summaryrefslogtreecommitdiff
path: root/drivers/clk/tegra
AgeCommit message (Collapse)AuthorFilesLines
2014-01-24Merge tag 'clk-for-linus-3.14-part1' of ↵Linus Torvalds2-7/+7
git://git.linaro.org/people/mike.turquette/linux Pull clk framework changes from Mike Turquette: "The first half of the clk framework pull request is made up almost entirely of new platform/driver support. There are some conversions of existing drivers to the common-clock Device Tree binding, and a few non-critical fixes to the framework. Due to an entirely unnecessary cyclical dependency with the arm-soc tree this pull request is broken into two pieces. The second piece will be sent out after arm-soc sends you the pull request that merged in core support for the HiSilicon 3620 platform. That same pull request from arm-soc depends on this pull request to merge in those HiSilicon bits without causing build failures" [ Just did the ARM SoC merges, so getting ready for the second clk tree pull request - Linus ] * tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux: (97 commits) devicetree: bindings: Document qcom,mmcc devicetree: bindings: Document qcom,gcc clk: qcom: Add support for MSM8660's global clock controller (GCC) clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC) clk: qcom: Add support for MSM8974's global clock controller (GCC) clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC) clk: qcom: Add support for MSM8960's global clock controller (GCC) clk: qcom: Add reset controller support clk: qcom: Add support for branches/gate clocks clk: qcom: Add support for root clock generators (RCGs) clk: qcom: Add support for phase locked loops (PLLs) clk: qcom: Add a regmap type clock struct clk: Add set_rate_and_parent() op reset: Silence warning in reset-controller.h clk: sirf: re-arch to make the codes support both prima2 and atlas6 clk: composite: pass mux_hw into determine_rate clk: shmobile: Fix MSTP clock array initialization clk: shmobile: Fix MSTP clock index ARM: dts: Add clock provider specific properties to max77686 node clk: max77686: Register OF clock provider ...
2013-12-20clk: tegra: Staticize tegra_clk_periph_nodiv_opsSachin Kamat1-1/+1
tegra_clk_periph_nodiv_ops is used only in this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-12-20clk: tegra: Staticize local variables in clk-pll.cSachin Kamat1-6/+6
Local variables used only in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-12-12clk: tegra: remove bogus PCIE_XCLKStephen Warren2-13/+0
The "pcie_xclk" clock is not actually a clock at all, but rather a reset domain. Now that the custom Tegra module reset API has been removed, we can remove the definition of any "clocks" that existed solely to support it. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-12-12clk: tegra: remove legacy reset APIsStephen Warren3-63/+0
Now that no code uses the custom Tegra module reset API, we can remove its implementation. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-12-12clk: tegra: implement a reset driverStephen Warren6-6/+57
The Tegra CAR module implements both a clock and reset controller. So far, the driver exposes the clock feature via the common clock API and the reset feature using a custom API. This patch adds an implementation of the common reset framework API (include/linux/reset*.h). The legacy reset implementation will be removed once all drivers have been converted. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-28clk: tegra: fix __clk_lookup() return value checksWei Yongjun1-4/+4
In case of error, the function __clk_lookup() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-28clk: tegra: Do not print errors for clk_round_rate()Thierry Reding1-6/+3
clk_round_rate() can be used by drivers to determine whether or not a frequency is supported by the clock. The current Tegra clock driver outputs an error message and a stacktrace when the requested rate isn't supported. That's fine for clk_set_rate(), but it's confusing when all the driver does is query whether or not a frequency is supported. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-11-26clk: tegra: Initialize DSI low-power clocksThierry Reding1-0/+2
The low-power DSI clocks are used during host-driven transactions on the DSI bus. Documentation recommends that they be children of PLLP and run at a frequency of at least 52 MHz. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-11-26clk: tegra: add FUSE clock deviceAlexandre Courbot4-1/+4
This clock is needed to ensure the FUSE registers can be accessed without freezing the system. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
2013-11-26clk: tegra: Properly setup PWM clock on Tegra30Thierry Reding1-1/+3
The clock for the PWM controller is slightly different from other peripheral clocks on Tegra30. The clock source mux field start at bit position 28 rather than 30. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-11-26clk: tegra: Initialize secondary gr3d clock on Tegra30Thierry Reding1-0/+1
There are two GPUs on Tegra30 and each of them uses a separate clock, so the secondary clock needs to be initialized in order for the gr3d module to work properly. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-11-26clk: tegra114: Initialize clocks needed for HDMIMikko Perttunen1-0/+2
Add disp1 and disp2 clocks to the clock initialization table. These clocks are required for display and HDMI support. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-11-26clk: tegra124: add suspend/resume function for tegra_cpu_car_opsJoseph Lo1-0/+27
Adding suspend/resume function for tegra_cpu_car_ops. We only save and restore the setting of the clock of CoreSight. Other clocks still need to be taken care by clock driver. Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Joseph Lo <josephl@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2013-11-26clk: tegra124: add wait_for_reset and disable_clock for tegra_cpu_car_opsJoseph Lo1-0/+26
Hook the functions for CPU hotplug support. After the CPU is hot unplugged, the flow controller will handle to clock gate the CPU clock. But still need to implement an empty function to avoid warning message. Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Joseph Lo <josephl@nvidia.com>
2013-11-26clk: tegra124: Add support for Tegra124 clocksPeter De Schrijver2-0/+1371
Implement clock support for Tegra124. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra124: Add new peripheral clocksPeter De Schrijver1-0/+69
Tegra124 introduces a number of new peripheral clocks. This patch adds those to the common peripheral clock code. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra124: Add common clk IDs to clk-id.hPeter De Schrijver1-0/+22
Tegra124 introduces a number of a new clocks. Introduce the corresponding the IDs for them. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: add TEGRA_PERIPH_NO_GATEPeter De Schrijver3-3/+22
Tegra124 has a clock which consists of a mux and a fractional divider. Add support for this. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-11-26clk: tegra: add locking to periph clksPeter De Schrijver2-19/+24
Tegra124 has periph clocks which share the hw register. Hence locking is required. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-11-26clk: tegra: Add periph regs bank XPeter De Schrijver1-0/+10
Tegra124 has an extra bank of peripheral clock registers. Add it to the generic peripheral clock code. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: Add support for PLLSSPeter De Schrijver2-2/+126
Tegra124 introduces a new PLL type, PLLSS. Add support for it. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: move tegra20 to common infraPeter De Schrijver1-402/+255
Move tegra20 to common tegra clock infrastructure. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: move tegra30 to common infraPeter De Schrijver1-895/+403
Move tegra30 to common tegra clock infrastructure. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: introduce common gen4 super clockPeter De Schrijver4-74/+155
Introduce a common function which performs super clock initialization for Tegra114 and beyond. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: move PMC, fixed clocks to common filesPeter De Schrijver5-74/+253
Introduce new files for fixed and PMC clocks common between several Tegra SoCs and move Tegra114 to this new infrastructure. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: move periph clocks to common filePeter De Schrijver6-581/+627
Introduce a new file for peripheral clocks common between several Tegra SoCs and move Tegra114 to this new infrastructure. Also PLLP and the PLLP_OUT clocks will be initialized here. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: move audio clk to common filePeter De Schrijver4-208/+402
Move audio clocks and PLLA initialization to a common file so it can be used by multiple Tegra SoCs. Also a new array tegra114_clks is introduced for Tegra114 which specifies which common clocks are available on Tegra114 and what their DT IDs are. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: add clkdev registration infraPeter De Schrijver3-159/+179
Add a common infra for registering clkdev. This allows decoupling clk registration from clkdev registration. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: add common infra for DT clocksPeter De Schrijver2-0/+16
Introduce a common infrastructure for sharing clock initialization between SoCs. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: add header for common tegra clock IDsPeter De Schrijver1-0/+213
Many clocks are common between several Tegra SoCs. Define an enum to list them so we can move them to separate files which can be shared between SoCs. Each SoC specific file will provide an array with the common clocks which are present on the SoC and their DT binding ID. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: move fields to tegra_clk_pll_paramsPeter De Schrijver5-177/+175
Move some fields related to the PLL HW description to the tegra_clk_pll_params. This allows some PLL code to be moved to common files later. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: use pll_ref as the pll_e parentPeter De Schrijver2-4/+7
Use pll_ref instead of pll_re_vco as the pll_e parent on Tegra114. Also add a 12Mhz pll_ref table entry for pll_e for Tegra114. This prevents the system from crashing at bootup because of an unsupported pll_re_vco rate. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: move some PLLC and PLLXC init to clk-pll.cPeter De Schrijver2-93/+111
VCO min clipping, dynamic ramp setup and IDDQ init can be done in the respective PLL clk_register functions if the parent is already registered. This is done for other some PLLs already. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: Add TEGRA_PERIPH_NO_DIV flagPeter De Schrijver2-3/+9
This flag indicates the peripheral clock does not have a divider. It will simplify the initialization tables and avoids some very similar code. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: common periph_clk_enb_refcnt and clksPeter De Schrijver6-108/+85
This patch makes periph_clk_enb_refcnt a global array, dynamically allocated at boottime. It simplifies the macros somewhat and allows clocks common to several Tegra SoCs to be defined in a separate files. Also the clks array becomes global and dynamically allocated which allows the DT registration to be moved to a generic funcion. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: simplify periph clock dataPeter De Schrijver7-584/+464
This patch determines the register bank for clock enable/disable and reset based on the clock ID instead of hardcoding it in the tables describing the clocks. This results in less data to be maintained in the tables, making the code easier to understand. The full benefit of the change will be realized once also other clocktypes will be table based. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: Fix clock rate computationThierry Reding1-0/+2
The PLL output frequency is multiplied during the P-divider computation, so it needs to be divided by the P-divider again before returning. This fixes an issue where clk_round_rate() would return the multiplied frequency instead of the real one after the P-divider. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-11-26clk: tegra114: Rename gr_2d/gr_3d to gr2d/gr3dThierry Reding1-4/+4
These clocks were named gr2d and gr3d on Tegra20 and Tegra30, so use the same names on Tegra114 for consistency. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2013-11-26clk: tegra: PLLE spread spectrum controlPeter De Schrijver1-1/+29
Add spread spectrum control for PLLE in Tegra114. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-26clk: tegra: Set the clk parent of host1x to pll_pAndrew Chew1-0/+1
The power-on default parent for this clock is pll_m, which turns out to be wrong. Previously, bootloader reparented this clock. We'll do it in the kernel as well, so that there's one less thing that we depend on bootloader to initialize. Signed-off-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Mark Zhang <markz@nvidia.com>
2013-11-26clk: tegra: add TEGRA_DIVIDER_ROUND_UP for periph clksPeter De Schrijver2-33/+39
Perform upwards rounding when calculating dividers for periph clks on Tegra30 and Tegra114. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-25clk: tegra: Set the clock parent of gr2d/gr3d to pll_c2Mark Zhang1-0/+3
pll_m will be the parent of gr2d/gr3d if we don't do this. And because pll_m runs at a high rate so gr2d/gr3d will be unstable. So change the parent of them to pll_c2. Signed-off-by: Mark Zhang <markz@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-25clk: tegra: Fix vde/2d/3d clock src offsetMark Zhang1-10/+3
In Tegra114, vde/gr_2d/gr_3d have 3 bits for clock source selection. So change the clock init macro for these clocks from "TEGRA_INIT_DATA_INT" to "TEGRA_INIT_DATA_INT8". Besides, no one uses "TEGRA_INIT_DATA_INT" after this change, so remove this macro. Signed-off-by: Mark Zhang <markz@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-25clk: tegra: Correct sbc mux width & parentMark Zhang1-6/+6
Tegra114 sbc1-sbc6 have more possible parent clocks than Tegra30. So correct the parents and mux width for them. Signed-off-by: Mark Zhang <markz@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-25clk: tegra: replace enum tegra114_clk by binding headerPeter De Schrijver1-233/+198
As the clock IDs are now specified in a header file, we can use those definitions instead of maintaining an internal enum. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-09-10Merge tag 'clk-for-linus-3.12' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds3-29/+54
Pull clock framework changes from Michael Turquette: "The common clk framework changes for 3.12 are dominated by clock driver patches, both new drivers and fixes to existing. A high percentage of these are for Samsung platforms like Exynos. Core framework fixes and some new features like automagical clock re-parenting round out the patches" * tag 'clk-for-linus-3.12' of git://git.linaro.org/people/mturquette/linux: (102 commits) clk: only call get_parent if there is one clk: samsung: exynos5250: Simplify registration of PLL rate tables clk: samsung: exynos4: Register PLL rate tables for Exynos4x12 clk: samsung: exynos4: Register PLL rate tables for Exynos4210 clk: samsung: exynos4: Reorder registration of mout_vpllsrc clk: samsung: pll: Add support for rate configuration of PLL46xx clk: samsung: pll: Use new registration method for PLL46xx clk: samsung: pll: Add support for rate configuration of PLL45xx clk: samsung: pll: Use new registration method for PLL45xx clk: samsung: exynos4: Rename exynos4_plls to exynos4x12_plls clk: samsung: exynos4: Remove checks for DT node clk: samsung: exynos4: Remove unused static clkdev aliases clk: samsung: Modify _get_rate() helper to use __clk_lookup() clk: samsung: exynos4: Use separate aliases for cpufreq related clocks clocksource: samsung_pwm_timer: Get clock from device tree ARM: dts: exynos4: Specify PWM clocks in PWM node pwm: samsung: Update DT bindings documentation to cover clocks clk: Move symbol export to proper location clk: fix new_parent dereference before null check clk: wm831x: Initialise wm831x pointer on init ...
2013-08-29clk: tegra30: Don't wait for PLL_U lock bitTuomas Tynkkynen1-1/+1
The lock bit on PLL_U does not seem to be working correctly and sometimes never gets set when waiting for the PLL to come up. Remove the TEGRA_PLL_USE_LOCK flag to use a constant delay. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-19clk: add CLK_SET_RATE_NO_REPARENT flagJames Hogan3-25/+50
Add a CLK_SET_RATE_NO_REPARENT clock flag, which will prevent muxes being reparented during clk_set_rate. To avoid breaking existing platforms, all callers of clk_register_mux() are adjusted to pass the new flag. Platform maintainers are encouraged to remove the flag if they wish to allow mux reparenting on set_rate. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Chao Xie <xiechao.mail@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Emilio López" <emilio@elopez.com.ar> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrew Chew <achew@nvidia.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Thomas Abraham <thomas.abraham@linaro.org> Cc: Tomasz Figa <t.figa@samsung.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: spear-devel@list.st.com Cc: linux-tegra@vger.kernel.org Tested-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> [tegra] Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> [sunxi] Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> [Zynq] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-12clk: tegra114: add LP1 suspend/resume supportJoseph Lo1-0/+12
When the system suspends to LP1, the CPU clock source is switched to CLK_M (12MHz Oscillator) during suspend/resume flow. The CPU clock source is controlled by the CCLKG_BURST_POLICY register, and hence this register must be restored during LP1 resume. Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-24 21:33:10 +0300