summaryrefslogtreecommitdiff
path: root/drivers/bus
AgeCommit message (Collapse)AuthorFilesLines
2023-09-13bus: ti-sysc: Fix SYSC_QUIRK_SWSUP_SIDLE_ACT handling for uart wake-upTony Lindgren1-5/+17
The uarts should be tagged with SYSC_QUIRK_SWSUP_SIDLE instead of SYSC_QUIRK_SWSUP_SIDLE_ACT. The difference is that SYSC_QUIRK_SWSUP_SIDLE is used to force idle target modules rather than block idle during usage. The SYSC_QUIRK_SWSUP_SIDLE_ACT should disable autoidle and wake-up when a target module is active, and configure autoidle and wake-up when a target module is inactive. We are missing configuring the target module on sysc_disable_module(), and missing toggling of the wake-up bit. Let's fix the issue to allow uart wake-up to work. Fixes: fb685f1c190e ("bus: ti-sysc: Handle swsup idle mode quirks") Tested-by: Dhruva Gole <d-gole@ti.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-11bus: ti-sysc: Fix missing AM35xx SoC matchingAdam Ford1-2/+4
Commit feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling") created a list of SoC types searching for strings based on names and wildcards which associates the SoC to different families. The OMAP34xx and OMAP35xx are treated as SOC_3430 while OMAP36xx and OMAP37xx are treated as SOC_3630, but the AM35xx isn't listed. The AM35xx is mostly an OMAP3430, and a later commit a12315d6d270 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific") looks for the SOC type and behaves in a certain way if it's SOC_3430. This caused a regression on the AM3517 causing it to return two errors: ti-sysc: probe of 48318000.target-module failed with error -16 ti-sysc: probe of 49032000.target-module failed with error -16 Fix this by treating the creating SOC_AM35 and inserting it between the SOC_3430 and SOC_3630. If it is treaed the same way as the SOC_3430 when checking the status of sysc_check_active_timer, the error conditions will disappear. Fixes: a12315d6d270 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific") Fixes: feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling") Signed-off-by: Adam Ford <aford173@gmail.com> Message-ID: <20230906233442.270835-1-aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-11bus: ti-sysc: Use fsleep() instead of usleep_range() in sysc_reset()Julien Panis1-2/+1
The am335x-evm started producing boot errors because of subtle timing changes: Unhandled fault: external abort on non-linefetch (0x1008) at 0xf03c1010 ... sysc_reset from sysc_probe+0xf60/0x1514 sysc_probe from platform_probe+0x5c/0xbc ... The fix consists in using the appropriate sleep function in sysc reset. For flexible sleeping, fsleep is recommended. Here, sysc delay parameter can take any value in [0 - 255] us range. As a result, fsleep() should be used, calling udelay() for a sysc delay lower than 10 us. Signed-off-by: Julien Panis <jpanis@baylibre.com> Fixes: e709ed70d122 ("bus: ti-sysc: Fix missing reset delay handling") Message-ID: <20230821-fix-ti-sysc-reset-v1-1-5a0a5d8fae55@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-01Merge tag 'char-misc-6.6-rc1' of ↵Linus Torvalds5-15/+80
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem changes for 6.6-rc1. Stuff all over the place here, lots of driver updates and changes and new additions. Short summary is: - new IIO drivers and updates - Interconnect driver updates - fpga driver updates and additions - fsi driver updates - mei driver updates - coresight driver updates - nvmem driver updates - counter driver updates - lots of smaller misc and char driver updates and additions All of these have been in linux-next for a long time with no reported problems" * tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits) nvmem: core: Notify when a new layout is registered nvmem: core: Do not open-code existing functions nvmem: core: Return NULL when no nvmem layout is found nvmem: core: Create all cells before adding the nvmem device nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper nvmem: sec-qfprom: Add Qualcomm secure QFPROM support dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom dt-bindings: nvmem: Add compatible for QCM2290 nvmem: Kconfig: Fix typo "drive" -> "driver" nvmem: Explicitly include correct DT includes nvmem: add new NXP QorIQ eFuse driver dt-bindings: nvmem: Add t1023-sfp efuse support dt-bindings: nvmem: qfprom: Add compatible for MSM8226 nvmem: uniphier: Use devm_platform_get_and_ioremap_resource() nvmem: qfprom: do some cleanup nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource() nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource() nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource() nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource() nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource() ...
2023-08-31Merge tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds7-6/+6
Pull ARM SoC cleanups from Arnd Bergmann: "These are all minor cleanups for platform specific code in arch/arm/ and some of the associated drivers. The majority of these are work done by Rob Herring to improve the way devicetreee header files are handled" * tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits) ARM: davinci: Drop unused includes ARM: s5pv210: Explicitly include correct DT includes ARM: dove: Drop unused includes ARM: mvebu: Explicitly include correct DT includes Documentation/process: maintainer-soc: document dtbs_check requirement for Samsung MAINTAINER: samsung: document dtbs_check requirement for Samsung Documentation/process: maintainer-soc: add clean platforms profile MAINTAINERS: soc: reference maintainer profile ARM: nspire: Remove unused header file mmio.h ARM: nspire: Use syscon-reboot to handle restart soc: fsl: Explicitly include correct DT includes soc: xilinx: Explicitly include correct DT includes soc: sunxi: Explicitly include correct DT includes soc: rockchip: Explicitly include correct DT includes soc: mediatek: Explicitly include correct DT includes soc: aspeed: Explicitly include correct DT includes firmware: Explicitly include correct DT includes bus: Explicitly include correct DT includes ARM: spear: Explicitly include correct DT includes ARM: mvebu: Explicitly include correct DT includes ...
2023-08-31Merge tag 'soc-drivers-6.6' of ↵Linus Torvalds8-100/+33
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "The main change this time was the introduction of the drivers/genpd subsystem that gets split out from drivers/soc to keep common functionality together. The SCMI driver subsystem gets an update to version 3.2 of the specification. There are also updates to memory, reset and other firmware drivers. On the soc driver side, the updates are mostly cleanups across a number of Arm platforms. On driver for loongarch adds power management for DT based systems, another driver is for HiSilicon's Arm server chips with their HCCS system health interface. The remaining updates for the most part add support for additional hardware in existing drivers or contain minor cleanups. Most of these are for the Qualcomm Snapdragon platform" * tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits) bus: fsl-mc: Use common ranges functions soc: kunpeng_hccs: fix some sparse warnings about incorrect type soc: loongson2_pm: add power management support soc: dt-bindings: add loongson-2 pm soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1 genpd: rockchip: Add PD_VO entry for rv1126 bus: ti-sysc: Fix cast to enum warning soc: kunpeng_hccs: add MAILBOX dependency MAINTAINERS: remove OXNAS entry dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated irqchip: irq-versatile-fpga: remove obsolete oxnas compatible soc: qcom: aoss: Tidy up qmp_send() callers soc: qcom: aoss: Format string in qmp_send() soc: qcom: aoss: Move length requirements from caller soc: kunpeng_hccs: fix size_t format string soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX dt-bindings: firmware: qcom: scm: Updating VMID list firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP firmware: imx: scu-irq: add imx_scu_irq_get_status ...
2023-08-29bus: fsl-mc: Use common ranges functionsRob Herring1-77/+13
Since commit 3d5089c4263d ("of/address: Add support for 3 address cell bus"), the DT address functions can handle translating buses with 3 address cells. Replace the custom code with the for_each_of_range() iterator. The original code had fallbacks to get "#address-cells"/"#size-cells" from the bus parent node if they are missing. This is non-standard behavior, and AFAICT the upstream .dts files never relied on that. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230823190958.2717267-1-robh@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-22Merge tag 'omap-for-v6.6/ti-sysc-signed' of ↵Arnd Bergmann3-13/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/drivers Driver changes for omaps for v6.6 Driver changes for ti-sysc interconnect target module driver and for l3 interconnect error handler. The ti-sysc driver changes just enable using it for 64-bit systems like TI am62 that have wake-up capability for the wkup domain devices. The l3 error handling improves the code to show the error source if an unrecoverable timeout error occurs. * tag 'omap-for-v6.6/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix cast to enum warning bus: ti-sysc: Fix a build warning with W=1 for sysconfig bus: ti-sysc: Configure uart quirks for k3 SoC bus: ti-sysc: Build driver for TI K3 SoCs bus: ti-sysc: Fix build warning for 64-bit build bus: omap_l3_smx: identify timeout cause before rebooting Link: https://lore.kernel.org/r/pull-1692158857-597450@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-15bus: ti-sysc: Fix cast to enum warningTony Lindgren1-1/+1
Fix warning for "cast to smaller integer type 'enum sysc_soc' from 'const void *'". Cc: Nishanth Menon <nm@ti.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308150723.ziuGCdM3-lkp@intel.com/ Fixes: e1e1e9bb9d94 ("bus: ti-sysc: Fix build warning for 64-bit build") Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-08-14Merge tag 'imx-drivers-6.6' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers i.MX drivers update for 6.6: - A series from NXP i.MX developers (Peng Fan, etc.) to update imx-scu and imx-scu-irq firmware drivers. - Add dedicated lockdep class for nested genpd locks to fix a lockdep warning in imx93-blk-ctrl driver. - A change from Rob to explicitly include correct DT headers for i.MX SoC drivers. - Use devm_platform_ioremap_resource() in imx-weim bus driver. * tag 'imx-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP firmware: imx: scu-irq: add imx_scu_irq_get_status firmware: imx: scu-irq: fix RCU complaint after M4 partition reset firmware: imx: scu: use EOPNOTSUPP firmware: imx: scu: use soc name for soc_id firmware: imx: scu: increase RPC timeout firmware: imx: scu: change init level to subsys_initcall_sync soc: imx: Explicitly include correct DT includes bus: imx-weim: use devm_platform_ioremap_resource soc: imx: imx93-blk-ctrl: Add dedicated lockdep class for nested genpd locks Link: https://lore.kernel.org/r/20230813133354.847010-1-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12Merge tag 'sunxi-drivers-for-6.6-1' of ↵Arnd Bergmann1-3/+1
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/drivers - simplify code in sunxi-rsb - fix includes in sunxi_sram * tag 'sunxi-drivers-for-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: soc: sunxi: Explicitly include correct DT includes bus: sunxi-rsb: Convert to devm_platform_ioremap_resource() Link: https://lore.kernel.org/r/20230806180650.GA127142@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12Merge tag 'vexpress-updates-6.6' of ↵Arnd Bergmann1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers Arm Vexpress updates for v6.6 Couple of minor updates: Code simplification in the vexpress config bus driver with the use of devm_platform_ioremap_resource() and simplification of Arm Vexpress platform and related drivers entries in MAINTAINERS file. * tag 'vexpress-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: MAINTAINERS: Simplify entries for Arm Vexpress platform and related drivers bus: vexpress-config: Convert to devm_platform_ioremap_resource() Link: https://lore.kernel.org/r/20230804123214.3258032-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12bus: Explicitly include correct DT includesRob Herring7-6/+6
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230803-dt-header-cleanups-for-soc-v2-16-d8de2cc88bff@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-11bus: mhi: host: pci_generic: add support for Telit FE990 modemDaniele Palmas1-0/+3
Add support for Telit FE990 that has the same configuration as FN990: $ lspci -vv 04:00.0 Unassigned class [ff00]: Qualcomm Device 0308 Subsystem: Device 1c5d:2015 Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/20230804094039.365102-1-dnlplm@gmail.com [mani: minor update to commit subject and adjusted comment] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-08-11bus: mhi: host: remove unused-but-set parameterArnd Bergmann1-1/+0
Clang warns about a parameter that is decremented but never evaluated here: bus/mhi/host/main.c:803:13: error: parameter 'event_quota' set but not used [-Werror,-Wunused-but-set-parameter] u32 event_quota) Remove the access to the variable to avoid that warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/r/20230811134547.3231160-1-arnd@kernel.org [mani: minor spelling fix to commit message] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-08-10bus: ti-sysc: Fix a build warning with W=1 for sysconfigTony Lindgren1-0/+1
Dhruva reported a build warning with W=1 for "Function parameter or member 'sysconfig' not described in 'sysc'". Let's document sysconfig to fix this. Reported-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-08-10bus: ti-sysc: Configure uart quirks for k3 SoCTony Lindgren1-0/+2
Enable the uart quirks similar to the earlier SoCs. Let's assume we are likely going to need a k3 specific quirk mask separate from the earlier SoCs, so let's not start changing the revision register mask at this point. Note that SYSC_QUIRK_LEGACY_IDLE will be needed until we can remove the need for pm_runtime_irq_safe() from 8250_omap driver. Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-08-10bus: ti-sysc: Build driver for TI K3 SoCsTony Lindgren1-1/+2
Allow building ti-sysc also for K3 SoCs. This allows configuring the wkup domain devices for SYSCONFIG register wake-up events in a generic way. As this is an interconnect level driver, default to built-in on K3 SoCs to probe the devices connected to the wkup domain like gpio, uart and timers. Reviewed-by: Dhruva Gole <d-gole@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-08-10bus: ti-sysc: Fix build warning for 64-bit buildTony Lindgren1-1/+1
Fix "warning: cast from pointer to integer of different size" on 64-bit builds. Note that this is a cosmetic fix at this point as the driver is not yet used for 64-bit systems. Fixes: feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling") Reviewed-by: Dhruva Gole <d-gole@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-08-09bus: omap_l3_smx: identify timeout cause before rebootingSicelo A. Mhlongo1-11/+10
Identify and print the error source before rebooting the board due to an l3 timeout error. This is helpful when debugging, e.g. via serial. Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Message-ID: <20230801192240.1063764-1-absicsz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-08-08bus: mhi: host: pci_generic: Add support for Quectel RM520N-GL Lenovo variantDuke Xin (辛安文)1-0/+3
Quectel's RM520N-GL Lenovo variant is same as that of the existing RM520N-GL modem and uses the same config. But this one is designed for Lenovo laptop usecase, hence Quectel got a new PID. Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/20230807030454.37255-1-duke_xinanwen@163.com [mani: tweaked subject and commit message a bit] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-08-04bus: mhi: host: allow MHI client drivers to provide the firmware via a pointerKalle Valo1-9/+25
Currently MHI loads the firmware image from the path provided by client devices. ath11k needs to support firmware image embedded along with meta data (named as firmware-2.bin). So allow the client driver to request the firmware file from user space on it's own and provide the firmware image data and size to MHI via a pointer struct mhi_controller::fw_data. This is an optional feature, if fw_data is NULL MHI load the firmware using the name from struct mhi_controller::fw_image string as before. Tested with ath11k and WCN6855 hw2.0. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/r/20230727100430.3603551-2-kvalo@kernel.org [mani: wrapped commit message to 75 columns] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-08-02Merge branch 'omap-for-v6.5/ti-sysc' into omap-for-v6.5/fixesTony Lindgren1-0/+2
Merge in a missed change into fixes. Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-07-31bus: sunxi-rsb: Convert to devm_platform_ioremap_resource()Yangtao Li1-3/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@vivo.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230706072042.31296-1-frank.li@vivo.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-07-21bus: tegra-gmi: Convert to devm_platform_ioremap_resource()Yangtao Li1-3/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-07-19bus: imx-weim: use devm_platform_ioremap_resourceMartin Kaiser1-1/+1
devm_platform_get_and_ioremap_resource maps a resource and returns its physical address. If we don't need the physical address, we should call devm_platform_ioremap_resource instead. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-13bus: vexpress-config: Convert to devm_platform_ioremap_resource()Yangtao Li1-3/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230706072042.31296-6-frank.li@vivo.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-07-13bus: mhi: host: use vmalloc_array and vcallocJulia Lawall1-1/+1
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-11-Julia.Lawall@inria.fr Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-07-12bus: mhi: host: pci_generic: Add support for Dell DW5932eSlark Xiao1-0/+6
The DW5932e has 2 variants: eSIM(DW5932e-eSIM) and non-eSIM(DW5932e). Both of them are designed based on Qualcomm SDX62 and it will align with the Foxconn sdx65 settings. Signed-off-by: Slark Xiao <slark_xiao@163.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/20230712083741.7615-1-slark_xiao@163.com Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-07-12bus: mhi: host: pci_generic: Add support for Quectel RM520N-GL modemDuke Xin (辛安文)1-0/+13
Add MHI interface definition for RM520 product based on Qualcomm SDX6X chip Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/20230630062318.12114-1-duke_xinanwen@163.com Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-07-12bus: mhi: host: pci_generic: Add support for Quectel EM160R-GL modemDuke Xin (辛安文)1-0/+2
This modem is identical to the previous EM160R-GL modem with same product name. But this one is designed for a specific laptop usecase, hence Quectel got a new PID. Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/20230608092927.2893-1-duke_xinanwen@163.com [mani: modified the commit message and subject] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-07-12bus: mhi: host: pci_generic: Add support for IP_SW0 channelsManivannan Sadhasivam1-4/+22
IP_SW0 channels are used to transfer data over the networking interface between MHI endpoint and the host. Define the channels in the MHI v1 channel config along with dedicated event rings. Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/20230519135803.13850-1-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-07-12bus: mhi: host: Skip MHI reset if device is in RDDMQiang Yu1-0/+5
In RDDM EE, device can not process MHI reset issued by host. In case of MHI power off, host is issuing MHI reset and polls for it to get cleared until it times out. Since this timeout can not be avoided in case of RDDM, skip the MHI reset in this scenarios. Cc: <stable@vger.kernel.org> Fixes: a6e2e3522f29 ("bus: mhi: core: Add support for PM state transitions") Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/1684390959-17836-1-git-send-email-quic_qianyu@quicinc.com Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-07-06Merge tag 'soc-fixes-6.5-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC fixes from Arnd Bergmann: "There are three small fixes that came up sincie the past week: - an incorrect bit offset in ixp4xx bus driver - a riscv randconfig regression in the thead platform I merged - whitespace fixes for some dts files" * tag 'soc-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: bus: ixp4xx: fix IXP4XX_EXP_T1_MASK ARM: dts: st: add missing space before { RISC-V: make ARCH_THEAD preclude XIP_KERNEL
2023-07-05bus: ixp4xx: fix IXP4XX_EXP_T1_MASKJonas Gorski1-1/+1
The IXP4XX_EXP_T1_MASK was shifted one bit to the right, overlapping IXP4XX_EXP_T2_MASK and leaving bit 29 unused. The offset being wrong is also confirmed at least by the datasheet of IXP45X/46X [1]. Fix this by aligning it to IXP4XX_EXP_T1_SHIFT. [1] https://www.intel.com/content/dam/www/public/us/en/documents/manuals/ixp45x-ixp46x-developers-manual.pdf Cc: stable@vger.kernel.org Fixes: 1c953bda90ca ("bus: ixp4xx: Add a driver for IXP4xx expansion bus") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Link: https://lore.kernel.org/r/20230624112958.27727-1-jonas.gorski@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230624122139.3229642-1-linus.walleij@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-07-03Merge tag 'char-misc-6.5-rc1' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull Char/Misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem updates for 6.5-rc1. Lots of different, tiny, stuff in here, from a range of smaller driver subsystems, including pulls from some substems directly: - IIO driver updates and additions - W1 driver updates and fixes (and a new maintainer!) - FPGA driver updates and fixes - Counter driver updates - Extcon driver updates - Interconnect driver updates - Coresight driver updates - mfd tree tag merge needed for other updates on top of that, lots of small driver updates as patches, including: - static const updates for class structures - nvmem driver updates - pcmcia driver fix - lots of other small driver updates and fixes All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits) bsr: fix build problem with bsr_class static cleanup comedi: make all 'class' structures const char: xillybus: make xillybus_class a static const structure xilinx_hwicap: make icap_class a static const structure virtio_console: make port class a static const structure ppdev: make ppdev_class a static const structure char: misc: make misc_class a static const structure /dev/mem: make mem_class a static const structure char: lp: make lp_class a static const structure dsp56k: make dsp56k_class a static const structure bsr: make bsr_class a static const structure oradax: make 'cl' a static const structure hwtracing: hisi_ptt: Fix potential sleep in atomic context hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU hwtracing: hisi_ptt: Export available filters through sysfs hwtracing: hisi_ptt: Add support for dynamically updating the filter list hwtracing: hisi_ptt: Factor out filter allocation and release operation samples: pfsm: add CC_CAN_LINK dependency misc: fastrpc: check return value of devm_kasprintf() coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable() ...
2023-06-27Merge tag 'soc-fsl-next-v6.5' of ↵Arnd Bergmann3-31/+23
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into soc/drivers NXP/FSL SoC driver updates for v6.5 - fsl-mc: Make remove function return void - QE USB: fix build issue caused by missing dependency * tag 'soc-fsl-next-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: bus: fsl-mc: fsl-mc-allocator: Drop a write-only variable bus: fsl-mc: fsl-mc-allocator: Initialize mc_bus_dev before use soc/fsl/qe: fix usb.c build errors bus: fsl-mc: Make remove function return void soc: fsl: dpio: Suppress duplicated error reporting on device remove bus: fsl-mc: fsl-mc-allocator: Improve error reporting bus: fsl-mc: fsl-mc-allocator: Drop if block with always wrong condition bus: fsl-mc: dprc: Push down error message from fsl_mc_driver_remove() bus: fsl-mc: Only warn once about errors on device unbind Link: https://lore.kernel.org/r/20230621222503.12402-1-leoyang.li@nxp.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-15bus: fsl-mc: don't assume child devices are all fsl-mc devicesLaurentiu Tudor1-0/+6
Changes in VFIO caused a pseudo-device to be created as child of fsl-mc devices causing a crash [1] when trying to bind a fsl-mc device to VFIO. Fix this by checking the device type when enumerating fsl-mc child devices. [1] Modules linked in: Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP CPU: 6 PID: 1289 Comm: sh Not tainted 6.2.0-rc5-00047-g7c46948a6e9c #2 Hardware name: NXP Layerscape LX2160ARDB (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mc_send_command+0x24/0x1f0 lr : dprc_get_obj_region+0xfc/0x1c0 sp : ffff80000a88b900 x29: ffff80000a88b900 x28: ffff48a9429e1400 x27: 00000000000002b2 x26: ffff48a9429e1718 x25: 0000000000000000 x24: 0000000000000000 x23: ffffd59331ba3918 x22: ffffd59331ba3000 x21: 0000000000000000 x20: ffff80000a88b9b8 x19: 0000000000000000 x18: 0000000000000001 x17: 7270642f636d2d6c x16: 73662e3030303030 x15: ffffffffffffffff x14: ffffd59330f1d668 x13: ffff48a8727dc389 x12: ffff48a8727dc386 x11: 0000000000000002 x10: 00008ceaf02f35d4 x9 : 0000000000000012 x8 : 0000000000000000 x7 : 0000000000000006 x6 : ffff80000a88bab0 x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000a88b9e8 x2 : ffff80000a88b9e8 x1 : 0000000000000000 x0 : ffff48a945142b80 Call trace: mc_send_command+0x24/0x1f0 dprc_get_obj_region+0xfc/0x1c0 fsl_mc_device_add+0x340/0x590 fsl_mc_obj_device_add+0xd0/0xf8 dprc_scan_objects+0x1c4/0x340 dprc_scan_container+0x38/0x60 vfio_fsl_mc_probe+0x9c/0xf8 fsl_mc_driver_probe+0x24/0x70 really_probe+0xbc/0x2a8 __driver_probe_device+0x78/0xe0 device_driver_attach+0x30/0x68 bind_store+0xa8/0x130 drv_attr_store+0x24/0x38 sysfs_kf_write+0x44/0x60 kernfs_fop_write_iter+0x128/0x1b8 vfs_write+0x334/0x448 ksys_write+0x68/0xf0 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x108 el0_svc_common.constprop.1+0x94/0xf8 do_el0_svc+0x38/0xb0 el0_svc+0x20/0x50 el0t_64_sync_handler+0x98/0xc0 el0t_64_sync+0x174/0x178 Code: aa0103f4 a9025bf5 d5384100 b9400801 (79401260) ---[ end trace 0000000000000000 ]--- Fixes: 3c28a76124b2 ("vfio: Add struct device to vfio_device") Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Message-ID: <20230613160718.29500-1-laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14bus: ti-sysc: Flush posted write on enable before resetTony Lindgren1-0/+2
The am335x devices started producing boot errors for resetting musb module in because of subtle timing changes: Unhandled fault: external abort on non-linefetch (0x1008) ... sysc_poll_reset_sysconfig from sysc_reset+0x109/0x12 sysc_reset from sysc_probe+0xa99/0xeb0 ... The fix is to flush posted write after enable before reset during probe. Note that some devices also need to specify the delay after enable with ti,sysc-delay-us, but this is not needed for musb on am335x based on my tests. Reported-by: kernelci.org bot <bot@kernelci.org> Closes: https://storage.kernelci.org/next/master/next-20230614/arm/multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y/gcc-10/lab-cip/baseline-beaglebone-black.html Fixes: 596e7955692b ("bus: ti-sysc: Add support for software reset") Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-06-09bus: fsl-mc: fsl-mc-allocator: Drop a write-only variableUwe Kleine-König1-4/+1
Fixes a clang compiler warning: drivers/bus/fsl-mc/fsl-mc-allocator.c:565:6: warning: variable 'free_count' set but not used [-Wunused-but-set-variable] int free_count = 0; Fixes: d8e026a44919 ("staging: fsl-mc: remove some superfluous WARN_ONs") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2023-06-09bus: fsl-mc: fsl-mc-allocator: Initialize mc_bus_dev before useUwe Kleine-König1-2/+3
Fixes a clang compiler warning: >> drivers/bus/fsl-mc/fsl-mc-allocator.c:108:12: warning: variable 'mc_bus_dev' is uninitialized when used here [-Wuninitialized] dev_err(&mc_bus_dev->dev, "resource mismatch\n"); Fixes: b3134039c5b3 ("bus: fsl-mc: fsl-mc-allocator: Improve error reporting") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306021936.OktTcMAT-lkp@intel.com/ Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2023-05-31bus: fsl-mc: Make remove function return voidUwe Kleine-König3-10/+5
The value returned by an fsl-mc driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero and then device removal continues unconditionally.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # sanity checks Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2023-05-31bus: fsl-mc: fsl-mc-allocator: Improve error reportingUwe Kleine-König1-5/+13
Instead of silently returning an error in the remove callback (which yields a generic and little informing error message), annotate each error path of fsl_mc_resource_pool_remove_device() with an error message and return zero in the remove callback to suppress the error message. Note that changing the return value has no other effect than suppressing the error message by the fsl_mc bus driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # sanity checks Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2023-05-31bus: fsl-mc: fsl-mc-allocator: Drop if block with always wrong conditionUwe Kleine-König1-6/+0
If fsl_mc_is_allocatable(mc_dev) evaluates to false, the driver won't have bound to that device and then fsl_mc_allocator_remove() is never called for that device. fsl_mc_allocator_remove() is the only caller of fsl_mc_resource_pool_remove_device(), so the same check can be removed from there. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # sanity checks Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2023-05-31bus: fsl-mc: dprc: Push down error message from fsl_mc_driver_remove()Uwe Kleine-König1-5/+4
The error message emitted in fsl_mc_driver_remove() is very generic. Replace it by a message that mentions the reason for the failure. Returning zero instead of a negative value has no side effect apart from suppressing the generic error message. The first if condition in dprc_remove() can never be true, as this would prevent successful probing of the device and then .remove wasn't called. So this can just be dropped. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # sanity checks Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2023-05-31bus: fsl-mc: Only warn once about errors on device unbindUwe Kleine-König1-3/+1
If a platform driver's remove function returns an error code, this results in a (generic and little helpful) error message. Otherwise the value is ignored. As fsl_mc_driver_remove() already emit an error message, return 0 also in the error case. The only effect is to suppress the device core's error message. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # sanity checks Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2023-05-17bus: ti-sysc: Fix dispc quirk masking bool variablesTony Lindgren1-2/+2
Fix warning drivers/bus/ti-sysc.c:1806 sysc_quirk_dispc() warn: masking a bool. While at it let's add a comment for what were doing to make the code a bit easier to follow. Fixes: 7324a7a0d5e2 ("bus: ti-sysc: Implement display subsystem reset quirk") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-omap/a8ec8a68-9c2c-4076-bf47-09fccce7659f@kili.mountain/ Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-04-28Merge tag 'modules-6.4-rc1' of ↵Linus Torvalds7-7/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module updates from Luis Chamberlain: "The summary of the changes for this pull requests is: - Song Liu's new struct module_memory replacement - Nick Alcock's MODULE_LICENSE() removal for non-modules - My cleanups and enhancements to reduce the areas where we vmalloc module memory for duplicates, and the respective debug code which proves the remaining vmalloc pressure comes from userspace. Most of the changes have been in linux-next for quite some time except the minor fixes I made to check if a module was already loaded prior to allocating the final module memory with vmalloc and the respective debug code it introduces to help clarify the issue. Although the functional change is small it is rather safe as it can only *help* reduce vmalloc space for duplicates and is confirmed to fix a bootup issue with over 400 CPUs with KASAN enabled. I don't expect stable kernels to pick up that fix as the cleanups would have also had to have been picked up. Folks on larger CPU systems with modules will want to just upgrade if vmalloc space has been an issue on bootup. Given the size of this request, here's some more elaborate details: The functional change change in this pull request is the very first patch from Song Liu which replaces the 'struct module_layout' with a new 'struct module_memory'. The old data structure tried to put together all types of supported module memory types in one data structure, the new one abstracts the differences in memory types in a module to allow each one to provide their own set of details. This paves the way in the future so we can deal with them in a cleaner way. If you look at changes they also provide a nice cleanup of how we handle these different memory areas in a module. This change has been in linux-next since before the merge window opened for v6.3 so to provide more than a full kernel cycle of testing. It's a good thing as quite a bit of fixes have been found for it. Jason Baron then made dynamic debug a first class citizen module user by using module notifier callbacks to allocate / remove module specific dynamic debug information. Nick Alcock has done quite a bit of work cross-tree to remove module license tags from things which cannot possibly be module at my request so to: a) help him with his longer term tooling goals which require a deterministic evaluation if a piece a symbol code could ever be part of a module or not. But quite recently it is has been made clear that tooling is not the only one that would benefit. Disambiguating symbols also helps efforts such as live patching, kprobes and BPF, but for other reasons and R&D on this area is active with no clear solution in sight. b) help us inch closer to the now generally accepted long term goal of automating all the MODULE_LICENSE() tags from SPDX license tags In so far as a) is concerned, although module license tags are a no-op for non-modules, tools which would want create a mapping of possible modules can only rely on the module license tag after the commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"). Nick has been working on this *for years* and AFAICT I was the only one to suggest two alternatives to this approach for tooling. The complexity in one of my suggested approaches lies in that we'd need a possible-obj-m and a could-be-module which would check if the object being built is part of any kconfig build which could ever lead to it being part of a module, and if so define a new define -DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've suggested would be to have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as well but that means getting kconfig symbol names mapping to modules always, and I don't think that's the case today. I am not aware of Nick or anyone exploring either of these options. Quite recently Josh Poimboeuf has pointed out that live patching, kprobes and BPF would benefit from resolving some part of the disambiguation as well but for other reasons. The function granularity KASLR (fgkaslr) patches were mentioned but Joe Lawrence has clarified this effort has been dropped with no clear solution in sight [1]. In the meantime removing module license tags from code which could never be modules is welcomed for both objectives mentioned above. Some developers have also welcomed these changes as it has helped clarify when a module was never possible and they forgot to clean this up, and so you'll see quite a bit of Nick's patches in other pull requests for this merge window. I just picked up the stragglers after rc3. LWN has good coverage on the motivation behind this work [2] and the typical cross-tree issues he ran into along the way. The only concrete blocker issue he ran into was that we should not remove the MODULE_LICENSE() tags from files which have no SPDX tags yet, even if they can never be modules. Nick ended up giving up on his efforts due to having to do this vetting and backlash he ran into from folks who really did *not understand* the core of the issue nor were providing any alternative / guidance. I've gone through his changes and dropped the patches which dropped the module license tags where an SPDX license tag was missing, it only consisted of 11 drivers. To see if a pull request deals with a file which lacks SPDX tags you can just use: ./scripts/spdxcheck.py -f \ $(git diff --name-only commid-id | xargs echo) You'll see a core module file in this pull request for the above, but that's not related to his changes. WE just need to add the SPDX license tag for the kernel/module/kmod.c file in the future but it demonstrates the effectiveness of the script. Most of Nick's changes were spread out through different trees, and I just picked up the slack after rc3 for the last kernel was out. Those changes have been in linux-next for over two weeks. The cleanups, debug code I added and final fix I added for modules were motivated by David Hildenbrand's report of boot failing on a systems with over 400 CPUs when KASAN was enabled due to running out of virtual memory space. Although the functional change only consists of 3 lines in the patch "module: avoid allocation if module is already present and ready", proving that this was the best we can do on the modules side took quite a bit of effort and new debug code. The initial cleanups I did on the modules side of things has been in linux-next since around rc3 of the last kernel, the actual final fix for and debug code however have only been in linux-next for about a week or so but I think it is worth getting that code in for this merge window as it does help fix / prove / evaluate the issues reported with larger number of CPUs. Userspace is not yet fixed as it is taking a bit of time for folks to understand the crux of the issue and find a proper resolution. Worst come to worst, I have a kludge-of-concept [3] of how to make kernel_read*() calls for modules unique / converge them, but I'm currently inclined to just see if userspace can fix this instead" Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0] Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1] Link: https://lwn.net/Articles/927569/ [2] Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3] * tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits) module: add debugging auto-load duplicate module support module: stats: fix invalid_mod_bytes typo module: remove use of uninitialized variable len module: fix building stats for 32-bit targets module: stats: include uapi/linux/module.h module: avoid allocation if module is already present and ready module: add debug stats to help identify memory pressure module: extract patient module check into helper modules/kmod: replace implementation with a semaphore Change DEFINE_SEMAPHORE() to take a number argument module: fix kmemleak annotations for non init ELF sections module: Ignore L0 and rename is_arm_mapping_symbol() module: Move is_arm_mapping_symbol() to module_symbol.h module: Sync code of is_arm_mapping_symbol() scripts/gdb: use mem instead of core_layout to get the module address interconnect: remove module-related code interconnect: remove MODULE_LICENSE in non-modules zswap: remove MODULE_LICENSE in non-modules zpool: remove MODULE_LICENSE in non-modules x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules ...
2023-04-27Merge tag 'char-misc-6.4-rc1' of ↵Linus Torvalds5-35/+54
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc drivers updates from Greg KH: "Here is the "big" set of char/misc and other driver subsystems for 6.4-rc1. It's pretty big, but due to the removal of pcmcia drivers, almost breaks even for number of lines added vs. removed, a nice change. Included in here are: - removal of unused PCMCIA drivers (finally!) - Interconnect driver updates and additions - Lots of IIO driver updates and additions - MHI driver updates - Coresight driver updates - NVMEM driver updates, which required some OF updates - W1 driver updates and a new maintainer to manage the subsystem - FPGA driver updates - New driver subsystem, CDX, for AMD systems - lots of other small driver updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits) mcb-lpc: Reallocate memory region to avoid memory overlapping mcb-pci: Reallocate memory region to avoid memory overlapping mcb: Return actual parsed size when reading chameleon table kernel/configs: Drop Android config fragments virt: acrn: Replace obsolete memalign() with posix_memalign() spmi: Add a check for remove callback when removing a SPMI driver spmi: fix W=1 kernel-doc warnings spmi: mtk-pmif: Drop of_match_ptr for ID table spmi: pmic-arb: Convert to platform remove callback returning void spmi: mtk-pmif: Convert to platform remove callback returning void spmi: hisi-spmi-controller: Convert to platform remove callback returning void w1: gpio: remove unnecessary ENOMEM messages w1: omap-hdq: remove unnecessary ENOMEM messages w1: omap-hdq: add SPDX tag w1: omap-hdq: allow compile testing w1: matrox: remove unnecessary ENOMEM messages w1: matrox: use inline over __inline__ w1: matrox: switch from asm to linux header w1: ds2482: do not use assignment in if condition w1: ds2482: drop unnecessary header ...
2023-04-27Merge tag 'driver-core-6.4-rc1' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...