summaryrefslogtreecommitdiff
path: root/drivers/bluetooth
AgeCommit message (Collapse)AuthorFilesLines
2023-10-23Bluetooth: btmtksdio: enable bluetooth wakeup in system suspendZhengping Jiang1-6/+38
The BTMTKSDIO_BT_WAKE_ENABLED flag is set for bluetooth interrupt during system suspend and increases wakeup count for bluetooth event. Signed-off-by: Zhengping Jiang <jiangzp@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-23Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BEGuan Wentao1-0/+2
Add PID/VID 0bda:b85b for Realtek RTL8852BE USB bluetooth part. The PID/VID was reported by the patch last year. [1] Some SBCs like rockpi 5B A8 module contains the device. And it`s founded in website. [2] [3] Here is the device tables in /sys/kernel/debug/usb/devices . T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b85b Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Link: https://lore.kernel.org/all/20220420052402.19049-1-tangmeng@uniontech.com/ [1] Link: https://forum.radxa.com/t/bluetooth-on-ubuntu/13051/4 [2] Link: https://ubuntuforums.org/showthread.php?t=2489527 [3] Cc: stable@vger.kernel.org Signed-off-by: Meng Tang <tangmeng@uniontech.com> Signed-off-by: Guan Wentao <guanwentao@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-23Bluetooth: hci_bcm4377: Mark bcm4378/bcm4387 as BROKEN_LE_CODEDJanne Grunau1-0/+5
bcm4378 and bcm4387 claim to support LE Coded PHY but fail to pair (reliably) with BLE devices if it is enabled. On bcm4378 pairing usually succeeds after 2-3 tries. On bcm4387 pairing appears to be completely broken. Cc: stable@vger.kernel.org # 6.4.y+ Link: https://discussion.fedoraproject.org/t/mx-master-3-bluetooth-mouse-doesnt-connect/87072/33 Link: https://github.com/AsahiLinux/linux/issues/177 Fixes: 288c90224eec ("Bluetooth: Enable all supported LE PHY by default") Signed-off-by: Janne Grunau <j@jannau.net> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-23Bluetooth: btusb: Add date->evt_skb is NULL checkyouwan Wang1-0/+3
fix crash because of null pointers [ 6104.969662] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 6104.969667] #PF: supervisor read access in kernel mode [ 6104.969668] #PF: error_code(0x0000) - not-present page [ 6104.969670] PGD 0 P4D 0 [ 6104.969673] Oops: 0000 [#1] SMP NOPTI [ 6104.969684] RIP: 0010:btusb_mtk_hci_wmt_sync+0x144/0x220 [btusb] [ 6104.969688] RSP: 0018:ffffb8d681533d48 EFLAGS: 00010246 [ 6104.969689] RAX: 0000000000000000 RBX: ffff8ad560bb2000 RCX: 0000000000000006 [ 6104.969691] RDX: 0000000000000000 RSI: ffffb8d681533d08 RDI: 0000000000000000 [ 6104.969692] RBP: ffffb8d681533d70 R08: 0000000000000001 R09: 0000000000000001 [ 6104.969694] R10: 0000000000000001 R11: 00000000fa83b2da R12: ffff8ad461d1d7c0 [ 6104.969695] R13: 0000000000000000 R14: ffff8ad459618c18 R15: ffffb8d681533d90 [ 6104.969697] FS: 00007f5a1cab9d40(0000) GS:ffff8ad578200000(0000) knlGS:00000 [ 6104.969699] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6104.969700] CR2: 00000000000000c8 CR3: 000000018620c001 CR4: 0000000000760ef0 [ 6104.969701] PKRU: 55555554 [ 6104.969702] Call Trace: [ 6104.969708] btusb_mtk_shutdown+0x44/0x80 [btusb] [ 6104.969732] hci_dev_do_close+0x470/0x5c0 [bluetooth] [ 6104.969748] hci_rfkill_set_block+0x56/0xa0 [bluetooth] [ 6104.969753] rfkill_set_block+0x92/0x160 [ 6104.969755] rfkill_fop_write+0x136/0x1e0 [ 6104.969759] __vfs_write+0x18/0x40 [ 6104.969761] vfs_write+0xdf/0x1c0 [ 6104.969763] ksys_write+0xb1/0xe0 [ 6104.969765] __x64_sys_write+0x1a/0x20 [ 6104.969769] do_syscall_64+0x51/0x180 [ 6104.969771] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 6104.969773] RIP: 0033:0x7f5a21f18fef [ 6104.9] RSP: 002b:00007ffeefe39010 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 6104.969780] RAX: ffffffffffffffda RBX: 000055c10a7560a0 RCX: 00007f5a21f18fef [ 6104.969781] RDX: 0000000000000008 RSI: 00007ffeefe39060 RDI: 0000000000000012 [ 6104.969782] RBP: 00007ffeefe39060 R08: 0000000000000000 R09: 0000000000000017 [ 6104.969784] R10: 00007ffeefe38d97 R11: 0000000000000293 R12: 0000000000000002 [ 6104.969785] R13: 00007ffeefe39220 R14: 00007ffeefe391a0 R15: 000055c10a72acf0 Signed-off-by: youwan Wang <wangyouwan@126.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-23Bluetooth: btusb: Add RTW8852BE device 13d3:3570 to device tablesMasum Reza1-0/+2
This device is used in TP-Link TX20E WiFi+Bluetooth adapter. Relevant information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3570 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Masum Reza <masumrezarock100@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-23Bluetooth: qca: add support for QCA2066Tim Jiang3-1/+83
This patch adds support for QCA2066 firmware patch and NVM downloading. as the RF performance of QCA2066 SOC chip from different foundries may vary. Therefore we use different NVM to configure them based on board ID. Changes in v2 - optimize the function qca_generate_hsp_nvm_name - remove redundant debug code for function qca_read_fw_board_id Signed-off-by: Tim Jiang <quic_tjiang@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-23Bluetooth: Add support for Intel Misty Peak - 8087:0038Vijay Satija1-0/+1
Devices from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=13 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0038 Rev= 0.00 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-23Bluetooth: Add support ITTIM PE50-M75CJingyang Wang1-0/+3
-Device(35f5:7922) from /sys/kernel/debug/usb/devices P: Vendor=35f5 ProdID=7922 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Jingyang Wang <wjy7717@126.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-14Bluetooth: btrtl: Ignore error return for hci_devcd_register()Max Chou1-7/+3
If CONFIG_DEV_COREDUMP was not set, it would return -EOPNOTSUPP for hci_devcd_register(). In this commit, ignore error return for hci_devcd_register(). Otherwise Bluetooth initialization will be failed. Fixes: 044014ce85a1 ("Bluetooth: btrtl: Add Realtek devcoredump support") Cc: stable@vger.kernel.org Reported-by: Kirill A. Shutemov <kirill@shutemov.name> Closes: https://lore.kernel.org/all/ZRyqIn0_qqEFBPdy@debian.me/T/ Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-11Bluetooth: vhci: Fix race when opening vhci deviceArkadiusz Bokowy1-0/+3
When the vhci device is opened in the two-step way, i.e.: open device then write a vendor packet with requested controller type, the device shall respond with a vendor packet which includes HCI index of created interface. When the virtual HCI is created, the host sends a reset request to the controller. This request is processed by the vhci_send_frame() function. However, this request is send by a different thread, so it might happen that this HCI request will be received before the vendor response is queued in the read queue. This results in the HCI vendor response and HCI reset request inversion in the read queue which leads to improper behavior of btvirt: > dmesg [1754256.640122] Bluetooth: MGMT ver 1.22 [1754263.023806] Bluetooth: MGMT ver 1.22 [1754265.043775] Bluetooth: hci1: Opcode 0x c03 failed: -110 In order to synchronize vhci two-step open/setup process with virtual HCI initialization, this patch adds internal lock when queuing data in the vhci_send_frame() function. Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-20Bluetooth: btusb: add shutdown function for QCA6174Rocky Liao1-0/+1
We should send hci reset command before bt turn off, which can reset bt firmware status. Signed-off-by: Rocky Liao <quic_rjliao@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-09-01Merge tag 'tty-6.6-rc1' of ↵Linus Torvalds1-11/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.6-rc1. Lots of cleanups in here this cycle, and some driver updates. Short summary is: - Jiri's continued work to make the tty code and apis be a bit more sane with regards to modern kernel coding style and types - cpm_uart driver updates - n_gsm updates and fixes - meson driver updates - sc16is7xx driver updates - 8250 driver updates for different hardware types - qcom-geni driver fixes - tegra serial driver change - stm32 driver updates - synclink_gt driver cleanups - tty structure size reduction All of these have been in linux-next this week with no reported issues. The last bit of cleanups from Jiri and the tty structure size reduction came in last week, a bit late but as they were just style changes and size reductions, I figured they should get into this merge cycle so that others can work on top of them with no merge conflicts" * tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) tty: shrink the size of struct tty_struct by 40 bytes tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw() tty: n_tty: extract ECHO_OP processing to a separate function tty: n_tty: unify counts to size_t tty: n_tty: use u8 for chars and flags tty: n_tty: simplify chars_in_buffer() tty: n_tty: remove unsigned char casts from character constants tty: n_tty: move newline handling to a separate function tty: n_tty: move canon handling to a separate function tty: n_tty: use MASK() for masking out size bits tty: n_tty: make n_tty_data::num_overrun unsigned tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun() tty: n_tty: use 'num' for writes' counts tty: n_tty: use output character directly tty: n_tty: make flow of n_tty_receive_buf_common() a bool Revert "tty: serial: meson: Add a earlycon for the T7 SoC" Documentation: devices.txt: Fix minors for ttyCPM* Documentation: devices.txt: Remove ttySIOC* Documentation: devices.txt: Remove ttyIOC* serial: 8250_bcm7271: improve bcm7271 8250 port ...
2023-08-24Bluetooth: btusb: Do not call kfree_skb() under spin_lock_irqsave()Jinjie Ruan1-1/+1
It is not allowed to call kfree_skb() from hardware interrupt context or with hardware interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile tested only. Fixes: baac6276c0a9 ("Bluetooth: btusb: handle mSBC audio over USB Endpoints") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-24Bluetooth: btusb: Fix quirks table namingBastien Nocera1-2/+2
The quirks table was named "blacklist_table" which isn't a good description for that table as devices detected using it weren't ignored by the driver. Rename the table to match what it actually does. Signed-off-by: Bastien Nocera <hadess@hadess.net> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-24Bluetooth: HCI: Introduce HCI_QUIRK_BROKEN_LE_CODEDLuiz Augusto von Dentz1-0/+6
This introduces HCI_QUIRK_BROKEN_LE_CODED which is used to indicate that LE Coded PHY shall not be used, it is then set for some Intel models that claim to support it but when used causes many problems. Cc: stable@vger.kernel.org # 6.4.y+ Link: https://github.com/bluez/bluez/issues/577 Link: https://github.com/bluez/bluez/issues/582 Link: https://lore.kernel.org/linux-bluetooth/CABBYNZKco-v7wkjHHexxQbgwwSz-S=GZ=dZKbRE1qxT1h4fFbQ@mail.gmail.com/T/# Fixes: 288c90224eec ("Bluetooth: Enable all supported LE PHY by default") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-24Bluetooth: btintel: Send new command for PPAGLokendra Singh2-13/+19
Added support for the new command opcode FE0B (HCI Intel PPAG Enable). btmon log: < HCI Command: Intel PPAG Enable (0x3f|0x020b) plen 4 Enable: 0x00000002 > HCI Event: Command Complete (0x0e) plen 4 Intel PPAG Enable (0x3f|0x020b) ncmd 1 Status: Success (0x00) Signed-off-by: Seema Sreemantha <seema.sreemantha@intel.com> Signed-off-by: Lokendra Singh <lokendra.singh@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-24Bluetooth: qca: add support for WCN7850Neil Armstrong3-1/+41
Add support for the WCN7850 Bluetooth chipset. Tested on the SM8550 QRD platform. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-24Bluetooth: qca: use switch case for soc type behaviorNeil Armstrong3-120/+236
Use switch/case to handle soc type specific behaviour, the permit dropping the qca_is_xxx() inline functions and make the code clearer and easier to update for new SoCs. Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-24Bluetooth: btnxpuart: Improve inband Independent Reset handlingNeeraj Sanjay Kale1-76/+96
This improves the inband IR command handling for NXP BT chipsets. When the IR vendor command is received, the driver injects a HW error event, which causes a reset sequence in hci_error_reset(). The vendor IR command is sent to the controller while hci dev is been closed, and FW is re-downloaded when nxp_setup() is called during hci_dev_do_open(). The HCI_SETUP flag is set in nxp_hw_err() to make sure that nxp_setup() is been called during hci_dev_do_open(). This also makes the nxp_setup() and power save functions more generic. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-24Bluetooth: btnxpuart: Add support for IW624 chipsetNeeraj Sanjay Kale1-7/+30
This adds support for NXP IW624 chipset in btnxpuart driver by adding FW name and bootloader signature. Based on the loader version bits 7:6 of the bootloader signature, the driver can choose between selecting secure and non-secure FW files. For cmd5 payload during FW download, this chip has addresses of few registers offset by 1, so added boot_reg_offset to handle the chip specific offset. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-24Bluetooth: btnxpuart: Remove check for CTS low after FW downloadNeeraj Sanjay Kale1-6/+1
This removes the unnecessary check for CTS low after FW download. After FW download is complete, the CTS line is already seen low. It becomes high after 2 msec, and low again after FW initialization is complete. This makes the current check for CTS low redundant. This removes the wait for CTS low section and increase delay to 1200msec instead, which is sufficiant for all NXP chipsets to initialize FW. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11tty: ldops: unify to u8Jiri Slaby (SUSE)1-3/+3
Some hooks in struct tty_ldisc_ops still reference buffers by 'unsigned char'. Unify to 'u8' as the rest of the tty layer does. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230810091510.13006-32-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11tty: use u8 for flagsJiri Slaby (SUSE)1-1/+1
This makes all those 'char's an explicit 'u8'. This is part of the continuing unification of chars and flags to be consistent u8. This approaches tty_port_default_receive_buf(). Note that we do not change signedness as we compile with -funsigned-char. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Chris Brannon <chris@the-brannons.com> Cc: Kirk Reiser <kirk@reisers.ca> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Max Staudt <max@enpas.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Jeremy Kerr <jk@codeconstruct.com.au> Cc: Matt Johnston <matt@codeconstruct.com.au> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230810091510.13006-18-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11tty: make tty_ldisc_ops::*buf*() hooks operate on size_tJiri Slaby (SUSE)1-1/+1
Count passed to tty_ldisc_ops::receive_buf*(), ::lookahead_buf(), and returned from ::receive_buf2() is expected to be size_t. So set it to size_t to unify with the rest of the code. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Chris Brannon <chris@the-brannons.com> Cc: Kirk Reiser <kirk@reisers.ca> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Max Staudt <max@enpas.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Jeremy Kerr <jk@codeconstruct.com.au> Cc: Matt Johnston <matt@codeconstruct.com.au> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230810091510.13006-16-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11tty: remove dummy tty_ldisc_ops::poll() implementationsJiri Slaby (SUSE)1-7/+0
tty_ldisc_ops::poll() is optional and needs not be provided. It is equal to returning 0. So remove all those from the code. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230810091510.13006-4-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852CMax Chou1-25/+45
In this commit, prefer to load FW v2 if available. Fallback to FW v1 otherwise. This behavior is only for RTL8852C. Fixes: 9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support") Cc: stable@vger.kernel.org Suggested-by: Juerg Haefliger <juerg.haefliger@canonical.com> Tested-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btusb: Move btusb_recv_event_intel to btintelLuiz Augusto von Dentz3-74/+76
btusb_recv_event_intel is specific to Intel controllers therefore it shall be placed inside btintel.c so btusb don't have a mix of vendor specific code with the generic parts. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btqca: Add WCN3988 supportLuca Weiss3-4/+33
Add support for the Bluetooth chip codenamed APACHE which is part of WCN3988. The firmware for this chip has a slightly different naming scheme compared to most others. For ROM Version 0x0200 we need to use apbtfw10.tlv + apnv10.bin and for ROM version 0x201 apbtfw11.tlv + apnv11.bin Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btnxpuart: Add support for AW693 chipsetNeeraj Sanjay Kale1-8/+31
This adds support for NXP AW693 chipset in btnxpuart driver by adding FW name and bootloader signature. Based on the loader version bits 7:6 of the bootloader signature, the driver can choose between selecting secure and non-secure FW files. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: nokia: fix value check in nokia_bluetooth_serdev_probe()Yuanjun Gong1-1/+5
in nokia_bluetooth_serdev_probe(), check the return value of clk_prepare_enable() and return the error code if clk_prepare_enable() returns an unexpected value. Fixes: 7bb318680e86 ("Bluetooth: add nokia driver") Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11bluetooth: Explicitly include correct DT includesRob Herring3-3/+2
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btbcm: add default address for BCM43430A1Mans Rullgard1-0/+5
The BCM43430A1 has a default MAC address of AA:AA:AA:AA:AA:AA. Although, unlike some other entries, this does not include the chip name, it is clearly not a real address. This was found in AzureWave AW-NB197SM and AW-NM372SM modules. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btmtk: Fix kernel crash when processing coredumpChris Lu2-6/+7
There may be a potential kernel crash risk if 'skb->len - MTK_COREDUMP_END_LEN' value is less than 0 when doing memcmp in btmtk_process_coredump(). Check the value is valid before doing memcmp. [215.021695] Unable to handle kernel paging request at virtual address ffffff939fffd3c5 [215.021781] Mem abort info: [215.021805] ESR = 0x96000005 [215.021833] EC = 0x25: DABT (current EL), IL = 32 bits [215.021861] SET = 0, FnV = 0 [215.021875] EA = 0, S1PTW = 0 [215.021886] Data abort info: [215.021899] ISV = 0, ISS = 0x00000005 [215.021912] CM = 0, WnR = 0 [215.021929] swapper pgtable: 4k pages, 39-bit VAs, pgdp=00000000410de000 [215.021943] [ffffff939fffd3c5] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [215.021979] Internal error: Oops: 96000005 [#1] PREEMPT SMP [215.022496] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.186#3 (HASH:ad23 4) [215.022511] Hardware name: MediaTek Tomato board (DT) [215.022530] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) [215.022556] pc : __pi_memcmp+0xd0/0x1b8 [215.022579] lr : btmtk_process_coredump+0xb0/0x5f8 [btmtk] [215.022593] sp : ffffffc010003d40 [215.022607] x29: ffffffc010003d40 x28: 0000000000000006 [215.022633] x27: ffffffda696350c0 x26: 0000000000000002 [215.022659] x25: 00000000000003ff x24: ffffff9360cca804 [215.022685] x23: 0000000000000000 x22: ffffff9365638500 [215.022710] x21: ffffff9365638700 x20: 0000000000000000 [215.022736] x19: ffffff936002e000 x18: 0000000000000000 [215.022761] x17: 0000000000000180 x16: ffffffda6881b8b4 [215.022787] x15: 0000000000000001 x14: 0000000000002d00 [215.022812] x13: 0000000000060000 x12: 0000000000000181 [215.022837] x11: 0000000000000006 x10: fffffffffffffffd [215.022862] x9 : 0000000000000006 x8 : 0000000000000003 [215.022887] x7 : 0000000000000000 x6 : 0000000000000000 [215.022913] x5 : ffffff93656387b8 x4 : 0000000000000000 [215.022938] x3 : ffffffc010003c18 x2 : 0000000000000006 [215.022963] x1 : ffffffda09d4124a x0 : ffffff939fffd3c5 [215.022989] Call trace: [215.023012] __pi_memcmp+0xd0/0x1b8 [215.023053] btusb_recv_acl_mtk+0x64/0x90 [btusb (HASH:dc6b 5)] [215.023087] btusb_recv_bulk+0x118/0x170 [btusb (HASH:dc6b 5)] [215.023121] btusb_bulk_complete+0x8c/0x148 [btusb (HASH:dc6b 5)] [215.023144] __usb_hcd_giveback_urb+0xbc/0x148 [215.023164] usb_giveback_urb_bh+0xb4/0x190 [215.023184] tasklet_action_common+0x98/0x1a0 [215.023201] tasklet_action+0x2c/0x38 [215.023220] __do_softirq+0xe0/0x38c [215.023241] invoke_softirq+0x34/0x6c [215.023258] irq_exit+0x6c/0xb0 [215.023279] __handle_domain_irq+0x98/0xd4 [215.023296] gic_handle_irq+0x5c/0x11c [215.023313] el1_irq+0xd0/0x180 [215.023332] cpuidle_enter_state+0xac/0x338 [215.023349] cpuidle_enter+0x40/0x70 [215.023366] do_idle+0x150/0x278 [215.023384] cpu_startup_entry+0x2c/0x58 [215.023401] rest_init+0xdc/0xec [215.023419] arch_call_rest_init+0x18/0x24 [215.023435] start_kernel+0x334/0x400 [215.023460] Code: 91002129 eb09010a 9a89810b cb0b0042 (38401403) [215.023478] ---[ end trace 28668fd20c7a90cd ] Fixes: 2822cd0173ad ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support") Signed-off-by: Chris Lu <chris.lu@mediatek.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btusb: Add support for another MediaTek 7922 VID/PIDRoger Gammans1-0/+3
This one is found on the Dell Inspiron 2-in-1 7435 The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f1 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Roger Gammans <rgammans@gammascience.co.uk> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: hci_ldisc: check HCI_UART_PROTO_READY flag in HCIUARTGETPROTOLee, Chun-Yi1-1/+2
This patch adds code to check HCI_UART_PROTO_READY flag before accessing hci_uart->proto. It fixes the race condition in hci_uart_tty_ioctl() between HCIUARTSETPROTO and HCIUARTGETPROTO. This issue bug found by Yu Hao and Weiteng Chen: BUG: general protection fault in hci_uart_tty_ioctl [1] The information of C reproducer can also reference the link [2] Reported-by: Yu Hao <yhao016@ucr.edu> Closes: https://lore.kernel.org/all/CA+UBctC3p49aTgzbVgkSZ2+TQcqq4fPDO7yZitFT5uBPDeCO2g@mail.gmail.com/ [1] Reported-by: Weiteng Chen <wchen130@ucr.edu> Closes: https://lore.kernel.org/lkml/CA+UBctDPEvHdkHMwD340=n02rh+jNRJNNQ5LBZNA+Wm4Keh2ow@mail.gmail.com/T/ [2] Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btusb: Add new VID/PID 04ca/3804 for MT7922Chris Lu1-0/+3
Add VID 04ca & PID 3804 for MediaTek MT7922 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3804 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btusb: Add new VID/PID 0489/e102 for MT7922Chris Lu1-0/+3
Add VID 0489 & PID e102 for MediaTek MT7922 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e102 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: Add support for Gale Peak (8087:0036)Kiran K1-0/+1
Devices from /sys/kernel/debug/usb/devices: T: Bus=09 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0036 Rev= 0.00 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btusb: Add a new VID/PID 0489/e0f6 for MT7922Chris Lu1-0/+3
Add VID/PID 0489/e0f6 for MediaTek MT7922 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f6 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btusb: Add device 0489:e0f5 as MT7922 deviceValentin David1-0/+3
Asus ROG Ally gaming computer has a MediaTek MT7922 chip that uses USB id 0489:e0f5 and needs to be added to the table. Without this, the device is not usable and gives the following error: Bluetooth: hci0: Opcode 0x c03 failed: -110 Output from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f5 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Valentin David <valentin.david@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btusb: mediatek: add MediaTek devcoredump supportJing Cai3-0/+154
This patch implement function .coredump() and dmp_hdr() in btusb driver for MediaTek controller. FW core dump was triggered by FW specific event to show something unexpected happened in the controller. The driver would be responsible for collecting and uploading the device core dump pieces in hci driver using core dump API. Once we finished the whole process, the driver would reset the controller to recover the kind of fatal error. Co-developed-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Chris Lu <chris.lu@mediatek.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Jing Cai <jing.cai@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btmtk: introduce btmtk reset workJing Cai3-71/+97
Introduce btmtk_reset_work which can be called whenever the firmware abort, HCI command timeout, other fatal error happen. Co-developed-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Chris Lu <chris.lu@mediatek.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Jing Cai <jing.cai@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btusb: mediatek: readx_poll_timeout replaces open codingSean Wang1-15/+15
Use readx_poll_timeout instead of open coding to poll the hardware reset status until it is done. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btmtk: add printing firmware informationChris Lu1-0/+5
Add printing firmware information part when driver loading firmware that user can get mediatek bluetooth information. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btintel: Add support for Gale PeakKiran K1-0/+3
Add hardware variant(0x1c) for Gale Peak core (CNVi). Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: msft: Extended monitor tracking by address filterHilda Wu1-0/+4
Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btusb: Add support Mediatek MT7925Peter Tsao3-20/+64
This patch is added support Mediatek MT7925. 1. The firmware location of MT7925 will set to /lib/firmware/mediatek/mt7925 2. Add Mediatek private data in hdev to record the device for handle MT7925 flow. 3. Use the recoreded dev_id to condition chip reset flow. The information in /sys/kernel/debug/usb/devices about the MT7925U Bluetooth device is listed as the below T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 27 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=7925 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 5 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8f(I) Atr=03(Int.) MxPS= 2 Ivl=125us I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us I:* If#= 3 Alt= 0 #EPs= 9 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 2 Ivl=125us Signed-off-by: Peter Tsao <peter.tsao@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btintel: Add support to reset bluetooth via ACPI DSMKiran K3-0/+139
New Intel platforms supports reset of Bluetooth device via ACPI DSM methods. The legacy reset mechanism via GPIO will be deprecated in future. This patch checks the platform support for reset methods and if supported uses the same instead of legacy GPIO toggling method. ACPI firmware supports two types of reset method based on NIC card. (Discrete or Integrated). 1. VSEC Type - Vendor Specific Extended Capability. Here BT_EN and BT_IF_SELECT lines are driven by a register in PCH cluster. This interface is supported on discrete BT solution. 2. WDISABLE2 - In this soluton, W_DISABLE2 pin in M.2 is connected to physical GPIO from PCH. The DSM interface shall toggle this to recover from error. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: hci_qca: Add qcom devcoredump supportSai Teja Aluvala1-50/+85
Intercept debug exception events from QCA controller and put them into a devcoredump using hci devcoredump APIs of hci_core Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com> V2 -> V3: --------- changed hci_coredump_qca function V1 -> V2: --------- Updated to work with the updated HCI devcoredump API. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: hci_qca: Add qcom devcoredump sysfs supportSai Teja Aluvala1-0/+15
This patch implements the hci_qca driver side .coredump() callback to trigger a devcoredump via sysfs. Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com> v2 -> V3: -------- Updated commit text v1 -> V2: -------- Updated to work with the updated HCI devcoredump API. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-25 18:23:26 +0300