summaryrefslogtreecommitdiff
path: root/drivers/cpufreq/scmi-cpufreq.c
AgeCommit message (Collapse)AuthorFilesLines
2023-03-13cpufreq: Use of_property_present() for testing DT property presenceRob Herring1-1/+1
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-15cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1Lukasz Luba1-5/+10
The SCMI v3.1 adds support for power values in micro-Watts. They are not always in milli-Watts anymore (ignoring the bogo-Watts). Thus, the power must be converted conditionally before sending to Energy Model. Add the logic which handles the needed checks and conversions. Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-15PM: EM: convert power field to micro-Watts precision and align driversLukasz Luba1-0/+6
The milli-Watts precision causes rounding errors while calculating efficiency cost for each OPP. This is especially visible in the 'simple' Energy Model (EM), where the power for each OPP is provided from OPP framework. This can cause some OPPs to be marked inefficient, while using micro-Watts precision that might not happen. Update all EM users which access 'power' field and assume the value is in milli-Watts. Solve also an issue with potential overflow in calculation of energy estimation on 32bit machine. It's needed now since the power value (thus the 'cost' as well) are higher. Example calculation which shows the rounding error and impact: power = 'dyn-power-coeff' * volt_mV * volt_mV * freq_MHz power_a_uW = (100 * 600mW * 600mW * 500MHz) / 10^6 = 18000 power_a_mW = (100 * 600mW * 600mW * 500MHz) / 10^9 = 18 power_b_uW = (100 * 605mW * 605mW * 600MHz) / 10^6 = 21961 power_b_mW = (100 * 605mW * 605mW * 600MHz) / 10^9 = 21 max_freq = 2000MHz cost_a_mW = 18 * 2000MHz/500MHz = 72 cost_a_uW = 18000 * 2000MHz/500MHz = 72000 cost_b_mW = 21 * 2000MHz/600MHz = 70 // <- artificially better cost_b_uW = 21961 * 2000MHz/600MHz = 73203 The 'cost_b_mW' (which is based on old milli-Watts) is misleadingly better that the 'cost_b_uW' (this patch uses micro-Watts) and such would have impact on the 'inefficient OPPs' information in the Cpufreq framework. This patch set removes the rounding issue. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13PM: EM: Change the order of arguments in the .active_power() callbackLukasz Luba1-2/+2
The .active_power() callback passes the device pointer when it's called. Aligned with a convetion present in other subsystems and pass the 'dev' as a first argument. It looks more cleaner. Adjust all affected drivers which implement that API callback. Suggested-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-09cpufreq: replace cpumask_weight with cpumask_empty where appropriateYury Norov1-1/+1
drivers/cpufreq calls cpumask_weight() to check if any bit of a given cpumask is set. We can do it more efficiently with cpumask_empty() because cpumask_empty() stops traversing the cpumask as soon as it finds first set bit, while cpumask_weight() counts all bits unconditionally. Signed-off-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> (for SCMI cpufreq driver) Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-08-30cpufreq: scmi: Use .register_em() to register with energy modelViresh Kumar1-23/+42
Set the newly added .register_em() callback to register with the EM after the cpufreq policy is properly initialized. Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-08-04cpufreq: arm_scmi: Fix error path when allocation failedLukasz Luba1-1/+1
Stop the initialization when cpumask allocation failed and return an error. Fixes: 80a064dbd556 ("scmi-cpufreq: Get opp_shared_cpus from opp-v2 for EM") Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-05-20cpufreq: scmi: Fix an error messageChristophe JAILLET1-1/+1
'ret' is known to be 0 here. The last error code is stored in 'nr_opp', so use it in the error message. Fixes: 71a37cd6a59d ("scmi-cpufreq: Remove deferred probe") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-29cpufreq: scmi: Port driver to the new scmi_perf_proto_ops interfaceCristian Marussi1-18/+21
Port driver to the new SCMI perf interface based on protocol handles and common devm_get_ops(). Link: https://lore.kernel.org/r/20210316124903.35011-13-cristian.marussi@arm.com Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-03-15scmi-cpufreq: Get opp_shared_cpus from opp-v2 for EMNicola Mazzucato1-20/+54
By design, SCMI performance domains define the granularity of performance controls, they do not describe any underlying hardware dependencies (although they may match in many cases). It is therefore possible to have some platforms where hardware may have the ability to control CPU performance at different granularity and choose to describe fine-grained performance control through SCMI. In such situations, the energy model would be provided with inaccurate information based on controls, while it still needs to know the performance boundaries. To restore correct functionality, retrieve information of CPUs under the same performance domain from operating-points-v2 in DT, and pass it on to EM. Link: https://lore.kernel.org/r/20210218222326.15788-3-nicola.mazzucato@arm.com Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-03-15scmi-cpufreq: Remove deferred probeNicola Mazzucato1-2/+4
The current implementation of the scmi_cpufreq_init() function returns -EPROBE_DEFER when the OPP table is not populated. In practice the cpufreq core cannot handle this error code. Therefore, fix the return value and clarify the error message. Link: https://lore.kernel.org/r/20210218222326.15788-2-nicola.mazzucato@arm.com Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-02-04cpufreq: Remove CPUFREQ_STICKY flagViresh Kumar1-1/+1
During cpufreq driver's registration, if the ->init() callback for all the CPUs fail then there is not much point in keeping the driver around as it will only account for more of unnecessary noise, for example cpufreq core will try to suspend/resume the driver which never got registered properly. The removal of such a driver is avoided if the driver carries the CPUFREQ_STICKY flag. This was added way back [1] in 2004 and perhaps no one should ever need it now. A lot of drivers do set this flag, probably because they just copied it from other drivers. This was added earlier for some platforms [2] because their cpufreq drivers were getting registered before the CPUs were registered with subsys framework. And hence they used to fail. The same isn't true anymore though. The current code flow in the kernel is: start_kernel() -> kernel_init() -> kernel_init_freeable() -> do_basic_setup() -> driver_init() -> cpu_dev_init() -> subsys_system_register() //For CPUs -> do_initcalls() -> cpufreq_register_driver() Clearly, the CPUs will always get registered with subsys framework before any cpufreq driver can get probed. Remove the flag and update the relevant drivers. Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/include/linux/cpufreq.h?id=7cc9f0d9a1ab04cedc60d64fd8dcf7df224a3b4d # [1] Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/arch/arm/mach-sa1100/cpu-sa1100.c?id=f59d3bbe35f6268d729f51be82af8325d62f20f5 # [2] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-08Merge branch 'cpufreq/scmi' into cpufreq/arm/linux-nextViresh Kumar1-1/+4
2020-12-08cpufreq: arm_scmi: Discover the power scale in performance protocolLukasz Luba1-1/+3
Add mechanism to discover the power scale present in the performance protocol for all domains. Provide this information to Energy Model, which then can be checked in other frameworks, e.g. thermal. Suggested-by: Morten Rasmussen <morten.rasmussen@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-11-23cpufreq: scmi: Fix build for !CONFIG_COMMON_CLKSudeep Holla1-1/+3
Commit 8410e7f3b31e ("cpufreq: scmi: Fix OPP addition failure with a dummy clock provider") registers a dummy clock provider using devm_of_clk_add_hw_provider. These *_hw_provider functions are defined only when CONFIG_COMMON_CLK=y. One possible fix is to add the Kconfig dependency, but since we plan to move away from the clock dependency for scmi cpufreq, it is preferrable to avoid that. Let us just conditionally compile out the offending call to devm_of_clk_add_hw_provider. It also uses the variable 'dev' outside of the #ifdef block to avoid build warning. Fixes: 8410e7f3b31e ("cpufreq: scmi: Fix OPP addition failure with a dummy clock provider") Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-11-17cpufreq: scmi: Fix OPP addition failure with a dummy clock providerSudeep Holla1-0/+6
Commit dd461cd9183f ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER") handles -EPROBE_DEFER for the clock/interconnects within _allocate_opp_table() which is called from dev_pm_opp_add and it now propagates the error back to the caller. SCMI performance domain re-used clock bindings to keep it simple. However with the above mentioned change, if clock property is present in a device node, opps fails to get added with below errors until clk_get succeeds. cpu0: failed to add opp 450000000Hz cpu0: failed to add opps to the device ....(errors on cpu1-cpu4) cpu5: failed to add opp 450000000Hz cpu5: failed to add opps to the device So, in order to fix the issue, we need to register dummy clock provider. With the dummy clock provider, clk_get returns NULL(no errors!), then opp core proceeds to add OPPs for the CPUs. Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Fixes: dd461cd9183f ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-11-10PM: EM: Add a flag indicating units of power values in Energy ModelLukasz Luba1-1/+2
There are different platforms and devices which might use different scale for the power values. Kernel sub-systems might need to check if all Energy Model (EM) devices are using the same scale. Address that issue and store the information inside EM for each device. Thanks to that they can be easily compared and proper action triggered. Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Quentin Perret <qperret@google.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-24Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits) drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc soc: amlogic: pm-domains: use always-on flag reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() ...
2020-09-18cpufreq: move invariance setter calls in cpufreq coreIonela Voinescu1-10/+2
To properly scale its per-entity load-tracking signals, the task scheduler needs to be given a frequency scale factor, i.e. some image of the current frequency the CPU is running at. Currently, this scale can be computed either by using counters (APERF/MPERF on x86, AMU on arm64), or by piggy-backing on the frequency selection done by cpufreq. For the latter, drivers have to explicitly set the scale factor themselves, despite it being purely boiler-plate code: the required information depends entirely on the kind of frequency switch callback implemented by the driver, i.e. either of: target_index(), target(), fast_switch() and setpolicy(). The fitness of those callbacks with regard to driving the Frequency Invariance Engine (FIE) is studied below: target_index() ============== Documentation states that the chosen frequency "must be determined by freq_table[index].frequency". It isn't clear if it *has* to be that frequency, or if it can use that frequency value to do some computation that ultimately leads to a different frequency selection. All drivers go for the former, while the vexpress-spc-cpufreq has an atypical implementation which is handled separately. Therefore, the hook works on the assumption the core can use freq_table[index].frequency. target() ======= This has been flagged as deprecated since: commit 9c0ebcf78fde ("cpufreq: Implement light weight ->target_index() routine") It also doesn't have that many users: gx-suspmod.c:439: .target = cpufreq_gx_target, s3c24xx-cpufreq.c:428: .target = s3c_cpufreq_target, intel_pstate.c:2528: .target = intel_cpufreq_target, cppc_cpufreq.c:401: .target = cppc_cpufreq_set_target, cpufreq-nforce2.c:371: .target = nforce2_target, sh-cpufreq.c:163: .target = sh_cpufreq_target, pcc-cpufreq.c:573: .target = pcc_cpufreq_target, Similarly to the path taken for target_index() calls in the cpufreq core during a frequency change, all of the drivers above will mark the end of a frequency change by a call to cpufreq_freq_transition_end(). Therefore, cpufreq_freq_transition_end() can be used as the location for the arch_set_freq_scale() call to potentially inform the scheduler of the frequency change. This change maintains the previous functionality for the drivers that implement the target_index() callback, while also adding support for the few drivers that implement the deprecated target() callback. fast_switch() ============= This callback *has* to return the frequency that was selected. setpolicy() =========== This callback does not have any designated way of informing what was the end choice. But there are only two drivers using setpolicy(), and none of them have current FIE support: drivers/cpufreq/longrun.c:281: .setpolicy = longrun_set_policy, drivers/cpufreq/intel_pstate.c:2215: .setpolicy = intel_pstate_set_policy, The intel_pstate is known to use counter-driven frequency invariance. Conclusion ========== Given that the significant majority of current FIE enabled drivers use callbacks that lend themselves to triggering the setting of the FIE scale factor in a generic way, move the invariance setter calls to cpufreq core. As a result of setting the frequency scale factor in cpufreq core, after callbacks that lend themselves to trigger it, remove this functionality from the driver side. To be noted that despite marking a successful frequency change, many cpufreq drivers will consider the new frequency as the requested frequency, although this is might not be the one granted by the hardware. Therefore, the call to arch_set_freq_scale() is a "best effort" one, and it is up to the architecture if the new frequency is used in the new frequency scale factor setting (determined by the implementation of arch_set_freq_scale()) or eventually used by the scheduler (determined by the implementation of arch_scale_freq_capacity()). The architecture is in a better position to decide if it has better methods to obtain more accurate information regarding the current frequency and use that information instead (for example, the use of counters). Also, the implementation to arch_set_freq_scale() will now have to handle error conditions (current frequency == 0) in order to prevent the overhead in cpufreq core when the default arch_set_freq_scale() implementation is used. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Suggested-by: Valentin Schneider <valentin.schneider@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-07cpufreq: arm_scmi: Constify scmi_perf_ops pointersRikard Falkeborn1-3/+3
The perf_ops are not modified through this pointer. Make them const to indicate that. This is in preparation to make the scmi-ops pointers in scmi_handle const. Link: https://lore.kernel.org/r/20200906230452.33410-2-rikard.falkeborn@gmail.com Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-08-04Merge tag 'pm-5.9-rc1' of ↵Linus Torvalds1-8/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "The most significant change here is the extension of the Energy Model to cover non-CPU devices (as well as CPUs) from Lukasz Luba. There is also some new hardware support (Ice Lake server idle states table for intel_idle, Sapphire Rapids and Power Limit 4 support in the RAPL driver), some new functionality in the existing drivers (eg. a new switch to disable/enable CPU energy-efficiency optimizations in intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci, devfreq), including the elimination of W=1 build warnings from cpufreq done by Lee Jones. Specifics: - Make the Energy Model cover non-CPU devices (Lukasz Luba). - Add Ice Lake server idle states table to the intel_idle driver and eliminate a redundant static variable from it (Chen Yu, Rafael Wysocki). - Eliminate all W=1 build warnings from cpufreq (Lee Jones). - Add support for Sapphire Rapids and for Power Limit 4 to the Intel RAPL power capping driver (Sumeet Pawnikar, Zhang Rui). - Fix function name in kerneldoc comments in the idle_inject power capping driver (Yangtao Li). - Fix locking issues with cpufreq governors and drop a redundant "weak" function definition from cpufreq (Viresh Kumar). - Rearrange cpufreq to register non-modular governors at the core_initcall level and allow the default cpufreq governor to be specified in the kernel command line (Quentin Perret). - Extend, fix and clean up the intel_pstate driver (Srinivas Pandruvada, Rafael Wysocki): * Add a new sysfs attribute for disabling/enabling CPU energy-efficiency optimizations in the processor. * Make the driver avoid enabling HWP if EPP is not supported. * Allow the driver to handle numeric EPP values in the sysfs interface and fix the setting of EPP via sysfs in the active mode. * Eliminate a static checker warning and clean up a kerneldoc comment. - Clean up some variable declarations in the powernv cpufreq driver (Wei Yongjun). - Fix up the ->enter_s2idle callback definition to cover the case when it points to the same function as ->idle correctly (Neal Liu). - Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson). - Make the PM core emit "changed" uevent when adding/removing the "wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi). - Add a helper macro for declaring PM callbacks and use it in the MMC jz4740 driver (Paul Cercueil). - Fix white space in some places in the hibernate code and make the system-wide PM code use "const char *" where appropriate (Xiang Chen, Alexey Dobriyan). - Add one more "unsafe" helper macro to the freezer to cover the NFS use case (He Zhe). - Change the language in the generic PM domains framework to use parent/child terminology and clean up a typo and some comment fromatting in that code (Kees Cook, Geert Uytterhoeven). - Update the operating performance points OPP framework (Lukasz Luba, Andrew-sh.Cheng, Valdis Kletnieks): * Refactor dev_pm_opp_of_register_em() and update related drivers. * Add a missing function export. * Allow disabled OPPs in dev_pm_opp_get_freq(). - Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier): * Add support for delayed timers to the devfreq core and make the Samsung exynos5422-dmc driver use it. * Unify sysfs interface to use "df-" as a prefix in instance names consistently. * Fix devfreq_summary debugfs node indentation. * Add the rockchip,pmu phandle to the rk3399_dmc driver DT bindings. * List Dmitry Osipenko as the Tegra devfreq driver maintainer. * Fix typos in the core devfreq code. - Update the pm-graph utility to version 5.7 including a number of fixes related to suspend-to-idle (Todd Brandt). - Fix coccicheck errors and warnings in the cpupower utility (Shuah Khan). - Replace HTTP links with HTTPs ones in multiple places (Alexander A. Klimov)" * tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits) cpuidle: ACPI: fix 'return' with no value build warning cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode cpufreq: intel_pstate: Rearrange the storing of new EPP values intel_idle: Customize IceLake server support PM / devfreq: Fix the wrong end with semicolon PM / devfreq: Fix indentaion of devfreq_summary debugfs node PM / devfreq: Clean up the devfreq instance name in sysfs attr memory: samsung: exynos5422-dmc: Add module param to control IRQ mode memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold memory: samsung: exynos5422-dmc: Use delayed timer as default PM / devfreq: Add support delayed timer for polling mode dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle PM / devfreq: tegra: Add Dmitry as a maintainer PM / devfreq: event: Fix trivial spelling PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent cpuidle: change enter_s2idle() prototype cpuidle: psci: Prevent domain idlestates until consumers are ready cpuidle: psci: Convert PM domain to platform driver cpuidle: psci: Fix error path via converting to a platform driver cpuidle: psci: Fail cpuidle registration if set OSI mode failed ...
2020-06-30cpufreq: arm_scmi: Set fast_switch_possible conditionallyNicola Mazzucato1-1/+2
Currently the fast_switch_possible flag is set unconditionally to true. Based on this, schedutil does not create a thread for frequency switching and would always use the fast switch path. However, if the platform does not support SCMI fast channel, we use polling mode for SCMI message transfer. This may be possible only if there is dedicated channel for DVFS and all operations are in polling mode. Update this by retrieving the fast_switch capability based on the presence of fast channels in SCMI platform firmware. Link: https://lore.kernel.org/r/20200617094332.8391-2-nicola.mazzucato@arm.com Suggested-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-06-24PM / EM: update callback structure and add device pointerLukasz Luba1-8/+3
The Energy Model framework is going to support devices other that CPUs. In order to make this happen change the callback function and add pointer to a device as an argument. Update the related users to use new function and new callback from the Energy Model. Acked-by: Quentin Perret <qperret@google.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-24cpufreq: scmi: Match scmi device by both name and protocol idSudeep Holla1-1/+1
The scmi bus now has support to match the driver with devices not only based on their protocol id but also based on their device name if one is available. This was added to cater the need to support multiple devices and drivers for the same protocol. Let us add the name "cpufreq" to scmi_device_id table in the driver so that in matches only with device with the same name and protocol id SCMI_PROTOCOL_PERF. This will help to add "devfreq" device/driver. Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-03-04Merge branch 'pm-opp'Rafael J. Wysocki1-3/+36
* pm-opp: cpufreq: OMAP: Register an Energy Model cpufreq: imx6q: Register an Energy Model opp: no need to check return value of debugfs_create functions cpufreq: mediatek: Register an Energy Model cpufreq: scmi: Register an Energy Model cpufreq: arm_big_little: Register an Energy Model cpufreq: scpi: Register an Energy Model cpufreq: dt: Register an Energy Model
2019-02-24Merge back earlier cpufreq material for v5.1.Rafael J. Wysocki1-12/+2
2019-02-19cpufreq: scmi: Fix use-after-free in scmi_cpufreq_exit()Yangtao Li1-1/+1
This issue was detected with the help of Coccinelle. So change the order of function calls to fix it. Fixes: 1690d8bb91e37 (cpufreq: scpi/scmi: Fix freeing of dynamic OPPs) Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-12Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki1-3/+36
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm-opp Pull operating performance points (OPP) framework updates for v5.1 from Viresh Kumar: "This pull request contains following changes: - Introduced new OPP helper for power-estimation and used it in several cpufreq drivers (Quentin Perret, Matthias Kaehlcke, Dietmar Eggemann, and Yangtao Li). - OPP Debugfs cleanup (Greg KH). - OPP core cleanup (Viresh Kumar)." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: OMAP: Register an Energy Model cpufreq: imx6q: Register an Energy Model opp: no need to check return value of debugfs_create functions cpufreq: mediatek: Register an Energy Model cpufreq: scmi: Register an Energy Model cpufreq: arm_big_little: Register an Energy Model cpufreq: scpi: Register an Energy Model cpufreq: dt: Register an Energy Model PM / OPP: Introduce a power estimation helper PM / OPP: Remove unused parameter of _generic_set_opp_clk_only()
2019-02-07cpufreq: scmi: Register an Energy ModelQuentin Perret1-3/+36
The Energy Model (EM) framework provides an API to register the active power of CPUs. Call this API from the scmi-cpufreq driver by using the power costs obtained from firmware. This is done to ensure interested subsystems (the task scheduler, for example) can make use of the EM when available. Signed-off-by: Quentin Perret <quentin.perret@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-01-31cpufreq: scmi: Use auto-registration of thermal cooling deviceAmit Kucheria1-12/+2
Use the CPUFREQ_IS_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device. This allows removal of boiler plate code from the driver. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-09cpufreq: scmi: Fix frequency invariance in slow pathQuentin Perret1-2/+2
The scmi-cpufreq driver calls the arch_set_freq_scale() callback on frequency changes to provide scale-invariant load-tracking signals to the scheduler. However, in the slow path, it does so while specifying the current and max frequencies in different units, hence resulting in a broken freq_scale factor. Fix this by passing all frequencies in KHz, as stored in the CPUFreq frequency table. Fixes: 99d6bdf33877 (cpufreq: add support for CPU DVFS based on SCMI message protocol) Signed-off-by: Quentin Perret <quentin.perret@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: 4.17+ <stable@vger.kernel.org> # v4.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-04cpufreq: scpi/scmi: Fix freeing of dynamic OPPsViresh Kumar1-2/+2
Since the commit 2a4eb7358aba "OPP: Don't remove dynamic OPPs from _dev_pm_opp_remove_table()", dynamically created OPP aren't automatically removed anymore by dev_pm_opp_cpumask_remove_table(). This affects the scpi and scmi cpufreq drivers which no longer free OPPs on failures or on invocations of the policy->exit() callback. Create a generic OPP helper dev_pm_opp_remove_all_dynamic() which can be called from these drivers instead of dev_pm_opp_cpumask_remove_table(). In dev_pm_opp_remove_all_dynamic(), we need to make sure that the opp_list isn't getting accessed simultaneously from other parts of the OPP core while the helper is freeing dynamic OPPs, i.e. we can't drop the opp_table->lock while traversing through the OPP list. And to accomplish that, this patch also creates _opp_kref_release_unlocked() which can be called from this new helper with the opp_table lock already held. Cc: 4.20 <stable@vger.kernel.org> # v4.20 Reported-by: Valentin Schneider <valentin.schneider@arm.com> Fixes: 2a4eb7358aba "OPP: Don't remove dynamic OPPs from _dev_pm_opp_remove_table()" Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-10firmware: arm_scmi: rename get_transition_latency and add_opps_to_deviceSudeep Holla1-2/+2
Most of the scmi code follows the suggestion from Greg KH on a totally different thread[0] to have the subsystem name first, followed by the noun and finally the verb with couple of these exceptions. This patch fixes them so that all the functions names are aligned to that practice. [0] https://www.spinics.net/lists/arm-kernel/msg583673.html Acked-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2018-04-10cpufreq: SCMI: Don't validate the frequency table twiceViresh Kumar1-9/+1
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from SCMI driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-28cpufreq: scmi: add support for fast frequency switchingSudeep Holla1-0/+18
The cpufreq core provides option for drivers to implement fast_switch callback which is invoked for frequency switching from interrupt context. This patch adds support for fast_switch callback in SCMI cpufreq driver by making use of polling based SCMI transfer. It also sets the flag fast_switch_possible. Cc: linux-pm@vger.kernel.org Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2018-02-28cpufreq: add support for CPU DVFS based on SCMI message protocolSudeep Holla1-0/+246
On some ARM based systems, a separate Cortex-M based System Control Processor(SCP) provides the overall power, clock, reset and system control including CPU DVFS. SCMI Message Protocol is used to communicate with the SCP. This patch adds a cpufreq driver for such systems using SCMI interface to drive CPU DVFS. Cc: linux-pm@vger.kernel.org Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>