summaryrefslogtreecommitdiff
path: root/drivers/cpufreq
AgeCommit message (Collapse)AuthorFilesLines
2019-07-23cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()Wen Yang1-14/+9
The cpu variable is still being used in the of_get_property() call after the of_node_put() call, which may result in use-after-free. Fixes: a9acc26b75f6 ("cpufreq/pasemi: fix possible object reference leak") Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-18Merge branch 'pm-cpufreq'Rafael J. Wysocki21-139/+198
* pm-cpufreq: cpufreq: Make cpufreq_generic_init() return void cpufreq: imx-cpufreq-dt: Add i.MX8MN support cpufreq: Add QoS requests for userspace constraints cpufreq: intel_pstate: Reuse refresh_frequency_limits() cpufreq: Register notifiers with the PM QoS framework PM / QoS: Add support for MIN/MAX frequency constraints PM / QOS: Pass request type to dev_pm_qos_read_value() PM / QOS: Rename __dev_pm_qos_read_value() and dev_pm_qos_raw_read_value() PM / QOS: Pass request type to dev_pm_qos_{add|remove}_notifier()
2019-07-16cpufreq: Make cpufreq_generic_init() return voidViresh Kumar19-70/+45
It always returns 0 (success) and its return type should really be void. Over that, many drivers have added error handling code based on its return value, which is not required at all. Change its return type to void and update all the callers. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-09cpufreq: imx-cpufreq-dt: Add i.MX8MN supportAnson Huang1-1/+2
i.MX8MN is a new SoC of i.MX8M series, it also uses speed grading and market segment fuses for OPP definitions, add support for this SoC. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-09cpufreq: Add QoS requests for userspace constraintsViresh Kumar1-43/+55
This implements QoS requests to manage userspace configuration of min and max frequency. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: syzbot <syzbot+de771ae9390dffed7266@syzkaller.appspotmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-09cpufreq: intel_pstate: Reuse refresh_frequency_limits()Viresh Kumar2-7/+3
The implementation of intel_pstate_update_max_freq() is quite similar to refresh_frequency_limits(), lets reuse it. Finding minimum of policy->user_policy.max and policy->cpuinfo.max_freq in intel_pstate_update_max_freq() is redundant as cpufreq_set_policy() will call the ->verify() callback of intel-pstate driver, which will do this comparison anyway and so dropping it from intel_pstate_update_max_freq() doesn't harm. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-09cpufreq: Register notifiers with the PM QoS frameworkViresh Kumar1-30/+105
Register notifiers for min/max frequency constraints with the PM QoS framework. The constraints are also taken into consideration in cpufreq_set_policy(). This also relocates cpufreq_policy_put_kobj() as it is required to be called from cpufreq_policy_alloc() now. refresh_frequency_limits() is updated to avoid calling cpufreq_set_policy() for inactive policies and handle_update() is updated to have proper locking in place. No constraints are added until now though. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-08Merge branch 'pm-cpufreq'Rafael J. Wysocki10-80/+281
* pm-cpufreq: cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update() cpufreq: Consolidate cpufreq_update_current_freq() and __cpufreq_get() cpufreq: Don't skip frequency validation for has_target() drivers cpufreq: Use has_target() instead of !setpolicy cpufreq: Remove redundant !setpolicy check cpufreq: Move the IS_ENABLED(CPU_THERMAL) macro into a stub cpufreq: s5pv210: Don't flood kernel log after cpufreq change cpufreq: pcc-cpufreq: Fail initialization if driver cannot be registered cpufreq: add driver for Raspberry Pi cpufreq: Switch imx7d to imx-cpufreq-dt for speed grading cpufreq: imx-cpufreq-dt: Remove global platform match list cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency cpufreq: brcmstb-avs-cpufreq: Fix initial command check cpufreq: armada-37xx: Remove set but not used variable 'freq' cpufreq: imx-cpufreq-dt: Fix no OPPs available on unfused parts dt-bindings: imx-cpufreq-dt: Document opp-supported-hw usage cpufreq: Add imx-cpufreq-dt driver
2019-06-28cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update()Viresh Kumar1-10/+16
On some occasions cpufreq_verify_current_freq() schedules a work whose callback is handle_update(), which further calls cpufreq_update_policy() which may end up calling cpufreq_verify_current_freq() again. On the other hand, when cpufreq_update_policy() is called from handle_update(), the pointer to the cpufreq policy is already available, but cpufreq_cpu_acquire() is still called to get it in cpufreq_update_policy(), which should be avoided as well. To fix these issues, create a new helper, refresh_frequency_limits(), and make both handle_update() call it cpufreq_update_policy(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Rename reeval_frequency_limits() as refresh_frequency_limits() ] [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-28cpufreq: Consolidate cpufreq_update_current_freq() and __cpufreq_get()Viresh Kumar1-42/+28
Their implementations are quite similar, so modify cpufreq_update_current_freq() somewhat and call it from __cpufreq_get(). Also rename cpufreq_update_current_freq() to cpufreq_verify_current_freq(), as that's what it is doing. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-28cpufreq: Don't skip frequency validation for has_target() driversViresh Kumar1-8/+5
CPUFREQ_CONST_LOOPS was introduced in a very old commit from pre-2.6 kernel release by commit 6a4a93f9c0d5 ("[CPUFREQ] Fix 'out of sync' issue"). Basically, that commit does two things: - It adds the frequency verification code (which is quite similar to what we have today as well). - And it sets the CPUFREQ_CONST_LOOPS flag only for setpolicy drivers, rightly so based on the code we had then. The idea was to avoid frequency validation for setpolicy drivers as the cpufreq core doesn't know what frequency the hardware is running at and so no point in doing frequency verification. The problem happened when we started to use the same CPUFREQ_CONST_LOOPS flag for constant loops-per-jiffy thing as well and many has_target() drivers started using the same flag and unknowingly skipped the verification of frequency. There is no logical reason behind skipping frequency validation because of the presence of CPUFREQ_CONST_LOOPS flag otherwise. Fix this issue by skipping frequency validation only for setpolicy drivers and always doing it for has_target() drivers irrespective of the presence or absence of CPUFREQ_CONST_LOOPS flag. cpufreq_notify_transition() is only called for has_target() type driver and not for set_policy type, and the check is simply redundant. Remove it as well. Also remove () around freq comparison statement as they aren't required and checkpatch also warns for them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-26cpufreq: Use has_target() instead of !setpolicyViresh Kumar1-3/+3
For code consistency, use has_target() instead of !setpolicy everywhere, as it is already done at several places. Maybe we should also use "!has_target()" instead of "cpufreq_driver->setpolicy" where we need to check if the driver supports setpolicy, so to use only one expression for this kind of differentiation. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-26cpufreq: Remove redundant !setpolicy checkViresh Kumar1-1/+1
cpufreq_start_governor() is only called for !setpolicy case, checking it again is not required. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-26cpufreq: Move the IS_ENABLED(CPU_THERMAL) macro into a stubDaniel Lezcano1-4/+2
cpufreq_online() and cpufreq_offline() [un]register the driver as a cooling device. This is done if the driver is flagged as a cooling device in addition with an IS_ENABLED() check to compile out the branching code. Group this test in a stub function added in the cpufreq header instead of having the IS_ENABLED() in the code. Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-26Merge branch 'cpufreq/arm/linux-next' of ↵Rafael J. Wysocki8-11/+225
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq changes for v5.3 from Viresh Kumar: "This pull request contains: - Minor fixes for brcmstb driver (Florian). - New imx-cpufreq driver, its bindings and code around it (Leonard). - New Raspberry Pi driver (Nicolas). - Minor fix for s5pv210 driver (Pawel). - Minor cleanup for armada driver (YueHaibing)." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: s5pv210: Don't flood kernel log after cpufreq change cpufreq: add driver for Raspberry Pi cpufreq: Switch imx7d to imx-cpufreq-dt for speed grading cpufreq: imx-cpufreq-dt: Remove global platform match list cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency cpufreq: brcmstb-avs-cpufreq: Fix initial command check cpufreq: armada-37xx: Remove set but not used variable 'freq' cpufreq: imx-cpufreq-dt: Fix no OPPs available on unfused parts dt-bindings: imx-cpufreq-dt: Document opp-supported-hw usage cpufreq: Add imx-cpufreq-dt driver
2019-06-24cpufreq: s5pv210: Don't flood kernel log after cpufreq changePaweł Chmiel1-1/+1
This commit replaces printk with pr_debug, so we don't flood kernel log. Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner35-148/+35
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 235Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 53 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.904365654@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-17cpufreq: pcc-cpufreq: Fail initialization if driver cannot be registeredDavid Arcari1-2/+2
Make pcc_cpufreq_init() return error codes when the driver cannot be registered. Otherwise the driver can shows up loaded via lsmod even though it failed initialization. This is confusing to the user. Signed-off-by: David Arcari <darcari@redhat.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-13cpufreq: add driver for Raspberry PiNicolas Saenz Julienne3-0/+106
Raspberry Pi's firmware offers and interface though which update it's performance requirements. It allows us to request for specific runtime frequencies, which the firmware might or might not respect, depending on the firmware configuration and thermals. As the maximum and minimum frequencies are configurable in the firmware there is no way to know in advance their values. So the Raspberry Pi cpufreq driver queries them, builds an opp frequency table to then launch cpufreq-dt. Also, as the firmware interface might be configured as a module, making the cpu clock unavailable during init, this implements a full fledged driver, as opposed to most drivers registering cpufreq-dt, which only make use of an init routine. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Eric Anholt <eric@anholt.net> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-06-06cpufreq: Switch imx7d to imx-cpufreq-dt for speed gradingLeonard Crestez1-1/+1
This driver can handle speed grading bits on imx7d just like on imx8mq and imx8mm. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-06-06cpufreq: imx-cpufreq-dt: Remove global platform match listLeonard Crestez1-16/+2
This is not currently needed, instead a platform device is always created from SOC-specific code. We can use of_machine_is_compatible for per-SOC behavior instead. Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441Thomas Gleixner2-10/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 315 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 347Thomas Gleixner1-3/+1
Based on 1 normalized pattern(s): your use of this code is subject to the terms and conditions of the gnu general public license version 2 see copying or http www gnu org licenses gpl html extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 3 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000437.701946635@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 312Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the version 2 of the gnu general public license as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 3 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000434.524820338@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner2-19/+2
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-04cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequencyFlorian Fainelli1-4/+4
What we read back from the register is going to be capped at 32-bits, and cpufreq_freq_table.frequency is an unsigned int. Avoid any possible value truncation by using the appropriate return value. Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-06-04cpufreq: brcmstb-avs-cpufreq: Fix initial command checkFlorian Fainelli1-2/+2
There is a logical error in brcm_avs_is_firmware_loaded() whereby if the firmware returns -EINVAL, we will be reporting this as an error. The comment is correct, the code was not. Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-06-03cpufreq: armada-37xx: Remove set but not used variable 'freq'YueHaibing1-3/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/cpufreq/armada-37xx-cpufreq.c: In function 'armada37xx_cpufreq_avs_setup': drivers/cpufreq/armada-37xx-cpufreq.c:260:28: warning: variable 'freq' set but not used [-Wunused-but-set-variable] It's never used since introduction in commit 1c3528232f4b ("cpufreq: armada-37xx: Add AVS support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-06-03cpufreq: imx-cpufreq-dt: Fix no OPPs available on unfused partsLeonard Crestez1-0/+15
Early samples without fuses written report "0 0" which means consumer segment and minimum speed grading. According to datasheet the minimum speed grade is not supported for consumer parts so all OPPs are disabled which results in stack dumps later on. Fix by clamping minimum consumer speed grade to 1 on imx8mm and imx8mq. Fixes: 4d28ba1d62c4 ("cpufreq: Add imx-cpufreq-dt driver") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> [ Viresh: s/minumum/minimum/ in patch and log ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner2-18/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 166Thomas Gleixner13-26/+13
Based on 1 normalized pattern(s): licensed under the terms of the gnu gpl license version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 62 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.929121379@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner3-50/+3
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 153Thomas Gleixner4-57/+4
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 77 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.837555891@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner5-27/+5
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118Thomas Gleixner1-11/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 44 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190523091651.032047323@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner4-0/+4
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner4-0/+4
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-20cpufreq: Add imx-cpufreq-dt driverLeonard Crestez4-0/+109
Right now in upstream imx8m cpufreq support just lists a common subset of OPPs because the higher ones should only be attempted after checking speed grading in fuses. Add a small driver which checks speed grading from nvmem cells before registering cpufreq-dt. This driver allows unlocking all frequencies for imx8mm and imx8mq and could be applied to other chips like imx7d Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-05-17Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk framework updates from Stephen Boyd: "One more patch to remove io.h from clk-provider.h. We used to need this include when we had clk_readl() and clk_writel(), but those are gone now so this patch pushes the dependency out to the users of clk-provider.h" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Remove io.h from clk-provider.h
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd1-0/+1
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-15Merge tag 'pm-5.2-rc1-2' of ↵Linus Torvalds1-60/+80
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These fix a recent regression causing kernels built with CONFIG_PM unset to crash on systems that support the Performance and Energy Bias Hint (EPB), clean up the cpufreq core and some users of transition notifiers and introduce a new power domain flag into the generic power domains framework (genpd). Specifics: - Fix recent regression causing kernels built with CONFIG_PM unset to crash on systems that support the Performance and Energy Bias Hint (EPB) by avoiding to compile the EPB-related code depending on CONFIG_PM when it is unset (Rafael Wysocki). - Clean up the transition notifier invocation code in the cpufreq core and change some users of cpufreq transition notifiers accordingly (Viresh Kumar). - Change MAINTAINERS to cover the schedutil governor as part of cpufreq (Viresh Kumar). - Simplify cpufreq_init_policy() to avoid redundant computations (Yue Hu). - Add explanatory comment to the cpufreq core (Rafael Wysocki). - Introduce a new flag, GENPD_FLAG_RPM_ALWAYS_ON, to the generic power domains (genpd) framework along with the first user of it (Leonard Crestez)" * tag 'pm-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: soc: imx: gpc: Use GENPD_FLAG_RPM_ALWAYS_ON for ERR009619 PM / Domains: Add GENPD_FLAG_RPM_ALWAYS_ON flag cpufreq: Update MAINTAINERS to include schedutil governor cpufreq: Don't find governor for setpolicy drivers in cpufreq_init_policy() cpufreq: Explain the kobject_put() in cpufreq_policy_alloc() cpufreq: Call transition notifier only once for each policy x86: intel_epb: Take CONFIG_PM into account
2019-05-13cpufreq: Don't find governor for setpolicy drivers in cpufreq_init_policy()Yue Hu1-51/+65
In cpufreq_init_policy() we will check if there's last_governor for target and setpolicy type. However last_governor is set only if has_target() is true in cpufreq_offline(). That means find last_governor for setpolicy type is pointless. Also new_policy.governor will not be used if ->setpolicy callback is set in cpufreq_set_policy(). Moreover, there's duplicate ->setpolicy check in using default policy path. Let's add a new helper function to avoid it. Also update comments. Signed-off-by: Yue Hu <huyue2@yulong.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-13cpufreq: Explain the kobject_put() in cpufreq_policy_alloc()Rafael J. Wysocki1-0/+5
It may not be particularly clear why the kobject_put() after failing kobject_init_and_add() in cpufreq_policy_alloc() is not redundant, so add a comment to explain that. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-05-10cpufreq: Call transition notifier only once for each policyViresh Kumar1-9/+10
Currently, the notifiers are called once for each CPU of the policy->cpus cpumask. It would be more optimal if the notifier can be called only once and all the relevant information be provided to it. Out of the 23 drivers that register for the transition notifiers today, only 4 of them do per-cpu updates and the callback for the rest can be called only once for the policy without any impact. This would also avoid multiple function calls to the notifier callbacks and reduce multiple iterations of notifier core's code (which does locking as well). This patch adds pointer to the cpufreq policy to the struct cpufreq_freqs, so the notifier callback has all the information available to it with a single call. The five drivers which perform per-cpu updates are updated to use the cpufreq policy. The freqs->cpu field is redundant now and is removed. Acked-by: David S. Miller <davem@davemloft.net> (sparc) Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-07Merge tag 'printk-for-5.2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow state reset of printk_once() calls. - Prevent crashes when dereferencing invalid pointers in vsprintf(). Only the first byte is checked for simplicity. - Make vsprintf warnings consistent and inlined. - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf modifiers. - Some clean up of vsprintf and test_printf code. * tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: lib/vsprintf: Make function pointer_string static vsprintf: Limit the length of inlined error messages vsprintf: Avoid confusion between invalid address and value vsprintf: Prevent crash when dereferencing invalid pointers vsprintf: Consolidate handling of unknown pointer specifiers vsprintf: Factor out %pO handler as kobject_string() vsprintf: Factor out %pV handler as va_format() vsprintf: Factor out %p[iI] handler as ip_addr_string() vsprintf: Do not check address of well-known strings vsprintf: Consistent %pK handling for kptr_restrict == 0 vsprintf: Shuffle restricted_pointer() printk: Tie printk_once / printk_deferred_once into .data.once for reset treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively lib/test_printf: Switch to bitmap_zalloc()
2019-04-30cpufreq: Fix kobject memleakViresh Kumar2-0/+3
Currently the error return path from kobject_init_and_add() is not followed by a call to kobject_put() - which means we are leaking the kobject. Fix it by adding a call to kobject_put() in the error path of kobject_init_and_add(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Tobin C. Harding <tobin@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-30Merge branch 'cpufreq/arm/linux-next' of ↵Rafael J. Wysocki8-18/+38
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm-cpufreq Pull ARM cpufreq drivers changes for v5.2 from Viresh Kumar: "This pull request contains: - Fix for possible object reference leak for few drivers (Wen Yang). - Fix for armada frequency calculation (Gregory). - Code cleanup in maple driver (Viresh). This contains some non-ARM bits as well this time as the patches were picked up from a series." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: armada-37xx: fix frequency calculation for opp cpufreq: maple: Remove redundant code from maple_cpufreq_init() cpufreq: ppc_cbe: fix possible object reference leak cpufreq: pmac32: fix possible object reference leak cpufreq/pasemi: fix possible object reference leak cpufreq: maple: fix possible object reference leak cpufreq: kirkwood: fix possible object reference leak cpufreq: imx6q: fix possible object reference leak cpufreq: ap806: fix possible object reference leak
2019-04-29cpufreq: armada-37xx: fix frequency calculation for oppGregory CLEMENT1-3/+19
The frequency calculation was based on the current(max) frequency of the CPU. However for low frequency, the value used was already the parent frequency divided by a factor of 2. Instead of using this frequency, this fix directly get the frequency from the parent clock. Fixes: 92ce45fb875d ("cpufreq: Add DVFS support for Armada 37xx") Cc: <stable@vger.kernel.org> Reported-by: Christian Neubert <christian.neubert.86@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>