summaryrefslogtreecommitdiff
path: root/drivers/bluetooth/btbcm.h
AgeCommit message (Collapse)AuthorFilesLines
2022-07-22Bluetooth: hci_bcm: Add support for FW loading in autobaud modeHakan Jansson1-4/+4
Use the presence of a DT property, "brcm,requires-autobaud-mode", to enable startup in autobaud mode. If the property is present, the device is started in autobaud mode by asserting RTS (BT_UART_CTS_N) prior to powering on the device. Also prevent the use of unsupported commands for devices started in autobaud mode. Only a limited subset of HCI commands are supported in autobaud mode. Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading. Autobaud mode can also be required on some boards where the controller device is using a non-standard baud rate in normal mode when first powered on. Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-22Bluetooth: btbcm: Make btbcm_setup_patchram use btbcm_finalizeHans de Goede1-2/+2
On UART attached devices we do: 1. btbcm_initialize() 2. Setup UART baudrate, etc. 3. btbcm_finalize() After our previous changes we can now also use btbcm_finalize() from the btbcm_setup_patchram() function used on USB devices without any functional changes. This completes unifying the USB and UART paths as much as possible. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-22Bluetooth: btbcm: Fold Patch loading + applying into btbcm_initialize()Hans de Goede1-4/+2
Instead of having btbcm_initialize() fill a passed in fw_name buffer and then have its callers use that to request the firmware + load it into the HCI, make btbcm_initialize() do this itself the first time it is called (its get called a second time to reset the HCI after the firmware has been loaded). This removes some code duplication and makes it easier for further patches in this series to try more then 1 firmware filename. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-04Bluetooth: btbcm: Add missing static inline in headerAbhishek Pandit-Subedi1-2/+2
This fixes a double definition error when CONFIG_BT_BCM is not set. Fixes: 528379902337 ("Bluetooth: btbcm: Support pcm configuration") Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-11-27Bluetooth: btbcm: Support pcm configurationAbhishek Pandit-Subedi1-0/+16
Add BCM vendor specific command to configure PCM parameters. The new vendor opcode allows us to set the sco routing, the pcm interface rate, and a few other pcm specific options (frame sync, sync mode, and clock mode). See broadcom-bluetooth.txt in Documentation for more information about valid values for those settings. Here is an example trace where this opcode was used to configure a BCM4354: < HCI Command: Vendor (0x3f|0x001c) plen 5 01 02 00 01 01 > HCI Event: Command Complete (0x0e) plen 4 Vendor (0x3f|0x001c) ncmd 1 Status: Success (0x00) We can read back the values as well with ocf 0x001d to confirm the values that were set: $ hcitool cmd 0x3f 0x001d < HCI Command: ogf 0x3f, ocf 0x001d, plen 0 > HCI Event: 0x0e plen 9 01 1D FC 00 01 02 00 01 01 Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner1-16/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-18Bluetooth: btbcm: Allow using btbcm_initialize() for reinitHans de Goede1-2/+3
btbcm_finalize() does a re-init of the controller, which is almost the same as the initial init. Modify btbcm_initialize() so that it can be used for this re-init and modify btbcm_finalize() to use it. As an added bonus this also makes the dev_info from btbcm_finalize() use the proper hw_name instead of always printing "BCM". Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-01-10Bluetooth: btbcm: Fix sleep mode struct orderingLukas Wunner1-1/+1
According to the documentation for Laird SD40 radio modules (which use the BCM4329 chipset), the order of the Enable_BREAK_To_Host and Pulsed_HOST_WAKE parameters in the sleep mode struct is reversed vis-à-vis our struct declaration. See page 46 of this PDF: http://cdn.lairdtech.com/home/brandworld/files/Application%20Note%20-%2040%20Series%20Bluetooth.pdf The documentation is dated Oct 2015, so fairly recent, making it appear more likely that the documentation is correct and our code is wrong. Amend our code to be in congruence with the documentation. Cc: Sue White <sue.white@lairdtech.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-17Bluetooth: btbcm: Support the BCM4354 Bluetooth UART deviceIlya Faenson1-0/+31
Support the BCM4354 chip and introduce vendor specific command parameter definitions. Signed-off-by: Ilya Faenson <ifaenson@broadcom.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-10Bluetooth: hci_uart: Add bcm_set_baudrate()Frederic Danis1-0/+12
Add vendor specific command to change controller device speed. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06Bluetooth: btbcm: Add helper functions for UART setupFrederic Danis1-0/+14
Firmware loading may reset the controller UART speed and needs to set host UART speed back to init speed. UART drivers setup is split in 3 parts: - btbcm_initialize() resets the controller and returns the firmware name based on controller revision and sub_version. - btbtcm_patchram() (already existing and public), which takes the firmware name as parameter, requests the firmware and loads it to the controller. - btbcm_finalize() which resets the controller, reads local version and checks if the controller address is a default one or not. Remove firmware name retrieval for UART controllers from btbcm_setup_patchram(). Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06Bluetooth: btbcm: Move request/release_firmware()Frederic Danis1-2/+2
Move request/release_firmware() out of btbcm_patchram(). This allows a better error management, if request_firmware() returns an error then the controller will be used without firmware loading and 0 is returned. This will imply to change btbcm_patchram() to accept a firmware instead of firmware name. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30Bluetooth: btbcm: Export patchram download as separate functionMarcel Holtmann1-0/+6
This isolates the Broadcom patchram download procedure as separate function so that it can be easily used from USB and UART based drivers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07Bluetooth: btbcm: Add support for Broadcom controller setupMarcel Holtmann1-0/+13
To unify the controller setup of Broadcom devices between USB and UART transport, add the patchram download support into the Broadcom module. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07Bluetooth: btbcm: Introduce generic Broadcom Bluetooth supportMarcel Holtmann1-0/+41
The majority of Broadcom Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Broadcom specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>