| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
qcom_scm_set_cold/warm_boot_addr() currently take a cpumask parameter,
but it's not very useful because at the end we always set the same entry
address for all CPUs. This also allows speeding up probe of
cpuidle-qcom-spm a bit because only one SCM call needs to be made to
the TrustZone firmware, instead of one per CPU.
The main reason for this change is that it allows implementing the
"multi-cluster" variant of the set_boot_addr() call more easily
without having to rely on functions that break in certain build
configurations or that are not exported to modules.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201130505.257379-4-stephan@gerhold.net
|
|
At the moment, the "qcom-spm-cpuidle" platform device is always created,
even if none of the CPUs is actually managed by the SPM. On non-qcom
platforms this will result in infinite probe-deferral due to the
failing qcom_scm_is_available() call.
To avoid this, look through the CPU DT nodes and check if there is
actually any CPU managed by a SPM (as indicated by the qcom,saw property).
It should also be available because e.g. MSM8916 has qcom,saw defined
but it's typically not enabled with ARM64/PSCI firmwares.
This is needed in preparation of a follow-up change that calls
qcom_scm_set_warm_boot_addr() a single time before registering any
cpuidle drivers. Otherwise this call might be made even on devices
that have this driver enabled but actually make use of PSCI.
Fixes: 60f3692b5f0b ("cpuidle: qcom_spm: Detach state machine from main SPM handling")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/86e3e09f-a8d7-3dff-3fc6-ddd7d30c5d78@samsung.com/
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201130505.257379-2-stephan@gerhold.net
|
|
In commit a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic
CPUidle driver") the SPM driver has been converted to a
generic CPUidle driver: that was mainly made to simplify the
driver and that was a great accomplishment;
Though, at that time, this driver was only applicable to ARM 32-bit SoCs,
lacking logic about the handling of newer generation SAW.
In preparation for the enablement of SPM features on AArch64/ARM64,
split the cpuidle-qcom-spm driver in two: the CPUIdle related
state machine (currently used only on ARM SoCs) stays there, while
the SPM communication handling lands back in soc/qcom/spm.c and
also making sure to not discard the simplifications that were
introduced in the aforementioned commit.
Since now the "two drivers" are split, the SCM dependency in the
main SPM handling is gone and for this reason it was also possible
to move the SPM initialization early: this will also make sure that
whenever the SAW CPUIdle driver is getting initialized, the SPM
driver will be ready to do the job.
Please note that the anticipation of the SPM initialization was
also done to optimize the boot times on platforms that have their
CPU/L2 idle states managed by other means (such as PSCI), while
needing SAW initialization for other purposes, like AVS control.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210729155609.608159-2-angelogioacchino.delregno@somainline.org
|
|
Add MSM8226 register data to SPM AVS Wrapper 2 (SAW2) power controller
driver.
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210612205335.9730-3-bartosz.dudziak@snejp.pl
|
|
The Qualcomm SPM cpuidle driver seems to be the last driver still
using the generic ARM CPUidle infrastructure.
Converting it actually allows us to simplify the driver,
and we end up being able to remove more lines than adding new ones:
- We can parse the CPUidle states in the device tree directly
with dt_idle_states (and don't need to duplicate that
functionality into the spm driver).
- Each "saw" device managed by the SPM driver now directly
registers its own cpuidle driver, removing the need for
any global (per cpu) state.
The device tree binding is the same, so the driver stays
compatible with all old device trees.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
