summaryrefslogtreecommitdiff
path: root/drivers/base
AgeCommit message (Collapse)AuthorFilesLines
2017-03-03Merge branch 'rebased-statx' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs 'statx()' update from Al Viro. This adds the new extended stat() interface that internally subsumes our previous stat interfaces, and allows user mode to specify in more detail what kind of information it wants. It also allows for some explicit synchronization information to be passed to the filesystem, which can be relevant for network filesystems: is the cached value ok, or do you need open/close consistency, or what? From David Howells. Andreas Dilger points out that the first version of the extended statx interface was posted June 29, 2010: https://www.spinics.net/lists/linux-fsdevel/msg33831.html * 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: statx: Add a system call to make enhanced file info available
2017-03-03Merge branch 'WIP.sched-core-for-linus' of ↵Linus Torvalds4-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched.h split-up from Ingo Molnar: "The point of these changes is to significantly reduce the <linux/sched.h> header footprint, to speed up the kernel build and to have a cleaner header structure. After these changes the new <linux/sched.h>'s typical preprocessed size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K lines), which is around 40% faster to build on typical configs. Not much changed from the last version (-v2) posted three weeks ago: I eliminated quirks, backmerged fixes plus I rebased it to an upstream SHA1 from yesterday that includes most changes queued up in -next plus all sched.h changes that were pending from Andrew. I've re-tested the series both on x86 and on cross-arch defconfigs, and did a bisectability test at a number of random points. I tried to test as many build configurations as possible, but some build breakage is probably still left - but it should be mostly limited to architectures that have no cross-compiler binaries available on kernel.org, and non-default configurations" * 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits) sched/headers: Clean up <linux/sched.h> sched/headers: Remove #ifdefs from <linux/sched.h> sched/headers: Remove the <linux/topology.h> include from <linux/sched.h> sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h> sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h> sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h> sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h> sched/headers: Remove <linux/sched.h> from <linux/sched/init.h> sched/core: Remove unused prefetch_stack() sched/headers: Remove <linux/rculist.h> from <linux/sched.h> sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h> sched/headers: Remove <linux/signal.h> from <linux/sched.h> sched/headers: Remove <linux/rwsem.h> from <linux/sched.h> sched/headers: Remove the runqueue_is_locked() prototype sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h> sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h> sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h> sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h> sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h> sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h> ...
2017-03-03statx: Add a system call to make enhanced file info availableDavid Howells1-1/+2
Add a system call to make extended file information available, including file creation and some attribute flags where available through the underlying filesystem. The getattr inode operation is altered to take two additional arguments: a u32 request_mask and an unsigned int flags that indicate the synchronisation mode. This change is propagated to the vfs_getattr*() function. Functions like vfs_stat() are now inline wrappers around new functions vfs_statx() and vfs_statx_fd() to reduce stack usage. ======== OVERVIEW ======== The idea was initially proposed as a set of xattrs that could be retrieved with getxattr(), but the general preference proved to be for a new syscall with an extended stat structure. A number of requests were gathered for features to be included. The following have been included: (1) Make the fields a consistent size on all arches and make them large. (2) Spare space, request flags and information flags are provided for future expansion. (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an __s64). (4) Creation time: The SMB protocol carries the creation time, which could be exported by Samba, which will in turn help CIFS make use of FS-Cache as that can be used for coherency data (stx_btime). This is also specified in NFSv4 as a recommended attribute and could be exported by NFSD [Steve French]. (5) Lightweight stat: Ask for just those details of interest, and allow a netfs (such as NFS) to approximate anything not of interest, possibly without going to the server [Trond Myklebust, Ulrich Drepper, Andreas Dilger] (AT_STATX_DONT_SYNC). (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks its cached attributes are up to date [Trond Myklebust] (AT_STATX_FORCE_SYNC). And the following have been left out for future extension: (7) Data version number: Could be used by userspace NFS servers [Aneesh Kumar]. Can also be used to modify fill_post_wcc() in NFSD which retrieves i_version directly, but has just called vfs_getattr(). It could get it from the kstat struct if it used vfs_xgetattr() instead. (There's disagreement on the exact semantics of a single field, since not all filesystems do this the same way). (8) BSD stat compatibility: Including more fields from the BSD stat such as creation time (st_btime) and inode generation number (st_gen) [Jeremy Allison, Bernd Schubert]. (9) Inode generation number: Useful for FUSE and userspace NFS servers [Bernd Schubert]. (This was asked for but later deemed unnecessary with the open-by-handle capability available and caused disagreement as to whether it's a security hole or not). (10) Extra coherency data may be useful in making backups [Andreas Dilger]. (No particular data were offered, but things like last backup timestamp, the data version number and the DOS archive bit would come into this category). (11) Allow the filesystem to indicate what it can/cannot provide: A filesystem can now say it doesn't support a standard stat feature if that isn't available, so if, for instance, inode numbers or UIDs don't exist or are fabricated locally... (This requires a separate system call - I have an fsinfo() call idea for this). (12) Store a 16-byte volume ID in the superblock that can be returned in struct xstat [Steve French]. (Deferred to fsinfo). (13) Include granularity fields in the time data to indicate the granularity of each of the times (NFSv4 time_delta) [Steve French]. (Deferred to fsinfo). (14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags. Note that the Linux IOC flags are a mess and filesystems such as Ext4 define flags that aren't in linux/fs.h, so translation in the kernel may be a necessity (or, possibly, we provide the filesystem type too). (Some attributes are made available in stx_attributes, but the general feeling was that the IOC flags were to ext[234]-specific and shouldn't be exposed through statx this way). (15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer, Michael Kerrisk]. (Deferred, probably to fsinfo. Finding out if there's an ACL or seclabal might require extra filesystem operations). (16) Femtosecond-resolution timestamps [Dave Chinner]. (A __reserved field has been left in the statx_timestamp struct for this - if there proves to be a need). (17) A set multiple attributes syscall to go with this. =============== NEW SYSTEM CALL =============== The new system call is: int ret = statx(int dfd, const char *filename, unsigned int flags, unsigned int mask, struct statx *buffer); The dfd, filename and flags parameters indicate the file to query, in a similar way to fstatat(). There is no equivalent of lstat() as that can be emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is also no equivalent of fstat() as that can be emulated by passing a NULL filename to statx() with the fd of interest in dfd. Whether or not statx() synchronises the attributes with the backing store can be controlled by OR'ing a value into the flags argument (this typically only affects network filesystems): (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this respect. (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise its attributes with the server - which might require data writeback to occur to get the timestamps correct. (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a network filesystem. The resulting values should be considered approximate. mask is a bitmask indicating the fields in struct statx that are of interest to the caller. The user should set this to STATX_BASIC_STATS to get the basic set returned by stat(). It should be noted that asking for more information may entail extra I/O operations. buffer points to the destination for the data. This must be 256 bytes in size. ====================== MAIN ATTRIBUTES RECORD ====================== The following structures are defined in which to return the main attribute set: struct statx_timestamp { __s64 tv_sec; __s32 tv_nsec; __s32 __reserved; }; struct statx { __u32 stx_mask; __u32 stx_blksize; __u64 stx_attributes; __u32 stx_nlink; __u32 stx_uid; __u32 stx_gid; __u16 stx_mode; __u16 __spare0[1]; __u64 stx_ino; __u64 stx_size; __u64 stx_blocks; __u64 __spare1[1]; struct statx_timestamp stx_atime; struct statx_timestamp stx_btime; struct statx_timestamp stx_ctime; struct statx_timestamp stx_mtime; __u32 stx_rdev_major; __u32 stx_rdev_minor; __u32 stx_dev_major; __u32 stx_dev_minor; __u64 __spare2[14]; }; The defined bits in request_mask and stx_mask are: STATX_TYPE Want/got stx_mode & S_IFMT STATX_MODE Want/got stx_mode & ~S_IFMT STATX_NLINK Want/got stx_nlink STATX_UID Want/got stx_uid STATX_GID Want/got stx_gid STATX_ATIME Want/got stx_atime{,_ns} STATX_MTIME Want/got stx_mtime{,_ns} STATX_CTIME Want/got stx_ctime{,_ns} STATX_INO Want/got stx_ino STATX_SIZE Want/got stx_size STATX_BLOCKS Want/got stx_blocks STATX_BASIC_STATS [The stuff in the normal stat struct] STATX_BTIME Want/got stx_btime{,_ns} STATX_ALL [All currently available stuff] stx_btime is the file creation time, stx_mask is a bitmask indicating the data provided and __spares*[] are where as-yet undefined fields can be placed. Time fields are structures with separate seconds and nanoseconds fields plus a reserved field in case we want to add even finer resolution. Note that times will be negative if before 1970; in such a case, the nanosecond fields will also be negative if not zero. The bits defined in the stx_attributes field convey information about a file, how it is accessed, where it is and what it does. The following attributes map to FS_*_FL flags and are the same numerical value: STATX_ATTR_COMPRESSED File is compressed by the fs STATX_ATTR_IMMUTABLE File is marked immutable STATX_ATTR_APPEND File is append-only STATX_ATTR_NODUMP File is not to be dumped STATX_ATTR_ENCRYPTED File requires key to decrypt in fs Within the kernel, the supported flags are listed by: KSTAT_ATTR_FS_IOC_FLAGS [Are any other IOC flags of sufficient general interest to be exposed through this interface?] New flags include: STATX_ATTR_AUTOMOUNT Object is an automount trigger These are for the use of GUI tools that might want to mark files specially, depending on what they are. Fields in struct statx come in a number of classes: (0) stx_dev_*, stx_blksize. These are local system information and are always available. (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino, stx_size, stx_blocks. These will be returned whether the caller asks for them or not. The corresponding bits in stx_mask will be set to indicate whether they actually have valid values. If the caller didn't ask for them, then they may be approximated. For example, NFS won't waste any time updating them from the server, unless as a byproduct of updating something requested. If the values don't actually exist for the underlying object (such as UID or GID on a DOS file), then the bit won't be set in the stx_mask, even if the caller asked for the value. In such a case, the returned value will be a fabrication. Note that there are instances where the type might not be valid, for instance Windows reparse points. (2) stx_rdev_*. This will be set only if stx_mode indicates we're looking at a blockdev or a chardev, otherwise will be 0. (3) stx_btime. Similar to (1), except this will be set to 0 if it doesn't exist. ======= TESTING ======= The following test program can be used to test the statx system call: samples/statx/test-statx.c Just compile and run, passing it paths to the files you want to examine. The file is built automatically if CONFIG_SAMPLES is enabled. Here's some example output. Firstly, an NFS directory that crosses to another FSID. Note that the AUTOMOUNT attribute is set because transiting this directory will cause d_automount to be invoked by the VFS. [root@andromeda ~]# /tmp/test-statx -A /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:26 Inode: 1703937 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------) Secondly, the result of automounting on that directory. [root@andromeda ~]# /tmp/test-statx /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:27 Inode: 2 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-03Merge tag 'pm-extra-4.11-rc1' of ↵Linus Torvalds3-134/+100
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates deom Rafael Wysocki: "These fix two bugs introduced by recent power management updates (in the cpuidle menu governor and intel_pstate) and a few other issues, clean up things and remove unused code. Specifics: - Fix for a cpuidle menu governor problem that started to take an unnecessary spinlock after one of the recent updates and that did not play well with the RT patch (Rafael Wysocki). - Fix for the new intel_pstate operation mode switching feature added recently that did not reinitialize P-state limits properly when switching operation modes (Rafael Wysocki). - Removal of unused global notifiers from the PM QoS framework (Viresh Kumar). - Generic power domains framework update to make it handle asynchronous invocations of PM callbacks in the "noirq" phases of system suspend/hibernation correctly (Ulf Hansson). - Two hibernation core cleanups (Rafael Wysocki). - intel_idle cleanup related to the sysfs interface (Len Brown). - Off-by-one bug fix in the OPP (Operating Performance Points) framework (Andrzej Hajda). - OPP framework's documentation fix (Viresh Kumar). - cpufreq qoriq driver cleanup (Tang Yuantian). - Fixes for typos in comments in the device runtime PM framework (Christophe Jaillet)" * tag 'pm-extra-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / OPP: Documentation: Fix opp-microvolt in examples intel_idle: stop exposing platform acronyms in sysfs cpufreq: intel_pstate: Fix limits issue with operation mode switching PM / hibernate: Define pr_fmt() and use pr_*() instead of printk() PM / hibernate: Untangle power_down() cpuidle: menu: Avoid taking spinlock for accessing QoS values PM / QoS: Remove global notifiers PM / runtime: Fix some typos cpufreq: qoriq: clean up unused code PM / OPP: fix off-by-one bug in dev_pm_opp_get_max_volt_latency loop PM / Domains: Power off masters immediately in the power off sequence PM / Domains: Rename is_async to one_dev_on for genpd_power_off() PM / Domains: Move genpd_power_off() above genpd_power_on()
2017-03-03Merge branches 'pm-cpuidle', 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki1-2/+1
* pm-cpuidle: intel_idle: stop exposing platform acronyms in sysfs cpuidle: menu: Avoid taking spinlock for accessing QoS values * pm-cpufreq: cpufreq: intel_pstate: Fix limits issue with operation mode switching cpufreq: qoriq: clean up unused code * pm-sleep: PM / hibernate: Define pr_fmt() and use pr_*() instead of printk() PM / hibernate: Untangle power_down()
2017-03-03Merge branches 'pm-core', 'pm-qos', 'pm-domains' and 'pm-opp'Rafael J. Wysocki3-132/+99
* pm-core: PM / runtime: Fix some typos * pm-qos: PM / QoS: Remove global notifiers * pm-domains: PM / Domains: Power off masters immediately in the power off sequence PM / Domains: Rename is_async to one_dev_on for genpd_power_off() PM / Domains: Move genpd_power_off() above genpd_power_on() * pm-opp: PM / OPP: Documentation: Fix opp-microvolt in examples PM / OPP: fix off-by-one bug in dev_pm_opp_get_max_volt_latency loop
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/debug.h> We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/debug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to move the memalloc_noio_*() APIs to <linux/sched/mm.h>Ingo Molnar1-1/+1
Update the .c files that depend on these APIs. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar2-1/+2
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27cpuidle: menu: Avoid taking spinlock for accessing QoS valuesRafael J. Wysocki1-2/+1
After commit 9908859acaa9 (cpuidle/menu: add per CPU PM QoS resume latency consideration) the cpuidle menu governor calls dev_pm_qos_read_value() on CPU devices to read the current resume latency QoS constraint values for them. That function takes a spinlock to prevent the device's power.qos pointer from becoming NULL during the access which is a problem for the RT patchset where spinlocks are converted into mutexes and the idle loop stops working. However, it is not even necessary for the menu governor to take that spinlock, because the power.qos pointer accessed under it cannot be modified during the access anyway. For this reason, introduce a "raw" routine for accessing device QoS resume latency constraints without locking and use it in the menu governor. Fixes: 9908859acaa9 (cpuidle/menu: add per CPU PM QoS resume latency consideration) Acked-by: Alex Shi <alex.shi@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-25memory-hotplug: use dev_online for memhp_auto_onlineNathan Fontenot1-1/+1
Commit 31bc3858ea3e ("add automatic onlining policy for the newly added memory") provides the capability to have added memory automatically onlined during add, but this appears to be slightly broken. The current implementation uses walk_memory_range() to call online_memory_block, which uses memory_block_change_state() to online the memory. Instead, we should be calling device_online() for the memory block in online_memory_block(). This would online the memory (the memory bus online routine memory_subsys_online() called from device_online calls memory_block_change_state()) and properly update the device struct offline flag. As a result of the current implementation, attempting to remove a memory block after adding it using auto online fails. This is because doing a remove, for instance echo offline > /sys/devices/system/memory/memoryXXX/state uses device_offline() which checks the dev->offline flag. Link: http://lkml.kernel.org/r/20170222220744.8119.19687.stgit@ltcalpine2-lp14.aus.stglabs.ibm.com Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25mm: wire up GFP flag passing in dma_alloc_from_contiguousLucas Stach1-2/+3
The callers of the DMA alloc functions already provide the proper context GFP flags. Make sure to pass them through to the CMA allocator, to make the CMA compaction context aware. Link: http://lkml.kernel.org/r/20170127172328.18574-3-l.stach@pengutronix.de Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Alexander Graf <agraf@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25mm: cma_alloc: allow to specify GFP maskLucas Stach1-1/+1
Most users of this interface just want to use it with the default GFP_KERNEL flags, but for cases where DMA memory is allocated it may be called from a different context. No functional change yet, just passing through the flag to the underlying alloc_contig_range function. Link: http://lkml.kernel.org/r/20170127172328.18574-2-l.stach@pengutronix.de Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Alexander Graf <agraf@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25mm: validate device_hotplug is held for memory hotplugDan Williams1-0/+5
mem_hotplug_begin() assumes that it can set mem_hotplug.active_writer and run the hotplug process without racing another thread. Validate this assumption with a lockdep assertion. Link: http://lkml.kernel.org/r/148693886229.16345.1770484669403334689.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Ben Hutchings <ben@decadent.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24PM / QoS: Remove global notifiersViresh Kumar1-46/+4
They were never used in the kernel, so get rid of them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-24PM / OPP: fix off-by-one bug in dev_pm_opp_get_max_volt_latency loopAndrzej Hajda1-1/+2
Reading array at given index before checking if index is valid results in illegal memory access. The bug was detected using KASAN framework. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-24PM / Domains: Power off masters immediately in the power off sequenceUlf Hansson1-6/+11
Once a subdomain is powered off, genpd queues a power off work for each of the subdomain's corresponding masters, thus postponing the masters to be powered off to a later point. When genpd used intermediate power off states, which was removed in commit ba2bbfbf6307 ("PM / Domains: Remove intermediate states from the power off sequence"), this behaviour made sense, but now it simply doesn't. Genpd can easily try to power off the masters in the same context as the subdomain, of course by acquiring/releasing the lock. Then, let's convert to this behaviour, as it avoids unnecessary works from being queued. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-24PM / Domains: Rename is_async to one_dev_on for genpd_power_off()Ulf Hansson1-6/+9
The parameter name is_async, for genpd_power_off() gives a poor description of its purpose. To clarify, let's rename it to one_dev_on and update the documentation of it in the function header. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-24PM / Domains: Move genpd_power_off() above genpd_power_on()Ulf Hansson1-81/+81
Following changes in genpd_power_on() makes it invoke genpd_power_off(). To enable these changes and avoiding to declare genpd_power_off(), let's move its implementation above genpd_power_on(). In this way, following changes should become easier to review. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-22Merge tag 'driver-core-4.11-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "small" driver core patches for 4.11-rc1. Not much here, some firmware documentation and self-test updates, a debugfs code formatting issue, and a new feature for call_usermodehelper to make it more robust on systems that want to lock it down in a more secure way. All of these have been linux-next for a while now with no reported issues" * tag 'driver-core-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kernfs: handle null pointers while printing node name and path Introduce STATIC_USERMODEHELPER to mediate call_usermodehelper() Make static usermode helper binaries constant kmod: make usermodehelper path a const string firmware: revamp firmware documentation selftests: firmware: send expected errors to /dev/null selftests: firmware: only modprobe if driver is missing platform: Print the resource range if device failed to claim kref: prefer atomic_inc_not_zero to atomic_add_unless debugfs: improve formatting of debugfs_real_fops()
2017-02-21Merge tag 'device-properties-4.11-rc1' of ↵Linus Torvalds1-82/+147
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device property updates from Rafael J. Wysocki: "Generic device properties framework updates for v4.11-rc1 Allow built-in (static) device properties to be declared as constant, make it possible to save memory by discarding alternative (but unused) built-in (static) property sets and add support for automatic handling of built-in properties to the I2C code" * tag 'device-properties-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: i2c: allow specify device properties in i2c_board_info device property: export code duplicating array of property entries device property: constify property arrays values device property: allow to constify properties
2017-02-21Merge tag 'pm-4.11-rc1' of ↵Linus Torvalds8-855/+566
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "The majority of changes go into the Operating Performance Points (OPP) framework and cpufreq this time, followed by devfreq and some scattered updates all over. The OPP changes are mostly related to switching over from RCU-based synchronization, that turned out to be overly complicated and problematic, to reference counting using krefs. In the cpufreq land there are core cleanups, documentation updates, a new driver for Broadcom BMIPS SoCs, a new cpufreq-dt sub-driver for TI SoCs that require special handling, ARM64 SoCs support for the qoriq driver, intel_pstate updates, powernv driver update and assorted fixes. The devfreq changes are mostly fixes related to the sysfs interface and some Exynos drivers updates. Apart from that, the cpuidle menu governor will support per-CPU PM QoS constraints for the wakeup latency now, some bugs in the wakeup IRQs framework are fixed, the generic power domains framework should handle asynchronous invocations of *noirq suspend/resume callbacks from now on, the analyze_suspend.py script is updated and there is a new tool for intel_pstate diagnostics. Specifics: - Operating Performance Points (OPP) framework fixes, cleanups and switch over from RCU-based synchronization to reference counting using krefs (Viresh Kumar, Wei Yongjun, Dave Gerlach) - cpufreq core cleanups and documentation updates (Viresh Kumar, Rafael Wysocki) - New cpufreq driver for Broadcom BMIPS SoCs (Markus Mayer) - New cpufreq-dt sub-driver for TI SoCs requiring special handling, like in the AM335x, AM437x, DRA7x, and AM57x families, along with new DT bindings for it (Dave Gerlach, Paul Gortmaker) - ARM64 SoCs support for the qoriq cpufreq driver (Tang Yuantian) - intel_pstate driver updates including a new sysfs knob to control the driver's operation mode and fixes related to the no_turbo sysfs knob and the hardware-managed P-states feature support (Rafael Wysocki, Srinivas Pandruvada) - New interface to export ultra-turbo frequencies for the powernv cpufreq driver (Shilpasri Bhat) - Assorted fixes for cpufreq drivers (Arnd Bergmann, Dan Carpenter, Wei Yongjun) - devfreq core fixes, mostly related to the sysfs interface exported by it (Chanwoo Choi, Chris Diamand) - Updates of the exynos-bus and exynos-ppmu devfreq drivers (Chanwoo Choi) - Device PM QoS extension to support CPUs and support for per-CPU wakeup (device resume) latency constraints in the cpuidle menu governor (Alex Shi) - Wakeup IRQs framework fixes (Grygorii Strashko) - Generic power domains framework update including a fix to make it handle asynchronous invocations of *noirq suspend/resume callbacks correctly (Ulf Hansson, Geert Uytterhoeven) - Assorted fixes and cleanups in the core suspend/hibernate code, PM QoS framework and x86 ACPI idle support code (Corentin Labbe, Geert Uytterhoeven, Geliang Tang, John Keeping, Nick Desaulniers) - Update of the analyze_suspend.py script is updated to version 4.5 offering multiple improvements (Todd Brandt) - New tool for intel_pstate diagnostics using the pstate_sample tracepoint (Doug Smythies)" * tag 'pm-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (85 commits) MAINTAINERS: cpufreq: add bmips-cpufreq.c PM / QoS: Fix memory leak on resume_latency.notifiers PM / Documentation: Spelling s/wrtie/write/ PM / sleep: Fix test_suspend after sleep state rework cpufreq: CPPC: add ACPI_PROCESSOR dependency cpufreq: make ti-cpufreq explicitly non-modular cpufreq: Do not clear real_cpus mask on policy init tools/power/x86: Debug utility for intel_pstate driver AnalyzeSuspend: fix drag and zoom bug in javascript PM / wakeirq: report a wakeup_event on dedicated wekup irq PM / wakeirq: Fix spurious wake-up events for dedicated wakeirqs PM / wakeirq: Enable dedicated wakeirq for suspend cpufreq: dt: Don't use generic platdev driver for ti-cpufreq platforms cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime Documentation: dt: add bindings for ti-cpufreq PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API cpufreq: qoriq: Don't look at clock implementation details cpufreq: qoriq: add ARM64 SoCs support PM / Domains: Provide dummy governors if CONFIG_PM_GENERIC_DOMAINS=n cpufreq: brcmstb-avs-cpufreq: remove unnecessary platform_set_drvdata() ...
2017-02-21Merge tag 'regmap-v4.11' of ↵Linus Torvalds4-101/+117
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "For v4.11 activity on the regmap API has literally doubled, there are two patches this release: - fixes from Charles Keepax to make the kerneldoc generate correctly - a cleanup from Geliang Tang using rb_entry() rather than open coding it with container_of()" * tag 'regmap-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Fixup the kernel-doc comments on functions/structures regmap: use rb_entry()
2017-02-20Merge branch 'irq-core-for-linus' of ↵Linus Torvalds2-1/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This update provides: - Yet another two irq controller chip drivers - A few updates and fixes for GICV3 - A resource managed function for interrupt allocation - Fixes, updates and enhancements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/qcom: Fix error handling genirq: Clarify logic calculating bogus irqreturn_t values genirq/msi: Add stubs for get_cached_msi_msg/pci_write_msi_msg genirq/devres: Use dev_name(dev) as default for devname genirq: Fix /proc/interrupts output alignment irqdesc: Add a resource managed version of irq_alloc_descs() irqchip/gic-v3-its: Zero command on allocation irqchip/gic-v3-its: Fix command buffer allocation irqchip/mips-gic: Fix local interrupts irqchip: Add a driver for Cortina Gemini irqchip: DT bindings for Cortina Gemini irqchip irqchip/gic-v3: Remove duplicate definition of GICD_TYPER_LPIS irqchip/gic-v3-its: Rename MAPVI to MAPTI irqchip/gic-v3-its: Drop deprecated GITS_BASER_TYPE_CPU irqchip/gic-v3-its: Refactor command encoding irqchip/gic-v3-its: Enable cacheable attribute Read-allocate hints irqchip/qcom: Add IRQ combiner driver ACPI: Add support for ResourceSource/IRQ domain mapping ACPI: Generic GSI: Do not attempt to map non-GSI IRQs during bus scan irq/platform-msi: Fix comment about maximal MSIs
2017-02-20Merge branches 'pm-core', 'pm-qos' and 'pm-domains'Rafael J. Wysocki3-60/+88
* pm-core: PM / wakeirq: report a wakeup_event on dedicated wekup irq PM / wakeirq: Fix spurious wake-up events for dedicated wakeirqs PM / wakeirq: Enable dedicated wakeirq for suspend * pm-qos: PM / QoS: Fix memory leak on resume_latency.notifiers PM / QoS: Remove unneeded linux/miscdevice.h include * pm-domains: PM / Domains: Provide dummy governors if CONFIG_PM_GENERIC_DOMAINS=n PM / Domains: Fix asynchronous execution of *noirq() callbacks PM / Domains: Correct comment in irq_safe_dev_in_no_sleep_domain() PM / Domains: Rename functions in genpd for power on/off
2017-02-20Merge branch 'pm-cpuidle'Rafael J. Wysocki1-0/+2
* pm-cpuidle: CPU / PM: expose pm_qos_resume_latency for CPUs cpuidle/menu: add per CPU PM QoS resume latency consideration cpuidle/menu: stop seeking deeper idle if current state is deep enough ACPI / idle: small formatting fixes
2017-02-20Merge branch 'pm-opp'Rafael J. Wysocki4-795/+476
* pm-opp: (24 commits) PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API PM / OPP: Make _find_opp_table_unlocked() static PM / OPP: Update Documentation to remove RCU specific bits PM / OPP: Simplify dev_pm_opp_get_max_volt_latency() PM / OPP: Simplify _opp_set_availability() PM / OPP: Move away from RCU locking PM / OPP: Take kref from _find_opp_table() PM / OPP: Update OPP users to put reference PM / OPP: Add 'struct kref' to struct dev_pm_opp PM / OPP: Use dev_pm_opp_get_opp_table() instead of _add_opp_table() PM / OPP: Take reference of the OPP table while adding/removing OPPs PM / OPP: Return opp_table from dev_pm_opp_set_*() routines PM / OPP: Add 'struct kref' to OPP table PM / OPP: Add per OPP table mutex PM / OPP: Split out part of _add_opp_table() and _remove_opp_table() PM / OPP: Don't expose srcu_head to register notifiers PM / OPP: Rename dev_pm_opp_get_suspend_opp() and return OPP rate PM / OPP: Don't allocate OPP table from _opp_allocate() PM / OPP: Rename and split _dev_pm_opp_remove_table() PM / OPP: Add light weight _opp_free() routine ...
2017-02-18PM / QoS: Fix memory leak on resume_latency.notifiersJohn Keeping1-1/+1
Since commit 2d984ad132a8 (PM / QoS: Introcuce latency tolerance device PM QoS type) we reassign "c" to point at qos->latency_tolerance before freeing c->notifiers, but the notifiers field of latency_tolerance is never used. Restore the original behaviour of freeing the notifiers pointer on qos->resume_latency, which is used, and fix the following kmemleak warning. unreferenced object 0xed9dba00 (size 64): comm "kworker/0:1", pid 36, jiffies 4294670128 (age 15202.983s) hex dump (first 32 bytes): 00 00 00 00 04 ba 9d ed 04 ba 9d ed 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<c06f6084>] kmemleak_alloc+0x74/0xb8 [<c011c964>] kmem_cache_alloc_trace+0x170/0x25c [<c035f448>] dev_pm_qos_constraints_allocate+0x3c/0xe4 [<c035f574>] __dev_pm_qos_add_request+0x84/0x1a0 [<c035f6cc>] dev_pm_qos_add_request+0x3c/0x54 [<c03c3fc4>] usb_hub_create_port_device+0x110/0x2b8 [<c03b2a60>] hub_probe+0xadc/0xc80 [<c03bb050>] usb_probe_interface+0x1b4/0x260 [<c035773c>] driver_probe_device+0x198/0x40c [<c0357b14>] __device_attach_driver+0x8c/0x98 [<c0355bbc>] bus_for_each_drv+0x8c/0x9c [<c0357494>] __device_attach+0x98/0x138 [<c0357c64>] device_initial_probe+0x14/0x18 [<c03569dc>] bus_probe_device+0x30/0x88 [<c0354c54>] device_add+0x430/0x554 [<c03b92d8>] usb_set_configuration+0x660/0x6fc Fixes: 2d984ad132a8 (PM / QoS: Introcuce latency tolerance device PM QoS type) Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-14PM / wakeirq: report a wakeup_event on dedicated wekup irqGrygorii Strashko1-0/+7
There are two reasons for reporting wakeup event when dedicated wakeup IRQ is triggered: - wakeup events accounting, so proper statistical data will be displayed in sysfs and debugfs; - there are small window when System is entering suspend during which dedicated wakeup IRQ can be lost: dpm_suspend_noirq() |- device_wakeup_arm_wake_irqs() |- dev_pm_arm_wake_irq(X) |- IRQ is enabled and marked as wakeup source [1]... |- suspend_device_irqs() |- suspend_device_irq(X) |- irqd_set(X, IRQD_WAKEUP_ARMED); |- wakup IRQ armed The wakeup IRQ can be lost if it's triggered at point [1] and not armed yet. Hence, fix above cases by adding simple pm_wakeup_event() call in handle_threaded_wake_irq(). Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling) Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> [ tony@atomide.com: added missing return to avoid warnings ] Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-14PM / wakeirq: Fix spurious wake-up events for dedicated wakeirqsGrygorii Strashko1-0/+3
Dedicated wakeirq is a one time event to wake-up the system from low-power state and then call pm_runtime_resume() on the device wired with the dedicated wakeirq. Sometimes dedicated wakeirqs can get deferred if they trigger after we call disable_irq_nosync() in dev_pm_disable_wake_irq(). This can happen if pm_runtime_get() is called around the same time a wakeirq fires. If an interrupt fires after disable_irq_nosync(), by default it will get tagged with IRQS_PENDING and will run later on when the interrupt is enabled again. Deferred wakeirqs usually just produce pointless wake-up events. But they can also cause suspend to fail if the deferred wakeirq fires during dpm_suspend_noirq() for example. So we really don't want to see the deferred wakeirqs triggering after the device has resumed. Let's fix the issue by setting IRQ_DISABLE_UNLAZY flag for the dedicated wakeirqs. The other option would be to implement irq_disable() in the dedicated wakeirq controller, but that's not a generic solution. For reference below is what happens with a IRQ_TYPE_EDGE_BOTH IRQ type wakeirq: - resume by dedicated IRQ (EDGE_FALLING) - suspend_enter() .... - arch_suspend_enable_irqs() |- dedicated IRQ armed and fired |- irq_pm_check_wakeup() |- disarm, disable IRQ and mark as IRQS_PENDING .... - dpm_resume_noirq() |- resume_device_irqs() |- __enable_irq() |- check_irq_resend() |- handle_threaded_wake_irq() |- dedicated IRQ processed |- device_wakeup_disarm_wake_irqs() |- disable_irq_wake() .... !-> dedicated IRQ (EDGE_RISING) -| handle_edge_irq() |- IRQ disabled: mask_ack_irq and mark as IRQS_PENDING .... - subsequent suspend .... |- dpm_suspend_noirq() |- device_wakeup_arm_wake_irqs() |- __enable_irq() |- check_irq_resend() (a) |- handle_threaded_wake_irq() |- pm_wakeup_event() --> abort suspend .... |- suspend_device_irqs() |- suspend_device_irq() |- dedicated IRQ armed .... (b) |- resend_irqs |- irq_pm_check_wakeup() |- IRQ armed -> abort suspend because of pending IRQ System suspend can be aborted at points (a)-not armed or (b)-armed. Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling) Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> [ tony@atomide.com: added a comment, updated the description ] Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-14PM / wakeirq: Enable dedicated wakeirq for suspendGrygorii Strashko1-2/+10
We currently rely on runtime PM to enable dedicated wakeirq for suspend. This assumption fails in the following two cases: 1. If the consumer driver does not have runtime PM implemented, the dedicated wakeirq never gets enabled for suspend 2. If the consumer driver has runtime PM implemented, but does not idle in suspend Let's fix the issue by always enabling the dedicated wakeirq during suspend. Depends-on: bed570307ed7 (PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend) Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling) Reported-by: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> [ tony@atomide.com: updated based on bed570307ed7, added description ] Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-10Merge OPP material for v4.11 to satisfy dependencies.Rafael J. Wysocki4-795/+476
2017-02-10PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp APIDave Gerlach1-4/+5
Rename _of_get_opp_desc_node to dev_pm_opp_of_get_opp_desc_node and add it to include/linux/pm_opp.h to allow other drivers, such as platform OPP and cpufreq drivers, to make use of it. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-09Merge tag 'irqchip-for-4.11' of ↵Thomas Gleixner2-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for 4.11 from Marc Zyngier - A number of gic-v3-its cleanups and fixes - A fix for the MIPS GIC - One new interrupt controller for the Cortina Gemini platform - Support for the Qualcomm interrupt combiner, together with its ACPI goodness
2017-02-09PM / Domains: Fix asynchronous execution of *noirq() callbacksUlf Hansson1-29/+39
As the PM core may invoke the *noirq() callbacks asynchronously, the current lock-less approach in genpd doesn't work. The consequence is that we may find concurrent operations racing to power on/off the PM domain. As of now, no immediate errors has been reported, but it's probably only a matter time. Therefor let's fix the problem now before this becomes a real issue, by deploying the locking scheme to the relevant functions. Reported-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-08PM / Domains: Correct comment in irq_safe_dev_in_no_sleep_domain()Ulf Hansson1-1/+1
The earlier comment stated that the dev_warn_once() was going to be printed once per device. Let's fix that, as dev_warn_once() is printed only once, no matter of the device. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07PM / OPP: Make _find_opp_table_unlocked() staticWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/base/power/opp/core.c:49:18: warning: symbol '_find_opp_table_unlocked' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07device property: export code duplicating array of property entriesDmitry Torokhov1-65/+129
When augmenting ACPI-enumerated devices with additional property data based on DMI info, a module has often several potential property sets, with only one being active on a given box. In order to save memory it should be possible to mark everything and __initdata or __initconst, execute DMI match early, and duplicate relevant properties. Then kernel will discard the rest of them. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07device property: constify property arrays valuesDmitry Torokhov1-5/+5
Data that is fed into property arrays should not be modified, so let's mark relevant pointers as const. This will allow us making source arrays as const/__initconst. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07device property: allow to constify propertiesDmitry Torokhov1-20/+21
There is no reason why statically defined properties should be modifiable, so let's make device_add_properties() and the rest of pset_*() functions to take const pointers to properties. This will allow us to mark properties as const/__initconst at definition sites. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-06Merge branches 'pm-core-fixes' and 'pm-cpufreq-fixes'Rafael J. Wysocki1-5/+6
* pm-core-fixes: PM / runtime: Avoid false-positive warnings from might_sleep_if() * pm-cpufreq-fixes: cpufreq: intel_pstate: Disable energy efficiency optimization cpufreq: brcmstb-avs-cpufreq: properly retrieve P-state upon suspend cpufreq: brcmstb-avs-cpufreq: extend sysfs entry brcm_avs_pmap
2017-02-04Merge tag 'char-misc-4.10-rc7' of ↵Linus Torvalds1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are two bugfixes that resolve some reported issues. One in the firmware loader, that should fix the much-reported problem of crashes with it. The other is a hyperv fix for a reported regression. Both have been in linux-next for a week or so with no reported issues" * tag 'char-misc-4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Drivers: hv: vmbus: finally fix hv_need_to_signal_on_read() firmware: fix NULL pointer dereference in __fw_load_abort()
2017-02-04PM / runtime: Avoid false-positive warnings from might_sleep_if()Rafael J. Wysocki1-5/+6
The might_sleep_if() assertions in __pm_runtime_idle(), __pm_runtime_suspend() and __pm_runtime_resume() may generate false-positive warnings in some situations. For example, that happens if a nested pm_runtime_get_sync()/pm_runtime_put() pair is executed with disabled interrupts within an outer pm_runtime_get_sync()/pm_runtime_put() section for the same device. [Generally, pm_runtime_get_sync() may sleep, so it should not be called with disabled interrupts, but in this particular case the previous pm_runtime_get_sync() guarantees that the device will not be suspended, so the inner pm_runtime_get_sync() will return immediately after incrementing the device's usage counter.] That started to happen in the i915 driver in 4.10-rc, leading to the following splat: BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1032 in_atomic(): 1, irqs_disabled(): 0, pid: 1500, name: Xorg 1 lock held by Xorg/1500: #0: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0680c13>] i915_mutex_lock_interruptible+0x43/0x140 [i915] CPU: 0 PID: 1500 Comm: Xorg Not tainted Call Trace: dump_stack+0x85/0xc2 ___might_sleep+0x196/0x260 __might_sleep+0x53/0xb0 __pm_runtime_resume+0x7a/0x90 intel_runtime_pm_get+0x25/0x90 [i915] aliasing_gtt_bind_vma+0xaa/0xf0 [i915] i915_vma_bind+0xaf/0x1e0 [i915] i915_gem_execbuffer_relocate_entry+0x513/0x6f0 [i915] i915_gem_execbuffer_relocate_vma.isra.34+0x188/0x250 [i915] ? trace_hardirqs_on+0xd/0x10 ? i915_gem_execbuffer_reserve_vma.isra.31+0x152/0x1f0 [i915] ? i915_gem_execbuffer_reserve.isra.32+0x372/0x3a0 [i915] i915_gem_do_execbuffer.isra.38+0xa70/0x1a40 [i915] ? __might_fault+0x4e/0xb0 i915_gem_execbuffer2+0xc5/0x260 [i915] ? __might_fault+0x4e/0xb0 drm_ioctl+0x206/0x450 [drm] ? i915_gem_execbuffer+0x340/0x340 [i915] ? __fget+0x5/0x200 do_vfs_ioctl+0x91/0x6f0 ? __fget+0x111/0x200 ? __fget+0x5/0x200 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc6 even though the code triggering it is correct. Unfortunately, the might_sleep_if() assertions in question are too coarse-grained to cover such cases correctly, so make them a bit less sensitive in order to avoid the false-positives. Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-04base/memory, hotplug: fix a kernel oops in show_valid_zones()Toshi Kani1-6/+6
Reading a sysfs "memoryN/valid_zones" file leads to the following oops when the first page of a range is not backed by struct page. show_valid_zones() assumes that 'start_pfn' is always valid for page_zone(). BUG: unable to handle kernel paging request at ffffea017a000000 IP: show_valid_zones+0x6f/0x160 This issue may happen on x86-64 systems with 64GiB or more memory since their memory block size is bumped up to 2GiB. [1] An example of such systems is desribed below. 0x3240000000 is only aligned by 1GiB and this memory block starts from 0x3200000000, which is not backed by struct page. BIOS-e820: [mem 0x0000003240000000-0x000000603fffffff] usable Since test_pages_in_a_zone() already checks holes, fix this issue by extending this function to return 'valid_start' and 'valid_end' for a given range. show_valid_zones() then proceeds with the valid range. [1] 'Commit bdee237c0343 ("x86: mm: Use 2GB memory block size on large-memory x86-64 systems")' Link: http://lkml.kernel.org/r/20170127222149.30893-3-toshi.kani@hpe.com Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Zhang Zhen <zhenzhang.zhang@huawei.com> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> [4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-03ACPI: Add support for ResourceSource/IRQ domain mappingAgustin Vega-Frias1-0/+10
ACPI extended IRQ resources may contain a ResourceSource to specify an alternate interrupt controller. Introduce acpi_irq_get and use it to implement ResourceSource/IRQ domain mapping. The new API is similar to of_irq_get and allows re-initialization of a platform resource from the ACPI extended IRQ resource, and provides proper behavior for probe deferral when the domain is not yet present when called. Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-03Merge remote-tracking branches 'regmap/topic/doc' and 'regmap/topic/rbtree' ↵Mark Brown4-101/+117
into regmap-next
2017-02-03Merge tag 'regmap-v4.10' into regmap-nextMark Brown1-6/+2
regmap: Fix for v4.10 The only change for regmap this merge window is a single fix for an unused variable. # gpg: Signature made Mon 12 Dec 2016 17:03:19 CET # gpg: using RSA key ADE668AA675718B59FE29FEA24D68B725D5487D0 # gpg: issuer "broonie@kernel.org" # gpg: key 0D9EACE2CD7BEEBC: no public key for trusted key - skipped # gpg: key 0D9EACE2CD7BEEBC marked as ultimately trusted # gpg: key CCB0A420AF88CD16: no public key for trusted key - skipped # gpg: key CCB0A420AF88CD16 marked as ultimately trusted # gpg: key 162614E316005C11: no public key for trusted key - skipped # gpg: key 162614E316005C11 marked as ultimately trusted # gpg: key A730C53A5621E907: no public key for trusted key - skipped # gpg: key A730C53A5621E907 marked as ultimately trusted # gpg: key 276568D75C6153AD: no public key for trusted key - skipped # gpg: key 276568D75C6153AD marked as ultimately trusted # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" [ultimate] # gpg: aka "Mark Brown <broonie@debian.org>" [ultimate] # gpg: aka "Mark Brown <broonie@kernel.org>" [ultimate] # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" [ultimate] # gpg: aka "Mark Brown <broonie@linaro.org>" [ultimate] # gpg: aka "Mark Brown <Mark.Brown@linaro.org>" [ultimate]
2017-01-30CPU / PM: expose pm_qos_resume_latency for CPUsAlex Shi1-0/+2
The cpu-dma PM QoS constraint impacts all the cpus in the system. There is no way to let the user to choose a PM QoS constraint per cpu. The following patch exposes to the userspace a per cpu based sysfs file in order to let the userspace to change the value of the PM QoS latency constraint. This change is inoperative in its form and the cpuidle governors have to take into account the per cpu latency constraint in addition to the global cpu-dma latency constraint in order to operate properly. BTW The pm_qos_resume_latency usage defined in Documentation/ABI/testing/sysfs-devices-power The /sys/devices/.../power/pm_qos_resume_latency_us attribute contains the PM QoS resume latency limit for the given device, which is the maximum allowed time it can take to resume the device, after it has been suspended at run time, from a resume request to the moment the device will be ready to process I/O, in microseconds. If it is equal to 0, however, this means that the PM QoS resume latency may be arbitrary. Signed-off-by: Alex Shi <alex.shi@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-30PM / OPP: Simplify dev_pm_opp_get_max_volt_latency()Viresh Kumar1-25/+9
dev_pm_opp_get_max_volt_latency() calls _find_opp_table() two times effectively. Merge _get_regulator_count() into dev_pm_opp_get_max_volt_latency() to avoid that. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-30PM / OPP: Simplify _opp_set_availability()Viresh Kumar1-22/+5
As we don't use RCU locking anymore, there is no need to replace an earlier OPP node with a new one. Just update the existing one. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>