summaryrefslogtreecommitdiff
path: root/drivers/ata/ahci_sunxi.c
AgeCommit message (Collapse)AuthorFilesLines
2019-07-05drivers: ata: ahci_sunxi: Increased SATA/AHCI DMA TX/RX FIFOsUenal Mutlu1-2/+45
Increasing the SATA/AHCI DMA TX/RX FIFOs (P0DMACR.TXTS and .RXTS, ie. TX_TRANSACTION_SIZE and RX_TRANSACTION_SIZE) from default 0x0 each to 0x3 each, gives a write performance boost of 120 MiB/s to 132 MiB/s from lame 36 MiB/s to 45 MiB/s previously. Read performance is above 200 MiB/s. [tested on SSD using dd bs=4K/8K/12K/16K/20K/24K/32K: peak-perf at 12K] Tested on the SBCs Banana Pi R1 (aka Lamobo R1) and Banana Pi M1 which are based on the Allwinner A20 32bit-SoC (ARMv7-a / arm-linux-gnueabihf). These devices are RaspberryPi-like small devices. This problem of slow SATA write-speed with these small devices lasts for about 7 years now (beginning with the A10 SoC). Many commentators throughout the years wrongly assumed the slow write speed was a hardware limitation. This patch finally solves the problem, which in fact was just a hard-to-find software problem due to lack of SATA/AHCI documentation by the SoC-maker Allwinner Technology. Lists of the affected sunxi and other boards and SoCs with SATA using the ahci_sunxi driver: $ grep -i -e "^&ahci" arch/arm/boot/dts/sun*dts and http://linux-sunxi.org/SATA#Devices_with_SATA_ports See also http://linux-sunxi.org/Category:Devices_with_SATA_port Tested-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Uenal Mutlu <um@mutluit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-03ata: ahci_sunxi: add support for r40Corentin Labbe1-1/+2
This patch add the r40 compatible to the ahci_sunxi's supported list of compatible. Since R40 need ahci_platform to handle the reset controller, we also add the new AHCI_PLATFORM_GET_RESETS flag for ahci_platform_get_resources(). This has no consequence for older platform (a10, a20) since the reset is optional. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-22ata: add an extra argument to ahci_platform_get_resources()Kunihiko Hayashi1-1/+1
Add an extra argument to ahci_platform_get_resources(), that is for the bitmap representing the resource to get in this function. Currently there is no resources to be defined, so all the callers set '0' to the argument. Suggested-by: Hans de Goede <hdegoede@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-29ata: ahci_platform: fix owner module reference mismatch for scsi hostAkinobu Mita1-2/+9
The owner module reference of the ahci platform's scsi_host is initialized to libahci_platform's one, because these drivers use a scsi_host_template defined in libahci_platform. So these drivers can be unloaded even if the scsi device is being accessed. This fixes it by pushing the scsi_host_template from libahci_platform to all leaf drivers. The scsi_host_template is passed through a new argument of ahci_platform_init_host(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: linux-ide@vger.kernel.org Cc: linux-scsi@vger.kernel.org
2014-12-15Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-14ahci_sunxi: Make AHCI_HFLAG_NO_PMP flag configurable with a module optionHans de Goede1-1/+15
The use of the AHCI_HFLAG_NO_PMP flag is something which we inherited from the Allwinner android kernel sources, and I've always wanted to test if this is really necessary. So recently I've bought a sata port multiplexer, and I've given this a test spin on both A10 and A20 devices, and it seems to work fine: [ 2.154456] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.161092] ata1.15: Port Multiplier 1.2, 0x197b:0x0325 r0, 5 ports, feat 0x5/0xf [ 2.175511] ata1.00: hard resetting link [ 2.524929] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 2.531430] ata1.01: hard resetting link [ 2.974465] ata1.01: link resume succeeded after 1 retries [ 3.094932] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.101431] ata1.02: hard resetting link [ 4.174466] ata1.02: failed to resume link (SControl 0) [ 4.180065] ata1.02: SATA link down (SStatus 0 SControl 0) (and the same for links 3 and 4) Once the NO_PMP flag is removed it correctly sees the 2 disks which I've attached, and I can mount and use them just fine. Unfortunately when I then directly attached a disk to the sata port on the sunxi SoC, and booted a kernel without the AHCI_HFLAG_NO_PMP flag, it would not recognize that disk. It turns out that the sata controller in the sunxi SoCs fails to handle soft-resets issued to directly attached disks, and when pmp support is enabled the kernel will always issue a soft-reset. So add a module parameter to enable pmp usage, and default this to off, so that directly attached disks keep working normally. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-10-20ata: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-30ata: libahci_platform: move port_map parameters into the AHCI structureAntoine Ténart1-5/+3
This patch moves force_port_map and mask_port_map into the ahci_host_priv structure. This allows to modify them into the AHCI framework. This is needed by the new dt bindings representing ports as the port_map mask is computed automatically. Parameters modifying force_port_map, mask_port_map and flags have been removed from the ahci_platform_init_host() function, and inputs in the ahci_host_priv structure are now directly filed. Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-14libahci_platform: add host_flags parameter in ahci_platform_init_host()Kefeng Wang1-3/+6
Add a dynamic host_flags argument to make ahci_platform_init_host more flexible, then remove the AHCI_HFLAGS(...) argument from some driver's ata_port_info, and pass that in as the new argument. Cc: Hans de Geode <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kefeng Wang <kefeng.wang@linaro.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-17ata: ahci_sunxi: fix code formattingBartlomiej Zolnierkiewicz1-22/+22
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-03-17ata: ahci_sunxi: make ahci_sunxi_resume() staticBartlomiej Zolnierkiewicz1-1/+1
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-02-23ahci_sunxi: Use msleep instead of mdelayHans de Goede1-3/+3
ahci_sunxi_phy_init is called from the probe and resume code paths, and sleeping is safe in both, so use msleep instead of mdelay. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-02-23ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platformOlliver Schinagl1-0/+249
This patch adds support for the ahci sata controler found on Allwinner A10 and A20 SoCs to the ahci_platform driver. Orignally written by Olliver Schinagl using the approach of having a platform device which probe method creates a new child platform device which gets driven by ahci_platform.c, as done by ahci_imx.c . Refactored by Hans de Goede to add most of the non sunxi specific functionality to ahci_platform.c and use a platform_data pointer from of_device_id for the sunxi specific bits. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>