Age | Commit message (Collapse) | Author | Files | Lines |
|
The commit 0ec4e55e9f57 ("ACPI: resources: Add checks for ACPI IRQ
override") introduces regression on some platforms, at least it makes
the UART can't get correct irq setting on two different platforms,
and it makes the kernel can't bootup on these two platforms.
This reverts commit 0ec4e55e9f571f08970ed115ec0addc691eda613.
Regression-discuss: https://bugzilla.kernel.org/show_bug.cgi?id=213031
Reported-by: PGNd <pgnet.dev@gmail.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The LPT stands for Lynxpoint PCH. However the driver is used on a few
Intel Atom SoCs. Rename it to reflect this in a way how another clock
driver, i.e. clk-pmc-atom, is called.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210722193450.35321-1-andriy.shevchenko@linux.intel.com
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
We need the driver-core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
AMD systems with uPEP HID AMDI007 should be using revision 2 and
the AMD method.
Fixes: 8fbd6c15ea0a ("ACPI: PM: Adjust behavior for field problems on AMD systems")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* acpi-utils:
ACPI: utils: Fix reference counting in for_each_acpi_dev_match()
|
|
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently it's possible to iterate over the dangling pointer in case the device
suddenly disappears. This may happen becase callers put it at the end of a loop.
Instead, let's move that call inside acpi_dev_get_next_match_dev().
Fixes: 803abec64ef9 ("media: ipu3-cio2: Add cio2-bridge to ipu3-cio2 driver")
Fixes: bf263f64e804 ("media: ACPI / bus: Add acpi_dev_get_next_match_dev() and helper macro")
Fixes: edbd1bc4951e ("efi/dev-path-parser: Switch to use for_each_acpi_dev_match()")
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
During a rework of initramfs code the INITRAMFS_COMPRESSION config
option was removed in commit 65e00e04e5ae. A leftover as a dependency
broke the config option ACPI_TABLE_OVERRIDE_VIA_ BUILTIN_INITRD that
is used to enable the overriding of ACPI tables from built-in initrd.
Fixing the dependency.
Fixes: 65e00e04e5ae ("initramfs: refactor the initramfs build rules")
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Instead of duplicating error codes here and there,
make get_header() to return error pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The sysfs_emit() function was introduced to make it less ambiguous
which function is preferred when writing to the output buffer in
a "show" callback [1].
Convert the GPIO library sysfs interface from sprintf() to sysfs_emit()
accordingly, as the latter is aware of the PAGE_SIZE buffer and correctly
returns the number of bytes written into the buffer.
No functional change intended.
[1] Documentation/filesystems/sysfs.rst
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Get rid of acpi_platform_notify() which is redundant and
make device_platform_notify() in the driver core call
acpi_device_notify() and acpi_device_notify_remove() directly.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
There is a name collision between acpi_device_notify() defined in
bus.c and another static function defined in glue.c.
Since the latter is going to be exported from that file, rename the
former to acpi_notify_device() and rename acpi_device_notify_fixed()
to follow the same naming pattern.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Since the return values of acpi_device_notify() and
acpi_device_notify_remove() are discarded by their only caller,
change their return type to void.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Make the code flow in acpi_device_notify() more straightforward and
make it use dev_dbg() and acpi_handle_debug() for printing debug
messages.
The only expected functional impact of this change is the content of
the debug messages printed by acpi_device_notify().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
We are preparing to add new Loongson (based on LoongArch, not MIPS)
support. LoongArch use ACPI other than DT as its boot protocol, so
add its support for ACPI_PROCESSOR/ACPI_NUMA.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The I2C-bus to the XPower AXP288 is shared between the Linux kernel and
the SoCs P-Unit. The P-Unit has a semaphore which the kernel must "lock"
before it may use the bus and while the kernel holds the semaphore the CPU
and GPU power-states must not be changed otherwise the system will freeze.
This is a complex process, which is quite expensive. This is all done by
iosf_mbi_block_punit_i2c_access(). To ensure that no unguarded I2C-bus
accesses happen, iosf_mbi_block_punit_i2c_access() gets called by the
I2C-bus-driver for every I2C transfer. Because this is so expensive it
is allowed to call iosf_mbi_block_punit_i2c_access() in a nested
fashion, so that higher-level code which does multiple I2C-transfers can
call it once for a group of transfers, turning the calls done by the
I2C-bus-driver into no-ops.
The default exec_mipi_pmic_seq_element implementation from
drivers/acpi/pmic/intel_pmic.c does a regmap_update_bits() call and
the involved registers are typically marked as volatile in the regmap,
so this leads to 2 I2C-bus accesses.
Add a XPower AXP288 specific implementation of exec_mipi_pmic_seq_element
which calls iosf_mbi_block_punit_i2c_access() calls before the
regmap_update_bits() call to avoid having to do the whole expensive
acquire P-Unit semaphore dance twice.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The I2C-bus to the XPower AXP288 is shared between the Linux kernel and
the SoCs P-Unit. The P-Unit has a semaphore which the kernel must "lock"
before it may use the bus and while the kernel holds the semaphore the CPU
and GPU power-states must not be changed otherwise the system will freeze.
This is a complex process, which is quite expensive. This is all done by
iosf_mbi_block_punit_i2c_access(). To ensure that no unguarded I2C-bus
accesses happen, iosf_mbi_block_punit_i2c_access() gets called by the
I2C-bus-driver for every I2C transfer. Because this is so expensive it
is allowed to call iosf_mbi_block_punit_i2c_access() in a nested
fashion, so that higher-level code which does multiple I2C-transfers can
call it once for a group of transfers, turning the calls done by the
I2C-bus-driver into no-ops.
Add iosf_mbi_block_punit_i2c_access() calls around groups of register
accesses, so that the P-Unit semaphore only needs to be taken once
for each group of register accesses.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These include fixes of the recently introduced support for the
Platform Runtime Mechanism (PRM) feature, a new backlight quirk, a
suspend-to-idle wakeup fix for non-Intel platforms and a fix for the
AMBA bus resource list in /proc/iomem.
Specifics:
- Fix up the recently added Platform Runtime Mechanism (PRM) support
by correnting a couple of implementation mistakes in it and adding
a Kconfig help text to describe it (Aubrey Li, Rafael Wysocki).
- Add backlight quirk for Dell Vostro 3350 (Hans de Goede).
- Avoid spurious wakeups from suspend-to-idle on non-Intel platforms
by restricting special EC GPE handling to the Intel ones (Mario
Limonciello).
- Modify the AMBA bus support in ACPI to avoid adding using resource
names in /proc/iomem (Liguang Zhang)"
* tag 'acpi-5.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Do not singal PRM support if not enabled
ACPI: Correct \_SB._OSC bit definition for PRM
ACPI: Kconfig: Provide help text for the ACPI_PRMT option
ACPI: PM: Only mark EC GPE for wakeup on Intel systems
ACPI: video: Add quirk for the Dell Vostro 3350
ACPI: AMBA: Fix resource name in /proc/iomem
|
|
* acpi-misc:
ACPI: AMBA: Fix resource name in /proc/iomem
* acpi-video:
ACPI: video: Add quirk for the Dell Vostro 3350
* acpi-prm:
ACPI: Do not singal PRM support if not enabled
ACPI: Correct \_SB._OSC bit definition for PRM
ACPI: Kconfig: Provide help text for the ACPI_PRMT option
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- SMMU Updates from Will Deacon:
- SMMUv3:
- Support stalling faults for platform devices
- Decrease defaults sizes for the event and PRI queues
- SMMUv2:
- Support for a new '->probe_finalize' hook, needed by Nvidia
- Even more Qualcomm compatible strings
- Avoid Adreno TTBR1 quirk for DB820C platform
- Intel VT-d updates from Lu Baolu:
- Convert Intel IOMMU to use sva_lib helpers in iommu core
- ftrace and debugfs supports for page fault handling
- Support asynchronous nested capabilities
- Various misc cleanups
- Support for new VIOT ACPI table to make the VirtIO IOMMU
available on x86
- Add the amd_iommu=force_enable command line option to enable
the IOMMU on platforms where they are known to cause problems
- Support for version 2 of the Rockchip IOMMU
- Various smaller fixes, cleanups and refactorings
* tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu/virtio: Enable x86 support
iommu/dma: Pass address limit rather than size to iommu_setup_dma_ops()
ACPI: Add driver for the VIOT table
ACPI: Move IOMMU setup code out of IORT
ACPI: arm64: Move DMA setup operations out of IORT
iommu/vt-d: Fix dereference of pointer info before it is null checked
iommu: Update "iommu.strict" documentation
iommu/arm-smmu: Check smmu->impl pointer before dereferencing
iommu/arm-smmu-v3: Remove unnecessary oom message
iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation
iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails
iommu/vt-d: Fix linker error on 32-bit
iommu/vt-d: No need to typecast
iommu/vt-d: Define counter explicitly as unsigned int
iommu/vt-d: Remove unnecessary braces
iommu/vt-d: Removed unused iommu_count in dmar domain
iommu/vt-d: Use bitfields for DMAR capabilities
iommu/vt-d: Use DEVICE_ATTR_RO macro
iommu/vt-d: Fix out-bounds-warning in intel/svm.c
iommu/vt-d: Add PRQ handling latency sampling
...
|
|
If the OS confirms PRM (Platform Runtime Mechanism) support through
the \_SB._OSC PRM bit, the BIOS may start relying on the presence of
PRM support in the OS, so prevent the PRM bit from being set in the
\_SB._OSC capabilities bitmask when PRM support is not built in so
as to avoid confusing the BIOS in that case.
Fixes: 60faa8f1ac6e ("ACPI: Add \_SB._OSC bit for PRM")
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
[ rjw: Rewrite subject and changelog, replace #ifdef with if (IS_ENABLED()) ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add missing help text for CONFIG_ACPI_PRMT.
Fixes: cefc7ca46235 ("ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When using s2idle on a variety of AMD notebook systems, they are
experiencing spurious events that the EC or SMU are in the wrong
state leading to a hard time waking up or higher than expected
power consumption.
These events only occur when the EC GPE is inadvertently set as a wakeup
source. Originally the EC GPE was only set as a wakeup source when using
the intel-vbtn or intel-hid drivers in commit 10a08fd65ec1 ("ACPI: PM:
Set up EC GPE for system wakeup from drivers that need it") but during
testing a reporter discovered that this was not enough for their ASUS
Zenbook UX430UNR/i7-8550U to wakeup by lid event or keypress.
Marking the EC GPE for wakeup universally resolved this for that
reporter in commit b90ff3554aa3 ("ACPI: PM: s2idle: Always set up EC GPE
for system wakeup").
However this behavior has lead to a number of problems:
* On both Lenovo T14 and P14s the keyboard wakeup doesn't work, and
sometimes the power button event doesn't work.
* On HP 635 G7 detaching or attaching AC during suspend will cause
the system not to wakeup
* On Asus vivobook to prevent detaching AC causing resume problems
* On Lenovo 14ARE05 to prevent detaching AC causing resume problems
* On HP ENVY x360 to prevent detaching AC causing resume problems
As there may be other Intel systems besides ASUS Zenbook UX430UNR/i7-8550U
that don't use intel-vbtn or intel-hid, avoid these problems by only
universally marking the EC GPE wakesource on non-AMD systems.
Link: https://patchwork.kernel.org/project/linux-pm/cover/5997740.FPbUVk04hV@kreacher/#22825489
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1230
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1629
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks in NAPI
context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support"
* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...
|
|
Pull block driver updates from Jens Axboe:
"Pretty calm round, mostly just NVMe and a bit of MD:
- NVMe updates (via Christoph)
- improve the APST configuration algorithm (Alexey Bogoslavsky)
- look for StorageD3Enable on companion ACPI device
(Mario Limonciello)
- allow selecting the network interface for TCP connections
(Martin Belanger)
- misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King,
Christoph)
- move the ACPI StorageD3 code to drivers/acpi/ and add quirks
for certain AMD CPUs (Mario Limonciello)
- zoned device support for nvmet (Chaitanya Kulkarni)
- fix the rules for changing the serial number in nvmet
(Noam Gottlieb)
- various small fixes and cleanups (Dan Carpenter, JK Kim,
Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert
Uytterhoeven, Daniel Wagner)
- MD updates (Via Song)
- iostats rewrite (Guoqing Jiang)
- raid5 lock contention optimization (Gal Ofri)
- Fall through warning fix (Gustavo)
- Misc fixes (Gustavo, Jiapeng)"
* tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits)
nvmet: use NVMET_MAX_NAMESPACES to set nn value
loop: Fix missing discard support when using LOOP_CONFIGURE
nvme.h: add missing nvme_lba_range_type endianness annotations
nvme: remove zeroout memset call for struct
nvme-pci: remove zeroout memset call for struct
nvmet: remove zeroout memset call for struct
nvmet: add ZBD over ZNS backend support
nvmet: add Command Set Identifier support
nvmet: add nvmet_req_bio put helper for backends
nvmet: add req cns error complete helper
block: export blk_next_bio()
nvmet: remove local variable
nvmet: use nvme status value directly
nvmet: use u32 type for the local variable nsid
nvmet: use u32 for nvmet_subsys max_nsid
nvmet: use req->cmd directly in file-ns fast path
nvmet: use req->cmd directly in bdev-ns fast path
nvmet: make ver stable once connection established
nvmet: allow mn change if subsys not discovered
nvmet: make sn stable once connection was established
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- New think-lmi driver adding support for changing Lenovo Thinkpad
BIOS settings from within Linux using the standard firmware-
attributes class sysfs API
- MS Surface aggregator-cdev now also supports forwarding events to
user-space (for debugging / new driver development purposes only)
- New intel_skl_int3472 driver this provides the necessary glue to
translate ACPI table information to GPIOs, regulators, etc. for
camera sensors on Intel devices with IPU3 attached MIPI cameras
- A whole bunch of other fixes + device-specific quirk additions
- New devm_work_autocancel() devm-helpers.h function"
* tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (83 commits)
platform/x86: dell-wmi-sysman: Change user experience when Admin/System Password is modified
platform/x86: intel_skl_int3472: Uninitialized variable in skl_int3472_handle_gpio_resources()
platform/x86: think-lmi: Move kfree(setting->possible_values) to tlmi_attr_setting_release()
platform/x86: think-lmi: Split current_value to reflect only the value
platform/x86: think-lmi: Fix issues with duplicate attributes
platform/x86: think-lmi: Return EINVAL when kbdlang gets set to a 0 length string
platform/x86: intel_cht_int33fe: Move to its own subfolder
platform/x86: intel_skl_int3472: Move to intel/ subfolder
platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()
platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_regulator()
platform/x86: intel_skl_int3472: Use ACPI GPIO resource directly
platform/x86: intel_skl_int3472: Fix dependencies (drop CLKDEV_LOOKUP)
platform/x86: intel_skl_int3472: Free ACPI device resources after use
platform/x86: Remove "default n" entries
platform/x86: ISST: Use numa node id for cpu pci dev mapping
platform/x86: ISST: Optimize CPU to PCI device mapping
tools/power/x86/intel-speed-select: v1.10 release
tools/power/x86/intel-speed-select: Fix uncore memory frequency display
extcon: extcon-max8997: Simplify driver using devm
extcon: extcon-max8997: Fix IRQ freeing at error path
...
|
|
The Dell Vostro 3350 ACPI video-bus device reports spurious
ACPI_VIDEO_NOTIFY_CYCLE events resulting in spurious KEY_SWITCHVIDEOMODE
events being reported to userspace (and causing trouble there).
Add a quirk setting the report_key_events mask to
REPORT_BRIGHTNESS_KEY_EVENTS so that the ACPI_VIDEO_NOTIFY_CYCLE
events will be ignored, while still reporting brightness up/down
hotkey-presses to userspace normally.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1911763
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In function amba_handler_attach(), dev->res.name is initialized by
amba_device_alloc. But when address_found is false, dev->res.name is
assigned to null value, which leads to wrong resource name display in
/proc/iomem, "<BAD>" is seen for those resources.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These unify device properties access in some pieces of code and make
related changes.
Specifics:
- Handle device properties with software node API in the ACPI IORT
table parsing code (Heikki Krogerus).
- Unify of_node access in the common device properties code, constify
the acpi_dma_supported() argument pointer and fix up CONFIG_ACPI=n
stubs of some functions related to device properties (Andy
Shevchenko)"
* tag 'devprop-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Unify access to of_node
ACPI: scan: Constify acpi_dma_supported() helper function
ACPI: property: Constify stubs for CONFIG_ACPI=n case
ACPI: IORT: Handle device properties with software node API
device property: Retrieve fwnode from of_node via accessor
|
|
* acpi-ec:
ACPI: EC: trust DSDT GPE for certain HP laptop
ACPI: EC: Make more Asus laptops use ECDT _GPE
* acpi-apei:
ACPI: APEI: fix synchronous external aborts in user-mode
ACPI: APEI: Don't warn if ACPI is disabled
* acpi-soc:
ACPI: LPSS: Use kstrtol() instead of simple_strtol()
* acpi-misc:
ACPI: NVS: fix doc warnings in nvs.c
ACPI: NUMA: fix typo in a comment
ACPI: OSL: Use DEFINE_RES_IO_NAMED() to simplify code
ACPI: bus: Call kobject_put() in acpi_init() error path
ACPI: bus: Remove unneeded assignment
ACPI: configfs: Replace ACPI_INFO() with pr_debug()
ACPI: ipmi: Remove address space handler in error path
ACPI: event: Remove redundant initialization of local variable
ACPI: sbshc: Fix fall-through warning for Clang
|
|
* acpi-dptf:
ACPI: DPTF: Add battery participant for Intel SoCs
* acpi-messages:
ACPI: Remove the macro PREFIX "ACPI: "
ACPI: sleep: Unify the message printing
ACPI: sbs: Unify the message printing
ACPI: scan: Unify the log message printing
ACPI: sbshc: Unify the message printing
ACPI: sysfs: Cleanup message printing
ACPI: reboot: Unify the message printing
ACPI: processor_throttling: Cleanup the printing messages
ACPI: processor_perflib: Cleanup print messages
ACPI: processor_thermal: Remove unused PREFIX for printing
ACPI: pci_root: Unify the message printing
ACPI: osl: Remove the duplicated PREFIX for message printing
ACPI: nvs: Unify the message printing
ACPI: glue: Clean up the printing messages
ACPI: event: Use pr_*() macros to replace printk()
ACPI: bus: Use pr_*() macros to replace printk()
ACPI: blacklist: Unify the message printing
ACPI: cmos_rtc: Using pr_fmt() and remove PREFIX
|
|
* acpi-prm:
ACPI: PRM: make symbol 'prm_module_list' static
ACPI: Add \_SB._OSC bit for PRM
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype
* acpi-sysfs:
ACPI: sysfs: Remove tailing return statement in void function
ACPI: sysfs: Use __ATTR_RO() and __ATTR_RW() macros
ACPI: sysfs: Sort headers alphabetically
ACPI: sysfs: Refactor param_get_trace_state() to drop dead code
ACPI: sysfs: Unify pattern of memory allocations
ACPI: sysfs: Allow bitmap list to be supplied to acpi_mask_gpe
ACPI: sysfs: Make sparse happy about address space in use
ACPI: sysfs: fix doc warnings in device_sysfs.c
ACPI: sysfs: Drop four redundant return statements
ACPI: sysfs: Fix a buffer overrun problem with description_show()
* acpi-x86:
x86/acpi: Switch to pr_xxx log functions
|
|
* acpi-pm:
ACPI: PM: postpone bringing devices to D0 unless we need them
ACPI: PM: Adjust behavior for field problems on AMD systems
ACPI: PM: s2idle: Add support for new Microsoft UUID
ACPI: PM: s2idle: Add support for multiple func mask
ACPI: PM: s2idle: Refactor common code
ACPI: PM: s2idle: Use correct revision id
ACPI: power: Use dev_dbg() to print some messages
ACPI: sleep: Fix acpi_pm_pre_suspend() kernel-doc
ACPI: power: Rework turning off unused power resources
ACPI: power: Save the last known state of each power resource
ACPI: power: Use u8 as the power resource state data type
ACPI: PM / fan: Put fan device IDs into separate header file
ACPI: PM: s2idle: Add missing LPS0 functions for AMD
* acpi-processor:
ACPI: processor_throttling: Fix several coding style issues
ACPI: processor_throttling: Remove redundant initialization of 'obj'
ACPI: processor idle: Fix up C-state latency if not ordered
* acpi-resources:
ACPI: resources: Add checks for ACPI IRQ override
|
|
* acpi-bus:
ACPI: Remove redundant clearing of context->ret.pointer from acpi_run_osc()
* acpi-scan:
ACPI: scan: Simplify acpi_table_events_fn()
ACPI: scan: Fix race related to dropping dependencies
ACPI: scan: Reorganize acpi_device_add()
ACPI: scan: Fix device object rescan in acpi_scan_clear_dep()
ACPI: scan: Make acpi_walk_dep_device_list()
ACPI: scan: Rearrange acpi_dev_get_first_consumer_dev_cb()
ACPI: scan: Define acpi_bus_put_acpi_device() as static inline
ACPI: scan: initialize local variable to avoid garbage being returned
ACPI: scan: Add function to fetch dependent of ACPI device
ACPI: scan: Extend acpi_walk_dep_device_list()
ACPI: scan: Rearrange dep_unmet initialization
* acpi-tables:
ACPI: tables: Add custom DSDT file as makefile prerequisite
ACPI: bgrt: Use sysfs_emit
ACPI: bgrt: Fix CFI violation
ACPI: tables: FPDT: Add missing acpi_put_table() in acpi_init_fpdt()
ACPI: tables: PPTT: Populate cache-id if provided by firmware
|
|
* acpica:
ACPICA: Add PRMT module header to facilitate parsing
ACPICA: Update version to 20210604
ACPICA: Add support for PlatformRtMechanism OperationRegion handler
ACPICA: iASL: add disassembler support for PRMT
ACPICA: Add the CFMWS structure definition to the CEDT table
ACPICA: Add defines for the CXL Host Bridge Structure (CHBS)
ACPICA: iASL: Add support for the BDAT ACPI table
ACPICA: Add _PLD panel positions
ACPICA: Use ACPI_FALLTHROUGH
ACPICA: iASL Table Compiler: Add full support for RGRT ACPI table
ACPICA: iASL: Add support for the SVKL table
ACPICA: iASL: Finish support for the IVRS ACPI table
ACPICA: Fix memory leak caused by _CID repair function
ACPICA: Add SVKL table headers
ACPICA: ACPI 6.4: MADT: add Multiprocessor Wakeup Mailbox Structure
|
|
'x86/amd', 'virtio' and 'core' into next
|
|
The ACPI Virtual I/O Translation Table describes topology of
para-virtual platforms, similarly to vendor tables DMAR, IVRS and IORT.
For now it describes the relation between virtio-iommu and the endpoints
it manages.
Three steps are needed to configure DMA of endpoints:
(1) acpi_viot_init(): parse the VIOT table, find or create the fwnode
associated to each vIOMMU device. This needs to happen after
acpi_scan_init(), because it relies on the struct device and their
fwnode to be available.
(2) When probing the vIOMMU device, the driver registers its IOMMU ops
within the IOMMU subsystem. This step doesn't require any
intervention from the VIOT driver.
(3) viot_iommu_configure(): before binding the endpoint to a driver,
find the associated IOMMU ops. Register them, along with the
endpoint ID, into the device's iommu_fwspec.
If step (3) happens before step (2), it is deferred until the IOMMU is
initialized, then retried.
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210618152059.1194210-4-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Extract the code that sets up the IOMMU infrastructure from IORT, since
it can be reused by VIOT. Move it one level up into a new
acpi_iommu_configure_id() function, which calls the IORT parsing
function which in turn calls the acpi_iommu_fwspec_init() helper.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210618152059.1194210-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Extract generic DMA setup code out of IORT, so it can be reused by VIOT.
Keep it in drivers/acpi/arm64 for now, since it could break x86
platforms that haven't run this code so far, if they have invalid
tables.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210618152059.1194210-2-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Currently ACPI power domain brings devices into D0 state in the "resume
early" phase. Normally this does not cause any issues, as powering up
happens quickly. However there are peripherals that have certain timing
requirements for powering on, for example some models of Elan
touchscreens need 300msec after powering up/releasing reset line before
they can accept commands from the host. Such devices will dominate
the time spent in early resume phase and cause increase in overall
resume time as we wait for early resume to complete before we can
proceed to the normal resume stage.
There are ways for a driver to indicate that it can tolerate device
being in the low power mode and that it knows how to power the device
back up when resuming, bit that requires changes to individual drivers
that may not really care about details of ACPI controlled power
management.
This change attempts to solve this issue at ACPI power domain level, by
postponing powering up device until we get to the normal resume stage,
unless there is early resume handler defined for the device, or device
does not declare any resume handlers, in which case we continue powering
up such devices early. This allows us to shave off several hundred
milliseconds of resume time on affected systems.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
A custom DSDT file is mostly used during development or debugging,
and in that case it is quite likely to want to rebuild the kernel
after changing ONLY the content of the DSDT.
This patch adds the custom DSDT as a prerequisite to tables.o
to ensure a rebuild if the DSDT file is updated. Make will merge
the prerequisites from multiple rules for the same target.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
sysfs_emit is preferred to snprintf for emitting values after
commit 2efc459d06f1 ("sysfs: Add sysfs_emit and sysfs_emit_at to format
sysfs output").
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
clang's Control Flow Integrity requires that every indirect call has a
valid target, which is based on the type of the function pointer. The
*_show() functions in this file are written as if they will be called
from dev_attr_show(); however, they will be called from
sysfs_kf_seq_show() because the files were created by
sysfs_create_group() and the sysfs ops are based on kobj_sysfs_ops
because of kobject_add_and_create(). Because the *_show() functions do
not match the type of the show() member in struct kobj_attribute, there
is a CFI violation.
$ cat /sys/firmware/acpi/bgrt/{status,type,version,{x,y}offset}}
1
0
1
522
307
$ dmesg | grep "CFI failure"
[ 267.761825] CFI failure (target: type_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[ 267.762246] CFI failure (target: xoffset_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[ 267.762584] CFI failure (target: status_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[ 267.762973] CFI failure (target: yoffset_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[ 267.763330] CFI failure (target: version_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
Convert these functions to the type of the show() member in struct
kobj_attribute so that there is no more CFI violation. Because these
functions are all so similar, combine them into a macro.
Fixes: d1ff4b1cdbab ("ACPI: Add support for exposing BGRT data")
Link: https://github.com/ClangBuiltLinux/linux/issues/1406
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On HP Pavilion Gaming Laptop 15-cx0xxx, the ECDT EC and DSDT EC share
the same port addresses but different GPEs. And the DSDT GPE is the
right one to use.
The current code duplicates DSDT EC with ECDT EC if the port addresses
are the same, and uses ECDT GPE as a result, which breaks this machine.
Introduce a new quirk for the HP laptop to trust the DSDT GPE,
and avoid duplicating even if the port addresses are the same.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209989
Reported-and-tested-by: Shao Fu, Chen <leo881003@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Notice that the table field of struct acpi_table_events_work is never
read and its event field is always equal to ACPI_TABLE_EVENT_LOAD, so
both of them are redundant.
Accordingly, drop struct acpi_table_events_work and use struct
work_struct directly instead of it, simplify acpi_scan_table_handler()
and rename it to acpi_scan_table_notify().
Moreover, make acpi_bus_table_handler() check the event code against
ACPI_TABLE_EVENT_LOAD before calling acpi_scan_table_notify(), so it
is not necessary to do that check in the latter.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some AMD Systems with uPEP _HID AMD004/AMDI005 have an off by one bug
in their function mask return. This means that they will call entrance
but not exit for matching functions.
Other AMD systems with this HID should use the Microsoft generic UUID.
AMD systems with uPEP HID AMDI006 should be using the Microsoft method.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This adds supports for _DSM notifications to the Microsoft UUID
described by Microsoft documentation for s2idle.
Link: https://docs.microsoft.com/en-us/windows-hardware/design/device-experiences/modern-standby-firmware-notifications
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Required for follow-up patch adding new UUID needing new function
mask.
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Refactor common code to prepare for upcoming changes.
* Remove unused struct.
* Print error before returning.
* Frees ACPI obj if _DSM type is not as expected.
* Treat lps0_dsm_func_mask as an integer rather than character
* Remove extra out_obj
* Move rev_id
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|