| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230310144702.1541660-1-robh@kernel.org
|
|
Clean-up commit b6999fa1c847 ("clocksource/drivers/timer-ti-dm: Use
of_address_to_resource()") caused a regression where pa is never set
making all related SoCs fail to boot. Let's fix this by setting pa
if found.
Fixes: b6999fa1c847 ("clocksource/drivers/timer-ti-dm: Use of_address_to_resource()")
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230412064142.12726-1-tony@atomide.com
|
|
init fails
Smatch reports:
drivers/clocksource/timer-davinci.c:332 davinci_timer_register()
warn: 'base' from ioremap() not released on lines: 274.
Fix this and other potential memory leak problems
by adding a set of corresponding exit lables.
Fixes: 721154f972aa ("clocksource/drivers/davinci: Add support for clockevents")
Signed-off-by: Qinrun Dai <flno@hust.edu.cn>
Link: https://lore.kernel.org/r/20230413135037.1505799-1-flno@hust.edu.cn
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/clocksource/timer-stm32-lp.c:203:34: error: ‘stm32_clkevent_lp_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230311173803.263446-1-krzysztof.kozlowski@linaro.org
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230313075430.2730803-6-u.kleine-koenig@pengutronix.de
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230313075430.2730803-5-u.kleine-koenig@pengutronix.de
|
|
If a platform driver's remove callback returns an error code, the driver
core emits a generic (and thus little helpful) error message.
Instead emit a more specifc error message about the actual error and
return zero to suppress the core's message.
Note that returning zero has no side effects apart from not emitting
said error message. This prepares converting platform driver's remove
message to return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230313075430.2730803-4-u.kleine-koenig@pengutronix.de
|
|
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind an stm32-lp device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
[dlezcano] : Fixed up the wrong function removed
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230313075430.2730803-3-u.kleine-koenig@pengutronix.de
|
|
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind a sh_tmu2 device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230313075430.2730803-2-u.kleine-koenig@pengutronix.de
|
|
Replace of_get_address() and of_translate_address() calls with single
call to of_address_to_resource().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230319163220.226273-1-robh@kernel.org
|
|
mxc_timer_init() was originally only used by non-DT i.MX platforms.
i.MX has already been converted to be a DT-only platform.
Remove the unused mxc_timer_init() function.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230307124313.708255-1-festevam@denx.de
|
|
On MediaTek platforms, CPUXGPT is the source for the AArch64 System
Timer, read through CNTVCT_EL0.
The handling for starting this timer ASAP was introduced in commit
327e93cf9a59 ("clocksource/drivers/timer-mediatek: Implement CPUXGPT timers")
which description also contains an important full explanation of the
reasons why this driver is necessary and cannot be a module.
In preparation for an eventual conversion of timer-mediatek to a
platform_driver that would be possibly built as a module, split out
the CPUXGPT timers driver to a new timer-mediatek-cpux.c driver.
This commit brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Walter Chang <walter.chang@mediatek.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230309103913.116775-1-angelogioacchino.delregno@collabora.com
|
|
For a shared timers, the mct_init_dt() should not initialize the clock
even with global comparator. This is not an error, thus the function
should simply return 0, not 'ret'.
This also fixes smatch warning:
drivers/clocksource/exynos_mct.c:635 mct_init_dt() warn: missing error code? 'ret'
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202304021446.46XVKag0-lkp@intel.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230403094017.9556-1-krzysztof.kozlowski@linaro.org
|
|
If Hyper-V TSC page is unavailable and Invariant-TSC is available,
currently hyperv_cs_msr (rather than Invariant-TSC) is used by default.
Use Invariant-TSC by default by downgrading hyperv_cs_msr.rating in
hv_init_tsc_clocksource(), if Invariant-TSC is available.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230408210339.15085-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Add a placeholder function for the hv_setup_stimer0_irq API to accommodate
systems without ACPI support. Since this function is not utilized on
x86/x64 systems and non-ACPI support is only intended for x86/x64 systems,
a placeholder function is sufficient for now and can be improved upon if
necessary in the future.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1679298460-11855-2-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Removing include of cpu.h from of_device.h (included by of_platform.h)
causes an error in ingenic-timer:
drivers/clocksource/ingenic-timer.c: In function ‘ingenic_tcu_init’:
drivers/clocksource/ingenic-timer.c:338:15: error: implicit declaration of function ‘cpuhp_setup_state’
The of_platform.h header is not necessary either, so it and of_address.h
can be dropped.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-11-581e2605fe47@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
To do remote FENCEs (i.e. remote TLB flushes) using IPI calls on the
RISC-V kernel, we need hardware mechanism to directly inject IPI from
the supervisor mode (i.e. RISC-V kernel) instead of using SBI calls.
The upcoming AIA IMSIC devices allow direct IPI injection from the
supervisor mode (i.e. RISC-V kernel). To support this, we extend the
riscv_ipi_set_virq_range() function so that IPI provider (i.e. irqchip
drivers can mark IPIs as suitable for remote FENCEs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-5-apatel@ventanamicro.com
|
|
Currently, the RISC-V kernel provides arch specific hooks (i.e.
struct riscv_ipi_ops) to register IPI handling methods. The stats
gathering of IPIs is also arch specific in the RISC-V kernel.
Other architectures (such as ARM, ARM64, and MIPS) have moved away
from custom arch specific IPI handling methods. Currently, these
architectures have Linux irqchip drivers providing a range of Linux
IRQ numbers to be used as IPIs and IPI triggering is done using
generic IPI APIs. This approach allows architectures to treat IPIs
as normal Linux IRQs and IPI stats gathering is done by the generic
Linux IRQ subsystem.
We extend the RISC-V IPI handling as-per above approach so that arch
specific IPI handling methods (struct riscv_ipi_ops) can be removed
and the IPI handling is done through the Linux IRQ subsystem.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-4-apatel@ventanamicro.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timekeeping, timers and clockevent/source drivers:
Core:
- Yet another round of improvements to make the clocksource watchdog
more robust:
- Relax the clocksource-watchdog skew criteria to match the NTP
criteria.
- Temporarily skip the watchdog when high memory latencies are
detected which can lead to false-positives.
- Provide an option to enable TSC skew detection even on systems
where TSC is marked as reliable.
Sigh!
- Initialize the restart block in the nanosleep syscalls to be
directed to the no restart function instead of doing a partial
setup on entry.
This prevents an erroneous restart_syscall() invocation from
corrupting user space data. While such a situation is clearly a
user space bug, preventing this is a correctness issue and caters
to the least suprise principle.
- Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout()
to align it with the nanosleep semantics.
Drivers:
- The obligatory new driver bindings for Mediatek, Rockchip and
RISC-V variants.
- Add support for the C3STOP misfeature to the RISC-V timer to handle
the case where the timer stops in deeper idle state.
- Set up a static key in the RISC-V timer correctly before first use.
- The usual small improvements and fixes all over the place"
* tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/timer-sun4i: Add CLOCK_EVT_FEAT_DYNIRQ
clocksource/drivers/em_sti: Mark driver as non-removable
clocksource/drivers/sh_tmu: Mark driver as non-removable
clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use
clocksource/drivers/timer-microchip-pit64b: Add delay timer
clocksource/drivers/timer-microchip-pit64b: Select driver only on ARM
dt-bindings: timer: sifive,clint: add comaptibles for T-Head's C9xx
dt-bindings: timer: mediatek,mtk-timer: add MT8365
clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback
clocksource/drivers/sh_cmt: Mark driver as non-removable
clocksource/drivers/timer-microchip-pit64b: Drop obsolete dependency on COMPILE_TEST
clocksource/drivers/riscv: Increase the clock source rating
clocksource/drivers/timer-riscv: Set CLOCK_EVT_FEAT_C3STOP based on DT
dt-bindings: timer: Add bindings for the RISC-V timer device
RISC-V: time: initialize hrtimer based broadcast clock event device
dt-bindings: timer: rk-timer: Add rktimer for rv1126
time/debug: Fix memory leak with using debugfs_lookup()
clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested
posix-timers: Use atomic64_try_cmpxchg() in __update_gt_cputime()
clocksource: Verify HPET and PMTMR when TSC unverified
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into timers/core
Pull clocksource watchdog changes from Paul McKenney:
o Improvements to clocksource-watchdog console messages.
o Loosening of the clocksource-watchdog skew criteria to match
those of NTP (500 parts per million, relaxed from 400 parts
per million). If it is good enough for NTP, it is good enough
for the clocksource watchdog.
o Suspend clocksource-watchdog checking temporarily when high
memory latencies are detected. This avoids the false-positive
clock-skew events that have been seen on production systems
running memory-intensive workloads.
o On systems where the TSC is deemed trustworthy, use it as the
watchdog timesource, but only when specifically requested using
the tsc=watchdog kernel boot parameter. This permits clock-skew
events to be detected, but avoids forcing workloads to use the
slow HPET and ACPI PM timers. These last two timers are slow
enough to cause systems to be needlessly marked bad on the one
hand, and real skew does sometimes happen on production systems
running production workloads on the other. And sometimes it is
the fault of the TSC, or at least of the firmware that told the
kernel to program the TSC with the wrong frequency.
o Add a tsc=revalidate kernel boot parameter to allow the kernel
to diagnose cases where the TSC hardware works fine, but was told
by firmware to tick at the wrong frequency. Such cases are rare,
but they really have happened on production systems.
Link: https://lore.kernel.org/r/20230210193640.GA3325193@paulmck-ThinkPad-P17-Gen-1
|
|
Add CLOCK_EVT_FEAT_DYNIRQ to allow the IRQ could be runtime set affinity
to the cores that needs wake up, otherwise saying core0 has to send
IPI to wakeup core1. With CLOCK_EVT_FEAT_DYNIRQ set, when broadcast
timer could wake up the cores, IPI is not needed.
After enabling this feature, especially the scene where cpuidle is
enabled can benefit.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230209040239.24710-1-frank.li@vivo.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind a em_sti device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230207193010.469495-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind a sh_tmu device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230207193614.472060-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
A static key is used to select between SBI and Sstc timer usage in
riscv_clock_next_event(), but currently the direction is resolved
after cpuhp_setup_state() is called (which sets the next event). The
first event will therefore fall through the sbi_set_timer() path; this
breaks Sstc-only systems. So, apply the jump patching before first
use.
Fixes: 9f7a8ff6391f ("RISC-V: Prefer sstc extension if available")
Signed-off-by: Matt Evans <mev@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/CDDAB2D0-264E-42F3-8E31-BA210BEB8EC1@rivosinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add delay timer.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230203130537.1921608-3-claudiu.beznea@microchip.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Microchip PIT64B is currently available on ARM based devices. Thus
select it only for ARM. This allows implementing delay timer.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230203130537.1921608-2-claudiu.beznea@microchip.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Having a clocksource_arch_init() callback always sets vdso_clock_mode to
VDSO_CLOCKMODE_ARCHTIMER if GENERIC_GETTIMEOFDAY is enabled, this is
required for the riscv-timer.
This works for platforms where just riscv-timer clocksource is present.
On platforms where other clock sources are available we want them to
register with vdso_clock_mode set to VDSO_CLOCKMODE_NONE.
On the Renesas RZ/Five SoC OSTM block can be used as clocksource [0], to
avoid multiple clock sources being registered as VDSO_CLOCKMODE_ARCHTIMER
move setting of vdso_clock_mode in the riscv-timer driver instead of doing
this in clocksource_arch_init() callback as done similarly for ARM/64
architecture.
[0] drivers/clocksource/renesas-ostm.c
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221229224601.103851-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind a sh_cmt device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230123220221.48164-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
COMPILE_TEST
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230121182911.4e47a5ff@endymion.delvare
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
RISC-V provides an architectural clock source via the time CSR. This
clock source exposes a 64-bit counter synchronized across all CPUs.
Because it is accessed using a CSR, it is much more efficient to read
than MMIO clock sources. For example, on the Allwinner D1, reading the
sun4i timer in a loop takes 131 cycles/iteration, while reading the
RISC-V time CSR takes only 5 cycles/iteration.
Adjust the RISC-V clock source rating so it is preferred over the
various platform-specific MMIO clock sources.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20221228004444.61568-1-samuel@sholland.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
We should set CLOCK_EVT_FEAT_C3STOP for a clock_event_device only
when riscv,timer-cannot-wake-cpu DT property is present in the RISC-V
timer DT node.
This way CLOCK_EVT_FEAT_C3STOP feature is set for clock_event_device
based on RISC-V platform capabilities rather than having it set for
all RISC-V platforms.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230103141102.772228-4-apatel@ventanamicro.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
On systems with two or fewer sockets, when the boot CPU has CONSTANT_TSC,
NONSTOP_TSC, and TSC_ADJUST, clocksource watchdog verification of the
TSC is disabled. This works well much of the time, but there is the
occasional production-level system that meets all of these criteria, but
which still has a TSC that skews significantly from atomic-clock time.
This is usually attributed to a firmware or hardware fault. Yes, the
various NTP daemons do express their opinions of userspace-to-atomic-clock
time skew, but they put them in various places, depending on the daemon
and distro in question. It would therefore be good for the kernel to
have some clue that there is a problem.
The old behavior of marking the TSC unstable is a non-starter because a
great many workloads simply cannot tolerate the overheads and latencies
of the various non-TSC clocksources. In addition, NTP-corrected systems
sometimes can tolerate significant kernel-space time skew as long as
the userspace time sources are within epsilon of atomic-clock time.
Therefore, when watchdog verification of TSC is disabled, enable it for
HPET and PMTMR (AKA ACPI PM timer). This provides the needed in-kernel
time-skew diagnostic without degrading the system's performance.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Waiman Long <longman@redhat.com>
Cc: <x86@kernel.org>
Tested-by: Feng Tang <feng.tang@intel.com>
|
|
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
similar symbols that are no longer available with the platform gone,
though the drivers themselves are still used on newer platforms,
so remove these hacks.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and drivers:
Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and
the work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown timer.
Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync()
should be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding
rearm attempts silently.
A warning for the case that a rearm attempt of a shutdown timer is
detected would not be really helpful because it's entirely unclear
how it should be acted upon. The only way to address such a case is
to add 'if (in_shutdown)' conditionals all over the place. This is
error prone and in most cases of teardown not required all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place"
* tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
dt-bindings: timer: renesas,cmt: Add r8a779g0 CMT support
dt-bindings: timer: renesas,tmu: Add r8a779g0 support
clocksource/drivers/arm_arch_timer: Use kstrtobool() instead of strtobool()
clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
clocksource/drivers/timer-ti-dm: Clear settings on probe and free
clocksource/drivers/timer-ti-dm: Make timer_get_irq static
clocksource/drivers/timer-ti-dm: Fix warning for omap_timer_match
clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error
clocksource/drivers/timer-npcm7xx: Enable timer 1 clock before use
dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
dt-bindings: timer: rockchip: Add rockchip,rk3128-timer
clockevents: Repair kernel-doc for clockevent_delta2ns()
clocksource/drivers/ingenic-ost: Define pm functions properly in platform_driver struct
clocksource/drivers/sh_cmt: Access registers according to spec
vdso/timens: Refactor copy-pasted find_timens_vvar_page() helper into one copy
Bluetooth: hci_qca: Fix the teardown problem for real
timers: Update the documentation to reflect on the new timer_shutdown() API
timers: Provide timer_shutdown[_sync]()
timers: Add shutdown mechanism to the internal functions
timers: Split [try_to_]del_timer[_sync]() to prepare for shutdown mode
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Drop unregister syscore from hyperv_cleanup to avoid hang (Gaurav
Kohli)
- Clean up panic path for Hyper-V framebuffer (Guilherme G. Piccoli)
- Allow IRQ remapping to work without x2apic (Nuno Das Neves)
- Fix comments (Olaf Hering)
- Expand hv_vp_assist_page definition (Saurabh Sengar)
- Improvement to page reporting (Shradha Gupta)
- Make sure TSC clocksource works when Linux runs as the root partition
(Stanislav Kinsburskiy)
* tag 'hyperv-next-signed-20221208' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Remove unregister syscore call from Hyper-V cleanup
iommu/hyper-v: Allow hyperv irq remapping without x2apic
clocksource: hyper-v: Add TSC page support for root partition
clocksource: hyper-v: Use TSC PFN getter to map vvar page
clocksource: hyper-v: Introduce TSC PFN getter
clocksource: hyper-v: Introduce a pointer to TSC page
x86/hyperv: Expand definition of struct hv_vp_assist_page
PCI: hv: update comment in x86 specific hv_arch_irq_unmask
hv: fix comment typo in vmbus_channel/low_latency
drivers: hv, hyperv_fb: Untangle and refactor Hyper-V panic notifiers
video: hyperv_fb: Avoid taking busy spinlock on panic path
hv_balloon: Add support for configurable order free page reporting
mm/page_reporting: Add checks for page_reporting_order param
|
|
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/f430bb12e12eb225ab1206db0be64b755ddafbdc.1667336095.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
dmtimer_systimer_init_clock()
If clk_get_rate() fails which is called after clk_prepare_enable(),
clk_disable_unprepare() need be called in error path to disable the
clock in dmtimer_systimer_init_clock().
Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221029114427.946520-1-yangyingliang@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
Clear the timer control register on driver probe and omap_dm_timer_free().
Otherwise we assume the consumer driver takes care of properly
initializing timer interrupts on PWM driver module reload for example.
AFAIK this is not currently needed as a fix, I just happened to run into
this while cleaning up things.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221028103813.40783-1-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
We can make timer_get_irq() static as noted by Janusz. It is only used by
omap_rproc_get_timer_irq() via platform data.
Reported-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221028103604.40385-1-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
We can now get a warning for 'omap_timer_match' defined but not used.
Let's fix this by dropping of_match_ptr for omap_timer_match.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: ab0bbef3ae0f ("clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221028103526.40319-1-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
The TVAL register is 32 bit signed. Thus only the lower 31 bits are
available to specify when an interrupt is to occur at some time in the
near future. Attempting to specify a larger interval with TVAL results
in a negative time delta which means the timer fires immediately upon
being programmed, rather than firing at that expected future time.
The solution is for Linux to declare that TVAL is a 31 bit register rather
than give its true size of 32 bits. This prevents Linux from programming
TVAL with a too-large value. Note that, prior to 5.16, this little trick
was the standard way to handle TVAL in Linux, so there is nothing new
happening here on that front.
The softlockup detector hides the issue, because it keeps generating
short timer deadlines that are within the scope of the broken timer.
Disable it, and you start using NO_HZ with much longer timer deadlines,
which turns into an interrupt flood:
11: 1124855130 949168462 758009394 76417474 104782230 30210281
310890 1734323687 GICv2 29 Level arch_timer
And "much longer" isn't that long: it takes less than 43s to underflow
TVAL at 50MHz (the frequency of the counter on XGene-1).
Some comments on the v1 version of this patch by Marc Zyngier:
XGene implements CVAL (a 64bit comparator) in terms of TVAL (a countdown
register) instead of the other way around. TVAL being a 32bit register,
the width of the counter should equally be 32. However, TVAL is a
*signed* value, and keeps counting down in the negative range once the
timer fires.
It means that any TVAL value with bit 31 set will fire immediately,
as it cannot be distinguished from an already expired timer. Reducing
the timer range back to a paltry 31 bits papers over the issue.
Another problem cannot be fixed though, which is that the timer interrupt
*must* be handled within the negative countdown period, or the interrupt
will be lost (TVAL will rollover to a positive value, indicative of a
new timer deadline).
Cc: stable@vger.kernel.org # 5.16+
Fixes: 012f18850452 ("clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations")
Signed-off-by: Joe Korty <joe.korty@concurrent-rt.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
[maz: revamped the commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221024165422.GA51107@zipoli.concurrent-rt.com
Link: https://lore.kernel.org/r/20221121145343.896018-1-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
In the WPCM450 SoC, the clocks for each timer can be gated individually.
To prevent the timer 1 clock from being gated, enable it explicitly.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20221104161850.2889894-3-j.neuschaefer@gmx.net
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
This reverts commit 232ccac1bd9b5bfe73895f527c08623e7fa0752d.
On the subject of suspend, the RISC-V SBI spec states:
This does not cover whether any given events actually reach the hart or
not, just what the hart will do if it receives an event. On PolarFire
SoC, and potentially other SiFive based implementations, events from the
RISC-V timer do reach a hart during suspend. This is not the case for the
implementation on the Allwinner D1 - there timer events are not received
during suspend.
To fix this, the CLOCK_EVT_FEAT_C3STOP (mis)feature was enabled for the
timer driver - but this has broken both RCU stall detection and timers
generally on PolarFire SoC and potentially other SiFive based
implementations.
If an AXI read to the PCIe controller on PolarFire SoC times out, the
system will stall, however, with CLOCK_EVT_FEAT_C3STOP active, the system
just locks up without RCU stalling:
io scheduler mq-deadline registered
io scheduler kyber registered
microchip-pcie 2000000000.pcie: host bridge /soc/pcie@2000000000 ranges:
microchip-pcie 2000000000.pcie: MEM 0x2008000000..0x2087ffffff -> 0x0008000000
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: axi read request error
microchip-pcie 2000000000.pcie: axi read timeout
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
Freeing initrd memory: 7332K
Similarly issues were reported with clock_nanosleep() - with a test app
that sleeps each cpu for 6, 5, 4, 3 ms respectively, HZ=250 & the blamed
commit in place, the sleep times are rounded up to the next jiffy:
== CPU: 1 == == CPU: 2 == == CPU: 3 == == CPU: 4 ==
Mean: 7.974992 Mean: 7.976534 Mean: 7.962591 Mean: 3.952179
Std Dev: 0.154374 Std Dev: 0.156082 Std Dev: 0.171018 Std Dev: 0.076193
Hi: 9.472000 Hi: 10.495000 Hi: 8.864000 Hi: 4.736000
Lo: 6.087000 Lo: 6.380000 Lo: 4.872000 Lo: 3.403000
Samples: 521 Samples: 521 Samples: 521 Samples: 521
Fortunately, the D1 has a second timer, which is "currently used in
preference to the RISC-V/SBI timer driver" so a revert here does not
hurt operation of D1 in its current form.
Ultimately, a DeviceTree property (or node) will be added to encode the
behaviour of the timers, but until then revert the addition of
CLOCK_EVT_FEAT_C3STOP.
Fixes: 232ccac1bd9b ("clocksource/drivers/riscv: Events are stopped during CPU suspend")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/linux-riscv/YzYTNQRxLr7Q9JR0@spud/
Link: https://github.com/riscv-non-isa/riscv-sbi-doc/issues/98/
Link: https://lore.kernel.org/linux-riscv/bf6d3b1f-f703-4a25-833e-972a44a04114@sholland.org/
Link: https://lore.kernel.org/r/20221122121620.3522431-1-conor.dooley@microchip.com
|
|
platform_driver struct
Commit ca7b72b5a5f2 ("clocksource: Add driver for the Ingenic JZ47xx OST")
adds the struct platform_driver ingenic_ost_driver, with the definition of
pm functions under the non-existing config PM_SUSPEND, which means the
intended pm functions were never actually included in any build.
As the only callbacks are .suspend_noirq and .resume_noirq, we can assume
that it is intended to be CONFIG_PM_SLEEP.
Since commit 1a3c7bb08826 ("PM: core: Add new *_PM_OPS macros, deprecate
old ones"), the default pattern for platform_driver definitions
conditional for CONFIG_PM_SLEEP is to use pm_sleep_ptr().
As __maybe_unused annotations on the dev_pm_ops structure and its callbacks
are not needed anymore, remove these as well.
Suggested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221123083159.22821-1-lukas.bulwahn@gmail.com
|
|
Documentation for most CMTs say that it takes two input clocks before
changes propagate to the timer. This is especially relevant when the timer
is stopped to change further settings.
Implement the delays according to the spec. To avoid unnecessary delays in
atomic mode, also check if the to-be-written value actually differs.
CMCNT is a bit special because testing showed that it requires 3 cycles to
propagate, which affects all CMTs. Also, the WRFLAG needs to be checked
before writing. This fixes "cannot clear CMCNT" messages which occur often
on R-Car Gen4 SoCs, but only very rarely on older SoCs for some reason.
Fixes: 81b3b2711072 ("clocksource: sh_cmt: Add support for multiple channels per device")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130210609.7718-1-wsa+renesas@sang-engineering.com
|
|
Microsoft Hypervisor root partition has to map the TSC page specified
by the hypervisor, instead of providing the page to the hypervisor like
it's done in the guest partitions.
However, it's too early to map the page when the clock is initialized, so, the
actual mapping is happening later.
Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: x86@kernel.org
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Daniel Lezcano <daniel.lezcano@linaro.org>
CC: linux-hyperv@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Link: https://lore.kernel.org/r/166759443644.385891.15921594265843430260.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Instead of converting the virtual address to physical directly.
This is a precursor patch for the upcoming support for TSC page mapping into
Microsoft Hypervisor root partition, where TSC PFN will be defined by the
hypervisor and thus can't be obtained by linear translation of the physical
address.
Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>
CC: Andy Lutomirski <luto@kernel.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: x86@kernel.org
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: Daniel Lezcano <daniel.lezcano@linaro.org>
CC: linux-kernel@vger.kernel.org
CC: linux-hyperv@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Link: https://lore.kernel.org/r/166749833939.218190.14095015146003109462.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
