summaryrefslogtreecommitdiff
path: root/drivers/cpufreq
AgeCommit message (Collapse)AuthorFilesLines
2023-11-02Merge tag 'asm-generic-6.7' of ↵Linus Torvalds3-365/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull ia64 removal and asm-generic updates from Arnd Bergmann: - The ia64 architecture gets its well-earned retirement as planned, now that there is one last (mostly) working release that will be maintained as an LTS kernel. - The architecture specific system call tables are updated for the added map_shadow_stack() syscall and to remove references to the long-gone sys_lookup_dcookie() syscall. * tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: hexagon: Remove unusable symbols from the ptrace.h uapi asm-generic: Fix spelling of architecture arch: Reserve map_shadow_stack() syscall number for all architectures syscalls: Cleanup references to sys_lookup_dcookie() Documentation: Drop or replace remaining mentions of IA64 lib/raid6: Drop IA64 support Documentation: Drop IA64 from feature descriptions kernel: Drop IA64 support from sig_fault handlers arch: Remove Itanium (IA-64) architecture
2023-11-02Merge tag 'soc-drivers-6.7' of ↵Linus Torvalds1-14/+38
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "The highlights for the driver support this time are - Qualcomm platforms gain support for the Qualcomm Secure Execution Environment firmware interface to access EFI variables on certain devices, and new features for multiple platform and firmware drivers. - Arm FF-A firmware support gains support for v1.1 specification features, in particular notification and memory transaction descriptor changes. - SCMI firmware support now support v3.2 features for clock and DVFS configuration and a new transport for Qualcomm platforms. - Minor cleanups and bugfixes are added to pretty much all the active platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive, amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and more. In particular, this contains portions of the treewide conversion to use __counted_by annotations and the device_get_match_data helper" * tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits) soc: qcom: pmic_glink_altmode: Print return value on error firmware: qcom: scm: remove unneeded 'extern' specifiers firmware: qcom: scm: add a missing forward declaration for struct device firmware: qcom: move Qualcomm code into its own directory soc: samsung: exynos-chipid: Convert to platform remove callback returning void soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size() soc: qcom: pmic_glink: fix connector type to be DisplayPort soc: ti: k3-socinfo: Avoid overriding return value soc: ti: k3-socinfo: Fix typo in bitfield documentation soc: ti: knav_qmss_queue: Use device_get_match_data() firmware: ti_sci: Use device_get_match_data() firmware: qcom: qseecom: add missing include guards soc/pxa: ssp: Convert to platform remove callback returning void soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void soc/mediatek: mtk-devapc: Convert to platform remove callback returning void soc/loongson: loongson2_guts: Convert to platform remove callback returning void soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void ...
2023-11-01Merge tag 'pm-6.7-rc1' of ↵Linus Torvalds11-137/+344
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add new hardware support (new Qualcomm SoC versions in cpufreq, RK3568/RK3588 in devfreq), extend the OPP (operating performance points) framework, improve cpufreq governors, fix issues and clean up code (most of the changes are in cpufreq and devfreq). Specifics: - Add support for several Qualcomm SoC versions and other similar changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan Gerhold and Varadarajan Narayanan) - Clean up the tegra cpufreq driver (Sumit Gupta) - Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob Herring) - Add support for TI's am62p5 Soc (Bryan Brattlof) - Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian Fainelli) - Update Kconfig to mention i.MX7 as well (Alexander Stein) - Revise global turbo disable check in intel_pstate (Srinivas Pandruvada) - Carry out initialization of sg_cpu in the schedutil cpufreq governor in one loop (Liao Chang) - Simplify the condition for storing 'down_threshold' in the conservative cpufreq governor (Liao Chang) - Use fine-grained mutex in the userspace cpufreq governor (Liao Chang) - Move is_managed indicator in the userspace cpufreq governor into a per-policy structure (Liao Chang) - Rebuild sched-domains when removing cpufreq driver (Pierre Gondois) - Fix buffer overflow detection in trans_stats() (Christian Marangi) - Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs to support specific devices like UFS which handle multiple clocks through OPP (Operating Performance Point) framework (Manivannan Sadhasivam) - Add perf support to the Rockchip DFI (DDR Monitor Module) devfreq- event driver: * Generalize rockchip-dfi.c to support new RK3568/RK3588 using different DDR type (Sascha Hauer). * Convert DT binding document format to yaml (Sascha Hauer). * Add perf support for DFI (a unit suitable for measuring DDR utilization) to rockchip-dfi.c to extend DFI usage (Sascha Hauer) - Add locking to the OPP handling code in the Mediatek CCI devfreq driver, because the voltage of shared OPP might be changed by multiple drivers (Mark Tseng, Dan Carpenter) - Use device_get_match_data() in the Samsung Exynos PPMU devfreq-event driver (Rob Herring) - Extend support for the opp-level beyond required-opps (Ulf Hansson) - Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru) - dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm Krait SoCs and document named opp-microvolt property (Bjorn Andersson, Dmitry Baryshkov and Christian Marangi) - Fix -Wunsequenced warning _of_add_opp_table_v1() (Nathan Chancellor) - General cleanup of OPP code (Viresh Kumar) - Use __get_safe_page() rather than touching the list in hibernation snapshot code (Brian Geffon) - Fix symbol export for _SIMPLE_ variants of _PM_OPS() (Raag Jadav) - Clean up sync_read handling in snapshot_write_next() (Brian Geffon) - Fix kerneldoc comments for swsusp_check() and swsusp_close() to better match code (Christoph Hellwig) - Downgrade BIOS locked limits pr_warn() in the Intel RAPL power capping driver to pr_debug() (Ville Syrjälä) - Change the minimum python version for the intel_pstate_tracer utility from 2.7 to 3.6 (Doug Smythies)" * tag 'pm-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (82 commits) dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT cpufreq: qcom-nvmem: add support for IPQ8064 cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu cpufreq: qcom-nvmem: drop pvs_ver for format a fuses dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu cpufreq: qcom-nvmem: add support for IPQ6018 dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018 cpufreq: qcom-nvmem: Add MSM8909 cpufreq: qcom-nvmem: Simplify driver data allocation powercap: intel_rapl: Downgrade BIOS locked limits pr_warn() to pr_debug() cpufreq: stats: Fix buffer overflow detection in trans_stats() dt-bindings: devfreq: event: rockchip,dfi: Add rk3588 support dt-bindings: devfreq: event: rockchip,dfi: Add rk3568 support dt-bindings: devfreq: event: convert Rockchip DFI binding to yaml PM / devfreq: rockchip-dfi: add support for RK3588 PM / devfreq: rockchip-dfi: account for multiple DDRMON_CTRL registers PM / devfreq: rockchip-dfi: make register stride SoC specific PM / devfreq: rockchip-dfi: Add perf support PM / devfreq: rockchip-dfi: give variable a better name ...
2023-10-25Merge tag 'cpufreq-arm-updates-6.7' of ↵Rafael J. Wysocki6-88/+291
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Merge ARM cpufreq updates for 6.7 from Viresh Kumar: "- Add support for several Qualcomm SoC versions and other similar changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan Gerhold and Varadarajan Narayanan). - Cleanups to the tegra cpufreq driver (Sumit Gupta). - Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob Herring). - Add support for TI's am62p5 Soc (Bryan Brattlof). - Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian Fainelli). - Update Kconfig to mention i.MX7 as well (Alexander Stein)." * tag 'cpufreq-arm-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (25 commits) dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT cpufreq: qcom-nvmem: add support for IPQ8064 cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu cpufreq: qcom-nvmem: drop pvs_ver for format a fuses dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu cpufreq: qcom-nvmem: add support for IPQ6018 dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018 cpufreq: qcom-nvmem: Add MSM8909 cpufreq: qcom-nvmem: Simplify driver data allocation dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible cpufreq: ARM_BRCMSTB_AVS_CPUFREQ cannot be used with ARM_SCMI_CPUFREQ cpufreq: ti-cpufreq: Add opp support for am62p5 SoCs cpufreq: dt-platdev: add am62p5 to blocklist cpufreq: tegra194: remove redundant AND with cpu_online_mask cpufreq: tegra194: use refclk delta based loop instead of udelay cpufreq: tegra194: save CPU data to avoid repeated SMP calls dt-bindings: cpufreq: cpufreq-qcom-hw: add SDM670 compatible dt-bindings: cpufreq: qcom-nvmem: Document MSM8909 cpufreq: dt: platdev: Add MSM8909 to blocklist ...
2023-10-25cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DTAlexander Stein1-2/+2
Since commit a5a9dffcc903 ("ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading") i.MX7 uses this driver as well. Add it to the description text. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-25cpufreq: qcom-nvmem: add support for IPQ8064Christian Marangi1-1/+66
IPQ8064 comes in 3 families: * IPQ8062 up to 1.0GHz * IPQ8064/IPQ8066/IPQ8068 up to 1.4GHz * IPQ8065/IPQ8069 up to 1.7Ghz So, in order to be able to support one OPP table, add support for IPQ8064 family based of SMEM SoC ID-s and correctly set the version so opp-supported-hw can be correctly used. Bit are set with the following logic: * IPQ8062 BIT 0 * IPQ8064/IPQ8066/IPQ8068 BIT 1 * IPQ8065/IPQ8069 BIT 2 speed is never fused, only pvs values are fused. IPQ806x SoC doesn't have pvs_version so we drop and we use the new pattern: opp-microvolt-speed0-pvs<PSV_VALUE> Example: - for ipq8062 psv2 opp-microvolt-speed0-pvs2 = < 925000 878750 971250> Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> [ Viresh: Fixed rebase conflict. ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-25cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpuDmitry Baryshkov1-1/+2
the qcom-cpufreq-nvmem driver attempts to support both Qualcomm Kryo (newer 64-bit ARMv8 cores) and Krait (older 32-bit ARMv7 cores). It makes no sense to use 'operating-points-v2-kryo-cpu' compatibility node for the Krait cores. Add support for 'operating-points-v2-krait-cpu' compatibility string. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-25cpufreq: qcom-nvmem: drop pvs_ver for format a fusesDmitry Baryshkov1-3/+2
The fuses used on msm8960 / apq8064 / ipq806x families of devices do not have the pvs version. Drop this argument from parsing function. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-25cpufreq: qcom-nvmem: add support for IPQ6018Robert Marko2-0/+59
IPQ6018 SoC series comes in multiple SKU-s, and not all of them support high frequency OPP points. SoC itself does however have a single bit in QFPROM to indicate the CPU speed-bin. That bit is used to indicate frequency limit of 1.5GHz, but that alone is not enough as IPQ6000 only goes up to 1.2GHz, but SMEM ID can be used to limit it further. IPQ6018 compatible is blacklisted from DT platdev as the cpufreq device will get created by NVMEM CPUFreq driver. Signed-off-by: Robert Marko <robimarko@gmail.com> [ Viresh: Fixed rebase conflict. ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-25cpufreq: qcom-nvmem: Add MSM8909Stephan Gerhold1-0/+26
When the MSM8909 SoC is used together with the PM8909 PMIC the primary power supply for the CPU (VDD_APC) is shared with other components to the SoC, namely the VDD_CX power domain typically supplied by the PM8909 S1 regulator. This means that all votes for necessary performance states go via the RPM firmware which collects the requirements from all the processors in the SoC. The RPM firmware then chooses the actual voltage based on the performance states ("corners"), depending on calibration values in the NVMEM and other factors. The MSM8909 SoC is also sometimes used with the PM8916 or PM660 PMIC. In that case there is a dedicated regulator connected to VDD_APC and Linux is responsible to do adaptive voltage scaling using CPR (similar to the existing code for QCS404). This difference can be described in the device tree, by either assigning the CPU a power domain from RPMPD or from the CPR driver. Describe this using "perf" as generic power domain name, which is also used already for SCMI based platforms. Also add a simple function that reads the speedbin from a NVMEM cell and sets it as-is for opp-supported-hw. The actual bit position can be described in the device tree without additional driver changes. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> [ Viresh: Fixed rebase conflict. ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-25cpufreq: qcom-nvmem: Simplify driver data allocationStephan Gerhold1-31/+18
Simplify the allocation and cleanup of driver data by using devm together with a flexible array. Prepare for adding additional per-CPU data by defining a struct qcom_cpufreq_drv_cpu instead of storing the opp_tokens directly. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-24cpufreq: stats: Fix buffer overflow detection in trans_stats()Christian Marangi1-7/+7
Commit 3c0897c180c6 ("cpufreq: Use scnprintf() for avoiding potential buffer overflow") switched from snprintf to the more secure scnprintf but never updated the exit condition for PAGE_SIZE. As the commit say and as scnprintf document, what scnprintf returns what is actually written not counting the '\0' end char. This results in the case of len exceeding the size, len set to PAGE_SIZE - 1, as it can be written at max PAGE_SIZE - 1 (as '\0' is not counted) Because of len is never set to PAGE_SIZE, the function never break early, never prints the warning and never return -EFBIG. Fix this by changing the condition to PAGE_SIZE - 1 to correctly trigger the error. Cc: 5.10+ <stable@vger.kernel.org> # 5.10+ Fixes: 3c0897c180c6 ("cpufreq: Use scnprintf() for avoiding potential buffer overflow") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-10-12cpufreq: ARM_BRCMSTB_AVS_CPUFREQ cannot be used with ARM_SCMI_CPUFREQFlorian Fainelli1-1/+1
The brcmstb-avs-cpufreq driver is considered a legacy driver and since 2018, ARCH_BRCMSTB systems have been using scmi-cpufreq. As a matter of fact, when SCMI is in use, brcmstb-avs-cpufreq is unusable since the SCMI firmware takes over, this can result in various problems, including external synchronous aborts. Express those constraints such that the driver is not enabled by default when SCMI CPU frequency scaling is in use. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-12cpufreq: ti-cpufreq: Add opp support for am62p5 SoCsBryan Brattlof1-0/+1
The am62p5 is a variation of the am625 and the am62a7 SoC families. Add the am62p5 to the list using the same cpufreq data as the rest of the am62x extended family. Signed-off-by: Bryan Brattlof <bb@ti.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-12cpufreq: dt-platdev: add am62p5 to blocklistBryan Brattlof1-0/+1
The am62p5 family of SoCs is a variation of the am625 and am62a7 SoC family. Add this device along with the devices which will use the operating-points-v2 property. Signed-off-by: Bryan Brattlof <bb@ti.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-10cpufreq: tegra194: remove redundant AND with cpu_online_maskSumit Gupta1-1/+1
Remove redundant 'AND' with cpu_online_mask as the policy->cpus always contains only the currently online CPUs. Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/lkml/20231003050019.a6mcchw2o2z2wkrh@vireshk-i7/ Signed-off-by: Sumit Gupta <sumitg@nvidia.com> [ Viresh: Fix rebase conflict ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-10cpufreq: tegra194: use refclk delta based loop instead of udelaySumit Gupta1-17/+55
Use reference clock count based loop instead of "udelay()" for sampling of counters to improve the accuracy of re-generated CPU frequency. "udelay()" internally calls "WFE" which stops the counters and results in bigger delta between the last set freq and the re-generated value from counters. The counter sampling window used in loop is the minimum number of reference clock cycles which is known to give a stable value of CPU frequency. The change also helps to reduce the sampling window from "500us" to "<50us". Suggested-by: Antti Miettinen <amiettinen@nvidia.com> Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-10cpufreq: tegra194: save CPU data to avoid repeated SMP callsSumit Gupta1-28/+51
Currently, we make SMP call on every frequency set request to get the physical 'CPU ID' and 'CLUSTER ID' for the target CPU. This change optimizes the repeated calls by storing the physical IDs and the per core frequency register offset for all CPUs during boot. Later this info is used directly when required to set the frequency or read it from ACTMON counters. Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-06cpufreq: Rebuild sched-domains when removing cpufreq driverPierre Gondois1-2/+1
The Energy Aware Scheduler (EAS) relies on the schedutil governor. When moving to/from the schedutil governor, sched domains must be rebuilt to allow re-evaluating the enablement conditions of EAS. This is done through sched_cpufreq_governor_change(). Having a cpufreq governor assumes a cpufreq driver is running. Inserting/removing a cpufreq driver should trigger a re-evaluation of EAS enablement conditions, avoiding to see EAS enabled when removing a running cpufreq driver. Rebuild the sched domains in schedutil's sugov_init()/sugov_exit(), allowing to check EAS's enablement condition whenever schedutil governor is initialized/exited from. Move relevant code up in schedutil.c to avoid a split and conditional function declaration. Rename sched_cpufreq_governor_change() to sugov_eas_rebuild_sd(). Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-10-06cpufreq: userspace: Move is_managed indicator into per-policy structureLiao Chang1-5/+4
The userspace governor uses the 'cpu' field of cpufreq_policy structure to track if it is allowed to set the speed of the policy. However, there is a window where the 'cpu' field is equal to the value of nr_cpus_id when all affected CPUs of policy are offline, which is an illegal value to get the per-CPU variable. To avoid this issue, modify the governor to use a per-policy indicator to track if the policy is managed. Signed-off-by: Liao Chang <liaochang1@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-10-06cpufreq: userspace: Use fine-grained mutex in userspace governorLiao Chang1-29/+40
The userspace governor currently uses a big global mutex to avoid the race condition on the governor_data field of cpufreq_policy structure. This leads to a low concurrency if multiple userspace applications are trying to set the speed of different policies at the same time. Introduce a per-policy mutex to allow the updating of different policies to be performed concurrently, improving overall concurrency. Signed-off-by: Liao Chang <liaochang1@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-10-06cpufreq: conservative: Simplify the condition of storing 'down_threshold'Liao Chang1-2/+1
The governor currently checks if the input new down_threshold is less than 100 before storing it, but the up_threshold field of dbs_data structure is also limited to be less than 100, so this check is unnecessary and remove it. Signed-off-by: Liao Chang <liaochang1@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-09-30cpufreq: Replace deprecated strncpy() with strscpy()Justin Stitt1-2/+2
`strncpy` is deprecated for use on NUL-terminated destination strings [1]. We should prefer more robust and less ambiguous string interfaces. Both `policy->last_governor` and `default_governor` are expected to be NUL-terminated which is shown by their heavy usage with other string apis like `strcmp`. A suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20230913-strncpy-drivers-cpufreq-cpufreq-c-v1-1-f1608bfeff63@google.com Signed-off-by: Kees Cook <keescook@chromium.org>
2023-09-28cpufreq: dt: platdev: Add MSM8909 to blocklistStephan Gerhold1-0/+1
MSM8909 uses qcom-cpufreq-nvmem to attach power domains and to parse the speedbin from NVMEM (for opp-supported-hw). Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> [ Viresh: Fixed order in table ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-09-27cpufreq: pmac32: Use of_property_read_reg() to parse "reg"Rob Herring1-4/+3
Use the recently added of_property_read_reg() helper to get the untranslated "reg" address value. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-09-27cpufreq: Add QCM6490 to cpufreq-dt-platdev blocklistLuca Weiss1-0/+1
The Qualcomm QCM6490 platform uses the qcom-cpufreq-hw driver, so add it to the cpufreq-dt-platdev driver's blocklist. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-09-27cpufreq: tegra194: fix warning due to missing opp_putSumit Gupta1-0/+2
Fix the warning due to missing dev_pm_opp_put() call and hence wrong refcount value. This causes below warning message when trying to remove the module. Call trace: dev_pm_opp_put_opp_table+0x154/0x15c dev_pm_opp_remove_table+0x34/0xa0 _dev_pm_opp_cpumask_remove_table+0x7c/0xbc dev_pm_opp_of_cpumask_remove_table+0x10/0x18 tegra194_cpufreq_exit+0x24/0x34 [tegra194_cpufreq] cpufreq_remove_dev+0xa8/0xf8 subsys_interface_unregister+0x90/0xe8 cpufreq_unregister_driver+0x54/0x9c tegra194_cpufreq_remove+0x18/0x2c [tegra194_cpufreq] platform_remove+0x24/0x74 device_remove+0x48/0x78 device_release_driver_internal+0xc8/0x160 driver_detach+0x4c/0x90 bus_remove_driver+0x68/0xb8 driver_unregister+0x2c/0x58 platform_driver_unregister+0x10/0x18 tegra194_ccplex_driver_exit+0x14/0x1e0 [tegra194_cpufreq] __arm64_sys_delete_module+0x184/0x270 Fixes: f41e1442ac5b ("cpufreq: tegra194: add OPP support and set bandwidth") Signed-off-by: Sumit Gupta <sumitg@nvidia.com> [ Viresh: Add a blank line ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-09-21cpufreq: scmi: Add support to parse domain-id using #power-domain-cellsUlf Hansson1-6/+18
The performance domain-id can be described in DT using the power-domains property or the clock property. The latter is already supported, so let's add support for the power-domains too. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20230825112633.236607-12-ulf.hansson@linaro.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-09-21cpufreq: scmi: Avoid one OF parsing in scmi_get_sharing_cpus()Ulf Hansson1-7/+4
The domain-id for the cpu_dev has already been parsed at the point when scmi_get_sharing_cpus() is getting called. Let's pass it as an in-parameter to avoid the unnecessary OF parsing. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20230825112633.236607-7-ulf.hansson@linaro.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-09-21firmware: arm_scmi: Align perf ops to use domain-id as in-parameterUlf Hansson1-5/+9
Most scmi_perf_proto_ops are already using an "u32 domain" as an in-parameter to indicate what performance domain we shall operate upon. However, some of the ops are using a "struct device *dev", which means that an additional OF parsing is needed each time the perf ops gets called, to find the corresponding domain-id. To avoid the above, but also to make the code more consistent, let's replace the in-parameter "struct device *dev" with an "u32 domain". Note that, this requires us to make some corresponding changes to the scmi cpufreq driver, so let's do that too. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20230825112633.236607-5-ulf.hansson@linaro.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-09-21cpufreq: scmi: Prepare to move OF parsing of domain-id to cpufreqUlf Hansson1-4/+15
The OF parsing of the clock domain specifier seems to better belong in the scmi cpufreq driver, rather than being implemented behind the generic ->device_domain_id() perf protocol ops. To prepare to remove the ->device_domain_id() ops, let's implement the OF parsing in the scmi cpufreq driver instead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20230825112633.236607-4-ulf.hansson@linaro.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-09-11cpufreq: intel_pstate: Revise global turbo disable checkSrinivas Pandruvada1-5/+1
Setting global turbo flag based on CPU 0 P-state limits is problematic as it limits max P-state request on every CPU on the system just based on its P-state limits. There are two cases in which global.turbo_disabled flag is set: - When the MSR_IA32_MISC_ENABLE_TURBO_DISABLE bit is set to 1 in the MSR MSR_IA32_MISC_ENABLE. This bit can be only changed by the system BIOS before power up. - When the max non turbo P-state is same as max turbo P-state for CPU 0. The second check is not a valid to decide global turbo state based on the CPU 0. CPU 0 max turbo P-state can be same as max non turbo P-state, but for other CPUs this may not be true. There is no guarantee that max P-state limits are same for every CPU. This is possible that during fusing max P-state for a CPU is constrained. Also with the Intel Speed Select performance profile, CPU 0 may not be present in all profiles. In this case the max non turbo and turbo P-state can be set to the lowest possible P-state by the hardware when switched to such profile. Since max non turbo and turbo P-state is same, global.turbo_disabled flag will be set. Once global.turbo_disabled is set, any scaling max and min frequency update for any CPU will result in its max P-state constrained to the max non turbo P-state. Hence remove the check of max non turbo P-state equal to max turbo P-state of CPU 0 to set global turbo disabled flag. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-09-11arch: Remove Itanium (IA-64) architectureArd Biesheuvel3-365/+0
The Itanium architecture is obsolete, and an informal survey [0] reveals that any residual use of Itanium hardware in production is mostly HP-UX or OpenVMS based. The use of Linux on Itanium appears to be limited to enthusiasts that occasionally boot a fresh Linux kernel to see whether things are still working as intended, and perhaps to churn out some distro packages that are rarely used in practice. None of the original companies behind Itanium still produce or support any hardware or software for the architecture, and it is listed as 'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers that contributed on behalf of those companies (nor anyone else, for that matter) have been willing to support or maintain the architecture upstream or even be responsible for applying the odd fix. The Intel firmware team removed all IA-64 support from the Tianocore/EDK2 reference implementation of EFI in 2018. (Itanium is the original architecture for which EFI was developed, and the way Linux supports it deviates significantly from other architectures.) Some distros, such as Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have dropped support years ago. While the argument is being made [1] that there is a 'for the common good' angle to being able to build and run existing projects such as the Grid Community Toolkit [2] on Itanium for interoperability testing, the fact remains that none of those projects are known to be deployed on Linux/ia64, and very few people actually have access to such a system in the first place. Even if there were ways imaginable in which Linux/ia64 could be put to good use today, what matters is whether anyone is actually doing that, and this does not appear to be the case. There are no emulators widely available, and so boot testing Itanium is generally infeasible for ordinary contributors. GCC still supports IA-64 but its compile farm [3] no longer has any IA-64 machines. GLIBC would like to get rid of IA-64 [4] too because it would permit some overdue code cleanups. In summary, the benefits to the ecosystem of having IA-64 be part of it are mostly theoretical, whereas the maintenance overhead of keeping it supported is real. So let's rip off the band aid, and remove the IA-64 arch code entirely. This follows the timeline proposed by the Debian/ia64 maintainer [5], which removes support in a controlled manner, leaving IA-64 in a known good state in the most recent LTS release. Other projects will follow once the kernel support is removed. [0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/ [1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/ [2] https://gridcf.org/gct-docs/latest/index.html [3] https://cfarm.tetaneutral.net/machines/list/ [4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/ [5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/ Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-08-29cpufreq: Support per-policy performance boostJie Zhan1-0/+43
The boost control currently applies to the whole system. However, users may prefer to boost a subset of cores in order to provide prioritized performance to workloads running on the boosted cores. Enable per-policy boost by adding a 'boost' sysfs interface under each policy path. This can be found at: /sys/devices/system/cpu/cpufreq/policy<*>/boost Same to the global boost switch, writing 1/0 to the per-policy 'boost' enables/disables boost on a cpufreq policy respectively. The user view of global and per-policy boost controls should be: 1. Enabling global boost initially enables boost on all policies, and per-policy boost can then be enabled or disabled individually, given that the platform does support so. 2. Disabling global boost makes the per-policy boost interface illegal. Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com> Reviewed-by: Wei Xu <xuwei5@hisilicon.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-08-29cpufreq: pcc: Fix the potentinal scheduling delays in target_index()Liao Chang1-1/+1
pcc_cpufreq_target(): cpufreq_freq_transition_begin(); spin_lock(&pcc_lock); [critical section] cpufreq_freq_transition_end(); spin_unlock(&pcc_lock); Above code has a performance issue, consider that Task0 executes 'cpufreq_freq_transition_end()' to wake Task1 and preempted imediatedly without releasing 'pcc_lock', then Task1 needs to wait for Task0 to release 'pcc_lock'. In the worst case, this locking order can result in Task1 wasting two scheduling rounds before it can enter the critical section. Signed-off-by: Liao Chang <liaochang1@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-08-29cpufreq: governor: Free dbs_data directly when gov->init() failsLiao Chang1-1/+3
Due to the kobject embedded in the dbs_data doest not has a release() method yet, it needs to use kfree() to free dbs_data directly when governor fails to allocate the tunner field of dbs_data. Signed-off-by: Liao Chang <liaochang1@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-08-29cpufreq: Fix the race condition while updating the transition_task of policyLiao Chang1-0/+2
The field 'transition_task' of policy structure is used to track the task which is performing the frequency transition. Using this field to print a warning once detect a case where the same task is calling _begin() again before completing the preivous frequency transition via the _end(). However, there is a potential race condition in _end() and _begin() APIs while updating the field 'transition_task' of policy, the scenario is depicted below: Task A Task B /* 1st freq transition */ Invoke _begin() { ... ... } /* 2nd freq transition */ Invoke _begin() { ... //waiting for A to ... //clear ... //transition_ongoing ... //in _end() for ... //the 1st transition | Change the frequency | | Invoke _end() { | ... | ... | transition_ongoing = false; V transition_ongoing = true; transition_task = current; transition_task = NULL; ... //A overwrites the task ... //performing the transition ... //result in error warning. } To fix this race condition, the transition_lock of policy structure is now acquired before updating policy structure in _end() API. Which ensure that only one task can update the 'transition_task' field at a time. Link: https://lore.kernel.org/all/b3c61d8a-d52d-3136-fbf0-d1de9f1ba411@huawei.com/ Fixes: ca654dc3a93d ("cpufreq: Catch double invocations of cpufreq_freq_transition_begin/end") Signed-off-by: Liao Chang <liaochang1@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-08-29cpufreq: Avoid printing kernel addresses in cpufreq_resume()Liao Chang1-4/+4
The pointer value of policy and driver structure are currently printed in the error messages of cpufreq_resume(), this is not recommended and helpful. In order to be consistent with the error message in cpufreq_suspend() and easier to understand, print the name of driver strcture and the manage CPU of policy structure individually in the error messages of cpufreq_resume(). Link: https://lore.kernel.org/all/b7be717c-41d8-bbbf-3e97-3799948ab757@huawei.com Signed-off-by: Liao Chang <liaochang1@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-08-28Merge tag 'cpufreq-arm-updates-6.6' of ↵Rafael J. Wysocki30-100/+103
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq updates for 6.6 from Viresh Kumar: "- Migrate various platforms to use remove callback returning void (Yangtao Li). - Add online/offline/exit hooks for Tegra driver (Sumit Gupta). - Explicitly include correct DT includes (Rob Herring). - Frequency domain updates for qcom-hw driver (Neil Armstrong). - Modify AMD pstate driver return the highest_perf value (Meng Li). - Generic cleanups for cppc, mediatek and powernow driver (Liao Chang and Konrad Dybcio). - Add more platforms to cpufreq-arm driver's blocklist (AngeloGioacchino Del Regno and Konrad Dybcio). - brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva)." * tag 'cpufreq-arm-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (33 commits) cpufreq: tegra194: remove opp table in exit hook cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit() cpufreq: tegra194: add online/offline hooks cpufreq: qcom-cpufreq-hw: add support for 4 freq domains dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fie cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases. cpufreq: Prefer to print cpuid in MIN/MAX QoS register error message cpufreq: amd-pstate-ut: Modify the function to get the highest_perf value cpufreq: mediatek-hw: Remove unused define cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev cpufreq: brcmstb-avs-cpufreq: Fix -Warray-bounds bug cpufreq: blocklist MSM8998 in cpufreq-dt-platdev cpufreq: omap: Convert to platform remove callback returning void cpufreq: qoriq: Convert to platform remove callback returning void cpufreq: acpi: Convert to platform remove callback returning void cpufreq: tegra186: Convert to platform remove callback returning void cpufreq: qcom-nvmem: Convert to platform remove callback returning void cpufreq: kirkwood: Convert to platform remove callback returning void cpufreq: pcc-cpufreq: Convert to platform remove callback returning void ...
2023-08-28cpufreq: tegra194: remove opp table in exit hookSumit Gupta1-0/+12
Add exit hook and remove OPP table when the device gets unregistered. This will fix the error messages when the CPU FREQ driver module is removed and then re-inserted. It also fixes these messages while onlining the first CPU from a policy whose all CPU's were previously offlined. debugfs: File 'cpu5' in directory 'opp' already present! debugfs: File 'cpu6' in directory 'opp' already present! debugfs: File 'cpu7' in directory 'opp' already present! Fixes: f41e1442ac5b ("cpufreq: tegra194: add OPP support and set bandwidth") Signed-off-by: Sumit Gupta <sumitg@nvidia.com> [ Viresh: Dropped irrelevant change from it ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-08-28cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()Liao Chang1-1/+2
Since the 'cpus' field of policy structure will become empty in the cpufreq core API, it is better to use 'related_cpus' in the exit() callback of driver. Fixes: c3274763bfc3 ("cpufreq: powernow-k8: Initialize per-cpu data-structures properly") Signed-off-by: Liao Chang <liaochang1@huawei.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-08-28cpufreq: tegra194: add online/offline hooksSumit Gupta1-0/+17
Implement the light-weight tear down and bring up helpers to reduce the amount of work to do on CPU offline/online operation. This change helps to make the hotplugging paths much faster. Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Link: https://lore.kernel.org/lkml/20230816033402.3abmugb5goypvllm@vireshk-i7/ [ Viresh: Fixed rebase conflict ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-08-23cpufreq: qcom-cpufreq-hw: add support for 4 freq domainsNeil Armstrong1-1/+1
Add support for up to 4 frequency domains as used on new platforms. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-08-22cpufreq: amd-pstate-ut: Fix kernel panic when loading the driverSwapnil Sapkal1-8/+16
After loading the amd-pstate-ut driver, amd_pstate_ut_check_perf() and amd_pstate_ut_check_freq() use cpufreq_cpu_get() to get the policy of the CPU and mark it as busy. In these functions, cpufreq_cpu_put() should be used to release the policy, but it is not, so any other entity trying to access the policy is blocked indefinitely. One such scenario is when amd_pstate mode is changed, leading to the following splat: [ 1332.103727] INFO: task bash:2929 blocked for more than 120 seconds. [ 1332.110001] Not tainted 6.5.0-rc2-amd-pstate-ut #5 [ 1332.115315] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1332.123140] task:bash state:D stack:0 pid:2929 ppid:2873 flags:0x00004006 [ 1332.123143] Call Trace: [ 1332.123145] <TASK> [ 1332.123148] __schedule+0x3c1/0x16a0 [ 1332.123154] ? _raw_read_lock_irqsave+0x2d/0x70 [ 1332.123157] schedule+0x6f/0x110 [ 1332.123160] schedule_timeout+0x14f/0x160 [ 1332.123162] ? preempt_count_add+0x86/0xd0 [ 1332.123165] __wait_for_common+0x92/0x190 [ 1332.123168] ? __pfx_schedule_timeout+0x10/0x10 [ 1332.123170] wait_for_completion+0x28/0x30 [ 1332.123173] cpufreq_policy_put_kobj+0x4d/0x90 [ 1332.123177] cpufreq_policy_free+0x157/0x1d0 [ 1332.123178] ? preempt_count_add+0x58/0xd0 [ 1332.123180] cpufreq_remove_dev+0xb6/0x100 [ 1332.123182] subsys_interface_unregister+0x114/0x120 [ 1332.123185] ? preempt_count_add+0x58/0xd0 [ 1332.123187] ? __pfx_amd_pstate_change_driver_mode+0x10/0x10 [ 1332.123190] cpufreq_unregister_driver+0x3b/0xd0 [ 1332.123192] amd_pstate_change_driver_mode+0x1e/0x50 [ 1332.123194] store_status+0xe9/0x180 [ 1332.123197] dev_attr_store+0x1b/0x30 [ 1332.123199] sysfs_kf_write+0x42/0x50 [ 1332.123202] kernfs_fop_write_iter+0x143/0x1d0 [ 1332.123204] vfs_write+0x2df/0x400 [ 1332.123208] ksys_write+0x6b/0xf0 [ 1332.123210] __x64_sys_write+0x1d/0x30 [ 1332.123213] do_syscall_64+0x60/0x90 [ 1332.123216] ? fpregs_assert_state_consistent+0x2e/0x50 [ 1332.123219] ? exit_to_user_mode_prepare+0x49/0x1a0 [ 1332.123223] ? irqentry_exit_to_user_mode+0xd/0x20 [ 1332.123225] ? irqentry_exit+0x3f/0x50 [ 1332.123226] ? exc_page_fault+0x8e/0x190 [ 1332.123228] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1332.123232] RIP: 0033:0x7fa74c514a37 [ 1332.123234] RSP: 002b:00007ffe31dd0788 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 1332.123238] RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007fa74c514a37 [ 1332.123239] RDX: 0000000000000008 RSI: 000055e27c447aa0 RDI: 0000000000000001 [ 1332.123241] RBP: 000055e27c447aa0 R08: 00007fa74c5d1460 R09: 000000007fffffff [ 1332.123242] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000008 [ 1332.123244] R13: 00007fa74c61a780 R14: 00007fa74c616600 R15: 00007fa74c615a00 [ 1332.123247] </TASK> Fix this by calling cpufreq_cpu_put() wherever necessary. Fixes: 14eb1c96e3a3 ("cpufreq: amd-pstate: Add test module for amd-pstate driver") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Meng Li <li.meng@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Suggested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-08-22cpufreq: amd-pstate-ut: Remove module parameter accessSwapnil Sapkal1-20/+2
In amd-pstate-ut, shared memory-based systems call get_shared_mem() as part of amd_pstate_ut_check_enabled() function. This function was written when CONFIG_X86_AMD_PSTATE was tristate config and amd_pstate can be built as a module. Currently CONFIG_X86_AMD_PSTATE is a boolean config and module parameter shared_mem is removed. But amd-pstate-ut code still accesses this module parameter. Remove those accesses. Fixes: 456ca88d8a52 ("cpufreq: amd-pstate: change amd-pstate driver to be built-in type") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Meng Li <li.meng@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Suggested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-08-21cpufreq: intel_pstate: set stale CPU frequency to minimumDoug Smythies1-0/+5
The intel_pstate CPU frequency scaling driver does not use policy->cur and it is 0. When the CPU frequency is outdated arch_freq_get_on_cpu() will default to the nominal clock frequency when its call to cpufreq_quick_getpolicy_cur returns the never updated 0. Thus, the listed frequency might be outside of currently set limits. Some users are complaining about the high reported frequency, albeit stale, when their system is idle and/or it is above the reduced maximum they have set. This patch will maintain policy_cur for the intel_pstate driver at the current minimum CPU frequency. Reported-by: Yang Jie <yang.jie@linux.intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217597 Signed-off-by: Doug Smythies <dsmythies@telus.net> [ rjw: White space damage fixes and comment adjustment ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-08-21cpufreq: stats: Improve the performance of cpufreq_stats_create_table()Liao Chang1-1/+2
In the worst case, the freq_table of policy data is not sorted and contains duplicate frequencies, this means that it needs to iterate through the entire freq_table of policy to ensure each frequency is unique in the freq_table of stats data, this has a time complexity of O(N^2), where N is the number of frequencies in the freq_table of policy. However, if the policy.freq_table is already sorted and contains no duplicate frequencies, it can reduce the time complexity of creating stats.freq_table to O(N), the 'freq_table_sorted' field of policy data can be used to indicate whether the policy.freq_table is sorted. Signed-off-by: Liao Chang <liaochang1@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Dhruva Gole <d-gole@ti.com> [ rjw: Fix typo in changelog, remove redundant parens ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-08-17cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fieLiao Chang1-3/+6
The function cppc_freq_invariance_init() may failed to create kworker_fie, make it more robust by setting fie_disabled to FIE_DISBALED to prevent an invalid pointer dereference in kthread_destroy_worker(), which called from cppc_freq_invariance_exit(). Signed-off-by: Liao Chang <liaochang1@huawei.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-08-17cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases.Liao Chang1-2/+2
The cpufreq framework used to use the zero of return value to reflect the cppc_cpufreq_get_rate() had failed to get current frequecy and treat all positive integer to be succeed. Since cppc_get_perf_ctrs() returns a negative integer in error case, so it is better to convert the value to zero as the return value of cppc_cpufreq_get_rate(). Signed-off-by: Liao Chang <liaochang1@huawei.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-08-17cpufreq: Prefer to print cpuid in MIN/MAX QoS register error messageLiao Chang1-4/+4
When a cpufreq_policy is allocated, the cpus, related_cpus and real_cpus of policy are still unset. Therefore, it is preferable to print the passed 'cpu' parameter instead of a empty 'cpus' cpumask in error message when registering MIN/MAX QoS notifier fails. Signed-off-by: Liao Chang <liaochang1@huawei.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-06 15:16:44 +0300