summaryrefslogtreecommitdiff
path: root/drivers/bus
AgeCommit message (Collapse)AuthorFilesLines
2021-11-13Merge tag 'mips_5.16_1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull more MIPS updates from Thomas Bogendoerfer: - Config updates for BMIPS platform - Build fixes - Makefile cleanups * tag 'mips_5.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: decompressor: do not copy source files while building MIPS: boot/compressed/: add __bswapdi2() to target for ZSTD decompression MIPS: fix duplicated slashes for Platform file path MIPS: fix *-pkg builds for loongson2ef platform PCI: brcmstb: Allow building for BMIPS_GENERIC MIPS: BMIPS: Enable PCI Kconfig MIPS: VDSO: remove -nostdlib compiler flag mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set MIPS: Update bmips_stb_defconfig MIPS: Allow modules to set board_be_handler
2021-11-09MIPS: Allow modules to set board_be_handlerFlorian Fainelli1-1/+1
After making the brcmstb_gisb driver modular with 707a4cdf86e5 ("bus: brcmstb_gisb: Allow building as module") Guenter reported that mips allmodconfig failed to link because board_be_handler was referenced. Thomas indicated that if we were to continue making the brcmstb_gisb driver modular for MIPS we would need to introduce a function that allows setting the board_be_handler and export that function towards modules. This is what is being done here: board_be_handler is made static and is now settable with a mips_set_be_handler() function which is exported. Reported-by: Guenter Roeck <linux@roeck-us.net> Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Fixes: 707a4cdf86e5 ("bus: brcmstb_gisb: Allow building as module") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-04Merge tag 'drivers-5.16' of ↵Linus Torvalds4-41/+251
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "These are all the driver updates for SoC specific drivers. There are a couple of subsystems with individual maintainers picking up their patches here: - The reset controller subsystem add support for a few new SoC variants to existing drivers, along with other minor improvements - The OP-TEE subsystem gets a driver for the ARM FF-A transport - The memory controller subsystem has improvements for Tegra, Mediatek, Renesas, Freescale and Broadcom specific drivers. - The tegra cpuidle driver changes get merged through this tree this time. There are only minor changes, but they depend on other tegra driver updates here. - The ep93xx platform finally moves to using the drivers/clk/ subsystem, moving the code out of arch/arm in the process. This depends on a small sound driver change that is included here as well. - There are some minor updates for Qualcomm and Tegra specific firmware drivers. The other driver updates are mainly for drivers/soc, which contains a mixture of vendor specific drivers that don't really fit elsewhere: - Mediatek drivers gain more support for MT8192, with new support for hw-mutex and mmsys routing, plus support for reset lines in the mmsys driver. - Qualcomm gains a new "sleep stats" driver, and support for the "Generic Packet Router" in the APR driver. - There is a new user interface for routing the UARTS on ASpeed BMCs, something that apparently nobody else has needed so far. - More drivers can now be built as loadable modules, in particular for Broadcom and Samsung platforms. - Lots of improvements to the TI sysc driver for better suspend/resume support" Finally, there are lots of minor cleanups and new device IDs for amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape, allwinner, broadcom, and omap" * tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits) optee: Fix spelling mistake "reclain" -> "reclaim" Revert "firmware: qcom: scm: Add support for MC boot address API" qcom: spm: allow compile-testing firmware: arm_ffa: Remove unused 'compat_version' variable soc: samsung: exynos-chipid: add exynosautov9 SoC support firmware: qcom: scm: Don't break compile test on non-ARM platforms soc: qcom: smp2p: Add of_node_put() before goto soc: qcom: apr: Add of_node_put() before return soc: qcom: qcom_stats: Fix client votes offset soc: qcom: rpmhpd: fix sm8350_mxc's peer domain dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226 firmware: qcom: scm: Add support for MC boot address API soc: qcom: spm: Add 8916 SPM register data dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu soc: qcom: socinfo: Add PM8150C and SMB2351 models firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available() soc: aspeed: Add UART routing support soc: fsl: dpio: rename the enqueue descriptor variable soc: fsl: dpio: use an explicit NULL instead of 0 ...
2021-11-03Merge tag 'vfio-v5.16-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds3-5/+140
Pull VFIO updates from Alex Williamson: - Cleanup vfio iommu_group creation (Christoph Hellwig) - Add individual device reset for vfio/fsl-mc (Diana Craciun) - IGD OpRegion 2.0+ support (Colin Xu) - Use modern cdev lifecycle for vfio_group (Jason Gunthorpe) - Use new mdev API in vfio_ccw (Jason Gunthorpe) * tag 'vfio-v5.16-rc1' of git://github.com/awilliam/linux-vfio: (27 commits) vfio/ccw: Convert to use vfio_register_emulated_iommu_dev() vfio/ccw: Pass vfio_ccw_private not mdev_device to various functions vfio/ccw: Use functions for alloc/free of the vfio_ccw_private vfio/ccw: Remove unneeded GFP_DMA vfio: Use cdev_device_add() instead of device_create() vfio: Use a refcount_t instead of a kref in the vfio_group vfio: Don't leak a group reference if the group already exists vfio: Do not open code the group list search in vfio_create_group() vfio: Delete vfio_get/put_group from vfio_iommu_group_notifier() vfio/pci: Add OpRegion 2.0+ Extended VBT support. vfio/iommu_type1: remove IS_IOMMU_CAP_DOMAIN_IN_CONTAINER vfio/iommu_type1: remove the "external" domain vfio/iommu_type1: initialize pgsize_bitmap in ->open vfio/spapr_tce: reject mediated devices vfio: clean up the check for mediated device in vfio_iommu_type1 vfio: remove the unused mdev iommu hook vfio: move the vfio_iommu_driver_ops interface out of <linux/vfio.h> vfio: remove unused method from vfio_iommu_driver_ops vfio: simplify iommu group allocation for mediated devices vfio: remove the iommudata hack for noiommu groups ...
2021-10-20Merge tag 'sunxi-drivers-for-5.16-1' of ↵Arnd Bergmann1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers Some new drivers changes for the Allwinner SoCs, converting to a helper and improving logging. * tag 'sunxi-drivers-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: bus: sun50i-de2: Adjust printing error message soc: sunxi_sram: Make use of the helper function devm_platform_ioremap_resource() Link: https://lore.kernel.org/r/ad0aa469-9e1b-4bb6-a116-92648ed774fa.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-18Merge tag 'driver-core-5.15-rc6' of ↵Linus Torvalds3-16/+40
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some small driver core fixes for 5.15-rc6, all of which have been in linux-next for a while with no reported issues. They include: - kernfs negative dentry bugfix - simple pm bus fixes to resolve reported issues" * tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers: bus: Delete CONFIG_SIMPLE_PM_BUS drivers: bus: simple-pm-bus: Add support for probing simple bus only devices driver core: Reject pointless SYNC_STATE_ONLY device links kernfs: don't create a negative dentry if inactive node exists
2021-10-14Merge tag 'arm-soc/for-5.16/drivers' of https://github.com/Broadcom/stblinux ↵Arnd Bergmann2-2/+7
into arm/drivers This pull request contains Broadcom ARM/ARM64 SoC drivers changes for 5.16, please pull the following: - Cai updates the bcm-pmb and bcm63xx-power drivers to use the devm_platform_ioremap_resource() helper - Florian updates the Bus Interface Unit code to tune the 72116 and 72113 chips according to their existing counterparts. The GISB driver is updated to be built as a non-removable module * tag 'arm-soc/for-5.16/drivers' of https://github.com/Broadcom/stblinux: bus: brcmstb_gisb: Allow building as module soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72116 soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72113 soc: bcm63xx-power: Make use of the helper function devm_platform_ioremap_resource() soc: bcm: bcm-pmb: Make use of the helper function devm_platform_ioremap_resource() Link: https://lore.kernel.org/r/20211013174016.831348-3-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-13bus: sun50i-de2: Adjust printing error messageJernej Skrabec1-4/+3
SRAM driver often returns -EPROBE_DEFER and thus this bus driver often prints error message, even if it probes successfully later. This is confusing for users and they often think that something is wrong. Use dev_err_probe() helper for printing error message. It handles -EPROBE_DEFER automatically. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211010071812.145178-1-jernej.skrabec@gmail.com
2021-10-06bus: ti-sysc: Fix variable set but not used warning for reinit_modulesTony Lindgren1-2/+1
Fix drivers/bus/ti-sysc.c:2494:13: error: variable 'error' set but not used introduced by commit 9d881361206e ("bus: ti-sysc: Add quirk handling for reinit on context lost"). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-06bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893Tony Lindgren1-0/+3
Commit 94f6345712b3 ("bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO") should have also added the quirk for dra7 dcan1 in addition to dcan2 for errata i893 handling. Let's also pass the quirk flag for legacy mode booting for if "ti,hwmods" dts property is used with related dcan hwmod data. This should be only needed if anybody needs to git bisect earlier stable trees though. Fixes: 94f6345712b3 ("bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO") Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-06Merge branch 'pruss-fix' into fixesTony Lindgren12-136/+738
Merge in a fix for pruss reset issue caused by enabling pruss for am335x.
2021-10-05drivers: bus: Delete CONFIG_SIMPLE_PM_BUSSaravana Kannan2-13/+1
The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to work with fw_devlink. So, always compile it in for CONFIG_OF and delete the config since it's no longer necessary. Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210929000735.585237-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05drivers: bus: simple-pm-bus: Add support for probing simple bus only devicesSaravana Kannan1-3/+39
fw_devlink could end up creating device links for bus only devices. However, bus only devices don't get probed and can block probe() or sync_state() [1] call backs of other devices. To avoid this, probe these devices using the simple-pm-bus driver. However, there are instances of devices that are not simple buses (they get probed by their specific drivers) that also list the "simple-bus" (or other bus only compatible strings) in their compatible property to automatically populate their child devices. We still want these devices to get probed by their specific drivers. So, we make sure this driver only probes devices that are only buses. [1] - https://lore.kernel.org/lkml/CAPDyKFo9Bxremkb1dDrr4OcXSpE0keVze94Cm=zrkOVxHHxBmQ@mail.gmail.com/ Fixes: c442a0d18744 ("driver core: Set fw_devlink to "permissive" behavior by default") Cc: stable <stable@vger.kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Tested-by: Saravana Kannan <saravanak@google.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210929000735.585237-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-29bus/fsl-mc: Add generic implementation for open/reset/close commandsDiana Craciun3-5/+140
The open/reset/close commands format is similar for all objects. Currently there are multiple implementations for these commands scattered through various drivers. The code is cavsi-identical. Create a generic implementation for the open/reset/close commands. One of the consumer will be the VFIO driver which needs to be able to reset a device. Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20210922110530.24736-1-diana.craciun@oss.nxp.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-09-28bus: brcmstb_gisb: Allow building as moduleFlorian Fainelli2-2/+7
Allow building the Broadcom STB GISB arbiter driver as a module, however similar to interrupt controller drivers, don't allow its unbind/removal since it is not quite prepared for that and we want it to catch bus errors all the time. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-21bus: ti-sysc: Drop legacy quirk flag for shamTony Lindgren1-2/+1
There is no need for the legacy flag any longer for gpio as the omap-sham driver has been fixed to not rely on pm_runtime_irq_safe(). Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-09-21bus: ti-sysc: Drop legacy quirk flag for gpioTony Lindgren1-2/+2
There is no need for the legacy flag any longer for gpio as the gpio-omap driver has been fixed to not rely on pm_runtime_irq_safe(). Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-09-21bus: ti-sysc: Handle otg force idle quirkTony Lindgren1-1/+23
Let's add handling the otg force idle quirk for the old omap2430 glue layer used up to omap4 as the musb driver quirk only works if the driver is loaded. Unlike with the am335x glue layer, looks like we don't need the quirk handling for SYSC_QUIRK_REINIT_ON_CTX_LOST. Eventually when all the musb using SoCs are booting with device tree based configuration, we can just remove the related quirk handling from the musb driver. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-09-21bus: ti-sysc: Use context lost quirk for otgTony Lindgren1-1/+1
Let's use SYSC_QUIRK_REINIT_ON_CTX_LOST quirk for am335x otg instead of SYSC_QUIRK_REINIT_ON_RESUME quirk as we can now handle the context loss in a more generic way. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-09-21bus: ti-sysc: Use context lost quirks for gpmcTony Lindgren1-0/+1
At least on am335x, the gpmc module needs a re-init and reset if context has been lost on resume. We can enable this for all gpmc revisions as we check if the context was lost before restoring it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-09-21bus: ti-sysc: Add quirk handling for reset on re-initTony Lindgren1-0/+10
At least am335x gpmc module needs a reset in addition to re-init on resume. Let's add a quirk handling for reset on re-init. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-09-21bus: ti-sysc: Add quirk handling for reinit on context lostTony Lindgren1-6/+102
Some interconnect target modules such as otg and gpmc on am335x need a re-init after resume. As we also have PM runtime cases where the context may be lost, let's handle these all with cpu_pm. For the am335x resume path, we already have cpu_pm_resume() call cpu_pm_cluster_exit(). Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-09-21bus: ti-sysc: Check for lost context in sysc_reinit_module()Tony Lindgren1-11/+49
There is no need to restore context if it was not lost. Let's add a new function sysc_check_context() to check for lost context. To make use of it, we need to save the sysconfig register status on enable and disable. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-09-21bus: ti-sysc: Fix timekeeping_suspended warning on resumeTony Lindgren1-12/+53
On resume we can get a warning at kernel/time/timekeeping.c:824 for timekeeping_suspended. Let's fix this by adding separate functions for sysc_poll_reset_sysstatus() and sysc_poll_reset_sysconfig() and have the new functions handle also timekeeping_suspended. If iopoll at some point supports timekeeping_suspended, we can just drop the custom handling from these functions. Fixes: d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit") Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-09-02Merge tag 'drivers-5.15' of ↵Linus Torvalds4-10/+448
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ...
2021-09-01Merge tag 'driver-core-5.15-rc1' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core patches for 5.15-rc1. These do change a number of different things across different subsystems, and because of that, there were 2 stable tags created that might have already come into your tree from different pulls that did the following - changed the bus remove callback to return void - sysfs iomem_get_mapping rework Other than those two things, there's only a few small things in here: - kernfs performance improvements for huge numbers of sysfs users at once - tiny api cleanups - other minor changes All of these have been in linux-next for a while with no reported problems, other than the before-mentioned merge issue" * tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits) MAINTAINERS: Add dri-devel for component.[hc] driver core: platform: Remove platform_device_add_properties() ARM: tegra: paz00: Handle device properties with software node API bitmap: extend comment to bitmap_print_bitmask/list_to_buf drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI topology: use bin_attribute to break the size limitation of cpumap ABI lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list sysfs: Rename struct bin_attribute member to f_mapping sysfs: Invoke iomem_get_mapping() from the sysfs open callback debugfs: Return error during {full/open}_proxy_open() on rmmod zorro: Drop useless (and hardly used) .driver member in struct zorro_dev zorro: Simplify remove callback sh: superhyway: Simplify check in remove callback nubus: Simplify check in remove callback nubus: Make struct nubus_driver::remove return void kernfs: dont call d_splice_alias() under kernfs node lock kernfs: use i_lock to protect concurrent inode updates kernfs: switch kernfs to use an rwsem kernfs: use VFS negative dentry caching ...
2021-09-01Merge tag 'char-misc-5.15-rc1' of ↵Linus Torvalds7-108/+234
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big set of char/misc driver changes for 5.15-rc1. Lots of different driver subsystems are being updated in here, notably: - mhi subsystem update - fpga subsystem update - coresight/hwtracing subsystem update - interconnect subsystem update - nvmem subsystem update - parport drivers update - phy subsystem update - soundwire subsystem update and there are some other char/misc drivers being updated as well: - binder driver additions - new misc drivers - lkdtm driver updates - mei driver updates - sram driver updates - other minor driver updates. Note, there are no habanalabs driver updates in this pull request, that will probably come later before -rc1 is out in a different request. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits) Revert "bus: mhi: Add inbound buffers allocation flag" misc/pvpanic: fix set driver data VMCI: fix NULL pointer dereference when unmapping queue pair char: mware: fix returnvar.cocci warnings parport: remove non-zero check on count soundwire: cadence: do not extend reset delay soundwire: intel: conditionally exit clock stop mode on system suspend soundwire: intel: skip suspend/resume/wake when link was not started soundwire: intel: fix potential race condition during power down phy: qcom-qmp: Add support for SM6115 UFS phy dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings phy: qmp: Provide unique clock names for DP clocks lkdtm: remove IDE_CORE_CP crashpoint lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ coresight: Replace deprecated CPU-hotplug functions. Documentation: coresight: Add documentation for CoreSight config coresight: syscfg: Add initial configfs support coresight: config: Add preloaded configurations coresight: etm4x: Add complex configuration handlers to etmv4 coresight: etm-perf: Update to activate selected configuration ...
2021-08-27Revert "bus: mhi: Add inbound buffers allocation flag"Greg Kroah-Hartman2-7/+4
This reverts commit 0092a1e3f7636ff4e202a41b0320690699247e22 This should be reverted in the char-misc-next branch to make merging with Linus's branch possible due to issues with the mhi code that was found in the networking tree. Link: https://lore.kernel.org/r/20210827175852.GB15018@thinkpad Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bhaumik Bhatt <bbhatt@codeaurora.org> Cc: Hemant Kumar <hemantk@codeaurora.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-8/+7
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26Merge tag 'net-5.14-rc8' of ↵Linus Torvalds2-7/+4
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from can and bpf. Closing three hw-dependent regressions. Any fixes of note are in the 'old code' category. Nothing blocking release from our perspective. Current release - regressions: - stmmac: revert "stmmac: align RX buffers" - usb: asix: ax88772: move embedded PHY detection as early as possible - usb: asix: do not call phy_disconnect() for ax88178 - Revert "net: really fix the build...", from Kalle to fix QCA6390 Current release - new code bugs: - phy: mediatek: add the missing suspend/resume callbacks Previous releases - regressions: - qrtr: fix another OOB Read in qrtr_endpoint_post - stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings Previous releases - always broken: - inet: use siphash in exception handling - ip_gre: add validation for csum_start - bpf: fix ringbuf helper function compatibility - rtnetlink: return correct error on changing device netns - e1000e: do not try to recover the NVM checksum on Tiger Lake" * tag 'net-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits) Revert "net: really fix the build..." net: hns3: fix get wrong pfc_en when query PFC configuration net: hns3: fix GRO configuration error after reset net: hns3: change the method of getting cmd index in debugfs net: hns3: fix duplicate node in VLAN list net: hns3: fix speed unknown issue in bond 4 net: hns3: add waiting time before cmdq memory is released net: hns3: clear hardware resource when loading driver net: fix NULL pointer reference in cipso_v4_doi_free rtnetlink: Return correct error on changing device netns net: dsa: hellcreek: Adjust schedule look ahead window net: dsa: hellcreek: Fix incorrect setting of GCL cxgb4: dont touch blocked freelist bitmap after free ipv4: use siphash instead of Jenkins in fnhe_hashfun() ipv6: use siphash in rt6_exception_hash() can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters net: usb: asix: ax88772: fix boolconv.cocci warnings net/sched: ets: fix crash when flipping from 'strict' to 'quantum' qede: Fix memset corruption net: stmmac: fix kernel panic due to NULL pointer dereference of buf->xdp ...
2021-08-26Revert "net: really fix the build..."Kalle Valo2-7/+4
This reverts commit ce78ffa3ef1681065ba451cfd545da6126f5ca88. Wren and Nicolas reported that ath11k was failing to initialise QCA6390 Wi-Fi 6 device with error: qcom_mhi_qrtr: probe of mhi0_IPCR failed with error -22 Commit ce78ffa3ef16 ("net: really fix the build..."), introduced in v5.14-rc5, caused this regression in qrtr. Most likely all ath11k devices are broken, but I only tested QCA6390. Let's revert the broken commit so that ath11k works again. Reported-by: Wren Turkal <wt@penguintechs.org> Reported-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210826172816.24478-1-kvalo@codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24Merge 5.14-rc7 into char-misc-nextGreg Kroah-Hartman1-1/+3
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-19Merge tag 'omap-for-v5.14/gpt12-fix-signed' of ↵Arnd Bergmann1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fix for omap gpt12 timer error handling Two of the recent fixes for ti-sysc driver had bad interaction for a function return value that caused one of the fixes to not work so we need to change the return value handling. Otherwise early beagleboard variants still have a boot issue. * tag 'omap-for-v5.14/gpt12-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix error handling for sysc_check_active_timer() Link: https://lore.kernel.org/r/pull-1629354796-830948@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-19bus: ti-sysc: Add break in switch statement in sysc_init_soc()Nathan Chancellor1-0/+1
After commit a6d90e9f2232 ("bus: ti-sysc: AM3: RNG is GP only"), clang with -Wimplicit-fallthrough enabled warns: drivers/bus/ti-sysc.c:2958:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] default: ^ drivers/bus/ti-sysc.c:2958:3: note: insert 'break;' to avoid fall-through default: ^ break; 1 warning generated. Clang's version of this warning is a little bit more pedantic than GCC's. Add the missing break to satisfy it to match what has been done all over the kernel tree. Fixes: a6d90e9f2232 ("bus: ti-sysc: AM3: RNG is GP only") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-7/+15
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-12Merge tag 'drivers_soc_for_5.15' of ↵Arnd Bergmann1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers soc: Keystone SOC drivers for v5.15 The pull request contains: - ICSSG subsystem support for Keystone3 AM64x SOCs - Removes smartrefelx PM dependency for deeper low power states * tag 'drivers_soc_for_5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs Link: https://lore.kernel.org/r/0A637A41-2353-4900-962C-DBE50BBDE75A@oracle.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12bus: ixp4xx: return on error in ixp4xx_exp_probe()Dan Carpenter1-1/+1
This code was intended to return an error code if regmap_read() fails but the return statement was missing. Fixes: 1c953bda90ca ("bus: ixp4xx: Add a driver for IXP4xx expansion bus") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210807230016.3607666-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'omap-for-v5.15/ti-sysc-signed' of ↵Arnd Bergmann1-13/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers Driver changes for ti-sysc for v5.15 Few ti-sysc changes to handle quirk for McASP SIDLE mode, correct documentation for sysc_ioremap(), and start using pm_runtime_resume_and_get(). * tag 'omap-for-v5.15/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Add quirk for OMAP4 McASP to disable SIDLE mode bus: ti-sysc: using pm_runtime_resume_and_get instead of pm_runtime_get_sync bus: ti-sysc: Correct misdocumentation of 'sysc_ioremap()' bus: ti-sysc: Fix gpt12 system timer issue with reserved status Link: https://lore.kernel.org/r/pull-1628153040-834155@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-11bus: ti-sysc: Fix error handling for sysc_check_active_timer()Tony Lindgren1-1/+3
We have changed the return type for sysc_check_active_timer() from -EBUSY to -ENXIO, but the gpt12 system timer fix still checks for -EBUSY. We are also not returning on other errors like we did earlier as noted by Pavel Machek <pavel@denx.de>. Commit 3ff340e24c9d ("bus: ti-sysc: Fix gpt12 system timer issue with reserved status") should have been updated for commit 65fb73676112 ("bus: ti-sysc: suppress err msg for timers used as clockevent/source"). Let's fix the issue by checking for -ENXIO and returning on any other errors as suggested by Pavel Machek <pavel@denx.de>. Fixes: 3ff340e24c9d ("bus: ti-sysc: Fix gpt12 system timer issue with reserved status") Depends-on: 65fb73676112 ("bus: ti-sysc: suppress err msg for timers used as clockevent/source") Reported-by: Pavel Machek <pavel@denx.de> Reviewed-by: Pavel Machek (CIP) <pavel@denx.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-08-11soc: ti: Remove pm_runtime_irq_safe() usage for smartreflexTony Lindgren1-4/+2
For the smartreflex device, we need to disable smartreflex on SoC idle, and have been using pm_runtime_irq_safe() to do that. But we want to remove the irq_safe usage as PM runtime takes a permanent usage count on the parent device with it. In order to remove the need for pm_runtime_irq_safe(), let's gate the clock directly in the driver. This removes the need to call PM runtime during idle, and allows us to switch to using CPU_PM in the following patch. Note that the smartreflex interconnect target module is configured for smart idle, but the clock does not have autoidle capability, and needs to be gated manually. If the clock supported autoidle, we would not need to even gate the clock. With this change, we can now remove the related quirk flags for ti-sysc also. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2021-08-09Merge 5.14-rc5 into driver-core-nextGreg Kroah-Hartman3-11/+22
We need the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-09Merge 5.14-rc5 into char-misc-nextGreg Kroah-Hartman1-7/+15
We need the fixes in here as well, and resolves some merge issues with the mhi codebase. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-06Merge tag 'soc-fixes-5.14-2' of ↵Linus Torvalds1-7/+15
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Lots of small fixes for Arm SoCs this time, nothing too worrying: - omap/beaglebone boot regression fix in gpt12 timer - revert for i.mx8 soc driver breaking as a platform_driver - kexec/kdump fixes for op-tee - various fixes for incorrect DT settings on imx, mvebu, omap, stm32, and tegra causing problems. - device tree fixes for static checks in nomadik, versatile, stm32 - code fixes for issues found in build testing and with static checking on tegra, ixp4xx, imx, omap" * tag 'soc-fixes-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits) soc: ixp4xx/qmgr: fix invalid __iomem access soc: ixp4xx: fix printing resources ARM: ixp4xx: goramo_mlr depends on old PCI driver ARM: ixp4xx: fix compile-testing soc drivers soc/tegra: Make regulator couplers depend on CONFIG_REGULATOR ARM: dts: nomadik: Fix up interrupt controller node names ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM ARM: dts: stm32: Prefer HW RTC on DHCOM SoM omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator ARM: dts: am437x-l4: fix typo in can@0 node ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218 bus: ti-sysc: AM3: RNG is GP only ARM: omap2+: hwmod: fix potential NULL pointer access arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz arm64: dts: ls1028: sl28: fix networking for variant 2 ...
2021-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-4/+7
Build failure in drivers/net/wwan/mhi_wwan_mbim.c: add missing parameter (0, assuming we don't want buffer pre-alloc). Conflict in drivers/net/dsa/sja1105/sja1105_main.c between: 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") Follow the instructions from the commit message of the former commit - removed the if conditions. When looking at commit 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") note that the mask_iotag fields get removed by the following patch. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-05bus: mhi: core: Improve debug messages for power upBhaumik Bhatt1-1/+5
Improve error message to be more descriptive if a failure occurs with an invalid power up execution environment. Additionally, add a debug log to print the execution environment and MHI state before a power up is attempted to confirm if the device is in an expected state. This helps clarify reasons for power up failures such as the device being found in a PBL or Emergency Download Mode execution environment and the host expected a full power up with Pass-Through and no image loading involved. Link: https://lore.kernel.org/r/1620072038-36160-1-git-send-email-bbhatt@codeaurora.org Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-11-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05bus: mhi: core: Replace DMA allocation wrappers with original APIsBhaumik Bhatt4-47/+28
There is nothing special done within the mhi_alloc_coherent() and the mhi_free_coherent() wrapper functions. They only directly call the equivalent DMA allocation functions. Replace them with the original function calls such that the implementation is clear and direct. Link: https://lore.kernel.org/r/1624392428-9328-1-git-send-email-bbhatt@codeaurora.org Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-10-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05bus: mhi: core: Add range checks for BHI and BHIeBhaumik Bhatt1-1/+17
When obtaining the BHI or BHIe offsets during the power up preparation phase, range checks are missing. These can help controller drivers avoid accessing any address outside of the MMIO region. Ensure that mhi_cntrl->reg_len is set before MHI registration as it is a required field and range checks will fail without it. Link: https://lore.kernel.org/r/1620330705-40192-7-git-send-email-bbhatt@codeaurora.org Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-9-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05bus: mhi: pci_generic: Set register access length for MHI driverBhaumik Bhatt1-0/+1
MHI driver requires register space length to add range checks and prevent memory region accesses outside of that for MMIO space. Set it from the PCI generic controller driver before registering the MHI controller. Link: https://lore.kernel.org/r/1620330705-40192-6-git-send-email-bbhatt@codeaurora.org Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-8-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05bus: mhi: core: Set BHI and BHIe pointers to NULL in clean-upBhaumik Bhatt1-0/+3
Set the BHI and BHIe pointers to NULL as part of clean-up. This makes sure that stale pointers are not accessed after powering MHI down. Link: https://lore.kernel.org/r/1620330705-40192-3-git-send-email-bbhatt@codeaurora.org Suggested-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-5-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05bus: mhi: core: Set BHI/BHIe offsets on power up preparationBhaumik Bhatt2-43/+27
Set the BHI and/or BHIe offsets in mhi_prepare_for_power_up(), rearrange the function, and remove the equivalent from mhi_async_power_up(). This helps consolidate multiple checks in different parts of the driver and can help MHI fail early on before power up begins if the offsets are not read correctly. Link: https://lore.kernel.org/r/1620330705-40192-2-git-send-email-bbhatt@codeaurora.org Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>