summaryrefslogtreecommitdiff
path: root/drivers/clk/sunxi-ng
AgeCommit message (Collapse)AuthorFilesLines
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds16-221/+397
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-06-25Merge tag 'sunxi-ng-parent-rewrite-part-1-take-2' of ↵Stephen Boyd16-220/+396
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner Pull Allwinner sunxi-ng clk driver parent relation rewrite part 1 - take 2 from Chen-Yu Tsai: "The first part of ongoing work to convert the sunxi-ng clk driver from using global clock name strings to describe clk parenting, to having direct struct clk_hw pointers, or local names based on clock-names from the device tree binding. This is based on Stephen Boyd's recent work allowing clk drivers to specify clk parents using struct clk_hw * or parsing DT phandles in the clk node. This series can be split into a few major parts: 1) The first patch is a small fix for clk debugfs representation. 2) A bunch of CLK_HW_INIT_* helper macros are added. These cover the situations I encountered, or assume I will encounter, such as single internal (struct clk_hw *) parent, single DT (struct clk_parent_data .fw_name), multiple internal parents, and multiple mixed (internal + DT) parents. A special variant for just an internal single parent is added, CLK_HW_INIT_HWS, which lets the driver share the singular list, instead of having the compiler create a compound literal every time. It might even make sense to only keep this variant. 3) A bunch of CLK_FIXED_FACTOR_* helper macros are added. The rationale is the same as the single parent CLK_HW_INIT_* helpers. 4) Bulk conversion of CLK_FIXED_FACTOR to use local parent references, either struct clk_hw * or DT .fw_name types, whichever the hardware requires. 5) The beginning of SUNXI_CCU_GATE conversion to local parent references. This part is not done. They are included as justification and examples for the shared list of clk parents case." * tag 'sunxi-ng-parent-rewrite-part-1-take-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (25 commits) clk: sunxi-ng: sun8i-r: Use local parent references for SUNXI_CCU_GATE clk: sunxi-ng: a80-usb: Use local parent references for SUNXI_CCU_GATE clk: sunxi-ng: gate: Add macros for referencing local clock parents clk: sunxi-ng: h6-r: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: h6: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: a64: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: f1c100s: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: sun8i-r: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: v3s: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: r40: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: h3: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: a33: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: a23: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: a31: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: sun5i: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: a10: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: sun8i-r: Use local parent references for CLK_HW_INIT_* clk: sunxi-ng: switch to of_clk_hw_register() for registering clks clk: fixed-factor: Add CLK_FIXED_FACTOR_FW_NAME for DT clock-names parent clk: fixed-factor: Add CLK_FIXED_FACTOR_HWS which takes list of struct clk_hw * ...
2019-06-22clk: sunxi-ng: sun8i-r: Use local parent references for SUNXI_CCU_GATEChen-Yu Tsai1-14/+23
With the new clk parenting code and SUNXI_CCU_GATE macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing SUNXI_CCU_GATE definitions to SUNXI_CCU_GATE_HWS as the parent clock is internal to this clock unit. To avoid duplication of clock definitions, we fix up the parent reference for A83T in the A83T init function. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22clk: sunxi-ng: a80-usb: Use local parent references for SUNXI_CCU_GATEChen-Yu Tsai1-12/+20
With the new clk parenting code and SUNXI_CCU_GATE macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing SUNXI_CCU_GATE definitions to SUNXI_CCU_GATE_DATA to specify the parent clock. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22clk: sunxi-ng: gate: Add macros for referencing local clock parentsChen-Yu Tsai1-0/+53
With the new clk parenting code, clk_init_data was expanded to include .parent_hws, for clk drivers to directly reference parents by clk_hw, and .parent_data, for clk drivers to specify parents using a combination of device tree clock-names, pointers to struct clk_hw, device tree clocks, and/or fallback global clock names. Add four new macros: - SUNXI_CCU_GATE_HW, that can take a struct clk_hw pointer, instead of a string, as its parent. - SUNXI_CCU_GATE_FW that takes a string to match a clock-names entry in the device tree to specify the clock parent. - SUNXI_CCU_GATE_HWS that takes an array of struct clk_hw * as its parent. This allows the array to be shared with other clk declarations. - SUNXI_CCU_GATE_DATA that takes an array of struct clk_parent_data * as its parent. This allows the array to be shared with other clk declarations. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22clk: sunxi-ng: h6-r: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-1/+1
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22clk: sunxi-ng: h6: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-25/+44
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. A forward declaration for struct clk_fixed_factor pll_periph0_4x_clk is added as the definitions of the fixed factor clocks appear much later in the file. The position of fixed factor clock definitions will be moved for all drivers at a later time, before the conversion of all other clock types. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22clk: sunxi-ng: a64: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-15/+26
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22clk: sunxi-ng: f1c100s: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-10/+19
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: sun8i-r: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-1/+1
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: v3s: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-10/+19
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: r40: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-17/+29
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: h3: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-10/+19
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: a33: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-12/+22
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: a23: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-12/+22
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: a31: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-14/+25
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: sun5i: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-12/+22
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: a10: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-14/+25
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: sun8i-r: Use local parent references for CLK_HW_INIT_*Chen-Yu Tsai1-40/+25
With the new clk parenting code and CLK_HW_INIT_* macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_HW_INIT_* definitions to describe parents using either struct clk_hw pointers or clock-names from the device tree binding. For the AR100, this also allows us to merge the generic AR100 and the A83T specific one, which only differed in the global clock names for their parent clocks. The device tree bindings used the same name specifiers. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: switch to of_clk_hw_register() for registering clksChen-Yu Tsai1-1/+1
Commit 89a5ddcc799d ("clk: Add of_clk_hw_register() API for early clk drivers") introduces a new API for registering clks, which allows the user to directly specify a device node, even if there is no struct device attached to it. The device node is used for local DT clock-names matching. Switch to of_clk_hw_register() so that local DT clock-names matching works. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner28-252/+28
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05clk: sunxi-ng: sun50i-h6-r: Fix incorrect W1 clock gate registerOndrej Jirman1-1/+1
The current code defines W1 clock gate to be at 0x1cc, overlaying it with the IR gate. Clock gate for r-apb1-w1 is at 0x1ec. This fixes issues with IR receiver causing interrupt floods on H6 (because interrupt flags can't be cleared, due to IR module's bus being disabled). Fixes: b7c7b05065aa77ae ("clk: sunxi-ng: add support for H6 PRCM CCU") Signed-off-by: Ondrej Jirman <megous@megous.com> Acked-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner15-150/+15
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner13-65/+13
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd26-0/+26
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-07Merge branches 'clk-stm32f4', 'clk-tegra', 'clk-at91', 'clk-sifive-fu540' ↵Stephen Boyd2-3/+3
and 'clk-spdx' into clk-next - Support for STM32F769 - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support * clk-stm32f4: clk: stm32mp1: Add ddrperfm clock clk: stm32: Introduce clocks of STM32F769 board * clk-tegra: clk: tegra: divider: Mark Memory Controller clock as read-only clk: tegra: emc: Replace BUG() with WARN_ONCE() clk: tegra: emc: Fix EMC max-rate clamping clk: tegra: emc: Support multiple RAM codes clk: tegra: emc: Don't enable EMC clock manually clk: tegra124: Remove lock-enable bit from PLLM clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider clk: tegra: Don't enable already enabled PLLs * clk-at91: clk: at91: Mark struct clk_range as const clk: at91: add sam9x60 pmc driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 PLL driver clk: at91: master: Add sam9x60 support clk: at91: usb: Add sam9x60 support clk: at91: allow configuring generated PCR layout clk: at91: allow configuring peripheral PCR layout clk: at91: sckc: handle different RC startup time clk: at91: modernize sckc binding dt-bindings: clock: at91: new sckc bindings * clk-sifive-fu540: clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library dt-bindings: clk: add documentation for the SiFive PRCI driver * clk-spdx: clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier
2019-05-07Merge branches 'clk-hisi', 'clk-lochnagar', 'clk-allwinner', 'clk-rockchip' ↵Stephen Boyd6-13/+23
and 'clk-qoriq' into clk-next - Mark UFS clk as critical on Hi-Silicon hi3660 SoCs - Support for Cirrus Logic Lochnagar clks * clk-hisi: clk: hi3660: Mark clk_gate_ufs_subsys as critical * clk-lochnagar: clk: lochnagar: Add support for the Cirrus Logic Lochnagar clk: lochnagar: Add initial binding documentation * clk-allwinner: clk: sunxi-ng: sun5i: Export the MBUS clock clk: sunxi-ng: a83t: Add pll-video0 as parent of csi-mclk clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rate clk: sunxi-ng: h6: Preset hdmi-cec clock parent clk: sunxi: Add Kconfig options clk: sunxi-ng: f1c100s: fix USB PHY gate bit offset clk: sunxi-ng: Allow DE clock to set parent rate * clk-rockchip: clk: rockchip: undo several noc and special clocks as critical on rk3288 clk: rockchip: add a COMPOSITE_DIV_OFFSET clock-type clk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288 clk: rockchip: Limit use of USB PHY clock to USB on rk3288 clk: rockchip: Fix video codec clocks on rk3288 clk: rockchip: Make rkpwm a critical clock on rk3288 clk: rockchip: fix wrong clock definitions for rk3328 * clk-qoriq: clk: qoriq: increase array size of cmux_to_group dt-bindings: qoriq-clock: Add ls1028a chip compatible string clk: qoriq: Add ls1028a clock configuration clk: qoriq: add more PLL divider clocks support dt-bindings: qoriq-clock: add more PLL divider clocks support
2019-05-01clk: sunxi-ng: Use the correct style for SPDX License IdentifierNishad Kamdar2-3/+3
This patch corrects the SPDX License Identifier style in header files related to Clock Drivers for Allwinner SoCs. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-10clk: sunxi-ng: sun5i: Export the MBUS clockMaxime Ripard1-4/+0
The MBUS clock is used by the MBUS controller, so let's export it so that we can use it in our DT node. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-09clk: sunxi-ng: a83t: Add pll-video0 as parent of csi-mclkChen-Yu Tsai1-2/+3
Allwinner's BSP for the A83T lists pll-video0 as the first parent to csi-mclk with index 0. This parent is not listed in the datasheet, but actually works, and makes more sense considering the index is the default value out of reset. Add pll-video0 as a parent to csi-mclk with index 0. Fixes: 05359be1176b ("clk: sunxi-ng: Add driver for A83T CCU") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-04clk: sunxi-ng: nkmp: Explain why zero width check is neededJernej Skrabec1-0/+6
Add an explanation why zero width check is needed when generating factor mask using GENMASK() macro. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-04clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rateJernej Skrabec1-3/+3
Video related clocks need to set rate as close as possible to the requested one, so they should be able to change parent clock rate. When processing 4K video, VPU clock has to be set to higher rate than it is default parent rate. Because of that, VPU clock should be able to change parent clock rate. Add CLK_SET_RATE_PARENT flag to tcon-lcd0, tcon-tv0 and ve. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-03clk: sunxi-ng: h6: Preset hdmi-cec clock parentJernej Skrabec1-0/+11
H6 manual and BSP clock driver both states that hdmi-cec clock has two possible parents, osc32k and pll-periph0-2x with 36621 predivider. Because pll-periph0-2x is always 1.2 GHz, both parents give same hdmi-cec rate - 32768 Hz, which is exactly the rate needed for HDMI CEC controller to operate correctly. However, for some reason, HDMI CEC controller doesn't work if default parent (osc32k) is used. BSP HDMI driver also always use pll-periph0-2x as hdmi-cec clock parent. In order to solve the issue, preset hdmi-cec clock parent to pll-periph0-2x. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-03clk: sunxi-ng: nkmp: Avoid GENMASK(-1, 0)Jernej Skrabec1-5/+13
Sometimes one of the nkmp factors is unused. This means that one of the factors shift and width values are set to 0. Current nkmp clock code generates a mask for each factor with GENMASK(width + shift - 1, shift). For unused factor this translates to GENMASK(-1, 0). This code is further expanded by C preprocessor to final version: (((~0UL) - (1UL << (0)) + 1) & (~0UL >> (BITS_PER_LONG - 1 - (-1)))) or a bit simplified: (~0UL & (~0UL >> BITS_PER_LONG)) It turns out that result of the second part (~0UL >> BITS_PER_LONG) is actually undefined by C standard, which clearly specifies: "If the value of the right operand is negative or is greater than or equal to the width of the promoted left operand, the behavior is undefined." Additionally, compiling kernel with aarch64-linux-gnu-gcc 8.3.0 gave different results whether literals or variables with same values as literals were used. GENMASK with literals -1 and 0 gives zero and with variables gives 0xFFFFFFFFFFFFFFF (~0UL). Because nkmp driver uses GENMASK with variables as parameter, expression calculates mask as ~0UL instead of 0. This has further consequences that LSB in register is always set to 1 (1 is neutral value for a factor and shift is 0). For example, H6 pll-de clock is set to 600 MHz by sun4i-drm driver, but due to this bug ends up being 300 MHz. Additionally, 300 MHz seems to be too low because following warning can be found in dmesg: [ 1.752763] WARNING: CPU: 2 PID: 41 at drivers/clk/sunxi-ng/ccu_common.c:41 ccu_helper_wait_for_lock.part.0+0x6c/0x90 [ 1.763378] Modules linked in: [ 1.766441] CPU: 2 PID: 41 Comm: kworker/2:1 Not tainted 5.1.0-rc2-next-20190401 #138 [ 1.774269] Hardware name: Pine H64 (DT) [ 1.778200] Workqueue: events deferred_probe_work_func [ 1.783341] pstate: 40000005 (nZcv daif -PAN -UAO) [ 1.788135] pc : ccu_helper_wait_for_lock.part.0+0x6c/0x90 [ 1.793623] lr : ccu_helper_wait_for_lock.part.0+0x48/0x90 [ 1.799107] sp : ffff000010f93840 [ 1.802422] x29: ffff000010f93840 x28: 0000000000000000 [ 1.807735] x27: ffff800073ce9d80 x26: ffff000010afd1b8 [ 1.813049] x25: ffffffffffffffff x24: 00000000ffffffff [ 1.818362] x23: 0000000000000001 x22: ffff000010abd5c8 [ 1.823675] x21: 0000000010000000 x20: 00000000685f367e [ 1.828987] x19: 0000000000001801 x18: 0000000000000001 [ 1.834300] x17: 0000000000000001 x16: 0000000000000000 [ 1.839613] x15: 0000000000000000 x14: ffff000010789858 [ 1.844926] x13: 0000000000000000 x12: 0000000000000001 [ 1.850239] x11: 0000000000000000 x10: 0000000000000970 [ 1.855551] x9 : ffff000010f936c0 x8 : ffff800074cec0d0 [ 1.860864] x7 : 0000800067117000 x6 : 0000000115c30b41 [ 1.866177] x5 : 00ffffffffffffff x4 : 002c959300bfe500 [ 1.871490] x3 : 0000000000000018 x2 : 0000000029aaaaab [ 1.876802] x1 : 00000000000002e6 x0 : 00000000686072bc [ 1.882114] Call trace: [ 1.884565] ccu_helper_wait_for_lock.part.0+0x6c/0x90 [ 1.889705] ccu_helper_wait_for_lock+0x10/0x20 [ 1.894236] ccu_nkmp_set_rate+0x244/0x2a8 [ 1.898334] clk_change_rate+0x144/0x290 [ 1.902258] clk_core_set_rate_nolock+0x180/0x1b8 [ 1.906963] clk_set_rate+0x34/0xa0 [ 1.910455] sun8i_mixer_bind+0x484/0x558 [ 1.914466] component_bind_all+0x10c/0x230 [ 1.918651] sun4i_drv_bind+0xc4/0x1a0 [ 1.922401] try_to_bring_up_master+0x164/0x1c0 [ 1.926932] __component_add+0xa0/0x168 [ 1.930769] component_add+0x10/0x18 [ 1.934346] sun8i_dw_hdmi_probe+0x18/0x20 [ 1.938443] platform_drv_probe+0x50/0xa0 [ 1.942455] really_probe+0xcc/0x280 [ 1.946032] driver_probe_device+0x54/0xe8 [ 1.950130] __device_attach_driver+0x80/0xb8 [ 1.954488] bus_for_each_drv+0x78/0xc8 [ 1.958326] __device_attach+0xd4/0x130 [ 1.962163] device_initial_probe+0x10/0x18 [ 1.966348] bus_probe_device+0x90/0x98 [ 1.970185] deferred_probe_work_func+0x6c/0xa0 [ 1.974720] process_one_work+0x1e0/0x320 [ 1.978732] worker_thread+0x228/0x428 [ 1.982484] kthread+0x120/0x128 [ 1.985714] ret_from_fork+0x10/0x18 [ 1.989290] ---[ end trace 9babd42e1ca4b84f ]--- This commit solves the issue by first checking value of the factor width. If it is equal to 0 (unused factor), mask is set to 0, otherwise GENMASK() macro is used as before. Fixes: d897ef56faf9 ("clk: sunxi-ng: Mask nkmp factors when setting register") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-18clk: sunxi-ng: f1c100s: fix USB PHY gate bit offsetIcenowy Zheng1-1/+1
The bit offset of the USB PHY clock gate on F1C100s should be 1, not 8. Fix this problem. Fixes: 0380126eb9af ("clk: sunxi-ng: add support for suniv F1C100s SoC") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-18clk: sunxi-ng: Allow DE clock to set parent rateJernej Skrabec3-3/+5
DE2/DE3 mixers have to run at specific frequency in order to work optimally. This wasn't actually possible for some SoCs because "de" clock wasn't allowed to adjust parent rate. Add CLK_SET_RATE_PARENT flag to all "de" clocks which didn't have it yet. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-08Merge branches 'clk-optional', 'clk-devm-clkdev-register', 'clk-allwinner', ↵Stephen Boyd1-1/+1
'clk-meson' and 'clk-renesas' into clk-next - Add a {devm_}clk_get_optional() API - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups * clk-optional: clk: Add (devm_)clk_get_optional() functions clk: Add comment about __of_clk_get_by_name() error values * clk-devm-clkdev-register: clk: clk-st: avoid clkdev lookup leak at remove clk: clk-max77686: Clean clkdev lookup leak and use devm clkdev: add managed clkdev lookup registration * clk-allwinner: clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it * clk-meson: (22 commits) clk: meson: meson8b: fix the naming of the APB clocks dt-bindings: clock: meson8b: add APB clock definition clk: meson: Add G12A AO Clock + Reset Controller dt-bindings: clk: add G12A AO Clock and Reset Bindings clk: meson: factorise meson64 peripheral clock controller drivers clk: meson: g12a: add peripheral clock controller dt-bindings: clk: meson: add g12a periph clock controller bindings clk: meson: pll: update driver for the g12a clk: meson: rework and clean drivers dependencies clk: meson: axg-audio does not require syscon clk: meson: use CONFIG_ARCH_MESON to enter meson clk directory clk: export some clk_hw function symbols for module drivers clk: meson: ao-clkc: claim clock controller input clocks from DT clk: meson: axg: claim clock controller input clock from DT clk: meson: gxbb: claim clock controller input clock from DT clk: meson: meson8b: add the GPU clock tree clk: meson: meson8b: use a separate clock table for Meson8 clk: meson: axg-ao: add 32k generation subtree clk: meson: gxbb-ao: replace cec-32k with the dual divider clk: meson: add dual divider clock driver ... * clk-renesas: clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK clk: renesas: r8a774c0: Fix LAST_DT_CORE_CLK clk: renesas: r8a774c0: Add TMU clock clk: renesas: r8a77980: Add RPC clocks clk: renesas: rcar-gen3: Add RPC clocks clk: renesas: rcar-gen3: Add spinlock clk: renesas: rcar-gen3: Factor out cpg_reg_modify() clk: renesas: r8a774c0: Correct parent clock of DU clk: renesas: r8a774a1: Add missing CANFD clock clk: renesas: r8a774c0: Add missing CANFD clock
2019-01-28clk: sunxi: A31: Fix wrong AHB gate numberAndre Przywara1-2/+2
According to the manual the gate clock for MMC3 is at bit 11, and NAND1 is controlled by bit 12. Fix the gate bit definitions in the clock driver. Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-25clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating itChen-Yu Tsai1-1/+1
The PLL-MIPI clock is somewhat special as it has its own LDOs which need to be turned on for this PLL to actually work and output a clock signal. Add the 2 LDO enable bits to the gate bits. Fixes: 5690879d93e8 ("clk: sunxi-ng: Add A23 CCU") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-22clk: sunxi-ng: v3s: Fix TCON reset de-assert bitPaul Kocialkowski1-1/+1
According to the datasheet and the reference code from Allwinner, the bit used to de-assert the TCON reset is bit 4, not bit 3. Fix it in the V3s CCU driver. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-10clk: sunxi-ng: a64: Allow parent change for VE clockJernej Skrabec1-1/+1
Cedrus driver wants to set VE clock higher than it's possible without changing parent rate. Allow changing parent rate for VE clock, so clock rate can be set freely. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-05clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for all audio module clocksChen-Yu Tsai1-3/+3
All the audio interfaces on Allwinner SoCs need to change their module clocks during operation, to switch between support for 44.1 kHz and 48 kHz family sample rates. The clock rate for the module clocks is governed by their upstream audio PLL. The module clocks themselves only have a gate, and sometimes a divider or mux. Thus any rate changes need to be propagated upstream. Set the CLK_SET_RATE_PARENT flag for all audio module clocks to achieve this. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-05clk: sunxi-ng: a33: Use sigma-delta modulation for audio PLLChen-Yu Tsai1-13/+24
The audio blocks require specific clock rates. Until now we were using the closest clock rate possible with integer N-M factors. This resulted in audio playback being slightly slower than it should be. The vendor kernel gets around this (for newer SoCs) by using sigma-delta modulation to generate a fractional-N factor. As the PLL hardware is identical in most chips, we can back port the settings from the newer SoC, in this case the H3, onto the A33. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-04clk: sunxi-ng: h3: Allow parent change for ve clockJernej Skrabec1-1/+1
Cedrus driver wants to set VE clock higher than it's possible without changing parent rate. In order to correct that, allow changing parent rate for VE clock. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-04clk: sunxi-ng: add support for suniv F1C100s SoCMesih Kilinc4-0/+581
The suniv F1C100s SoC (the chip in some new F-series products of Allwinner) has a CCU which seems to be a stripped version of the CCU in SoCs after sun6i. Add support for the CCU. Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-03clk: sunxi-ng: h3/h5: Fix CSI_MCLK parentChen-Yu Tsai1-1/+1
The third parent of CSI_MCLK is PLL_PERIPH1, not PLL_PERIPH0. Fix it. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-11-30clk: sunxi-ng: r40: Force LOSC parent to RTC LOSC outputChen-Yu Tsai1-0/+11
On the R40, in addition to a mux between the RTC's own RC oscillator and an external 32768 Hz crystal, which are muxed inside the RTC module, the CCU also has its own RC oscillator, which runs at around 2 MHz, and can be muxed with the LOSC output from the RTC. This muxed output is called "SYS 32K" in the module clock diagram, but otherwise referred to as the LOSC throughout the CCU documentation. The RC oscillator is not very accurate, even though it has an undocumented calibration function. We really want a precise clock at 32768 Hz, instead of something at around 32 KHz. This patch forces the SYS 32K clock to use the RTC output as its parent, and doesn't bother registering the internal oscillator nor a clock mux. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-11-23clk: sunxi-ng: sun50i: a64: Use sigma-delta modulation for audio PLLChen-Yu Tsai1-13/+24
The audio blocks require specific clock rates. Until now we were using the closest clock rate possible with integer N-M factors. This resulted in audio playback being slightly slower than it should be. The vendor kernel gets around this (for some SoCs) by using sigma-delta modulation to generate a fractional-N factor. As the PLL hardware is identical in most chips, we can port the settings for H3 onto the A64. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-11-13clk: sunxi-ng: a64: Fix gate bit of DSI DPHYJagan Teki1-1/+1
DSI DPHY gate bit on MIPI DSI clock register is bit 15 not bit 30. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>