summaryrefslogtreecommitdiff
path: root/drivers/cpufreq
AgeCommit message (Collapse)AuthorFilesLines
2014-12-29Merge branches 'pm-cpufreq' and 'pm-cpuidle'Rafael J. Wysocki2-0/+17
* pm-cpufreq: cpufreq: fix a NULL pointer dereference in __cpufreq_governor() cpufreq-dt: defer probing if OPP table is not ready * pm-cpuidle: cpuidle / ACPI: remove unused CPUIDLE_FLAG_TIME_INVALID cpuidle: ladder: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID cpuidle: menu: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID
2014-12-20cpufreq: fix a NULL pointer dereference in __cpufreq_governor()Ethan Zhao1-0/+6
If ACPI _PPC changed notification happens before governor was initiated while kernel is booting, a NULL pointer dereference will be triggered: BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: [<ffffffff81470453>] __cpufreq_governor+0x23/0x1e0 PGD 0 Oops: 0000 [#1] SMP ... ... RIP: 0010:[<ffffffff81470453>] [<ffffffff81470453>] __cpufreq_governor+0x23/0x1e0 RSP: 0018:ffff881fcfbcfbb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff881fd11b3980 RCX: ffff88407fc20000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff881fd11b3980 RBP: ffff881fcfbcfbd8 R08: 0000000000000000 R09: 000000000000000f R10: ffffffff818068d0 R11: 0000000000000043 R12: 0000000000000004 R13: 0000000000000000 R14: ffffffff8196cae0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff881fffc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 00000000018ae000 CR4: 00000000000407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/0:3 (pid: 750, threadinfo ffff881fcfbce000, task ffff881fcf556400) Stack: ffff881fffc17d00 ffff881fcfbcfc18 ffff881fd11b3980 0000000000000000 ffff881fcfbcfc08 ffffffff81470d08 ffff881fd11b3980 0000000000000007 ffff881fcfbcfc18 ffff881fffc17d00 ffff881fcfbcfd28 ffffffff81472e9a Call Trace: [<ffffffff81470d08>] __cpufreq_set_policy+0x1b8/0x2e0 [<ffffffff81472e9a>] cpufreq_update_policy+0xca/0x150 [<ffffffff81472f20>] ? cpufreq_update_policy+0x150/0x150 [<ffffffff81324a96>] acpi_processor_ppc_has_changed+0x71/0x7b [<ffffffff81320bcd>] acpi_processor_notify+0x55/0x115 [<ffffffff812f9c29>] acpi_device_notify+0x19/0x1b [<ffffffff813084ca>] acpi_ev_notify_dispatch+0x41/0x5f [<ffffffff812f64a4>] acpi_os_execute_deferred+0x27/0x34 The root cause is a race conditon -- cpufreq core and acpi-cpufreq driver were initiated, but cpufreq_governor wasn't and _PPC changed notification happened, __cpufreq_governor() was called within acpi_os_execute_deferred kernel thread context. To fix this panic issue, add pointer checking code in __cpufreq_governor() before pointer policy->governor is to be dereferenced. Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-19Update/Remove soon-to-be-dead email addressDave Jones4-7/+5
I'm leaving Red Hat at the end of December 2014, so remove all references to my soon-to-be-dead address. (There are some references left in the tree, that need additional changes, I'll send those through the AGP maintainers). Signed-off-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-19Merge tag 'pm+acpi-3.19-rc1-2' of ↵Linus Torvalds1-2/+36
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are regression fixes (leds-gpio, ACPI backlight driver, operating performance points library, ACPI device enumeration messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device PM), some cleanups in the operating performance points (OPP) framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of minor intel_pstate driver changes, a new MAINTAINERS entry for it and an ACPI fan driver change needed for better support of thermal management in user space. Specifics: - Fix a regression in leds-gpio introduced by a recent commit that inadvertently changed the name of one of the properties used by the driver (Fabio Estevam). - Fix a regression in the ACPI backlight driver introduced by a recent fix that missed one special case that had to be taken into account (Aaron Lu). - Drop the level of some new kernel messages from the ACPI core introduced by a recent commit to KERN_DEBUG which they should have used from the start and drop some other unuseful KERN_ERR messages printed by ACPI (Rafael J Wysocki). - Revert an incorrect commit modifying the cpupower tool (Prarit Bhargava). - Fix two regressions introduced by recent commits in the OPP library and clean up some existing minor issues in that code (Viresh Kumar). - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the tree (or drop it where that can be done) in order to make it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf Hansson, Ludovic Desroches). There will be one more "CONFIG_PM_RUNTIME removal" batch after this one, because some new uses of it have been introduced during the current merge window, but that should be sufficient to finally get rid of it. - Make the ACPI EC driver more robust against race conditions related to GPE handler installation failures (Lv Zheng). - Prevent the ACPI device PM core code from attempting to disable GPEs that it has not enabled which confuses ACPICA and makes it report errors unnecessarily (Rafael J Wysocki). - Add a "force" command line switch to the intel_pstate driver to make it possible to override the blacklisting of some systems in that driver if needed (Ethan Zhao). - Improve intel_pstate code documentation and add a MAINTAINERS entry for it (Kristen Carlson Accardi). - Make the ACPI fan driver create cooling device interfaces witn names that reflect the IDs of the ACPI device objects they are associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B"). That's necessary for user space thermal management tools to be able to connect the fans with the parts of the system they are supposed to be cooling properly. From Srinivas Pandruvada" * tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) MAINTAINERS: add entry for intel_pstate ACPI / video: update the skip case for acpi_video_device_in_dod() power / PM: Eliminate CONFIG_PM_RUNTIME NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / EC: Fix unexpected ec_remove_handlers() invocations Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()" tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c PM: Remove the SET_PM_RUNTIME_PM_OPS() macro mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro PM / Kconfig: Replace PM_RUNTIME with PM in dependencies ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / PM: Do not disable wakeup GPEs that have not been enabled ACPI / utils: Drop error messages from acpi_evaluate_reference() ...
2014-12-18cpufreq-dt: defer probing if OPP table is not readyDmitry Torokhov1-0/+11
cpufreq-dt driver supports mode when OPP table is provided by platform code and not device tree. However on certain platforms code that fills OPP table may run after cpufreq driver tries to initialize, so let's report -EPROBE_DEFER if we do not find any entires in OPP table for the CPU. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-15Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds14-14/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-12Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree update from Jiri Kosina: "Usual stuff: documentation updates, printk() fixes, etc" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) intel_ips: fix a type in error message cpufreq: cpufreq-dt: Move newline to end of error message ps3rom: fix error return code treewide: fix typo in printk and Kconfig ARM: dts: bcm63138: change "interupts" to "interrupts" Replace mentions of "list_struct" to "list_head" kernel: trace: fix printk message scsi: mpt2sas: fix ioctl in comment zbud, zswap: change module author email clocksource: Fix 'clcoksource' typo in comment arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help gpio: msm-v1: make boolean argument more obvious usb: Fix typo in usb-serial-simple.c PCI: Fix comment typo 'COMFIG_PM_OPS' powerpc: Fix comment typo 'CONIFG_8xx' powerpc: Fix comment typos 'CONFiG_ALTIVEC' clk: st: Spelling s/stucture/structure/ isci: Spelling s/stucture/structure/ usb: gadget: zero: Spelling s/infrastucture/infrastructure/ treewide: Fix company name in module descriptions ...
2014-12-11intel_pstate: Add a few commentsKristen Carlson Accardi1-1/+31
Add a few comments in the code which calculates busyness to clarify parts of the algorithm. Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-11intel_pstate: add kernel parameter to force loadingEthan Zhao1-1/+5
To force loading on Oracle Sun X86 servers, provide one kernel command line parameter intel_pstate = force For those who are aware of the risk of no power capping capabily working and try to get better performance with this driver. Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com> Tested-by: Alexey Kodanev <alexey.kodanev@oracle.com> Reviewed-by: Linda Knippers <linda.knippers@hp.com> Acked-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-03intel_pstate: skip this driver if Sun server has _PPC methodethan zhao1-4/+41
Oracle Sun X86 servers have dynamic power capping capability that works via ACPI _PPC method etc, so skip loading this driver if Sun server has ACPI _PPC enabled. Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com> Tested-by: Linda Knippers <linda.knippers@hp.com> Acked-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-02cpufreq: arm_big_little: free OPP table created during ->init()Viresh Kumar3-2/+11
OPP layer now supports freeing of OPPs and we should free them once they aren't useful anymore. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-01imx6q: free OPP table created during ->init()Viresh Kumar1-1/+10
OPP layer now supports freeing of OPPs and we should free them once they aren't useful anymore. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-01exynos5440: free OPP table created during ->init()Viresh Kumar1-1/+4
OPP layer now supports freeing of OPPs and we should free them once they aren't useful anymore. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-01cpufreq-dt: free OPP table created during ->init()Viresh Kumar1-2/+4
OPP layer now supports freeing of OPPs and we should free them once they aren't useful anymore. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-30cpufreq-dt: register cooling device from ->ready() callbackViresh Kumar1-19/+32
Currently we are calling of_cpufreq_cooling_register() from ->init() callback. At this point of time cpufreq driver's policy isn't completely ready to be used as few of its fields/structure/pointers aren't yet initialized. Because of_cpufreq_cooling_register() tries to access policy with help of cpufreq_cpu_get() and then tries to get freq-table as well, these calls fail. To fix this, register the cooling device after the policy is ready to be used. And the right callback for it is the newly added ->ready() one. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Eduardo Valentin <edubezval@gmail.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-30cpufreq: Introduce ->ready() callback for cpufreq driversViresh Kumar1-0/+5
Currently there is no callback for cpufreq drivers which is called once the policy is ready to be used. There are some requirements where such a callback is required. One of them is registering a cooling device with the help of of_cpufreq_cooling_register(). This routine tries to get 'struct cpufreq_policy' for CPUs which isn't yet initialed at the time ->init() is called and so we face issues while registering the cooling device. Because we can't register cooling device from ->init(), we need a callback that is called after the policy is ready to be used and hence we introduce ->ready() callback. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Eduardo Valentin <edubezval@gmail.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-30cpufreq-dt: pass 'policy->related_cpus' to of_cpufreq_cooling_register()Viresh Kumar1-1/+1
The second parameter of of_cpufreq_cooling_register() should be the CPUs to which the frequency constraint will apply. As the cpufreq-dt driver now supports platforms with multiple 'struct cpufreq_policy' instances (i.e. > 1 clock domains for CPUs), passing 'cpu_present_mask' isn't correct anymore. As every policy will have a set of CPUs and that may not be equal to 'cpu_present_mask' always. So, pass only mask of CPUs which are controlled by current policy. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Eduardo Valentin <edubezval@gmail.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-27cpufreq: pxa2xx: Add Kconfig entryPetr Cvek2-2/+9
Add ability for PXA2xx CPUFreq to be compiled as a module or not at all. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-26cpufreq: Ref the policy object soonerTomeu Vizoso1-21/+21
Do it before it's assigned to cpufreq_cpu_data, otherwise when a driver tries to get the cpu frequency during initialization the policy kobj is referenced and we get this warning: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 64 at include/linux/kref.h:47 kobject_get+0x64/0x70() Modules linked in: CPU: 1 PID: 64 Comm: irq/77-tegra-ac Not tainted 3.18.0-rc4-next-20141114ccu-00050-g3eff942 #326 [<c0016fac>] (unwind_backtrace) from [<c001272c>] (show_stack+0x10/0x14) [<c001272c>] (show_stack) from [<c06085d8>] (dump_stack+0x98/0xd8) [<c06085d8>] (dump_stack) from [<c002892c>] (warn_slowpath_common+0x84/0xb4) [<c002892c>] (warn_slowpath_common) from [<c00289f8>] (warn_slowpath_null+0x1c/0x24) [<c00289f8>] (warn_slowpath_null) from [<c0220290>] (kobject_get+0x64/0x70) [<c0220290>] (kobject_get) from [<c03e944c>] (cpufreq_cpu_get+0x88/0xc8) [<c03e944c>] (cpufreq_cpu_get) from [<c03e9500>] (cpufreq_get+0xc/0x64) [<c03e9500>] (cpufreq_get) from [<c0285288>] (actmon_thread_isr+0x134/0x198) [<c0285288>] (actmon_thread_isr) from [<c0069008>] (irq_thread_fn+0x1c/0x40) [<c0069008>] (irq_thread_fn) from [<c0069324>] (irq_thread+0x134/0x174) [<c0069324>] (irq_thread) from [<c0040290>] (kthread+0xdc/0xf4) [<c0040290>] (kthread) from [<c000f4b8>] (ret_from_fork+0x14/0x3c) ---[ end trace b7bd64a81b340c59 ]--- Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-20cpufreq: cpufreq-dt: Move newline to end of error messageGeert Uytterhoeven1-1/+1
Currently the error message is needlessly splitted across two lines. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-18cpufreq: Kconfig: Remove architecture specific menu entriesViresh Kumar1-31/+19
CPUFreq driver's Kconfig entries are added in Kconfig.<arch> files and they are all included from the main Kconfig file using a menu entry. This creates another level of (unnecessary) hierarchy within the menuconfig entries. The problem occurs when there are drivers usable across architectures. Either their config entry is duplicated in all the supported architectures or is put into the main Kconfig entry. With the later one, we have menuconfig entries for drivers at two levels then. Fix these issues by getting rid of another level of menuconfig hierarchy and populate all drivers within the main cpufreq menu. To clearly distinguish where the drivers start from, also add a comment that will appear in menuconfig. Reported-by: Tang Yuantian <Yuantian.Tang@freescale.com> Suggested-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-18Merge back cpufreq material for 3.19-rc1.Rafael J. Wysocki7-7/+351
2014-11-14cpufreq: pcc: Enable autoload of pcc-cpufreq for ACPI processorsLenny Szubowicz1-0/+7
The pcc-cpufreq driver is not automatically loaded on systems where the platform's power management setting requires this driver. Instead, on those systems no CPU frequency driver is registered and active. Make the autoloading matching criteria for loading the pcc-cpufreq driver the same as done in acpi-cpufreq by commit c655affbd524d01 ("ACPI / cpufreq: Add ACPI processor device IDs to acpi-cpufreq"). x86 CPU frequency drivers are now typically autoloaded by specifying MODULE_DEVICE_TABLE entries and x86cpu model specific matching. But pcc-cpufreq was omitted when acpi-cpufreq and other drivers were changed to use this approach. Both acpi-cpufreq and pcc-cpufreq depend on a distinct and mutually exclusive set of ACPI methods which are not directly tied to specific processor model numbers. Both of these drivers have init routines which look for their required ACPI methods. As a result, only the appropriate driver registers as the cpu frequency driver and the other one ends up being unloaded. Tested on various systems where acpi-cpufreq, intel_pstate, and pcc-cpufreq are the expected cpu frequency drivers. Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com> Signed-off-by: Joseph Szczypek <joseph.szczypek@hp.com> Reported-by: Trinh Dao <trinh.dao@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-12intel_pstate: Add CPUID for BDW-H CPUDirk Brandewie1-0/+1
Add BDW-H to the list of supported processors. Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-12intel_pstate: Add support for HWPDirk Brandewie1-2/+98
Add support of Hardware Managed Performance States (HWP) described in Volume 3 section 14.4 of the SDM. With HWP enbaled intel_pstate will no longer be responsible for selecting P states for the processor. intel_pstate will continue to register to the cpufreq core as the scaling driver for CPUs implementing HWP. In HWP mode intel_pstate provides three functions reporting frequency to the cpufreq core, support for the set_policy() interface from the core and maintaining the intel_pstate sysfs interface in /sys/devices/system/cpu/intel_pstate. User preferences expressed via the set_policy() interface or the sysfs interface are forwared to the CPU via the HWP MSR interface. Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-12cpufreq: respect the min/max settings from user spaceVince Hsu1-2/+4
When the user space tries to set scaling_(max|min)_freq through sysfs, the cpufreq_set_policy() asks other driver's opinions for the max/min frequencies. Some device drivers, like Tegra CPU EDP which is not upstreamed yet though, may constrain the CPU maximum frequency dynamically because of board design. So if the user space access happens and some driver is capping the cpu frequency at the same time, the user_policy->(max|min) is overridden by the capped value, and that's not expected by the user space. And if the user space is not invoked again, the CPU will always be capped by the user_policy->(max|min) even no drivers limit the CPU frequency any more. This patch preserves the user specified min/max settings, so that every time the cpufreq policy is updated, the new max/min can be re-evaluated correctly based on the user's expection and the present device drivers' status. Signed-off-by: Vince Hsu <vinceh@nvidia.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-08cpufreq: Avoid crash in resume on SMP without OPPGeert Uytterhoeven1-1/+2
When resuming from s2ram on an SMP system without cpufreq operating points (e.g. there's no "operating-points" property for the CPU node in DT, or the platform doesn't use DT yet), the kernel crashes when bringing CPU 1 online: Enabling non-boot CPUs ... CPU1: Booted secondary processor Unable to handle kernel NULL pointer dereference at virtual address 0000003c pgd = ee5e6b00 [0000003c] *pgd=6e579003, *pmd=6e588003, *pte=00000000 Internal error: Oops: a07 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1246 Comm: s2ram Tainted: G W 3.18.0-rc3-koelsch-01614-g0377af242bb175c8-dirty #589 task: eeec5240 ti: ee704000 task.ti: ee704000 PC is at __cpufreq_add_dev.isra.24+0x24c/0x77c LR is at __cpufreq_add_dev.isra.24+0x244/0x77c pc : [<c0298efc>] lr : [<c0298ef4>] psr: 60000153 sp : ee705d48 ip : ee705d48 fp : ee705d84 r10: c04e0450 r9 : 00000000 r8 : 00000001 r7 : c05426a8 r6 : 00000001 r5 : 00000001 r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 20000153 r0 : c0542734 Verify that policy is not NULL before dereferencing it to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 8414809c6a1e (cpufreq: Preserve policy structure across suspend/resume) Cc: 3.12+ <stable@vger.kernel.org> # 3.12+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-06cpufreq: cpufreq-dt: Handle regulator_get_voltage() failureStefan Wahren1-2/+2
In error cases regulator_get_voltage() returns a negative value. So take care of it. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-06cpufreq: cpufreq-dt: Improve debug about matching OPPStefan Wahren1-0/+5
During test of new DT OPPs it's very helpful to print the matching OPP in case of frequency change. So it will be easier to find frequency rounding issues in the dts file. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-06cpufreq: Loongson1: Add cpufreq driver for Loongson1BKelvin Cheung3-0/+234
This patch adds cpufreq driver for Loongson1B which is capable of changing the CPU frequency dynamically. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-06cpufreq: allow powersave governor as the default without expert modeJames Geboski1-1/+0
The intel_pstate driver only supports the performance and the powersave governors. With the performance governor ensuring the highest possible performance settings, userspace tools fail to make any lasting changes. In order to allow userspace tools to make modifications to the settings, the powersave governor must be in use. This makes having the powersave governor as the default convenient for systems where the intel_pstate driver is being employed. Having to enable expert mode in the kernel configuration is just a headache for such a trivial task. This patch applies to all kernel versions 2.6.38 or greater after the migration from CONFIG_EMBEDDED to CONFIG_EXPERT (6a108a14fa35). Most importantly, this applies to kernel versions 3.9 or greater when the intel_pstate driver was introduced. Signed-off-by: James Geboski <jgeboski@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-05cpufreq: cpufreq-dt: Fix arguments in clock failure error messageAbhilash Kesavan1-2/+2
Fix the swapped arguments in the clock failure dev_err. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman14-14/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-10-28cpufreq: cpufreq-dt: Restore default cpumask_setall(policy->cpus)Geert Uytterhoeven1-1/+1
Commit 34e5a5273d6aa0ee ("cpufreq: cpufreq-dt: extend with platform_data") changed cpufreq_init() to only call cpumask_setall(policy->cpus) if the platform data indicates that all CPUs share the same clock. Before, cpufreq_generic_init() did this unconditionally. This causes a crash on r8a7791/koelsch when resuming from s2ram: Enabling non-boot CPUs ... CPU1: Booted secondary processor Unable to handle kernel NULL pointer dereference at virtual address 0000003c pgd = ee71f980 [0000003c] *pgd=6eeb6003, *pmd=6e0e9003, *pte=00000000 Internal error: Oops: a07 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1397 Comm: s2ram Tainted: G W 3.18.0-rc2-koelsch-00762-g7eed2a4e61d2d978 #581 task: ee6b76c0 ti: ee7f0000 task.ti: ee7f0000 PC is at __cpufreq_add_dev.isra.24+0x24c/0x77c LR is at __cpufreq_add_dev.isra.24+0x244/0x77c pc : [<c029e084>] lr : [<c029e07c>] psr: 60000153 sp : ee7f1d48 ip : ee7f1d48 fp : ee7f1d84 r10: c04e8448 r9 : 00000000 r8 : 00000001 r7 : c054a8c4 r6 : 00000001 r5 : 00000001 r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 20000153 r0 : c054a950 Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment user Control: 30c5307d Table: 6e71f980 DAC: fffffffd Process s2ram (pid: 1397, stack limit = 0xee7f0240) ... Backtrace: [<c029de38>] (__cpufreq_add_dev.isra.24) from [<c029e620>] (cpufreq_cpu_callback+0x6c/0x74) r10:eec75240 r9:c04e8448 r8:c04ef3a0 r7:00000001 r6:00000012 r5:00000000 r4:00000012 [<c029e5b4>] (cpufreq_cpu_callback) from [<c003f20c>] (notifier_call_chain+0x48/0x70) r4:ffffffdd r3:c029e5b4 [<c003f1c4>] (notifier_call_chain) from [<c003f2cc>] (__raw_notifier_call_chain+0x1c/0x24) r8:00000001 r7:00000010 r6:00000000 r5:00000000 r4:00000012 r3:ffffffff [<c003f2b0>] (__raw_notifier_call_chain) from [<c0026a00>] (__cpu_notify+0x34/0x50) [<c00269cc>] (__cpu_notify) from [<c0026a34>] (cpu_notify+0x18/0x1c) r4:00000001 [<c0026a1c>] (cpu_notify) from [<c0026c44>] (_cpu_up+0x108/0x144) [<c0026b3c>] (_cpu_up) from [<c0381c68>] (enable_nonboot_cpus+0x68/0xb8) r10:00000000 r9:c04e8ee6 r8:00000000 r7:00000003 r6:c04e8528 r5:c0506248 r4:00000001 [<c0381c00>] (enable_nonboot_cpus) from [<c0059038>] (suspend_devices_and_enter+0x29c/0x3e8) r6:c0506e70 r5:00000000 r4:00000000 r3:60000153 Restore the old default of calling cpumask_setall(policy->cpus) if no platform data is available to fix this. Fixes: 34e5a5273d6aa0ee (cpufreq: cpufreq-dt: extend with platform_data) Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-27cpufreq: cpufreq-dt: disable unsupported OPPsLucas Stach1-25/+41
If the regulator connected to the CPU voltage plane doesn't support an OPP specified voltage with the acceptable tolerance it's better to just disable the OPP instead of constantly failing the voltage scaling later on. Includes a fix to move initialization of opp_freq outside the loop to avoid an endless loop from Geert Uytterhoeven. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-24Merge tag 'pm+acpi-3.18-rc2' of ↵Linus Torvalds3-32/+137
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This is material that didn't make it to my 3.18-rc1 pull request for various reasons, mostly related to timing and travel (LinuxCon EU / LPC) plus a couple of fixes for recent bugs. The only really new thing here is the PM QoS class for memory bandwidth, but it is simple enough and users of it will be added in the next cycle. One major change in behavior is that platform devices enumerated by ACPI will use 32-bit DMA mask by default. Also included is an ACPICA update to a new upstream release, but that's mostly cleanups, changes in tools and similar. The rest is fixes and cleanups mostly. Specifics: - Fix for a recent PCI power management change that overlooked the fact that some IRQ chips might not be able to configure PCIe PME for system wakeup from Lucas Stach. - Fix for a bug introduced in 3.17 where acpi_device_wakeup() is called with a wrong ordering of arguments from Zhang Rui. - A bunch of intel_pstate driver fixes (all -stable candidates) from Dirk Brandewie, Gabriele Mazzotta and Pali Rohár. - Fixes for a rather long-standing problem with the OOM killer and the freezer that frozen processes killed by the OOM do not actually release any memory until they are thawed, so OOM-killing them is rather pointless, with a couple of cleanups on top (Michal Hocko, Cong Wang, Rafael J Wysocki). - ACPICA update to upstream release 20140926, inlcuding mostly cleanups reducing differences between the upstream ACPICA and the kernel code, tools changes (acpidump, acpiexec) and support for the _DDN object (Bob Moore, Lv Zheng). - New PM QoS class for memory bandwidth from Tomeu Vizoso. - Default 32-bit DMA mask for platform devices enumerated by ACPI (this change is mostly needed for some drivers development in progress targeted at 3.19) from Heikki Krogerus. - ACPI EC driver cleanups, mostly related to debugging, from Lv Zheng. - cpufreq-dt driver updates from Thomas Petazzoni. - powernv cpuidle driver update from Preeti U Murthy" * tag 'pm+acpi-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits) intel_pstate: Correct BYT VID values. intel_pstate: Fix BYT frequency reporting intel_pstate: Don't lose sysfs settings during cpu offline cpufreq: intel_pstate: Reflect current no_turbo state correctly cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy PCI / PM: handle failure to enable wakeup on PCIe PME ACPI: invoke acpi_device_wakeup() with correct parameters PM / freezer: Clean up code after recent fixes PM: convert do_each_thread to for_each_process_thread OOM, PM: OOM killed task shouldn't escape PM suspend freezer: remove obsolete comments in __thaw_task() freezer: Do not freeze tasks killed by OOM killer ACPI / platform: provide default DMA mask cpuidle: powernv: Populate cpuidle state details by querying the device-tree cpufreq: cpufreq-dt: adjust message related to regulators cpufreq: cpufreq-dt: extend with platform_data cpufreq: allow driver-specific data ACPI / EC: Cleanup coding style. ACPI / EC: Refine event/query debugging messages. ...
2014-10-24intel_pstate: Correct BYT VID values.Dirk Brandewie1-1/+12
Using a VID value that is not high enough for the requested P state can cause machine checks. Add a ceiling function to ensure calulated VIDs with fractional values are set to the next highest integer VID value. The algorythm for calculating the non-trubo VID from the BIOS writers guide is: vid_ratio = (vid_max - vid_min) / (max_pstate - min_pstate) vid = ceiling(vid_min + (req_pstate - min_pstate) * vid_ratio) Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-24intel_pstate: Fix BYT frequency reportingDirk Brandewie1-6/+36
BYT has a different conversion from P state to frequency than the core processors. This causes the min/max and current frequency to be misreported on some BYT SKUs. Tested on BYT N2820, Ivybridge and Haswell processors. Link: https://bugzilla.yoctoproject.org/show_bug.cgi?id=6663 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-24intel_pstate: Don't lose sysfs settings during cpu offlineDirk Brandewie1-3/+3
The user may have custom settings don't destroy them during suspend. Link: https://bugzilla.kernel.org/show_bug.cgi?id=80651 Reported-by: Tobias Jakobi <liquid.acid@gmx.net> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-24cpufreq: intel_pstate: Reflect current no_turbo state correctlyGabriele Mazzotta1-12/+36
Some BIOSes modify the state of MSR_IA32_MISC_ENABLE_TURBO_DISABLE based on the current power source for the system battery AC vs battery. Reflect the correct current state and ability to modify the no_turbo sysfs file based on current state of MSR_IA32_MISC_ENABLE_TURBO_DISABLE. Link: https://bugzilla.kernel.org/show_bug.cgi?id=83151 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-24cpufreq: expose scaling_cur_freq sysfs file for set_policy() driversDirk Brandewie1-6/+17
Currently the core does not expose scaling_cur_freq for set_policy() drivers this breaks some userspace monitoring tools. Change the core to expose this file for all drivers and if the set_policy() driver supports the get() callback use it to retrieve the current frequency. Link: https://bugzilla.kernel.org/show_bug.cgi?id=73741 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-24cpufreq: intel_pstate: Fix setting max_perf_pct in performance policyPali Rohár1-0/+1
Code which changes policy to powersave changes also max_policy_pct based on max_freq. Code which change max_perf_pct has upper limit base on value max_policy_pct. When policy is changing from powersave back to performance then max_policy_pct is not changed. Which means that changing max_perf_pct is not possible to high values if max_freq was too low in powersave policy. Test case: $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 800000 $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 3300000 $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor performance $ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct 100 $ echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor $ echo 800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq $ echo 20 > /sys/devices/system/cpu/intel_pstate/max_perf_pct $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor powersave $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 800000 $ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct 20 $ echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor $ echo 3300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq $ echo 100 > /sys/devices/system/cpu/intel_pstate/max_perf_pct $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor performance $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 3300000 $ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct 24 And now intel_pstate driver allows to set maximal value for max_perf_pct based on max_policy_pct which is 24 for previous powersave max_freq 800000. This patch will set default value for max_policy_pct when setting policy to performance so it will allow to set also max value for max_perf_pct. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Cc: All applicable <stable@vger.kernel.org> Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-21Merge branch 'mailbox-for-linus' of ↵Linus Torvalds1-1/+1
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox framework from Jassi Brar: "A framework for Mailbox controllers and clients have been cooking for more than a year now. Everybody in the CC list had been copied on patchset revisions and most of them have made sounds of approval, though just one concrete Reviewed-by. The patchset has also been in linux-next for a couple of weeks now and no conflict has been reported. The framework has the backing of at least 5 platforms, though I can't say if/when they upstream their drivers (some businesses have 'changed')" (Further acked-by by Arnd Bergmann and Suman Anna in the pull request thread) * 'mailbox-for-linus' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt: mailbox: add generic bindings doc: add documentation for mailbox framework mailbox: Introduce framework for mailbox mailbox: rename pl320-ipc specific mailbox.h
2014-10-21cpufreq: cpufreq-dt: adjust message related to regulatorsThomas Petazzoni1-2/+2
The cpufreq-dt driver tries to get a regulator for each CPU. This regulator is optional, but when not present, a scary message "failed to get cpuX regulator" is displayed. To solve this, we reduce the severity of the message from dev_warn() to dev_dbg() and we reword the message to not be as scary. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-21cpufreq: cpufreq-dt: extend with platform_dataThomas Petazzoni1-2/+15
This commit extends the cpufreq-dt driver to take a platform_data structure. This structure is for now used to tell the cpufreq-dt driver the layout of the clocks on the platform, i.e whether all CPUs share the same clock or whether each CPU has a separate clock. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-21cpufreq: allow driver-specific dataThomas Petazzoni1-0/+15
This commit extends the cpufreq_driver structure with an additional 'void *driver_data' field that can be filled by the ->probe() function of a cpufreq driver to pass additional custom information to the driver itself. A new function called cpufreq_get_driver_data() is added to allow a cpufreq driver to retrieve those driver data, since they are typically needed from a cpufreq_policy->init() callback, which does not have access to the cpufreq_driver structure. This function call is similar to the existing cpufreq_get_current_driver() function call. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-20cpufreq: drop owner assignment from platform_driversWolfram Sang14-14/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-15Merge tag 'clk-for-linus-3.18' of ↵Linus Torvalds1-9/+5
git://git.linaro.org/people/mike.turquette/linux Pull clock tree updates from Mike Turquette: "The clk tree changes for 3.18 are dominated by clock drivers. Mostly fixes and enhancements to existing drivers as well as new drivers. This tag contains a bit more arch code than I usually take due to some OMAP2+ changes. Additionally it contains the restart notifier handlers which are merged as a dependency into several trees. The PXA changes are the only messy part. Due to having a stable tree I had to revert one patch and follow up with one more fix near the tip of this tag. Some dead code is introduced but it will soon become live code after 3.18-rc1 is released as the rest of the PXA family is converted over to the common clock framework. Another trend in this tag is that multiple vendors have started to push the complexity of changing their CPU frequency into the clock driver, whereas this used to be done in CPUfreq drivers. Changes to the clk core include a generic gpio-clock type and a clk_set_phase() function added to the top-level clk.h api. Due to some confusion on the fbdev mailing list the kernel boot parameters documentation was updated to further explain the clk_ignore_unused parameter, which is often required by users of the simplefb driver. Finally some fixes to the locking around the clock debugfs stuff was done to prevent deadlocks when interacting with other subsystems." * tag 'clk-for-linus-3.18' of git://git.linaro.org/people/mike.turquette/linux: (99 commits) clk: pxa clocks build system fix Revert "arm: pxa: Transition pxa27x to clk framework" clk: samsung: register restart handlers for s3c2412 and s3c2443 clk: rockchip: add restart handler clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate doc/kernel-parameters.txt: clarify clk_ignore_unused arm: pxa: Transition pxa27x to clk framework dts: add devicetree bindings for pxa27x clocks clk: add pxa27x clock drivers arm: pxa: add clock pll selection bits clk: dts: document pxa clock binding clk: add pxa clocks infrastructure clk: gpio-gate: Ensure gpiod_ APIs are prototyped clk: ti: dra7-atl-clock: Mark the device as pm_runtime_irq_safe clk: ti: LLVMLinux: Move __init outside of type definition clk: ti: consider the fact that of_clk_get() might return an error clk: ti: dra7-atl-clock: fix a memory leak clk: ti: change clock init to use generic of_clk_init clk: hix5hd2: add I2C clocks clk: hix5hd2: add watchdog0 clocks ...
2014-10-12Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: "Here's a first pull request for powerpc updates for 3.18. The bulk of the additions are for the "cxl" driver, for IBM's Coherent Accelerator Processor Interface (CAPI). Most of it's in drivers/misc, which Greg & Arnd maintain, Greg said he was happy for us to take it through our tree. There's the usual minor cleanups and fixes, including a bit of noise in drivers from some of those. A bunch of updates to our EEH code, which has been getting more testing. Several nice speedups from Anton, including 20% in clear_page(). And a bunch of updates for freescale from Scott" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (130 commits) cxl: Fix afu_read() not doing finish_wait() on signal or non-blocking cxl: Add documentation for userspace APIs cxl: Add driver to Kbuild and Makefiles cxl: Add userspace header file cxl: Driver code for powernv PCIe based cards for userspace access cxl: Add base builtin support powerpc/mm: Add hooks for cxl powerpc/opal: Add PHB to cxl mode call powerpc/mm: Add new hash_page_mm() powerpc/powerpc: Add new PCIe functions for allocating cxl interrupts cxl: Add new header for call backs and structs powerpc/powernv: Split out set MSI IRQ chip code powerpc/mm: Export mmu_kernel_ssize and mmu_linear_psize powerpc/msi: Improve IRQ bitmap allocator powerpc/cell: Make spu_flush_all_slbs() generic powerpc/cell: Move data segment faulting code out of cell platform powerpc/cell: Move spu_handle_mm_fault() out of cell platform powerpc/pseries: Use new defines when calling H_SET_MODE powerpc: Update contact info in Documentation files powerpc/perf/hv-24x7: Simplify catalog_read() ...
2014-10-10Merge tag 'pm+acpi-3.18-rc1' of ↵Linus Torvalds13-266/+425
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "Features-wise, to me the most important this time is a rework of wakeup interrupts handling in the core that makes them work consistently across all of the available sleep states, including suspend-to-idle. Many thanks to Thomas Gleixner for his help with this work. Second is an update of the generic PM domains code that has been in need of some care for quite a while. Unused code is being removed, DT support is being added and domains are now going to be attached to devices in bus type code in analogy with the ACPI PM domain. The majority of work here was done by Ulf Hansson who also has been the most active developer this time. Apart from this we have a traditional ACPICA update, this time to upstream version 20140828 and a few ACPI wakeup interrupts handling patches on top of the general rework mentioned above. There also are several cpufreq commits including renaming the cpufreq-cpu0 driver to cpufreq-dt, as this is what implements generic DT-based cpufreq support, and a new DT-based idle states infrastructure for cpuidle. In addition to that, the ACPI LPSS driver is updated, ACPI support for Apple machines is improved, a few bugs are fixed and a few cleanups are made all over. Finally, the Adaptive Voltage Scaling (AVS) subsystem now has a tree maintained by Kevin Hilman that will be merged through the PM tree. Numbers-wise, the generic PM domains update takes the lead this time with 32 non-merge commits, second is cpufreq (15 commits) and the 3rd place goes to the wakeup interrupts handling rework (13 commits). Specifics: - Rework the handling of wakeup IRQs by the IRQ core such that all of them will be switched over to "wakeup" mode in suspend_device_irqs() and in that mode the first interrupt will abort system suspend in progress or wake up the system if already in suspend-to-idle (or equivalent) without executing any interrupt handlers. Among other things that eliminates the wakeup-related motivation to use the IRQF_NO_SUSPEND interrupt flag with interrupts which don't really need it and should not use it (Thomas Gleixner and Rafael Wysocki) - Switch over ACPI to handling wakeup interrupts with the help of the new mechanism introduced by the above IRQ core rework (Rafael Wysocki) - Rework the core generic PM domains code to eliminate code that's not used, add DT support and add a generic mechanism by which devices can be added to PM domains automatically during enumeration (Ulf Hansson, Geert Uytterhoeven and Tomasz Figa). - Add debugfs-based mechanics for debugging generic PM domains (Maciej Matraszek). - ACPICA update to upstream version 20140828. Included are updates related to the SRAT and GTDT tables and the _PSx methods are in the METHOD_NAME list now (Bob Moore and Hanjun Guo). - Add _OSI("Darwin") support to the ACPI core (unfortunately, that can't really be done in a straightforward way) to prevent Thunderbolt from being turned off on Apple systems after boot (or after resume from system suspend) and rework the ACPI Smart Battery Subsystem (SBS) driver to work correctly with Apple platforms (Matthew Garrett and Andreas Noever). - ACPI LPSS (Low-Power Subsystem) driver update cleaning up the code, adding support for 133MHz I2C source clock on Intel Baytrail to it and making it avoid using UART RTS override with Auto Flow Control (Heikki Krogerus). - ACPI backlight updates removing the video_set_use_native_backlight quirk which is not necessary any more, making the code check the list of output devices returned by the _DOD method to avoid creating acpi_video interfaces that won't work and adding a quirk for Lenovo Ideapad Z570 (Hans de Goede, Aaron Lu and Stepan Bujnak) - New Win8 ACPI OSI quirks for some Dell laptops (Edward Lin) - Assorted ACPI code cleanups (Fabian Frederick, Rasmus Villemoes, Sudip Mukherjee, Yijing Wang, and Zhang Rui) - cpufreq core updates and cleanups (Viresh Kumar, Preeti U Murthy, Rasmus Villemoes) - cpufreq driver updates: cpufreq-cpu0/cpufreq-dt (driver name change among other things), ppc-corenet, powernv (Viresh Kumar, Preeti U Murthy, Shilpasri G Bhat, Lucas Stach) - cpuidle support for DT-based idle states infrastructure, new ARM64 cpuidle driver, cpuidle core cleanups (Lorenzo Pieralisi, Rasmus Villemoes) - ARM big.LITTLE cpuidle driver updates: support for DT-based initialization and Exynos5800 compatible string (Lorenzo Pieralisi, Kevin Hilman) - Rework of the test_suspend kernel command line argument and a new trace event for console resume (Srinivas Pandruvada, Todd E Brandt) - Second attempt to optimize swsusp_free() (hibernation core) to make it avoid going through all PFNs which may be way too slow on some systems (Joerg Roedel) - devfreq updates (Paul Bolle, Punit Agrawal, Ãrjan Eide). - rockchip-io Adaptive Voltage Scaling (AVS) driver and AVS entry update in MAINTAINERS (Heiko Stübner, Kevin Hilman) - PM core fix related to clock management (Geert Uytterhoeven) - PM core's sysfs code cleanup (Johannes Berg)" * tag 'pm+acpi-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (105 commits) ACPI / fan: printk replacement PM / clk: Fix crash in clocks management code if !CONFIG_PM_RUNTIME PM / Domains: Rename cpu_data to cpuidle_data cpufreq: cpufreq-dt: fix potential double put of cpu OF node cpufreq: cpu0: rename driver and internals to 'cpufreq_dt' PM / hibernate: Iterate over set bits instead of PFNs in swsusp_free() cpufreq: ppc-corenet: remove duplicate update of cpu_data ACPI / sleep: Rework the handling of ACPI GPE wakeup from suspend-to-idle PM / sleep: Rename platform suspend/resume functions in suspend.c PM / sleep: Export dpm_suspend_late/noirq() and dpm_resume_early/noirq() ACPICA: Introduce acpi_enable_all_wakeup_gpes() ACPICA: Clear all non-wakeup GPEs in acpi_hw_enable_wakeup_gpe_block() ACPI / video: check _DOD list when creating backlight devices PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h cpufreq: Replace strnicmp with strncasecmp cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec cpufreq: powernv: Set the pstate of the last hotplugged out cpu in policy->cpus to minimum cpufreq: Allow stop CPU callback to be used by all cpufreq drivers PM / devfreq: exynos: Enable building exynos PPMU as module PM / devfreq: Export helper functions for drivers ...