summaryrefslogtreecommitdiff
path: root/drivers/cpufreq
AgeCommit message (Collapse)AuthorFilesLines
2018-08-23Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-467/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...
2018-08-22Merge tag 'pm-4.19-rc1-2' of ↵Linus Torvalds1-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These fix the main idle loop and the menu cpuidle governor, clean up the latter, fix a mistake in the PCI bus type's support for system suspend and resume, fix the ondemand and conservative cpufreq governors, address a build issue in the system wakeup framework and make the ACPI C-states desciptions less confusing. Specifics: - Make the idle loop handle stopped scheduler tick correctly (Rafael Wysocki). - Prevent the menu cpuidle governor from letting CPUs spend too much time in shallow idle states when it is invoked with scheduler tick stopped and clean it up somewhat (Rafael Wysocki). - Avoid invoking the platform firmware to make the platform enter the ACPI S3 sleep state with suspended PCIe root ports which may confuse the firmware and cause it to crash (Rafael Wysocki). - Fix sysfs-related race in the ondemand and conservative cpufreq governors which may cause the system to crash if the governor module is removed during an update of CPU frequency limits (Henry Willard). - Select SRCU when building the system wakeup framework to avoid a build issue in it (zhangyi). - Make the descriptions of ACPI C-states vendor-neutral to avoid confusion (Prarit Bhargava)" * tag 'pm-4.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: menu: Handle stopped tick more aggressively sched: idle: Avoid retaining the tick when it has been stopped PCI / ACPI / PM: Resume all bridges on suspend-to-RAM cpuidle: menu: Update stale polling override comment cpufreq: governor: Avoid accessing invalid governor_data x86/ACPI/cstate: Make APCI C1 FFH MWAIT C-state description vendor-neutral cpuidle: menu: Fix white space PM / sleep: wakeup: Fix build error caused by missing SRCU support
2018-08-17Merge tag 'powerpc-4.19-1' of ↵Linus Torvalds1-4/+16
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - A fix for a bug in our page table fragment allocator, where a page table page could be freed and reallocated for something else while still in use, leading to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for a powerpc only refcount. - Fixes to our pkey support. Several are user-visible changes, but bring us in to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer for reporting many of these. - A series to improve the hvc driver & related OPAL console code, which have been seen to cause hardlockups at times. The hvc driver changes in particular have been in linux-next for ~month. - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y. - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use anywhere other than as a paper weight. - An optimised memcmp implementation using Power7-or-later VMX instructions - Support for barrier_nospec on some NXP CPUs. - Support for flushing the count cache on context switch on some IBM CPUs (controlled by firmware), as a Spectre v2 mitigation. - A series to enhance the information we print on unhandled signals to bring it into line with other arches, including showing the offending VMA and dumping the instructions around the fault. Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand, Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao, zhong jiang" * tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits) powerpc/mm/book3s/radix: Add mapping statistics powerpc/uaccess: Enable get_user(u64, *p) on 32-bit powerpc/mm/hash: Remove unnecessary do { } while(0) loop powerpc/64s: move machine check SLB flushing to mm/slb.c powerpc/powernv/idle: Fix build error powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range powerpc/mm: remove warning about ‘type’ being set powerpc/32: Include setup.h header file to fix warnings powerpc: Move `path` variable inside DEBUG_PROM powerpc/powermac: Make some functions static powerpc/powermac: Remove variable x that's never read cxl: remove a dead branch powerpc/powermac: Add missing include of header pmac.h powerpc/kexec: Use common error handling code in setup_new_fdt() powerpc/xmon: Add address lookup for percpu symbols powerpc/mm: remove huge_pte_offset_and_shift() prototype powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled powerpc/pseries: Fix endianness while restoring of r3 in MCE handler. powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements powerpc/fadump: handle crash memory ranges array index overflow ...
2018-08-17cpufreq: governor: Avoid accessing invalid governor_dataHenry Willard1-2/+10
If cppc_cpufreq.ko is deleted at the same time that tuned-adm is changing profiles, there is a small chance that a race can occur between cpufreq_dbs_governor_exit() and cpufreq_dbs_governor_limits() resulting in a system failure when the latter tries to use policy->governor_data that has been freed by the former. This patch uses gov_dbs_data_mutex to synchronize access. Fixes: e788892ba3cc (cpufreq: governor: Get rid of governor events) Signed-off-by: Henry Willard <henry.willard@oracle.com> [ rjw: Subject, minor white space adjustment ] Cc: 4.8+ <stable@vger.kernel.org> # 4.8+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-06cpufreq: intel_pstate: Ignore turbo active ratio in HWPSrinivas Pandruvada1-1/+2
When HWP is active turbo active ratio is not used, so we should allow policy max frequency above turbo activation ratio to be set. When HWP is not active, then any policy max frequency above turbo activation ratio can result upto max one-core turbo frequency. This fix helps better thermal control in turbo region when other methods like "Running Average Power Limit" is not available to use. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-06Merge back cpufreq changes for 4.19.Rafael J. Wysocki7-15/+267
2018-07-31cpufreq: intel_pstate: Limit the scope of HWP dynamic boost platformsSrinivas Pandruvada1-2/+15
Dynamic boosting of HWP performance on IO wake showed significant improvement to IO workloads. This series was intended for Skylake Xeon platforms only and feature was enabled by default based on CPU model number. But some Xeon platforms reused the Skylake desktop CPU model number. This caused some undesirable side effects to some graphics workloads. Since they are heavily IO bound, the increase in CPU performance decreased the power available for GPU to do its computing and hence decrease in graphics benchmark performance. For example on a Skylake desktop, GpuTest benchmark showed average FPS reduction from 529 to 506. This change makes sure that HWP boost feature is only enabled for Skylake server platforms by using ACPI FADT preferred PM Profile. If some desktop users wants to get benefit of boost, they can still enable boost from intel_pstate sysfs attribute "hwp_dynamic_boost". Fixes: 41ab43c9c89e (cpufreq: intel_pstate: enable boost for Skylake Xeon) Link: https://bugs.freedesktop.org/show_bug.cgi?id=107410 Reported-by: Eero Tamminen <eero.t.tamminen@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Francisco Jerez <currojerez@riseup.net> Acked-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-30Merge back cpufreq material for 4.19.Rafael J. Wysocki7-15/+267
2018-07-26cpufreq: Fix a circular lock dependency problemWaiman Long1-1/+6
With lockdep turned on, the following circular lock dependency problem was reported: [ 57.470040] ====================================================== [ 57.502900] WARNING: possible circular locking dependency detected [ 57.535208] 4.18.0-0.rc3.1.el8+7.x86_64+debug #1 Tainted: G [ 57.577761] ------------------------------------------------------ [ 57.609714] tuned/1505 is trying to acquire lock: [ 57.633808] 00000000559deec5 (cpu_hotplug_lock.rw_sem){++++}, at: store+0x27/0x120 [ 57.672880] [ 57.672880] but task is already holding lock: [ 57.702184] 000000002136ca64 (kn->count#118){++++}, at: kernfs_fop_write+0x1d0/0x410 [ 57.742176] [ 57.742176] which lock already depends on the new lock. [ 57.742176] [ 57.785220] [ 57.785220] the existing dependency chain (in reverse order) is: : [ 58.932512] other info that might help us debug this: [ 58.932512] [ 58.973344] Chain exists of: [ 58.973344] cpu_hotplug_lock.rw_sem --> subsys mutex#5 --> kn->count#118 [ 58.973344] [ 59.030795] Possible unsafe locking scenario: [ 59.030795] [ 59.061248] CPU0 CPU1 [ 59.085377] ---- ---- [ 59.108160] lock(kn->count#118); [ 59.124935] lock(subsys mutex#5); [ 59.156330] lock(kn->count#118); [ 59.186088] lock(cpu_hotplug_lock.rw_sem); [ 59.208541] [ 59.208541] *** DEADLOCK *** In the cpufreq_register_driver() function, the lock sequence is: cpus_read_lock --> kn->count For the cpufreq sysfs store method, the lock sequence is: kn->count --> cpus_read_lock These sequences are actually safe as they are taking a share lock on cpu_hotplug_lock. However, the current lockdep code doesn't check for share locking when detecting circular lock dependency. Fixing that could be a substantial effort. Instead, we can work around this problem by using cpus_read_trylock() in the store method which is much simpler. The chance of not getting the read lock is very small. If that happens, the userspace application that writes the sysfs file will get an error. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-26cpufreq: trace frequency limits changeRuchi Kandoi1-0/+1
systrace used for tracing for Android systems has carried a patch for many years in the Android tree that traces when the cpufreq limits change. With the help of this information, systrace can know when the policy limits change and can visually display the data. Lets add upstream support for the same. Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-26Merge tag 'samsung-drivers-exynos5440-4.19' of ↵Olof Johansson3-467/+0
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers Exynos5440 drivers removal The Exynos5440 (quad-core A15 with GMAC, PCIe, SATA) was targeting server platforms but it did not make it to the market really. There are no development boards with it and probably there are no real products neither. The development for Exynos5440 ended in 2013 and since then the platform is in maintenance mode. Removing Exynos5440 makes our life slightly easier: less maintenance, smaller code, reduced number of quirks, no need to preserve DTB backward-compatibility. The Device Tree sources and some of the drivers for Exynos5440 were already removed. This removes remaining drivers. * tag 'samsung-drivers-exynos5440-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-25Merge back cpufreq material for 4.19.Rafael J. Wysocki6-14/+260
2018-07-24cpufreq: qcom-kryo: add NULL entry to the end of_device_id arrayYueHaibing1-0/+1
Make sure of_device_id tables are NULL terminated. Found by coccinelle spatch "misc/of_table.cocci" Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Ilia Lin <ilia.lin@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-19cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWPSrinivas Pandruvada1-0/+9
On HWP platforms with Turbo 3.0, the HWP capability max ratio shows the maximum ratio of that core, which can be different than other cores. If we show the correct maximum frequency in cpufreq sysfs via cpuinfo_max_freq and scaling_max_freq then, user can know which cores can run faster for pinning some high priority tasks. Currently the max turbo frequency is shown as max frequency, which is the max of all cores, even if some cores can't reach that frequency even for single threaded workload. But it is possible that max ratio in HWP capabilities is set as 0xFF or some high invalid value (E.g. One KBL NUC). Since the actual performance can never exceed 1 core turbo frequency from MSR TURBO_RATIO_LIMIT, we use this as a bound check. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-18cpufreq: intel_pstate: Register when ACPI PCCH is presentRafael J. Wysocki2-1/+20
Currently, intel_pstate doesn't register if _PSS is not present on HP Proliant systems, because it expects the firmware to take over CPU performance scaling in that case. However, if ACPI PCCH is present, the firmware expects the kernel to use it for CPU performance scaling and the pcc-cpufreq driver is loaded for that. Unfortunately, the firmware interface used by that driver is not scalable for fundamental reasons, so pcc-cpufreq is way suboptimal on systems with more than just a few CPUs. In fact, it is better to avoid using it at all. For this reason, modify intel_pstate to look for ACPI PCCH if _PSS is not present and register if it is there. Also prevent the pcc-cpufreq driver from trying to initialize itself if intel_pstate has been registered already. Fixes: fbbcdc0744da (intel_pstate: skip the driver if ACPI has power mgmt option) Reported-by: Andreas Herrmann <aherrmann@suse.com> Reviewed-by: Andreas Herrmann <aherrmann@suse.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Andreas Herrmann <aherrmann@suse.com> Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-18cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systemsRafael J. Wysocki1-0/+9
The firmware interface used by the pcc-cpufreq driver is fundamentally not scalable and using it for dynamic CPU performance scaling on systems with many CPUs leads to degraded performance. For this reason, disable dynamic CPU performance scaling on systems with pcc-cpufreq where the number of CPUs present at the driver init time is greater than 4. Also make the driver print corresponding complaints to the kernel log. Reported-by: Andreas Herrmann <aherrmann@suse.com> Tested-by: Andreas Herrmann <aherrmann@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-18cpufreq: qcom-kryo: Silently error out on EPROBE_DEFERNiklas Cassel1-2/+3
If of_nvmem_cell_get() fails due to probe deferal, we shouldn't print an error message. Just be silent in this case. Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-18cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPCGeorge Cherian1-0/+52
Per Section 8.4.7.1.3 of ACPI 6.2, the platform provides performance feedback via set of performance counters. To determine the actual performance level delivered over time, OSPM may read a set of performance counters from the Reference Performance Counter Register and the Delivered Performance Counter Register. OSPM calculates the delivered performance over a given time period by taking a beginning and ending snapshot of both the reference and delivered performance counters, and calculating: delivered_perf = reference_perf X (delta of delivered_perf counter / delta of reference_perf counter). Implement the above and hook this up to the cpufreq->get method. Signed-off-by: George Cherian <george.cherian@cavium.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-18cpufreq: armada-37xx: Add AVS supportGregory CLEMENT1-3/+160
Armada 37xx supports Adaptive Voltage Scaling and thanks to this patch a voltage is associated to each load level. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-17cpufreq: exynos: Remove support for Exynos5440Krzysztof Kozlowski3-467/+0
The Exynos5440 is not actively developed, there are no development boards available and probably there are no real products with it. Remove wide-tree support for Exynos5440. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-07-09cpufreq: powernv: Remove global pstate ramp-down timer in POWER9Shilpasri G Bhat1-4/+16
POWER9 does not support global pstate requests for the chip. So remove the timer logic which slowly ramps down the global pstate in P9 platforms. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [mpe: Drop NULL check before kfree(policy->driver_data)] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-02cpufreq: imx6q/thermal: imx: register cooling device depending on OFBastian Stender1-0/+21
The cooling device should be part of the i.MX cpufreq driver, but it cannot be removed for the sake of DT stability. So turn the cooling device registration into a separate function and perform the registration only if the CPU OF node does not have the #cooling-cells property. Use of_cpufreq_power_cooling_register in imx_thermal code to link the cooling device to the device tree node provided. This makes it possible to bind the cpufreq cooling device to a custom thermal zone via a cooling-maps entry like: cooling-maps { map0 { trip = <&board_alert>; cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; Assuming a cpu node exists with label "cpu0" and #cooling-cells property. Signed-off-by: Bastian Stender <bst@pengutronix.de> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-02cpufreq: intel_pstate: use match_string() helperXie Yisheng1-9/+6
match_string() returns the index of an array for a matching string, which can be used instead of open coded variant. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-25cpufreq: qcom-kryo: Fix error handling in probe()Dan Carpenter1-4/+4
We should return if get_cpu_device() fails or it leads to a NULL dereference. Also dev_pm_opp_of_get_opp_desc_node() returns NULL on error, it never returns error pointers. Fixes: 46e2856b8e18 (cpufreq: Add Kryo CPU scaling driver) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-19cpufreq: intel_pstate: Fix scaling max/min limits with Turbo 3.0Srinivas Pandruvada1-5/+22
When scaling max/min settings are changed, internally they are converted to a ratio using the max turbo 1 core turbo frequency. This works fine when 1 core max is same irrespective of the core. But under Turbo 3.0, this will not be the case. For example: Core 0: max turbo pstate: 43 (4.3GHz) Core 1: max turbo pstate: 45 (4.5GHz) In this case 1 core turbo ratio will be maximum of all, so it will be 45 (4.5GHz). Suppose scaling max is set to 4GHz (ratio 40) for all cores ,then on core one it will be = max_state * policy->max / max_freq; = 43 * (4000000/4500000) = 38 (3.8GHz) = 38 which is 200MHz less than the desired. On core2, it will be correctly set to ratio 40 (4GHz). Same holds true for scaling min frequency limit. So this requires usage of correct turbo max frequency for core one, which in this case is 4.3GHz. So we need to adjust per CPU cpu->pstate.turbo_freq using the maximum HWP ratio of that core. This change uses the HWP capability of a core to adjust max turbo frequency. But since Broadwell HWP doesn't use ratios in the HWP capabilities, we have to use legacy max 1 core turbo ratio. This is not a problem as the HWP capabilities don't differ among cores in Broadwell. We need to check for non Broadwell CPU model for applying this change, though. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: 4.6+ <stable@vger.kernel.org> # 4.6+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-19cpufreq: kryo: Add module remove and exitIlia Lin1-3/+19
Add device remove and module exit code to make the driver functioning as a loadable module. Fixes: ac28927659be (cpufreq: kryo: allow building as a loadable module) Signed-off-by: Ilia Lin <ilia.lin@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-19cpufreq: kryo: Fix possible error code dereferenceIlia Lin1-0/+3
In event of error returned by the nvmem_cell_read() non-pointer value may be dereferenced. Fix this with error handling. Additionally free the allocated speedbin buffer, as per the API. Fixes: 9ce36edd1a52 (cpufreq: Add Kryo CPU scaling driver) Signed-off-by: Ilia Lin <ilia.lin@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-13Merge tag 'pm-4.18-rc1-2' of ↵Linus Torvalds6-24/+209
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These revert a recent PM core change that introduced a regression, fix the build when the recently added Kryo cpufreq driver is selected, add support for devices attached to multiple power domains to the generic power domains (genpd) framework, add support for iowait boosting on systens with hardware-managed P-states (HWP) enabled to the intel_pstate driver, modify the behavior of the wakeup_count device attribute in sysfs, fix a few issues and clean up some ugliness, mostly in cpufreq (core and drivers) and in the cpupower utility. Specifics: - Revert a recent PM core change that attempted to fix an issue related to device links, but introduced a regression (Rafael Wysocki) - Fix build when the recently added cpufreq driver for Kryo processors is selected by making it possible to build that driver as a module (Arnd Bergmann) - Fix the long idle detection mechanism in the out-of-band (ondemand and conservative) cpufreq governors (Chen Yu) - Add support for devices in multiple power domains to the generic power domains (genpd) framework (Ulf Hansson) - Add support for iowait boosting on systems with hardware-managed P-states (HWP) enabled to the intel_pstate driver and make it use that feature on systems with Skylake Xeon processors as it is reported to improve performance significantly on those systems (Srinivas Pandruvada) - Fix and update the acpi_cpufreq, ti-cpufreq and imx6q cpufreq drivers (Colin Ian King, Suman Anna, Sébastien Szymanski) - Change the behavior of the wakeup_count device attribute in sysfs to expose the number of events when the device might have aborted system suspend in progress (Ravi Chandra Sadineni) - Fix two minor issues in the cpupower utility (Abhishek Goel, Colin Ian King)" * tag 'pm-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "PM / runtime: Fixup reference counting of device link suppliers at probe" cpufreq: imx6q: check speed grades for i.MX6ULL cpufreq: governors: Fix long idle detection logic in load calculation cpufreq: intel_pstate: enable boost for Skylake Xeon PM / wakeup: Export wakeup_count instead of event_count via sysfs PM / Domains: Add dev_pm_domain_attach_by_id() to manage multi PM domains PM / Domains: Add support for multi PM domains per device to genpd PM / Domains: Split genpd_dev_pm_attach() PM / Domains: Don't attach devices in genpd with multi PM domains PM / Domains: dt: Allow power-domain property to be a list of specifiers cpufreq: intel_pstate: New sysfs entry to control HWP boost cpufreq: intel_pstate: HWP boost performance on IO wakeup cpufreq: intel_pstate: Add HWP boost utility and sched util hooks cpufreq: ti-cpufreq: Use devres managed API in probe() cpufreq: ti-cpufreq: Fix an incorrect error return value cpufreq: ACPI: make function acpi_cpufreq_fast_switch() static cpufreq: kryo: allow building as a loadable module cpupower : Fix header name to read idle state name cpupower: fix spelling mistake: "logilename" -> "logfilename"
2018-06-13Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds13-17/+19
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-13treewide: Use array_size() in vzalloc()Kees Cook1-1/+1
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook2-2/+3
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook9-13/+14
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+1
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This contains platform-related driver updates for ARM and ARM64. Highlights: - ARM SCMI (System Control & Management Interface) driver cleanups - Hisilicon support for LPC bus w/ ACPI - Reset driver updates for several platforms: Uniphier, - Rockchip power domain bindings and hardware descriptions for several SoCs. - Tegra memory controller reset improvements" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (59 commits) ARM: tegra: fix compile-testing PCI host driver soc: rockchip: power-domain: add power domain support for px30 dt-bindings: power: add binding for px30 power domains dt-bindings: power: add PX30 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3228 dt-bindings: power: add binding for rk3228 power domains dt-bindings: power: add RK3228 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3128 dt-bindings: power: add binding for rk3128 power domains dt-bindings: power: add RK3128 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3036 dt-bindings: power: add binding for rk3036 power domains dt-bindings: power: add RK3036 SoCs header for power-domain dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Register SMMU after MC driver became ready soc: mediatek: remove unneeded semicolon soc: mediatek: add a fixed wait for SRAM stable soc: mediatek: introduce a CAPS flag for scp_domain_data soc: mediatek: reuse regmap_read_poll_timeout helpers ...
2018-06-11cpufreq: imx6q: check speed grades for i.MX6ULLSébastien Szymanski1-6/+23
Check the max speed supported from the fuses for i.MX6ULL and update the operating points table accordingly. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-08cpufreq: governors: Fix long idle detection logic in load calculationChen Yu1-7/+5
According to current code implementation, detecting the long idle period is done by checking if the interval between two adjacent utilization update handlers is long enough. Although this mechanism can detect if the idle period is long enough (no utilization hooks invoked during idle period), it might not cover a corner case: if the task has occupied the CPU for too long which causes no context switches during that period, then no utilization handler will be launched until this high prio task is scheduled out. As a result, the idle_periods field might be calculated incorrectly because it regards the 100% load as 0% and makes the conservative governor who uses this field confusing. Change the detection to compare the idle_time with sampling_rate directly. Reported-by: Artem S. Tashkinov <t.artem@mailcity.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-08cpufreq: intel_pstate: enable boost for Skylake XeonSrinivas Pandruvada1-0/+10
Enable HWP boost on Skylake server and workstations. Reported-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06cpufreq: intel_pstate: New sysfs entry to control HWP boostSrinivas Pandruvada1-0/+30
A new attribute is added to intel_pstate sysfs to enable/disable HWP dynamic performance boost. Reported-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06cpufreq: intel_pstate: HWP boost performance on IO wakeupSrinivas Pandruvada1-0/+39
This change uses SCHED_CPUFREQ_IOWAIT flag to boost HWP performance. Since SCHED_CPUFREQ_IOWAIT flag is set frequently, we don't start boosting steps unless we see two consecutive flags in two ticks. This avoids boosting due to IO because of regular system activities. To avoid synchronization issues, the actual processing of the flag is done on the local CPU callback. Reported-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06cpufreq: intel_pstate: Add HWP boost utility and sched util hooksSrinivas Pandruvada1-3/+97
Added two utility functions to HWP boost up gradually and boost down to the default cached HWP request values. Boost up: Boost up updates HWP request minimum value in steps. This minimum value can reach upto at HWP request maximum values depends on how frequently, this boost up function is called. At max, boost up will take three steps to reach the maximum, depending on the current HWP request levels and HWP capabilities. For example, if the current settings are: If P0 (Turbo max) = P1 (Guaranteed max) = min No boost at all. If P0 (Turbo max) > P1 (Guaranteed max) = min Should result in one level boost only for P0. If P0 (Turbo max) = P1 (Guaranteed max) > min Should result in two level boost: (min + p1)/2 and P1. If P0 (Turbo max) > P1 (Guaranteed max) > min Should result in three level boost: (min + p1)/2, P1 and P0. We don't set any level between P0 and P1 as there is no guarantee that they will be honored. Boost down: After the system is idle for hold time of 3ms, the HWP request is reset to the default value from HWP init or user modified one via sysfs. Caching of HWP Request and Capabilities Store the HWP request value last set using MSR_HWP_REQUEST and read MSR_HWP_CAPABILITIES. This avoid reading of MSRs in the boost utility functions. These boost utility functions calculated limits are based on the latest HWP request value, which can be modified by setpolicy() callback. So if user space modifies the minimum perf value, that will be accounted for every time the boost up is called. There will be case when there can be contention with the user modified minimum perf, in that case user value will gain precedence. For example just before HWP_REQUEST MSR is updated from setpolicy() callback, the boost up function is called via scheduler tick callback. Here the cached MSR value is already the latest and limits are updated based on the latest user limits, but on return the MSR write callback called from setpolicy() callback will update the HWP_REQUEST value. This will be used till next time the boost up function is called. In addition add a variable to control HWP dynamic boosting. When HWP dynamic boost is active then set the HWP specific update util hook. The contents in the utility hooks will be filled in the subsequent patches. Reported-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06cpufreq: ti-cpufreq: Use devres managed API in probe()Suman Anna1-5/+2
The ti_cpufreq_probe() function uses regular kzalloc to allocate the ti_cpufreq_data structure and kfree for freeing this memory on failures. Simplify this code by using the devres managed API. Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06cpufreq: ti-cpufreq: Fix an incorrect error return valueSuman Anna1-1/+1
Commit 05829d9431df (cpufreq: ti-cpufreq: kfree opp_data when failure) has fixed a memory leak in the failure path, however the patch returned a positive value on get_cpu_device() failure instead of the previous negative value. Fix this incorrect error return value properly. Fixes: 05829d9431df (cpufreq: ti-cpufreq: kfree opp_data when failure) Cc: 4.14+ <stable@vger.kernel.org> # v4.14+ Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06cpufreq: ACPI: make function acpi_cpufreq_fast_switch() staticColin Ian King1-2/+2
The acpi_cpufreq_fast_switch() function is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: drivers/cpufreq/acpi-cpufreq.c:468:14: warning: symbol 'acpi_cpufreq_fast_switch' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06cpufreq: kryo: allow building as a loadable moduleArnd Bergmann1-1/+1
Building the kryo cpufreq driver while QCOM_SMEM is a loadable module results in a link error: drivers/cpufreq/qcom-cpufreq-kryo.o: In function `qcom_cpufreq_kryo_probe': qcom-cpufreq-kryo.c:(.text+0xbc): undefined reference to `qcom_smem_get' The problem is that Kconfig ignores interprets the dependency as met when the dependent symbol is a 'bool' one. By making it 'tristate', it will be forced to be a module here, which builds successfully. Fixes: 46e2856b8e18 (cpufreq: Add Kryo CPU scaling driver) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-05Merge tag 'acpi-4.18-rc1' of ↵Linus Torvalds1-12/+68
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to the 20180508 upstream revision and make it support the RT patch, add CPPC v3 support to the ACPI CPPC library, add a WDAT-based watchdog quirk to prevent clashes with the RTC, add quirks to the ACPI AC and battery drivers, and update the ACPI SoC drivers. Specifics: - Update the ACPICA code in the kernel to the 20180508 upstream revision including: * iASL -tc option enhancement (Bob Moore). * Debugger improvements (Bob Moore). * Support for tables larger than 1 MB in acpidump/acpixtract (Bob Moore). * Minor fixes and cleanups (Colin Ian King, Toomas Soome). - Make the ACPICA code in the kernel support the RT patch (Sebastian Andrzej Siewior, Steven Rostedt). - Add a kmemleak annotation to the ACPICA code (Larry Finger). - Add CPPC v3 support to the ACPI CPPC library and fix two issues related to CPPC (Prashanth Prakash, Al Stone). - Add an ACPI WDAT-based watchdog quirk to prefer iTCO_wdt on systems where WDAT clashes with the RTC SRAM (Mika Westerberg). - Add some quirks to the ACPI AC and battery drivers (Carlo Caione, Hans de Goede). - Update the ACPI SoC drivers for Intel (LPSS) and AMD (APD) platforms (Akshu Agrawal, Hans de Goede). - Fix up some assorted minor issues (Al Stone, Laszlo Toth, Mathieu Malaterre)" * tag 'acpi-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) ACPICA: Mark acpi_ut_create_internal_object_dbg() memory allocations as non-leaks ACPI / watchdog: Prefer iTCO_wdt always when WDAT table uses RTC SRAM mailbox: PCC: erroneous error message when parsing ACPI PCCT ACPICA: Update version to 20180508 ACPICA: acpidump/acpixtract: Support for tables larger than 1MB ACPI: APD: Add AMD misc clock handler support clk: x86: Add ST oscout platform clock ACPICA: Update version to 20180427 ACPICA: Debugger: Removed direct support for EC address space in "Test Objects" ACPICA: Debugger: Add Package support for "test objects" command ACPICA: Improve error messages for the namespace root node ACPICA: Fix potential infinite loop in acpi_rs_dump_byte_list ACPICA: vsnprintf: this statement may fall through ACPICA: Tables: Fix spelling mistake in comment ACPICA: iASL: Enhance the -tc option (create AML hex file in C) ACPI: Add missing prototype_for arch_post_acpi_subsys_init() ACPI / tables: improve comments regarding acpi_parse_entries_array() ACPICA: Convert acpi_gbl_hardware lock back to an acpi_raw_spinlock ACPICA: provide abstraction for raw_spinlock_t ACPI / CPPC: Fix invalid PCC channel status errors ...
2018-06-04Merge branches 'acpi-cppc', 'acpi-misc', 'acpi-battery' and 'acpi-ac'Rafael J. Wysocki1-12/+68
* acpi-cppc: mailbox: PCC: erroneous error message when parsing ACPI PCCT ACPI / CPPC: Fix invalid PCC channel status errors ACPI / CPPC: Document CPPC sysfs interface cpufreq / CPPC: Support for CPPC v3 ACPI / CPPC: Check for valid PCC subspace only if PCC is used ACPI / CPPC: Add support for CPPC v3 * acpi-misc: ACPI: Add missing prototype_for arch_post_acpi_subsys_init() ACPI: add missing newline to printk * acpi-battery: ACPI / battery: Add quirk to avoid checking for PMIC with native driver ACPI / battery: Ignore AC state in handle_discharging on systems where it is broken ACPI / battery: Add handling for devices which wrongly report discharging state ACPI / battery: Remove initializer for unused ident dmi_system_id ACPI / AC: Remove initializer for unused ident dmi_system_id * acpi-ac: ACPI / AC: Add quirk to avoid checking for PMIC with native driver
2018-06-04Merge branches 'pm-cpufreq-sched' and 'pm-cpuidle'Rafael J. Wysocki1-1/+1
* pm-cpufreq-sched: cpufreq: schedutil: Avoid missing updates for one-CPU policies schedutil: Allow cpufreq requests to be made even when kthread kicked cpufreq: Rename cpufreq_can_do_remote_dvfs() cpufreq: schedutil: Cleanup and document iowait boost cpufreq: schedutil: Fix iowait boost reset cpufreq: schedutil: Don't set next_freq to UINT_MAX Revert "cpufreq: schedutil: Don't restrict kthread to related_cpus unnecessarily" * pm-cpuidle: cpuidle: governors: Consolidate PM QoS handling cpuidle: governors: Drop redundant checks related to PM QoS
2018-05-30cpufreq: Add Kryo CPU scaling driverIlia Lin4-0/+227
In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors, the CPU frequency subset and voltage value of each OPP varies based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables defines the voltage and frequency value based on the msm-id in SMEM and speedbin blown in the efuse combination. The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC to provide the OPP framework with required information. This is used to determine the voltage and frequency value for each OPP of operating-points-v2 table when it is parsed by the OPP framework. Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-30cpufreq: Use static SRCU initializerSebastian Andrzej Siewior1-12/+1
Use the static SRCU initializer for `cpufreq_transition_notifier_list'. This avoids the init_cpufreq_transition_notifier_list() initcall. Its only purpose is to initialize the SRCU notifier once during boot and set another variable which is used as an indicator whether the init was perfromed before cpufreq_register_notifier() was used. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-30cpufreq: Fix new policy initialization during limits updates via sysfsTao Wang1-0/+2
If the policy limits are updated via cpufreq_update_policy() and subsequently via sysfs, the limits stored in user_policy may be set incorrectly. For example, if both min and max are set via sysfs to the maximum available frequency, user_policy.min and user_policy.max will also be the maximum. If a policy notifier triggered by cpufreq_update_policy() lowers both the min and the max at this point, that change is not reflected by the user_policy limits, so if the max is updated again via sysfs to the same lower value, then user_policy.max will be lower than user_policy.min which shouldn't happen. In particular, if one of the policy CPUs is then taken offline and back online, cpufreq_set_policy() will fail for it due to a failing limits check. To prevent that from happening, initialize the min and max fields of the new_policy object to the ones stored in user_policy that were previously set via sysfs. Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject & changelog ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>