summaryrefslogtreecommitdiff
path: root/drivers/cpufreq/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2014-07-09cpufreq: Makefile: fix compilation for davinci platformPrabhakar Lad1-1/+1
Since commtit 8a7b1227e303 (cpufreq: davinci: move cpufreq driver to drivers/cpufreq) this added dependancy only for CONFIG_ARCH_DAVINCI_DA850 where as davinci_cpufreq_init() call is used by all davinci platform. This patch fixes following build error: arch/arm/mach-davinci/built-in.o: In function `davinci_init_late': :(.init.text+0x928): undefined reference to `davinci_cpufreq_init' make: *** [vmlinux] Error 1 Fixes: 8a7b1227e303 (cpufreq: davinci: move cpufreq driver to drivers/cpufreq) Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-07PM / OPP: Move cpufreq specific OPP functions out of generic OPP libraryNishanth Menon1-0/+2
CPUFreq specific helper functions for OPP (Operating Performance Points) now use generic OPP functions that allow CPUFreq to be be moved back into CPUFreq framework. This allows for independent modifications or future enhancements as needed isolated to just CPUFreq framework alone. Here, we just move relevant code and documentation to make this part of CPUFreq infrastructure. Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-07cpufreq: powernv: cpufreq driver for powernv platformVaidyanathan Srinivasan1-0/+1
Backend driver to dynamically set voltage and frequency on IBM POWER non-virtualized platforms. Power management SPRs are used to set the required PState. This driver works in conjunction with cpufreq governors like 'ondemand' to provide a demand based frequency and voltage setting on IBM POWER non-virtualized platforms. PState table is obtained from OPAL v3 firmware through device tree. powernv_cpufreq back-end driver would parse the relevant device-tree nodes and initialise the cpufreq subsystem on powernv platform. The code was originally written by svaidy@linux.vnet.ibm.com. Over time it was modified to accomodate bug-fixes as well as updates to the the cpu-freq core. Relevant portions of the change logs corresponding to those modifications are noted below: * The policy->cpus needs to be populated in a hotplug-invariant manner instead of using cpu_sibling_mask() which varies with cpu-hotplug. This is because the cpufreq core code copies this content into policy->related_cpus mask which should not vary on cpu-hotplug. [Authored by srivatsa.bhat@linux.vnet.ibm.com] * Create a helper routine that can return the cpu-frequency for the corresponding pstate_id. Also, cache the values of the pstate_max, pstate_min and pstate_nominal and nr_pstates in a static structure so that they can be reused in the future to perform any validations. [Authored by ego@linux.vnet.ibm.com] * Create a driver attribute named cpuinfo_nominal_freq which creates a sysfs read-only file named cpuinfo_nominal_freq. Export the frequency corresponding to the nominal_pstate through this interface. Nominal frequency is the highest non-turbo frequency for the platform. This is generally used for setting governor policies from user space for optimal energy efficiency. [Authored by ego@linux.vnet.ibm.com] * Implement a powernv_cpufreq_get(unsigned int cpu) method which will return the current operating frequency. Export this via the sysfs interface cpuinfo_cur_freq by setting powernv_cpufreq_driver.get to powernv_cpufreq_get(). [Authored by ego@linux.vnet.ibm.com] [Change log updated by ego@linux.vnet.ibm.com] Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30cpufreq: arm_big_little: add vexpress SPC interface driverSudeep KarkadaNagesha1-0/+1
The TC2(i.e. CA15_A7) Versatile Express has external Cortex M3 based power controller which is responsible for CPU DVFS and SPC provides the interface for the same. This patch adds a tiny interface driver to check if OPPs are initialised by SPC platform code and register the arm_big_little cpufreq driver. Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-16cpufreq: remove CONFIG_CPU_FREQ_TABLEViresh Kumar1-4/+1
CONFIG_CPU_FREQ_TABLE will be always enabled when cpufreq framework is used, as cpufreq core depends on it. So, we don't need this CONFIG option anymore as it is not configurable. Remove CONFIG_CPU_FREQ_TABLE and update its users. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-26cpufreq: Remove unused APERF/MPERF supportStratos Karafotis1-1/+1
The target frequency calculation method in the ondemand governor has changed and it is now independent of the measured average frequency. Consequently, the APERF/MPERF support in cpufreq is not used any more, so drop it. [rjw: Changelog] Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-04Merge tag 'pm+acpi-3.11-rc1' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "This time the total number of ACPI commits is slightly greater than the number of cpufreq commits, but Viresh Kumar (who works on cpufreq) remains the most active patch submitter. To me, the most significant change is the addition of offline/online device operations to the driver core (with the Greg's blessing) and the related modifications of the ACPI core hotplug code. Next are the freezer updates from Colin Cross that should make the freezing of tasks a bit less heavy weight. We also have a couple of regression fixes, a number of fixes for issues that have not been identified as regressions, two new drivers and a bunch of cleanups all over. Highlights: - Hotplug changes to support graceful hot-removal failures. It sometimes is necessary to fail device hot-removal operations gracefully if they cannot be carried out completely. For example, if memory from a memory module being hot-removed has been allocated for the kernel's own use and cannot be moved elsewhere, it's desirable to fail the hot-removal operation in a graceful way rather than to crash the kernel, but currenty a success or a kernel crash are the only possible outcomes of an attempted memory hot-removal. Needless to say, that is not a very attractive alternative and it had to be addressed. However, in order to make it work for memory, I first had to make it work for CPUs and for this purpose I needed to modify the ACPI processor driver. It's been split into two parts, a resident one handling the low-level initialization/cleanup and a modular one playing the actual driver's role (but it binds to the CPU system device objects rather than to the ACPI device objects representing processors). That's been sort of like a live brain surgery on a patient who's riding a bike. So this is a little scary, but since we found and fixed a couple of regressions it caused to happen during the early linux-next testing (a month ago), nobody has complained. As a bonus we remove some duplicated ACPI hotplug code, because the ACPI-based CPU hotplug is now going to use the common ACPI hotplug code. - Lighter weight freezing of tasks. These changes from Colin Cross and Mandeep Singh Baines are targeted at making the freezing of tasks a bit less heavy weight operation. They reduce the number of tasks woken up every time during the freezing, by using the observation that the freezer simply doesn't need to wake up some of them and wait for them all to call refrigerator(). The time needed for the freezer to decide to report a failure is reduced too. Also reintroduced is the check causing a lockdep warining to trigger when try_to_freeze() is called with locks held (which is generally unsafe and shouldn't happen). - cpufreq updates First off, a commit from Srivatsa S Bhat fixes a resume regression introduced during the 3.10 cycle causing some cpufreq sysfs attributes to return wrong values to user space after resume. The fix is kind of fresh, but also it's pretty obvious once Srivatsa has identified the root cause. Second, we have a new freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to provide information previously available via related_cpus. From Lan Tianyu. Finally, we fix a number of issues, mostly related to the CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean up some code. The majority of changes from Viresh Kumar with bits from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and Tang Yuantian. - ACPICA update A usual bunch of updates from the ACPICA upstream. During the 3.4 cycle we introduced support for ACPI 5 extended sleep registers, but they are only supposed to be used if the HW-reduced mode bit is set in the FADT flags and the code attempted to use them without checking that bit. That caused suspend/resume regressions to happen on some systems. Fix from Lv Zheng causes those registers to be used only if the HW-reduced mode bit is set. Apart from this some other ACPICA bugs are fixed and code cleanups are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and Zhang Rui. - cpuidle updates New driver for Xilinx Zynq processors is added by Michal Simek. Multidriver support simplification, addition of some missing kerneldoc comments and Kconfig-related fixes come from Daniel Lezcano. - ACPI power management updates Changes to make suspend/resume work correctly in Xen guests from Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and cleanups and fixes of the ACPI device power state selection routine. - ACPI documentation updates Some previously missing pieces of ACPI documentation are added by Lv Zheng and Aaron Lu (hopefully, that will help people to uderstand how the ACPI subsystem works) and one outdated doc is updated by Hanjun Guo. - Assorted ACPI updates We finally nailed down the IA-64 issue that was the reason for reverting commit 9f29ab11ddbf ("ACPI / scan: do not match drivers against objects having scan handlers"), so we can fix it and move the ACPI scan handler check added to the ACPI video driver back to the core. A mechanism for adding CMOS RTC address space handlers is introduced by Lan Tianyu to allow some EC-related breakage to be fixed on some systems. A spec-compliant implementation of acpi_os_get_timer() is added by Mika Westerberg. The evaluation of _STA is added to do_acpi_find_child() to avoid situations in which a pointer to a disabled device object is returned instead of an enabled one with the same _ADR value. From Jeff Wu. Intel BayTrail PCH (Platform Controller Hub) support is added to the ACPI driver for Intel Low-Power Subsystems (LPSS) and that driver is modified to work around a couple of known BIOS issues. Changes from Mika Westerberg and Heikki Krogerus. The EC driver is fixed by Vasiliy Kulikov to use get_user() and put_user() instead of dereferencing user space pointers blindly. Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi Kani. - Assorted power management updates The "runtime idle" helper routine is changed to take the return values of the callbacks executed by it into account and to call rpm_suspend() if they return 0, which allows us to reduce the overall code bloat a bit (by dropping some code that's not necessary any more after that modification). The runtime PM documentation is updated by Alan Stern (to reflect the "runtime idle" behavior change). New trace points for PM QoS are added by Sahara (<keun-o.park@windriver.com>). PM QoS documentation is updated by Lan Tianyu. Code cleanups are made and minor issues are addressed by Bernie Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan. - devfreq updates New driver for the Exynos5-bus device from Abhilash Kesavan. Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun. - OMAP power management updates Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver updates from Andrii Tseglytskyi and Nishanth Menon." * tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits) cpufreq: Fix cpufreq regression after suspend/resume ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state() PM / Sleep: Warn about system time after resume with pm_trace cpufreq: don't leave stale policy pointer in cdbs->cur_policy acpi-cpufreq: Add new sysfs attribute freqdomain_cpus cpufreq: make sure frequency transitions are serialized ACPI: implement acpi_os_get_timer() according the spec ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan ACPI: Add CMOS RTC Operation Region handler support ACPI / processor: Drop unused variable from processor_perflib.c cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases ...
2013-06-27Merge branch 'pm-cpufreq-assorted' into pm-cpufreqRafael J. Wysocki1-0/+4
* pm-cpufreq-assorted: (21 commits) cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: e_powersaver: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: ACPI: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: make __cpufreq_notify_transition() static cpufreq: Fix minor formatting issues cpufreq: Fix governor start/stop race condition cpufreq: Simplify userspace governor cpufreq: powerpc: move cpufreq driver to drivers/cpufreq cpufreq: kirkwood: Select CPU_FREQ_TABLE option cpufreq: big.LITTLE needs cpufreq table cpufreq: SPEAr needs cpufreq table cpufreq: powerpc: Add cpufreq driver for Freescale e500mc SoCs cpufreq: remove unnecessary cpufreq_cpu_{get|put}() calls cpufreq: MAINTAINERS: Add git tree path for ARM specific updates cpufreq: rename index as driver_data in cpufreq_frequency_table cpufreq: Don't create empty /sys/devices/system/cpu/cpufreq directory cpufreq: Move get_cpu_idle_time() to cpufreq.c cpufreq: governors: Move get_governor_parent_kobj() to cpufreq.c cpufreq: Add EXPORT_SYMBOL_GPL for have_governor_per_policy ...
2013-06-18cpufreq: tegra: create CONFIG_ARM_TEGRA_CPUFREQViresh Kumar1-1/+1
currently Tegra cpufreq driver gets built based on ARCH_TEGRA, which doesn't depend on nor select CPU_FREQ itself, so: select CPU_FREQ_TABLE if CPU_FREQ ... isn't guaranteed to fire. The correct solution seems to be: * Add CONFIG_ARM_TEGRA_CPUFREQ to drivers/cpufreq/Kconfig.arm. * Make that Kconfig option selct CPU_FREQ_TABLE. * Make that Kconfig option be def_bool ARCH_TEGRA. * Modify drivers/cpufreq/Makefile to build tegra-cpufreq.c based on that. * Remove all the cpufreq-related stuff from arch/arm/mach-tegra/Kconfig. That way, tegra-cpufreq.c can't be built if !CPU_FREQ, and Tegra's cpufreq works the same way as all the other cpufreq drivers. This patch does it. Suggested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-06-18cpufreq: blackfin: enable driver for CONFIG_BFIN_CPU_FREQViresh Kumar1-1/+1
By mistake blackfin's cpufreq driver is enabled when CONFIG_BLACKFIN was present, whereas it should have been enabled only when CONFIG_BFIN_CPU_FREQ is present. Fix it. Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-06-07cpufreq: powerpc: move cpufreq driver to drivers/cpufreqViresh Kumar1-0/+3
Move cpufreq driver of powerpc platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-05cpufreq: powerpc: Add cpufreq driver for Freescale e500mc SoCsTang Yuantian1-0/+1
Add cpufreq driver for Freescale e500mc, e5500 and e6500 SoCs which are capable of changing the CPU frequency dynamically Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-20cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreqViresh Kumar1-0/+5
This patch moves cpufreq driver of Samsung's ARM based s3c24xx platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-10cpufreq: exynos: Add cpufreq driver for exynos5440Amit Daniel Kachhap1-0/+1
This patch adds dvfs support for exynos5440 SOC. This soc has 4 cores and they scale at same frequency. The nature of exynos5440 clock controller is different from previous exynos controllers so not using the common exynos cpufreq framework. The major difference being interrupt notification for frequency change. Also, OPP library is used for device tree parsing to get different parameters like frequency, voltage etc. Since the opp library sorts the frequency table in ascending order so they are again re-arranged in descending order. This will have one-to-one mapping with the clock controller state management logic. Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-10cpufreq: AMD "frequency sensitivity feedback" powersave bias for ondemand ↵Jacob Shin1-0/+1
governor Future AMD processors, starting with Family 16h, can provide software with feedback on how the workload may respond to frequency change -- memory-bound workloads will not benefit from higher frequency, where as compute-bound workloads will. This patch enables this "frequency sensitivity feedback" to aid the ondemand governor to make better frequency change decisions by hooking into the powersave bias. Signed-off-by: Jacob Shin <jacob.shin@amd.com> Acked-by: Thomas Renninger <trenn@suse.de> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-10cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreqViresh Kumar1-0/+3
This patch moves cpufreq driver of powerpc platforms/cell to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-10cpufreq: sparc: move cpufreq driver to drivers/cpufreqViresh Kumar1-0/+2
This patch moves cpufreq driver of SPARC architecture to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-10cpufreq: unicore2: move cpufreq driver to drivers/cpufreqViresh Kumar1-0/+1
This patch moves cpufreq driver of UNICORE-2 architecture to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-10cpufreq: sh: move cpufreq driver to drivers/cpufreqViresh Kumar1-0/+1
This patch moves cpufreq driver of SUPERH architecture to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-10cpufreq: mips: move cpufreq driver to drivers/cpufreqViresh Kumar1-0/+1
This patch moves cpufreq driver of MIPS architecture to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: John Crispin <blogic@openwrt.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-10cpufreq: ia64: move cpufreq driver to drivers/cpufreqViresh Kumar1-0/+1
This patch moves cpufreq driver of IA64 architecture to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-10cpufreq: cris: move cpufreq driver to drivers/cpufreqViresh Kumar1-0/+2
This patch moves cpufreq drivers of CRIS architecture to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-10cpufreq: blackfin: move cpufreq driver to drivers/cpufreqViresh Kumar1-0/+1
This patch moves cpufreq driver of BLACKFIN architecture to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-10cpufreq: AVR32: move cpufreq driver to drivers/cpufreqViresh Kumar1-0/+4
This patch moves cpufreq driver of AVR32 based at32ap platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-10cpufreq: sa11x0: move cpufreq driver to drivers/cpufreqViresh Kumar1-0/+2
This patch moves cpufreq driver of ARM based sa11x0 platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-08cpufreq: integrator: move cpufreq driver to drivers/cpufreqViresh Kumar1-0/+1
This patch moves cpufreq driver of ARM based integrator platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-08cpufreq: pxa2xx: move cpufreq driver to drivers/cpufreqViresh Kumar1-0/+2
This patch moves cpufreq driver of ARM based pxa2xx platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-08cpufreq: pxa3xx: move cpufreq driver to drivers/cpufreqViresh Kumar1-0/+1
This patch moves cpufreq driver of ARM based pxa3xx platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-08cpufreq: davinci: move cpufreq driver to drivers/cpufreqViresh Kumar1-0/+1
This patch moves cpufreq driver of ARM based davinci platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-08cpufreq: tegra: Move driver to drivers/cpufreqViresh Kumar1-0/+1
This patch moves cpufreq driver of ARM based tegra platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-08cpufreq: ARM: Arrange drivers in alphabetical orderViresh Kumar1-5/+5
Normally we keep drivers in alphabetical inside Kconfig and Makefile and over time this was broken for ARM cpufreq drivers. Fix it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-02cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glueViresh Kumar1-0/+5
big LITTLE is ARM's new Architecture focussing power/performance needs of modern world. More information about big LITTLE can be found here: http://www.arm.com/products/processors/technologies/biglittleprocessing.php http://lwn.net/Articles/481055/ In order to keep cpufreq support for all big LITTLE platforms simple/generic, this patch tries to add a generic cpufreq driver layer for all big LITTLE platforms. The driver is divided into two parts: - Core driver: Generic and shared across all big LITTLE SoC's - Glue drivers: Per platform drivers providing ops to the core driver This patch adds in a generic glue driver which would extract information from Device Tree. Future SoC's can either reuse the DT glue or write their own depending on the need. Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-22Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull ARM SoC driver specific changes from Arnd Bergmann: - Updates to the ux500 cpufreq code - Moving the u300 DMA controller driver to drivers/dma - Moving versatile express drivers out of arch/arm for sharing with arch/arm64 - Device tree bindings for the OMAP General Purpose Memory Controller * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: OMAP2+: gpmc: Add device tree documentation for elm handle ARM: OMAP2+: gpmc: add DT bindings for OneNAND ARM: OMAP2+: gpmc-onenand: drop __init annotation mtd: omap-onenand: pass device_node in platform data ARM: OMAP2+: Prevent potential crash if GPMC probe fails ARM: OMAP2+: gpmc: Remove unneeded of_node_put() arm: Move sp810.h to include/linux/amba/ ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs ARM: OMAP: gpmc-nand: drop __init annotation mtd: omap-nand: pass device_node in platform data ARM: OMAP: gpmc: don't create devices from initcall on DT dma: coh901318: cut down on platform data abstraction dma: coh901318: merge header files dma: coh901318: push definitions into driver dma: coh901318: push header down into the DMA subsystem dma: coh901318: skip hard-coded addresses dma: coh901318: remove hardcoded target addresses dma: coh901318: push platform data into driver dma: coh901318: create a proper platform data file ...
2013-02-09cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCsAndrew Lunn1-0/+1
The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-09cpufreq/x86: Add P-state driver for sandy bridge.Dirk Brandewie1-0/+1
Add a P-state driver for the Intel Sandy bridge processor. In cpufreq terminology this driver implements a scaling driver with an internal governor. When built into the the kernel this driver will be the preferred scaling driver for Sandy bridge processors. In addition to the interfaces provided by the cpufreq subsystem for controlling scaling drivers. The user may control the behavior of the driver via three sysfs files located in "/sys/devices/system/cpu/intel_pstate". max_perf_pct: limits the maximum P state that will be requested by the driver stated as a percentage of the avail performance. min_perf_pct: limits the minimum P state that will be requested by the driver stated as a percentage of the avail performance. no_turbo: limits the driver to selecting P states below the turbo frequency range. Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-09cpufreq: add imx6q-cpufreq driverShawn Guo1-0/+1
Add an imx6q-cpufreq driver for Freescale i.MX6Q SoC to handle the hardware specific frequency and voltage scaling requirements. The driver supports module build and is instantiated by the platform device/driver mechanism, so that it will not be instantiated on other platforms, as IMX is built with multiplatform support. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-02cpufreq / highbank: add support for highbank cpufreqMark Langsdorf1-1/+2
Highbank processors depend on the external ECME to perform voltage management based on a requested frequency. Communication between the A9 cores and the ECME happens over the pl320 IPC channel. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-02cpufreq: Make acpi-cpufreq link firstBorislav Petkov1-2/+3
Now that the majority of x86 CPUs out there are supported by acpi-cpufreq, we want it to load first and, in the AMD case, drop to powernow-k8 only on K8s. If, however, both powernow-k8 and acpi-cpufreq are built-in, the link order matters. Correct that. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-29Merge branch 'depends/cleanup' into next/driversOlof Johansson1-2/+3
* depends/cleanup: (375 commits) ARM: at91: fix board-rm9200-dt after sys_timer conversion clocksource: use clockevents_config_and_register() where possible ARM: use clockevents_config_and_register() where possible clockevents: export clockevents_config_and_register for module use timer: vt8500: Move timer code to drivers/clocksource irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h ARM: picoxcell: use common irqchip_init function ARM: spear: use common irqchip_init function irqchip: Move ARM VIC to drivers/irqchip ARM: samsung: remove unused tick.h ARM: remove unneeded vic.h includes ARM: remove mach .handle_irq for VIC users ARM: VIC: set handle_arch_irq in VIC initialization ARM: VIC: shrink down vic.h irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h ARM: use common irqchip_init for GIC init irqchip: Move ARM GIC to drivers/irqchip ARM: remove mach .handle_irq for GIC users ARM: GIC: set handle_arch_irq in GIC initialization ARM: GIC: remove direct use of gic_raise_softirq ...
2013-01-07cpufreq: Give driver used for dbx500 family a more generic nameLee Jones1-1/+1
This driver doesn't only handle cpufreq functionality for the db8500 anymore. There are new variants which rely on it too. Let's make the name a bit more generic. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-03cpufreq / governor: Fix problem with cpufreq_ondemand or cpufreq_conservativeLarry Finger1-2/+3
Since commit 2aacdff entitled "cpufreq: Move common part from governors to separate file", whenever the drivers that depend on this new file (cpufreq_ondemand or cpufreq_conservative) are built as modules, a new module named cpufreq_governor is created because the Makefile includes cpufreq_governor.o twice. As drivers/cpufreq/cpufreq_governor.c contains no MODULE directives, the resulting module has no license specified, which results in logging of a "module license 'unspecified' taints kernel". In addition, a number of globals are exported GPL only, and are therefore not available. This fix establishes a new boolean configuration variable that forces cpufreq_governor.o to be linked into the kernel whenever either cpufreq_ondemand or cpufreq_conservative is selected. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27cpufreq: SPEAr: Add CPUFreq driverDeepak Sikri1-0/+1
SPEAr is an ARM based family of SoCs. This patch adds in support of cpufreq driver for SPEAr SoCs. It is supported via DT only and so bindings are present in binding document. Signed-off-by: Deepak Sikri <deepak.sikri@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15cpufreq: Move common part from governors to separate file, v2viresh kumar1-2/+2
Multiple cpufreq governers have defined similar get_cpu_idle_time_***() routines. These routines must be moved to some common place, so that all governors can use them. So moving them to cpufreq_governor.c, which seems to be a better place for keeping these routines. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-09-10cpufreq: Add a generic cpufreq-cpu0 driverShawn Guo1-0/+2
It adds a generic cpufreq driver for CPU0 frequency management based on clk, regulator, OPP and device tree support. It can support both uniprocessor (UP) and those symmetric multiprocessor (SMP) systems which share clock and voltage across all CPUs. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-10cpufreq: Remove support for hardware P-state chips from powernow-k8Matthew Garrett1-1/+1
These chips are now supported by acpi-cpufreq, so we can delete all the code handling them. Andre: Tighten the deprecation warning message. Trigger load of acpi-cpufreq and let the load of the module finally fail. This avoids the problem of users ending up without any cpufreq support after the transition. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-03-24Merge branch 'next' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq Pull cpufreq updates for 3.4 from Dave Jones: new drivers and some fixes. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: provide disable_cpufreq() function to disable the API. EXYNOS5250: Add support cpufreq for EXYNOS5250 EXYNOS4X12: Add support cpufreq for EXYNOS4X12 [CPUFREQ] CPUfreq ondemand: update sampling rate without waiting for next sampling [CPUFREQ] Add S3C2416/S3C2450 cpufreq driver [CPUFREQ] Fix exposure of ARM_EXYNOS4210_CPUFREQ [CPUFREQ] EXYNOS4210: update the name of EXYNOS clock register [CPUFREQ] EXYNOS: Initialize locking_frequency with initial frequency [CPUFREQ] s3c64xx: Fix mis-cherry pick of VDDINT Fix up trivial conflicts in Kconfig and Makefile due to just changes next to each other (OMAP2PLUS changes vs some new EXYNOS cpufreq drivers).
2012-03-14EXYNOS5250: Add support cpufreq for EXYNOS5250Jaecheol Lee1-0/+1
This patch adds support cpufreq for EXYNOS5250 SoC. Basically, the exynos-cpufreq.c is used commonly and exynos5250-cpufreq.c is used for EXYNOS5250(two Cortex-A15 cores) SoC. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Dave Jones <davej@redhat.com>
2012-03-14EXYNOS4X12: Add support cpufreq for EXYNOS4X12Jaecheol Lee1-0/+1
This patch adds support cpufreq for EXYNOS4X12 SoCs. Basically, the exynos-cpufreq.c is used commonly and exynos4x12-cpufreq.c is used for EXYNOS4212(two Cortex-A9 cores) and EXYNOS4412(four Cortex-A9 cores) SoCs. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Dave Jones <davej@redhat.com>
2012-03-01[CPUFREQ] Add S3C2416/S3C2450 cpufreq driverHeiko Stübner1-0/+1
The S3C2416/S3C2450 SoCs support two sources for the armclk. The first source is the so called armdiv which divides the msysclk down to provide necessary cpu rates. In this mode the core voltage must be always at 1.3V. The frequency from the armdiv is not allowed to be lower than the hclk frequency. In the second mode the armclk can be sourced directly from the hclk in the so called "dynamic voltags scaling" (dvs) mode. Here the armdiv isn't used at all. Also in this mode the core voltage may be lowered. Existing hardware and tests with it suggest 1.0V as sufficient. When changing the clock source to the armdiv from the hclk, the SoC shows stability issues if the new frequency is higher than the current hclk frequency. Hence the driver always forces the armdiv to the hclk frequency before the source change and lets the cpufreq issue another set_target call for higher frequencies. To mark the hclk frequency as lower as the corresponding armdiv frequency it is set 1MHz below the real frequency. This lets the cpufreq framework change between 133MHz based on hclk and 133MHz based on armdiv at will. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Andrey Gusakov <dron0gus@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com>
2012-02-22cpufreq: OMAP driver depends CPUfreq tablesRussell King1-1/+1
The OMAP driver depends on CPUfreq table support for creating a table of frequencies from the OPP layer. Ensure that it's build to avoid link-time errors. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [khilman@ti.com: make user-selectable, but default y] Signed-off-by: Kevin Hilman <khilman@ti.com>