summaryrefslogtreecommitdiff
path: root/drivers/clk/qcom
AgeCommit message (Collapse)AuthorFilesLines
2 daysclk: qcom: gcc-sm8550: Don't park the USB RCG at registration timeStephen Boyd3-1/+32
[ Upstream commit 7b6dfa1bbe7f727315d2e05a2fc8e4cfeb779156 ] Amit Pundir reports that audio and USB-C host mode stops working if the gcc_usb30_prim_master_clk_src clk is registered and clk_rcg2_shared_init() parks it on XO. Skip parking this clk at registration time to fix those issues. Partially revert commit 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration") by skipping the parking bit for this clk, but keep the part where we cache the config register. That's still necessary to figure out the true parent of the clk at registration time. Fixes: 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration") Fixes: 929c75d57566 ("clk: qcom: gcc-sm8550: Mark RCGs shared where applicable") Cc: Konrad Dybcio <konradybcio@kernel.org> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Taniya Das <quic_tdas@quicinc.com> Reported-by: Amit Pundir <amit.pundir@linaro.org> Closes: https://lore.kernel.org/CAMi1Hd1KQBE4kKUdAn8E5FV+BiKzuv+8FoyWQrrTHPDoYTuhgA@mail.gmail.com Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20240819233628.2074654-3-swboyd@chromium.org Tested-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2 daysclk: qcom: gcc-sm8550: Don't use parking clk_ops for QUPsStephen Boyd1-26/+26
[ Upstream commit d10eeb75168b84ed9559c58efe2756c2e0bc052a ] The QUPs aren't shared in a way that requires parking the RCG at an always on parent in case some other entity turns on the clk. The hardware is capable of setting a new frequency itself with the DFS mode, so parking is unnecessary. Furthermore, there aren't any GDSCs for these devices, so there isn't a possibility of the GDSC turning on the clks for housekeeping purposes. This wasn't a problem to mark these clks shared until we started parking shared RCGs at clk registration time in commit 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration"). Parking at init is actually harmful to the UART when earlycon is used. If the device is pumping out data while the frequency changes you'll see garbage on the serial console until the driver can probe and actually set a proper frequency. Revert the QUP part of commit 929c75d57566 ("clk: qcom: gcc-sm8550: Mark RCGs shared where applicable") so that the QUPs don't get parked during clk registration and break UART operations. Fixes: 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration") Fixes: 929c75d57566 ("clk: qcom: gcc-sm8550: Mark RCGs shared where applicable") Cc: Konrad Dybcio <konradybcio@kernel.org> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Taniya Das <quic_tdas@quicinc.com> Reported-by: Amit Pundir <amit.pundir@linaro.org> Closes: https://lore.kernel.org/CAMi1Hd1KQBE4kKUdAn8E5FV+BiKzuv+8FoyWQrrTHPDoYTuhgA@mail.gmail.com Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20240819233628.2074654-2-swboyd@chromium.org Tested-by: Amit Pundir <amit.pundir@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2 daysclk: qcom: gcc-x1e80100: Don't use parking clk_ops for QUPsBryan O'Donoghue1-24/+24
[ Upstream commit ca082333b4356688be715ed9cc762fc5d3d5f4c5 ] Per Stephen Boyd's explanation in the link below, QUP RCG clocks do not need to be parked when switching frequency. A side-effect in parking to a lower frequency can be a momentary invalid clock driven on an in-use serial peripheral. This can cause "junk" to spewed out of a UART as a low-impact example. On the x1e80100-crd this serial port junk can be observed on linux-next. Apply a similar fix to the x1e80100 Global Clock controller to remediate. Link: https://lore.kernel.org/all/20240819233628.2074654-3-swboyd@chromium.org/ Fixes: 161b7c401f4b ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100") Fixes: 929c75d57566 ("clk: qcom: gcc-sm8550: Mark RCGs shared where applicable") Suggested-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20240823-x1e80100-clk-fix-v1-1-0b1b4f5a96e8@linaro.org Reviewed-by: Konrad Dybcio <konradybcio@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2 daysclk: qcom: ipq9574: Update the alpha PLL type for GPLLsdevi priya1-6/+6
[ Upstream commit 6357efe3abead68048729adf11a9363881657939 ] Update PLL offsets to DEFAULT_EVO to configure MDIO to 800MHz. The incorrect clock frequency leads to an incorrect MDIO clock. This, in turn, affects the MDIO hardware configurations as the divider is calculated from the MDIO clock frequency. If the clock frequency is not as expected, the MDIO register fails due to the generation of an incorrect MDIO frequency. This issue is critical as it results in incorrect MDIO configurations and ultimately leads to the MDIO function not working. This results in a complete feature failure affecting all Ethernet PHYs. Specifically, Ethernet will not work on IPQ9574 due to this issue. Currently, the clock frequency is set to CLK_ALPHA_PLL_TYPE_DEFAULT. However, this setting does not yield the expected clock frequency. To rectify this, we need to change this to CLK_ALPHA_PLL_TYPE_DEFAULT_EVO. This modification ensures that the clock frequency aligns with our expectations, thereby resolving the MDIO register failure and ensuring the proper functioning of the Ethernet on IPQ9574. Fixes: d75b82cff488 ("clk: qcom: Add Global Clock Controller driver for IPQ9574") Signed-off-by: devi priya <quic_devipriy@quicinc.com> Signed-off-by: Amandeep Singh <quic_amansing@quicinc.com> Link: https://lore.kernel.org/r/20240806061105.2849944-1-quic_amansing@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2 daysclk: qcom: gcc-x1e80100: Fix USB 0 and 1 PHY GDSC pwrsts flagsAbel Vesa1-2/+2
[ Upstream commit f4c16a7cdbd2edecdb854f2ce0ef07c6263c5379 ] Allowing these GDSCs to collapse makes the QMP combo PHYs lose their configuration on machine suspend. Currently, the QMP combo PHY driver doesn't reinitialise the HW on resume. Under such conditions, the USB SuperSpeed support is broken. To avoid this, mark the pwrsts flags with RET_ON. This is in line with USB 2 PHY GDSC config. Fixes: 161b7c401f4b ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100") Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240801-x1e80100-clk-gcc-fix-usb-phy-gdscs-pwrsts-v1-1-8df016768a0f@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2 daysclk: qcom: clk-alpha-pll: Fix the trion pll postdiv set rate APISatya Priya Kakitapalli1-2/+2
commit 4ad1ed6ef27cab94888bb3c740c14042d5c0dff2 upstream. Correct the pll postdiv shift used in clk_trion_pll_postdiv_set_rate API. The shift value is not same for different types of plls and should be taken from the pll's .post_div_shift member. Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs") Cc: stable@vger.kernel.org Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240731062916.2680823-3-quic_skakitap@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 daysclk: qcom: clk-alpha-pll: Fix the pll post div maskSatya Priya Kakitapalli1-1/+1
commit 2c4553e6c485a96b5d86989eb9654bf20e51e6dd upstream. The PLL_POST_DIV_MASK should be 0 to (width - 1) bits. Fix it. Fixes: 1c3541145cbf ("clk: qcom: support for 2 bit PLL post divider") Cc: stable@vger.kernel.org Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Link: https://lore.kernel.org/r/20240731062916.2680823-2-quic_skakitap@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03clk: qcom: Park shared RCGs upon registrationStephen Boyd1-0/+32
[ Upstream commit 01a0a6cc8cfd9952e72677d48d56cf6bc4e3a561 ] There's two problems with shared RCGs. The first problem is that they incorrectly report the parent after commit 703db1f5da1e ("clk: qcom: rcg2: Cache CFG register updates for parked RCGs"). That's because the cached CFG register value needs to be populated when the clk is registered. clk_rcg2_shared_enable() writes the cached CFG register value 'parked_cfg'. This value is initially zero due to static initializers. If a driver calls clk_enable() before setting a rate or parent, it will set the parent to '0' which is (almost?) always XO, and may not reflect the parent at registration. In the worst case, this switches the RCG from sourcing a fast PLL to the slow crystal speed. The second problem is that the force enable bit isn't cleared. The force enable bit is only used during parking and unparking of shared RCGs. Otherwise it shouldn't be set because it keeps the RCG enabled even when all the branches on the output of the RCG are disabled (the hardware has a feedback mechanism so that any child branches keep the RCG enabled when the branch enable bit is set). This problem wastes power if the clk is unused, and is harmful in the case that the clk framework disables the parent of the force enabled RCG. In the latter case, the GDSC the shared RCG is associated with will get wedged if the RCG's source clk is disabled and the GDSC tries to enable the RCG to do "housekeeping" while powering on. Both of these problems combined with incorrect runtime PM usage in the display driver lead to a black screen on Qualcomm sc7180 Trogdor chromebooks. What happens is that the bootloader leaves the 'disp_cc_mdss_rot_clk' enabled and the 'disp_cc_mdss_rot_clk_src' force enabled and parented to 'disp_cc_pll0'. The mdss driver probes and runtime suspends, disabling the mdss_gdsc which uses the 'disp_cc_mdss_rot_clk_src' for "housekeeping". The 'disp_cc_mdss_rot_clk' is disabled during late init because the clk is unused, but the parent 'disp_cc_mdss_rot_clk_src' is still force enabled because the force enable bit was never cleared. Then 'disp_cc_pll0' is disabled because it is also unused. That's because the clk framework believes the parent of the RCG is XO when it isn't. A child device of the mdss device (e.g. DSI) runtime resumes mdss which powers on the mdss_gdsc. This wedges the GDSC because 'disp_cc_mdss_rot_clk_src' is parented to 'disp_cc_pll0' and that PLL is off. With the GDSC wedged, mdss_runtime_resume() tries to enable 'disp_cc_mdss_mdp_clk' but it can't because the GDSC has wedged all the clks associated with the GDSC causing clks to stay stuck off. This leads to the following warning seen at boot and a black screen because the display driver fails to probe. disp_cc_mdss_mdp_clk status stuck at 'off' WARNING: CPU: 1 PID: 81 at drivers/clk/qcom/clk-branch.c:87 clk_branch_toggle+0x114/0x168 Modules linked in: CPU: 1 PID: 81 Comm: kworker/u16:4 Not tainted 6.7.0-g0dd3ee311255 #1 f5757d475795053fd2ad52247a070cd50dd046f2 Hardware name: Google Lazor (rev1 - 2) with LTE (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : clk_branch_toggle+0x114/0x168 lr : clk_branch_toggle+0x110/0x168 sp : ffffffc08084b670 pmr_save: 00000060 x29: ffffffc08084b680 x28: ffffff808006de00 x27: 0000000000000001 x26: ffffff8080dbd4f4 x25: 0000000000000000 x24: 0000000000000000 x23: 0000000000000000 x22: ffffffd838461198 x21: ffffffd838007997 x20: ffffffd837541d5c x19: 0000000000000001 x18: 0000000000000004 x17: 0000000000000000 x16: 0000000000000010 x15: ffffffd837070fac x14: 0000000000000003 x13: 0000000000000004 x12: 0000000000000001 x11: c0000000ffffdfff x10: ffffffd838347aa0 x9 : 08dadf92e516c000 x8 : 08dadf92e516c000 x7 : 0000000000000000 x6 : 0000000000000027 x5 : ffffffd8385a61f2 x4 : 0000000000000000 x3 : ffffffc08084b398 x2 : ffffffc08084b3a0 x1 : 00000000ffffdfff x0 : 00000000fffffff0 Call trace: clk_branch_toggle+0x114/0x168 clk_branch2_enable+0x24/0x30 clk_core_enable+0x5c/0x1c8 clk_enable+0x38/0x58 clk_bulk_enable+0x40/0xb0 mdss_runtime_resume+0x68/0x258 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x30/0x80 genpd_runtime_resume+0x124/0x214 __rpm_callback+0x7c/0x15c rpm_callback+0x30/0x88 rpm_resume+0x390/0x4d8 rpm_resume+0x43c/0x4d8 __pm_runtime_resume+0x54/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x48/0xa4 device_add+0x52c/0x6fc mipi_dsi_device_register_full+0x104/0x1a8 devm_mipi_dsi_device_register_full+0x28/0x78 ti_sn_bridge_probe+0x1dc/0x2bc auxiliary_bus_probe+0x4c/0x94 really_probe+0xf8/0x270 __driver_probe_device+0xa8/0x130 driver_probe_device+0x44/0x104 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x94/0xe8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x48/0xa4 deferred_probe_work_func+0x9c/0xd8 Fix these problems by parking shared RCGs at boot. This will properly initialize the parked_cfg struct member so that the parent is reported properly and ensure that the clk won't get stuck on or off because the RCG is parented to the safe source (XO). Fixes: 703db1f5da1e ("clk: qcom: rcg2: Cache CFG register updates for parked RCGs") Reported-by: Stephen Boyd <sboyd@kernel.org> Closes: https://lore.kernel.org/r/1290a5a0f7f584fcce722eeb2a1fd898.sboyd@kernel.org Closes: https://issuetracker.google.com/319956935 Reported-by: Laura Nao <laura.nao@collabora.com> Closes: https://lore.kernel.org/r/20231218091806.7155-1-laura.nao@collabora.com Cc: Bjorn Andersson <andersson@kernel.org> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20240502224703.103150-1-swboyd@chromium.org Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03clk: qcom: gcc-x1e80100: Set parent rate for USB3 sec and tert PHY pipe clksAbel Vesa1-0/+2
[ Upstream commit 14539c88972bd984f1f04c9e601c1a2835d3e5d2 ] Allow the USB3 second and third GCC PHY pipe clocks to propagate the rate to the pipe clocks provided by the QMP combo PHYs. The first instance is already doing that. Fixes: 161b7c401f4b ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100") Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240530-x1e80100-clk-gcc-usb3-sec-tert-set-parent-rate-v1-1-7b2b04cad545@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03clk: qcom: kpss-xcc: Return of_clk_add_hw_provider to transfer the errorChen Ni1-3/+1
[ Upstream commit 9db4585eca22fcd0422a94ac792f87dcbf74b643 ] Return of_clk_add_hw_provider() in order to transfer the error if it fails. Fixes: 09be1a39e685 ("clk: qcom: kpss-xcc: register it as clk provider") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240704073606.1976936-1-nichen@iscas.ac.cn Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03clk: qcom: gcc-x1e80100: Fix halt_check for all pipe clocksAbel Vesa1-22/+22
[ Upstream commit f27e42c7d3ff8ddfc57273efd1e8642ea89bad90 ] In case of all pipe clocks, there is a QMP PHY clock that is feeding them. If, for whatever reason, the clock from the PHY is not enabled, halt bit will not get set, and the clock controller driver will assume the clock is stuck in a specific state. The way this is supposed to be properly fixed is to defer the checking of the halt bit until after the PHY clock has been initialized, but doing so complicates the clock controller driver. In fact, since these pipe clocks are consumed by the PHY, while the PHY is also the one providing the source, if clock gets stuck, the PHY driver would be to blame. So instead of checking the halt bit in here, just skip it and assume the PHY driver is handling the source clock correctly. Fixes: 161b7c401f4b ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100") Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Taniya Das <quic_tdas@quicinc.com> Link: https://lore.kernel.org/r/20240628-x1e80100-clk-gcc-fix-halt-check-for-usb-phy-pipe-clks-v2-1-db3be54b1143@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03clk: qcom: gpucc-sa8775p: Update wait_val fields for GPU GDSC'sTaniya Das1-0/+6
[ Upstream commit 211681998d706d1e0fff6b62f89efcdf29c24978 ] Update wait_val fields as per the default hardware values of the GDSC as otherwise it would lead to GDSC FSM state stuck causing power on/off failures of the GSDC. Fixes: 0afa16afc36d ("clk: qcom: add the GPUCC driver for sa8775p") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-6-adcc756a23df@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03clk: qcom: gpucc-sa8775p: Park RCG's clk source at XO during disableTaniya Das1-4/+4
[ Upstream commit dff68b2f74547617dbb75d0d12f404877ec8f8ce ] The RCG's clk src has to be parked at XO while disabling as per the HW recommendation, hence use clk_rcg2_shared_ops to achieve the same. Also gpu_cc_cb_clk is recommended to be kept always ON, hence use clk_branch2_aon_ops to keep the clock always ON. Fixes: 0afa16afc36d ("clk: qcom: add the GPUCC driver for sa8775p") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-5-adcc756a23df@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03clk: qcom: gpucc-sa8775p: Remove the CLK_IS_CRITICAL and ALWAYS_ON flagsTaniya Das1-16/+11
[ Upstream commit e69386d4a42afa5da6bfdcd4ac5ec61e1db04c61 ] The GPU clocks/GDSCs have been marked critical from the clock driver but the GPU driver votes on these resources as per the HW requirement. In the case where these clocks & GDSCs are left enabled, would have power impact and also cause GPU stability/corruptions. Fix the same by removing the CLK_IS_CRITICAL for clocks and ALWAYS_ON flags for the GPU GDSCs. Fixes: 0afa16afc36d ("clk: qcom: add the GPUCC driver for sa8775p") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-4-adcc756a23df@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03clk: qcom: gcc-sa8775p: Update the GDSC wait_val fields and flagsTaniya Das1-0/+40
[ Upstream commit be208c0ccf7d861fc6109ca06c1a773512739af9 ] Update the GDSC wait_val fields as per the default hardware values as otherwise they would lead to GDSC FSM state to be stuck and causing failures to power on/off. Also add the GDSC flags as applicable and add support to control PCIE GDSC's using collapse vote registers. Fixes: 08c51ceb12f7 ("clk: qcom: add the GCC driver for sa8775p") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-2-adcc756a23df@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03clk: qcom: gpucc-sm8350: Park RCG's clk source at XO during disableTaniya Das1-2/+3
[ Upstream commit 313e2909023bef36ef7b6d1d9ff2d98febcaa28d ] The RCG's clk src has to be parked at XO while disabling as per the HW recommendation, hence use clk_rcg2_shared_ops to achieve the same. Fixes: 160758b05ab1 ("clk: qcom: add support for SM8350 GPUCC") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK Link: https://lore.kernel.org/r/20240621-sm8350-gpucc-fixes-v1-1-22db60c7c5d3@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03clk: qcom: camcc-sc7280: Add parent dependency to all camera GDSCsTaniya Das1-0/+5
[ Upstream commit 63aec3e4d987fd43237f557460345bca3b51e530 ] Camera titan top GDSC is a parent supply to all other camera GDSCs. Titan top GDSC is required to be enabled before enabling any other camera GDSCs and it should be disabled only after all other camera GDSCs are disabled. Ensure this behavior by marking titan top GDSC as parent of all other camera GDSCs. Fixes: 1daec8cfebc2 ("clk: qcom: camcc: Add camera clock controller driver for SC7280") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240531095142.9688-4-quic_tdas@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03clk: qcom: gcc-sc7280: Update force mem core bit for UFS ICE clockTaniya Das1-0/+3
[ Upstream commit f38467b5a920be1473710428a93c4e54b6f8a0c1 ] Update the force mem core bit for UFS ICE clock to force the core on signal to remain active during halt state of the clk. When retention bit of the clock is set the memories of the subsystem will retain the logic across power states. Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240531095142.9688-3-quic_tdas@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-29clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flagMd Sadre Alam1-4/+6
The crypto_ahb and crypto_axi clks are hardware voteable. This means that the halt bit isn't reliable because some other voter in the system, e.g. TrustZone, could be keeping the clk enabled when the kernel turns it off from clk_disable(). Make these clks use voting mode by changing the halt check to BRANCH_HALT_VOTED and toggle the voting bit in the voting register instead of directly controlling the branch by writing to the branch register. This fixes stuck clk warnings seen on ipq9574 and saves power by actually turning the clk off. Also changes the CRYPTO_AHB_CLK_ENA & CRYPTO_AXI_CLK_ENA offset to 0xb004 from 0x16014. Cc: stable@vger.kernel.org Fixes: f6b2bd9cb29a ("clk: qcom: gcc-ipq9574: Enable crypto clocks") Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com> Link: https://lore.kernel.org/r/20240509105405.1262369-1-quic_mdalam@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-29clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configsGabor Juhos1-2/+0
Since the CONFIG_CTL register is only 32 bits wide in the Stromer and Stromer Plus PLLs , the 'config_ctl_hi_val' values from the IPQ5018 and IPQ5332 configurations are not used so remove those. No functional changes. Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240509-stromer-config-ctl-v1-1-6034e17b28d5@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-29clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLsGabor Juhos1-0/+3
The clk_alpha_pll_stromer_plus_set_rate() function does not sets the ALPHA_EN bit in the USER_CTL register, so setting rates which requires using alpha mode works only if the bit gets set already prior calling the function. Extend the function to set the ALPHA_EN bit in order to allow using fractional rates regardless whether the bit gets set previously or not. Fixes: 84da48921a97 ("clk: qcom: clk-alpha-pll: introduce stromer plus ops") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240508-stromer-plus-alpha-en-v1-1-6639ce01ca5b@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-29clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parentsLuca Weiss1-5/+5
Both gpll6 and gpll7 are parented to CXO at 19.2 MHz and not to GPLL0 which runs at 600 MHz. Also gpll6_out_even should have the parent gpll6 and not gpll0. Adjust the parents of these clocks to make Linux report the correct rate and not absurd numbers like gpll7 at ~25 GHz or gpll6 at 24 GHz. Corrected rates are the following: gpll7 807999902 Hz gpll6 768000000 Hz gpll6_out_even 384000000 Hz gpll0 600000000 Hz gpll0_out_odd 200000000 Hz gpll0_out_even 300000000 Hz And because gpll6 is the parent of gcc_sdcc2_apps_clk_src (at 202 MHz) that clock also reports the correct rate now and avoids this warning: [ 5.984062] mmc0: Card appears overclocked; req 202000000 Hz, actual 6312499237 Hz Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20240508-sm6350-gpll-fix-v1-1-e4ea34284a6d@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-18Merge tag 'clk-for-linus' of ↵Linus Torvalds20-222/+376
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "I'm actually surprised this time. There aren't any new Qualcomm SoC clk drivers. And there's zero diff in the core clk framework. Instead we have new clk drivers for STM and Sophgo, with Samsung^WGoogle in third for the diffstat because they introduced HSI0 and HSI2 clk drivers for Google's GS101 SoC (high speed interface things like PCIe, UFS, and MMC). Beyond those big diffs there's the usual updates to various clk drivers for incorrect parent descriptions or mising MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super interesting here. New Drivers: - STM32MP257 SoC clk driver - Airoha EN7581 SoC clk driver - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver - Loongson-2k0500 and Loongson-2k2000 SoC clk driver - Add HSI0 and HSI2 clock controllers for Google GS101 - Add i.MX95 BLK CTL clock driver Updates: - Allocate clk_ops dynamically for SCMI clk driver - Add support in qcom RCG and RCG2 for multiple configurations for the same frequency - Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve issues - Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some boards - Cleanups and fixes for Qualcomm Stromer PLLs - Reduce max CPU frequency on Qualcomm APSS IPQ5018 - Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera clk drivers - Make Qualcomm MSM8998 Venus clocks functional - Cleanup downstream remnants related to DisplayPort across Qualcomm SM8450, SM6350, SM8550, and SM8650 - Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL - Use a specific Qualcomm QCS404 compatible for the otherwise generic HFPLL - Remove Qualcomm SM8150 CPUSS AHB clk as it is unused - Remove an unused field in the Qualcomm RPM clk driver - Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953 global clock controller drivers - Allow choice of manual or firmware-driven control over PLLs, needed to fully implement CPU clock controllers on Exynos850 - Correct PLL clock IDs on ExynosAutov9 - Propagate certain clock rates to allow setting proper SPI clock rates on Google GS101 - Mark certain Google GS101 clocks critical - Convert old S3C64xx clock controller bindings to DT schema - Add new PLL rate and missing mux on Rockchip rk3568 - Add missing reset line on Rockchip rk3588 - Removal of an unused field in struct rockchip_mmc_clock - Amlogic s4/a1: add regmap maximum register for proper debugfs dump - Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers - Amlogic pll driver: print clock name on lock error to help debug - Amlogic vclk: finish dsi clock path support - Amlogic license: fix occurence "GPL v2" as reported by checkpatch - Add PM runtime support to i.MX8MP Audiomix - Add DT schema for i.MX95 Display Master Block Control - Convert to platform remove callback returning void for i.MX8MP Audiomix - Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas R-Car V4M - Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five - Prepare power domain support for Renesas RZ/G2L family members, and add actual support on Renesas RZ/G3S SoC - Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas R-Car V4M - Add additional constraints to Allwinner A64 PLL MIPI clock - Fix autoloading sunxi-ng clocks when build as a module" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits) clk: samsung: Don't register clkdev lookup for the fixed rate clocks clk, reset: microchip: mpfs: fix incorrect preprocessor conditions clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018 clk: qcom: Fix SM_GPUCC_8650 dependencies clk: qcom: Fix SC_CAMCC_8280XP dependencies dt-bindings: clocks: stm32mp25: add access-controllers description clock, reset: microchip: move all mpfs reset code to the reset subsystem clk: samsung: gs101: drop unused HSI2 clock parent data clk: rockchip: rk3568: Add PLL rate for 724 MHz clk: rockchip: Remove an unused field in struct rockchip_mmc_clock dt-bindings: clock: fixed: Define a preferred node name clk: meson: s4: fix module autoloading clk: samsung: gs101: mark some apm UASC and XIU clocks critical clk: imx: imx8mp: Convert to platform remove callback returning void clk: imx: imx8mp: Switch to RUNTIME_PM_OPS() clk: bcm: rpi: Assign ->num before accessing ->hws clk: bcm: dvp: Assign ->num before accessing ->hws clk: samsung: gs101: add support for cmu_hsi2 clk: samsung: gs101: add support for cmu_hsi0 ...
2024-05-08clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLsGabor Juhos1-0/+2
The clk_alpha_pll_stromer_set_rate() function writes inproper values into the ALPHA_VAL{,_U} registers which results in wrong clock rates when the alpha value is used. The broken behaviour can be seen on IPQ5018 for example, when dynamic scaling sets the CPU frequency to 800000 KHz. In this case the CPU cores are running only at 792031 KHz: # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq 800000 # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 792031 This happens because the function ignores the fact that the alpha value calculated by the alpha_pll_round_rate() function is only 32 bits wide which must be extended to 40 bits if it is used on a hardware which supports 40 bits wide values. Extend the clk_alpha_pll_stromer_set_rate() function to convert the alpha value to 40 bits before wrinting that into the registers in order to ensure that the hardware really uses the requested rate. After the change the CPU frequency is correct: # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq 800000 # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 800000 Cc: stable@vger.kernel.org Fixes: e47a4f55f240 ("clk: qcom: clk-alpha-pll: Add support for Stromer PLLs") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-alpha-pll-fix-stromer-set-rate-v3-1-1b79714c78bc@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-08clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018Gabor Juhos1-1/+2
According to ipq5018.dtsi, the maximum supported rate by the CPU is 1.008 GHz on the IPQ5018 platform, however the current configuration of the PLL results in 1.2 GHz rate. Change the 'L' value in the PLL configuration to limit the rate to 1.008 GHz. The downstream kernel also uses the same value [1]. Also add a comment to indicate the desired frequency. [1] https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4/drivers/clk/qcom/apss-ipq5018.c?ref_type=heads#L151 Fixes: 50492f929486 ("clk: qcom: apss-ipq-pll: add support for IPQ5018") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240326-fix-ipq5018-apss-pll-rate-v1-1-82ab31c9da7e@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-08clk: qcom: Fix SM_GPUCC_8650 dependenciesNathan Chancellor1-0/+1
CONFIG_SM_GCC_8650 depends on ARM64 but it is selected by CONFIG_SM_GPUCC_8650, which can be selected on ARM, resulting in a Kconfig warning. WARNING: unmet direct dependencies detected for SM_GCC_8650 Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n]) Selected by [y]: - SM_GPUCC_8650 [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] Add the same dependencies to CONFIG_SM_GPUCC_8650 to resolve the warning. Fixes: 8676fd4f3874 ("clk: qcom: add the SM8650 GPU Clock Controller driver") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240318-fix-some-qcom-kconfig-deps-v1-2-ea0773e3df5a@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-08clk: qcom: Fix SC_CAMCC_8280XP dependenciesNathan Chancellor1-0/+1
CONFIG_SC_GCC_8280XP depends on ARM64 but it is selected by CONFIG_SC_CAMCC_8280XP, which can be selected on ARM, resulting in a Kconfig warning. WARNING: unmet direct dependencies detected for SC_GCC_8280XP Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n]) Selected by [y]: - SC_CAMCC_8280XP [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] Add the same dependencies to CONFIG_SC_CAMCC_8280XP to resolve the warning. Fixes: ff93872a9c61 ("clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240318-fix-some-qcom-kconfig-deps-v1-1-ea0773e3df5a@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: mmcc-msm8998: fix venus clock issueMarc Gonzalez1-0/+8
Right now, msm8998 video decoder (venus) is non-functional: $ time mpv --hwdec=v4l2m2m-copy --vd-lavc-software-fallback=no --vo=null --no-audio --untimed --length=30 --quiet demo-480.webm (+) Video --vid=1 (*) (vp9 854x480 29.970fps) Audio --aid=1 --alang=eng (*) (opus 2ch 48000Hz) [ffmpeg/video] vp9_v4l2m2m: output VIDIOC_REQBUFS failed: Connection timed out [ffmpeg/video] vp9_v4l2m2m: no v4l2 output context's buffers [ffmpeg/video] vp9_v4l2m2m: can't configure decoder Could not open codec. Software decoding fallback is disabled. Exiting... (Quit) Bryan O'Donoghue suggested the proper fix: - Set required register offsets in venus GDSC structs. - Set HW_CTRL flag. $ time mpv --hwdec=v4l2m2m-copy --vd-lavc-software-fallback=no --vo=null --no-audio --untimed --length=30 --quiet demo-480.webm (+) Video --vid=1 (*) (vp9 854x480 29.970fps) Audio --aid=1 --alang=eng (*) (opus 2ch 48000Hz) [ffmpeg/video] vp9_v4l2m2m: VIDIOC_G_FMT ioctl [ffmpeg/video] vp9_v4l2m2m: VIDIOC_G_FMT ioctl ... Using hardware decoding (v4l2m2m-copy). VO: [null] 854x480 nv12 Exiting... (End of file) real 0m3.315s user 0m1.277s sys 0m0.453s NOTES: GDSC = Globally Distributed Switch Controller Use same code as mmcc-msm8996 with: s/venus_gdsc/video_top_gdsc/ s/venus_core0_gdsc/video_subcore0_gdsc/ s/venus_core1_gdsc/video_subcore1_gdsc/ https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/caf_migration/kernel.lnx.4.4.r38-rel/include/dt-bindings/clock/msm-clocks-hwio-8996.h https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/caf_migration/kernel.lnx.4.4.r38-rel/include/dt-bindings/clock/msm-clocks-hwio-8998.h 0x1024 = MMSS_VIDEO GDSCR (undocumented) 0x1028 = MMSS_VIDEO_CORE_CBCR 0x1030 = MMSS_VIDEO_AHB_CBCR 0x1034 = MMSS_VIDEO_AXI_CBCR 0x1038 = MMSS_VIDEO_MAXI_CBCR 0x1040 = MMSS_VIDEO_SUBCORE0 GDSCR (undocumented) 0x1044 = MMSS_VIDEO_SUBCORE1 GDSCR (undocumented) 0x1048 = MMSS_VIDEO_SUBCORE0_CBCR 0x104c = MMSS_VIDEO_SUBCORE1_CBCR Fixes: d14b15b5931c2b ("clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver") Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/r/ff4e2e34-a677-4c39-8c29-83655c5512ae@freebox.fr Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: dispcc-sm8650: fix DisplayPort clocksDmitry Baryshkov1-16/+4
On SM8650 DisplayPort link clocks use frequency tables inherited from the vendor kernel, it is not applicable in the upstream kernel. Drop frequency tables and use clk_byte2_ops for those clocks. This fixes frequency selection in the OPP core (which otherwise attempts to use invalid 810 KHz as DP link rate), also fixing the following message: msm-dp-display af54000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22 Fixes: 9e939f008338 ("clk: qcom: add the SM8650 Display Clock Controller driver") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240424-dispcc-dp-clocks-v2-4-b44038f3fa96@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: dispcc-sm8550: fix DisplayPort clocksDmitry Baryshkov1-16/+4
On SM8550 DisplayPort link clocks use frequency tables inherited from the vendor kernel, it is not applicable in the upstream kernel. Drop frequency tables and use clk_byte2_ops for those clocks. This fixes frequency selection in the OPP core (which otherwise attempts to use invalid 810 KHz as DP link rate), also fixing the following message: msm-dp-display ae90000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22 Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240424-dispcc-dp-clocks-v2-3-b44038f3fa96@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: dispcc-sm6350: fix DisplayPort clocksDmitry Baryshkov1-10/+1
On SM6350 DisplayPort link clocks use frequency tables inherited from the vendor kernel, it is not applicable in the upstream kernel. Drop frequency tables and use clk_byte2_ops for those clocks. This fixes frequency selection in the OPP core (which otherwise attempts to use invalid 810 KHz as DP link rate), also fixing the following message: msm-dp-display ae90000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22 Fixes: 837519775f1d ("clk: qcom: Add display clock controller driver for SM6350") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240424-dispcc-dp-clocks-v2-2-b44038f3fa96@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: dispcc-sm8450: fix DisplayPort clocksDmitry Baryshkov1-16/+4
On SM8450 DisplayPort link clocks use frequency tables inherited from the vendor kernel, it is not applicable in the upstream kernel. Drop frequency tables and use clk_byte2_ops for those clocks. This fixes frequency selection in the OPP core (which otherwise attempts to use invalid 810 KHz as DP link rate), also fixing the following message: msm-dp-display ae90000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22 Fixes: 16fb89f92ec4 ("clk: qcom: Add support for Display Clock Controller on SM8450") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240424-dispcc-dp-clocks-v2-1-b44038f3fa96@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: clk-cbf-8996: use HUAYRA_APSS register map for cbf_pllGabor Juhos1-12/+1
The register map used for 'cbf_pll' is the same as the one defined for the CLK_ALPHA_PLL_TYPE_HUAYRA_APSS indice in the 'clk_alpha_pll_regs' array. Drop the local register map and use the global one instead to reduce code duplication. No functional changes intended. Compile tested only. Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-5-eddbf617f0c8@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: apss-ipq-pll: constify clk_init_data structuresGabor Juhos1-2/+2
The clk_init_data structures are never modified, so add const qualifier to the ones where it is missing. No functional changes. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-4-eddbf617f0c8@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: apss-ipq-pll: constify match data structuresGabor Juhos1-4/+4
The match data structures are used only by the apss_ipq_pll_probe() function and are never modified so mark those as constant. No functional changes. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-3-eddbf617f0c8@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: apss-ipq-pll: move Huayra register map to 'clk_alpha_pll_regs'Gabor Juhos3-19/+12
Move the locally defined Huayra register map to 'clk_alpha_pll_regs' in order to allow using that by other drivers, like the clk-cbf-8996. No functional changes. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-2-eddbf617f0c8@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: apss-ipq-pll: reuse Stromer reg offsets from 'clk_alpha_pll_regs'Gabor Juhos1-18/+6
The register offset array defined locally for the CLK_ALPHA_PLL_TYPE_STROMER_PLUS is the same as the entry defined for CLK_ALPHA_PLL_TYPE_STROMER in the 'clk_alpha_pll_regs' array. To avoid code duplication, remove the local definition and use the global one instead. No functional changes. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-1-eddbf617f0c8@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27Merge branch ↵Bjorn Andersson1-3/+27
'20240315-apss-ipq-pll-ipq5018-hang-v2-1-6fe30ada2009@gmail.com' into clk-for-6.10 Merge IPQ5018 boot failure fix from topic branch, in order to be able to add subsequent cleanup patches on top, for v6.10.
2024-04-27clk: qcom: apss-ipq-pll: use stromer ops for IPQ5018 to fix boot failureGabor Juhos1-3/+27
Booting v6.8 results in a hang on various IPQ5018 based boards. Investigating the problem showed that the hang happens when the clk_alpha_pll_stromer_plus_set_rate() function tries to write into the PLL_MODE register of the APSS PLL. Checking the downstream code revealed that it uses [1] stromer specific operations for IPQ5018, whereas in the current code the stromer plus specific operations are used. The ops in the 'ipq_pll_stromer_plus' clock definition can't be changed since that is needed for IPQ5332, so add a new alpha pll clock declaration which uses the correct stromer ops and use this new clock for IPQ5018 to avoid the boot failure. Also, change pll_type in 'ipq5018_pll_data' to CLK_ALPHA_PLL_TYPE_STROMER to better reflect that it is a Stromer PLL and change the apss_ipq_pll_probe() function accordingly. 1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4/drivers/clk/qcom/apss-ipq5018.c#L67 Cc: stable@vger.kernel.org Fixes: 50492f929486 ("clk: qcom: apss-ipq-pll: add support for IPQ5018") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Tested-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> Link: https://lore.kernel.org/r/20240315-apss-ipq-pll-ipq5018-hang-v2-1-6fe30ada2009@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple confChristian Marangi1-44/+76
Rework nss_port5/6 to use the new multiple configuration implementation and correctly fix the clocks for these port under some corner case. This is particularly relevant for device that have 2.5G or 10G port connected to port5 or port 6 on ipq8074. As the parent are shared across multiple port it may be required to select the correct configuration to accomplish the desired clock. Without this patch such port doesn't work in some specific ethernet speed as the clock will be set to the wrong frequency as we just select the first configuration for the related frequency instead of selecting the best one. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20231220221724.3822-4-ansuelsmth@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: clk-rcg2: add support for rcg2 freq multi opsChristian Marangi4-0/+187
Some RCG frequency can be reached by multiple configuration. Add clk_rcg2_fm_ops ops to support these special RCG configurations. These alternative ops will select the frequency using a CEIL policy. When the correct frequency is found, the correct config is selected by calculating the final rate (by checking the defined parent and values in the config that is being checked) and deciding based on the one that is less different than the requested one. These check are skipped if there is just one config for the requested freq. qcom_find_freq_multi is added to search the freq with the new struct freq_multi_tbl. __clk_rcg2_select_conf is used to select the correct conf by simulating the final clock. If a conf can't be found due to parent not reachable, a WARN is printed and -EINVAL is returned. Tested-by: Wei Lei <quic_leiwei@quicinc.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20231220221724.3822-3-ansuelsmth@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: clk-rcg: introduce support for multiple conf for same freqChristian Marangi1-1/+22
Some RCG frequency can be reached by multiple configuration. We currently declare multiple configuration for the same frequency but that is not supported and always the first configuration will be taken. These multiple configuration are needed as based on the current parent configuration, it may be needed to use a different configuration to reach the same frequency. To handle this introduce 3 new macro, C, FM and FMS: - C is used to declare a freq_conf where src, pre_div, m and n are provided. - FM is used to declare a freq_multi_tbl with the frequency and an array of confs to insert all the config for the provided frequency. - FMS is used to declare a freq_multi_tbl with the frequency and an array of a single conf with the provided src, pre_div, m and n. Struct clk_rcg2 is changed to add a union type to reference a simple freq_tbl or a complex freq_multi_tbl. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20231220221724.3822-2-ansuelsmth@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-23clk: qcom: hfpll: Add QCS404-specific compatibleLuca Weiss1-2/+4
It doesn't appear that the configuration is for the HFPLL is generic, so add a qcs404-specific compatible and rename the existing struct to qcs404. Keep qcom,hfpll in the driver for compatibility with old dtbs. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20240218-hfpll-yaml-v2-2-31543e0d6261@z3ntu.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-21clk: qcom: clk-alpha-pll: fix kerneldoc of struct clk_alpha_pllGabor Juhos1-1/+3
Add missing descriptions of the 'num_vco' and 'flags' members to clk_alpha_pll structure's documentation. Also reorder the member description entries to match the order of the declarations. Eliminates the following warnings: drivers/clk/qcom/clk-alpha-pll.h:72: info: Scanning doc for struct clk_alpha_pll drivers/clk/qcom/clk-alpha-pll.h:91: warning: Function parameter or struct member 'num_vco' not described in 'clk_alpha_pll' drivers/clk/qcom/clk-alpha-pll.h:91: warning: Function parameter or struct member 'flags' not described in 'clk_alpha_pll' No functional changes. Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240321-alpha-pll-kerneldoc-v1-1-0d76926b72c3@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-21clk: qcom: clk-alpha-pll: reorder Stromer register offsetsGabor Juhos1-1/+1
The register offset arrays are ordered based on the register offsets for all PLLs but the Stromer. For consistency, reorder the Stromer specific array as well. No functional changes. Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240311-alpha-pll-stromer-cleanup-v1-2-f7c0c5607cca@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-21clk: qcom: clk-alpha-pll: remove invalid Stromer register offsetGabor Juhos1-1/+0
The offset of the CONFIG_CTL_U register defined for the Stromer PLL is wrong. It is not aligned on a 4 bytes boundary which might causes errors in regmap operations. Maybe the intention behind of using the 0xff value was to indicate that the register is not implemented in the PLL, but this is not verified anywhere in the code. Moreover, this value is not used even in other register offset arrays despite that those PLLs also have unimplemented registers. Additionally, on the Stromer PLLs the current code only touches the CONFIG_CTL_U register if the result of pll_has_64bit_config() is true which condition is not affected by the change. Due to the reasons above, simply remove the CONFIG_CTL_U entry from the Stromer specific array. Fixes: e47a4f55f240 ("clk: qcom: clk-alpha-pll: Add support for Stromer PLLs") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240311-alpha-pll-stromer-cleanup-v1-1-f7c0c5607cca@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-21clk: qcom: gcc-sm8150: De-register gcc_cpuss_ahb_clk_srcSatya Priya Kakitapalli1-61/+0
De-register the gcc_cpuss_ahb_clk_src and its branch clocks as there is no rate setting happening on them. Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Link: https://lore.kernel.org/r/20240213-gcc-ao-support-v2-1-fd2127e8d8f4@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-20clk: qcom: rpm: Remove an unused field in struct rpm_ccChristophe JAILLET1-1/+0
In "struct rpm_cc", the 'rpm' field is unused. Remove it. Found with cppcheck, unusedStructMember. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/9f92330c717e6f2dab27b1307565ffb108c304a7.1713017032.git.christophe.jaillet@wanadoo.fr Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-20clk: qcom: clk-alpha-pll: Skip reconfiguring the running Lucid EvoAbel Vesa1-0/+9
The PLL0 is configured by the bootloader and is the parent of the mdp_clk_src. The Trion implementation of the configure function is already skipping this step if the PLL is enabled, so lets extend the same behavior to Lucid Evo variant. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20240418-clk-qcom-lucid-evo-skip-configuring-enabled-v1-1-caede5f1c7a3@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-11clk: qcom: fix module autoloadingKrzysztof Kozlowski2-0/+2
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Clocks are considered core components, so usually they are built-in, however these can be built and used as modules on some generic kernel. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240410155356.224098-1-krzk@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-14 17:04:24 +0300