Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit abb3fa662b8f8eaed1590b0e7a4e19eda467cdd3 ]
According to the R-Car V4H Series Hardware User’s Manual Rev.1.00, the
parent clock of the Pin Function (PFC/GPIO) module clocks is the CP
clock.
Fix this by adding the missing CP clock, and correcting the PFC parents.
Fixes: f2afa78d5a0c0b0b ("dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions")
Fixes: 36ff366033f0dde1 ("clk: renesas: r8a779g0: Add PFC/GPIO clocks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/5401fccd204dc90b44f0013e7f53b9eff8df8214.1706197297.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2f8cf2c3f3e3f7ef61bd19abb4b0bb797ad50aaf ]
Trying to toggle the resets in a rapid fashion can lead to the changes
not actually arriving at the clock controller block when we expect them
to. This was observed at least on SM8250.
Read back the value after regmap_update_bits to ensure write completion.
Fixes: b36ba30c8ac6 ("clk: qcom: Add reset controller support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-3-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eda40d9c583e95e0b6ac69d2950eec10f802e0e8 ]
They do the same thing, except the last argument of the last function
call differs. Commonize them.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-2-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 2f8cf2c3f3e3 ("clk: qcom: reset: Ensure write completion on reset de/assertion")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ba535bce57e71463a86f8b33a0ea88c26e3a6418 ]
Some clocks were missing from axg_clk_regmaps, which caused kernel panic
during cat /sys/kernel/debug/clk/clk_summary
[ 57.349402] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001fc
...
[ 57.430002] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 57.436900] pc : regmap_read+0x1c/0x88
[ 57.440608] lr : clk_regmap_gate_is_enabled+0x3c/0xb0
[ 57.445611] sp : ffff800082f1b690
[ 57.448888] x29: ffff800082f1b690 x28: 0000000000000000 x27: ffff800080eb9a70
[ 57.455961] x26: 0000000000000007 x25: 0000000000000016 x24: 0000000000000000
[ 57.463033] x23: ffff800080e8b488 x22: 0000000000000015 x21: ffff00000e7e7000
[ 57.470106] x20: ffff00000400ec00 x19: 0000000000000000 x18: ffffffffffffffff
[ 57.477178] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000042a3000
[ 57.484251] x14: 0000000000000000 x13: ffff0000042a2fec x12: 0000000005f5e100
[ 57.491323] x11: abcc77118461cefd x10: 0000000000000020 x9 : ffff8000805e4b24
[ 57.498396] x8 : ffff0000028063c0 x7 : ffff800082f1b710 x6 : ffff800082f1b710
[ 57.505468] x5 : 00000000ffffffd0 x4 : ffff800082f1b6e0 x3 : 0000000000001000
[ 57.512541] x2 : ffff800082f1b6e4 x1 : 000000000000012c x0 : 0000000000000000
[ 57.519615] Call trace:
[ 57.522030] regmap_read+0x1c/0x88
[ 57.525393] clk_regmap_gate_is_enabled+0x3c/0xb0
[ 57.530050] clk_core_is_enabled+0x44/0x120
[ 57.534190] clk_summary_show_subtree+0x154/0x2f0
[ 57.538847] clk_summary_show_subtree+0x220/0x2f0
[ 57.543505] clk_summary_show_subtree+0x220/0x2f0
[ 57.548162] clk_summary_show_subtree+0x220/0x2f0
[ 57.552820] clk_summary_show_subtree+0x220/0x2f0
[ 57.557477] clk_summary_show_subtree+0x220/0x2f0
[ 57.562135] clk_summary_show_subtree+0x220/0x2f0
[ 57.566792] clk_summary_show_subtree+0x220/0x2f0
[ 57.571450] clk_summary_show+0x84/0xb8
[ 57.575245] seq_read_iter+0x1bc/0x4b8
[ 57.578954] seq_read+0x8c/0xd0
[ 57.582059] full_proxy_read+0x68/0xc8
[ 57.585767] vfs_read+0xb0/0x268
[ 57.588959] ksys_read+0x70/0x108
[ 57.592236] __arm64_sys_read+0x24/0x38
[ 57.596031] invoke_syscall+0x50/0x128
[ 57.599740] el0_svc_common.constprop.0+0x48/0xf8
[ 57.604397] do_el0_svc+0x28/0x40
[ 57.607675] el0_svc+0x34/0xb8
[ 57.610694] el0t_64_sync_handler+0x13c/0x158
[ 57.615006] el0t_64_sync+0x190/0x198
[ 57.618635] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (b941fc00)
[ 57.624668] ---[ end trace 0000000000000000 ]---
[jbrunet: add missing Fixes tag]
Signed-off-by: Igor Prusov <ivprusov@salutedevices.com>
Link: https://lore.kernel.org/r/20240202172537.1.I64656c75d84284bc91e6126b50b33c502be7c42a@changeid
Fixes: 14ebb3154b8f ("clk: meson: axg: add Video Clocks")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 67c15187d4910ee353374676d4dddf09d8cb227e ]
When SPI transfer is being prepared, the spi-s3c64xx driver will call
clk_set_rate() to change the rate of SPI source clock (IPCLK). But IPCLK
is a gate (leaf) clock, so it must propagate the rate change up the
clock tree, so that corresponding DIV clocks can actually change their
divider values. Add CLK_SET_RATE_PARENT flag to corresponding clocks for
all SPI instances in Exynos850 (spi_0, spi_1 and spi_2) to make it
possible. This change involves next clocks:
usi_spi_0:
Clock Block Div range
--------------------------------------------
gout_spi0_ipclk CMU_PERI -
dout_peri_spi0 CMU_PERI /1..32
mout_peri_spi_user CMU_PERI -
dout_peri_ip CMU_TOP /1..16
usi_cmgp0:
Clock Block Div range
--------------------------------------------
gout_cmgp_usi0_ipclk CMU_CMGP -
dout_cmgp_usi0 CMU_CMGP /1..32
mout_cmgp_usi0 CMU_CMGP -
gout_clkcmu_cmgp_bus CMU_APM -
dout_apm_bus CMU_APM /1..8
usi_cmgp1:
Clock Block Div range
--------------------------------------------
gout_cmgp_usi1_ipclk CMU_CMGP -
dout_cmgp_usi1 CMU_CMGP /1..32
mout_cmgp_usi1 CMU_CMGP -
gout_clkcmu_cmgp_bus CMU_APM -
dout_apm_bus CMU_APM /1..8
With input clock of 400 MHz, this scheme provides next IPCLK rate range,
for each SPI block:
SPI0: 781 kHz ... 400 MHz
SPI1/2: 1.6 MHz ... 400 MHz
Accounting for internal /4 divider in SPI blocks, and because the max
SPI frequency is limited at 50 MHz, it gives us next SPI SCK rates:
SPI0: 200 kHz ... 49.9 MHz
SPI1/2: 400 kHz ... 49.9 MHz
Which should cover all possible applications of SPI bus. Of course,
setting SPI frequency to values as low as 500 kHz will also affect the
common bus dividers (dout_apm_bus or dout_peri_ip), which in turn
effectively lowers the rates for all leaf bus clocks derived from those
dividers, like HSI2C and I3C clocks. But at least it gives the board
designer a choice, whether to keep all clocks (SPI/HSI2C/I3C) at high
frequencies, or make all those clocks have lower frequencies. Not
propagating the rate change to those common dividers would limit this
choice to "only high frequencies are allowed for SPI/HSI2C/I3C" option,
making the common dividers useless. This decision follows the "Worse is
better" approach, relying on the users/engineers to know the system
internals when working with such low-level features, instead of trying
to account for all possible use-cases.
Fixes: 7dd05578198b ("clk: samsung: Introduce Exynos850 clock driver")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240125013858.3986-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 096311157d2a6bb8f06e28e1143e2a5de6a0183b ]
Fix a typo in the name of the module clock for the second PCIe channel.
Fixes: 5ab16198b431ca48 ("clk: renesas: r8a779g0: Add PCIe clocks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f582067564f357e2183d3db67b217084ecb51888.1706608032.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
The cmu_misc clock-names were renamed to just "bus" and "sss" because
naming is local to the module, so cmu_misc is implied. As the bindings
and the device tree have not made a release yet, comply with the
renamed clocks.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240109114908.3623645-4-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h.
of_device.h isn't needed, but mod_devicetable.h and platform_device.h
were implicitly included.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20231211160510.0aef871b@canb.auug.org.au
[robh: Redo commit msg]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Only a couple new SoCs have support added this time, primarily for
Qualcomm SM8650 based on the diffstat. Otherwise this is a collection
of non-critical fixes and cleanups to various clk drivers and their DT
bindings.
Nothing is changed in the core clk framework this time, although
there's a patch to fix a basic clk type initialization function. In
general, this pile looks to be on the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas
RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling
separate memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000
and QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"A new drivers/cache/ subsystem is added to contain drivers for
abstracting cache flush methods on riscv and potentially others, as
this is needed for handling non-coherent DMA but several SoCs require
nonstandard hardware methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
MT8195, and driver support for MT8188 along with some code
refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA
bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
hisilicon"
* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
memory: ti-emif-pm: Convert to platform remove callback returning void
memory: ti-aemif: Convert to platform remove callback returning void
memory: tegra210-emc: Convert to platform remove callback returning void
memory: tegra186-emc: Convert to platform remove callback returning void
memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
memory: exynos5422-dmc: Convert to platform remove callback returning void
memory: renesas-rpc-if: Convert to platform remove callback returning void
memory: omap-gpmc: Convert to platform remove callback returning void
memory: mtk-smi: Convert to platform remove callback returning void
memory: jz4780-nemc: Convert to platform remove callback returning void
memory: fsl_ifc: Convert to platform remove callback returning void
memory: fsl-corenet-cf: Convert to platform remove callback returning void
memory: emif: Convert to platform remove callback returning void
memory: brcmstb_memc: Convert to platform remove callback returning void
memory: brcmstb_dpfe: Convert to platform remove callback returning void
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
...
|
|
* clk-rs9:
clk: rs9: Add support for 9FGV0841
clk: rs9: Replace model check with bitshift from chip data
clk: rs9: Limit check to vendor ID in VID register
dt-bindings: clk: rs9: Add 9FGV0841
|
|
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
* clk-zynq:
drivers: clk: zynqmp: update divider round rate logic
drivers: clk: zynqmp: calculate closest mux rate
* clk-xilinx:
clocking-wizard: Add support for versal clocking wizard
dt-bindings: clock: xilinx: add versal compatible
* clk-stm:
dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform
clk: stm32mp1: use stm32mp13 reset driver
clk: stm32mp1: move stm32mp1 clock driver into stm32 directory
|
|
clk-next
* clk-imx:
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
dt-bindings: clock: support i.MX93 ANATOP clock module
* clk-qcom: (41 commits)
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
clk: qcom: gcc-sm8550: Mark RCGs shared where applicable
clk: qcom: gcc-sm8550: use collapse-voting for PCIe GDSCs
clk: qcom: gcc-sm8550: Mark the PCIe GDSCs votable
clk: qcom: gcc-sm8550: Add the missing RETAIN_FF_ENABLE GDSC flag
clk: qcom: camcc-sc8280xp: Prevent error pointer dereference
clk: qcom: videocc-sm8150: Add runtime PM support
clk: qcom: videocc-sm8150: Add missing PLL config property
clk: qcom: videocc-sm8150: Update the videocc resets
dt-bindings: clock: Update the videocc resets for sm8150
clk: qcom: rpmh: Add support for X1E80100 rpmh clocks
clk: qcom: Add Global Clock controller (GCC) driver for X1E80100
dt-bindings: clock: qcom-rpmhcc: Add RPMHCC bindings for X1E80100
dt-bindings: clock: qcom: Add X1E80100 GCC clocks
clk: qcom: Add ECPRICC driver support for QDU1000 and QRU1000
clk: qcom: branch: Add mem ops support for branch2 clocks
...
* clk-amlogic:
clk: meson: g12a: add CSI & ISP gates clocks
clk: meson: g12a: add MIPI ISP clocks
dt-bindings: clock: g12a-clkc: add MIPI ISP & CSI PHY clock ids
clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks
dt-bindings: clk: g12a-clkc: add CTS_ENCL clock ids
* clk-mediatek:
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: brcm,kona-ccu: convert to YAML
dt-bindings: arm: mediatek: move ethsys controller & convert to DT schema
dt-bindings: Remove alt_ref from versal
|
|
'clk-sophgo' into clk-next
- Add glitch free PLL setting support to si5351 clk driver
* clk-versa:
clk: versaclock3: Drop ret variable
clk: versaclock3: Add missing space between ')' and '{'
clk: versaclock3: Use u8 return type for get_parent() callback
clk: versaclock3: Avoid unnecessary padding
clk: versaclock3: Update vc3_get_div() to avoid divide by zero
* clk-silabs:
clk: si5351: allow PLLs to be adjusted without reset
dt-bindings: clock: si5351: add PLL reset mode property
dt-bindings: clock: si5351: convert to yaml
* clk-samsung:
clk: samsung: Improve kernel-doc comments
clk: samsung: Fix kernel-doc comments
* clk-starfive:
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
* clk-sophgo:
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
|
|
'clk-cleanup' into clk-next
* clk-renesas:
clk: renesas: r9a08g045: Add clock and reset support for ETH0 and ETH1
clk: renesas: rzg2l: Check reset monitor registers
clk: renesas: r9a08g045: Add IA55 pclk and its reset
clk: renesas: rzg2l-cpg: Reuse code in rzg2l_cpg_reset()
clk: renesas: r8a779g0: Add PCIe clocks
clk: renesas: r8a779g0: Add EtherTSN clock
* clk-rockchip:
clk: rockchip: rk3568: Mark pclk_usb as critical
clk: rockchip: rk3568: Add PLL rate for 126.4MHz
clk: rockchip: rk3568: Add PLL rate for 115.2MHz
* clk-allwinner:
clk: sunxi-ng: nkm: remove redundant initialization of tmp_parent
* clk-cleanup:
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: si5341: fix an error code problem in si5341_output_clk_set_rate
clk: microchip: mpfs-ccc: replace include of asm-generic/errno-base.h
clk: rs9: Fix DIF OEn bit placement on 9FGV0241
clk: mmp: pxa168: Fix memory leak in pxa168_clk_init()
clk: hi3620: Fix memory leak in hi3620_mmc_clk_init()
clk: sp7021: fix return value check in sp7021_clk_probe()
|
|
Add APMIXED, ETH, INFRACFG and TOPCKGEN clock drivers which are
typical MediaTek designs.
Also add driver for XFIPLL clock generating the 156.25MHz clock for
the XFI SerDes. It needs an undocumented software workaround and has
an unknown internal design.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/c7574d808e2da1a530182f0fd790c1337c336e1b.1702849494.git.daniel@makrotopia.org
[sboyd@kernel.org: Add module license to infracfg file]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Introduce pcw_chg_bit member to struct mtk_pll_data and use it instead
of the previously hardcoded PCW_CHG_MASK macro if set.
This will needed for clocks on the MT7988 SoC.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/3b9c65ddb08c8bedf790aacf29871af026b6f0b7.1702849494.git.daniel@makrotopia.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The top_dp and top_edp muxes can be both parented to either TVDPLL1
or TVDPLL2, two identically specced PLLs for the specific purpose of
giving out pixel clock: this becomes a problem when the MediaTek
DisplayPort Interface (DPI) driver tries to set the pixel clock rate.
In the usecase of two simultaneous outputs (using two controllers),
it was seen that one of the displays would sometimes display garbled
output (if any at all) and this was because:
- top_edp was set to TVDPLL1, outputting X GHz
- top_dp was set to TVDPLL2, outputting Y GHz
- mtk_dpi calls clk_set_rate(top_edp, Z GHz)
- top_dp is switched to TVDPLL1
- TVDPLL1 changes its rate, top_edp outputs the wrong rate.
- eDP display is garbled
To solve this issue, remove all TVDPLL1 parents from `top_dp` and
all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
able to use the right bit index for the new parents list.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103102533.69280-4-angelogioacchino.delregno@collabora.com
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The top_dp and top_edp muxes can be both parented to either TVDPLL1
or TVDPLL2, two identically specced PLLs for the specific purpose of
giving out pixel clock: this becomes a problem when the MediaTek
DisplayPort Interface (DPI) driver tries to set the pixel clock rate.
In the usecase of two simultaneous outputs (using two controllers),
it was seen that one of the displays would sometimes display garbled
output (if any at all) and this was because:
- top_edp was set to TVDPLL1, outputting X GHz
- top_dp was set to TVDPLL2, outputting Y GHz
- mtk_dpi calls clk_set_rate(top_edp, Z GHz)
- top_dp is switched to TVDPLL1
- TVDPLL1 changes its rate, top_edp outputs the wrong rate.
- eDP display is garbled
To solve this issue, remove all TVDPLL1 parents from `top_dp` and
all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
able to use the right bit index for the new parents list.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103102533.69280-3-angelogioacchino.delregno@collabora.com
Reviewed-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add support for customized parent indices for MediaTek muxes: this is
necessary for the case in which we want to exclude some clocks from
a mux's parent clocks list, where the exclusions are not from the
very bottom of the list but either in the middle or the beginning.
Example:
- MUX1 (all parents)
- parent1; idx=0
- parent2; idx=1
- parent3; idx=2
- MUX1 (wanted parents)
- parent1; idx=0
- parent3; idx=2
To achieve that add a `parent_index` array pointer to struct mtk_mux,
then in .set_parent(), .get_parent() callbacks check if this array
was populated and eventually get the index from that.
Also, to avoid updating all clock drivers for all SoCs, rename the
"main" macro to __GATE_CLR_SET_UPD_FLAGS (so, `__` was added) and
add the new member to it; furthermore, GATE_CLK_SET_UPD_FLAGS has
been reintroduced as being fully compatible with the older version.
The new parent_index can be specified with the new `_INDEXED`
variants of the MUX_GATE_CLR_SET_UPD_xxxx macros.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103102533.69280-2-angelogioacchino.delregno@collabora.com
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This is needed by the dwmac-starfive ethernet driver to set the clock
for 1000, 100 and 10 Mbps links properly.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231219232442.2460166-3-cristian.ciocaltea@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This flag is needed to add the CLK_SET_RATE_PARENT flag on the gmac_tx
clock on the JH7100, which in turn is needed by the dwmac-starfive
driver to set the clock properly for 1000, 100 and 10 Mbps links.
This change was mostly made using coccinelle:
@ match @
expression idx, name, nparents;
@@
JH71X0__MUX(
-idx, name, nparents,
+idx, name, 0, nparents,
...)
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231219232442.2460166-2-cristian.ciocaltea@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
pll14xx_calc_rate() output the fout clock not the fvco clock
The relation of fvco and fout is:
fout = fvco / (1 << sdiv)
So use correct naming for the clock.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/1703068389-6130-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
To be compatible with SCU firmware based on 1.15 a different clock
routing for LVDS is needed.
Signed-off-by: Oliver F. Brown <oliver.brown@oss.nxp.com>
Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20231218122407.2757175-1-alexander.stein@ew.tq-group.com/
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
In cases where imx_clk_is_resource_owned() returns false, the code path
does not handle the failure gracefully, potentially leading to a memory
leak. This fix ensures proper cleanup by freeing the allocated memory
for 'clk_node' before returning.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/all/20231210171907.3410922-1-visitorckw@gmail.com/
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
These values were missing. Add them.
Fixes: 9e939f008338 ("clk: qcom: add the SM8650 Display Clock Controller driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231219-topic-8650_clks-v1-2-5672bfa0eb05@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
These values were missing. Add them.
Fixes: 8676fd4f3874 ("clk: qcom: add the SM8650 GPU Clock Controller driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231219-topic-8650_clks-v1-1-5672bfa0eb05@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
To ensure that all fields (particularly CAL_L and CAL_L_RINGOSC) are
filled properly, use the correct prepare function for OLE PLLs.
Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-9-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The settings in the driver seem to have been taken from an older
release. Update them to match the latest values.
Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-8-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The settings in the driver seem to have been taken from an older
release. Update them to match the latest values.
Fixes: bfae40744b33 ("clk: qcom: gpucc-sm8550: Add support for graphics clock controller")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-7-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The vast majority of shared RCGs were not marked as such. Fix it.
Fixes: 955f2ea3b9e9 ("clk: qcom: Add GCC driver for SM8550")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-6-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The PCIe GDSCs can be shared with other masters and should use the APCS
collapse-vote register when updating the power state.
This is specifically also needed to be able to disable power domains
that have been enabled by boot firmware using the vote register.
Following other recent Qualcomm platforms, describe this register and
the corresponding mask for the PCIe (and _phy) GDSCs.
Fixes: 955f2ea3b9e9 ("clk: qcom: Add GCC driver for SM8550")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-5-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The PCIe GDSCs on most Qualcomm platforms expect the OS to always
consider collapse requests as successful. This also concerns SM8550.
Add the VOTABLE flag to the GDSCs in question to comply with these
expectations.
Fixes: 955f2ea3b9e9 ("clk: qcom: Add GCC driver for SM8550")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-4-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All of the 8550's GCC GDSCs can and should use the retain registers so
as not to lose their state when entering lower power modes.
Fixes: 955f2ea3b9e9 ("clk: qcom: Add GCC driver for SM8550")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-3-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The gs101 clock defines from the bindings header are derived from the
clock register names found in the datasheet under some certain rules.
The CMU TOP gate clock defines missed to include the required "CMU"
differentiator which will cause collisions with the gate clock defines
of other clock units. Rename the TOP gate clock defines to include "CMU".
Update the clock driver to use the new defines in order to not break
compilation and bisect-ability. There are no device trees that use the
previous defines.
Fixes: 0a910f160638 ("dt-bindings: clock: Add Google gs101 clock management unit bindings")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231218064333.479885-1-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Introduce a new PLL reset mode flag which controls whether or not to
reset a PLL after adjusting its rate. The mode can be configured through
platform data or device tree.
Since commit 6dc669a22c77 ("clk: si5351: Add PLL soft reset"), the
driver unconditionally resets a PLL whenever its rate is adjusted.
The rationale was that a PLL reset was required to get three outputs
working at the same time. Before this change, the driver never reset the
PLLs.
Commit b26ff127c52c ("clk: si5351: Apply PLL soft reset before enabling
the outputs") subsequently introduced an option to reset the PLL when
enabling a clock output that sourced it. Here, the rationale was that
this is required to get a deterministic phase relationship between
multiple output clocks.
This clearly shows that it is useful to reset the PLLs in applications
where multiple clock outputs are used. However, the Si5351 also allows
for glitch-free rate adjustment of its PLLs if one avoids resetting the
PLL. In our audio application where a single Si5351 clock output is used
to supply a runtime adjustable bit clock, this unconditional PLL reset
behaviour introduces unwanted glitches in the clock output.
It would appear that the problem being solved in the former commit
may be solved by using the optional device tree property introduced in
the latter commit, obviating the need for an unconditional PLL reset
after rate adjustment. But it's not OK to break the default behaviour of
the driver, and it cannot be assumed that all device trees are using the
property introduced in the latter commit. Hence, the new behaviour is
made opt-in.
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Cc: Jacob Siverskog <jacob@teenage.engineering>
Cc: Sergej Sawazki <sergej@taudac.com>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Link: https://lore.kernel.org/r/20231124-alvin-clk-si5351-no-pll-reset-v6-3-69b82311cb90@bang-olufsen.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
regmap_bulk_write() return zero or negative error code, return the value
of regmap_bulk_write() rather than '0'.
Fixes: 3044a860fd09 ("clk: Add Si5341/Si5340 driver")
Acked-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231101031633.996124-1-suhui@nfschina.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Drop ret variable from vc3_clk_mux_determine_rate().
While at it, return the value returned by regmap_*
wherever possible instead of returning 0.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20231122142310.203169-6-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add missing space between ')' and '{' for hw.init initialization.
While at it, update the macro VC3_PLL1_LOOP_FILTER_N_DIV_MSB
0x0a->0xa.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20231122142310.203169-5-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The return type of get_parent() member in struct clk_ops is u8.
Use same return type for corresponding callback function as well.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20231122142310.203169-4-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Move long/pointer variables at the beginning of struct to avoid
unnecessary padding.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20231122142310.203169-3-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Update vc3_get_div() to avoid divide by zero operation on
vc3_div_round_rate() by returning1, if there is no table match
found.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20231122142310.203169-2-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
STM32MP15 is now using the same reset driver as STM32MP13 as they
have the same binding requirement.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Link: https://lore.kernel.org/r/20231208143700.354785-3-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Move all STM32MP clock drivers into same directory (stm32).
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Link: https://lore.kernel.org/r/20231208143700.354785-2-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This model is similar to 9FGV0441, the DIFx bits start at bit 0 again,
except this chip has 8 outputs.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20231113221949.111964-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Adjust rs9_calc_dif() to special-case the 9FGV0241 where DIFx bits
start at 1, encode this shift into chip data and drop the model
check entirely.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20231113221949.111964-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Extract only vendor ID from VID register, the top 4 bits are
revision ID which are not useful for the vendor ID check.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20231113221949.111964-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add support for Clocking Wizard for Versal adaptive compute
acceleration platforms. The Versal clocking wizard differs
in the programming model and the register layout.
The CLKFBOUT_1 registers are at offset of 0x200
instead of the 0x330 in Versal. In Versal clocking wizard the low and
high time is programmed instead of the divisor.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20231214105125.26919-3-shubhrajyoti.datta@amd.com
[sboyd@kernel.org: Stop initializing spinlock flags]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
As evidenced by the fact that only 2 other drivers include this header,
it is not a normal thing to do. Including the regular version of this
header is far more conventional for drivers.
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231214-dipper-earshot-72eef3059961@spud
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
On 9FGV0241, the DIF OE0 is BIT(1) and DIF OE1 is BIT(2), on the other
chips like 9FGV0441 and 9FGV0841 DIF OE0 is BIT(0) and so on. Increment
the index in BIT() macro instead of the result of BIT() macro to shift
the bit correctly on 9FGV0241.
Fixes: 603df193ec51 ("clk: rs9: Support device specific dif bit calculation")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20231105200642.62792-1-marek.vasut+renesas@mailbox.org
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|