summaryrefslogtreecommitdiff
path: root/drivers/clocksource/h8300_timer8.c
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLAREDaniel Lezcano1-1/+1
The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the clocksource at early stage. However, this macro is also used to initialize the clockevent if any, or the clockevent only. It was originally suggested to declare another macro to initialize a clockevent, so in order to separate the two entities even they belong to the same IP. This was not accepted because of the impact on the DT where splitting a clocksource/clockevent definition does not make sense as it is a Linux concept not a hardware description. On the other side, the clocksource has not interrupt declared while the clockevent has, so it is easy from the driver to know if the description is for a clockevent or a clocksource, IOW it could be implemented at the driver level. So instead of dealing with a named clocksource macro, let's use a more generic one: TIMER_OF_DECLARE. The patch has not functional changes. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23clocksource: h8300_timer8: Don't reset rate in ->set_state_oneshot()Nicolai Stange1-8/+0
With the upcoming NTP correction related rate adjustments to be implemented in the clockevents core, the latter needs to get informed about every rate change of a clockevent device made after its registration. Currently, h8300_timer8 violates this requirement in that it registers its clockevent device with the correct rate, but resets its ->mult and ->rate values in timer8_clock_event_start(), called from its ->set_state_oneshot() function. It seems like commit 4633f4cac85a ("clocksource/drivers/h8300: Cleanup startup and remove module code."), which introduced the rate initialization at registration, missed to remove the manual setting of ->mult and ->shift from timer8_clock_event_start(). Purge the setting of ->mult, ->shift, ->min_delta_ns and ->max_delta_ns from timer8_clock_event_start(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-06-28clocksources: Switch back to the clksrc tableDaniel Lezcano1-1/+1
All the clocksource drivers's init function are now converted to return an error code. CLOCKSOURCE_OF_DECLARE is no longer used as well as the clksrc-of table. Let's convert back the names: - CLOCKSOURCE_OF_DECLARE_RET => CLOCKSOURCE_OF_DECLARE - clksrc-of-ret => clksrc-of Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> For exynos_mct and samsung_pwm_timer: Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> For arch/arc: Acked-by: Vineet Gupta <vgupta@synopsys.com> For mediatek driver: Acked-by: Matthias Brugger <matthias.bgg@gmail.com> For the Rockchip-part Acked-by: Heiko Stuebner <heiko@sntech.de> For STi : Acked-by: Patrice Chotard <patrice.chotard@st.com> For the mps2-timer.c and versatile.c changes: Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> For the OXNAS part : Acked-by: Neil Armstrong <narmstrong@baylibre.com> For LPC32xx driver: Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> For Broadcom Kona timer change: Acked-by: Ray Jui <ray.jui@broadcom.com> For Sun4i and Sun5i: Acked-by: Chen-Yu Tsai <wens@csie.org> For Meson6: Acked-by: Carlo Caione <carlo@caione.org> For Keystone: Acked-by: Santosh Shilimkar <ssantosh@kernel.org> For NPS: Acked-by: Noam Camus <noamca@mellanox.com> For bcm2835: Acked-by: Eric Anholt <eric@anholt.net>
2016-06-28clocksource/drivers/h8300_timer8: Convert init function to return errorDaniel Lezcano1-5/+8
The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-16clocksource/drivers/h8300: Use ioread / iowriteYoshinori Sato1-11/+17
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-16clocksource/drivers/h8300: Initializer cleanup.Yoshinori Sato1-9/+6
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-16clocksource/drivers/h8300: Simplify delta handlingYoshinori Sato1-34/+6
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15h8300: Rename ctlr_out/in[bwl] to raw_read/write[bwl]Daniel Lezcano1-17/+17
For the sake of consistency, let rename all ctrl_out/in calls to the write/read calls so we have the same API consistent with the other architectures hence open the door for the increasing of the test compilation coverage. The unsigned long coercive cast is removed because all variables are set to the right type "void __iomem *". Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer8: Retrieve the clock rate at init timeDaniel Lezcano1-12/+14
The current code retrieves the rate value when the timer is enabled which occurs each time a timer is re-armed. Except if the clock frequency has changed magically I don't see why this should be done each time. Retrieve the clock rate value at init time only. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer8: Remove irq and lock legacy codeDaniel Lezcano1-16/+0
The time framawork takes care of disabling the interrupts and takes a lock to prevent races. Remove the legacy code in the driver taking care of the races. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer8: Remove pointless irq re-entrant safe codeDaniel Lezcano1-9/+6
The current code assumes the interrupt function is re-entrant. That is not correct. An interrupt handler is never invoked concurrently. The interrupt line is masked on all processors. Remove the chewing flags in the code. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer8: Fix irq return value checkDaniel Lezcano1-1/+1
The value returned in case of error for the 'irq_of_parse_and_map' function is zero in case of error. Fix the check in the init code. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer8: Remove PERIODIC and ONESHOT macroDaniel Lezcano1-7/+4
Specify the delta as parameter for the timer8_clock_event_start function instead of using a macro to tell PERIODIC or ONESHOT. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer8: Remove unused macrosDaniel Lezcano1-4/+0
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer8: Remove unused headersDaniel Lezcano1-5/+0
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer8: Fix compilation error with dev_warnDaniel Lezcano1-1/+1
The dev_warn is using the platform driver which was removed in the previous patch. Let's replace dev_warn by pr_warn. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300: Cleanup startup and remove module code.Yoshinori Sato1-99/+51
Remove some legacy code and replace it by the clksrc-of code. Do some cleanup and code consolidation. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-10-15clocksource/drivers/h8300_*: Remove unneeded memset()sAlexey Klimov1-1/+0
Memory for timer16_priv, timer8_priv and tpu_priv structs is allocated by devm_kzalloc() in corresponding probe functions of drivers. No need to zero it one more time. Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-08-10clockevents/drivers/h8300_timer8: Migrate to new 'set-state' interfaceViresh Kumar1-23/+28
Migrate h8300_timer8 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-23h8300: fix typo.Yoshinori Sato1-1/+1
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2015-06-23h8300: clocksourceYoshinori Sato1-0/+313
h8300_timer8: 8bit clockevent device h8300_timer16 / h8300_tpu: 16bit clocksource Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>