Age | Commit message (Collapse) | Author | Files | Lines |
|
Initial tests with the CXL CPER implementation identified that error
reports were being duplicated in the log and the trace event [1]. Then
it was discovered that the notification handler took sleeping locks
while the GHES event handling runs in spin_lock_irqsave() context [2]
While the duplicate reporting was fixed in v6.8-rc4, the fix for the
sleeping-lock-vs-atomic collision would enjoy more time to settle and
gain some test cycles. Given how late it is in the development cycle,
remove the CXL hookup for now and try again during the next merge
window.
Note that end result is that v6.8 does not emit CXL CPER payloads to the
kernel log, but this is in line with the CXL trend to move error
reporting to trace events instead of the kernel log.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: http://lore.kernel.org/r/20240108165855.00002f5a@Huawei.com [1]
Closes: http://lore.kernel.org/r/b963c490-2c13-4b79-bbe7-34c6568423c7@moroto.mountain [2]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Jonathan reports that CXL CPER events dump an extra generic error
message.
{1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
{1}[Hardware Error]: event severity: recoverable
{1}[Hardware Error]: Error 0, type: recoverable
{1}[Hardware Error]: section type: unknown, fbcd0a77-c260-417f-85a9-088b1621eba6
{1}[Hardware Error]: section length: 0x90
{1}[Hardware Error]: 00000000: 00000090 00000007 00000000 0d938086 ................
{1}[Hardware Error]: 00000010: 00100000 00000000 00040000 00000000 ................
...
CXL events were rerouted though the CXL subsystem for additional
processing. However, when that work was done it was missed that
cper_estatus_print_section() continued with a generic error message
which is confusing.
Teach CPER print code to ignore printing details of some section types.
Assign the CXL event GUIDs to this set to prevent confusing unknown
prints.
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Pull CXL (Compute Express Link) updates from Dan Williams:
"The bulk of this update is support for enumerating the performance
capabilities of CXL memory targets and connecting that to a platform
CXL memory QoS class. Some follow-on work remains to hook up this data
into core-mm policy, but that is saved for v6.9.
The next significant update is unifying how CXL event records (things
like background scrub errors) are processed between so called
"firmware first" and native error record retrieval. The CXL driver
handler that processes the record retrieved from the device mailbox is
now the handler for that same record format coming from an EFI/ACPI
notification source.
This also contains miscellaneous feature updates, like Get Timestamp,
and other fixups.
Summary:
- Add support for parsing the Coherent Device Attribute Table (CDAT)
- Add support for calculating a platform CXL QoS class from CDAT data
- Unify the tracing of EFI CXL Events with native CXL Events.
- Add Get Timestamp support
- Miscellaneous cleanups and fixups"
* tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (41 commits)
cxl/core: use sysfs_emit() for attr's _show()
cxl/pci: Register for and process CPER events
PCI: Introduce cleanup helpers for device reference counts and locks
acpi/ghes: Process CXL Component Events
cxl/events: Create a CXL event union
cxl/events: Separate UUID from event structures
cxl/events: Remove passing a UUID to known event traces
cxl/events: Create common event UUID defines
cxl/events: Promote CXL event structures to a core header
cxl: Refactor to use __free() for cxl_root allocation in cxl_endpoint_port_probe()
cxl: Refactor to use __free() for cxl_root allocation in cxl_find_nvdimm_bridge()
cxl: Fix device reference leak in cxl_port_perf_data_calculate()
cxl: Convert find_cxl_root() to return a 'struct cxl_root *'
cxl: Introduce put_cxl_root() helper
cxl/port: Fix missing target list lock
cxl/port: Fix decoder initialization when nr_targets > interleave_ways
cxl/region: fix x9 interleave typo
cxl/trace: Pass UUID explicitly to event traces
cxl/region: use %pap format to print resource_size_t
cxl/region: Add dev_dbg() detail on failure to allocate HPA space
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm
SMMU implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
Intel VT-d driver:
- Cleanup and refactoring
AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes"
* tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu: Don't reserve 0-length IOVA region
iommu/vt-d: Move inline helpers to header files
iommu/vt-d: Remove unused vcmd interfaces
iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through()
iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly
iommu/sva: Fix memory leak in iommu_sva_bind_device()
dt-bindings: iommu: rockchip: Add Rockchip RK3588
iommu/dma: Trace bounce buffer usage when mapping buffers
iommu/arm-smmu: Convert to domain_alloc_paging()
iommu/arm-smmu: Pass arm_smmu_domain to internal functions
iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED
iommu/arm-smmu: Convert to a global static identity domain
iommu/arm-smmu: Reorganize arm_smmu_domain_add_master()
iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent()
iommu/arm-smmu-v3: Add a type for the STE
iommu/arm-smmu-v3: disable stall for quiet_cd
iommu/qcom: restore IOMMU state if needed
iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
iommu/arm-smmu-qcom: Add missing GMU entry to match table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are the set of driver core and kernfs changes for 6.8-rc1.
Nothing major in here this release cycle, just lots of small cleanups
and some tweaks on kernfs that in the very end, got reverted and will
come back in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues"
* tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits)
Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock"
kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
class: fix use-after-free in class_register()
PM: clk: make pm_clk_add_notifier() take a const pointer
EDAC: constantify the struct bus_type usage
kernfs: fix reference to renamed function
driver core: device.h: fix Excess kernel-doc description warning
driver core: class: fix Excess kernel-doc description warning
driver core: mark remaining local bus_type variables as const
driver core: container: make container_subsys const
driver core: bus: constantify subsys_register() calls
driver core: bus: make bus_sort_breadthfirst() take a const pointer
kernfs: d_obtain_alias(NULL) will do the right thing...
driver core: Better advertise dev_err_probe()
kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy()
initramfs: Expose retained initrd as sysfs file
fs/kernfs/dir: obey S_ISGID
kernel/cgroup: use kernfs_create_dir_ns()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add support for new MADT flags to ACPICA, constify the PNP bus
type structure and add new ACPI IRQ management quirks.
Specifics:
- Make pnp_bus_type const (Greg Kroah-Hartman)
- Add ACPI IRQ management quirks for ASUS ExpertBook B1502CGA and
ASUS Vivobook E1504GA and E1504GAB (Ben Mayo, Michael Maltsev)
- Add new MADT GICC/GICR/ITS non-coherent flags and GICC online
capable bit handling to ACPICA (Lorenzo Pieralisi)"
* tag 'acpi-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: MADT: Add new MADT GICC/GICR/ITS non-coherent flags handling
ACPICA: MADT: Add GICC online capable bit handling
ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CGA
ACPI: resource: Add DMI quirks for ASUS Vivobook E1504GA and E1504GAB
PNP: make pnp_bus_type const
|
|
Merge a PNP change, new ACPI IRQ management quirks and a small ACPICA
code update for 6.8-rc1:
- Make pnp_bus_type const (Greg Kroah-Hartman).
- Add ACPI IRQ management quirks for ASUS ExpertBook B1502CGA and ASUS
Vivobook E1504GA and E1504GAB (Ben Mayo, Michael Maltsev).
- Add new MADT GICC/GICR/ITS non-coherent flags and GICC online capable
bit handling to ACPICA (Lorenzo Pieralisi).
* pnp:
PNP: make pnp_bus_type const
* acpi-resource:
ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CGA
ACPI: resource: Add DMI quirks for ASUS Vivobook E1504GA and E1504GAB
* acpica:
ACPICA: MADT: Add new MADT GICC/GICR/ITS non-coherent flags handling
ACPICA: MADT: Add GICC online capable bit handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny:
"A mix of bug fixes and updates to interfaces used by nvdimm:
- Updates to interfaces include:
Use the new scope based management
Remove deprecated ida interfaces
Update to sysfs_emit()
- Fixup kdoc comments"
* tag 'libnvdimm-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
acpi/nfit: Use sysfs_emit() for all attributes
nvdimm/namespace: fix kernel-doc for function params
nvdimm/dimm_devs: fix kernel-doc for function params
nvdimm/btt: fix btt_blk_cleanup() kernel-doc
nvdimm-btt: simplify code with the scope based resource management
nvdimm: Remove usage of the deprecated ida_simple_xx() API
ACPI: NFIT: Use cleanup.h helpers instead of devm_*()
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- reduce area lock contention for non-primary IO TLB pools (Petr
Tesarik)
- don't store redundant offsets in the dma_ranges stuctures (Robin
Murphy)
- clear dev->dma_mem when freeing per-device pools (Joakim Zhang)
* tag 'dma-mapping-6.8-2024-01-08' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: clear dev->dma_mem to NULL after freeing it
swiotlb: reduce area lock contention for non-primary IO TLB pools
dma-mapping: don't store redundant offsets
|
|
Pick up the CPER to CXL driver integration work for v6.8. Some
additional cleanup of cper_estatus_print() messages is needed, but that
is to be handled incrementally.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Intel PMC / PMT / TPMI / uncore-freq / vsec improvements and new
platform support
- AMD PMC / PMF improvements and new platform support
- AMD ACPI based Wifi band RFI mitigation feature (WBRF)
- WMI bus driver cleanups and improvements (Armin Wolf)
- acer-wmi Predator PHN16-71 support
- New Silicom network appliance EC LEDs / GPIOs driver
* tag 'platform-drivers-x86-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (96 commits)
platform/x86/amd/pmc: Modify SMU message port for latest AMD platform
platform/x86/amd/pmc: Add 1Ah family series to STB support list
platform/x86/amd/pmc: Add idlemask support for 1Ah family
platform/x86/amd/pmc: call amd_pmc_get_ip_info() during driver probe
platform/x86/amd/pmc: Add VPE information for AMDI000A platform
platform/x86/amd/pmc: Send OS_HINT command for AMDI000A platform
platform/x86/amd/pmf: Return a status code only as a constant in two functions
platform/x86/amd/pmf: Return directly after a failed apmf_if_call() in apmf_sbios_heartbeat_notify()
platform/x86: wmi: linux/wmi.h: fix Excess kernel-doc description warning
platform/x86/intel/pmc: Add missing extern
platform/x86/intel/pmc/lnl: Add GBE LTR ignore during suspend
platform/x86/intel/pmc/arl: Add GBE LTR ignore during suspend
platform/x86: intel-uncore-freq: Add additional client processors
platform/x86: Remove "X86 PLATFORM DRIVERS - ARCH" from MAINTAINERS
platform/x86: hp-bioscfg: Removed needless asm-generic
platform/x86/intel/pmc: Add Lunar Lake M support to intel_pmc_core driver
platform/x86/intel/pmc: Add Arrow Lake S support to intel_pmc_core driver
platform/x86/intel/pmc: Add ssram_init flag in PMC discovery in Meteor Lake
platform/x86/intel/pmc: Move common code to core.c
platform/x86/intel/pmc: Add PSON residency counter for Alder Lake
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add support for the D1/T113s THS controller to the sun8i driver
and a DT-based mechanism for platforms to indicate a preference to
reboot (instead of shutting down) on crossing a critical trip point,
fix issues, make other improvements (in the IPA governor, the Intel
HFI driver, the exynos driver and the thermal netlink interface among
other places) and clean up code.
One long-standing issue addressed here is that trip point crossing
notifications sent to user space might be unreliable due to the
incorrect handling of trip point hysteresis in the thermal core:
multiple notifications might be sent for the same event or there might
be events without any notification at all.
Specifics:
- Add dynamic thresholds for trip point crossing detection to prevent
trip point crossing notifications from being sent at incorrect
times or not at all in some cases (Rafael J. Wysocki)
- Fix synchronization issues related to the resume of thermal zones
during a system-wide resume and allow thermal zones to be resumed
concurrently (Rafael J. Wysocki)
- Modify the thermal zone unregistration to wait for the given zone
to go away completely before returning to the caller and rework the
sysfs interface for trip points on top of that (Rafael J. Wysocki)
- Fix a possible NULL pointer dereference in thermal zone
registration error path (Rafael J. Wysocki)
- Clean up the IPA thermal governor and modify it (with the help of a
new governor callback) to avoid allocating and freeing memory every
time its throttling callback is invoked (Lukasz Luba)
- Make the IPA thermal governor handle thermal instance weight
changes via sysfs correctly (Lukasz Luba)
- Update the thermal netlink code to avoid sending messages if there
are no recipients (Stanislaw Gruszka)
- Convert Mediatek Thermal to the json-schema (Rafał Miłecki)
- Fix thermal DT bindings issue on Loongson (Binbin Zhou)
- Fix returning NULL instead of -ENODEV during thermal probe on
Loogsoon (Binbin Zhou)
- Add thermal DT binding for tsens on the SM8650 platform (Neil
Armstrong)
- Add reboot on the critical trip point crossing option feature
(Fabio Estevam)
- Use DEFINE_SIMPLE_DEV_PM_OPS do define PM functions for thermal
suspend/resume on AmLogic (Uwe Kleine-König)
- Add D1/T113s THS controller support to the Sun8i thermal control
driver (Maxim Kiselev)
- Fix example in the thermal DT binding for QCom SPMI (Johan Hovold)
- Fix compilation warning in the tmon utility (Florian Eckert)
- Add support for interrupt-based thermal configuration on Exynos
along with a set of related cleanups (Mateusz Majewski)
- Make the Intel HFI thermal driver enable an HFI instance (eg.
processor package) from its first online CPU and disable it when
the last CPU in it goes offline (Ricardo Neri)
- Fix a kernel-doc warning and a spello in the cpuidle_cooling
thermal driver (Randy Dunlap)
- Move the .get_temp() thermal zone callback presence check to the
thermal zone registration code (Daniel Lezcano)
- Use the for_each_trip() macro for trip points table walks in a few
places in the thermal core (Rafael J. Wysocki)
- Make all trip point updates (via sysfs as well as from the platform
firmware) trigger trip change notifications (Rafael J. Wysocki)
- Drop redundant code from the thermal core and make one function in
it take a const pointer argument (Rafael J. Wysocki)"
* tag 'thermal-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
thermal: trip: Constify thermal zone argument of thermal_zone_trip_id()
thermal: intel: hfi: Disable an HFI instance when all its CPUs go offline
thermal: intel: hfi: Enable an HFI instance from its first online CPU
thermal: intel: hfi: Refactor enabling code into helper functions
thermal/drivers/exynos: Use set_trips ops
thermal/drivers/exynos: Use BIT wherever possible
thermal/drivers/exynos: Split initialization of TMU and the thermal zone
thermal/drivers/exynos: Stop using the threshold mechanism on Exynos 4210
thermal/drivers/exynos: Simplify regulator (de)initialization
thermal/drivers/exynos: Handle devm_regulator_get_optional return value correctly
thermal/drivers/exynos: Wwitch from workqueue-driven interrupt handling to threaded interrupts
thermal/drivers/exynos: Drop id field
thermal/drivers/exynos: Remove an unnecessary field description
tools/thermal/tmon: Fix compilation warning for wrong format
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names
thermal/drivers/sun8i: Add D1/T113s THS controller support
dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
thermal: amlogic: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
thermal: amlogic: Make amlogic_thermal_disable() return void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"From the new features standpoint, the most significant change here is
the addition of CSI-2 and MIPI DisCo for Imaging support to the ACPI
device enumeration code that will allow MIPI cameras to be enumerated
through the platform firmware on systems using ACPI.
Also significant is the switch-over to threaded interrupt handlers for
the ACPI SCI and the dedicated EC interrupt (on systems where the
former is not used) which essentially allows all ACPI code to run with
local interrupts enabled. That should improve responsiveness
significantly on systems where multiple GPEs are enabled and the
handling of one SCI involves many I/O address space accesses which
previously had to be carried out in one go with disabled interrupts on
the local CPU.
Apart from the above, the ACPI thermal zone driver will use the
Thermal fast Sampling Period (_TFP) object if available, which should
allow temperature changes to be followed more accurately on some
systems, the ACPI Notify () handlers can run on all CPUs (not just on
CPU0), which should generally speed up the processing of events
signaled through the ACPI SCI, and the ACPI power button driver will
trigger wakeup key events via the input subsystem (on systems where it
is a system wakeup device)
In addition to that, there are the usual bunch of fixes and cleanups.
Specifics:
- Add CSI-2 and DisCo for Imaging support to the ACPI device
enumeration code (Sakari Ailus, Rafael J. Wysocki)
- Adjust the cpufreq thermal reduction algorithm in the ACPI
processor driver for Tegra241 (Srikar Srimath Tirumala, Arnd
Bergmann)
- Make acpi_proc_quirk_mwait_check() x86-specific (Rafael J. Wysocki)
- Switch over ACPI to using a threaded interrupt handler for the SCI
(Rafael J. Wysocki)
- Allow ACPI Notify () handlers to run on all CPUs and clean up the
ACPI interface for deferred events processing (Rafael J. Wysocki)
- Switch over the ACPI EC driver to using a threaded handler for the
dedicated IRQ on systems without the EC GPE (Rafael J. Wysocki)
- Adjust code using ACPICA spinlocks and the ACPI EC driver spinlock
to keep local interrupts on (Rafael J. Wysocki)
- Adjust the USB4 _OSC handshake to correctly handle cases in which
certain types of OS control are denied by the platform (Mika
Westerberg)
- Correct and clean up the generic function for parsing ACPI
data-only tables with array structure (Yuntao Wang)
- Modify acpi_dev_uid_match() to support different types of its
second argument and adjust its users accordingly (Raag Jadav)
- Clean up code related to acpi_evaluate_reference() and ACPI device
lists (Rafael J. Wysocki)
- Use generic ACPI helpers for evaluating trip point temperature
objects in the ACPI thermal zone driver (Rafael J. Wysockii, Arnd
Bergmann)
- Add Thermal fast Sampling Period (_TFP) support to the ACPI thermal
zone driver (Jeff Brasen)
- Modify the ACPI LPIT table handling code to avoid u32
multiplication overflows in state residency computations (Nikita
Kiryushin)
- Drop an unused helper function from the ACPI backlight (video)
driver and add a clarifying comment to it (Hans de Goede)
- Update the ACPI backlight driver to avoid using uninitialized
memory in some cases (Nikita Kiryushin)
- Add ACPI backlight quirk for the Colorful X15 AT 23 laptop (Yuluo
Qiu)
- Add support for vendor-defined error types to the ACPI APEI error
injection code (Avadhut Naik)
- Adjust APEI to properly set MF_ACTION_REQUIRED on synchronous
memory failure events, so they are handled differently from the
asynchronous ones (Shuai Xue)
- Fix NULL pointer dereference check in the ACPI extlog driver
(Prarit Bhargava)
- Adjust the ACPI extlog driver to clear the Extended Error Log
status when RAS_CEC handled the error (Tony Luck)
- Add IRQ override quirks for some Infinity laptops and for TongFang
GMxXGxx (David McFarland, Hans de Goede)
- Clean up the ACPI NUMA code and fix it to ensure that fake_pxm is
not the same as one of the real pxm values (Yuntao Wang)
- Fix the fractional clock divider flags in the ACPI LPSS (Intel SoC)
driver so as to prevent miscalculation of the values in the clock
divider (Andy Shevchenko)
- Adjust comments in the ACPI watchdog driver to prevent kernel-doc
from complaining during documentation builds (Randy Dunlap)
- Make the ACPI button driver send wakeup key events to user space in
addition to power button events on systems that can be woken up by
the power button (Ken Xue)
- Adjust pnpacpi_parse_allocated_vendor() to use memcpy() on a full
structure field (Dmitry Antipov)"
* tag 'acpi-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits)
ACPI: resource: Add Infinity laptops to irq1_edge_low_force_override
ACPI: button: trigger wakeup key events
ACPI: resource: Add another DMI match for the TongFang GMxXGxx
ACPI: EC: Use a spin lock without disabing interrupts
ACPI: EC: Use a threaded handler for dedicated IRQ
ACPI: OSL: Use spin locks without disabling interrupts
ACPI: APEI: set memory failure flags as MF_ACTION_REQUIRED on synchronous events
ACPI: utils: Introduce helper for _DEP list lookup
ACPI: utils: Fix white space in struct acpi_handle_list definition
ACPI: utils: Refine acpi_handle_list_equal() slightly
ACPI: utils: Return bool from acpi_evaluate_reference()
ACPI: utils: Rearrange in acpi_evaluate_reference()
ACPI: arm64: export acpi_arch_thermal_cpufreq_pctg()
ACPI: extlog: Clear Extended Error Log status when RAS_CEC handled the error
ACPI: LPSS: Fix the fractional clock divider flags
ACPI: NUMA: Fix the logic of getting the fake_pxm value
ACPI: NUMA: Optimize the check for the availability of node values
ACPI: NUMA: Remove unnecessary check in acpi_parse_gi_affinity()
ACPI: watchdog: fix kernel-doc warnings
ACPI: extlog: fix NULL pointer dereference check
...
|
|
BIOS can configure memory devices as firmware first. This will send CXL
events to the firmware instead of the OS. The firmware can then send
these events to the OS via UEFI.
UEFI v2.10 section N.2.14 defines a Common Platform Error Record (CPER)
format for CXL Component Events. The format is mostly the same as the
CXL Common Event Record Format. The difference is the use of a GUID in
the Section Type rather than a UUID as part of the event itself.
Add GHES support to detect CXL CPER records and call a registered
callback with the event.
A notifier chain was considered for the callback but the complexity did
not justify the use case as only the CXL subsystem requires this event.
Enforce that only one callback can be registered at any time.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-7-1bb8a4ca2c7a@intel.com
[djbw: fixup checkpatch errors]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Like the ASUS ExpertBook B1502CBA and various ASUS laptops, the
ASUS ExpertBook B1502CGA has an ACPI DSDT table that describes IRQ 1 as
ActiveLow while the kernel overrides it to Edge_High.
$ sudo dmesg | grep DMI
[ 0.000000] DMI: ASUSTeK COMPUTER INC. ASUS EXPERTBOOK B1502CGA_B1502CGA/B1502CGA, BIOS B1502CGA.303 06/05/2023
$ grep -A 40 PS2K dsdt.dsl | grep IRQ -A 1
IRQ (Level, ActiveLow, Exclusive, )
{1}
This prevents the keyboard from working. To fix this issue, add this laptop
to the skip_override_table so that the kernel does not override IRQ 1.
Signed-off-by: Michael Maltsev <mekosko@projectyo.network>
[ rjw: rebase, replace .ident field with a comment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Asus Vivobook E1504GA and E1504GAB notebooks are affected by bug #216158
(DSDT specifies the kbd IRQ as level active-low and using the override
changes this to rising edge, stopping the keyboard from working).
Users of these notebooks do not have a working keyboard unless they add
their DMI information to the struct irq1_level_low_skip_override array
and compile a custom kernel.
Add support for these computers to the Linux kernel without requiring
the end-user to recompile the kernel.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216158
Signed-off-by: Ben Mayo <benny1091@gmail.com>
[ rjw: Link tag, subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge ACPI resources management quirks, ACPI NUMA updates, an ACPI LPSS
(Intel SoC) driver update and an ACPI watchdog driver fixup for 6.8-rc1:
- Add IRQ override quirks for some Infinity laptops and for TongFang
GMxXGxx (David McFarland, Hans de Goede).
- Clean up the ACPI NUMA code and fix it to ensure that fake_pxm is not
the same as one of the real pxm values (Yuntao Wang).
- Fix the fractional clock divider flags in the ACPI LPSS (Intel SoC)
driver so as to prevent miscalculation of the values in the clock
divider (Andy Shevchenko).
- Adjust comments in the ACPI watchdog driver to prevent kernel-doc
from complaining during documentation builds (Randy Dunlap).
* acpi-resource:
ACPI: resource: Add Infinity laptops to irq1_edge_low_force_override
ACPI: resource: Add another DMI match for the TongFang GMxXGxx
* acpi-numa:
ACPI: NUMA: Fix the logic of getting the fake_pxm value
ACPI: NUMA: Optimize the check for the availability of node values
ACPI: NUMA: Remove unnecessary check in acpi_parse_gi_affinity()
* acpi-soc:
ACPI: LPSS: Fix the fractional clock divider flags
* acpi-misc:
ACPI: watchdog: fix kernel-doc warnings
|
|
Merge an ACPI power management change, ACPI backlight driver changes, APEI
updates and ACPI extlog driver changes for 6.8-rc1:
- Modify the ACPI LPIT table handling code to avoid u32 multiplication
overflows in state residency computations (Nikita Kiryushin).
- Drop an unused helper function from the ACPI backlight (video) driver
and add a clarifying comment to it (Hans de Goede).
- Update the ACPI backlight driver to avoid using uninitialized memory
in some cases (Nikita Kiryushin).
- Add ACPI backlight quirk for the Colorful X15 AT 23 laptop (Yuluo
Qiu).
- Add support for vendor-defined error types to the ACPI APEI error
injection code (Avadhut Naik).
- Adjust APEI to properly set MF_ACTION_REQUIRED on synchronous memory
failure events, so they are handled differently from the asynchronous
ones (Shuai Xue).
- Fix NULL pointer dereference check in the ACPI extlog driver (Prarit
Bhargava).
- Adjust the ACPI extlog driver to clear the Extended Error Log status
when RAS_CEC handled the error (Tony Luck).
* acpi-pm:
ACPI: LPIT: Avoid u32 multiplication overflow
* acpi-video:
ACPI: video: Add quirk for the Colorful X15 AT 23 Laptop
ACPI: video: check for error while searching for backlight device parent
ACPI: video: Drop should_check_lcd_flag()
ACPI: video: Add comment about acpi_video_backlight_use_native() usage
* acpi-apei:
ACPI: APEI: set memory failure flags as MF_ACTION_REQUIRED on synchronous events
ACPI: APEI: EINJ: Add support for vendor defined error types
platform/chrome: cros_ec_debugfs: Fix permissions for panicinfo
fs: debugfs: Add write functionality to debugfs blobs
ACPI: APEI: EINJ: Refactor available_error_type_show()
* acpi-extlog:
ACPI: extlog: Clear Extended Error Log status when RAS_CEC handled the error
ACPI: extlog: fix NULL pointer dereference check
|
|
Merge ACPI thermal zone driver updates for 6.8-rc1:
- Use generic ACPI helpers for evaluating trip point temperature
objects in the ACPI thermal zone driver (Rafael J. Wysockii, Arnd
Bergmann).
- Add Thermal fast Sampling Period (_TFP) support to the ACPI thermal
zone driver (Jeff Brasen).
* acpi-thermal:
ACPI: thermal_lib: include "internal.h" for function prototypes
ACPI: thermal: Add Thermal fast Sampling Period (_TFP) support
ACPI: thermal: Use library functions to obtain trip point temperature values
ACPI: thermal_lib: Add functions returning temperature in deci-Kelvin
thermal: ACPI: Move the ACPI thermal library to drivers/acpi/
|
|
Merge ACPI utility functions updates for 6.8-rc1:
- Modify acpi_dev_uid_match() to support different types of its second
argument and adjust its users accordingly (Raag Jadav).
- Clean up code related to acpi_evaluate_reference() and ACPI device
lists (Rafael J. Wysocki).
* acpi-utils:
ACPI: utils: Introduce helper for _DEP list lookup
ACPI: utils: Fix white space in struct acpi_handle_list definition
ACPI: utils: Refine acpi_handle_list_equal() slightly
ACPI: utils: Return bool from acpi_evaluate_reference()
ACPI: utils: Rearrange in acpi_evaluate_reference()
perf: arm_cspmu: drop redundant acpi_dev_uid_to_integer()
efi: dev-path-parser: use acpi_dev_uid_match() for matching _UID
ACPI: LPSS: use acpi_dev_uid_match() for matching _UID
ACPI: bus: update acpi_dev_hid_uid_match() to support multiple types
ACPI: bus: update acpi_dev_uid_match() to support multiple types
|
|
Merge low-level ACPICA interface changes, an _SB-scope _OSC handshake
update and a data-only ACPI tables parsing code update for 6.8-rc1:
- Switch over ACPI to using a threaded interrupt handler for the
SCI (Rafael J. Wysocki).
- Allow ACPI Notify () handlers to run on all CPUs and clean up the
ACPI interface for deferred events processing (Rafael J. Wysocki).
- Switch over the ACPI EC driver to using a threaded handler for the
dedicated IRQ on systems without the EC GPE (Rafael J. Wysocki).
- Adjust code using ACPICA spinlocks and the ACPI EC driver spinlock to
keep local interrupts on (Rafael J. Wysocki).
- Adjust the USB4 _OSC handshake to correctly handle cases in which
certain types of OS control are denied by the platform (Mika
Westerberg).
- Correct and clean up the generic function for parsing ACPI data-only
tables with array structure (Yuntao Wang).
* acpi-osl:
ACPI: EC: Use a spin lock without disabing interrupts
ACPI: EC: Use a threaded handler for dedicated IRQ
ACPI: OSL: Use spin locks without disabling interrupts
ACPI: OSL: Allow Notify () handlers to run on all CPUs
ACPI: OSL: Rearrange workqueue selection in acpi_os_execute()
ACPI: OSL: Rework error handling in acpi_os_execute()
ACPI: OSL: Use a threaded interrupt handler for SCI
* acpi-bus:
ACPI: Run USB4 _OSC() first with query bit set
* acpi-tables:
ACPI: tables: Correct and clean up the logic of acpi_parse_entries_array()
|
|
Merge ACPI device enumeration updates and ACPI processor driver updates
for 6.8-rc1:
- Add CSI-2 and DisCo for Imaging support to the ACPI device
enumeration code (Sakari Ailus, Rafael J. Wysocki).
- Adjust the cpufreq thermal reduction algorithm in the ACPI processor
driver for Tegra241 (Srikar Srimath Tirumala, Arnd Bergmann).
- Make acpi_proc_quirk_mwait_check() x86-specific (Rafael J. Wysocki).
* acpi-scan:
ACPI: scan: Fix an error message in DisCo for Imaging support
ACPI: property: Replicate DT-aligned u32 properties from DisCo for Imaging
ACPI: property: Dig "rotation" property for devices with CSI2 _CRS
ACPI: scan: Extract MIPI DisCo for Imaging data into swnodes
device property: Add SOFTWARE_NODE() macro for defining software nodes
ACPI: scan: Extract _CRS CSI-2 connection information into swnodes
ACPI: scan: Extract CSI-2 connection graph from _CRS
ACPI: property: Support using strings in reference properties
* acpi-processor:
ACPI: arm64: export acpi_arch_thermal_cpufreq_pctg()
ACPI: processor: reduce CPUFREQ thermal reduction pctg for Tegra241
ACPI: processor: Provide empty stub of acpi_proc_quirk_mwait_check()
|
|
sysfs_emit() properly handles the PAGE_SIZE limitation of populating
sysfs attribute buffers. Clean up the deprecated usage of sprintf() in
all of nfit's sysfs show() handlers.
Reported-by: Ben Dooks <ben.dooks@codethink.co.uk>
Closes: http://lore.kernel.org/0d1bf461-d9e8-88bc-b7e2-b03b56594213@codethink.co.uk
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170303851337.2238503.5103082574938957743.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
A user reported a keyboard problem similar to ones reported with other
Zen laptops, on an Infinity E15-5A165-BM.
Add board name matches for this model and one (untested) close relative
to irq1_edge_low_force_override.
Link: https://lemmy.ml/post/9864736
Link: https://www.infinitygaming.com.au/bios/
Link: https://lore.kernel.org/linux-acpi/20231006123304.32686-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
'x86/vt-d', 'x86/amd' and 'core' into next
|
|
The new cleanup.h facilities that arrived in v6.5-rc1 can replace the
the usage of devm semantics in acpi_nfit_init_interleave_set(). That
routine appears to only be using devm to avoid goto statements. The
new __free() annotation at variable declaration time can achieve the same
effect more efficiently.
There is no end user visible side effects of this patch, I was
motivated to send this cleanup to practice using the new helpers.
Suggested-by: Dave Jiang <dave.jiang@intel.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Link: https://lore.kernel.org/r/20231017082905.1673316-1-michal.wilczynski@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
Andorid can wakeup from various wakeup sources, but only several wakeup
sources can wake up screen with right events(POWER, WAKEUP) from input
device.
Regarding pressing acpi power button, it can resume system and
ACPI_BITMASK_WAKE_STATUS and ACPI_BITMASK_POWER_BUTTON_STATUS are set in
pm1a_sts, but kernel does not report any key event to user space during
resuming by default.
So, send wakeup key event to user space during resume from power button.
Signed-off-by: Ken Xue <Ken.Xue@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The TongFang GMxXGxx, which needs IRQ overriding for the keyboard to work,
is also sold as the Eluktronics RP-15 which does not use the standard
TongFang GMxXGxx DMI board_name.
Add an entry for this laptop to the irq1_edge_low_force_override[] DMI
table to make the internal keyboard functional.
Reported-by: Luis Acuna <ldacuna@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since all of the ACPI EC driver code runs in thread context after recent
changes, it does not need to disable interrupts on the local CPU when
acquiring a spin lock.
Make it use the spin lock without disabling interrupts.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After commit 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler
for SCI") all of the EC code runs in thread context on all systems where
EC events are signaled through a GPE.
It may as well run in thread context on systems using a dedicated IRQ
for EC events signaling, so make it use a threaded handler for that IRQ.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After commit 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler
for SCI") any ACPICA code never runs in a hardirq handler, so it need
not dissable interrupts on the local CPU when acquiring a spin lock.
Make it use spin locks without disabling interrupts.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Move and rename cppc_cpufreq_perf_to_khz() and cppc_cpufreq_khz_to_perf() to
use them outside cppc_cpufreq in topology_init_cpu_capacity_cppc().
Modify the interface to use struct cppc_perf_caps *caps instead of
struct cppc_cpudata *cpu_data as we only use the fields of cppc_perf_caps.
cppc_cpufreq was converting the lowest and nominal freq from MHz to kHz
before using them. We move this conversion inside cppc_perf_to_khz and
cppc_khz_to_perf to make them generic and usable outside cppc_cpufreq.
No functional change
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20231211104855.558096-6-vincent.guittot@linaro.org
|
|
Add helper to retrieve the performance attributes based on the device
handle. The helper function is exported so the CXL driver can use that
to acquire the performance data between the CPU and the CXL host bridge.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/170319618721.2212653.5552947472849081786.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add generic port support for the parsing of HMAT system locality sub-table.
The attributes will be added to the third array member of the access
coordinates in order to not mix with the existing memory attributes. It
only provides the system locality attributes from initiator to the
generic port targets and is missing the rest of the data to the actual
memory device.
The complete attributes will be updated when a memory device is
attached and the system locality information is calculated end to end.
Through hmat_update_target_attrs(), the best performance attributes will
be setup in target->coord.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/170319618135.2212653.13778540010384821833.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Refactor hmat_parse_locality() to break up the deep nesting of the
function.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/170319617537.2212653.10625501075519862509.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add SRAT parsing for the HMAT init in order to collect the device handle
from the Generic Port Affinity Structure. The device handle will serve as
the key to search for target data.
Consolidate the common code with alloc_memory_target() in a helper function
alloc_target().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/170319616951.2212653.14862375982250406464.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create enums to provide named indexing for the access coordinate array.
This is in preparation for adding generic port support which will add a
third index in the array to keep the generic port attributes separate from
the memory attributes.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/170319616332.2212653.3872789279950567889.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Dan Williams suggested changing the struct 'node_hmem_attrs' to
'access_coordinates' [1]. The struct is a container of r/w-latency and
r/w-bandwidth numbers. Moving forward, this container will also be used by
CXL to store the performance characteristics of each link hop in
the PCIE/CXL topology. So, where node_hmem_attrs is just the access
parameters of a memory-node, access_coordinates applies more broadly
to hardware topology characteristics. The observation is that seemed like
an exercise in having the application identify "where" it falls on a
spectrum of bandwidth and latency needs. For the tuple of
read/write-latency and read/write-bandwidth, "coordinates" is not a perfect
fit. Sometimes it is just conveying values in isolation and not a
"location" relative to other performance points, but in the end this data
is used to identify the performance operation point of a given memory-node.
[2]
Link: http://lore.kernel.org/r/64471313421f7_1b66294d5@dwillia2-xfh.jf.intel.com.notmuch/
Link: https://lore.kernel.org/linux-cxl/645e6215ee0de_1e6f2945e@dwillia2-xfh.jf.intel.com.notmuch/
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/170319615734.2212653.15319394025985499185.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The CDAT table is very similar to ACPI tables when it comes to sub-table
and entry structures. The helper functions can be also used to parse the
CDAT table. Add support to the helper functions to deal with an external
CDAT table, and also handle the endieness since CDAT can be processed by a
BE host. Export a function cdat_table_parse() for CXL driver to parse
a CDAT table.
In order to minimize ACPICA code changes, __force is being utilized to deal
with the case of a big endian (BE) host parsing a CDAT. All CDAT data
structure variables are being force casted to __leX as appropriate.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/170319615131.2212653.10932785667981494238.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
There are two major types of uncorrected recoverable (UCR) errors :
- Synchronous error: The error is detected and raised at the point of
the consumption in the execution flow, e.g. when a CPU tries to
access a poisoned cache line. The CPU will take a synchronous error
exception such as Synchronous External Abort (SEA) on Arm64 and
Machine Check Exception (MCE) on X86. OS requires to take action (for
example, offline failure page/kill failure thread) to recover this
uncorrectable error.
- Asynchronous error: The error is detected out of processor execution
context, e.g. when an error is detected by a background scrubber.
Some data in the memory are corrupted. But the data have not been
consumed. OS is optional to take action to recover this uncorrectable
error.
When APEI firmware first is enabled, a platform may describe one error
source for the handling of synchronous errors (e.g. MCE or SEA notification
), or for handling asynchronous errors (e.g. SCI or External Interrupt
notification). In other words, we can distinguish synchronous errors by
APEI notification. For synchronous errors, kernel will kill the current
process which accessing the poisoned page by sending SIGBUS with
BUS_MCEERR_AR. In addition, for asynchronous errors, kernel will notify the
process who owns the poisoned page by sending SIGBUS with BUS_MCEERR_AO in
early kill mode. However, the GHES driver always sets mf_flags to 0 so that
all synchronous errors are handled as asynchronous errors in memory failure.
To this end, set memory failure flags as MF_ACTION_REQUIRED on synchronous
events.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Tested-by: Ma Wupeng <mawupeng1@huawei.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Xiaofei Tan <tanxiaofei@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ACPI LPSS driver and the Surface platform driver code use almost the
same code pattern for checking if one ACPI device is present in the list
returned by _DEP for another ACPI device.
To reduce the resulting code duplication, introduce a helper for that
called acpi_device_dep() and invoke it from both places.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
A bus_dma_region necessarily stores both CPU and DMA base addresses for
a range, so there's no need to also store the difference between them.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
It is somewhat better to use the size of the first array element for
computing the size of the entire array than to rely on the array
element data type definition knowledge and the former is also
consistent with the array allocation in acpi_evaluate_reference(),
so modify the code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are only 4 users of acpi_evaluate_reference() and none of them
actually cares about the reason why it fails. All of them are only
interested in whether or not it is successful, so it can return a bool
value indicating that.
Modify acpi_evaluate_reference() as per the observation above and update
its callers accordingly so as to get rid of useless code and local
variables.
The observable behavior of the kernel is not expected to change after
this modification of the code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The code in acpi_evaluate_reference() can be improved in some ways
without changing its observable behavior. Among other things:
* None of the local variables in that function except for buffer
needs to be initialized.
* The element local variable is only used in the for () loop block,
so it can be defined there.
* Multiple checks can be combined.
* Code duplication related to error handling can be eliminated.
* Redundant inner parens can be dropped.
Modify the function as per the above.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The cpufreq code can be in a loadable module, so the architecture support
for it has to be exported:
ERROR: modpost: "acpi_arch_thermal_cpufreq_pctg" [drivers/acpi/processor.ko] undefined!
Fixes: 310293a2b941 ("ACPI: processor: reduce CPUFREQ thermal reduction pctg for Tegra241")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When both CONFIG_RAS_CEC and CONFIG_ACPI_EXTLOG are enabled, Linux does
not clear the status word of the BIOS supplied error record for corrected
errors. This may prevent logging of subsequent uncorrected errors.
Fix by clearing the status.
Fixes: 23ba710a0864 ("x86/mce: Fix all mce notifiers to update the mce->kflags bitmask")
Reported-by: Erwin Tsaur <erwin.tsaur@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The _store callbacks of the trip point temperature and hysteresis sysfs
attributes invoke thermal_notify_tz_trip_change() to send a notification
regarding the trip point change, but when trip points are updated by the
platform firmware, trip point change notifications are not sent.
To make the behavior after a trip point change more consistent,
modify all of the 3 places where trip point temperature is updated
to use a new function called thermal_zone_set_trip_temp() for this
purpose and make that function call thermal_notify_tz_trip_change().
Note that trip point hysteresis can only be updated via sysfs and
trip_point_hyst_store() calls thermal_notify_tz_trip_change() already,
so this code path need not be changed.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The conversion to CLK_FRAC_DIVIDER_POWER_OF_TWO_PS uses wrong flags
in the parameters and hence miscalculates the values in the clock
divider. Fix this by applying the flag to the proper parameter.
Fixes: 82f53f9ee577 ("clk: fractional-divider: Introduce POWER_OF_TWO_PS flag")
Reported-by: Alex Vinarskis <alex.vinarskis@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The for loop does not iterate over the last element of the node_to_pxm_map
array. This could lead to a conflict between the final fake_pxm value and
the existing pxm values. That is, the final fake_pxm value can not be
guaranteed to be an unused pxm value.
While at it, fix up white space in slit_valid().
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|