this new helper. Note the DMI table is shared with acpi_quirk_skip_i2c_client_enumeration() and acpi_quirk_skip_serdev_enumeration(), because boards needing DMI quirks for either of these typically also have broken AC and battery ACPI devices. The ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY quirk is not set yet on boards already in this DMI table, to avoid introducing any functional changes in this refactoring patch. Besided sharing the code between the AC and battery drivers this refactoring also moves this quirk handling to under #ifdef CONFIG_X86, removing this x86 specific code from non x86 ACPI builds. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-04Merge branch 'acpi-scan' into acpi-x86Rafael J. Wysocki15-82/+200
Merge recent device enumeration changes to satisfy dependencies.
2021-12-30ACPI: processor: thermal: avoid cpufreq_get_policy()Manfred Spraul1-3/+10
cpu_has_cpufreq() stores a 'struct cpufreq_policy' on the stack. Unfortunately, with debugging options enabled, the structure can be larger than 1024 bytes, which causes a compiler warning/error. (actually observed: 1184 bytes). Therefore: Switch to cpufreq_cpu_get(). Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpersHans de Goede1-0/+111
x86 ACPI boards which ship with only Android as their factory image usually declare a whole bunch of bogus I2C devs in their ACPI tables and sometimes there are issues with serdev devices on these boards too, e.g. the resource points to the wrong serdev_controller. Instantiating I2C / serdev devs for these bogus devs causes various issues, e.g. GPIO/IRQ resource conflicts because sometimes drivers do bind to them. The Android x86 kernel fork shipped on these devices has some special code to remove the bogus I2C clients (and serdevs are ignored completely). Introduce acpi_quirk_skip_i2c_client_enumeration() and acpi_quirk_skip_serdev_enumeration() helpers. Which can be used by the I2C/ serdev code to skip instantiating any I2C or serdev devs on broken boards. These 2 helpers are added to drivers/acpi/x86/utils.c so that the DMI table can be shared between the I2C and serdev code. Note these boards typically do actually have I2C and serdev devices, just different ones then the ones described in their DSDT. The devices which are actually present are manually instantiated by the drivers/platform/x86/x86-android-tablets.c kernel module. The new helpers are only build if CONFIG_X86_ANDROID_TABLETS is enabled, otherwise they are empty stubs to not unnecessarily grow the kernel size. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30ACPI: CPPC: Add CPPC enable register functionJinzhou Su1-0/+45
Add a new function to enable CPPC feature. This function will write Continuous Performance Control package EnableRegister field on the processor. CPPC EnableRegister register described in section 8.4.7.1 of ACPI 6.4: This element is optional. If supported, contains a resource descriptor with a single Register() descriptor that describes a register to which OSPM writes a One to enable CPPC on this processor. Before this register is set, the processor will be controlled by legacy mechanisms (ACPI Pstates, firmware, etc.). This register will be used for AMD processors to enable AMD P-State function instead of legacy ACPI P-States. Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30ACPI: CPPC: Check present CPUs for determining _CPC is validMario Limonciello1-1/+1
As this is a static check, it should be based upon what is currently present on the system. This makes probeing more deterministic. While local APIC flags field (lapic_flags) of cpu core in MADT table is 0, then the cpu core won't be enabled. In this case, _CPC won't be found in this core, and return back to _CPC invalid with walking through possible cpus (include disable cpus). This is not expected, so switch to check present CPUs instead. Reported-by: Jinzhou Su <Jinzhou.Su@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30ACPI: CPPC: Implement support for SystemIO registersSteven Noonan1-3/+49
According to the ACPI v6.2 (and later) specification, SystemIO can be used for _CPC registers. This teaches cppc_acpi how to handle such registers. This patch was tested using the amd_pstate driver on my Zephyrus G15 (model GA503QS) using the current version 410 BIOS, which uses a SystemIO register for the HighestPerformance element in _CPC. Signed-off-by: Steven Noonan <steven@valvesoftware.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodesHans de Goede1-3/+10
BCM4752 and LNV4752 ACPI nodes describe a Broadcom 4752 GPS module attached to an UART of the system. The GPS modules talk a custom protocol which only works with a closed- source Android gpsd daemon which knows this protocol. The ACPI nodes also describe GPIOs to turn the GPS on/off these are handled by the net/rfkill/rfkill-gpio.c code. This handling predates the addition of enumeration of ACPI instantiated serdevs to the kernel and was broken by that addition, because the ACPI scan code now no longer instantiates platform_device-s for these nodes. Rename the i2c_multi_instantiate_ids HID list to ignore_serial_bus_ids and add the BCM4752 and LNV4752 HIDs, so that rfkill-gpio gets a platform_device to bind to again; and so that a tty cdev for gpsd gets created for these. Fixes: e361d1f85855 ("ACPI / scan: Fix enumeration for special UART devices") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30PCI/ACPI: Fix acpi_pci_osc_control_set() kernel-doc commentYang Li1-1/+1
Add the description of @support and remove @req in acpi_pci_osc_control_set() kernel-doc comment to remove warnings found by running scripts/kernel-doc, which is caused by using 'make W=1'. drivers/acpi/pci_root.c:337: warning: Excess function parameter 'req' description in 'acpi_pci_osc_control_set' drivers/acpi/pci_root.c:337: warning: Function parameter or member 'support' not described in 'acpi_pci_osc_control_set' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 6bc779ee05d4 ("PCI/ACPI: Check for _OSC support in acpi_pci_osc_control_set()") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30ACPI: battery: Add the ThinkPad "Not Charging" quirkThomas Weißschuh1-0/+22
The EC/ACPI firmware on Lenovo ThinkPads used to report a status of "Unknown" when the battery is between the charge start and charge stop thresholds. On Windows, it reports "Not Charging" so the quirk has been added to also report correctly. Now the "status" attribute returns "Not Charging" when the battery on ThinkPads is not physicaly charging. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30acpi: Store CRC-32 hash of the _PLD in struct acpi_deviceHeikki Krogerus1-0/+16
Storing CRC-32 hash of the Physical Location of Device object (_PLD) with devices that have it. The hash is stored to a new struct acpi_device member "pld_crc". The hash makes it easier to find devices that share a location, as there is no need to evaluate the entire object every time. Knowledge about devices that share a location can be used in device drivers that need to know the connections to other components inside a system. USB3 ports will for example always share their location with a USB2 port. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20211223081620.45479-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30acpi: Export acpi_bus_typeHeikki Krogerus1-0/+1
So we can use bus_for_each_dev() and others from modules. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20211223081620.45479-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-28ACPI: sysfs: use default_groups in kobj_typeGreg Kroah-Hartman3-3/+6
There are currently 2 ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the ACPI sysfs code to use default_groups field which has been the preferred way since aa30f47cf666 ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>