summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)AuthorFilesLines
2022-06-04Merge tag 'for-linus-5.19-rc1b-tag' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: "Two cleanup patches for Xen related code and (more important) an update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step down" * tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: replace xen_remap() with memremap() MAINTAINERS: Update Xen maintainership xen: switch gnttab_end_foreign_access() to take a struct page pointer
2022-06-03Merge tag 'for-5.19/drivers-2022-06-02' of git://git.kernel.dk/linux-blockLinus Torvalds5-59/+82
Pull more block driver updates from Jens Axboe: "A collection of stragglers that were late on sending in their changes and just followup fixes. - NVMe fixes pull request via Christoph: - set controller enable bit in a separate write (Niklas Cassel) - disable namespace identifiers for the MAXIO MAP1001 (Christoph) - fix a comment typo (Julia Lawall)" - MD fixes pull request via Song: - Remove uses of bdevname (Christoph Hellwig) - Bug fixes (Guoqing Jiang, and Xiao Ni) - bcache fixes series (Coly) - null_blk zoned write fix (Damien) - nbd fixes (Yu, Zhang) - Fix for loop partition scanning (Christoph)" * tag 'for-5.19/drivers-2022-06-02' of git://git.kernel.dk/linux-block: (23 commits) block: null_blk: Fix null_zone_write() nvmet: fix typo in comment nvme: set controller enable bit in a separate write nvme-pci: disable namespace identifiers for the MAXIO MAP1001 bcache: avoid unnecessary soft lockup in kworker update_writeback_rate() nbd: use pr_err to output error message nbd: fix possible overflow on 'first_minor' in nbd_dev_add() nbd: fix io hung while disconnecting device nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completed nbd: fix race between nbd_alloc_config() and module removal nbd: call genl_unregister_family() first in nbd_cleanup() md: bcache: check the return value of kzalloc() in detached_dev_do_request() bcache: memset on stack variables in bch_btree_check() and bch_sectors_dirty_init() block, loop: support partitions without scanning bcache: avoid journal no-space deadlock by reserving 1 journal bucket bcache: remove incremental dirty sector counting for bch_sectors_dirty_init() bcache: improve multithreaded bch_sectors_dirty_init() bcache: improve multithreaded bch_btree_check() md: fix double free of io_acct_set bioset md: Don't set mddev private to NULL in raid0 pers->free ...
2022-06-03Merge tag 'for-5.19/block-exec-2022-06-02' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+2
Pull block request execute cleanups from Jens Axboe: "This change was advertised in the initial core block pull request, but didn't actually make that branch as we deferred it to a post-merge pull request to avoid a bunch of cross branch issues. This series cleans up the block execute path quite nicely" * tag 'for-5.19/block-exec-2022-06-02' of git://git.kernel.dk/linux-block: blk-mq: remove the done argument to blk_execute_rq_nowait blk-mq: avoid a mess of casts for blk_end_sync_rq blk-mq: remove __blk_execute_rq_nowait
2022-06-03Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-19/+201
Pull virtio updates from Michael Tsirkin: "vhost,virtio and vdpa features, fixes, and cleanups: - mac vlan filter and stats support in mlx5 vdpa - irq hardening in virtio - performance improvements in virtio crypto - polling i/o support in virtio blk - ASID support in vhost - fixes, cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits) vdpa: ifcvf: set pci driver data in probe vdpa/mlx5: Add RX MAC VLAN filter support vdpa/mlx5: Remove flow counter from steering vhost: rename vhost_work_dev_flush vhost-test: drop flush after vhost_dev_cleanup vhost-scsi: drop flush after vhost_dev_cleanup vhost_vsock: simplify vhost_vsock_flush() vhost_test: remove vhost_test_flush_vq() vhost_net: get rid of vhost_net_flush_vq() and extra flush calls vhost: flush dev once during vhost_dev_stop vhost: get rid of vhost_poll_flush() wrapper vhost-vdpa: return -EFAULT on copy_to_user() failure vdpasim: Off by one in vdpasim_set_group_asid() virtio: Directly use ida_alloc()/free() virtio: use WARN_ON() to warning illegal status value virtio: harden vring IRQ virtio: allow to unbreak virtqueue virtio-ccw: implement synchronize_cbs() virtio-mmio: implement synchronize_cbs() virtio-pci: implement synchronize_cbs() ...
2022-06-02Merge tag 'ceph-for-5.19-rc1' of https://github.com/ceph/ceph-clientLinus Torvalds1-7/+6
Pull ceph updates from Ilya Dryomov: "A big pile of assorted fixes and improvements for the filesystem with nothing in particular standing out, except perhaps that the fact that the MDS never really maintained atime was made official and thus it's no longer updated on the client either. We also have a MAINTAINERS update: Jeff is transitioning his filesystem maintainership duties to Xiubo" * tag 'ceph-for-5.19-rc1' of https://github.com/ceph/ceph-client: (23 commits) MAINTAINERS: move myself from ceph "Maintainer" to "Reviewer" ceph: fix decoding of client session messages flags ceph: switch TASK_INTERRUPTIBLE to TASK_KILLABLE ceph: remove redundant variable ino ceph: try to queue a writeback if revoking fails ceph: fix statfs for subdir mounts ceph: fix possible deadlock when holding Fwb to get inline_data ceph: redirty the page for writepage on failure ceph: try to choose the auth MDS if possible for getattr ceph: disable updating the atime since cephfs won't maintain it ceph: flush the mdlog for filesystem sync ceph: rename unsafe_request_wait() libceph: use swap() macro instead of taking tmp variable ceph: fix statx AT_STATX_DONT_SYNC vs AT_STATX_FORCE_SYNC check ceph: no need to invalidate the fscache twice ceph: replace usage of found with dedicated list iterator variable ceph: use dedicated list iterator variable ceph: update the dlease for the hashed dentry when removing ceph: stop retrying the request when exceeding 256 times ceph: stop forwarding the request when exceeding 256 times ...
2022-06-02block: null_blk: Fix null_zone_write()Damien Le Moal3-9/+10
The bio and rq fields of struct nullb_cmd are now overlapping in a union. So we cannot use a test on ->bio being non-NULL to detect the NULL_Q_BIO queue mode. null_zone_write() use such broken test to set the sector position of a zone append write in the command bio or request. When the null_blk device uses the NULL_Q_MQ queue mode, null_zone_write() wrongly end up setting the bio sector position, resulting in the command request to be broken and random crashes following. Fix this by testing the device queue mode directly. Fixes: 8ba816b23abd ("null-blk: save memory footprint for struct nullb_cmd") Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220602120344.1365329-1-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-31virtio-blk: support mq_ops->queue_rqs()Suwan Kim1-16/+98
This patch supports mq_ops->queue_rqs() hook. It has an advantage of batch submission to virtio-blk driver. It also helps polling I/O because polling uses batched completion of block layer. Batch submission in queue_rqs() can boost polling performance. In queue_rqs(), it iterates plug->mq_list, collects requests that belong to same HW queue until it encounters a request from other HW queue or sees the end of the list. Then, virtio-blk adds requests into virtqueue and kicks virtqueue to submit requests. If there is an error, it inserts error request to requeue_list and passes it to ordinary block layer path. For verification, I did fio test. (io_uring, randread, direct=1, bs=4K, iodepth=64 numjobs=N) I set 4 vcpu and 2 virtio-blk queues for VM and run fio test 5 times. It shows about 2% improvement. | numjobs=2 | numjobs=4 ----------------------------------------------------------- fio without queue_rqs() | 291K IOPS | 238K IOPS ----------------------------------------------------------- fio with queue_rqs() | 295K IOPS | 243K IOPS For polling I/O performance, I also did fio test as below. (io_uring, hipri, randread, direct=1, bs=512, iodepth=64 numjobs=4) I set 4 vcpu and 2 poll queues for VM. It shows about 2% improvement in polling I/O. | IOPS | avg latency ----------------------------------------------------------- fio poll without queue_rqs() | 424K | 613.05 usec ----------------------------------------------------------- fio poll with queue_rqs() | 435K | 601.01 usec Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Message-Id: <20220406153207.163134-3-suwan.kim027@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
2022-05-31virtio-blk: support polling I/OSuwan Kim1-3/+103
This patch supports polling I/O via virtio-blk driver. Polling feature is enabled by module parameter "poll_queues" and it sets dedicated polling queues for virtio-blk. This patch improves the polling I/O throughput and latency. The virtio-blk driver doesn't not have a poll function and a poll queue and it has been operating in interrupt driven method even if the polling function is called in the upper layer. virtio-blk polling is implemented upon 'batched completion' of block layer. virtblk_poll() queues completed request to io_comp_batch->req_list and later, virtblk_complete_batch() calls unmap function and ends the requests in batch. virtio-blk reads the number of poll queues from module parameter "poll_queues". If VM sets queue parameter as below, ("num-queues=N" [QEMU property], "poll_queues=M" [module parameter]) It allocates N virtqueues to virtio_blk->vqs[N] and it uses [0..(N-M-1)] as default queues and [(N-M)..(N-1)] as poll queues. Unlike the default queues, the poll queues have no callback function. Regarding HW-SW queue mapping, the default queue mapping uses the existing method that condsiders MSI irq vector. But the poll queue doesn't have an irq, so it uses the regular blk-mq cpu mapping. For verifying the improvement, I did Fio polling I/O performance test with io_uring engine with the options below. (io_uring, hipri, randread, direct=1, bs=512, iodepth=64 numjobs=N) I set 4 vcpu and 4 virtio-blk queues - 2 default queues and 2 poll queues for VM. As a result, IOPS and average latency improved about 10%. Test result: - Fio io_uring poll without virtio-blk poll support -- numjobs=1 : IOPS = 339K, avg latency = 188.33us -- numjobs=2 : IOPS = 367K, avg latency = 347.33us -- numjobs=4 : IOPS = 383K, avg latency = 682.06us - Fio io_uring poll with virtio-blk poll support -- numjobs=1 : IOPS = 385K, avg latency = 165.94us -- numjobs=2 : IOPS = 408K, avg latency = 313.28us -- numjobs=4 : IOPS = 424K, avg latency = 613.05us Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Message-Id: <20220406153207.163134-2-suwan.kim027@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
2022-05-28blk-mq: remove the done argument to blk_execute_rq_nowaitChristoph Hellwig1-2/+2
Let the caller set it together with the end_io_data instead of passing a pointless argument. Note the the target code did in fact already set it and then just overrode it again by calling blk_execute_rq_nowait. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220524121530.943123-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-28nbd: use pr_err to output error messageYu Kuai1-22/+18
Instead of using the long printk(KERN_ERR "nbd: ...") to output error message, defining pr_fmt and using the short pr_err("") to do that. The replacemen is done by using the following command: sed -i 's/printk(KERN_ERR "nbd: /pr_err("/g' \ drivers/block/nbd.c This patch also rewrap to 80 columns where possible. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220521073749.3146892-7-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-28nbd: fix possible overflow on 'first_minor' in nbd_dev_add()Zhang Wensheng1-11/+12
When 'index' is a big numbers, it may become negative which forced to 'int'. then 'index << part_shift' might overflow to a positive value that is not greater than '0xfffff', then sysfs might complains about duplicate creation. Because of this, move the 'index' judgment to the front will fix it and be better. Fixes: b0d9111a2d53 ("nbd: use an idr to keep track of nbd devices") Fixes: 940c264984fd ("nbd: fix possible overflow for 'first_minor' in nbd_dev_add()") Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220521073749.3146892-6-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-28nbd: fix io hung while disconnecting deviceYu Kuai1-1/+1
In our tests, "qemu-nbd" triggers a io hung: INFO: task qemu-nbd:11445 blocked for more than 368 seconds. Not tainted 5.18.0-rc3-next-20220422-00003-g2176915513ca #884 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:qemu-nbd state:D stack: 0 pid:11445 ppid: 1 flags:0x00000000 Call Trace: <TASK> __schedule+0x480/0x1050 ? _raw_spin_lock_irqsave+0x3e/0xb0 schedule+0x9c/0x1b0 blk_mq_freeze_queue_wait+0x9d/0xf0 ? ipi_rseq+0x70/0x70 blk_mq_freeze_queue+0x2b/0x40 nbd_add_socket+0x6b/0x270 [nbd] nbd_ioctl+0x383/0x510 [nbd] blkdev_ioctl+0x18e/0x3e0 __x64_sys_ioctl+0xac/0x120 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fd8ff706577 RSP: 002b:00007fd8fcdfebf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000040000000 RCX: 00007fd8ff706577 RDX: 000000000000000d RSI: 000000000000ab00 RDI: 000000000000000f RBP: 000000000000000f R08: 000000000000fbe8 R09: 000055fe497c62b0 R10: 00000002aff20000 R11: 0000000000000246 R12: 000000000000006d R13: 0000000000000000 R14: 00007ffe82dc5e70 R15: 00007fd8fcdff9c0 "qemu-ndb -d" will call ioctl 'NBD_DISCONNECT' first, however, following message was found: block nbd0: Send disconnect failed -32 Which indicate that something is wrong with the server. Then, "qemu-nbd -d" will call ioctl 'NBD_CLEAR_SOCK', however ioctl can't clear requests after commit 2516ab1543fd("nbd: only clear the queue on device teardown"). And in the meantime, request can't complete through timeout because nbd_xmit_timeout() will always return 'BLK_EH_RESET_TIMER', which means such request will never be completed in this situation. Now that the flag 'NBD_CMD_INFLIGHT' can make sure requests won't complete multiple times, switch back to call nbd_clear_sock() in nbd_clear_sock_ioctl(), so that inflight requests can be cleared. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220521073749.3146892-5-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-28nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completedYu Kuai1-4/+14
Otherwise io will hung because request will only be completed if the cmd has the flag 'NBD_CMD_INFLIGHT'. Fixes: 07175cb1baf4 ("nbd: make sure request completion won't concurrent") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20220521073749.3146892-4-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-28nbd: fix race between nbd_alloc_config() and module removalYu Kuai1-9/+19
When nbd module is being removing, nbd_alloc_config() may be called concurrently by nbd_genl_connect(), although try_module_get() will return false, but nbd_alloc_config() doesn't handle it. The race may lead to the leak of nbd_config and its related resources (e.g, recv_workq) and oops in nbd_read_stat() due to the unload of nbd module as shown below: BUG: kernel NULL pointer dereference, address: 0000000000000040 Oops: 0000 [#1] SMP PTI CPU: 5 PID: 13840 Comm: kworker/u17:33 Not tainted 5.14.0+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Workqueue: knbd16-recv recv_work [nbd] RIP: 0010:nbd_read_stat.cold+0x130/0x1a4 [nbd] Call Trace: recv_work+0x3b/0xb0 [nbd] process_one_work+0x1ed/0x390 worker_thread+0x4a/0x3d0 kthread+0x12a/0x150 ret_from_fork+0x22/0x30 Fixing it by checking the return value of try_module_get() in nbd_alloc_config(). As nbd_alloc_config() may return ERR_PTR(-ENODEV), assign nbd->config only when nbd_alloc_config() succeeds to ensure the value of nbd->config is binary (valid or NULL). Also adding a debug message to check the reference counter of nbd_config during module removal. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220521073749.3146892-3-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-28nbd: call genl_unregister_family() first in nbd_cleanup()Yu Kuai1-1/+6
Otherwise there may be race between module removal and the handling of netlink command, which can lead to the oops as shown below: BUG: kernel NULL pointer dereference, address: 0000000000000098 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 31299 Comm: nbd-client Tainted: G E 5.14.0-rc4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:down_write+0x1a/0x50 Call Trace: start_creating+0x89/0x130 debugfs_create_dir+0x1b/0x130 nbd_start_device+0x13d/0x390 [nbd] nbd_genl_connect+0x42f/0x748 [nbd] genl_family_rcv_msg_doit.isra.0+0xec/0x150 genl_rcv_msg+0xe5/0x1e0 netlink_rcv_skb+0x55/0x100 genl_rcv+0x29/0x40 netlink_unicast+0x1a8/0x250 netlink_sendmsg+0x21b/0x430 ____sys_sendmsg+0x2a4/0x2d0 ___sys_sendmsg+0x81/0xc0 __sys_sendmsg+0x62/0xb0 __x64_sys_sendmsg+0x1f/0x30 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: nbd(E-) Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220521073749.3146892-2-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-27block, loop: support partitions without scanningChristoph Hellwig1-4/+4
Historically we did distinguish between a flag that surpressed partition scanning, and a combinations of the minors variable and another flag if any partitions were supported. This was generally confusing and doesn't make much sense, but some corner case uses of the loop driver actually do want to support manually added partitions on a device that does not actively scan for partitions. To make things worsee the loop driver also wants to dynamically toggle the scanning for partitions on a live gendisk, which makes the disk->flags updates non-atomic. Introduce a new GD_SUPPRESS_PART_SCAN bit in disk->state that disables just scanning for partitions, and toggle that instead of GENHD_FL_NO_PART in the loop driver. Fixes: 1ebe2e5f9d68 ("block: remove GENHD_FL_EXT_DEVT") Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220527055806.1972352-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-27xen: switch gnttab_end_foreign_access() to take a struct page pointerJuergen Gross1-3/+3
Instead of a virtual kernel address use a pointer of the associated struct page as second parameter of gnttab_end_foreign_access(). Most users have that pointer available already and are creating the virtual address from it, risking problems in case the memory is located in highmem. gnttab_end_foreign_access() itself won't need to get the struct page from the address again. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-26Merge tag 'mm-stable-2022-05-25' of ↵Linus Torvalds4-40/+20
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Almost all of MM here. A few things are still getting finished off, reviewed, etc. - Yang Shi has improved the behaviour of khugepaged collapsing of readonly file-backed transparent hugepages. - Johannes Weiner has arranged for zswap memory use to be tracked and managed on a per-cgroup basis. - Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime enablement of the recent huge page vmemmap optimization feature. - Baolin Wang contributes a series to fix some issues around hugetlb pagetable invalidation. - Zhenwei Pi has fixed some interactions between hwpoisoned pages and virtualization. - Tong Tiangen has enabled the use of the presently x86-only page_table_check debugging feature on arm64 and riscv. - David Vernet has done some fixup work on the memcg selftests. - Peter Xu has taught userfaultfd to handle write protection faults against shmem- and hugetlbfs-backed files. - More DAMON development from SeongJae Park - adding online tuning of the feature and support for monitoring of fixed virtual address ranges. Also easier discovery of which monitoring operations are available. - Nadav Amit has done some optimization of TLB flushing during mprotect(). - Neil Brown continues to labor away at improving our swap-over-NFS support. - David Hildenbrand has some fixes to anon page COWing versus get_user_pages(). - Peng Liu fixed some errors in the core hugetlb code. - Joao Martins has reduced the amount of memory consumed by device-dax's compound devmaps. - Some cleanups of the arch-specific pagemap code from Anshuman Khandual. - Muchun Song has found and fixed some errors in the TLB flushing of transparent hugepages. - Roman Gushchin has done more work on the memcg selftests. ... and, of course, many smaller fixes and cleanups. Notably, the customary million cleanup serieses from Miaohe Lin" * tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits) mm: kfence: use PAGE_ALIGNED helper selftests: vm: add the "settings" file with timeout variable selftests: vm: add "test_hmm.sh" to TEST_FILES selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests selftests: vm: add migration to the .gitignore selftests/vm/pkeys: fix typo in comment ksm: fix typo in comment selftests: vm: add process_mrelease tests Revert "mm/vmscan: never demote for memcg reclaim" mm/kfence: print disabling or re-enabling message include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace" include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion" mm: fix a potential infinite loop in start_isolate_page_range() MAINTAINERS: add Muchun as co-maintainer for HugeTLB zram: fix Kconfig dependency warning mm/shmem: fix shmem folio swapoff hang cgroup: fix an error handling path in alloc_pagecache_max_30M() mm: damon: use HPAGE_PMD_SIZE tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate nodemask.h: fix compilation error with GCC12 ...
2022-05-25rbd: replace usage of found with dedicated list iterator variableJakob Koschel1-7/+6
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-05-25zram: fix Kconfig dependency warningRandy Dunlap1-1/+1
ZSMALLOC depends on MMU so ZRAM should also depend on MMU since 'select' does not follow any dependency chains. Fixes this Kconfig warning: WARNING: unmet direct dependencies detected for ZSMALLOC Depends on [n]: MMU [=n] Selected by [y]: - ZRAM [=y] && BLK_DEV [=y] && BLOCK [=y] && SYSFS [=y] && (CRYPTO_LZO [=y] || CRYPTO_ZSTD [=m] || CRYPTO_LZ4 [=m] || CRYPTO_LZ4HC [=n] || CRYPTO_842 [=n]) Link: https://lkml.kernel.org/r/20220522204027.22964-1-rdunlap@infradead.org Fixes: b3fbd58fcbb10 ("mm: Kconfig: simplify zswap configuration") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-24Merge tag 'for-linus-5.19-rc1-tag' of ↵Linus Torvalds1-40/+17
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - decouple the PV interface from kernel internals in the Xen scsifront/scsiback pv drivers - harden the Xen scsifront PV driver against a malicious backend driver - simplify Xen PV frontend driver ring page setup - support Xen setups with multiple domains created at boot time to tolerate Xenstore coming up late - two small cleanup patches * tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits) xen: add support for initializing xenstore later as HVM domain xen: sync xs_wire.h header with upstream xen x86: xen: remove STACK_FRAME_NON_STANDARD from xen_cpuid xen-blk{back,front}: Update contact points for buffer_squeeze_duration_ms and feature_persistent xen/xenbus: eliminate xenbus_grant_ring() xen/sndfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/usbfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/scsifront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/pcifront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/drmfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/tpmfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/netfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/blkfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/xenbus: add xenbus_setup_ring() service function xen: update ring.h xen/shbuf: switch xen-front-pgdir-shbuf to use INVALID_GRANT_REF xen/dmabuf: switch gntdev-dmabuf to use INVALID_GRANT_REF xen/sound: switch xen_snd_front to use INVALID_GRANT_REF xen/drm: switch xen_drm_front to use INVALID_GRANT_REF xen/usb: switch xen-hcd to use INVALID_GRANT_REF ...
2022-05-24Merge tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-blockLinus Torvalds24-381/+343
Pull block driver updates from Jens Axboe: "Here are the driver updates queued up for 5.19. This contains: - NVMe pull requests via Christoph: - tighten the PCI presence check (Stefan Roese) - fix a potential NULL pointer dereference in an error path (Kyle Miller Smith) - fix interpretation of the DMRSL field (Tom Yan) - relax the data transfer alignment (Keith Busch) - verbose error logging improvements (Max Gurtovoy, Chaitanya Kulkarni) - misc cleanups (Chaitanya Kulkarni, Christoph) - set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni) - add support for TP4084 - Time-to-Ready Enhancements (Christoph) - MD pull request via Song: - Improve annotation in raid5 code, by Logan Gunthorpe - Support MD_BROKEN flag in raid-1/5/10, by Mariusz Tkaczyk - Other small fixes/cleanups - null_blk series making the configfs side much saner (Damien) - Various minor drbd cleanups and fixes (Haowen, Uladzislau, Jiapeng, Arnd, Cai) - Avoid using the system workqueue (and hence flushing it) in rnbd (Jack) - Avoid using the system workqueue (and hence flushing it) in aoe (Tetsuo) - Series fixing discard_alignment issues in drivers (Christoph) - Small series fixing drivers poking at disk->part0 for openers information (Christoph) - Series fixing deadlocks in loop (Christoph, Tetsuo) - Remove loop.h and add SPDX headers (Christoph) - Various fixes and cleanups (Julia, Xie, Yu)" * tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block: (72 commits) mtip32xx: fix typo in comment nvme: set non-mdts limits in nvme_scan_work nvme: add support for TP4084 - Time-to-Ready Enhancements nvme: split the enum used for various register constants nbd: Fix hung on disconnect request if socket is closed before nvme-fabrics: add a request timeout helper nvme-pci: harden drive presence detect in nvme_dev_disable() nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags nvme: mark internal passthru request RQF_QUIET nvme: remove unneeded include from constants file nvme: add missing status values to verbose logging nvme: set dma alignment to dword nvme: fix interpretation of DMRSL loop: remove most the top-of-file boilerplate comment from the UAPI header loop: remove most the top-of-file boilerplate comment loop: add a SPDX header loop: remove loop.h block: null_blk: Improve device creation with configfs block: null_blk: Cleanup messages block: null_blk: Cleanup device creation and deletion ...
2022-05-23Merge tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-blockLinus Torvalds16-163/+122
Pull block updates from Jens Axboe: "Here are the core block changes for 5.19. This contains: - blk-throttle accounting fix (Laibin) - Series removing redundant assignments (Michal) - Expose bio cache via the bio_set, so that DM can use it (Mike) - Finish off the bio allocation interface cleanups by dealing with the weirdest member of the family. bio_kmalloc combines a kmalloc for the bio and bio_vecs with a hidden bio_init call and magic cleanup semantics (Christoph) - Clean up the block layer API so that APIs consumed by file systems are (almost) only struct block_device based, so that file systems don't have to poke into block layer internals like the request_queue (Christoph) - Clean up the blk_execute_rq* API (Christoph) - Clean up various lose end in the blk-cgroup code to make it easier to follow in preparation of reworking the blkcg assignment for bios (Christoph) - Fix use-after-free issues in BFQ when processes with merged queues get moved to different cgroups (Jan) - BFQ fixes (Jan) - Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming, Wolfgang, me)" * tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits) blk-mq: fix typo in comment bfq: Remove bfq_requeue_request_body() bfq: Remove superfluous conversion from RQ_BIC() bfq: Allow current waker to defend against a tentative one bfq: Relax waker detection for shared queues blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE() blk-throttle: Set BIO_THROTTLED when bio has been throttled blk-cgroup: Remove unnecessary rcu_read_lock/unlock() blk-cgroup: always terminate io.stat lines block, bfq: make bfq_has_work() more accurate block, bfq: protect 'bfqd->queued' by 'bfqd->lock' block: cleanup the VM accounting in submit_bio block: Fix the bio.bi_opf comment block: reorder the REQ_ flags blk-iocost: combine local_stat and desc_stat to stat block: improve the error message from bio_check_eod block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone block: remove superfluous calls to blkcg_bio_issue_init kthread: unexport kthread_blkcg blk-cgroup: cleanup blkcg_maybe_throttle_current ...
2022-05-21mtip32xx: fix typo in commentJulia Lawall1-1/+1
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220521111145.81697-28-Julia.Lawall@inria.fr Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-20mm: Kconfig: simplify zswap configurationJohannes Weiner1-1/+2
- CONFIG_ZRAM: Zram is a user-facing feature, whereas zsmalloc is not. Don't make the user chase down a technical dependency like that, just select it in automatically when zram is requested. The CONFIG_CRYPTO dependency is redundant due to more specific deps. - CONFIG_ZPOOL: This is not a user-facing feature. Hide the symbol and have it selected in as needed. - CONFIG_ZSWAP: Select CRYPTO instead of depend. Common pattern. - Make the ZSWAP suboptions and their descriptions (compression, allocation backend) a bit more straight-forward for the user. Link: https://lkml.kernel.org/r/20220510152847.230957-5-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19xen/blkfront: use xenbus_setup_ring() and xenbus_teardown_ring()Juergen Gross1-29/+8
Simplify blkfront's ring creation and removal via xenbus_setup_ring() and xenbus_teardown_ring(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/blkfront: switch blkfront to use INVALID_GRANT_REFJuergen Gross1-14/+12
Instead of using a private macro for an invalid grant reference use the common one. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-16nbd: Fix hung on disconnect request if socket is closed beforeXie Yongji1-4/+9
When userspace closes the socket before sending a disconnect request, the following I/O requests will be blocked in wait_for_reconnect() until dead timeout. This will cause the following disconnect request also hung on blk_mq_quiesce_queue(). That means we have no way to disconnect a nbd device if there are some I/O requests waiting for reconnecting until dead timeout. It's not expected. So let's wake up the thread waiting for reconnecting directly when a disconnect request is sent. Reported-by: Xu Jianhai <zero.xu@bytedance.com> Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220322080639.142-1-xieyongji@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-16block: remove last remaining traces of IDE documentationPaul Gortmaker1-1/+1
The last traces of the IDE driver went away in commit b7fb14d3ac63 ("ide: remove the legacy ide driver") but it left behind some traces of old documentation. As luck would have it Randy and I would submit similar changes within a week of each other to address this. As Randy's commit is in the doc tree already - this delta is just the stuff my removal contained that was not in Randy's IDE doc removal. Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Link: https://lore.kernel.org/all/20220427165917.GE12977@windriver.com [phil@philpotter.co.uk: removed diffs already added by others] Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20220515205833.944139-5-phil@philpotter.co.uk Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-13zram: remove double compression logicAlexey Romanov2-33/+10
The 2nd trial allocation under per-cpu presumption has been used to prevent regression of allocation failure. However, it makes trouble for maintenance without significant benefit. The slowpath branch is executed extremely rarely: getting there is problematic. Therefore, we delete this branch. Since b09ab054b69b ("zram: support BDI_CAP_STABLE_WRITES"), zram has used QUEUE_FLAG_STABLE_WRITES to prevent buffer change between 1st and 2nd memory allocations. Since we remove second trial memory allocation logic, we could remove the STABLE_WRITES flag because there is no change buffer to be modified under us. Link: https://lkml.kernel.org/r/20220505094443.11728-1-avromanov@sberdevices.ru Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru> Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Acked-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10loop: remove most the top-of-file boilerplate commentChristoph Hellwig1-47/+0
Remove the irrelevant changelogs and todo notes and just leave the SPDX marker and the copyright notice. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220419063303.583106-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-10loop: add a SPDX headerChristoph Hellwig1-2/+2
The copyright statement says: "Redistribution of this file is permitted under the GNU General Public License." and was added by Ted in 1993, at which point GPLv2 only was the default Linux license. Replace it with the usual GPLv2 only SPDX header. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220419063303.583106-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-10loop: remove loop.hChristoph Hellwig2-74/+54
Merge loop.h into loop.c as all the content is only used there. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220419063303.583106-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-10VFS: add FMODE_CAN_ODIRECT file flagNeilBrown1-2/+2
Currently various places test if direct IO is possible on a file by checking for the existence of the direct_IO address space operation. This is a poor choice, as the direct_IO operation may not be used - it is only used if the generic_file_*_iter functions are called for direct IO and some filesystems - particularly NFS - don't do this. Instead, introduce a new f_mode flag: FMODE_CAN_ODIRECT and change the various places to check this (avoiding pointer dereferences). do_dentry_open() will set this flag if ->direct_IO is present, so filesystems do not need to be changed. NFS *is* changed, to set the flag explicitly and discard the direct_IO entry in the address_space_operations for files. Other filesystems which currently use noop_direct_IO could usefully be changed to set this flag instead. Link: https://lkml.kernel.org/r/164859778128.29473.15189737957277399416.stgit@noble.brown Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de> Tested-by: David Howells <dhowells@redhat.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-08ataflop: use a statically allocated error countersWilly Tarreau1-4/+6
This is the last driver making use of fd_request->error_count, which is easy to get wrong as was shown in floppy.c. We don't need to keep it there, it can be moved to the atari_floppy_struct instead, so let's do this. Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Minh Yuan <yuanmingbuaa@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-05-08floppy: use a statically allocated error counterWilly Tarreau1-10/+8
Interrupt handler bad_flp_intr() may cause a UAF on the recently freed request just to increment the error count. There's no point keeping that one in the request anyway, and since the interrupt handler uses a static pointer to the error which cannot be kept in sync with the pending request, better make it use a static error counter that's reset for each new request. This reset now happens when entering redo_fd_request() for a new request via set_next_request(). One initial concern about a single error counter was that errors on one floppy drive could be reported on another one, but this problem is not real given that the driver uses a single drive at a time, as that PC-compatible controllers also have this limitation by using shared signals. As such the error count is always for the "current" drive. Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Tested-by: Denis Efremov <efremov@linux.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-05-04block: null_blk: Improve device creation with configfsDamien Le Moal1-1/+27
Currently, the directory name used to create a nullb device through sysfs is not used as the device name, potentially causing headaches for users if devices are already created through the modprobe operation withe the nr_device module parameter not set to 0. E.g. a user can do "mkdir /sys/kernel/config/nullb/nullb0" to create a nullb device even though /dev/nullb0 was already created by modprobe. In this case, the configfs nullb device will be named nullb1, causing confusion for the user. Simplify this by using the configfs directory name as the nullb device name, always, unless another nullb device is already using the same name. E.g. if modprobe created nullb0, then: $ mkdir /sys/kernel/config/nullb/nullb0 mkdir: cannot create directory '/sys/kernel/config/nullb/nullb0': File exists will be reported to the user. To implement this, the function null_find_dev_by_name() is added to check for the existence of a nullb device with the name used for a new configfs device directory. nullb_group_make_item() uses this new function to check if the directory name can be used as the disk name. Finally, null_add_dev() is modified to use the device config item name as the disk name for a new nullb device created using configfs. The naming of devices created though modprobe remains unchanged. Of note is that it is possible for a user to create through configfs a nullb device with the same name as an existing device. E.g. $ mkdir /sys/kernel/config/nullb/null will successfully create the nullb device named "null" but this block device will however not appear under /dev/ since /dev/null already exists. Suggested-by: Joseph Bacik <josef@toxicpanda.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220420005718.3780004-5-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-04block: null_blk: Cleanup messagesDamien Le Moal2-2/+10
Use the pr_fmt() macro to prefix all null_blk pr_xxx() messages with "null_blk:" to clarify which module is printing the messages. Also add a pr_info() message in null_add_dev() to print the name of a newly created disk. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220420005718.3780004-4-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-04block: null_blk: Cleanup device creation and deletionDamien Le Moal1-18/+30
Introduce the null_create_dev() and null_destroy_dev() helper functions to respectivel create nullb devices on modprobe and destroy them on rmmod. The null_destroy_dev() helper avoids duplicated code in the null_init() and null_exit() functions for deleting devices. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220420005718.3780004-3-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-04block: null_blk: Fix code style issuesDamien Le Moal1-4/+6
Fix message grammar and code style issues (brackets and indentation) in null_init(). Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220420005718.3780004-2-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-04xen-blkback: use bdev_discard_alignmentChristoph Hellwig1-3/+2
Use bdev_discard_alignment to calculate the correct discard alignment offset even for partitions instead of just looking at the queue limit. Also switch to use bdev_discard_granularity to get rid of the last direct queue reference in xen_blkbk_discard. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220418045314.360785-12-hch@lst.de [axboe: fold in 'q' removal as it's now unused] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-03rnbd-srv: use bdev_discard_alignmentChristoph Hellwig1-1/+1
Use bdev_discard_alignment to calculate the correct discard alignment offset even for partitions instead of just looking at the queue limit. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220418045314.360785-11-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-03loop: remove a spurious clear of discard_alignmentChristoph Hellwig1-1/+0
The loop driver never sets a discard_alignment, so it also doens't need to clear it to zero. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220418045314.360785-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-03virtio_blk: fix the discard_granularity and discard_alignment queue limitsChristoph Hellwig1-3/+4
The discard_alignment queue limit is named a bit misleading means the offset into the block device at which the discard granularity starts. On the other hand the discard_sector_alignment from the virtio 1.1 looks similar to what Linux uses as discard granularity (even if not very well described): "discard_sector_alignment can be used by OS when splitting a request based on alignment. " And at least qemu does set it to the discard granularity. So stop setting the discard_alignment and use the virtio discard_sector_alignment to set the discard granularity. Fixes: 1f23816b8eb8 ("virtio_blk: add discard and write zeroes support") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220418045314.360785-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-03null_blk: don't set the discard_alignment queue limitChristoph Hellwig1-1/+0
The discard_alignment queue limit is named a bit misleading means the offset into the block device at which the discard granularity starts. Setting it to the discard granularity as done by null_blk is mostly harmless but also useless. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220418045314.360785-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-03nbd: don't set the discard_alignment queue limitChristoph Hellwig1-3/+0
The discard_alignment queue limit is named a bit misleading means the offset into the block device at which the discard granularity starts. Setting it to the discard granularity as done by nbd is mostly harmless but also useless. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220418045314.360785-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-02blk-cgroup: replace bio_blkcg with bio_blkcg_cssChristoph Hellwig1-5/+7
All callers of bio_blkcg actually want the CSS, so replace it with an interface that does return the CSS. This now allows to move struct blkcg_gq to block/blk-cgroup.h instead of exposing it in a public header. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20220420042723.1010598-10-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-01aoe: Avoid flush_scheduled_work() usageTetsuo Handa5-5/+15
Flushing system-wide workqueues is dangerous and will be forbidden. Replace system_wq with local aoe_wq. Link: https://lkml.kernel.org/r/49925af7-78a8-a3dd-bce6-cfc02e1a9236@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/abb37616-eec9-2794-e21e-7c623085d987@I-love.SAKURA.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-30zram: add a huge_idle writeback modeBrian Geffon1-4/+6
Today it's only possible to write back as a page, idle, or huge. A user might want to writeback pages which are huge and idle first as these idle pages do not require decompression and make a good first pass for writeback. Idle writeback specifically has the advantage that a refault is unlikely given that the page has been swapped for some amount of time without being refaulted. Huge writeback has the advantage that you're guaranteed to get the maximum benefit from a single page writeback, that is, you're reclaiming one full page of memory. Pages which are compressed in zram being written back result in some benefit which is always less than a page size because of the fact that it was compressed. The primary use of this is for minimizing refaults in situations where the device has to be sensitive to storage endurance. On ChromeOS we have devices with slow eMMC and repeated writes and refaults can negatively affect performance and endurance. Link: https://lkml.kernel.org/r/20220322215821.1196994-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-27floppy: disable FDRAWCMD by defaultWilly Tarreau2-11/+48
Minh Yuan reported a concurrency use-after-free issue in the floppy code between raw_cmd_ioctl and seek_interrupt. [ It turns out this has been around, and that others have reported the KASAN splats over the years, but Minh Yuan had a reproducer for it and so gets primary credit for reporting it for this fix - Linus ] The problem is, this driver tends to break very easily and nowadays, nobody is expected to use FDRAWCMD anyway since it was used to manipulate non-standard formats. The risk of breaking the driver is higher than the risk presented by this race, and accessing the device requires privileges anyway. Let's just add a config option to completely disable this ioctl and leave it disabled by default. Distros shouldn't use it, and only those running on antique hardware might need to enable it. Link: https://lore.kernel.org/all/000000000000b71cdd05d703f6bf@google.com/ Link: https://lore.kernel.org/lkml/CAKcFiNC=MfYVW-Jt9A3=FPJpTwCD2PL_ULNCpsCVE5s8ZeBQgQ@mail.gmail.com Link: https://lore.kernel.org/all/CAEAjamu1FRhz6StCe_55XY5s389ZP_xmCF69k987En+1z53=eg@mail.gmail.com Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> Reported-by: syzbot+8e8958586909d62b6840@syzkaller.appspotmail.com Reported-by: cruise k <cruise4k@gmail.com> Reported-by: Kyungtae Kim <kt0755@gmail.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Tested-by: Denis Efremov <efremov@linux.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-31 18:19:51 +0300