summaryrefslogtreecommitdiff
path: root/drivers/char/tpm/tpm1-cmd.c
AgeCommit message (Collapse)AuthorFilesLines
2022-08-03tpm: Add upgrade/reduced mode support for TPM1.2 modulesStefan Mahnke-Hartmann1-1/+6
In case a TPM in failure mode is detected, the TPM should be accessible through a transparent communication channel for analysing purposes (e.g. TPM_GetTestResult) or a field upgrade. Since a TPM in failure mode has similar reduced functionality as in field upgrade mode, the flag TPM_CHIP_FLAG_FIRMWARE_UPGRADE is also valid. As described in TCG TPM Main Part1 Design Principles, Revision 116, chapter 9.2.1. the TPM also allows an update function in case a TPM is in failure mode. If the TPM in failure mode is detected, the function tpm1_auto_startup() sets TPM_CHIP_FLAG_FIRMWARE_UPGRADE flag, which is used later during driver initialization/deinitialization to disable functionality which makes no sense or will fail in the current TPM state. The following functionality is affected: * Do not register TPM as a hwrng * Do not get pcr allocation * Do not register sysfs entries which provide information impossible to obtain in limited mode Signed-off-by: Stefan Mahnke-Hartmann <stefan.mahnke-hartmann@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-06-23tpm: fix some doc warnings in tpm1-cmd.cYang Yingliang1-2/+2
Fix the following make W=1 warnings: drivers/char/tpm/tpm1-cmd.c:325: warning: expecting prototype for tpm_startup(). Prototype was for tpm1_startup() instead drivers/char/tpm/tpm1-cmd.c:621: warning: expecting prototype for tpm_continue_selftest(). Prototype was for tpm1_continue_selftest() instead Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2019-11-12tpm: provide a way to override the chip returned durationsJerry Snitselaar1-0/+15
Patch adds method ->update_durations to override returned durations in case TPM chip misbehaves for TPM 1.2 drivers. Cc: Peter Huewe <peterhuewe@gmx.de> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Alexey Klimov <aklimov@redhat.com> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> (!update_durations path) Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-08-05tpm: tpm_ibm_vtpm: Fix unallocated banksNayna Jain1-12/+24
The nr_allocated_banks and allocated banks are initialized as part of tpm_chip_register. Currently, this is done as part of auto startup function. However, some drivers, like the ibm vtpm driver, do not run auto startup during initialization. This results in uninitialized memory issue and causes a kernel panic during boot. This patch moves the pcr allocation outside the auto startup function into tpm_chip_register. This ensures that allocated banks are initialized in any case. Fixes: 879b589210a9 ("tpm: retrieve digest size of unknown algorithms with PCR read") Reported-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Tested-by: Michal Suchánek <msuchanek@suse.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-06-24tpm: Actually fail on TPM errors during "get random"Kees Cook1-2/+5
A "get random" may fail with a TPM error, but those codes were returned as-is to the caller, which assumed the result was the number of bytes that had been written to the target buffer, which could lead to a kernel heap memory exposure and over-read. This fixes tpm1_get_random() to mask positive TPM errors into -EIO, as before. [ 18.092103] tpm tpm0: A TPM error (379) occurred attempting get random [ 18.092106] usercopy: Kernel memory exposure attempt detected from SLUB object 'kmalloc-64' (offset 0, size 379)! Link: https://bugzilla.redhat.com/show_bug.cgi?id=1650989 Reported-by: Phil Baker <baker1tex@gmail.com> Reported-by: Craig Robson <craig@zhatt.com> Fixes: 7aee9c52d7ac ("tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structure") Cc: Laura Abbott <labbott@redhat.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Bartosz Szczepanek <bsz@semihalf.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-02-13tpm: retrieve digest size of unknown algorithms with PCR readRoberto Sassu1-1/+3
Currently, the TPM driver retrieves the digest size from a table mapping TPM algorithms identifiers to identifiers defined by the crypto subsystem. If the algorithm is not defined by the latter, the digest size can be retrieved from the output of the PCR read command. The patch modifies the definition of tpm_pcr_read() and tpm2_pcr_read() to pass the desired hash algorithm and obtain the digest size at TPM startup. Algorithms and corresponding digest sizes are stored in the new structure tpm_bank_info, member of tpm_chip, so that the information can be used by other kernel subsystems. tpm_bank_info contains: the TPM algorithm identifier, necessary to generate the event log as defined by Trusted Computing Group (TCG); the digest size, to pad/truncate a digest calculated with a different algorithm; the crypto subsystem identifier, to calculate the digest of event data. This patch also protects against data corruption that could happen in the bus, by checking that the digest size returned by the TPM during a PCR read matches the size of the algorithm passed to tpm2_pcr_read(). For the initial PCR read, when digest sizes are not yet available, this patch ensures that the amount of data copied from the output returned by the TPM does not exceed the size of the array data are copied to. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-02-13tpm: rename and export tpm2_digest and tpm2_algorithmsRoberto Sassu1-1/+1
Rename tpm2_* to tpm_* and move the definitions to include/linux/tpm.h so that these can be used by other kernel subsystems (e.g. IMA). Also, set the length of the digest array in tpm_digest to a new constant named TPM_MAX_DIGEST_SIZE, equal to SHA512_DIGEST_SIZE. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-02-13tpm: dynamically allocate the allocated_banks arrayRoberto Sassu1-0/+10
This patch renames active_banks (member of tpm_chip) to allocated_banks, stores the number of allocated PCR banks in nr_allocated_banks (new member of tpm_chip), and replaces the static array with a pointer to a dynamically allocated array. tpm2_get_pcr_allocation() determines if a PCR bank is allocated by checking the mask in the TPML_PCR_SELECTION structure returned by the TPM for TPM2_Get_Capability(). If a bank is not allocated, the TPM returns that bank in TPML_PCR_SELECTION, with all bits in the mask set to zero. In this case, the bank is not included in chip->allocated_banks, to avoid that TPM driver users unnecessarily calculate a digest for that bank. One PCR bank with algorithm set to SHA1 is always allocated for TPM 1.x. As a consequence of the introduction of nr_allocated_banks, tpm_pcr_extend() does not check anymore if the algorithm stored in tpm_chip is equal to zero. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-02-13tpm: remove @flags from tpm_transmit()Jarkko Sakkinen1-7/+7
Remove @flags from tpm_transmit() API. It is no longer used for anything. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
2019-02-13tpm: remove @space from tpm_transmit()Jarkko Sakkinen1-9/+7
Remove @space from tpm_transmit() API` in order to completely remove the bound between low-level transmission functionality and TPM spaces. The only real dependency existing is the amount of data saved before trying to send a command to the TPM. It doesn't really matter if we save always a bit more than needed so this commit changes the amount saved always to be the size of the TPM header and three handles. Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
2019-02-13tpm: use tpm_buf in tpm_transmit_cmd() as the IO parameterJarkko Sakkinen1-19/+7
Since we pass an initialized struct tpm_buf instance in every call site now, it is cleaner to pass that directly to the tpm_transmit_cmd() as the TPM command/response buffer. Fine-tune a little bit tpm_transmit() and tpm_transmit_cmd() comments while doing this. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
2019-02-13tpm: don't return bool from update_timeoutsJerry Snitselaar1-2/+1
Set tpm_chip->timeouts_adjusted directly in the update_timeouts code instead of returning bool. In case of tpm read failing print warning that the read failed and continue on. Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: use u32 instead of int for PCR indexTomas Winkler1-3/+3
The TPM specs defines PCR index as a positive number, and there is no reason to use a signed number. It is also a possible security issue as currently no functions check for a negative index, which may become a large number when converted to u32. Adjust the API to use u32 instead of int in all PCR related functions. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm1: reimplement tpm1_continue_selftest() using tpm_bufTomas Winkler1-11/+10
Reimplement tpm1_continue_selftest() using tpm_buf structure. This is the last command using the old tpm_cmd_t structure and now the structure can be removed. Cc: Nayna Jain <nayna@linux.vnet.ibm.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm1: reimplement SAVESTATE using tpm_bufTomas Winkler1-10/+12
In tpm1_pm_suspend() function reimplement, TPM_ORD_SAVESTATE comamnd using tpm_buf. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm1: rename tpm1_pcr_read_dev to tpm1_pcr_read()Tomas Winkler1-2/+2
Rename tpm1_pcr_read_dev to tpm1_pcr_read() to match the counterpart tpm2_pcr_read(). Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm1: implement tpm1_pcr_read_dev() using tpm_buf structureTomas Winkler1-17/+21
Implement tpm1_pcr_read_dev() using tpm_buf and remove now unneeded structures from tpm.h Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structureTomas Winkler1-36/+48
1. Use tpm_buf in tpm1_get_random() 2. Fix comment in tpm_get_random() so it is clear that the function is expected to return number of random bytes. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: factor out tpm_startup functionTomas Winkler1-1/+36
TPM manual startup is used only from within TPM 1.x or TPM 2.x code, hence remove tpm_startup() function from tpm-interface.c and add two static functions implementations tpm1_startup() and tpm2_startup() into to tpm1-cmd.c and tpm2-cmd.c respectively. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: factor out tpm 1.x pm suspend flow into tpm1-cmd.cTomas Winkler1-0/+61
Factor out TPM 1.x suspend flow from tpm-interface.c into a new function tpm1_pm_suspend() in tpm1-cmd.c Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: move tpm 1.x selftest code from tpm-interface.c tpm1-cmd.cTomas Winkler1-0/+142
Move the tpm1 selftest code functions to tpm1-cmd.c and adjust callers to use the new function names. 1. tpm_pcr_read_dev() to tpm1_pcr_read_dev(). 2. tpm_continue_selftest() to tpm1_continue_selftest(). 3. tpm_do_selftest() to tpm1_do_selftest() Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: factor out tpm1_get_random into tpm1-cmd.cTomas Winkler1-0/+55
Factor out get random implementation from tpm-interface.c into tpm1_get_random function in tpm1-cmd.c. No functional changes. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: move tpm_getcap to tpm1-cmd.cTomas Winkler1-8/+43
1. Move tpm_getcap to tpm1-cmd. Rename the function to tpm1_getcap. 2. Remove unused tpm_getcap_header with unused constant as this functionality is already implemented using tpm_buf construct. Fixes warning: drivers/char/tpm/tpm-interface.c:452:38: warning: ‘tpm_getcap_header’ defined but not used [-Wunused-const-variable=] static const struct tpm_input_header tpm_getcap_header = { ^~~~~~~~~~~~~~~~~ 3. Drop unused TPM_DIGEST_SIZE. It's already defined in include/linux/tpm.h Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: move tpm1_pcr_extend to tpm1-cmd.cTomas Winkler1-0/+21
Move tpm1_pcr_extend to tpm1-cmd.c and remove unused pcrextend_header structure and EXTEND_PCR_RESULT_SIZE and EXTEND_PCR_RESULT_BODY_SIZE defines. Fixes warning: drivers/char/tpm/tpm-interface.c:609:38: warning: ‘pcrextend_header’ defined but not used [-Wunused-const-variable=] static const struct tpm_input_header pcrextend_header = { ^~~~~~~~~~~~~~~~ Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Nayna Jain <nayna@linux.ibm.com> Tested-by: Nayna Jain <nayna@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: factor out tpm_get_timeouts()Tomas Winkler1-0/+106
Factor out tpm_get_timeouts() into tpm2_get_timeouts() and tpm1_get_timeouts() Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: add tpm_calc_ordinal_duration() wrapperTomas Winkler1-1/+0
Add convenient wrapper for ordinal duration computation to remove boiler plate if else statement over TPM2. if (chip->flags & TPM_CHIP_FLAG_TPM2) tpm2_calc_ordinal_duration(chip, ordinal); else tpm1_calc_ordinal_duration(chip, ordinal); Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: factor out tpm 1.x duration calculation to tpm1-cmd.cTomas Winkler1-0/+310
Factor out TPM 1.x commands calculation into tpm1-cmd.c file. and change the prefix from tpm_ to tpm1_. No functional change is done here. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-02 08:25:45 +0300