| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The previous function amd_get_highest_perf() will be deprecated.
It can only return 166 or 255 by cpuinfo. For platforms that
support preferred core, the value of highest perf can be between
166 and 255. Therefore, it will cause amd-pstate-ut to fail when
run amd_pstate_ut_check_perf().
Signed-off-by: Meng Li <li.meng@amd.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
DYNAMIC_POWER does not seem to be used anywhere in the tree, remove it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
All Qualcomm platforms utilizing the qcom-cpufreq-hw driver have no
business in using cpufreq-dt. Prevent that from happening.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
In commit 3666062b87ec ("cpufreq: amd-pstate: move to use bus_get_dev_root()")
the "amd_pstate" attributes where moved from a dedicated kobject to the
cpu root kobject.
While the dedicated kobject expects to contain kobj_attributes the root
kobject needs device_attributes.
As the changed arguments are not used by the callbacks it works most of
the time.
However CFI will detect this issue:
[ 4947.849350] CFI failure at dev_attr_show+0x24/0x60 (target: show_status+0x0/0x70; expected type: 0x8651b1de)
...
[ 4947.849409] Call Trace:
[ 4947.849410] <TASK>
[ 4947.849411] ? __warn+0xcf/0x1c0
[ 4947.849414] ? dev_attr_show+0x24/0x60
[ 4947.849415] ? report_cfi_failure+0x4e/0x60
[ 4947.849417] ? handle_cfi_failure+0x14c/0x1d0
[ 4947.849419] ? __cfi_show_status+0x10/0x10
[ 4947.849420] ? handle_bug+0x4f/0x90
[ 4947.849421] ? exc_invalid_op+0x1a/0x60
[ 4947.849422] ? asm_exc_invalid_op+0x1a/0x20
[ 4947.849424] ? __cfi_show_status+0x10/0x10
[ 4947.849425] ? dev_attr_show+0x24/0x60
[ 4947.849426] sysfs_kf_seq_show+0xa6/0x110
[ 4947.849433] seq_read_iter+0x16c/0x4b0
[ 4947.849436] vfs_read+0x272/0x2d0
[ 4947.849438] ksys_read+0x72/0xe0
[ 4947.849439] do_syscall_64+0x76/0xb0
[ 4947.849440] ? do_user_addr_fault+0x252/0x650
[ 4947.849442] ? exc_page_fault+0x7a/0x1b0
[ 4947.849443] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fixes: 3666062b87ec ("cpufreq: amd-pstate: move to use bus_get_dev_root()")
Reported-by: Jannik Glückert <jannik.glueckert@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217765
Link: https://lore.kernel.org/lkml/c7f1bf9b-b183-bf6e-1cbb-d43f72494083@gmail.com/
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Allocate extra space for terminating element at:
drivers/cpufreq/brcmstb-avs-cpufreq.c:
449 table[i].frequency = CPUFREQ_TABLE_END;
and add code comment to make this clear.
This fixes the following -Warray-bounds warning seen after building
ARM with multi_v7_defconfig (GCC 13):
In function 'brcm_avs_get_freq_table',
inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15:
drivers/cpufreq/brcmstb-avs-cpufreq.c:449:28: warning: array subscript 5 is outside array bounds of 'void[60]' [-Warray-bounds=]
449 | table[i].frequency = CPUFREQ_TABLE_END;
In file included from include/linux/node.h:18,
from include/linux/cpu.h:17,
from include/linux/cpufreq.h:12,
from drivers/cpufreq/brcmstb-avs-cpufreq.c:44:
In function 'devm_kmalloc_array',
inlined from 'devm_kcalloc' at include/linux/device.h:328:9,
inlined from 'brcm_avs_get_freq_table' at drivers/cpufreq/brcmstb-avs-cpufreq.c:437:10,
inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15:
include/linux/device.h:323:16: note: at offset 60 into object of size 60 allocated by 'devm_kmalloc'
323 | return devm_kmalloc(dev, bytes, flags);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -Warray-bounds.
Link: https://github.com/KSPP/linux/issues/324
Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add the MSM8998 to the blocklist since the CPU scaling on this platform
is handled by a separate driver.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Acked-by: Jernej Škrabec <jernej.skrabec@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
These callbacks can be called again by the cpufreq core after the driver
is initialized and must be kept around. We currently get section
mismatch build warnings.
Don't mark them with __init.
Fixes: dcfce7c2cee4 ("cpufreq: sparc: Don't allocate cpufreq_driver dynamically")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These add support for new hardware (ap807 and AM62A7), fix several
issues in cpufreq drivers and in the operating performance points
(OPP) framework, fix up intel_idle after recent changes and add
documentation.
Specifics:
- Add missing __init annotation to one function in the intel_idle
drvier (Rafael Wysocki)
- Make intel_pstate use a correct scaling factor when mapping HWP
performance levels to frequency values on hybrid-capable systems
with disabled E-cores (Srinivas Pandruvada)
- Fix Kconfig dependencies of the cpufreq-dt-platform driver (Viresh
Kumar)
- Add support to build cpufreq-dt-platdev as a module (Zhipeng Wang)
- Don't allocate Sparc's cpufreq_driver dynamically (Viresh Kumar)
- Add support for TI's AM62A7 platform (Vibhore Vardhan)
- Add support for Armada's ap807 platform (Russell King (Oracle))
- Add support for StarFive JH7110 SoC (Mason Huo)
- Fix voltage selection for Mediatek Socs (Daniel Golle)
- Fix error handling in Tegra's cpufreq driver (Christophe JAILLET)
- Document Qualcomm's IPQ8074 in DT bindings (Robert Marko)
- Don't warn for disabling a non-existing frequency for imx6q cpufreq
driver (Christoph Niedermaier)
- Use dev_err_probe() in Qualcomm's cpufreq driver (Andrew Halaney)
- Simplify performance state related logic in the OPP core (Viresh
Kumar)
- Fix use-after-free and improve locking around lazy_opp_tables
(Viresh Kumar, Stephan Gerhold)
- Minor cleanups - using dev_err_probe() and rate-limiting debug
messages (Andrew Halaney, Adrián Larumbe)"
* tag 'pm-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
cpufreq: intel_pstate: Fix scaling for hybrid-capable systems with disabled E-cores
cpufreq: Make CONFIG_CPUFREQ_DT_PLATDEV depend on OF
intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()
OPP: Properly propagate error along when failing to get icc_path
OPP: Use dev_err_probe() when failing to get icc_path
cpufreq: qcom-cpufreq-hw: Use dev_err_probe() when failing to get icc paths
cpufreq: mediatek: correct voltages for MT7622 and MT7623
cpufreq: armada-8k: add ap807 support
OPP: Simplify the over-designed pstate <-> level dance
OPP: pstate is only valid for genpd OPP tables
OPP: don't drop performance constraint on OPP table removal
OPP: Protect `lazy_opp_tables` list with `opp_table_lock`
OPP: Staticize `lazy_opp_tables` in of.c
cpufreq: dt-platdev: Support building as module
opp: Fix use-after-free in lazy_opp_tables after probe deferral
dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ8074
cpufreq: dt-platdev: Blacklist ti,am62a7 SoC
cpufreq: ti-cpufreq: Add support for AM62A7
OPP: rate-limit debug messages when no change in OPP is required
cpufreq: imx6q: don't warn for disabling a non-existing frequency
...
|
|
E-cores
Some system BIOS configuration may provide option to disable E-cores.
As part of this change, CPUID feature for hybrid (Leaf 7 sub leaf 0,
EDX[15] = 0) may not be set. But HWP performance limits will still be
using a scaling factor like any other hybrid enabled system.
The current check for applying scaling factor will fail when hybrid
CPUID feature is not set and the only way to make sure that scaling
should be applied by checking CPPC nominal frequency and nominal
performance.
First, or systems predating Alder Lake, the CPPC nominal frequency and
nominal performance are 0, which can be used to distinguish those
systems from hybrid systems with disabled E-cores.
Second, if the CPPC nominal frequency and nominal performance are
defined, which indicates the need to use a special scaling factor, and
the nominal performance value multiplied by 100 is not equal to the
nominal frequency one, use hybrid scaling factor.
This can be done for all HWP systems without additional CPU model check.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject and changelog edits, removal of unneeded parens, comment
edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The cpufreq-dt-platform.c driver requires CONFIG_OF to be selected. Mark
it as a dependency.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306250025.savpMM8L-lkp@intel.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for 6.5 from Viresh Kumar:
"- Add support to build cpufreq-dt-platdev as module (Zhipeng Wang).
- Don't allocate Sparc's cpufreq_driver dynamically (Viresh Kumar).
- Add support for TI's AM62A7 platform (Vibhore Vardhan).
- Add support for Armada's ap807 platform (Russell King (Oracle)).
- Add support for StarFive JH7110 SoC (Mason Huo).
- Fix voltage selection for Mediatek Socs (Daniel Golle).
- Fix error handling in Tegra's cpufreq driver (Christophe JAILLET).
- Document Qualcomm's IPQ8074 in DT bindings (Robert Marko).
- Don't warn for disabling a non-existing frequency for imx6q cpufreq
driver (Christoph Niedermaier).
- Use dev_err_probe() in Qualcomm's cpufreq driver (Andrew Halaney)."
|
|
This way, if there's an issue (in this case a -EPROBE_DEFER), you can
get useful output:
[root@dhcp19-243-150 ~]# cat /sys/kernel/debug/devices_deferred
18591000.cpufreq qcom-cpufreq-hw: Failed to find icc paths
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.5
Konrad Dybcio is promoted, from reviewer, to co-maintainer.
The mdt_loader gets a fix to the detection of split binaries, where the
previous logic sometimes concluded that the first segments was not
split, in a split image. The unconditional calling of
scm_pas_mem_setup() turns out to cause a regression and is reverted.
The altmode subfunction of pmic_glink is enabled for SM8450.
A new driver for exposing power statistics from the RPM, for debugging
purposes, is introduced.
OCMEM gets a debug prints of the hardware version, QMI helpers are
transitioned to alloc_ordered_workqueue() and an error message in
ramp_controller is improved.
An API is introduced to the SMEM driver to allow other drivers to query
the SoC id, rather than open-coding the parsing of the relevant SMEM
item. This is then used to clean up the Qualcomm NVMEM-based cpufreq
driver.
Socinfo is extended with knowledge about IPQ5018, IPQ5312 and IPQ5302.
* tag 'qcom-drivers-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
soc: qcom: ocmem: Add OCMEM hardware version print
cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
cpufreq: qcom-nvmem: use SoC ID-s from bindings
soc: qcom: smem: introduce qcom_smem_get_soc_id()
soc: qcom: smem: Switch to EXPORT_SYMBOL_GPL()
soc: qcom: socinfo: move SMEM item struct and defines to a header
soc: qcom: mdt_loader: Fix unconditional call to scm_pas_mem_setup
MAINTAINERS: Add Konrad Dybcio as linux-arm-msm co-maintainer
dt-bindings: sram: qcom,imem: Document MSM8226
soc: qcom: socinfo: Add Soc ID for IPQ5312 and IPQ5302
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5312 and IPQ5302
soc: qcom: socinfo: Add IDs for IPQ5018 family
dt-bindings: arm: qcom,ids: Add IDs for IPQ5018 family
soc: qcom: Introduce RPM master stats driver
dt-bindings: soc: qcom: Add RPM Master stats
soc: qcom: qmi: Use alloc_ordered_workqueue() to create ordered workqueues
soc: qcom: ramp_controller: Improve error message for failure in .remove()
dt-bindings: soc: qcom: smd-rpm: allow MSM8226 over SMD
soc: qcom: rpmpd: use correct __le32 type
dt-bindings: soc: qcom: eud: Fix compatible string in the example
...
Link: https://lore.kernel.org/r/20230611010044.2481875-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If the intel_pstate driver is set to passive mode, then writing the
same value to the energy_performance_preference sysfs twice will fail.
This is caused by the wrong return value used (index of the matched
energy_perf_string), instead of the length of the passed in parameter.
Fix by forcing the internal return value to zero when the same
preference is passed in by user. This same issue is not present when
active mode is used for the driver.
Fixes: f6ebbcf08f37 ("cpufreq: intel_pstate: Implement passive mode with HWP enabled")
Reported-by: Niklas Neronin <niklas.neronin@intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Users are having more success with amd-pstate since the introduction
of EPP and Guided modes. To expose the driver to more users by default
introduce a kernel configuration option for setting the default mode.
Users can use an integer to map out which default mode they want to use
in lieu of a kernel command line option.
This will default to EPP, but only if:
1) The CPU supports an MSR.
2) The system profile is identified
3) The system profile is identified as a non-server by the FADT.
Link: https://gitlab.freedesktop.org/hadess/power-profiles-daemon/-/merge_requests/121
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Co-developed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If a user's configuration doesn't explicitly specify the cpufreq
scaling governor then the code currently explicitly falls back to
'powersave'. This default is fine for notebooks and desktops, but
servers and undefined machines should default to 'performance'.
Look at the 'preferred_profile' field from the FADT to set this
policy accordingly.
Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/05_ACPI_Software_Programming_Model/ACPI_Software_Programming_Model.html#fixed-acpi-description-table-fadt
Acked-by: Huang Rui <ray.huang@amd.com>
Suggested-by: Wyes Karny <Wyes.Karny@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Kconfig currently defaults the governor to schedutil on x86_64
only when intel-pstate and SMP have been selected.
If the kernel is built only with amd-pstate, the default governor
should also be schedutil.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The MT6380 regulator typically used together with MT7622 does not
support the current maximum processor and SRAM voltage in the cpufreq
driver (1360000uV).
For MT7622 limit processor and SRAM supply voltages to 1350000uV to
avoid having the tracking algorithm request unsupported voltages from
the regulator.
On MT7623 there is no separate SRAM supply and the maximum voltage used
is 1300000uV. Create dedicated platform data for MT7623 to cover that
case as well.
Fixes: 0883426fd07e3 ("cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623")
Suggested-by: Jia-wei Chang <Jia-wei.Chang@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add support for the Armada AP807 die to armada-8k. This uses a
different compatible for the CPU clock which needs to be added to
the cpufreq driver.
This commit takes a different approach to the WindRiver patch
"cpufreq: armada: enable ap807-cpu-clk" in that rather than calling
of_find_compatible_node() for each compatible, we use a table of
IDs instead.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
amd-pstate passive mode driver is hyphenated. So make amd-pstate active
mode driver consistent with that rename "amd_pstate_epp" to
"amd-pstate-epp".
Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently amd_pstate sets CPPC enable bit in MSR_AMD_CPPC_ENABLE only
for the CPU where the module_init happened. But MSR_AMD_CPPC_ENABLE is
per-socket. This causes CPPC enable bit to set for only one socket for
servers with more than one physical packages. To fix this write
MSR_AMD_CPPC_ENABLE per-socket.
Also, handle duplicate calls for cppc_enable, because it's called from
per-policy/per-core callbacks and can result in duplicate MSR writes.
Before the fix:
amd@amd:~$ sudo rdmsr -a 0xc00102b1 | uniq --count
192 0
192 1
After the fix:
amd@amd:~$ sudo rdmsr -a 0xc00102b1 | uniq --count
384 1
Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If fast_switch_possible flag is set by the scaling driver, the governor
is free to select fast_switch function even if adjust_perf is set. Some
scaling drivers which use adjust_perf don't set fast_switch thinking
that the governor would never fall back to fast_switch. But the governor
can fall back to fast_switch even in runtime if frequency invariance is
disabled due to some reason. This could crash the kernel if the driver
didn't set the fast_switch function pointer.
Therefore, fail driver registration if it has adjust_perf without
fast_switch.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Make the cpufreq platdev driver as tristate so that it can be built
as loadable module.
Also add MODULE_LICENSE to support building as module.
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
[ Viresh: Merged two commits, included module.h ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add ti,am62a7 SoC to the blacklist as the ti-cpufreq driver will handle
creating the cpufreq-dt platform device after it completes so it is not
created twice.
Based on AM625 CPUFreq patch series by Dave Gerlach.
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add support for TI K3 AM62A7 SoC to read speed and revision values from
hardware and pass to OPP layer. AM62A7 has the same A53 and efuse
configuration as AM625. Thus, soc_data from AM625 is reused.
Based on AM625 CPUFreq patch series by Dave Gerlach.
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Now that SMEM exports a helper to get the SMEM SoC ID lets utilize it.
Currently qcom_cpufreq_get_msm_id() is encoding the returned SMEM SoC ID
into an enum, however there is no reason to do so and we can just match
directly on the SMEM SoC ID as returned by qcom_smem_get_soc_id().
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526204802.3081168-5-robimarko@gmail.com
|
|
SMEM SoC ID-s are now stored in DT bindings so lets use those instead of
defining them in the driver again.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526204802.3081168-4-robimarko@gmail.com
|
|
Driver should update policy->cur after updating the frequency.
Currently amd_pstate doesn't update policy->cur when `adjust_perf`
is used. Which causes /proc/cpuinfo to show wrong cpu frequency.
Fix this by updating policy->cur with correct frequency value in
adjust_perf function callback.
- Before the fix: (setting min freq to 1.5 MHz)
[root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count
1 cpu MHz : 1777.016
1 cpu MHz : 1797.160
1 cpu MHz : 1797.270
189 cpu MHz : 400.000
- After the fix: (setting min freq to 1.5 MHz)
[root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count
1 cpu MHz : 1753.353
1 cpu MHz : 1756.838
1 cpu MHz : 1776.466
1 cpu MHz : 1776.873
1 cpu MHz : 1777.308
1 cpu MHz : 1779.900
183 cpu MHz : 1805.231
1 cpu MHz : 1956.815
1 cpu MHz : 2246.203
1 cpu MHz : 2259.984
Fixes: 1d215f0319c2 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
[ rjw: Subject edits ]
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
amd_pstate active mode driver is only compatible with static governors.
Therefore it doesn't need fast_switch functionality. Remove
fast_switch_possible flag from amd_pstate active mode driver.
Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
