summaryrefslogtreecommitdiff
path: root/drivers/ata/ahci.c
AgeCommit message (Collapse)AuthorFilesLines
2014-06-10Merge branch 'for-3.16' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Nothing too interesting - another ahci platform driver variant, additional controller support, minor fixes and cleanups" * 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: Add Device ID for HighPoint RocketRaid 642L ata: ep93xx: use dmaengine_prep_slave_sg api instead of internal callback ahci: add PCI ID for Marvell 88SE91A0 SATA Controller sata_fsl: remove check for CONFIG_MPC8315_DS ahci: add support for Hisilicon sata libahci_platform: add host_flags parameter in ahci_platform_init_host() ata: ahci: append new hflag AHCI_HFLAG_NO_FBS ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces Documentation: dt-bindings: reformat and order list of ahci-platform compatibles libata-sff: remove dead code ata: SATL compliance for Inquiry Product Revision pata_octeon_cf: use devm_kzalloc() to allocate cf_port
2014-06-03ahci: Add Device ID for HighPoint RocketRaid 642LJérôme Carretero1-0/+2
This device normally comes with a proprietary driver, using a web GUI to configure RAID: http://www.highpoint-tech.com/USA_new/series_rr600-download.htm But thankfully it also works out of the box with the AHCI driver, being just a Marvell 88SE9235. Devices 640L, 644L, 644LS should also be supported but not tested here. Signed-off-by: Jérôme Carretero <cJ-ko@zougloub.eu> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-05-27ahci: add PCI ID for Marvell 88SE91A0 SATA ControllerAndreas Schrägle1-0/+2
Add support for Marvell Technology Group Ltd. 88SE91A0 SATA 6Gb/s Controller by adding its PCI ID. Signed-off-by: Andreas Schrägle <ajs124.ajs124@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-04-24ahci: disable DEVSLP for Intel ValleyviewJacob Pan1-0/+15
On Intel Valleyview SoC, SATA device sleep is not reliable. When DEVSLP is attempted on certain SSDs, port_devslp write would fail and result in malfunction of AHCI controller. AHCI controller may be not shown in PCI enumeration after reset. Complete power source removal may be required to recover from this failure. So we blacklist this device and override host device reported capabilities such that device LPM will only attempt slumber but not DEVSLP. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-18ahci: Do not receive interrupts sent by dummy portsAlexander Gordeev1-6/+10
In multiple MSI mode all AHCI ports (including dummy) get assigned separate MSI vectors and (as result of execution pci_enable_msi_exact() function) separate IRQ numbers, (mapped to the MSI vectors). Therefore, although interrupts from dummy ports are not desired they are still enabled. We do not request IRQs for dummy ports, but that only means we do not assign AHCI-specific ISRs to corresponding IRQ numbers. As result, dummy port interrupts still could come and traverse all the way from the PCI device to the kernel, causing unnecessary overhead. This update disables IRQs for dummy ports and prevents the described issue. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Tested-by: David Milburn <dmilburn@redhat.com> Cc: linux-ide@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 5ca72c4f7c41 ("AHCI: Support multiple MSIs")
2014-04-17ahci: Use pci_enable_msi_exact() instead of pci_enable_msi_range()Alexander Gordeev1-4/+4
The driver calls pci_enable_msi_range() function with the range of [nvec..nvec] which is what pci_enable_msi_exact() function is for. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: linux-ide@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-17ahci: Ensure "MSI Revert to Single Message" mode is not enforcedAlexander Gordeev1-1/+8
The AHCI specification allows hardware to choose to revert to single MSI mode when fewer messages are allocated than requested. Yet, at least ICH10 chipset reverts to single MSI mode even when enough messages are allocated in some cases (see below). This update forces the driver to not rely on initialization of multiple MSIs mode alone and always check if "MSI Revert to Single Message" (MRSM) mode was enforced by the controller and fallback to the single MSI mode in case it did. That prevents a situation when the driver configured multiple per-port IRQ handlers, but the controller sends all port's interrupts to a single IRQ, which could easily screw up the interrupt handling and lead to delays and possibly crashes. The fix was tested on a 6-port controller that successfully reverted to the single MSI mode: 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0]) Subsystem: Super Micro Computer Inc Device 10a7 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 101 I/O ports at f110 [size=8] I/O ports at f100 [size=4] I/O ports at f0f0 [size=8] I/O ports at f0e0 [size=4] I/O ports at f020 [size=32] Memory at fbf00000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ahci With 6 ports just 8 MSI vectors should be enough, but the adapter enforces the MRSM mode when less than 16 vectors are written to the Multiple Messages Enable PCI register. I instigated MRSM mode by forcing @nvec to 8 in ahci_init_interrupts(). Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: linux-ide@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-16ahci: do not request irq for dummy portDavid Milburn1-8/+4
System may crash in ahci_hw_interrupt() or ahci_thread_fn() when accessing the interrupt status in a port's private_data if the port is actually a DUMMY port. 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller <snip console output for linux-3.15-rc1> [ 9.352080] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x1 impl SATA mode [ 9.352084] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 9.368155] Console: switching to colour frame buffer device 128x48 [ 9.439759] mgag200 0000:11:00.0: fb0: mgadrmfb frame buffer device [ 9.446765] mgag200 0000:11:00.0: registered panic notifier [ 9.470166] scsi1 : ahci [ 9.479166] scsi2 : ahci [ 9.488172] scsi3 : ahci [ 9.497174] scsi4 : ahci [ 9.506175] scsi5 : ahci [ 9.515174] scsi6 : ahci [ 9.518181] ata1: SATA max UDMA/133 abar m2048@0x95c00000 port 0x95c00100 irq 91 [ 9.526448] ata2: DUMMY [ 9.529182] ata3: DUMMY [ 9.531916] ata4: DUMMY [ 9.534650] ata5: DUMMY [ 9.537382] ata6: DUMMY [ 9.576196] [drm] Initialized mgag200 1.0.0 20110418 for 0000:11:00.0 on minor 0 [ 9.845257] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.865161] ata1.00: ATAPI: Optiarc DVD RW AD-7580S, FX04, max UDMA/100 [ 9.891407] ata1.00: configured for UDMA/100 [ 9.900525] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FX04 PQ: 0 ANSI: 5 [ 10.247399] iTCO_vendor_support: vendor-support=0 [ 10.261572] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 10.269764] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 10.301932] sd 0:2:0:0: [sda] 570310656 512-byte logical blocks: (291 GB/271 GiB) [ 10.317085] sd 0:2:0:0: [sda] Write Protect is off [ 10.328326] sd 0:2:0:0: [sda] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 10.375452] BUG: unable to handle kernel NULL pointer dereference at 000000000000003c [ 10.384217] IP: [<ffffffffa0133df0>] ahci_hw_interrupt+0x100/0x130 [libahci] [ 10.392101] PGD 0 [ 10.394353] Oops: 0000 [#1] SMP [ 10.397978] Modules linked in: sr_mod(+) cdrom sd_mod iTCO_wdt crc_t10dif iTCO_vendor_support crct10dif_common ahci libahci libata lpc_ich mfd_core mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm drm i2c_core megaraid_sas dm_mirror dm_region_hash dm_log dm_mod [ 10.426499] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc1 #1 [ 10.433495] Hardware name: QCI QSSC-S4R/QSSC-S4R, BIOS QSSC-S4R.QCI.01.00.S013.032920111005 03/29/2011 [ 10.443886] task: ffffffff81906460 ti: ffffffff818f0000 task.ti: ffffffff818f0000 [ 10.452239] RIP: 0010:[<ffffffffa0133df0>] [<ffffffffa0133df0>] ahci_hw_interrupt+0x100/0x130 [libahci] [ 10.462838] RSP: 0018:ffff880033c03d98 EFLAGS: 00010046 [ 10.468767] RAX: 0000000000a400a4 RBX: ffff880029a6bc18 RCX: 00000000fffffffa [ 10.476731] RDX: 00000000000000a4 RSI: ffff880029bb0000 RDI: ffff880029a6bc18 [ 10.484696] RBP: ffff880033c03dc8 R08: 0000000000000000 R09: ffff88002f800490 [ 10.492661] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000000 [ 10.500625] R13: ffff880029a6bd98 R14: 0000000000000000 R15: ffffc90000194000 [ 10.508590] FS: 0000000000000000(0000) GS:ffff880033c00000(0000) knlGS:0000000000000000 [ 10.517623] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 10.524035] CR2: 000000000000003c CR3: 00000000328ff000 CR4: 00000000000007b0 [ 10.531999] Stack: [ 10.534241] 0000000000000017 ffff880031ba7d00 000000000000005c ffff880031ba7d00 [ 10.542535] 0000000000000000 000000000000005c ffff880033c03e10 ffffffff810c2a1e [ 10.550827] ffff880031ae2900 000000008108fb4f ffff880031ae2900 ffff880031ae2984 [ 10.559121] Call Trace: [ 10.561849] <IRQ> [ 10.563994] [<ffffffff810c2a1e>] handle_irq_event_percpu+0x3e/0x1a0 [ 10.571309] [<ffffffff810c2bbd>] handle_irq_event+0x3d/0x60 [ 10.577631] [<ffffffff810c4fdd>] try_one_irq.isra.6+0x8d/0xf0 [ 10.584142] [<ffffffff810c5313>] note_interrupt+0x173/0x1f0 [ 10.590460] [<ffffffff810c2a8e>] handle_irq_event_percpu+0xae/0x1a0 [ 10.597554] [<ffffffff810c2bbd>] handle_irq_event+0x3d/0x60 [ 10.603872] [<ffffffff810c5727>] handle_edge_irq+0x77/0x130 [ 10.610199] [<ffffffff81014b8f>] handle_irq+0xbf/0x150 [ 10.616040] [<ffffffff8109ff4e>] ? vtime_account_idle+0xe/0x50 [ 10.622654] [<ffffffff815fca1a>] ? atomic_notifier_call_chain+0x1a/0x20 [ 10.630140] [<ffffffff816038cf>] do_IRQ+0x4f/0xf0 [ 10.635490] [<ffffffff815f8aed>] common_interrupt+0x6d/0x6d [ 10.641805] <EOI> [ 10.643950] [<ffffffff8149ca9f>] ? cpuidle_enter_state+0x4f/0xc0 [ 10.650972] [<ffffffff8149ca98>] ? cpuidle_enter_state+0x48/0xc0 [ 10.657775] [<ffffffff8149cb47>] cpuidle_enter+0x17/0x20 [ 10.663807] [<ffffffff810b0070>] cpu_startup_entry+0x2c0/0x3d0 [ 10.670423] [<ffffffff815dfcc7>] rest_init+0x77/0x80 [ 10.676065] [<ffffffff81a60f47>] start_kernel+0x40f/0x41a [ 10.682190] [<ffffffff81a60941>] ? repair_env_string+0x5c/0x5c [ 10.688799] [<ffffffff81a60120>] ? early_idt_handlers+0x120/0x120 [ 10.695699] [<ffffffff81a605ee>] x86_64_start_reservations+0x2a/0x2c [ 10.702889] [<ffffffff81a60733>] x86_64_start_kernel+0x143/0x152 [ 10.709689] Code: a0 fc ff 85 c0 8b 4d d4 74 c3 48 8b 7b 08 89 ca 48 c7 c6 60 66 13 a0 31 c0 e8 9d 70 28 e1 8b 4d d4 eb aa 0f 1f 84 00 00 00 00 00 <45> 8b 64 24 3c 48 89 df e8 23 47 4c e1 41 83 fc 01 19 c0 48 83 [ 10.731470] RIP [<ffffffffa0133df0>] ahci_hw_interrupt+0x100/0x130 [libahci] [ 10.739441] RSP <ffff880033c03d98> [ 10.743333] CR2: 000000000000003c [ 10.747032] ---[ end trace b6e82636970e2690 ]--- [ 10.760190] Kernel panic - not syncing: Fatal exception in interrupt [ 10.767291] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Cc: Alexander Gordeev <agordeev@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-of-by: David Milburn <dmilburn@redhat.com> Fixes: 5ca72c4f7c41 ("AHCI: Support multiple MSIs")
2014-04-02Merge tag 'pci-v3.15-changes' of ↵Linus Torvalds1-11/+9
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Enumeration - Increment max correctly in pci_scan_bridge() (Andreas Noever) - Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever) - Assign CardBus bus number only during the second pass (Andreas Noever) - Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever) - Make sure bus number resources stay within their parents bounds (Andreas Noever) - Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever) - Check for child busses which use more bus numbers than allocated (Andreas Noever) - Don't scan random busses in pci_scan_bridge() (Andreas Noever) - x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas) - x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas) - x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas) - x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas) - x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas) NUMA - x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas) - x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas) - x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas) - x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas) - x86: Remove acpi_get_pxm() usage (Bjorn Helgaas) - ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas) - ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas) - ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas) Resource management - i2o: Fix and refactor PCI space allocation (Bjorn Helgaas) - Add resource_contains() (Bjorn Helgaas) - Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas) - Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas) - Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas) - Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas) - Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas) - Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas) - Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas) - Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas) - alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas) - s390: Use generic pci_enable_resources() (Bjorn Helgaas) - Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas) - Set type in __request_region() (Bjorn Helgaas) - Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas) - Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas) - Log IDE resource quirk in dmesg (Bjorn Helgaas) - Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas) PCI device hotplug - Make check_link_active() non-static (Rajat Jain) - Use link change notifications for hot-plug and removal (Rajat Jain) - Enable link state change notifications (Rajat Jain) - Don't disable the link permanently during removal (Rajat Jain) - Don't check adapter or latch status while disabling (Rajat Jain) - Disable link notification across slot reset (Rajat Jain) - Ensure very fast hotplug events are also processed (Rajat Jain) - Add hotplug_lock to serialize hotplug events (Rajat Jain) - Remove a non-existent card, regardless of "surprise" capability (Rajat Jain) - Don't turn slot off when hot-added device already exists (Yijing Wang) MSI - Keep pci_enable_msi() documentation (Alexander Gordeev) - ahci: Fix broken single MSI fallback (Alexander Gordeev) - ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev) - Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman) - Fix leak of msi_attrs (Greg Kroah-Hartman) - Fix pci_msix_vec_count() htmldocs failure (Masanari Iida) Virtualization - Device-specific ACS support (Alex Williamson) Freescale i.MX6 - Wait for retraining (Marek Vasut) Marvell MVEBU - Use Device ID and revision from underlying endpoint (Andrew Lunn) - Fix incorrect size for PCI aperture resources (Jason Gunthorpe) - Call request_resource() on the apertures (Jason Gunthorpe) - Fix potential issue in range parsing (Jean-Jacques Hiblot) Renesas R-Car - Check platform_get_irq() return code (Ben Dooks) - Add error interrupt handling (Ben Dooks) - Fix bridge logic configuration accesses (Ben Dooks) - Register each instance independently (Magnus Damm) - Break out window size handling (Magnus Damm) - Make the Kconfig dependencies more generic (Magnus Damm) Synopsys DesignWare - Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar) Miscellaneous - Remove unused SR-IOV VF Migration support (Bjorn Helgaas) - Enable INTx if BIOS left them disabled (Bjorn Helgaas) - Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter) - Clean up par-arch object file list (Liviu Dudau) - Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom) - ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang) - Fix pci_bus_b() build failure (Paul Gortmaker)" * tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits) Revert "[PATCH] Insert GART region into resource map" PCI: Log IDE resource quirk in dmesg PCI: Change pci_bus_alloc_resource() type_mask to unsigned long PCI: Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() resources: Set type in __request_region() PCI: Don't check resource_size() in pci_bus_alloc_resource() s390/PCI: Use generic pci_enable_resources() tile PCI RC: Use default pcibios_enable_device() sparc/PCI: Use default pcibios_enable_device() (Leon only) sh/PCI: Use default pcibios_enable_device() microblaze/PCI: Use default pcibios_enable_device() alpha/PCI: Use default pcibios_enable_device() PCI: Add "weak" generic pcibios_enable_device() implementation PCI: Don't enable decoding if BAR hasn't been assigned an address PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled PCI: Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit PCI: Don't try to claim IORESOURCE_UNSET resources PCI: Check IORESOURCE_UNSET before updating BAR PCI: Don't clear IORESOURCE_UNSET when updating BAR PCI: Mark resources as IORESOURCE_UNSET if we can't assign them ... Conflicts: arch/x86/include/asm/topology.h drivers/ata/ahci.c
2014-04-01Merge branch 'for-3.15' of ↵Linus Torvalds1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "A lot of activities on libata side this time. - A lot of changes around ahci. Various embedded platforms are implementing ahci controllers. Some were built atop ahci_platform, others were doing their own things. Hans made some structural changes to libahci and librarized ahci_platform so that ahci platform drivers can share more common code. A couple platform drivers are added on top of that and several are added to replace older drivers which were doing their own things (older ones are scheduled to be removed). - Dan finishes the patchset to make libata PM operations asynchronous. Combined with one patch being routed through scsi, this should speed resume measurably. - Various fixes and cleanups from Bartlomiej and others" * 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (61 commits) ata: fix Marvell SATA driver dependencies ata: fix ARASAN CompactFlash PATA driver dependencies ata: remove superfluous casts ata: sata_highbank: remove superfluous cast ata: fix Calxeda Highbank SATA driver dependencies ata: fix R-Car SATA driver dependencies ARM: davinci: da850: update SATA AHCI support ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller ata: move library code from ahci_platform.c to libahci_platform.c ata: ahci_platform: fix ahci_platform_data->suspend method handling libata: remove unused ata_sas_port_async_resume() stub libata.h: add stub for ata_sas_port_resume libata: async resume libata, libsas: kill pm_result and related cleanup ata: Fix compiler warning with APM X-Gene host controller driver arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries ata: Add APM X-Gene SoC AHCI SATA host controller driver Documentation: Add documentation for the APM X-Gene SoC SATA host controller DTS binding arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries ata: ahci_sunxi: fix code formatting ...
2014-02-23libahci: Allow drivers to override start_engineHans de Goede1-2/+4
Allwinner A10 and A20 ARM SoCs have an AHCI sata controller which needs a special register to be poked before starting the DMA engine. This register gets reset on an ahci_stop_engine call, so there is no other place then ahci_start_engine where this poking can be done. This commit allows drivers to override ahci_start_engine behavior for use by the Allwinner AHCI driver (and potentially other drivers in the future). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-02-21Merge tag 'pci-v3.14-fixes-1' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "The most interesting thing here is the change to enable INTx (by clearing PCI_COMMAND_INTX_DISABLE) if the BIOS left INTx disabled. Apparently the Baytrail BIOS does this, which means EHCI doesn't work. Also, fix an AHCI MSI regression and other issues with the recent MSI changes. This also adds pci_enable_msi_exact() and pci_enable_msix_exact(), which aren't regression fixes, but will keep us from touching drivers twice (once to stop using the deprecated pci_enable_msi(), etc., and again to use the *_exact() variants). There's also a minor MVEBU fix. Summary: MSI: - Fix AHCI single-MSI fallback (Alexander Gordeev) - Fix populate_msi_sysfs() error paths (Greg Kroah-Hartman) - Fix htmldocs problem (Masanari Iida) - Add pci_enable_msi_exact() and pci_enable_msix_exact() (Alexander Gordeev) - Update documentation (Alexander Gordeev) Miscellaneous: - mvebu: expose device ID & revision via lspci (Andrew Lunn) - Enable INTx if the BIOS left them disabled (Bjorn Helgaas)" * tag 'pci-v3.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: ahci: Fix broken fallback to single MSI mode PCI: Enable INTx if BIOS left them disabled PCI/MSI: Add pci_enable_msi_exact() and pci_enable_msix_exact() PCI/MSI: Fix cut-and-paste errors in documentation PCI/MSI: Add pci_enable_msi() documentation back PCI/MSI: Fix pci_msix_vec_count() htmldocs failure PCI/MSI: Fix leak of msi_attrs PCI/MSI: Check kmalloc() return value, fix leak of name PCI: mvebu: Use Device ID and revision from underlying endpoint
2014-02-18ahci: disable NCQ on Samsung pci-e SSDs on macbooksLevente Kurusa1-0/+14
Samsung's pci-e SSDs with device ID 0x1600 which are found on some macbooks time out on NCQ commands. Blacklist NCQ on the device so that the affected machines can at least boot. Original-patch-by: Levente Kurusa <levex@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60731 Cc: stable@vger.kernel.org
2014-02-15ahci: Fix broken fallback to single MSI modeAlexander Gordeev1-1/+3
Commit 7b92b4f61ec4 ("PCI/MSI: Remove pci_enable_msi_block_auto()") introduced a regression: if multiple MSI initialization fails, the code falls back to INTx rather than to single MSI. Fixes: 7b92b4f61ec4 ("PCI/MSI: Remove pci_enable_msi_block_auto()") Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Tejun Heo <tj@kernel.org>
2014-02-15ahci: Use pci_enable_msi_range() instead of pci_enable_msi_block()Alexander Gordeev1-11/+9
pci_enable_msi_block() has been deprecated; use pci_enable_msi_range() instead. [bhelgaas: changelog] Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Tejun Heo <tj@kernel.org>
2014-02-15ahci: Fix broken fallback to single MSI modeAlexander Gordeev1-1/+3
Commit 7b92b4f61ec4 ("PCI/MSI: Remove pci_enable_msi_block_auto()") introduced a regression: if multiple MSI initialization fails, the code falls back to INTx rather than to single MSI. Fixes: 7b92b4f61ec4 ("PCI/MSI: Remove pci_enable_msi_block_auto()") Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Tejun Heo <tj@kernel.org>
2014-02-14ata: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Cc: linux-ide@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-01-23Merge tag 'pci-v3.14-changes' of ↵Linus Torvalds1-21/+35
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v3.14 merge window: Resource management - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas) - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu) - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas) - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas) - Enforce bus address limits in resource allocation (Yinghai Lu) - Allocate 64-bit BARs above 4G when possible (Yinghai Lu) - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu) PCI device hotplug - Major rescan/remove locking update (Rafael J. Wysocki) - Make ioapic builtin only (not modular) (Yinghai Lu) - Fix release/free issues (Yinghai Lu) - Clean up pciehp (Bjorn Helgaas) - Announce pciehp slot info during enumeration (Bjorn Helgaas) MSI - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev) - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev) - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev) - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman) - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong) SR-IOV - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao) Virtualization - Add support for save/restore of extended capabilities (Alex Williamson) - Add Virtual Channel to save/restore support (Alex Williamson) - Never treat a VF as a multifunction device (Alex Williamson) - Add pci_try_reset_function(), et al (Alex Williamson) AER - Ignore non-PCIe error sources (Betty Dall) - Support ACPI HEST error sources for domains other than 0 (Betty Dall) - Consolidate HEST error source parsers (Bjorn Helgaas) - Add a TLP header print helper (Borislav Petkov) Freescale i.MX6 - Remove unnecessary code (Fabio Estevam) - Make reset-gpio optional (Marek Vasut) - Report "link up" only after link training completes (Marek Vasut) - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut) - Fix PCIe startup code (Richard Zhu) Marvell MVEBU - Remove duplicate of_clk_get_by_name() call (Andrew Lunn) - Drop writes to bridge Secondary Status register (Jason Gunthorpe) - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe) - Support a bridge with no IO port window (Jason Gunthorpe) - Use max_t() instead of max(resource_size_t,) (Jingoo Han) - Remove redundant of_match_ptr (Sachin Kamat) - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni) NVIDIA Tegra - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower) Renesas R-Car - Add runtime PM support (Valentine Barshak) - Fix rcar_pci_probe() return value check (Wei Yongjun) Synopsys DesignWare - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen) - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen) - Fix missing MSI IRQs (Harro Haan) - Add dw_pcie prefix before cfg_read/write (Pratyush Anand) - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand) - Whitespace cleanup (Jingoo Han) EISA - Call put_device() if device_register() fails (Levente Kurusa) - Revert EISA initialization breakage ((Bjorn Helgaas) Miscellaneous - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger) - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas) - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas) - Use dev_is_pci() to identify PCI devices (Yijing Wang) - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches) - Update documentation 00-INDEX (Erik Ekman)" * tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits) Revert "EISA: Initialize device before its resources" Revert "EISA: Log device resources in dmesg" vfio-pci: Use pci "try" reset interface PCI: Check parent kobject in pci_destroy_dev() xen/pcifront: Use global PCI rescan-remove locking powerpc/eeh: Use global PCI rescan-remove locking PCI: Fix pci_check_and_unmask_intx() comment typos PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus() MPT / PCI: Use pci_stop_and_remove_bus_device_locked() platform / x86: Use global PCI rescan-remove locking PCI: hotplug: Use global PCI rescan-remove locking pcmcia: Use global PCI rescan-remove locking ACPI / hotplug / PCI: Use global PCI rescan-remove locking ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug PCI: Add global pci_lock_rescan_remove() PCI: Cleanup pci.h whitespace PCI: Reorder so actual code comes before stubs PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0 ACPICA: Add helper macros to extract bus/segment numbers from HEST table. PCI: Make local functions static ...
2014-01-16Merge branch 'for-3.13-fixes' into for-3.14Tejun Heo1-9/+12
A scheduled horkage patch will conflict with HORKAGE changes in for-3.13-fixes. Pull in to avoid unnecessary merge conflicts. Signed-off-by: Tejun Heo <tj@kernel.org>
2014-01-04PCI/MSI: Remove pci_enable_msi_block_auto()Alexander Gordeev1-21/+35
The new pci_msi_vec_count() interface makes pci_enable_msi_block_auto() superfluous. Drivers can use pci_msi_vec_count() to learn the maximum number of MSIs supported by the device, and then call pci_enable_msi_block(). pci_enable_msi_block_auto() was introduced recently, and its only user is the AHCI driver, which is also updated by this change. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Tejun Heo <tj@kernel.org>
2013-12-31ahci: add PCI ID for Marvell 88SE9170 SATA controllerSimon Guinot1-0/+3
This patch adds support for the PCI ID provided by the Marvell 88SE9170 SATA controller. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-12-16ahci: bail out on ICH6 before using AHCI BARPaul Bolle1-9/+9
The check for "combined mode" (which disables ahci support) on ICH6 is done after the first use of AHCI BAR. But if ahci is not enabled AHCI BAR is initialized to 0x00000000. (At least it is on the ICH6-M I tested this on. If I understand the datasheet correctly it should also be on ICH6R.) This apparently makes the call of pcim_iomap_regions_request_all() return -EINVAL. And we end up with ahci: probe of 0000:00:1f.2 failed with error -22 (at warning level) in the logs. So check for "combined mode" before calling pcim_iomap_regions_request_all(). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-12-15drivers: ata: Mark the function ahci_init_interrupts() as static in ahci.cRashika Kheria1-1/+1
This patch marks the function ahci_init_interrupts() as static in ahci.c because it is not used outside this file. Thus, it also eliminates the following warning in ahci.c: drivers/ata/ahci.c:1099:5: warning: no previous prototype for ‘ahci_init_interrupts’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-12-03libata: Merge branch 'for-3.13-fixes' into for-3.14Tejun Heo1-0/+2
Pulling in for-3.13-fixes for the ahci_imx fix as further changes depend on it. Signed-off-by: Tejun Heo <tj@kernel.org>
2013-11-23ahci: add Marvell 9230 to the AHCI PCI device listSamir Benmendil1-0/+2
Tested with a DAWICONTROL DC-624e on 3.10.10 Signed-off-by: Samir Benmendil <samir.benmendil@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Levente Kurusa <levex@linux.com> Cc: stable@vger.kernel.org
2013-11-23ahci: mcp89: enter AHCI mode under Apple BIOS emulationJames Laird1-9/+51
Apple's BIOS emulation forcibly disables MCP89 AHCI, eg. on Macbook7,1. We can re-enable it, replacing the previous workaround of using ata_generic. tj: whitespace adjustments, dropped inline from is_mcp89_apple() Signed-off-by: James Laird <jhl@mafipulation.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-11-13Merge branch 'for-3.13' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata changes from Tejun Heo: "Nothing too interesting. Only two minor fixes in libata core. Most changes are specific to hardware which isn't too common" * 'for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: Add Device IDs for Intel Wildcat Point-LP sata_rcar: Convert to clk_prepare/unprepare drivers/libata: Set max sector to 65535 for Slimtype DVD A DS8A9SH drive libata: Add some missing command descriptions sata_highbank: clear whole array in highbank_initialize_phys() ahci: disabled FBS prior to issuing software reset libata: Fix display of sata speed ahci: imx: setup power saving methods ata_piix: minor typo and a printk fix ahci: Changing two module params with static and __read_mostly
2013-11-05ahci: Add Device IDs for Intel Wildcat Point-LPJames Ralston1-0/+4
This patch adds the AHCI-mode SATA Device IDs for the Intel Wildcat Point-LP PCH. Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-10-07ahci: use dev_info() instead of printk()Jingoo Han1-1/+1
Change "raw" printk() call to dev_info() to provide a better message to userspace so it can properly identify the device and not just have to guess. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-09-04Merge branch 'for-3.12' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata changes from Tejun Heo: "Two interesting changes. - libata acpi handling has been restructured so that the association between ata devices and ACPI handles are less convoluted. This change shouldn't change visible behavior. - Queued TRIM support, which enables sending TRIM to the device without draining in-flight RW commands, is added. Currently only enabled for ahci (and likely to stay that way for the foreseeable future). Other changes are driver-specific updates / fixes" * 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: bugfix: Remove __le32 in ata_tf_to_fis() libata: acpi: Remove ata_dev_acpi_handle stub in libata.h libata: Add support for queued DSM TRIM libata: Add support for SEND/RECEIVE FPDMA QUEUED libata: Add H2D FIS "auxiliary" port flag libata: Populate host-to-device FIS "auxiliary" field ata: acpi: rework the ata acpi bind support sata, highbank: send extra clock cycles in SGPIO patterns sata, highbank: set tx_atten override bits devicetree: create a separate binding description for sata_highbank drivers/ata/sata_rcar.c: simplify use of devm_ioremap_resource sata highbank: enable 64-bit DMA mask when using LPAE ata: pata_samsung_cf: add missing __iomem annotation ata: pata_arasan: Staticize local symbols sata_mv: Remove unneeded CONFIG_HAVE_CLK ifdefs ata: use dev_get_platdata() sata_mv: Remove unneeded forward declaration libata: acpi: remove dead code for ata_acpi_(un)bind libata: move 'struct ata_taskfile' and friends from ata.h to libata.h
2013-08-25libata: Add H2D FIS "auxiliary" port flagMarc Carino1-0/+8
Add a new port flag, ATA_FLAG_FPDMA_AUX, used to indicate support for transmission of the H2D FIS 'auxiliary' field. Signed-off-by: Marc Carino <marc.ceeeee@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-07-23ahci: fix Null pointer dereference in achi_host_active()Xiaotian Feng1-1/+8
commit b29900e6 (AHCI: Make distinct names for ports in /proc/interrupts) introuded a regression, which resulted Null pointer dereference for achi host with dummy ports. For ahci ports, when the port is dummy port, its private_data will be NULL, as ata_dummy_port_ops doesn't support ->port_start. changes in v2: use pp to check dummy ports, update comments Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Xiaotian Feng <xtfeng@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Alexander Gordeev <agordeev@redhat.com> Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2013-07-04Merge branch 'for-3.11' of ↵Linus Torvalds1-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Overview of changes: - The rest of maintainer email address updates. - Some core updates - more robust default behavior for port multipliers, better error reporting for SG_IO commands, and a way to better work around now ancient and probably pretty rare PATA -> SATA bridges with ATAPI devices. - sata_rcar stabilization. - Some hardware PCI ID additions and one-off low level driver updates." * 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) AHCI: use ATA_BUSY libata-zpodd: must use ata_tf_init() ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs libata: cleanup SAT error translation ahci: sata: add support for exynos5440 sata libata: skip SRST for all SIMG [34]7x port-multipliers ahci: remove pmp link online check in FBS EH sata highbank: add bit-banged SGPIO driver support ahci: make ahci_transmit_led_message into a function pointer sata_rcar: fix compilation warning in sata_rcar_thaw() sata_highbank: increase retry count but shorten duration for Calxeda controller ata: use pci_get_drvdata() ipr: qc_fill_rtf() method should not store alternate status register sata_rcar: add 'base' local variable to some functions sata_rcar: correct 'sata_rcar_sht' sata_rcar: kill superfluous code in sata_rcar_bmdma_fill_sg() libata: do not limit R-Car SATA driver to shmobile ata: use platform_{get,set}_drvdata() AHCI: Make distinct names for ports in /proc/interrupts ...
2013-07-04Merge tag 'pci-v3.11-changes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "PCI device hotplug - Add pci_alloc_dev() interface (Gu Zheng) - Add pci_bus_get()/put() for reference counting (Jiang Liu) - Fix SR-IOV reference count issues (Jiang Liu) - Remove unused acpi_pci_roots list (Jiang Liu) MSI - Conserve interrupt resources on x86 (Alexander Gordeev) AER - Force fatal severity when component has been reset (Betty Dall) - Reset link below Root Port as well as Downstream Port (Betty Dall) - Fix "Firmware first" flag setting (Bjorn Helgaas) - Don't parse HEST for non-PCIe devices (Bjorn Helgaas) ASPM - Warn when we can't disable ASPM as driver requests (Bjorn Helgaas) Miscellaneous - Add CircuitCo PCI IDs (Darren Hart) - Add AMD CZ SATA and SMBus PCI IDs (Shane Huang) - Work around Ivytown NTB BAR size issue (Jon Mason) - Detect invalid initial BAR values (Kevin Hao) - Add pcibios_release_device() (Sebastian Ott) - Fix powerpc & sparc PCI_UNKNOWN power state usage (Bjorn Helgaas)" * tag 'pci-v3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) MAINTAINERS: Add ACPI folks for ACPI-related things under drivers/pci PCI: Add CircuitCo vendor ID and subsystem ID PCI: Use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) PCI: Return early on allocation failures to unindent mainline code PCI: Simplify IOV implementation and fix reference count races PCI: Drop redundant setting of bus->is_added in virtfn_add_bus() unicore32/PCI: Remove redundant call of pci_bus_add_devices() m68k/PCI: Remove redundant call of pci_bus_add_devices() PCI / ACPI / PM: Use correct power state strings in messages PCI: Fix comment typo for pcie_pme_remove() PCI: Rename pci_release_bus_bridge_dev() to pci_release_host_bridge_dev() PCI: Fix refcount issue in pci_create_root_bus() error recovery path ia64/PCI: Clean up pci_scan_root_bus() usage PCI/AER: Reset link for devices below Root Port or Downstream Port ACPI / APEI: Force fatal AER severity when component has been reset PCI/AER: Remove "extern" from function declarations PCI/AER: Move AER severity defines to aer.h PCI/AER: Set dev->__aer_firmware_first only for matching devices PCI/AER: Factor out HEST device type matching PCI/AER: Don't parse HEST table for non-PCIe devices ...
2013-07-03Merge branch 'libata/for-3.10-fixes' into libata/for-3.11Tejun Heo1-1/+4
libata/for-3.10-fixes never got submitted during v3.10 cycle. Merge it into for-3.11 so that it can be routed together with other changes scheduled for v3.11. Three trivial conflicts in drivers/ata/sata_rcar.c. All are caused by 1b20f6a9ad ("sata_rcar: add 'base' local variable to some functions") conflicting with logic updates in for-3.10-fixes. The offending commit simply adds local variable @base on functions which dereferences sata_rcar_priv->base multiple times. The resolutions are trivial - applying s/priv->base/base/ in the conflicting logic updates. Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-25AHCI: use ATA_BUSYSergei Shtylyov1-1/+1
ahci_hardreset() and ahci_p5wdh_hardreset() use bare numbers for the BSY bit of the ATA status register, despite it's #define'd in <linux/ata.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-21ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDsSeth Heasley1-0/+1
This patch adds the AHCI-mode SATA DeviceIDs for the Intel Coleto Creek PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-06-03ahci: Add AMD CZ SATA device IDShane Huang1-0/+1
To add AMD CZ SATA controller device ID of IDE mode. [bhelgaas: drop pci_ids.h update] Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-06-03ata: use pci_get_drvdata()Jingoo Han1-2/+2
Use the wrapper function for getting the driver data using pci_dev instead of using dev_get_drvdata() with &pdev->dev, so we can directly pass a struct pci_dev. This is a purely cosmetic change. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-05-29ahci: add an observed PCI ID for Marvell 88se9172 SATA controllerGeorge Spelvin1-0/+2
A third possible PCI ID, as personally observed, and found in the pci.ids list. Signed-off-by: George Spelvin <linux@horizon.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-05-22AHCI: Make distinct names for ports in /proc/interruptsAlexander Gordeev1-1/+3
Currently all interrupts assigned to AHCI ports show up in '/proc/interrupts' as 'ahci'. This fix adds port numbers as suffixes and hence makes the descriptions distinct. Reported-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-05-14libata: update "Maintained by:" tagsTejun Heo1-1/+1
Jeff moved on to a greener pasture. s/Maintained by: Jeff Garzik/Maintained by: Tejun Heo/g Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jeff Garzik <jgarzik@pobox.com>
2013-04-29Merge tag 'pci-v3.10-changes' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v3.10 merge window: PCI device hotplug - Remove ACPI PCI subdrivers (Jiang Liu, Myron Stowe) - Make acpiphp builtin only, not modular (Jiang Liu) - Add acpiphp mutual exclusion (Jiang Liu) Power management - Skip "PME enabled/disabled" messages when not supported (Rafael Wysocki) - Fix fallback to PCI_D0 (Rafael Wysocki) Miscellaneous - Factor quirk_io_region (Yinghai Lu) - Cache MSI capability offsets & cleanup (Gavin Shan, Bjorn Helgaas) - Clean up EISA resource initialization and logging (Bjorn Helgaas) - Fix prototype warnings (Andy Shevchenko, Bjorn Helgaas) - MIPS: Initialize of_node before scanning bus (Gabor Juhos) - Fix pcibios_get_phb_of_node() declaration "weak" annotation (Gabor Juhos) - Add MSI INTX_DISABLE quirks for AR8161/AR8162/etc (Xiong Huang) - Fix aer_inject return values (Prarit Bhargava) - Remove PME/ACPI dependency (Andrew Murray) - Use shared PCI_BUS_NUM() and PCI_DEVID() (Shuah Khan)" * tag 'pci-v3.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits) vfio-pci: Use cached MSI/MSI-X capabilities vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK PCI: Remove "extern" from function declarations PCI: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK PCI: Drop msi_mask_reg() and remove drivers/pci/msi.h PCI: Use msix_table_size() directly, drop multi_msix_capable() PCI: Drop msix_table_offset_reg() and msix_pba_offset_reg() macros PCI: Drop is_64bit_address() and is_mask_bit_support() macros PCI: Drop msi_data_reg() macro PCI: Drop msi_lower_address_reg() and msi_upper_address_reg() macros PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directly PCI: Use cached MSI/MSI-X offsets from dev, not from msi_desc PCI: Clean up MSI/MSI-X capability #defines PCI: Use cached MSI-X cap while enabling MSI-X PCI: Use cached MSI cap while enabling MSI interrupts PCI: Remove MSI/MSI-X cap check in pci_msi_check_device() PCI: Cache MSI/MSI-X capability offsets in struct pci_dev PCI: Use u8, not int, for PM capability offset [SCSI] megaraid_sas: Use correct #define for MSI-X capability PCI: Remove "extern" from function declarations ...
2013-04-16ahci: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4bMyron Stowe1-5/+5
With the 0x1b4b vendor ID #define in place, convert hard-coded ID values. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jeff Garzik <jgarzik@pobox.com>
2013-03-05ahci: Add Device IDs for Intel Wellsburg PCHJames Ralston1-0/+2
This patch adds the RAID-mode SATA Device IDs for the Intel Wellsburg PCH Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-02-25Merge tag 'upstream-linus' of ↵Linus Torvalds1-0/+24
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libata updates from Jeff Garzik: 1) apply, and then revert, the sysfs export of ATA host controller number. Discussion was continuing after patch application, trying to figure out how to best mesh exported data with the installers, boot-time agents and other parties that want this info. 2) Merge Zero-Power Optical Device Driver (ZPODD) support, bringing the wonderfulness of sane power management to your CD/DVD device. Includes one SCSI-subsystem patch (with appropriate ACKs), adding runtime PM support to 'sr' driver. That is the ZPODD interaction bits. Patchset went through some 13 revisions before it got here; kudos to Intel for persistence. 3) pata_samsung_cf: use devm_clk_get() 4) more ata_piix, ahci PCI IDs 5) Add SATA driver for R-Car SoC 6) Convert libata to use devm_ioremap_resource (Note: I think Greg sent this to you, also) 7) Set proper Sense Key (SK) in the SCSI simulator when ATA passthrough indicates check condition. Google and specification hawks everywhere shall rejoice. * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (22 commits) [libata] fix smatch warning for zpodd_wake_dev [libata] Set proper SK when CK_COND is set. [libata] Convert to devm_ioremap_resource() libata: add R-Car SATA driver ahci: Add Device IDs for Intel Wellsburg PCH ata_piix: Add Device IDs for Intel Wellsburg PCH [SCSI] remove can_power_off flag from scsi_device [libata] scsi: no poll when ODD is powered off [SCSI] sr: support runtime pm ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDs ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs [libata] PM code cleanup for ata port [libata] pm: differentiate system and runtime pm for ata port Revert "libata: export host controller number thru /sys" libata: do not suspend port if normal ODD is attached libata: expose pm qos flags for ata device libata: handle power transition of ODD libata: check zero power ready status for ZPODD libata: move acpi notification code to zpodd libata: identify and init ZPODD devices ...
2013-02-21ahci: Add Device IDs for Intel Wellsburg PCHJames Ralston1-0/+8
This patch adds the AHCI-mode SATA Device IDs for the Intel Wellsburg PCH Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-26ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDsSeth Heasley1-0/+16
This patch adds the AHCI and RAID-mode SATA DeviceIDs for the Intel Avoton SOC. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-24AHCI: Support multiple MSIsAlexander Gordeev1-4/+89
Take advantage of multiple MSIs implementation on x86 - on systems with IRQ remapping AHCI ports not only get assigned separate MSI vectors - but also separate IRQs. As result, interrupts generated by different ports could be serviced on different CPUs rather than on a single one. In cases when number of allocated MSIs is less than requested the Sharing Last MSI mode does not get used, no matter implemented in hardware or not. Instead, the driver assumes the advantage of multiple MSIs is negated and falls back to the single MSI mode as if MRSM bit was set (some Intel chips implement this strategy anyway - MRSM bit gets set even if the number of allocated MSIs exceeds the number of implemented ports). Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/15bf7ee314dd55f21ec7d2a01c47613cd8190a7c.1353324359.git.agordeev@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-01-14[libata] ahci: Add support for Enmotus Bobcat device.Hugh Daschbach1-1/+7
Silicon does not support standard AHCI BAR assignment. Add vendor/device exception to force BAR 2. Signed-off-by: Hugh Daschbach <hugh.daschbach@enmotus.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-19 00:38:19 +0300