summaryrefslogtreecommitdiff
path: root/drivers/cpuidle
AgeCommit message (Collapse)AuthorFilesLines
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428Thomas Gleixner1-2/+1
Based on 1 normalized pattern(s): this file is released under the gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 68 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215Thomas Gleixner1-3/+1
Based on 1 normalized pattern(s): this code is licenced under the gpl version 2 as described in the copying file that acompanies the linux kernel extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171439.466585205@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201Thomas Gleixner2-24/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-10/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner2-10/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner5-0/+5
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-10cpuidle: Export the next timer expiration for CPUsUlf Hansson1-2/+17
To be able to predict the sleep duration for a CPU entering idle, it is essential to know the expiration time of the next timer. Both the teo and the menu cpuidle governors already use this information for CPU idle state selection. Moving forward, a similar prediction needs to be made for a group of idle CPUs rather than for a single one and the following changes implement a new genpd governor for that purpose. In order to support that feature, add a new function called tick_nohz_get_next_hrtimer() that will return the next hrtimer expiration time of a given CPU to be invoked after deciding whether or not to stop the scheduler tick on that CPU. Make the cpuidle core call tick_nohz_get_next_hrtimer() right before invoking the ->enter() callback provided by the cpuidle driver for the given state and store its return value in the per-CPU struct cpuidle_device, so as to make it available to code outside of cpuidle. Note that at the point when cpuidle calls tick_nohz_get_next_hrtimer(), the governor's ->select() callback has already returned and indicated whether or not the tick should be stopped, so in fact the value returned by tick_nohz_get_next_hrtimer() always is the next hrtimer expiration time for the given CPU, possibly including the tick (if it hasn't been stopped). Co-developed-by: Lina Iyer <lina.iyer@linaro.org> Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-02cpuidle: exynos: Unify target residency for AFTR and coupled AFTR statesMarek Szyprowski1-1/+1
Since commit 45f1ff59e27c ("cpuidle: Return nohz hint from cpuidle_select()") Exynos CPUidle driver stopped entering C1 (AFTR) mode on Exynos4412-based Trats2 board. Further analysis revealed that the CPUidle framework changed the way it handles predicted timer ticks and reported target residency for the given idle states. As a result, the C1 (AFTR) state was not chosen anymore on completely idle device. The main issue was to high target residency value. The similar C1 (AFTR) state for 'coupled' CPUidle version used 10 times lower value for the target residency, despite the fact that it is the same state from the hardware perspective. The 100000us value for standard C1 (AFTR) mode is there from the begining of the support for this idle state, added by the commit 67173ca492ab ("ARM: EXYNOS: Add support AFTR mode on EXYNOS4210"). That commit doesn't give any reason for it, instead it looks like it was blindly copied from the WFI/IDLE state of the same driver that time. That time, that value was probably not really used by the framework for any critical decision, so it didn't matter that much. Now it turned out to be an issue, so unify the target residency with the 'coupled' version, as it seems to better match the real use case values and restores the operation of the Exynos CPUidle driver on the idle device. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-13cpuidle: governor: Add new governors to cpuidle_governors againRafael J. Wysocki1-0/+1
After commit 61cb5758d3c4 ("cpuidle: Add cpuidle.governor= command line parameter") new cpuidle governors are not added to the list of available governors, so governor selection via sysfs doesn't work as expected (even though it is rarely used anyway). Fix that by making cpuidle_register_governor() add new governors to cpuidle_governors again. Fixes: 61cb5758d3c4 ("cpuidle: Add cpuidle.governor= command line parameter") Reported-by: Kees Cook <keescook@chromium.org> Cc: 5.0+ <stable@vger.kernel.org> # 5.0+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-07cpuidle: menu: Avoid overflows when computing varianceRafael J. Wysocki1-1/+1
The variance computation in get_typical_interval() may overflow if the square of the value of diff exceeds the maximum for the int64_t data type value which basically is the case when it is of the order of UINT_MAX. However, data points so far in the future don't matter for idle state selection anyway, so change the initial threshold value in get_typical_interval() to INT_MAX which will cause more "outlying" data points to be discarded without affecting the selection result. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-01cpuidle: dt: bail out if the idle-state DT node is not compatibleJoseph Lo1-6/+9
Currently, the DT of the idle states will be parsed first whether it's compatible or not. This could cause a warning message that comes from if the CPU doesn't support identical idle states. E.g. Tegra186 can run with 2 Cortex-A57 and 2 Denver cores with different idle states on different types of these cores. So fix it by checking the match node earlier, then it can make sure it only goes through the idle states that the CPU supported. Signed-off-by: Joseph Lo <josephl@nvidia.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-01Merge back earlier cpuidle material for v5.1.Rafael J. Wysocki3-1/+455
2019-01-31cpuidle: poll_state: Fix default time limitDoug Smythies1-1/+1
The default time is declared in units of microsecnds, but is used as nanoseconds, resulting in significant accounting errors for idle state 0 time when all idle states deeper than 0 are disabled. Under these unusual conditions, we don't really care about the poll time limit anyhow. Fixes: 800fb34a99ce ("cpuidle: poll_state: Disregard disable idle states") Signed-off-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-17cpuidle: New timer events oriented governor for tickless systemsRafael J. Wysocki3-1/+455
The venerable menu governor does some things that are quite questionable in my view. First, it includes timer wakeups in the pattern detection data and mixes them up with wakeups from other sources which in some cases causes it to expect what essentially would be a timer wakeup in a time frame in which no timer wakeups are possible (because it knows the time until the next timer event and that is later than the expected wakeup time). Second, it uses the extra exit latency limit based on the predicted idle duration and depending on the number of tasks waiting on I/O, even though those tasks may run on a different CPU when they are woken up. Moreover, the time ranges used by it for the sleep length correction factors depend on whether or not there are tasks waiting on I/O, which again doesn't imply anything in particular, and they are not correlated to the list of available idle states in any way whatever. Also, the pattern detection code in menu may end up considering values that are too large to matter at all, in which cases running it is a waste of time. A major rework of the menu governor would be required to address these issues and the performance of at least some workloads (tuned specifically to the current behavior of the menu governor) is likely to suffer from that. It is thus better to introduce an entirely new governor without them and let everybody use the governor that works better with their actual workloads. The new governor introduced here, the timer events oriented (TEO) governor, uses the same basic strategy as menu: it always tries to find the deepest idle state that can be used in the given conditions. However, it applies a different approach to that problem. First, it doesn't use "correction factors" for the time till the closest timer, but instead it tries to correlate the measured idle duration values with the available idle states and use that information to pick up the idle state that is most likely to "match" the upcoming CPU idle interval. Second, it doesn't take the number of "I/O waiters" into account at all and the pattern detection code in it avoids taking timer wakeups into account. It also only uses idle duration values less than the current time till the closest timer (with the tick excluded) for that purpose. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-12-27Merge tag 'powerpc-4.21-1' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Mitigations for Spectre v2 on some Freescale (NXP) CPUs. - A large series adding support for pass-through of Nvidia V100 GPUs to guests on Power9. - Another large series to enable hardware assistance for TLB table walk on MPC8xx CPUs. - Some preparatory changes to our DMA code, to make way for further cleanups from Christoph. - Several fixes for our Transactional Memory handling discovered by fuzzing the signal return path. - Support for generating our system call table(s) from a text file like other architectures. - A fix to our page fault handler so that instead of generating a WARN_ON_ONCE, user accesses of kernel addresses instead print a ratelimited and appropriately scary warning. - A cosmetic change to make our unhandled page fault messages more similar to other arches and also more compact and informative. - Freescale updates from Scott: "Highlights include elimination of legacy clock bindings use from dts files, an 83xx watchdog handler, fixes to old dts interrupt errors, and some minor cleanup." And many clean-ups, reworks and minor fixes etc. Thanks to: Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao, Christian Lamparter, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Darren Stevens, David Gibson, Diana Craciun, Dmitry V. Levin, Firoz Khan, Geert Uytterhoeven, Greg Kurz, Gustavo Romero, Hari Bathini, Joel Stanley, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal Suchánek, Naveen N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Ram Pai, Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen Rothwell, Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian Tang, Yue Haibing" * tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (201 commits) Revert "powerpc/fsl_pci: simplify fsl_pci_dma_set_mask" powerpc/zImage: Also check for stdout-path powerpc: Fix HMIs on big-endian with CONFIG_RELOCATABLE=y macintosh: Use of_node_name_{eq, prefix} for node name comparisons ide: Use of_node_name_eq for node name comparisons powerpc: Use of_node_name_eq for node name comparisons powerpc/pseries/pmem: Convert to %pOFn instead of device_node.name powerpc/mm: Remove very old comment in hash-4k.h powerpc/pseries: Fix node leak in update_lmb_associativity_index() powerpc/configs/85xx: Enable CONFIG_DEBUG_KERNEL powerpc/dts/fsl: Fix dtc-flagged interrupt errors clk: qoriq: add more compatibles strings powerpc/fsl: Use new clockgen binding powerpc/83xx: handle machine check caused by watchdog timer powerpc/fsl-rio: fix spelling mistake "reserverd" -> "reserved" powerpc/fsl_pci: simplify fsl_pci_dma_set_mask arch/powerpc/fsl_rmu: Use dma_zalloc_coherent vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver vfio_pci: Allow regions to add own capabilities vfio_pci: Allow mapping extra regions ...
2018-12-13cpuidle: Add 'above' and 'below' idle state metricsRafael J. Wysocki2-1/+36
Add two new metrics for CPU idle states, "above" and "below", to count the number of times the given state had been asked for (or entered from the kernel's perspective), but the observed idle duration turned out to be too short or too long for it (respectively). These metrics help to estimate the quality of the CPU idle governor in use. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-11cpuidle: big.LITTLE: fix refcount leakYangtao Li1-1/+6
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. bl_idle_init() doesn't do that, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-11cpuidle: Add cpuidle.governor= command line parameterRafael J. Wysocki3-2/+9
Add cpuidle.governor= command line parameter to allow the default cpuidle governor to be replaced. That is useful, for example, if someone running a tickful kernel wants to use the menu governor on it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-11cpuidle: poll_state: Disregard disable idle statesRafael J. Wysocki1-1/+10
When computing the limit of time to spend in the loop in poll_idle(), use the target residency of the first enabled idle state deeper than state 0 instead of always using the target residency of state 1. This helps when state 1 is disabled for diagnostics, for instance. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-04powerpc/pseries/cpuidle: Fix preempt warningBreno Leitao1-1/+7
When booting a pseries kernel with PREEMPT enabled, it dumps the following warning: BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 caller is pseries_processor_idle_init+0x5c/0x22c CPU: 13 PID: 1 Comm: swapper/0 Not tainted 4.20.0-rc3-00090-g12201a0128bc-dirty #828 Call Trace: [c000000429437ab0] [c0000000009c8878] dump_stack+0xec/0x164 (unreliable) [c000000429437b00] [c0000000005f2f24] check_preemption_disabled+0x154/0x160 [c000000429437b90] [c000000000cab8e8] pseries_processor_idle_init+0x5c/0x22c [c000000429437c10] [c000000000010ed4] do_one_initcall+0x64/0x300 [c000000429437ce0] [c000000000c54500] kernel_init_freeable+0x3f0/0x500 [c000000429437db0] [c0000000000112dc] kernel_init+0x2c/0x160 [c000000429437e20] [c00000000000c1d0] ret_from_kernel_thread+0x5c/0x6c This happens because the code calls get_lppaca() which calls get_paca() and it checks if preemption is disabled through check_preemption_disabled(). Preemption should be disabled because the per CPU variable may make no sense if there is a preemption (and a CPU switch) after it reads the per CPU data and when it is used. In this device driver specifically, it is not a problem, because this code just needs to have access to one lppaca struct, and it does not matter if it is the current per CPU lppaca struct or not (i.e. when there is a preemption and a CPU migration). That said, the most appropriate fix seems to be related to avoiding the debug_smp_processor_id() call at get_paca(), instead of calling preempt_disable() before get_paca(). Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-08ARM: cpuidle: Convert to use cpuidle_register|unregister()Ulf Hansson1-27/+3
The only reason that remains, to why the ARM cpuidle driver calls cpuidle_register_driver(), is to avoid printing an error message in case another driver already have been registered for the CPU. This seems a bit silly, but more importantly, if that is a common scenario, perhaps we should change cpuidle_register() accordingly instead. In either case, let's consolidate the code, by converting to use cpuidle_register|unregister(), which also avoids the unnecessary allocation of the struct cpuidle_device. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-08ARM: cpuidle: Don't register the driver when back-end init returns -ENXIOUlf Hansson1-12/+10
There's no point to register the cpuidle driver for the current CPU, when the initialization of the arch specific back-end data fails by returning -ENXIO. Instead, let's re-order the sequence to its original flow, by first trying to initialize the back-end part and then act accordingly on the returned error code. Additionally, let's print the error message, no matter of what error code that was returned. Fixes: a0d46a3dfdc3 (ARM: cpuidle: Register per cpuidle device) Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: 4.19+ <stable@vger.kernel.org> # v4.19+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-30Merge tag 'pm-4.20-rc1-2' of ↵Linus Torvalds1-19/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These remove a questionable heuristic from the menu cpuidle governor, fix a recent build regression in the intel_pstate driver, clean up ARM big-Little support in cpufreq and fix up hung task watchdog's interaction with system-wide power management transitions. Specifics: - Fix build regression in the intel_pstate driver that doesn't build without CONFIG_ACPI after recent changes (Dominik Brodowski). - One of the heuristics in the menu cpuidle governor is based on a function returning 0 most of the time, so drop it and clean up the scheduler code related to it (Daniel Lezcano). - Prevent the arm_big_little cpufreq driver from being used on ARM64 which is not suitable for it and drop the arm_big_little_dt driver that is not used any more (Sudeep Holla). - Prevent the hung task watchdog from triggering during resume from system-wide sleep states by disabling it before freezing tasks and enabling it again after they have been thawed (Vitaly Kuznetsov)" * tag 'pm-4.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: kernel: hung_task.c: disable on suspend cpufreq: remove unused arm_big_little_dt driver cpufreq: drop ARM_BIG_LITTLE_CPUFREQ support for ARM64 cpufreq: intel_pstate: Fix compilation for !CONFIG_ACPI cpuidle: menu: Remove get_loadavg() from the performance multiplier sched: Factor out nr_iowait and nr_iowait_cpu
2018-10-27sched: loadavg: consolidate LOAD_INT, LOAD_FRAC, CALC_LOADJohannes Weiner1-4/+0
There are several definitions of those functions/macros in places that mess with fixed-point load averages. Provide an official version. [akpm@linux-foundation.org: fix missed conversion in block/blk-iolatency.c] Link: http://lkml.kernel.org/r/20180828172258.3185-5-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Suren Baghdasaryan <surenb@google.com> Tested-by: Daniel Drake <drake@endlessm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-25cpuidle: menu: Remove get_loadavg() from the performance multiplierDaniel Lezcano1-19/+6
The function get_loadavg() returns almost always zero. To be more precise, statistically speaking for a total of 1023379 times passing in the function, the load is equal to zero 1020728 times, greater than 100, 610 times, the remaining is between 0 and 5. In 2011, the get_loadavg() was removed from the Android tree because of the above [1]. At this time, the load was: unsigned long this_cpu_load(void) { struct rq *this = this_rq(); return this->cpu_load[0]; } In 2014, the code was changed by commit 372ba8cb46b2 (cpuidle: menu: Lookup CPU runqueues less) and the load is: void get_iowait_load(unsigned long *nr_waiters, unsigned long *load) { struct rq *rq = this_rq(); *nr_waiters = atomic_read(&rq->nr_iowait); *load = rq->load.weight; } with the same result. Both measurements show using the load in this code path does no matter anymore. Removing it. [1] https://android.googlesource.com/kernel/common/+/4dedd9f124703207895777ac6e91dacde0f7cc17 Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-18cpuidle: menu: Avoid computations when result will be discardedRafael J. Wysocki1-3/+16
If the minimum interval taken into account in the average computation loop in get_typical_interval() is less than the expected idle duration determined so far, the resultant average cannot be greater than that value as well and the entire return result of the function is going to be discarded anyway going forward. In that case, it is a waste of time to carry out the remaining computations in get_typical_interval(), so avoid that by returning early if the minimum interval is not below the expected idle duration. No intentional changes of behavior. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-18cpuidle: menu: Drop redundant comparisonRafael J. Wysocki1-6/+1
Since the correction factor cannot be greater than RESOLUTION * DECAY, the result of the predicted_us computation in menu_select() cannot be greater than data->next_timer_us, so it is not necessary to compare the "typical interval" value coming from get_typical_interval() with data->next_timer_us separately. It is sufficient to copmare predicted_us with the return value of get_typical_interval() directly, so do that and drop the now redundant expected_interval variable. No intentional changes of behavior. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-12cpuidle: menu: Simplify checks related to the polling stateRafael J. Wysocki1-4/+4
After some recent menu governor changes, the promotion of the "polling" state to a physical one is mostly controlled by the latency limit (resulting from the "interactivity" factor) and not by the time to the closest timer event, so it should be sufficient to check the exit latency of that state for this purpose (of course, its target residency still needs to be within the next timer event range for energy-efficiency). Also, the physical state the "polling" one is promoted to need not be the next one in principle (in case the next state is disabled, for example). For these reasons, simplify the checks made to decide whether or not to promote the "polling" state to a physical one and update the target idle duration when it is promoted in case the residency of the new state turns out to be above the tick boundary (in which case there is no reason to stop the tick). Tested-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-04cpuidle: poll_state: Revise loop termination conditionRafael J. Wysocki1-2/+2
If need_resched() returns "false", breaking out of the loop in poll_idle() will cause a new idle state to be selected, so in fact it usually doesn't make sense to spin in it longer than the target residency of the second state. [Note that the "polling" state is used only if there is at least one "real" state defined in addition to it, so the second state is always there.] On the other hand, breaking out of it early (say in case the next state is disabled) shouldn't hurt as it is polling anyway. For this reason, make the loop in poll_idle() break if the CPU has been spinning longer than the target residency of the second state (the "polling" state can only be state[0]). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-04cpuidle: menu: Move the latency_req == 0 special case checkRafael J. Wysocki1-7/+1
It is better to always update data->bucket before returning from menu_select() to avoid updating the correction factor for a stale bucket, so combine the latency_req == 0 special check with the more general check below. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2018-10-04cpuidle: menu: Avoid computations for very close timersRafael J. Wysocki1-0/+12
If the next timer event (not including the tick) is closer than the target residency of the second state or the PM QoS latency constraint is below its exit latency, state[0] will be used regardless of any other factors, so skip the computations in menu_select() then and return 0 straight away from it. Still, do that after the bucket has been determined to avoid updating the correction factor for a stale bucket. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2018-10-04cpuidle: menu: Do not update last_state_idx in menu_select()Rafael J. Wysocki1-5/+2
It is not necessary to update data->last_state_idx in menu_select() as it only is used in menu_update() which only runs when data->needs_update is set and that is set only when updating data->last_state_idx in menu_reflect(). Accordingly, drop the update of data->last_state_idx from menu_select() and get rid of the (now redundant) "out" label from it. No intentional behavior changes. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-10-04cpuidle: menu: Get rid of first_idx from menu_select()Rafael J. Wysocki1-18/+14
Rearrange the code in menu_select() so that the loop over idle states always starts from 0 and get rid of the first_idx variable. While at it, add two empty lines to separate conditional statements from one another. No intentional behavior changes. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-10-04cpuidle: menu: Compute first_idx when latency_req is knownRafael J. Wysocki1-16/+16
Since menu_select() can only set first_idx to 1 if the exit latency of the second state is not greater than the latency limit, it should first determine that limit. Thus first_idx should be computed after the "interactivity" factor has been taken into account. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewedy-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-10-04cpuidle: menu: Fix wakeup statistics updates for polling stateRafael J. Wysocki2-1/+15
If the CPU exits the "polling" state due to the time limit in the loop in poll_idle(), this is not a real wakeup and it just means that the "polling" state selection was not adequate. The governor mispredicted short idle duration, but had a more suitable state been selected, the CPU might have spent more time in it. In fact, there is no reason to expect that there would have been a wakeup event earlier than the next timer in that case. Handling such cases as regular wakeups in menu_update() may cause the menu governor to make suboptimal decisions going forward, but ignoring them altogether would not be correct either, because every time menu_select() is invoked, it makes a separate new attempt to predict the idle duration taking distinct time to the closest timer event as input and the outcomes of all those attempts should be recorded. For this reason, make menu_update() always assume that if the "polling" state was exited due to the time limit, the next proper wakeup event for the CPU would be the next timer event (not including the tick). Fixes: a37b969a61c1 "cpuidle: poll_state: Add time limit to poll_idle()" Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-10-03cpuidle: menu: Replace data->predicted_us with local variableRafael J. Wysocki1-12/+11
The predicted_us field in struct menu_device is only accessed in menu_select(), so replace it with a local variable in that function. With that, stop using expected_interval instead of predicted_us to store the new predicted idle duration value if it is set to the selected state's target residency which is quite confusing. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-09-18cpuidle: enter_state: Don't needlessly calculate diff timeFieah Lim1-8/+8
Currently, ktime_us_delta() is invoked unconditionally to compute the idle residency of the CPU, but it only makes sense to do that if a valid idle state has been entered, so move the ktime_us_delta() invocation after the entered_state >= 0 check. While at it, merge two comment blocks in there into one and drop a space between type casting of diff. This patch has no functional changes. Signed-off-by: Fieah Lim <kw@fieahl.im> [ rjw: Changelog cleanup, comment format fix ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-09-18cpuidle: Remove unnecessary wrapper cpuidle_get_last_residency()Fieah Lim2-2/+2
cpuidle_get_last_residency() is just a wrapper for retrieving the last_residency member of struct cpuidle_device. It's also weirdly the only wrapper function for accessing cpuidle_* struct member (by my best guess is it could be a leftover from v2.x). Anyhow, since the only two users (the ladder and menu governors) can access dev->last_residency directly, and it's more intuitive to do it that way, let's just get rid of the wrapper. This patch tidies up CPU idle code a bit without functional changes. Signed-off-by: Fieah Lim <kw@fieahl.im> [ rjw: Changelog cleanup ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-25cpuidle: menu: Retain tick when shallow state is selectedRafael J. Wysocki1-1/+12
The case addressed by commit 5ef499cd571c (cpuidle: menu: Handle stopped tick more aggressively) in the stopped tick case is present when the tick has not been stopped yet too. Namely, if only two CPU idle states, shallow state A with target residency significantly below the tick boundary and deep state B with target residency significantly above it, are available and the predicted idle duration is above the tick boundary, but below the target residency of state B, state A will be selected and the CPU may spend indefinite amount of time in it, which is not quite energy-efficient. However, if the tick has not been stopped yet and the governor is about to select a shallow idle state for the CPU even though the idle duration predicted by it is above the tick boundary, it should be fine to wake up the CPU early, so the tick can be retained then and the governor will have a chance to select a deeper state when it runs next time. [Note that when this really happens, it will make the idle duration predictor believe that the CPU might be idle longer than predicted, which will make it more likely to predict longer idle durations going forward, but that will also cause deeper idle states to be selected going forward, on average, which is what's needed here.] Fixes: 87c9fe6ee495 (cpuidle: menu: Avoid selecting shallow states with stopped tick) Reported-by: Leo Yan <leo.yan@linaro.org> Cc: 4.17+ <stable@vger.kernel.org> # 4.17+: 5ef499cd571c (cpuidle: menu: Handle ...) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-22Merge tag 'pm-4.19-rc1-2' of ↵Linus Torvalds1-17/+28
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These fix the main idle loop and the menu cpuidle governor, clean up the latter, fix a mistake in the PCI bus type's support for system suspend and resume, fix the ondemand and conservative cpufreq governors, address a build issue in the system wakeup framework and make the ACPI C-states desciptions less confusing. Specifics: - Make the idle loop handle stopped scheduler tick correctly (Rafael Wysocki). - Prevent the menu cpuidle governor from letting CPUs spend too much time in shallow idle states when it is invoked with scheduler tick stopped and clean it up somewhat (Rafael Wysocki). - Avoid invoking the platform firmware to make the platform enter the ACPI S3 sleep state with suspended PCIe root ports which may confuse the firmware and cause it to crash (Rafael Wysocki). - Fix sysfs-related race in the ondemand and conservative cpufreq governors which may cause the system to crash if the governor module is removed during an update of CPU frequency limits (Henry Willard). - Select SRCU when building the system wakeup framework to avoid a build issue in it (zhangyi). - Make the descriptions of ACPI C-states vendor-neutral to avoid confusion (Prarit Bhargava)" * tag 'pm-4.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: menu: Handle stopped tick more aggressively sched: idle: Avoid retaining the tick when it has been stopped PCI / ACPI / PM: Resume all bridges on suspend-to-RAM cpuidle: menu: Update stale polling override comment cpufreq: governor: Avoid accessing invalid governor_data x86/ACPI/cstate: Make APCI C1 FFH MWAIT C-state description vendor-neutral cpuidle: menu: Fix white space PM / sleep: wakeup: Fix build error caused by missing SRCU support
2018-08-20cpuidle: menu: Handle stopped tick more aggressivelyRafael J. Wysocki1-12/+24
Commit 87c9fe6ee495 (cpuidle: menu: Avoid selecting shallow states with stopped tick) missed the case when the target residencies of deep idle states of CPUs are above the tick boundary which may cause the CPU to get stuck in a shallow idle state for a long time. Say there are two CPU idle states available: one shallow, with the target residency much below the tick boundary and one deep, with the target residency significantly above the tick boundary. In that case, if the tick has been stopped already and the expected next timer event is relatively far in the future, the governor will assume the idle duration to be equal to TICK_USEC and it will select the idle state for the CPU accordingly. However, that will cause the shallow state to be selected even though it would have been more energy-efficient to select the deep one. To address this issue, modify the governor to always use the time till the closest timer event instead of the predicted idle duration if the latter is less than the tick period length and the tick has been stopped already. Also make it extend the search for a matching idle state if the tick is stopped to avoid settling on a shallow state if deep states with target residencies above the tick period length are available. In addition, make it always indicate that the tick should be stopped if it has been stopped already for consistency. Fixes: 87c9fe6ee495 (cpuidle: menu: Avoid selecting shallow states with stopped tick) Reported-by: Leo Yan <leo.yan@linaro.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: 4.17+ <stable@vger.kernel.org> # 4.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-17Merge tag 'powerpc-4.19-1' of ↵Linus Torvalds1-132/+26
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - A fix for a bug in our page table fragment allocator, where a page table page could be freed and reallocated for something else while still in use, leading to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for a powerpc only refcount. - Fixes to our pkey support. Several are user-visible changes, but bring us in to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer for reporting many of these. - A series to improve the hvc driver & related OPAL console code, which have been seen to cause hardlockups at times. The hvc driver changes in particular have been in linux-next for ~month. - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y. - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use anywhere other than as a paper weight. - An optimised memcmp implementation using Power7-or-later VMX instructions - Support for barrier_nospec on some NXP CPUs. - Support for flushing the count cache on context switch on some IBM CPUs (controlled by firmware), as a Spectre v2 mitigation. - A series to enhance the information we print on unhandled signals to bring it into line with other arches, including showing the offending VMA and dumping the instructions around the fault. Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand, Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao, zhong jiang" * tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits) powerpc/mm/book3s/radix: Add mapping statistics powerpc/uaccess: Enable get_user(u64, *p) on 32-bit powerpc/mm/hash: Remove unnecessary do { } while(0) loop powerpc/64s: move machine check SLB flushing to mm/slb.c powerpc/powernv/idle: Fix build error powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range powerpc/mm: remove warning about ‘type’ being set powerpc/32: Include setup.h header file to fix warnings powerpc: Move `path` variable inside DEBUG_PROM powerpc/powermac: Make some functions static powerpc/powermac: Remove variable x that's never read cxl: remove a dead branch powerpc/powermac: Add missing include of header pmac.h powerpc/kexec: Use common error handling code in setup_new_fdt() powerpc/xmon: Add address lookup for percpu symbols powerpc/mm: remove huge_pte_offset_and_shift() prototype powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled powerpc/pseries: Fix endianness while restoring of r3 in MCE handler. powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements powerpc/fadump: handle crash memory ranges array index overflow ...
2018-08-17cpuidle: menu: Update stale polling override commentRafael J. Wysocki1-3/+2
The comment to explain why the menu governor uses idle state 1 instead of idle state 0 as the first one sometimes is stale (among other things it mentions a user setting not present any more), so update it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-15cpuidle: menu: Fix white spaceRafael J. Wysocki1-2/+2
Fix some damaged white space in menu_select(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-31powernv/cpuidle: Use parsed device tree values for cpuidle_initAkshay Adiga1-132/+26
Export pnv_idle_states and nr_pnv_idle_states so that its accessible to cpuidle driver. Use properties from pnv_idle_states structure for powernv cpuidle_init. Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-25ARM: cpuidle: silence error on driver registration failureSudeep Holla1-1/+2
It's perfectly fine to have multiple cpuidle driver compiled in the build configuration. However, it's not good to throw error on driver registration failure if some other driver is already initialised and assigned. In such cases, __cpuidle_register_driver returns -EBUSY and we can check for such error before throwing the error. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-07Merge tag 'powerpc-4.18-1' of ↵Linus Torvalds1-6/+26
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Support for split PMD page table lock on 64-bit Book3S (Power8/9). - Add support for HAVE_RELIABLE_STACKTRACE, so we properly support live patching again. - Add support for patching barrier_nospec in copy_from_user() and syscall entry. - A couple of fixes for our data breakpoints on Book3S. - A series from Nick optimising TLB/mm handling with the Radix MMU. - Numerous small cleanups to squash sparse/gcc warnings from Mathieu Malaterre. - Several series optimising various parts of the 32-bit code from Christophe Leroy. - Removal of support for two old machines, "SBC834xE" and "C2K" ("GEFanuc,C2K"), which is why the diffstat has so many deletions. And many other small improvements & fixes. There's a few out-of-area changes. Some minor ftrace changes OK'ed by Steve, and a fix to our powernv cpuidle driver. Then there's a series touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details around pkey support. It was ack'ed/reviewed by Ingo & Dave and has been in next for several weeks. Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre, Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao, Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe, Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing" * tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits) powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap cpuidle: powernv: Fix promotion from snooze if next state disabled powerpc: fix build failure by disabling attribute-alias warning in pci_32 ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait() powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted" powerpc: fix spelling mistake: "Usupported" -> "Unsupported" powerpc/pkeys: Detach execute_only key on !PROT_EXEC powerpc/powernv: copy/paste - Mask SO bit in CR powerpc: Remove core support for Marvell mv64x60 hostbridges powerpc/boot: Remove core support for Marvell mv64x60 hostbridges powerpc/boot: Remove support for Marvell mv64x60 i2c controller powerpc/boot: Remove support for Marvell MPSC serial controller powerpc/embedded6xx: Remove C2K board support powerpc/lib: optimise PPC32 memcmp powerpc/lib: optimise 32 bits __clear_user() powerpc/time: inline arch_vtime_task_switch() powerpc/Makefile: set -mcpu=860 flag for the 8xx powerpc: Implement csum_ipv6_magic in assembly powerpc/32: Optimise __csum_partial() powerpc/lib: Adjust .balign inside string functions for PPC32 ...
2018-06-05cpuidle: powernv: Fix promotion from snooze if next state disabledGautham R. Shenoy1-6/+26
The commit 78eaa10f027c ("cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state") introduced a timeout for the snooze idle state so that it could be eventually be promoted to a deeper idle state. The snooze timeout value is static and set to the target residency of the next idle state, which would train the cpuidle governor to pick the next idle state eventually. The unfortunate side-effect of this is that if the next idle state(s) is disabled, the CPU will forever remain in snooze, despite the fact that the system is completely idle, and other deeper idle states are available. This patch fixes the issue by dynamically setting the snooze timeout to the target residency of the next enabled state on the device. Before Patch: POWER8 : Only nap disabled. $ cpupower monitor sleep 30 sleep took 30.01297 seconds and exited with status 0 |Idle_Stats PKG |CORE|CPU | snoo | Nap | Fast 0| 8| 0| 96.41| 0.00| 0.00 0| 8| 1| 96.43| 0.00| 0.00 0| 8| 2| 96.47| 0.00| 0.00 0| 8| 3| 96.35| 0.00| 0.00 0| 8| 4| 96.37| 0.00| 0.00 0| 8| 5| 96.37| 0.00| 0.00 0| 8| 6| 96.47| 0.00| 0.00 0| 8| 7| 96.47| 0.00| 0.00 POWER9: Shallow states (stop0lite, stop1lite, stop2lite, stop0, stop1, stop2) disabled: $ cpupower monitor sleep 30 sleep took 30.05033 seconds and exited with status 0 |Idle_Stats PKG |CORE|CPU | snoo | stop | stop | stop | stop | stop | stop | stop | stop 0| 16| 0| 89.79| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 16| 1| 90.12| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 16| 2| 90.21| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 16| 3| 90.29| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 After Patch: POWER8 : Only nap disabled. $ cpupower monitor sleep 30 sleep took 30.01200 seconds and exited with status 0 |Idle_Stats PKG |CORE|CPU | snoo | Nap | Fast 0| 8| 0| 16.58| 0.00| 77.21 0| 8| 1| 18.42| 0.00| 75.38 0| 8| 2| 4.70| 0.00| 94.09 0| 8| 3| 17.06| 0.00| 81.73 0| 8| 4| 3.06| 0.00| 95.73 0| 8| 5| 7.00| 0.00| 96.80 0| 8| 6| 1.00| 0.00| 98.79 0| 8| 7| 5.62| 0.00| 94.17 POWER9: Shallow states (stop0lite, stop1lite, stop2lite, stop0, stop1, stop2) disabled: $ cpupower monitor sleep 30 sleep took 30.02110 seconds and exited with status 0 |Idle_Stats PKG |CORE|CPU | snoo | stop | stop | stop | stop | stop | stop | stop | stop 0| 0| 0| 0.69| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 9.39| 89.70 0| 0| 1| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.05| 93.21 0| 0| 2| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 89.93 0| 0| 3| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 93.26 Fixes: 78eaa10f027c ("cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-31cpuidle: governors: Consolidate PM QoS handlingRafael J. Wysocki3-17/+18
There is some code duplication related to the PM QoS handling between the existing cpuidle governors, so move that code to a common helper function and call that from the governors. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-31cpuidle: governors: Drop redundant checks related to PM QoSRafael J. Wysocki2-4/+2
PM_QOS_RESUME_LATENCY_NO_CONSTRAINT is defined as the 32-bit integer maximum, so it is not necessary to test the return value of dev_pm_qos_raw_read_value() against it directly in the menu and ladder cpuidle governors. Drop these redundant checks. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>