summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds113-3040/+6985
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-07-16Merge tag 'mfd-next-5.3' of ↵Linus Torvalds3-15/+88
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Set 'struct device' fwnode when registering a new device New Drivers: - Add support for ROHM BD70528 PMIC New Device Support: - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC - Add support for RK809 and RK817 to Rockchip RK808 - Add support for Lid Angle to ChromeOS core - Add support for CS47L15 CODEC to Madera core - Add support for CS47L92 CODEC to Madera core - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core - Add support for Add Intel Elkhart Lake PCH to Intel LPSS New Functionality: - Provide regulator supply information when registering; madera-core - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic - Allow over-riding power button press via Device Tree; rohm-bd718x7 - Differentiate between running processors; cros_ec_dev Fix-ups: - Big header file update; cros_ec_commands.h - Split header per-subsystem; rohm-bd718x7 - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables - Trivial; sorting, coding style; intel-lpss-pci - Only remove Power Off functionality if set locally; rk808 - Make use for Power Off Prepare(); rk808 - Fix spelling mistake in header guards; stmfx - Properly free IDA resources - SPDX fixups; cs47lXX-tables, madera - Error path fixups; hi655x-pmic Bug Fixes: - Add missing break in case() statement - Repair undefined behaviour when not initialising variables; arizona-core, madera-core - Fix reference to Device Tree documentation; madera" * tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits) mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk mfd: madera: Fixup SPDX headers mfd: madera: Remove some unused registers and fix some defaults mfd: intel-lpss: Release IDA resources mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs mfd: cs5535-mfd: Remove ifdef OLPC noise mfd: stmfx: Fix macro definition spelling dt-bindings: mfd: Add link to ROHM BD71847 Datasheet MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice mfd: rk808: Prepare rk805 for poweroff mfd: rk808: Check pm_power_off pointer mfd: cros_ec: differentiate SCP from EC by feature bit dt-bindings: Add binding for cros-ec-rpmsg mfd: madera: Add Madera core support for CS47L92 mfd: madera: Add Madera core support for CS47L15 mfd: madera: Update DT bindings to add additional CODECs mfd: madera: Add supply mapping for MICVDD mfd: madera: Fix potential uninitialised use of variable mfd: madera: Fix bad reference to pinctrl.txt file ...
2019-07-12Merge branches 'clk-bcm63xx', 'clk-silabs', 'clk-lochnagar' and ↵Stephen Boyd16-175/+1810
'clk-rockchip' into clk-next - Support gated clk controller on MIPS based BCM63XX SoCs - Small frequency support for SiLabs Si544 chips - Support SiLabs Si5341 and Si5340 chips * clk-bcm63xx: clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings * clk-silabs: clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support * clk-lochnagar: clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: lochnagar: Use new parent_data approach to register clock parents * clk-rockchip: clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: rockchip: convert pclk_wdt boilerplat to new SGRF_GATE macro clk: rockchip: add a type from SGRF-controlled gate clocks clk: rockchip: Remove 48 MHz PLL rate from rk3288 clk: rockchip: add 1.464GHz cpu-clock rate to rk3228 clk: rockchip: Slightly more accurate math in rockchip_mmc_get_phase() clk: rockchip: Don't yell about bad mmc phases when getting clk: rockchip: Use clk_hw_get_rate() in MMC phase calculation
2019-07-12Merge branches 'clk-rpi-cpufreq', 'clk-tegra', 'clk-simplify-provider.h', ↵Stephen Boyd16-106/+571
'clk-sprd' and 'clk-at91' into clk-next - Support for CPU clks on Raspberry Pi devices - Slow clk support for AT91 SAM9X60 SoCs * clk-rpi-cpufreq: clk: raspberrypi: register platform device for raspberrypi-cpufreq firmware: raspberrypi: register clk device clk: bcm283x: add driver interfacing with Raspberry Pi's firmware clk: bcm2835: remove pllb * clk-tegra: clk: tegra: Do not enable PLL_RE_VCO on Tegra210 clk: tegra: Warn if an enabled PLL is in IDDQ clk: tegra: Do not warn unnecessarily clk: tegra210: fix PLLU and PLLU_OUT1 * clk-simplify-provider.h: clk: consoldiate the __clk_get_hw() declarations clk: Unexport __clk_of_table clk: Remove ifdef for COMMON_CLK in clk-provider.h * clk-sprd: clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: sprd: Check error only for devm_regmap_init_mmio() clk: sprd: Switch from of_iomap() to devm_ioremap_resource() * clk-at91: clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: at91: sckc: add support for SAM9X60 dt-bindings: clk: at91: add bindings for SAM9X60's slow clock controller clk: at91: sckc: add support to specify registers bit offsets clk: at91: sckc: sama5d4 has no bypass support
2019-07-12Merge branches 'clk-debugfs', 'clk-unused', 'clk-refactor' and 'clk-qoriq' ↵Stephen Boyd9-194/+30
into clk-next - Add a 'clk_parent' file in clk debugfs - Remove dead code in various clk drivers * clk-debugfs: clk: Add clk_parent entry in debugfs * clk-unused: clk: qcom: Fix -Wunused-const-variable clk: mmp: frac: Remove set but not used variable 'prev_rate' clk: ti: Remove unused functions clk: mediatek: mt8516: Remove unused variable * clk-refactor: clk: clk-cdce706: simplify getting the adapter of a client clk: Simplify clk_core_can_round() * clk-qoriq: clk: qoriq: add support for lx2160a
2019-07-12Merge branches 'clk-bulk-optional', 'clk-kirkwood', 'clk-socfpga' and ↵Stephen Boyd5-11/+65
'clk-docs' into clk-next - Add a clk_bulk_get_optional() API (with devm too) - Support for Marvell 98DX1135 SoCs * clk-bulk-optional: clk: Document some devm_clk_bulk*() APIs clk: Add devm_clk_bulk_get_optional() function clk: Add clk_bulk_get_optional() function * clk-kirkwood: clk: kirkwood: Add support for MV98DX1135 dt-bindings: clock: mvebu: Add compatible string for 98dx1135 core clock * clk-socfpga: clk: socfpga: stratix10: fix divider entry for the emac clocks clk: socfpga: stratix10: add additional clocks needed for the NAND IP * clk-docs: clk: Grammar missing "and", Spelling s/statisfied/satisfied/
2019-07-12Merge branches 'clk-ti', 'clk-samsung', 'clk-imx' and 'clk-allwinner' into ↵Stephen Boyd42-2262/+2932
clk-next * clk-ti: clk: ti: Use int to check return value from of_property_count_elems_of_size() firmware: ti_sci: extend clock identifiers from u8 to u32 clk: keystone: sci-clk: extend clock IDs to 32 bits clk: keystone: sci-clk: probe clocks from DT instead of firmware clk: keystone: sci-clk: split out the fw clock parsing to own function clk: keystone: sci-clk: cut down the clock name length * clk-samsung: clk: samsung: Add bus clock for GPU/G3D on Exynos4412 clk: samsung: add new clocks for DMC for Exynos5422 SoC clk: samsung: add BPLL rate table for Exynos 5422 SoC clk: samsung: add needed IDs for DMC clocks in Exynos5420 clk: samsung: exynos5433: Use of_clk_get_parent_count() * clk-imx: (38 commits) clk: imx8mq: Keep uart clocks on during system boot clk: imx: Remove __init for imx_register_uart_clocks() API clk: imx6q: fix section mismatch warning clk: imx8mq: Use devm_platform_ioremap_resource() instead of of_iomap() clk: imx8mq: Use imx_check_clocks() API directly clk: imx: Remove __init for imx_check_clocks() API clk: imx6sll: Switch to clk_hw based API clk: imx7d: Switch to clk_hw based API clk: imx6ul: Switch to clk_hw based API clk: imx6sx: Switch to clk_hw based API clk: imx6q: Switch to clk_hw based API clk: imx6sl: Switch to clk_hw based API clk: imx: Switch wrappers to clk_hw based API clk: imx: clk-fixup-mux: Switch to clk_hw based API clk: imx: clk-fixup-div: Switch to clk_hw based API clk: imx: clk-gate-exclusive: Switch to clk_hw based API clk: imx: clk-pfd: Switch to clk_hw based API clk: imx: clk-pllv3: Switch to clk_hw based API clk: imx: clk-gate2: Switch to clk_hw based API clk: imx: clk-cpu: Switch to clk_hw based API ... * clk-allwinner: (29 commits) clk: Simplify debugfs printing and add a newline clk: sunxi-ng: sun8i-r: Use local parent references for SUNXI_CCU_GATE clk: sunxi-ng: a80-usb: Use local parent references for SUNXI_CCU_GATE clk: sunxi-ng: gate: Add macros for referencing local clock parents clk: sunxi-ng: h6-r: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: h6: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: a64: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: f1c100s: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: sun8i-r: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: v3s: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: r40: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: h3: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: a33: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: a23: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: a31: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: sun5i: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: a10: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: sun8i-r: Use local parent references for CLK_HW_INIT_* clk: sunxi-ng: switch to of_clk_hw_register() for registering clks clk: fixed-factor: Add CLK_FIXED_FACTOR_FW_NAME for DT clock-names parent ...
2019-07-12Merge branches 'clk-qcom-gdsc-warn', 'clk-ingenic', 'clk-qcom-qcs404-reset', ↵Stephen Boyd22-161/+1285
'clk-xgene-limit' and 'clk-meson' into clk-next * clk-qcom-gdsc-warn: clk: qcom: gdsc: WARN when failing to toggle * clk-ingenic: MIPS: Remove dead code clk: ingenic: Remove unused functions MIPS: jz4740: PM: Let CGU driver suspend clocks and set sleep mode clk: ingenic: Handle setting the Low-Power Mode bit clk: ingenic: Add missing header in cgu.h clk: ingenic/jz4725b: Fix "pll half" divider not read/written properly clk: ingenic/jz4725b: Fix incorrect dividers for main clocks clk: ingenic/jz4770: Fix incorrect dividers for main clocks clk: ingenic/jz4740: Fix incorrect dividers for main clocks clk: ingenic: Add support for divider tables * clk-qcom-qcs404-reset: clk: gcc-qcs404: Add PCIe resets * clk-xgene-limit: clk: xgene: Don't build COMMON_CLK_XGENE by default * clk-meson: clk: meson: g12a: mark fclk_div3 as critical clk: meson: g12a: Add support for G12B CPUB clocks dt-bindings: clk: meson: add g12b periph clock controller bindings clk: meson-g12a: add temperature sensor clocks dt-bindings: clk: g12a-clkc: add Temperature Sensor clock IDs clk: meson: meson8b: add the cts_i958 clock clk: meson: meson8b: add the cts_mclk_i958 clocks clk: meson: meson8b: add the cts_amclk clocks dt-bindings: clock: meson8b: add the audio clocks clk: meson: g12a: add controller register init clk: meson: eeclk: add init regs clk: meson: g12a: add mpll register init sequences clk: meson: mpll: add init callback and regs clk: meson: axg: spread spectrum is on mpll2 clk: meson: gxbb: no spread spectrum on mpll0 clk: meson: mpll: properly handle spread spectrum clk: meson: meson8b: fix a typo in the VPU parent names array variable clk: meson: fix MPLL 50M binding id typo
2019-07-12Merge branches 'clk-pwm-duty', 'clk-bcm', 'clk-mtk', 'clk-qcom-msm8998-gpu' ↵Stephen Boyd16-141/+288
and 'clk-renesas' into clk-next - Add support to get duty cycle of generic pwm clks * clk-pwm-duty: clk: pwm: implement the .get_duty_cycle callback * clk-bcm: clk: bcm: Allow CLK_BCM2835 for ARCH_BRCMSTB clk: bcm: Make BCM2835 clock drivers selectable * clk-mtk: clk: mediatek: Remove MT8183 unused clock clk: mediatek: add audsys clock driver for MT8516 dt-bindings: mediatek: audsys: add support for MT8516 * clk-qcom-msm8998-gpu: dt-bindings: clock: Document gpucc for msm8998 * clk-renesas: clk: renesas: cpg-mssr: Use [] to denote a flexible array member clk: renesas: cpg-mssr: Combine driver-private and clock array allocation clk: renesas: mstp: Combine group-private and clock array allocation clk: renesas: div6: Combine clock-private and parent array allocation clk: renesas: cpg-mssr: Update kerneldoc for struct cpg_mssr_priv clk: renesas: r8a774a1: Add TMU clock clk: renesas: r8a77995: Add CMM clocks clk: renesas: r8a77990: Add CMM clocks clk: renesas: r8a77965: Add CMM clocks clk: renesas: r8a7795: Add CMM clocks clk: renesas: r9a06g032: Add clock domain support dt-bindings: clock: renesas: r9a06g032-sysctrl: Document power Domains clk: renesas: mstp: Remove error messages on out-of-memory conditions clk: renesas: cpg-mssr: Remove error messages on out-of-memory conditions clk: renesas: cpg-mssr: Use genpd of_node instead of local copy clk: renesas: r8a7796: Add CMM clocks clk: renesas: r8a779{5|6|65}: Add TPU clock
2019-07-12scripts/spelling.txt: add spelling fix for prohibitedChris Paterson1-1/+1
Misspelling 'prohibited' is quite common in the real world, although surprisingly not so much in the Linux Kernel. In addition to fixing the typo we may as well add it to the spelling checker. Also adding the present participle (prohibiting). Link: http://lkml.kernel.org/r/20190514153341.22540-1-chris.paterson2@renesas.com Fixes: 5bf2fbbef50c ("clk: renesas: cpg-mssr: Add r8a77470 support") Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12clk: consoldiate the __clk_get_hw() declarationsStephen Rothwell7-4/+6
Without this we were getting errors like: In file included from drivers/clk/clkdev.c:22:0: drivers/clk/clk.h:36:23: error: static declaration of '__clk_get_hw' follows non-static declaration include/linux/clk-provider.h:808:16: note: previous declaration of '__clk_get_hw' was here Fixes: 59fcdce425b7 ("clk: Remove ifdef for COMMON_CLK in clk-provider.h") fixes: 73e0e496afda ("clkdev: Always allocate a struct clk and call __clk_get() w/ CCF") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-07-02Merge branches 'ib-mfd-clk-gpio-power-regulator-rtc-5.3', ↵Lee Jones2-6/+67
'ib-mfd-clk-regulator-rtc-5.3', 'ib-mfd-cros-5.3' and 'ib-mfd-regulator-5.3' into ibs-for-mfd-merged
2019-06-28Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds7-13/+18
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A handful of clk driver fixes and one core framework fix - Do a DT/firmware lookup in clk_core_get() even when the DT index is a nonsensical value - Fix some clk data typos in the Amlogic DT headers/code - Avoid returning junk in the TI clk driver when an invalid clk is looked for - Fix dividers for the emac clks on Stratix10 SoCs - Fix default HDA rates on Tegra210 to correct distorted audio" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: socfpga: stratix10: fix divider entry for the emac clocks clk: Do a DT parent lookup even when index < 0 clk: tegra210: Fix default rates for HDA clocks clk: ti: clkctrl: Fix returning uninitialized data clk: meson: meson8b: fix a typo in the VPU parent names array variable clk: meson: fix MPLL 50M binding id typo
2019-06-28clk: sprd: Add check for return value of sprd_clk_regmap_init()Chunyan Zhang1-1/+4
sprd_clk_regmap_init() doesn't always return success, adding check for its return value should make the code more strong. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> [sboyd@kernel.org: Add a missing int ret] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-28clk: Add Si5341/Si5340 driverMike Looijmans3-0/+1358
Adds a driver for the Si5341 and Si5340 chips. The driver does not fully support all features of these chips, but allows the chip to be used without any support from the "clockbuilder pro" software. If the chip is preprogrammed, that is, you bought one with some defaults burned in, or you programmed the NVM in some way, the driver will just take over the current settings and only change them on demand. Otherwise the input must be a fixed XTAL in its most basic configuration (no predividers, no feedback, etc.). The driver supports dynamic changes of multisynth, output dividers and enabling or powering down outputs and multisynths. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> [sboyd@kernel.org: Mark some things static, use BIT_ULL for big bits and ULL for big constants] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: clk-si544: Implement small frequency change supportMike Looijmans1-10/+92
The Si544 supports changing frequencies "on the fly" when the change is less than 950 ppm from the current center frequency. The driver now uses the small adjustment routine for implementing this. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: add BCM63XX gated clock controller driverJonas Gorski3-0/+247
Add a driver for the gated clock controller found on MIPS based BCM63XX SoCs. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [sboyd@kernel.org: Remove module.h include and associated things for a non-modular driver, add static on data tables, drop of_match_ptr() usage, fix spdx tag to be a C++ style comment] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: use dedicated functions to unregister clockClaudiu Beznea1-2/+2
Use at91 specific functions to free all resources in case of error. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: improve error path for sama5d4 sck registrationClaudiu Beznea1-15/+28
Improve error path for sama5d4 sck registration. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: remove unnecessary lineClaudiu Beznea1-1/+0
Remove unnecessary line. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: improve error path for sam9x5 sck registerClaudiu Beznea1-18/+32
Improve error path for sam9x5 slow clock registration. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: add support to free slow clock osclillatorClaudiu Beznea1-0/+8
Add support to free slow clock oscillator resources. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: add support to free slow rc oscillatorClaudiu Beznea1-0/+8
Add support to free slow rc oscillator resources. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: add support to free slow oscillatorClaudiu Beznea1-0/+8
Add support to free slow oscillator resources. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: RK808: Add RK809 and RK817 support.Tony Xie2-6/+67
RK809 and RK817 are power management IC chips for multimedia products. most of their functions and registers are same, including the clkout funciton. Signed-off-by: Tony Xie <tony.xie@rock-chips.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27clk: bd718x7: Support ROHM BD70528 clk blockMatti Vaittinen2-7/+19
ROHM BD70528 is an ultra low power PMIC with similar 32K clk as bd718x7. Only difference (from clk perspective) is register address. Add support for controlling BD70528 clk using bd718x7 driver. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27mfd: regulator: clk: Split rohm-bd718x7.hMatti Vaittinen1-3/+3
Split the bd718x7.h to ROHM common and bd718x7 specific parts so that we do not need to add same things in every new ROHM PMIC header. Please note that this change requires changes also in bd718x7 sub-device drivers for regulators and clk. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27clk: rockchip: export HDMIPHY clock on rk3228Heiko Stuebner1-1/+1
Export the hdmiphy clock mux via the newly added clock-id. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Justin Swartz <justin.swartz@risingedge.co.za>
2019-06-27clk: rockchip: add watchdog pclk on rk3328Heiko Stuebner1-0/+3
The watchdog pclk is controlled from the secure GRF but we still want to mention it explicitly to not use arbitary parent clocks in the devicetree wdt node, so add a SGRF_GATE for it. Suggested-by: Leonidas P. Papadakos <papadakospan@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-26clk: at91: sckc: add support for SAM9X60Claudiu Beznea1-0/+74
Add support for SAM9X60's slow clock. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: at91: sckc: add support to specify registers bit offsetsClaudiu Beznea1-32/+61
Different IPs uses different bit offsets in registers for the same functionality, thus adapt the driver to support this. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: at91: sckc: sama5d4 has no bypass supportClaudiu Beznea1-6/+0
The slow clock of SAMA5D4 has no bypass support thus remove it. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: sprd: Check error only for devm_regmap_init_mmio()Chunyan Zhang1-1/+1
The function devm_regmap_init_mmio() wouldn't return NULL pointer for now, so only need to ensure the return value is not an error code. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: sprd: Switch from of_iomap() to devm_ioremap_resource()Chunyan Zhang1-1/+6
devm_ioremap_resources() automatically requests resources and devm_ wrappers do better error handling and unmapping of the I/O region when needed, that would make drivers more clean and simple. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: lochnagar: Use new parent_data approach to register clock parentsCharles Keepax1-119/+86
Switch over to the more modern style of registering parents and simplify the code in the process. Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: tegra: Do not enable PLL_RE_VCO on Tegra210Thierry Reding1-1/+0
It turns out that this PLL is not used on Tegra210, so there's no need to enable it via the init table. Remove the init table entry for this PLL to avoid it getting enabled at boot time. If the bootloader enabled it and forgot to turn it off, the common clock framework will now know to disable it because it is unused. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: tegra: Warn if an enabled PLL is in IDDQThierry Reding1-1/+5
A PLL in IDDQ doesn't work, whether it's enabled or not. This is not a configuration that makes sense, so warn about it. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: tegra: Do not warn unnecessarilyThierry Reding1-2/+3
There is no need to warn if the reference PLL is enabled with the correct defaults. Only warn if the boot values don't match the defaults. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: tegra210: fix PLLU and PLLU_OUT1JC Kuo1-4/+4
Full-speed and low-speed USB devices do not work with Tegra210 platforms because of incorrect PLLU/PLLU_OUT1 clock settings. When full-speed device is connected: [ 14.059886] usb 1-3: new full-speed USB device number 2 using tegra-xusb [ 14.196295] usb 1-3: device descriptor read/64, error -71 [ 14.436311] usb 1-3: device descriptor read/64, error -71 [ 14.675749] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 14.812335] usb 1-3: device descriptor read/64, error -71 [ 15.052316] usb 1-3: device descriptor read/64, error -71 [ 15.164799] usb usb1-port3: attempt power cycle When low-speed device is connected: [ 37.610949] usb usb1-port3: Cannot enable. Maybe the USB cable is bad? [ 38.557376] usb usb1-port3: Cannot enable. Maybe the USB cable is bad? [ 38.564977] usb usb1-port3: attempt power cycle This commit fixes the issue by: 1. initializing PLLU_OUT1 before initializing XUSB_FS_SRC clock because PLLU_OUT1 is parent of XUSB_FS_SRC. 2. changing PLLU post-divider to /2 (DIVP=1) according to Technical Reference Manual. Fixes: e745f992cf4b ("clk: tegra: Rework pll_u") Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: raspberrypi: register platform device for raspberrypi-cpufreqNicolas Saenz Julienne1-0/+15
As 'clk-raspberrypi' depends on RPi's firmware interface, which might be configured as a module, the cpu clock might not be available for the cpufreq driver during it's init process. So we register the 'raspberrypi-cpufreq' platform device after the probe sequence succeeds. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: bcm283x: add driver interfacing with Raspberry Pi's firmwareNicolas Saenz Julienne3-0/+308
Raspberry Pi's firmware offers an interface though which update it's clock's frequencies. This is specially useful in order to change the CPU clock (pllb_arm) which is 'owned' by the firmware and we're unable to scale using the register interface provided by clk-bcm2835. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: bcm2835: remove pllbNicolas Saenz Julienne1-24/+4
Raspberry Pi's firmware controls this pll, we should use the firmware interface to access it. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: qoriq: add support for lx2160aVabhav Sharma1-0/+12
Add clockgen support and configuration for NXP SoC lx2160a with compatible property as "fsl,lx2160a-clockgen". Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Acked-by: Scott Wood <oss@buserror.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: clk-cdce706: simplify getting the adapter of a clientWolfram Sang1-1/+1
We have a dedicated pointer for that, so use it. Much easier to read and less computation involved. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: qcom: Fix -Wunused-const-variableNathan Huckleberry1-36/+0
Clang produces the following warning drivers/clk/qcom/gcc-msm8996.c:133:32: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div_map' [-Wunused-const-variable] static const struct parent_map gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div_map[] = { ^drivers/clk/qcom/gcc-msm8996.c:141:27: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div' [-Wunused-const-variable] static const char * const gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div[] = { ^ drivers/clk/qcom/gcc-msm8996.c:187:32: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div_map' [-Wunused-const-variable] static const struct parent_map gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div_map[] = { ^ drivers/clk/qcom/gcc-msm8996.c:197:27: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div' [-Wunused-const-variable] static const char * const gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div[] = { It looks like these were never used. Fixes: b1e010c0730a ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver") Cc: clang-built-linux@googlegroups.com Link: https://github.com/ClangBuiltLinux/linux/issues/518 Suggested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: ingenic: Remove unused functionsPaul Cercueil1-73/+0
These functions are not called anywhere anymore, they can safely be removed. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: ingenic: Handle setting the Low-Power Mode bitPaul Cercueil7-32/+69
The Low-Power Mode, when enabled, will make the "wait" MIPS instruction suspend the system. This is not really clock-related, but this bit happens to be in the register set of the CGU. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: ingenic: Add missing header in cgu.hPaul Cercueil1-0/+1
The cgu.h has structures that contain 'clk_onecell_data' and 'clk_hw' structures (no pointers), so the <linux/clk-provider.h> header should be included. Signed-off-by: Paul Cercueil <paul@crapouillou.net> [sboyd@kernel.org: Drop removal of includes in drivers] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: Add clk_parent entry in debugfsLeonard Crestez1-0/+15
This allows to easily determine the parent in shell scripts without parsing more complex files. Add the clk_parent file for all clks which can have a parent, not just muxes. This way it can be used to determine the clk tree structure without parsing more complex files. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: Grammar missing "and", Spelling s/statisfied/satisfied/Geert Uytterhoeven1-2/+2
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>