summaryrefslogtreecommitdiff
path: root/drivers/clocksource
AgeCommit message (Collapse)AuthorFilesLines
2021-07-01Merge tag 'clk-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round has a diffstat dominated by Qualcomm clk drivers. Honestly though that's just a bunch of data so the diffstat reflects that. Looking beyond that there's just a bunch of updates all around in various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors that have a lot of patches in here. Overall the driver changes look to be mostly enabling more clks and non-critical fixes that we could hold until the next merge window. I'm especially excited about the series from Arnd that graduates clkdev to be the only implementation of clk_get() and clk_put(). That's a good step in the right direction to migreate eveerything over to the common clk framework. Now we don't have to worry about clkdev specific details, they're just part of the clk API now. Core: - clkdev is now the only option, i.e. clk_get()/clk_put() is implemented in only one place in the kernel instead of in drivers/clk/clkdev.c and in architectures that want their own implementation New Drivers: - Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs - Qualcomm MDM9607 GCC - Qualcomm SC8180X display clks - Qualcomm SM6125 GCC - Qualcomm SM8250 CAMCC (camera) - Renesas RZ/G2L SoC - Hisilicon hi3559A SoC Updates: - Stop using clock-output-names in ST clk drivers (yay!) - Support secure mode of STM32MP1 SoCs - Improve clock support for Actions S500 SoC - duty cycle setting support on qcom clks - Add TI am33xx spread spectrum clock support - Use determine_rate() for the Amlogic pll ops instead of round_rate() - Restrict Amlogic gp0/1 and audio plls range on g12a/sm1 - Improve Amlogic axg-audio controller error on deferral - Add NNA clocks on Amlogic g12a - Reduce memory footprint of Rockchip PLL rate tables - A fix for the newly added Rockchip rk3568 clk driver - Exported clock for the newly added Rockchip video decoder - Remove audio ipg clock from i.MX8MP - Remove deprecated legacy clock binding for i.MX SCU clock driver - Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM - Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif, audio, parallel interface) - Add dedicated clock ops for i.MX paralel interface - Different fixes for clocks controlled by ATF on i.MX SoCs - Add A53/A72 frequency scaling support i.MX clk-scu driver - Add special case for DCSS clock on suspend for i.MX clk-scu driver - Add parent save/restore on suspend/resume to i.MX clk-scu driver - Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver - Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their bindings - Tegra clk driver no longer deasserts resets on clk_enable as it gets in the way of certain power-up sequences - Fix compile testing for Tegra clk driver - One patch to fix a divider on the Allwinner v3s Audio PLL - Add support for CPU core clock boost modes on Renesas R-Car Gen3 - Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U - Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and improve support for multiple parents - Switch Renesas RZ/N1 divider clocks to .determine_rate() - Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3 - Convert ar7 to common clk framework - Convert ralink to common clk framework" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (161 commits) clk: zynqmp: Handle divider specific read only flag clk: zynqmp: Use firmware specific mux clock flags clk: zynqmp: Use firmware specific divider clock flags clk: zynqmp: Use firmware specific common clock flags clk: lmk04832: Use of match table clk: lmk04832: Depend on SPI clk: stm32mp1: new compatible for secure RCC support dt-bindings: clock: stm32mp1 new compatible for secure rcc dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15 dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15 dt-bindings: clock: add IDs for SCMI clocks on stm32mp15 reset: stm32mp1: remove stm32mp1 reset clk: hisilicon: Add clock driver for hi3559A SoC dt-bindings: Document the hi3559a clock bindings clk: si5341: Add sysfs properties to allow checking/resetting device faults clk: si5341: Add silabs,iovdd-33 property clk: si5341: Add silabs,xaxb-ext-clk property clk: si5341: Allow different output VDD_SEL values clk: si5341: Update initialization magic clk: si5341: Check for input clock presence and PLL lock on startup ...
2021-06-16clocksource/drivers/timer-ti-dm: Drop unnecessary restoreTony Lindgren1-1/+2
The device is not losing context on CPU_CLUSTER_PM_ERROR. As we are only saving and restoring context with cpu_pm, there is no need to restore the context in case of an error. Note that the unnecessary restoring of context does not cause issues, it's just not needed. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210518075306.35532-1-tony@atomide.com
2021-06-16clocksource/arm_arch_timer: Improve Allwinner A64 timer workaroundSamuel Holland1-1/+1
Bad counter reads are experienced sometimes when bit 10 or greater rolls over. Originally, testing showed that at least 10 lower bits would be set to the same value during these bad reads. However, some users still reported time skips. Wider testing revealed that on some chips, occasionally only the lowest 9 bits would read as the anomalous value. During these reads (which still happen only when bit 10), bit 9 would read as the correct value. Reduce the mask by one bit to cover these cases as well. Cc: stable@vger.kernel.org Fixes: c950ca8c35ee ("clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability") Reported-by: Roman Stratiienko <r.stratiienko@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210515021439.55316-1-samuel@sholland.org
2021-06-16clocksource/drivers/arm_global_timer: Remove duplicated argument in ↵Wan Jiabing1-1/+1
arm_global_timer Fix the following coccicheck warning: drivers/clocksource/arm_global_timer.c:107:4-23: duplicated argument to & or | Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210615115440.8881-1-wanjiabing@vivo.com
2021-06-16clocksource/drivers/arm_global_timer: Make symbol 'gt_clk_rate_change_nb' staticZou Wei1-1/+1
The sparse tool complains as follows: drivers/clocksource/arm_global_timer.c:54:23: warning: symbol 'gt_clk_rate_change_nb' was not declared. Should it be static? This symbol is not used outside of arm_global_timer.c, so mark it static. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1623490046-37972-1-git-send-email-zou_wei@huawei.com
2021-06-16arm: zynq: don't disable CONFIG_ARM_GLOBAL_TIMER due to CONFIG_CPU_FREQ anymoreAndrea Merello1-0/+1
Now ARM global timer driver could work even if it's source clock rate changes, so we don't need to disable that driver when cpu frequency scaling is in use. This cause Zynq arch to get support for timer delay and get_cycles(). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-3-andrea.merello@gmail.com
2021-06-16clocksource/drivers/arm_global_timer: Implement rate compensation whenever ↵Andrea Merello2-10/+125
source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-06-15clocksource/drivers/ingenic: Rename unreasonable array names周琰杰 (Zhou Yanjie)1-5/+5
1.Rename the "ingenic_ost_clk_info[]" to "x1000_ost_clk_info[]" to facilitate the addition of OST support for X2000 SoC in a later commit 2.When the OST support for X2000 SoC is added, there will be two compatible strings, so renaming "ingenic_ost_of_match[]" to "ingenic_ost_of_matches[]" is more reasonable 3.Remove the unnecessary comma in "ingenic_ost_of_matches[]" to reduce code size as much as possible. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1622824306-30987-2-git-send-email-zhouyanjie@wanyeetech.com
2021-06-15clocksource/drivers/timer-ti-dm: Save and restore timer TIOCP_CFGTony Lindgren1-0/+6
As we are using cpu_pm to save and restore context, we must also save and restore the timer sysconfig register TIOCP_CFG. This is needed because we are not calling PM runtime functions at all with cpu_pm. Fixes: b34677b0999a ("clocksource/drivers/timer-ti-dm: Implement cpu_pm notifier for context save and restore") Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Adam Ford <aford173@gmail.com> Cc: Andreas Kemnade <andreas@kemnade.info> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210415085506.56828-1-tony@atomide.com
2021-06-15clocksource/drivers/mediatek: Ack and disable interrupts on suspendEvan Benn1-0/+24
Interrupts are disabled during suspend before this driver disables its timers. ARM trusted firmware will abort suspend if the timer irq is pending, so ack and disable the timer interrupt during suspend. Signed-off-by: Evan Benn <evanbenn@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210512122528.v4.1.I1d9917047de06715da16e1620759f703fcfdcbcb@changeid
2021-06-08clkdev: remove CONFIG_CLKDEV_LOOKUPArnd Bergmann1-3/+3
This option is now synonymous with CONFIG_HAVE_CLK, so use the latter globally. Any out-of-tree platform ports that still use a private clk_get()/clk_put() implementation should move to CONFIG_COMMON_CLK. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-04clocksource/drivers/samsung_pwm: Constify source IO memoryKrzysztof Kozlowski1-1/+1
The 'source_reg' IO memory is only read, so the pointer can point to const for safety. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210506202729.157260-4-krzysztof.kozlowski@canonical.com
2021-06-04clocksource/drivers/samsung_pwm: Cleanup on init errorKrzysztof Kozlowski1-3/+17
Failure of timer initialization is likely to be fatal for the system, so cleanup in such case is not strictly necessary. However the code might be refactored or reused, so better not to rely on such assumption that system won't continue init failure. Unmap the IO memory and put the clock on initialization failures from devicetree. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210506202729.157260-3-krzysztof.kozlowski@canonical.com
2021-06-04clocksource/drivers/samsung_pwm: Constify passed structureKrzysztof Kozlowski1-1/+1
The 'struct samsung_pwm_variant' argument passed to initialization functions is not modified, so it can be made const for safety. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210506202729.157260-2-krzysztof.kozlowski@canonical.com
2021-06-04clocksource/drivers/samsung_pwm: Minor whitespace cleanupKrzysztof Kozlowski1-8/+11
Cleanup the code to be slightly more readable and follow coding convention - only whitespace. This fixes checkpatch warnings: WARNING: Block comments should align the * on each line WARNING: please, no space before tabs WARNING: Missing a blank line after declarations CHECK: Alignment should match open parenthesis Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210506202729.157260-1-krzysztof.kozlowski@canonical.com
2021-06-03clocksource/drivers/arm_arch_timer: Remove arch_timer_rate1Jisheng Zhang1-1/+0
This variable is added by my mistake, it's not used at all. Fixes: e2bf384d4329 ("clocksource/drivers/arm_arch_timer: Add __ro_after_init and __init") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210511154856.6afbcb65@xhacker.debian
2021-05-14clocksource/drivers/hyper-v: Re-enable VDSO_CLOCKMODE_HVCLOCK on X86Vitaly Kuznetsov1-2/+2
Mohammed reports (https://bugzilla.kernel.org/show_bug.cgi?id=213029) the commit e4ab4658f1cf ("clocksource/drivers/hyper-v: Handle vDSO differences inline") broke vDSO on x86. The problem appears to be that VDSO_CLOCKMODE_HVCLOCK is an enum value in 'enum vdso_clock_mode' and '#ifdef VDSO_CLOCKMODE_HVCLOCK' branch evaluates to false (it is not a define). Use a dedicated HAVE_VDSO_CLOCKMODE_HVCLOCK define instead. Fixes: e4ab4658f1cf ("clocksource/drivers/hyper-v: Handle vDSO differences inline") Reported-by: Mohammed Gamal <mgamal@redhat.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20210513073246.1715070-1-vkuznets@redhat.com
2021-05-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+36
Pull kvm updates from Paolo Bonzini: "This is a large update by KVM standards, including AMD PSP (Platform Security Processor, aka "AMD Secure Technology") and ARM CoreSight (debug and trace) changes. ARM: - CoreSight: Add support for ETE and TRBE - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - AMD PSP driver changes - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - a handful of "Get rid of oprofile leftovers" patches - Some selftests improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits) KVM: selftests: Speed up set_memory_region_test selftests: kvm: Fix the check of return value KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt() KVM: SVM: Skip SEV cache flush if no ASIDs have been used KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids() KVM: SVM: Drop redundant svm_sev_enabled() helper KVM: SVM: Move SEV VMCB tracking allocation to sev.c KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup() KVM: SVM: Unconditionally invoke sev_hardware_teardown() KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported) KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features KVM: SVM: Move SEV module params/variables to sev.c KVM: SVM: Disable SEV/SEV-ES if NPT is disabled KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails KVM: SVM: Zero out the VMCB array used to track SEV ASID association x86/sev: Drop redundant and potentially misleading 'sev_enabled' KVM: x86: Move reverse CPUID helpers to separate header file KVM: x86: Rename GPR accessors to make mode-aware variants the defaults ...
2021-04-26Merge tag 'arm-apple-m1-5.13' of ↵Linus Torvalds1-3/+21
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Apple M1 platform support from Arnd Bergmann: "The Apple M1 is the processor used it all current generation Apple Macintosh computers. Support for this platform so far is rudimentary, but it boots and can use framebuffer and serial console over a special USB cable. Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe) is work in progress but was not ready in time. A very detailed description of what works is in the commit message of commit 1bb2fd3880d4 ("Merge tag 'm1-soc-bringup-v5' [..]") and on the AsahiLinux wiki" Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/ * tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: asm-generic/io.h: Unbork ioremap_np() declaration arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree dt-bindings: display: Add apple,simple-framebuffer arm64: Kconfig: Introduce CONFIG_ARCH_APPLE irqchip/apple-aic: Add support for the Apple Interrupt Controller dt-bindings: interrupt-controller: Add DT bindings for apple-aic arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h of/address: Add infrastructure to declare MMIO as non-posted asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np arm64: Implement ioremap_np() to map MMIO as nGnRnE docs: driver-api: device-io: Document ioremap() variants & access funcs docs: driver-api: device-io: Document I/O access functions asm-generic/io.h: Add a non-posted variant of ioremap() arm64: arch_timer: Implement support for interrupt-names dt-bindings: timer: arm,arch_timer: Add interrupt-names support arm64: cputype: Add CPU implementor & types for the Apple M1 cores dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles dt-bindings: arm: apple: Add bindings for Apple ARM platforms dt-bindings: vendor-prefixes: Add apple prefix
2021-04-26Merge tag 'hyperv-next-signed-20210426' of ↵Linus Torvalds1-78/+171
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Wei Liu: - VMBus enhancement - Free page reporting support for Hyper-V balloon driver - Some patches for running Linux as Arm64 Hyper-V guest - A few misc clean-up patches * tag 'hyperv-next-signed-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (30 commits) drivers: hv: Create a consistent pattern for checking Hyper-V hypercall status x86/hyperv: Move hv_do_rep_hypercall to asm-generic video: hyperv_fb: Add ratelimit on error message Drivers: hv: vmbus: Increase wait time for VMbus unload Drivers: hv: vmbus: Initialize unload_event statically Drivers: hv: vmbus: Check for pending channel interrupts before taking a CPU offline Drivers: hv: vmbus: Drivers: hv: vmbus: Introduce CHANNELMSG_MODIFYCHANNEL_RESPONSE Drivers: hv: vmbus: Introduce and negotiate VMBus protocol version 5.3 Drivers: hv: vmbus: Use after free in __vmbus_open() Drivers: hv: vmbus: remove unused function Drivers: hv: vmbus: Remove unused linux/version.h header x86/hyperv: remove unused linux/version.h header x86/Hyper-V: Support for free page reporting x86/hyperv: Fix unused variable 'hi' warning in hv_apic_read x86/hyperv: Fix unused variable 'msr_val' warning in hv_qlock_wait hv: hyperv.h: a few mundane typo fixes drivers: hv: Fix EXPORT_SYMBOL and tab spaces issue Drivers: hv: vmbus: Drop error message when 'No request id available' asm-generic/hyperv: Add missing function prototypes per -W1 warnings clocksource/drivers/hyper-v: Move handling of STIMER0 interrupts ...
2021-04-08clocksource/drivers/arm_arch_timer: Add __ro_after_init and __initJisheng Zhang1-11/+12
Some functions are not needed after booting, so mark them as __init to move them to the .init section. Some global variables are never modified after init, so can be __ro_after_init. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210330140444.4fb2a7cb@xhacker.debian
2021-04-08clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940Tony Lindgren1-0/+76
There is a timer wrap issue on dra7 for the ARM architected timer. In a typical clock configuration the timer fails to wrap after 388 days. To work around the issue, we need to use timer-ti-dm percpu timers instead. Let's configure dmtimer3 and 4 as percpu timers by default, and warn about the issue if the dtb is not configured properly. Let's do this as a single patch so it can be backported to v5.8 and later kernels easily. Note that this patch depends on earlier timer-ti-dm systimer posted mode fixes, and a preparatory clockevent patch "clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue". For more information, please see the errata for "AM572x Sitara Processors Silicon Revisions 1.1, 2.0": https://www.ti.com/lit/er/sprz429m/sprz429m.pdf The concept is based on earlier reference patches done by Tero Kristo and Keerthy. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210323074326.28302-3-tony@atomide.com
2021-04-08clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issueTony Lindgren1-23/+43
There is a timer wrap issue on dra7 for the ARM architected timer. In a typical clock configuration the timer fails to wrap after 388 days. To work around the issue, we need to use timer-ti-dm timers instead. Let's prepare for adding support for percpu timers by adding a common dmtimer_clkevt_init_common() and call it from dmtimer_clockevent_init(). This patch makes no intentional functional changes. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210323074326.28302-2-tony@atomide.com
2021-04-08clocksource/drivers/dw_apb_timer_of: Add handling for potential memory leakDinh Nguyen1-5/+21
Add calls to disable the clock and unmap the timer base address in case of any failures. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210322121844.2271041-1-dinguyen@kernel.org
2021-04-08clocksource/drivers/npcm: Add support for WPCM450Jonathan Neuschäfer1-0/+1
Add a compatible string for WPCM450, which has essentially the same timer controller. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210320181610.680870-11-j.neuschaefer@gmx.net
2021-04-08clocksource/drivers/sh_cmt: Don't use CMTOUT_IE with R-Car Gen2/3Wolfram Sang1-2/+3
CMTOUT_IE is only supported for older SoCs. Newer SoCs shall not set this bit. So, add a version check. Reported-by: Phong Hoang <phong.hoang.wz@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210309094448.31823-1-wsa+renesas@sang-engineering.com
2021-04-08clocksource/drivers/pistachio: Fix trivial typoDrew Fustini1-2/+2
Fix trivial typo, rename local variable from 'overflw' to 'overflow' in pistachio_clocksource_read_cycles(). Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Drew Fustini <drew@beagleboard.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210305090315.384547-1-drew@beagleboard.org
2021-04-08clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe()Wei Yongjun1-2/+2
In case of error, the function device_node_to_regmap() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: ca7b72b5a5f2 ("clocksource: Add driver for the Ingenic JZ47xx OST") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210308123031.2285083-1-weiyongjun1@huawei.com
2021-04-08clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stoppedTony Lindgren1-0/+1
To avoid spurious timer interrupts when KTIME_MAX is used, we need to configure set_state_oneshot_stopped(). Although implementing this is optional, it still affects things like power management for the extra timer interrupt. For more information, please see commit 8fff52fd5093 ("clockevents: Introduce CLOCK_EVT_STATE_ONESHOT_STOPPED state") and commit cf8c5009ee37 ("clockevents/drivers/arm_arch_timer: Implement ->set_state_oneshot_stopped()"). Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210304072135.52712-4-tony@atomide.com
2021-04-08clocksource/drivers/timer-ti-dm: Fix posted mode status check orderTony Lindgren1-6/+6
When the timer is configured in posted mode, we need to check the write- posted status register (TWPS) before writing to the register. We now check TWPS after the write starting with commit 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support"). For example, in the TRM for am571x the following is documented in chapter "22.2.4.13.1.1 Write Posting Synchronization Mode": "For each register, a status bit is provided in the timer write-posted status (TWPS) register. In this mode, it is mandatory that software check this status bit before any write access. If a write is attempted to a register with a previous access pending, the previous access is discarded without notice." The regression happened when I updated the code to use standard read/write accessors for the driver instead of using __omap_dm_timer_load_start(). We have__omap_dm_timer_load_start() check the TWPS status correctly using __omap_dm_timer_write(). Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210304072135.52712-2-tony@atomide.com
2021-04-08clocksource/drivers/ingenic-ost: Add support for the JZ4760BPaul Cercueil1-2/+3
The OST in the JZ4760B SoC works exactly the same as in the JZ4770. But since the JZ4760B is older, its Device Tree string does not fall back to the JZ4770 one; so add support for the JZ4760B compatible string here. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210308212302.10288-3-paul@crapouillou.net
2021-04-08clocksource/drivers/ingenic: Add support for the JZ4760Paul Cercueil1-0/+2
Add support for the TCU (Timer/Counter Unit) of the JZ4760 and JZ4760B SoCs. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210308212302.10288-2-paul@crapouillou.net
2021-04-08arm64: arch_timer: Implement support for interrupt-namesHector Martin1-3/+21
This allows the devicetree to correctly represent the available set of timers, which varies from device to device, without the need for fake dummy interrupts for unavailable slots. Also add the hyp-virt timer/PPI, which is not currently used, but worth representing. Reviewed-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Hector Martin <marcan@marcan.st>
2021-04-07ptp: arm/arm64: Enable ptp_kvm for arm/arm64Jianyong Wu1-0/+34
Currently, there is no mechanism to keep time sync between guest and host in arm/arm64 virtualization environment. Time in guest will drift compared with host after boot up as they may both use third party time sources to correct their time respectively. The time deviation will be in order of milliseconds. But in some scenarios,like in cloud environment, we ask for higher time precision. kvm ptp clock, which chooses the host clock source as a reference clock to sync time between guest and host, has been adopted by x86 which takes the time sync order from milliseconds to nanoseconds. This patch enables kvm ptp clock for arm/arm64 and improves clock sync precision significantly. Test result comparisons between with kvm ptp clock and without it in arm/arm64 are as follows. This test derived from the result of command 'chronyc sources'. we should take more care of the last sample column which shows the offset between the local clock and the source at the last measurement. no kvm ptp in guest: MS Name/IP address Stratum Poll Reach LastRx Last sample ======================================================================== ^* dns1.synet.edu.cn 2 6 377 13 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 21 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 29 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 37 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 45 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 53 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 61 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 4 -130us[ +796us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 12 -130us[ +796us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 20 -130us[ +796us] +/- 21ms in host: MS Name/IP address Stratum Poll Reach LastRx Last sample ======================================================================== ^* 120.25.115.20 2 7 377 72 -470us[ -603us] +/- 18ms ^* 120.25.115.20 2 7 377 92 -470us[ -603us] +/- 18ms ^* 120.25.115.20 2 7 377 112 -470us[ -603us] +/- 18ms ^* 120.25.115.20 2 7 377 2 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 22 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 43 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 63 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 83 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 103 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 123 +872ns[-6808ns] +/- 17ms The dns1.synet.edu.cn is the network reference clock for guest and 120.25.115.20 is the network reference clock for host. we can't get the clock error between guest and host directly, but a roughly estimated value will be in order of hundreds of us to ms. with kvm ptp in guest: chrony has been disabled in host to remove the disturb by network clock. MS Name/IP address Stratum Poll Reach LastRx Last sample ======================================================================== * PHC0 0 3 377 8 -7ns[ +1ns] +/- 3ns * PHC0 0 3 377 8 +1ns[ +16ns] +/- 3ns * PHC0 0 3 377 6 -4ns[ -0ns] +/- 6ns * PHC0 0 3 377 6 -8ns[ -12ns] +/- 5ns * PHC0 0 3 377 5 +2ns[ +4ns] +/- 4ns * PHC0 0 3 377 13 +2ns[ +4ns] +/- 4ns * PHC0 0 3 377 12 -4ns[ -6ns] +/- 4ns * PHC0 0 3 377 11 -8ns[ -11ns] +/- 6ns * PHC0 0 3 377 10 -14ns[ -20ns] +/- 4ns * PHC0 0 3 377 8 +4ns[ +5ns] +/- 4ns The PHC0 is the ptp clock which choose the host clock as its source clock. So we can see that the clock difference between host and guest is in order of ns. Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jianyong Wu <jianyong.wu@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201209060932.212364-8-jianyong.wu@arm.com
2021-04-07clocksource: Add clocksource id for arm arch counterJianyong Wu1-0/+2
Add clocksource id to the ARM generic counter so that it can be easily identified from callers such as ptp_kvm. Cc: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Jianyong Wu <jianyong.wu@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201209060932.212364-6-jianyong.wu@arm.com
2021-03-23timekeeping, clocksource: Fix various typos in commentsIngo Molnar9-14/+14
Fix ~56 single-word typos in timekeeping & clocksource code comments. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-kernel@vger.kernel.org
2021-03-08clocksource/drivers/hyper-v: Move handling of STIMER0 interruptsMichael Kelley1-53/+115
STIMER0 interrupts are most naturally modeled as per-cpu IRQs. But because x86/x64 doesn't have per-cpu IRQs, the core STIMER0 interrupt handling machinery is done in code under arch/x86 and Linux IRQs are not used. Adding support for ARM64 means adding equivalent code using per-cpu IRQs under arch/arm64. A better model is to treat per-cpu IRQs as the normal path (which it is for modern architectures), and the x86/x64 path as the exception. Do this by incorporating standard Linux per-cpu IRQ allocation into the main SITMER0 driver code, and bypass it in the x86/x64 exception case. For x86/x64, special case code is retained under arch/x86, but no STIMER0 interrupt handling code is needed under arch/arm64. No functional change. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1614721102-2241-11-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-03-08clocksource/drivers/hyper-v: Set clocksource rating based on Hyper-V featureMichael Kelley1-10/+13
On x86/x64, the TSC clocksource is available in a Hyper-V VM only if Hyper-V provides the TSC_INVARIANT flag. The rating on the Hyper-V Reference TSC page clocksource is currently set so that it will not override the TSC clocksource in this case. Alternatively, if the TSC clocksource is not available, then the Hyper-V clocksource is used. But on ARM64, the Hyper-V Reference TSC page clocksource should override the ARM arch counter, since the Hyper-V clocksource provides scaling and offsetting during live migrations that is not provided for the ARM arch counter. To get the needed behavior for both x86/x64 and ARM64, tweak the logic by defaulting the Hyper-V Reference TSC page clocksource rating to a large value that will always override. If the Hyper-V TSC_INVARIANT flag is set, then reduce the rating so that it will not override the TSC. While the logic for getting there is slightly different, the net result in the normal cases is no functional change. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1614721102-2241-10-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-03-08clocksource/drivers/hyper-v: Handle sched_clock differences inlineMichael Kelley1-0/+24
While the Hyper-V Reference TSC code is architecture neutral, the pv_ops.time.sched_clock() function is implemented for x86/x64, but not for ARM64. Current code calls a utility function under arch/x86 (and coming, under arch/arm64) to handle the difference. Change this approach to handle the difference inline based on whether GENERIC_SCHED_CLOCK is present. The new approach removes code under arch/* since the difference is tied more to the specifics of the Linux implementation than to the architecture. No functional change. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1614721102-2241-9-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-03-08clocksource/drivers/hyper-v: Handle vDSO differences inlineMichael Kelley1-2/+8
While the driver for the Hyper-V Reference TSC and STIMERs is architecture neutral, vDSO is implemented for x86/x64, but not for ARM64. Current code calls into utility functions under arch/x86 (and coming, under arch/arm64) to handle the difference. Change this approach to handle the difference inline based on whether VDSO_CLOCK_MODE_HVCLOCK is present. The new approach removes code under arch/* since the difference is tied more to the specifics of the Linux implementation than to the architecture. No functional change. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1614721102-2241-8-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-03-08Drivers: hv: Redo Hyper-V synthetic MSR get/set functionsMichael Kelley1-14/+12
Current code defines a separate get and set macro for each Hyper-V synthetic MSR used by the VMbus driver. Furthermore, the get macro can't be converted to a standard function because the second argument is modified in place, which is somewhat bad form. Redo this by providing a single get and a single set function that take a parameter specifying the MSR to be operated on. Fixup usage of the get function. Calling locations are no more complex than before, but the code under arch/x86 and the upcoming code under arch/arm64 is significantly simplified. Also standardize the names of Hyper-V synthetic MSRs that are architecture neutral. But keep the old x86-specific names as aliases that can be removed later when all references (particularly in KVM code) have been cleaned up in a separate patch series. No functional change. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/1614721102-2241-4-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-02-23Merge tag 'timers-urgent-2021-02-22' of ↵Linus Torvalds3-7/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A small set of clockevent fixes which fell through the cracks before the 5.11 release: - Ensure a clock is enabled on sh_cmt - Trivial compile fail and compile warning fixes" * tag 'timers-urgent-2021-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/mxs_timer: Add missing semicolon when DEBUG is defined clocksource/drivers/sh_cmt: Make sure channel clock supply is enabled clocksource/drivers/ixp4xx: Select TIMER_OF when needed
2021-02-22Merge tag 'hyperv-next-signed-20210216' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Wei Liu: - VMBus hardening patches from Andrea Parri and Andres Beltran. - Patches to make Linux boot as the root partition on Microsoft Hypervisor from Wei Liu. - One patch to add a new sysfs interface to support hibernation on Hyper-V from Dexuan Cui. - Two miscellaneous clean-up patches from Colin and Gustavo. * tag 'hyperv-next-signed-20210216' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (31 commits) Revert "Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer" iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition x86/hyperv: implement an MSI domain for root partition asm-generic/hyperv: import data structures for mapping device interrupts asm-generic/hyperv: introduce hv_device_id and auxiliary structures asm-generic/hyperv: update hv_interrupt_entry asm-generic/hyperv: update hv_msi_entry x86/hyperv: implement and use hv_smp_prepare_cpus x86/hyperv: provide a bunch of helper functions ACPI / NUMA: add a stub function for node_to_pxm() x86/hyperv: handling hypercall page setup for root x86/hyperv: extract partition ID from Microsoft Hypervisor if necessary x86/hyperv: allocate output arg pages if required clocksource/hyperv: use MSR-based access if running as root Drivers: hv: vmbus: skip VMBus initialization if Linux is root x86/hyperv: detect if Linux is the root partition asm-generic/hyperv: change HV_CPU_POWER_MANAGEMENT to HV_CPU_MANAGEMENT hv: hyperv.h: Replace one-element array with flexible-array in struct icmsg_negotiate hv_netvsc: Restrict configurations on isolated guests Drivers: hv: vmbus: Enforce 'VMBus version >= 5.2' on isolated guests ...
2021-02-11clocksource/hyperv: use MSR-based access if running as rootWei Liu1-0/+3
When Linux runs as the root partition, the setup required for TSC page is different. Luckily Linux also has access to the MSR based clocksource. We can just disable the TSC page clocksource if Linux is the root partition. Signed-off-by: Wei Liu <wei.liu@kernel.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20210203150435.27941-5-wei.liu@kernel.org
2021-02-10Merge tag 'timers-v5.12-rc1' of ↵Thomas Gleixner9-1374/+73
https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clocksource/events updates from Daniel Lezcano: - Drop dead code on efm32 (Uwe Kleine-König) - Move pr_fmt() before the includes on davinci driver (Bartosz Golaszewski) - Clarified timer interrupt must be specified on nuvoton DT bindings (Jonathan Neuschäfer) - Remove tango, sirf, u300 and atlas timer drivers (Arnd Bergman) - Add suspend/resume on pit64b (Claudiu Beznea) Link: https://lore.kernel.org/r/3747fbde-134f-5e1d-47d5-8776c1a52aa1@linaro.org
2021-02-03clocksource/drivers/timer-microchip-pit64b: Add clocksource suspend/resumeClaudiu Beznea1-15/+71
Add suspend/resume support for clocksource timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com
2021-02-03clocksource/drivers/prima: Remove sirf prima driverArnd Bergmann3-249/+0
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Cc: Barry Song <baohua@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <baohua@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210120131559.1971359-5-arnd@kernel.org
2021-02-03clocksource/drivers/atlas: Remove sirf atlas driverArnd Bergmann3-288/+0
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Cc: Barry Song <baohua@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <baohua@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210120131559.1971359-4-arnd@kernel.org
2021-02-03clocksource/drivers/tango: Remove tango driverArnd Bergmann3-66/+0
The tango platform is getting removed, so the driver is no longer needed. Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Mans Rullgard <mans@mansr.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210120131559.1971359-3-arnd@kernel.org
2021-02-03clocksource/drivers/u300: Remove the u300 driverArnd Bergmann3-465/+0
The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210120131559.1971359-2-arnd@kernel.org