Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
|
|
'clk-rockchip' into clk-next
- Add Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
- Introduce kstrdup_and_replace() and use it
* clk-versa:
clk: vc7: Use i2c_get_match_data() instead of device_get_match_data()
clk: vc5: Use i2c_get_match_data() instead of device_get_match_data()
clk: versaclock3: Switch to use i2c_driver's probe callback
clk: Add support for versa3 clock driver
dt-bindings: clock: Add Renesas versa3 clock generator bindings
* clk-strdup:
clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace()
clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace()
driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace()
lib/string_helpers: Add kstrdup_and_replace() helper
* clk-amlogic: (22 commits)
dt-bindings: soc: amlogic: document System Control registers
dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema
dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema
clk: meson: axg-audio: move bindings include to main driver
clk: meson: meson8b: move bindings include to main driver
clk: meson: a1: move bindings include to main driver
clk: meson: eeclk: move bindings include to main driver
clk: meson: aoclk: move bindings include to main driver
dt-bindings: clk: axg-audio-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids
dt-bindings: clk: meson8b-clkc: expose all clock ids
dt-bindings: clk: g12a-aoclkc: expose all clock ids
dt-bindings: clk: g12a-clks: expose all clock ids
dt-bindings: clk: axg-clkc: expose all clock ids
dt-bindings: clk: gxbb-clkc: expose all clock ids
clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS
...
* clk-allwinner:
clk: sunxi-ng: nkm: Prefer current parent rate
clk: sunxi-ng: a64: select closest rate for pll-video0
clk: sunxi-ng: div: Support finding closest rate
clk: sunxi-ng: mux: Support finding closest rate
clk: sunxi-ng: nkm: Support finding closest rate
clk: sunxi-ng: nm: Support finding closest rate
clk: sunxi-ng: Add helper function to find closest rate
clk: sunxi-ng: Add feature to find closest rate
clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
clk: sunxi-ng: nkm: Use correct parameter name for parent HW
clk: sunxi-ng: Modify mismatched function name
clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource()
* clk-rockchip:
clk: rockchip: rv1126: Add PD_VO clock tree
clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
clk: rockchip: rk3568: Add PLL rate for 101MHz
|
|
Now the clock ids are no more defined in private headers,
cleanup and include the dt-bindings headers from the main
driver file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-19-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Now the clock ids are no more defined in private headers,
cleanup and include the dt-bindings headers from the main
driver file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-18-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Now the clock ids are no more defined in private headers,
cleanup and include the dt-bindings headers from the main
driver file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-17-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Now the clock ids are no more defined in private headers,
cleanup and include the dt-bindings headers from the main
driver file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-16-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Now the clock ids are no more defined in private headers,
cleanup and include the dt-bindings headers from the main
driver file.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-15-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Due to a policy change in clock ID bindings handling, expose
all the "private" clock IDs to the public clock dt-bindings
to move out of the previous maintenance scheme.
This refers to a discussion at [1] & [2] with Krzysztof about
the issue with the current maintenance.
It was decided to move every axg-audio-clkc ID to the public clock
dt-bindings headers to be merged in a single tree so we
can safely add new clocks without having merge issues.
[1] https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/
[2] https://lore.kernel.org/all/2fabe721-7434-43e7-bae5-088a42ba128d@app.fastmail.com/
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-14-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Due to a policy change in clock ID bindings handling, expose
all the "private" clock IDs to the public clock dt-bindings
to move out of the previous maintenance scheme.
This refers to a discussion at [1] & [2] with Krzysztof about
the issue with the current maintenance.
It was decided to move every A1 pll ID to the public clock
dt-bindings headers to be merged in a single tree so we
can safely add new clocks without having merge issues.
[1] https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/
[2] https://lore.kernel.org/all/2fabe721-7434-43e7-bae5-088a42ba128d@app.fastmail.com/
Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-13-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Due to a policy change in clock ID bindings handling, expose
all the "private" clock IDs to the public clock dt-bindings
to move out of the previous maintenance scheme.
This refers to a discussion at [1] & [2] with Krzysztof about
the issue with the current maintenance.
It was decided to move every A1 peripherals ID to the public clock
dt-bindings headers to be merged in a single tree so we
can safely add new clocks without having merge issues.
[1] https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/
[2] https://lore.kernel.org/all/2fabe721-7434-43e7-bae5-088a42ba128d@app.fastmail.com/
Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-12-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Due to a policy change in clock ID bindings handling, expose
all the "private" clock IDs to the public clock dt-bindings
to move out of the previous maintenance scheme.
This refers to a discussion at [1] & [2] with Krzysztof about
the issue with the current maintenance.
It was decided to move every meson8b-clkc ID to the public clock
dt-bindings headers to be merged in a single tree so we
can safely add new clocks without having merge issues.
[1] https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/
[2] https://lore.kernel.org/all/2fabe721-7434-43e7-bae5-088a42ba128d@app.fastmail.com/
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-11-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Due to a policy change in clock ID bindings handling, expose
all the "private" clock IDs to the public clock dt-bindings
to move out of the previous maintenance scheme.
This refers to a discussion at [1] & [2] with Krzysztof about
the issue with the current maintenance.
It was decided to move every g12a-aoclkc ID to the public clock
dt-bindings headers to be merged in a single tree so we
can safely add new clocks without having merge issues.
[1] https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/
[2] https://lore.kernel.org/all/2fabe721-7434-43e7-bae5-088a42ba128d@app.fastmail.com/
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-10-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Due to a policy change in clock ID bindings handling, expose
all the "private" clock IDs to the public clock dt-bindings
to move out of the previous maintenance scheme.
This refers to a discussion at [1] & [2] with Krzysztof about
the issue with the current maintenance.
It was decided to move every g12a-clkc ID to the public clock
dt-bindings headers to be merged in a single tree so we
can safely add new clocks without having merge issues.
[1] https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/
[2] https://lore.kernel.org/all/2fabe721-7434-43e7-bae5-088a42ba128d@app.fastmail.com/
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-9-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Due to a policy change in clock ID bindings handling, expose
all the "private" clock IDs to the public clock dt-bindings
to move out of the previous maintenance scheme.
This refers to a discussion at [1] & [2] with Krzysztof about
the issue with the current maintenance.
It was decided to move every axg-clkc ID to the public clock
dt-bindings headers to be merged in a single tree so we
can safely add new clocks without having merge issues.
[1] https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/
[2] https://lore.kernel.org/all/2fabe721-7434-43e7-bae5-088a42ba128d@app.fastmail.com/
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-8-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Due to a policy change in clock ID bindings handling, expose
all the "private" clock IDs to the public clock dt-bindings
to move out of the previous maintenance scheme.
This refers to a discussion at [1] & [2] with Krzysztof about
the issue with the current maintenance.
It was decided to move every gxbb-clkc ID to the public clock
dt-bindings headers to be merged in a single tree so we
can safely add new clocks without having merge issues.
[1] https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/
[2] https://lore.kernel.org/all/2fabe721-7434-43e7-bae5-088a42ba128d@app.fastmail.com/
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-7-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
The way hw_onecell_data is declared:
struct clk_hw_onecell_data {
unsigned int num;
struct clk_hw *hws[];
};
makes it impossible to have the clk_hw table declared outside while
using ARRAY_SIZE() to determine ".num" due to ".hws" being a flexible
array member.
Completely move out of hw_onecell_data and add a custom
devm_of_clk_add_hw_provider() "get" callback to retrieve the clk_hw
in order to finally get rid on the NR_CLKS define.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-6-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
The way hw_onecell_data is declared:
struct clk_hw_onecell_data {
unsigned int num;
struct clk_hw *hws[];
};
makes it impossible to have the clk_hw table declared outside while
using ARRAY_SIZE() to determine ".num" due to ".hws" being a flexible
array member.
Completely move out of hw_onecell_data and add a custom
devm_of_clk_add_hw_provider() "get" callback to retrieve the clk_hw
in order to finally get rid on the NR_CLKS define.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-5-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
The way hw_onecell_data is declared:
struct clk_hw_onecell_data {
unsigned int num;
struct clk_hw *hws[];
};
makes it impossible to have the clk_hw table declared outside while
using ARRAY_SIZE() to determine ".num" due to ".hws" being a flexible
array member.
Completely move out of hw_onecell_data and add a custom
devm_of_clk_add_hw_provider() "get" callback to retrieve the clk_hw
in order to finally get rid on the NR_CLKS define.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-4-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
The way hw_onecell_data is declared:
struct clk_hw_onecell_data {
unsigned int num;
struct clk_hw *hws[];
};
makes it impossible to have the clk_hw table declared outside while
using ARRAY_SIZE() to determine ".num" due to ".hws" being a flexible
array member.
Completely move out of hw_onecell_data and add a custom
devm_of_clk_add_hw_provider() "get" callback to retrieve the clk_hw
from the meson_aoclk_data struct to finally get rid on the
NR_CLKS define.
[jbrunet: Fixed whitespace checkpatch warning]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-3-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
The way hw_onecell_data is declared:
struct clk_hw_onecell_data {
unsigned int num;
struct clk_hw *hws[];
};
makes it impossible to have the clk_hw table declared outside while
using ARRAY_SIZE() to determine ".num" due to ".hws" being a flexible
array member.
Completely move out of hw_onecell_data and add a custom
devm_of_clk_add_hw_provider() "get" callback to retrieve the clk_hw
from the meson_eeclkc_data struct to finally get rid on the
NR_CLKS define.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-2-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Let's introduce a new module called meson-clkc-utils that
will contain shared utility functions for all Amlogic clock
controller drivers.
The first utility function is a replacement of of_clk_hw_onecell_get
in order to get rid of the NR_CLKS define in all Amlogic clock
drivers.
The goal is to move all duplicate probe and init code in this module.
[jbrunet: Fixed MODULE_LICENCE checkpatch warning]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230607-topic-amlogic-upstream-clkid-public-migration-v2-1-38172d17c27a@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # samsung
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # versaclock5
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718143156.1066339-1-robh@kernel.org
Acked-by: Abel Vesa <abel.vesa@linaro.org> #imx
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The function meson_clk_pll_enable() can be invoked under the enable_lock
spinlock from the clk core logic, which risks a kernel panic during the
usleep_range() call:
BUG: scheduling while atomic: kworker/u4:2/36/0x00000002
Modules linked in: g_ffs usb_f_fs libcomposite
CPU: 1 PID: 36 Comm: kworker/u4:2 Not tainted 6.4.0-rc5 #273
Workqueue: events_unbound async_run_entry_fn
Call trace:
dump_backtrace+0x9c/0x128
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x28
__schedule_bug+0x58/0x78
__schedule+0x828/0xa88
schedule+0x64/0xd8
schedule_hrtimeout_range_clock+0xd0/0x208
schedule_hrtimeout_range+0x1c/0x30
usleep_range_state+0x6c/0xa8
meson_clk_pll_enable+0x1f4/0x310
clk_core_enable+0x78/0x200
clk_core_enable+0x58/0x200
clk_core_enable+0x58/0x200
clk_core_enable+0x58/0x200
clk_enable+0x34/0x60
So it is required to use the udelay() function instead of usleep_range()
for the atomic context safety.
Fixes: b6ec400aa153 ("clk: meson: introduce new pll power-on sequence for A1 SoC family")
Reported-by: Jan Dakinevich <yvdakinevich@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Link: https://lore.kernel.org/r/20230704215404.11533-1-ddrokosov@sberdevices.ru
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
No functional modification involved.
./drivers/clk/meson/clk-pll.c:373:2-3: Unneeded semicolon.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230614084808.98819-1-jiapeng.chong@linux.alibaba.com
Fixes: b6ec400aa153 ("clk: meson: introduce new pll power-on sequence for A1 SoC family")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Sparse rightly complains that this symbol is supposed to be static.
Cc: Jian Hu <jian.hu@amlogic.com>
Cc: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Fixes: 84af914404db ("clk: meson: a1: add Amlogic A1 Peripherals clock controller driver")
Link: https://lore.kernel.org/r/20230612182332.371003-1-sboyd@kernel.org
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Introduce Peripherals clock controller for Amlogic A1 SoC family.
A1 SoC has four clock controllers on the board: PLL, Peripherals, CPU,
and Audio.
This patchset adds support for Amlogic A1 Peripherals clock driver and
allows to generate clocks for all A1 SoC peripheral IPs.
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230523135351.19133-7-ddrokosov@sberdevices.ru
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Introduce PLL clock controller for Amlogic A1 SoC family.
The clock unit is an APB slave module that is designed for generating all
of the internal and system clocks.
The SoC uses an external 24MHz crystal; there are 4 internal PLLs:
SYS_PLL/HIFI_PLL/USB_PLL/(FIXPLL), these PLLs generate 27 clock sources.
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230523135351.19133-5-ddrokosov@sberdevices.ru
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Modern meson PLL IPs are a little bit different from early known PLLs.
The main difference is located in the init/enable/disable sequences; the
rate logic is the same.
In A1 PLL, the PLL enable sequence is different, so add new optional pll
reg bits and use the new power-on sequence to enable the PLL:
1. enable the pll, delay for 10us
2. enable the pll self-adaption current module, delay for 40us
3. enable the lock detect module
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Link: https://lore.kernel.org/r/20230523135351.19133-3-ddrokosov@sberdevices.ru
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Compared with the previous SoCs, self-adaption current module
is newly added for A1, and there is no reset parameter except the
fixed pll. Since we use clk-pll generic driver for A1 pll
implementation, rst bit should be optional to support new behavior.
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Link: https://lore.kernel.org/r/20230523135351.19133-2-ddrokosov@sberdevices.ru
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
clk_ops.round_rate will be removed at some point. It's replacement is
.determine_rate. Switch clk-cpu-dyndiv over to use .determine_rate.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20221225212632.2760126-5-martin.blumenstingl@googlemail.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
clk_ops.round_rate will be removed at some point. It's replacement is
.determine_rate. Switch sclk-div over to use .determine_rate.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20221225212632.2760126-4-martin.blumenstingl@googlemail.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
clk_ops.round_rate will be removed at some point. It's replacement is
.determine_rate. Switch clk-dualdiv over to use .determine_rate.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20221225212632.2760126-3-martin.blumenstingl@googlemail.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
clk_ops.round_rate will be removed at some point. It's replacement is
.determine_rate. Switch clk-mpll over to use .determine_rate.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20221225212632.2760126-2-martin.blumenstingl@googlemail.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
and 'clk-ti' into clk-next
* clk-bindings:
dt-bindings: clock: ti,cdce925: Convert to DT schema
* clk-renesas: (26 commits)
clk: renesas: r8a779f0: Fix Ethernet Switch clocks
clk: renesas: r8a779g0: Add Z0 clock support
clk: renesas: r8a779g0: Add CMT clocks
clk: renesas: r8a779g0: Add TMU and SASYNCRT clocks
clk: renesas: r8a779f0: Fix SCIF parent clocks
clk: renesas: r8a779f0: Fix HSCIF parent clocks
clk: renesas: r9a06g032: Repair grave increment error
clk: renesas: rzg2l: Don't assume all CPG_MOD clocks support PM
clk: renesas: rzg2l: Fix typo in struct rzg2l_cpg_priv kerneldoc
clk: renesas: r8a779a0: Fix SD0H clock name
clk: renesas: r8a779g0: Add RPC-IF clock
clk: renesas: r8a779g0: Add SDHI clocks
clk: renesas: r8a779f0: Add SASYNCPER internal clock
clk: renesas: r8a779f0: Fix SD0H clock name
clk: renesas: r9a07g043: Drop WDT2 clock and reset entry
clk: renesas: r9a07g044: Drop WDT2 clock and reset entry
clk: renesas: r8a779g0: Add TPU clock
clk: renesas: r8a779g0: Add PWM clock
clk: renesas: r8a779g0: Add SCIF clocks
clk: renesas: r9a07g044: Add MTU3a clock and reset entry
...
* clk-amlogic:
clk: meson: pll: add pcie lock retry workaround
clk: meson: pll: adjust timeout in meson_clk_pll_wait_lock()
* clk-allwinner:
clk: sunxi-ng: f1c100s: Add IR mod clock
clk: sunxi-ng: v3s: Correct the header guard of ccu-sun8i-v3s.h
* clk-ti:
clk: ti: fix typo in ti_clk_retry_init() code comment
clk: ti: dra7-atl: don't allocate `parent_names' variable
clk: ti: change ti_clk_register[_omap_hw]() API
|
|
<linux/rational.h> is not needed for these drivers. Remove the
corresponding #include.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/12dd5cb49efa7714f8e0389e4c7b3bc829e8a90e.1668289299.git.christophe.jaillet@wanadoo.fr
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The PCIe PLL locking may be unreliable under some circumstance, such as
high or low temperature. If the PLL fails to lock, reset it a try again.
This helps on the S905X4
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[commit message amend]
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/cc80cda0-4dda-2e3e-3fc8-afa97717479b@gmail.com
|
|
Currently we loop over meson_parm_read() up to 24mln times.
This results in a unpredictable timeout period. In my case
it's over 5s on a S905X4-based system. Make the timeout
period predictable and set it to 100ms.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/a801afc0-a8f2-a0a4-0f2b-a7201351d563@gmail.com
|
|
We should hold the reference returned by of_get_parent() and use it
to call of_node_put() for refcount balance.
Fixes: 88e2da81241e ("clk: meson: aoclk: refactor common code into dedicated file")
Fixes: 6682bd4d443f ("clk: meson: factorise meson64 peripheral clock controller drivers")
Fixes: bb6eddd1d28c ("clk: meson: meson8b: use the HHI syscon if available")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220628141038.168383-1-windhl@126.com
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The clk API just got a function with a slightly different name and
the same functionality. Remove the duplication.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220520075737.758761-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
For spdx
Space instead of tab before spdx tag
Removed repeated works
the, to, two
Replacements
much much to a much
'to to' to 'to do'
aready to already
Comunications to Communications
freqency to frequency
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220222195153.3817625-1-trix@redhat.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
There are reports that 48kHz audio does not work on the WeTek Play 2
(which uses a GXBB SoC), while 44.1kHz audio works fine on the same
board. There are also reports of 48kHz audio working fine on GXL and
GXM SoCs, which are using an (almost) identical AIU (audio controller).
Experimenting has shown that MPLL0 is causing this problem. In the .dts
we have by default:
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
assigned-clock-rates = <294912000>,
<270950400>,
<393216000>;
The MPLL0 rate is divisible by 48kHz without remainder and the MPLL1
rate is divisible by 44.1kHz without remainder. Swapping these two clock
rates "fixes" 48kHz audio but breaks 44.1kHz audio.
Everything looks normal when looking at the info provided by the common
clock framework while playing 48kHz audio (via I2S with mclk-fs = 256):
mpll_prediv 1 1 0 2000000000
mpll0_div 1 1 0 294909641
mpll0 1 1 0 294909641
cts_amclk_sel 1 1 0 294909641
cts_amclk_div 1 1 0 12287902
cts_amclk 1 1 0 12287902
meson-clk-msr however shows that the actual MPLL0 clock is off by more
than 38MHz:
mp0_out 333322917 +/-10416Hz
The rate seen by meson-clk-msr is very close to what we would get when
SDM (the fractional part) was ignored:
(2000000000Hz * 16384) / ((16384 * 6) = 333.33MHz
If SDM was considered the we should get close to:
(2000000000Hz * 16384) / ((16384 * 6) + 12808) = 294.9MHz
Further experimenting shows that HHI_MPLL_CNTL7[15] does not have any
effect on the rate of MPLL0 as seen my meson-clk-msr (regardless of
whether that bit is zero or one the rate is always the same according to
meson-clk-msr). Using HHI_MPLL_CNTL[25] on the other hand as SDM_EN
results in SDM being considered for the rate output by the hardware. The
rate - as seen by meson-clk-msr - matches with what we expect when
SDM_EN is enabled (fractional part is being considered, resulting in a
294.9MHz output) or disable (fractional part being ignored, resulting in
a 333.33MHz output).
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20211031135006.1508796-1-martin.blumenstingl@googlemail.com
|
|
Switch from the "_ro" clock op variants to the mutable ones for all
video clocks. This will allow the VPU driver to change the clocks as
needed for the different video output modes.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210713232510.3057750-6-martin.blumenstingl@googlemail.com
|
|
Add the reg_sequence to initialize the HDMI PLL with the settings for
a video mode that doesn't require PLL internal clock doubling. These
settings are taken from the 3.10 vendor kernel's driver for the 2970MHz
PLL setting used for the 1080P video mode. This puts the PLL into a
defined state and the Linux kernel can take over.
While not all bits for this PLL are implemented using these "defaults"
and then applying M, N and FRAC seems to work fine.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210713232510.3057750-5-martin.blumenstingl@googlemail.com
|
|
The 3.10 vendor kernel uses only specific HDMI PLL M/N parameter
combinations. The PLL won't lock for values smaller than 50 if the
internal doubling (which is yet unknown how to use it) is disabled.
However, when this doubling is enabled then the values smaller than 50
will lock just fine. The only restriction for values greater than 50 is
that the resulting frequency must not exceed the 3.0GHz limit.
These values are taken from the endlessm 3.10 kernel which includes
additional M/N combinations for some VESA and 75Hz display modes.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210713232510.3057750-4-martin.blumenstingl@googlemail.com
|
|
HHI_VID_DIVIDER_CNTL[11] must be enabled for the video clock tree to
work. This bit is described as "LVDS_CLK_EN". It is not 100% clear where
this bit has to be placed in the hierarchy. But since the "LVDS_OUT" of
the HDMI PLL uses it's own set of registers it's more likely that this
"LVDS_CLK_EN" bit actually enables the input of the "hdmi_pll_lvds_out"
clock to the "vid_pll_in_sel" tree.
Add a gate definition for this bit (which will not be exported) so that
the kernel can manage all required bits to enable and disable the video
clocks.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210713232510.3057750-3-martin.blumenstingl@googlemail.com
|
|
Use CLK_SET_RATE_NO_REPARENT for the vclk{,2}_in_sel clocks. The only
parent which is actually used is vid_pll_final_div. This should be set
using assigned-clock-parents in the .dts rather than removing some
"unwanted" clock parents from the clock driver.
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210713232510.3057750-2-martin.blumenstingl@googlemail.com
|
|
Setting the video clocks requires fine-tuned adjustments of various
video clocks. Export the required ones to allow changing the video clock
for the CVBS and HDMI outputs at runtime.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210713232510.3057750-7-martin.blumenstingl@googlemail.com
|
|
This increases the maxmium supported frequency on 32-bit systems from
2^31 (signed long as used by clk_ops.round_rate, maximum value:
approx. 2.14GHz) to 2^32 (unsigned long as used by
clk_ops.determine_rate, maximum value: approx. 4.29GHz).
On Meson8/8b/8m2 the HDMI PLL and it's OD (post-dividers) are
capable of running at up to 2.97GHz. So switch the divider
implementation in clk-regmap to clk_ops.determine_rate to support these
higher frequencies on 32-bit systems.
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210627223959.188139-4-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This adds the Neural Network Accelerator source clocks for g12b.
Initial support for sm1 already exist in
commit 2f1efa5340ef
("clk: meson: g12a: Add support for NNA CLK source clocks")
The sm1 and g12b share the same NNA source clocks.
This patch add missing NNA clocks for A311D (g12b).
Signed-off-by: Nick Xie <nick@khadas.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210604032957.224496-1-xieqinick@gmail.com
|
|
Use dev_err_probe() for clock and reset resources to indicate the deferral
reason through sysfs when waiting for the resource to come up.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210520073136.272925-1-jbrunet@baylibre.com
|