summaryrefslogtreecommitdiff
path: root/drivers/cpuidle
AgeCommit message (Collapse)AuthorFilesLines
2024-04-13cpuidle: Avoid potential overflow in integer multiplicationC Cheng1-1/+2
[ Upstream commit 88390dd788db485912ee7f9a8d3d56fc5265d52f ] In detail: In C language, when you perform a multiplication operation, if both operands are of int type, the multiplication operation is performed on the int type, and then the result is converted to the target type. This means that if the product of int type multiplication exceeds the range that int type can represent, an overflow will occur even if you store the result in a variable of int64_t type. For a multiplication of two int values, it is better to use mul_u32_u32() rather than s->exit_latency_ns = s->exit_latency * NSEC_PER_USEC to avoid potential overflow happenning. Signed-off-by: C Cheng <C.Cheng@mediatek.com> Signed-off-by: Bo Ye <bo.ye@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> [ rjw: New subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPTRussell Currey1-7/+1
[ Upstream commit eac030b22ea12cdfcbb2e941c21c03964403c63f ] lppaca_shared_proc() takes a pointer to the lppaca which is typically accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads to checking if preemption is enabled, for example: BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693 caller is lparcfg_data+0x408/0x19a0 CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2 Call Trace: dump_stack_lvl+0x154/0x200 (unreliable) check_preemption_disabled+0x214/0x220 lparcfg_data+0x408/0x19a0 ... This isn't actually a problem however, as it does not matter which lppaca is accessed, the shared proc state will be the same. vcpudispatch_stats_procfs_init() already works around this by disabling preemption, but the lparcfg code does not, erroring any time /proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled. Instead of disabling preemption on the caller side, rework lppaca_shared_proc() to not take a pointer and instead directly access the lppaca, bypassing any potential preemption checks. Fixes: f13c13a00512 ("powerpc: Stop using non-architected shared_proc field in lppaca") Signed-off-by: Russell Currey <ruscur@russell.cc> [mpe: Rework to avoid needing a definition in paca.h and lppaca.h] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230823055317.751786-4-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23cpuidle: psci: Move enabling OSI mode after power domains creationMaulik Shah1-26/+13
[ Upstream commit 12acb348fa4528a4203edf1cce7a3be2c9af2279 ] A switch from OSI to PC mode is only possible if all CPUs other than the calling one are OFF, either through a call to CPU_OFF or not yet booted. Currently OSI mode is enabled before power domains are created. In cases where CPUidle states are not using hierarchical CPU topology the bail out path tries to switch back to PC mode which gets denied by firmware since other CPUs are online at this point and creates inconsistent state as firmware is in OSI mode and Linux in PC mode. This change moves enabling OSI mode after power domains are created, this would makes sure that hierarchical CPU topology is used before switching firmware to OSI mode. Cc: stable@vger.kernel.org Fixes: 70c179b49870 ("cpuidle: psci: Allow PM domain to be initialized even if no OSI mode") Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23cpuidle: psci: Extend information in log about OSI/PC modeUlf Hansson1-1/+2
[ Upstream commit 668057b07db069daac3ca4e4978f8373db9cb71c ] It's useful to understand whether we are using OS-initiated (OSI) mode or Platform Coordinated (PC) mode, when initializing the CPU PM domains. Therefore, let's extend the print in the log after a successful probe with this information. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Stable-dep-of: 12acb348fa45 ("cpuidle: psci: Move enabling OSI mode after power domains creation") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-16cpuidle: dt_idle_genpd: Add helper function to remove genpd topologyMaulik Shah2-0/+31
commit 9a8fa00dad3c7b260071f2f220cfb00505372c40 upstream. Genpd parent and child domain topology created using dt_idle_pd_init_topology() needs to be removed during error cases. Add new helper function dt_idle_pd_remove_topology() for same. Cc: stable@vger.kernel.org Reviewed-by: Ulf Hanssson <ulf.hansson@linaro.org> Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11RISC-V: Align SBI probe implementation with specAndrew Jones1-1/+1
commit 41cad8284d5e6bf1d49d3c10a6b52ee1ae866a20 upstream. sbi_probe_extension() is specified with "Returns 0 if the given SBI extension ID (EID) is not available, or 1 if it is available unless defined as any other non-zero value by the implementation." Additionally, sbiret.value is a long. Fix the implementation to ensure any nonzero long value is considered a success, rather than only positive int values. Fixes: b9dcd9e41587 ("RISC-V: Add basic support for SBI v0.2") Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230427163626.101042-1-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22cpuidle: psci: Iterate backwards over list in psci_pd_remove()Shawn Guo1-1/+2
commit 6b0313c2fa3d2cf991c9ffef6fae6e7ef592ce6d upstream. In case that psci_pd_init_topology() fails for some reason, psci_pd_remove() will be responsible for deleting provider and removing genpd from psci_pd_providers list. There will be a failure when removing the cluster PD, because the cpu (child) PDs haven't been removed. [ 0.050232] CPUidle PSCI: init PM domain cpu0 [ 0.050278] CPUidle PSCI: init PM domain cpu1 [ 0.050329] CPUidle PSCI: init PM domain cpu2 [ 0.050370] CPUidle PSCI: init PM domain cpu3 [ 0.050422] CPUidle PSCI: init PM domain cpu-cluster0 [ 0.050475] PM: genpd_remove: unable to remove cpu-cluster0 [ 0.051412] PM: genpd_remove: removed cpu3 [ 0.051449] PM: genpd_remove: removed cpu2 [ 0.051499] PM: genpd_remove: removed cpu1 [ 0.051546] PM: genpd_remove: removed cpu0 Fix the problem by iterating the provider list reversely, so that parent PD gets removed after child's PDs like below. [ 0.029052] CPUidle PSCI: init PM domain cpu0 [ 0.029076] CPUidle PSCI: init PM domain cpu1 [ 0.029103] CPUidle PSCI: init PM domain cpu2 [ 0.029124] CPUidle PSCI: init PM domain cpu3 [ 0.029151] CPUidle PSCI: init PM domain cpu-cluster0 [ 0.029647] PM: genpd_remove: removed cpu0 [ 0.029666] PM: genpd_remove: removed cpu1 [ 0.029690] PM: genpd_remove: removed cpu2 [ 0.029714] PM: genpd_remove: removed cpu3 [ 0.029738] PM: genpd_remove: removed cpu-cluster0 Fixes: a65a397f2451 ("cpuidle: psci: Add support for PM domains by using genpd") Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+ Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10cpuidle: add ARCH_SUSPEND_POSSIBLE dependenciesArnd Bergmann1-0/+2
commit 7787943a3a8ade6594a68db28c166adbb1d3708c upstream. Some ARMv4 processors don't support suspend, which leads to a build failure with the tegra and qualcomm cpuidle driver: WARNING: unmet direct dependencies detected for ARM_CPU_SUSPEND Depends on [n]: ARCH_SUSPEND_POSSIBLE [=n] Selected by [y]: - ARM_TEGRA_CPUIDLE [=y] && CPU_IDLE [=y] && (ARM [=y] || ARM64) && (ARCH_TEGRA [=n] || COMPILE_TEST [=y]) && !ARM64 && MMU [=y] arch/arm/kernel/sleep.o: in function `__cpu_suspend': (.text+0x68): undefined reference to `cpu_sa110_suspend_size' (.text+0x68): undefined reference to `cpu_fa526_suspend_size' Add an explicit dependency to make randconfig builds avoid this combination. Fixes: faae6c9f2e68 ("cpuidle: tegra: Enable compile testing") Fixes: a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver") Link: https://lore.kernel.org/all/20211013160125.772873-1-arnd@kernel.org/ Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31cpuidle: dt: Return the correct numbers of parsed idle statesUlf Hansson1-1/+1
[ Upstream commit ee3c2c8ad6ba6785f14a60e4081d7c82e88162a2 ] While we correctly skips to initialize an idle state from a disabled idle state node in DT, the returned value from dt_init_idle_driver() don't get adjusted accordingly. Instead the number of found idle state nodes are returned, while the callers are expecting the number of successfully initialized idle states from DT. This leads to cpuidle drivers unnecessarily continues to initialize their idle state specific data. Moreover, in the case when all idle states have been disabled in DT, we would end up registering a cpuidle driver, rather than relying on the default arch specific idle call. Fixes: 9f14da345599 ("drivers: cpuidle: implement DT based idle states infrastructure") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-09Merge tag 'riscv-for-linus-6.1-mw1' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Improvements to the CPU topology subsystem, which fix some issues where RISC-V would report bad topology information. - The default NR_CPUS has increased to XLEN, and the maximum configurable value is 512. - The CD-ROM filesystems have been enabled in the defconfig. - Support for THP_SWAP has been added for rv64 systems. There are also a handful of cleanups and fixes throughout the tree. * tag 'riscv-for-linus-6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: enable THP_SWAP for RV64 RISC-V: Print SSTC in canonical order riscv: compat: s/failed/unsupported if compat mode isn't supported RISC-V: Increase range and default value of NR_CPUS cpuidle: riscv-sbi: Fix CPU_PM_CPU_IDLE_ENTER_xyz() macro usage perf: RISC-V: throttle perf events perf: RISC-V: exclude invalid pmu counters from SBI calls riscv: enable CD-ROM file systems in defconfig riscv: topology: fix default topology reporting arm64: topology: move store_cpu_topology() to shared code
2022-10-06Merge tag 'arm-drivers-6.1' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "The drivers branch for 6.1 is a bit larger than for most releases. Most of the changes come from SoC maintainers for the drivers/soc subsystem: - A new driver for error handling on the NVIDIA Tegra 'control backbone' bus. - A new driver for Qualcomm LLCC/DDR bandwidth measurement - New Rockchip rv1126 and rk3588 power domain drivers - DT binding updates for memory controllers, older Rockchip SoCs, various Mediatek devices, Qualcomm SCM firmware - Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the Apple rtkit firmware driver, Tegra firmware - Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra, Qualcomm, Broadcom, NXP, ...) There are also some separate subsystem with downstream maintainers that merge updates this way: - Various updates and new drivers in the memory controller subsystem for Mediatek and Broadcom SoCs - Small set of changes in preparation to add support for FF-A v1.1 specification later, in the Arm FF-A firmware subsystem - debugfs support in the PSCI firmware subsystem" * tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits) ARM: remove check for CONFIG_DEBUG_LL_SER3 firmware/psci: Add debugfs support to ease debugging firmware/psci: Print a warning if PSCI doesn't accept PC mode dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support soc: sunxi: sram: Add support for the D1 system control soc: sunxi: sram: Export the LDO control register soc: sunxi: sram: Save a pointer to the OF match data soc: sunxi: sram: Return void from the release function soc: apple: rtkit: Add apple_rtkit_poll soc: imx: add i.MX93 media blk ctrl driver soc: imx: add i.MX93 SRC power domain driver soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl soc: imx: add icc paths for i.MX8MP media blk ctrl ...
2022-09-28firmware/psci: Print a warning if PSCI doesn't accept PC modeDmitry Baryshkov1-3/+1
The function psci_pd_try_set_osi_mode() will print an error if enabling OSI mode fails. To ease debugging PSCI issues print corresponding message if switching to PC mode fails too. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20220926110249.666813-1-dmitry.baryshkov@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-23cpuidle: riscv-sbi: Fix CPU_PM_CPU_IDLE_ENTER_xyz() macro usageAnup Patel1-1/+6
Currently, we are using CPU_PM_CPU_IDLE_ENTER_PARAM() for all SBI HSM suspend types so retentive suspend types are also treated non-retentive and kernel will do redundant additional work for these states. The BIT[31] of SBI HSM suspend types allows us to differentiate between retentive and non-retentive suspend types so we should use this BIT to call appropriate CPU_PM_CPU_IDLE_ENTER_xyz() macro. Fixes: 6abf32f1d9c5 ("cpuidle: Add RISC-V SBI CPU idle driver") Signed-off-by: Anup Patel <apatel@ventanamicro.com> Link: https://lore.kernel.org/r/20220718084553.2056169-1-apatel@ventanamicro.com/ Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-09-03cpuidle: Remove redundant check in cpuidle_switch_governor()Yu Liao1-6/+5
gov has already been NULL checked at the beginning of cpuidle_switch_governor, so remove redundant check. While at it, use pr_info() instead printk() to address the following checkpatch warning: WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... Signed-off-by: Yu Liao <liaoyu15@huawei.com> [ rjw: Subject and changelog edits, added empty line after if () ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-31cpuidle: powernv: move from strlcpy() with unused retval to strscpy()Wolfram Sang1-2/+2
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-31cpuidle: coupled: Drop duplicate word from a commentJason Wang1-1/+1
The double `are' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> [ rjw: New subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-09Merge tag 'pm-5.20-rc1-2' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are ARM cpufreq updates and operating performance points (OPP) updates plus one cpuidle update adding a new trace point. Specifics: - Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang). - Minor cleanups and support for new boards for Qcom cpufreq drivers (Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang). - Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar). - Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh Kumar). - Add dev_pm_opp_set_config() and friends and migrate other users and helpers to using them (Viresh Kumar). - Add support for multiple clocks for a device (Viresh Kumar and Krzysztof Kozlowski). - Configure resources before adding OPP table for Venus (Stanimir Varbanov). - Keep reference count up for opp->np and opp_table->np while they are still in use (Liang He). - Minor OPP cleanups (Viresh Kumar and Yang Li). - Add a trace event for cpuidle to track missed (too deep or too shallow) wakeups (Kajetan Puchalski)" * tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits) cpuidle: Add cpu_idle_miss trace event venus: pm_helpers: Fix warning in OPP during probe OPP: Don't drop opp->np reference while it is still in use OPP: Don't drop opp_table->np reference while it is still in use cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible dt-bindings: opp: Add msm8939 to the compatible list dt-bindings: opp: Add missing compat devices dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks cpufreq: Change order of online() CB and policy->cpus modification cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call cpufreq: qcom-hw: Disable LMH irq when disabling policy cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init() OPP: Remove dev{m}_pm_opp_of_add_table_noclk() PM / devfreq: tegra30: Register config_clks helper OPP: Allow config_clks helper for single clk case OPP: Provide a simple implementation to configure multiple clocks OPP: Assert clk_count == 1 for single clk helpers ...
2022-08-04Merge tag 'spdx-6.0-rc1' of ↵Linus Torvalds2-8/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...
2022-08-03cpuidle: Add cpu_idle_miss trace eventKajetan Puchalski1-1/+5
Add a trace event for cpuidle to track missed (too deep or too shallow) wakeups. After each wakeup, CPUIdle already computes whether the entered state was optimal, above or below the desired one and updates the relevant counters. This patch makes it possible to trace those events in addition to just reading the counters. The patterns of types and percentages of misses across different workloads appear to be very consistent. This makes the trace event very useful for comparing the relative correctness of different CPUIdle governors for different types of workloads, or for finding the optimal governor for a given device. Signed-off-by: Kajetan Puchalski <kajetan.puchalski@arm.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-03Merge tag 'rcu.2022.07.26a' of ↵Linus Torvalds3-12/+13
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes - Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms - Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods - Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead - Torture-test updates - Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y * tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits) rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings rcu: Diagnose extended sync_rcu_do_polled_gp() loops rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings rcutorture: Test polled expedited grace-period primitives rcu: Add polled expedited grace-period primitives rcutorture: Verify that polled GP API sees synchronous grace periods rcu: Make Tiny RCU grace periods visible to polled APIs rcu: Make polled grace-period API account for expedited grace periods rcu: Switch polled grace-period APIs to ->gp_seq_polled rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty rcu/nocb: Add option to opt rcuo kthreads out of RT priority rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread() rcu/nocb: Add an option to offload all CPUs on boot rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order rcu/nocb: Add/del rdp to iterate from rcuog itself rcu/tree: Add comment to describe GP-done condition in fqs loop rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs() rcu/kvfree: Remove useless monitor_todo flag rcu: Cleanup RCU urgency state for offline CPU ...
2022-08-02Merge tag 'pm-5.20-rc1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These are mostly minor improvements all over including new CPU IDs for the Intel RAPL driver, an Energy Model rework to use micro-Watt as the power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq updates, documentation cleanups and a new version of the pm-graph suite of utilities. Specifics: - Make cpufreq_show_cpus() more straightforward (Viresh Kumar). - Drop unnecessary CPU hotplug locking from store() used by cpufreq sysfs attributes (Viresh Kumar). - Make the ACPI cpufreq driver support the boost control interface on Zhaoxin/Centaur processors (Tony W Wang-oc). - Print a warning message on attempts to free an active cpufreq policy which should never happen (Viresh Kumar). - Fix grammar in the Kconfig help text for the loongson2 cpufreq driver (Randy Dunlap). - Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq governor (Zhao Liu). - Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll cpuidle driver (Eiichi Tsukata). - Modify intel_idle to treat C1 and C1E as independent idle states on Sapphire Rapids (Artem Bityutskiy). - Extend support for wakeirq to callback wrappers used during system suspend and resume (Ulf Hansson). - Defer waiting for device probe before loading a hibernation image till the first actual device access to avoid possible deadlocks reported by syzbot (Tetsuo Handa). - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn Helgaas). - Add Raptor Lake-P to the list of processors supported by the Intel RAPL driver (George D Sworo). - Add Alder Lake-N and Raptor Lake-P to the list of processors for which Power Limit4 is supported in the Intel RAPL driver (Sumeet Pawnikar). - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before attempting to remove it (Hsin-Yi Wang). - Change the Energy Model code to represent power in micro-Watts and adjust its users accordingly (Lukasz Luba). - Add new devfreq driver for Mediatek CCI (Cache Coherent Interconnect) (Johnson Wang). - Convert the Samsung Exynos SoC Bus bindings to DT schema of exynos-bus.c (Krzysztof Kozlowski). - Address kernel-doc warnings by adding the description for unused function parameters in devfreq core (Mauro Carvalho Chehab). - Use NULL to pass a null pointer rather than zero according to the function propotype in imx-bus.c (Colin Ian King). - Print error message instead of error interger value in tegra30-devfreq.c (Dmitry Osipenko). - Add checks to prevent setting negative frequency QoS limits for CPUs (Shivnandan Kumar). - Update the pm-graph suite of utilities to the latest revision 5.9 including multiple improvements (Todd Brandt). - Drop pme_interrupt reference from the PCI power management documentation (Mario Limonciello)" * tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits) powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P PM: QoS: Add check to make sure CPU freq is non-negative PM: hibernate: defer device probing when resuming from hibernation intel_idle: make SPR C1 and C1E be independent cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask cpufreq: loongson2: fix Kconfig "its" grammar pm-graph v5.9 cpufreq: Warn users while freeing active policy cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1 firmware: arm_scmi: Get detailed power scale from perf Documentation: EM: Switch to micro-Watts scale PM: EM: convert power field to micro-Watts precision and align drivers PM / devfreq: tegra30: Add error message for devm_devfreq_add_device() PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero PM / devfreq: shut up kernel-doc warnings dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver dt-bindings: interconnect: Add MediaTek CCI dt-bindings PM: domains: Ensure genpd_debugfs_dir exists before remove PM: runtime: Extend support for wakeirq for force_suspend|resume ...
2022-07-05context_tracking: Take IRQ eqs entrypoints over RCUFrederic Weisbecker2-8/+8
The RCU dynticks counter is going to be merged into the context tracking subsystem. Prepare with moving the IRQ extended quiescent states entrypoints to context tracking. For now those are dumb redirection to existing RCU calls. [ paulmck: Apply Stephen Rothwell feedback from -next. ] [ paulmck: Apply Nathan Chancellor feedback. ] Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Uladzislau Rezki <uladzislau.rezki@sony.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: Yu Liao <liaoyu15@huawei.com> Cc: Phil Auld <pauld@redhat.com> Cc: Paul Gortmaker<paul.gortmaker@windriver.com> Cc: Alex Belits <abelits@marvell.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-07-05context_tracking: Take idle eqs entrypoints over RCUFrederic Weisbecker1-4/+5
The RCU dynticks counter is going to be merged into the context tracking subsystem. Start with moving the idle extended quiescent states entrypoints to context tracking. For now those are dumb redirections to existing RCU calls. [ paulmck: Apply kernel test robot feedback. ] Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Uladzislau Rezki <uladzislau.rezki@sony.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: Yu Liao <liaoyu15@huawei.com> Cc: Phil Auld <pauld@redhat.com> Cc: Paul Gortmaker<paul.gortmaker@windriver.com> Cc: Alex Belits <abelits@marvell.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-06-23cpuidle: cpuidle-arm: remove arm64 supportMichael Walle1-1/+2
Since commit 788961462f34 ("ARM: psci: cpuidle: Enable PSCI CPUidle driver") the generic ARM cpuidle driver doesn't probe anymore because arm_cpuidle_init() will always return -EOPNOTSUPP. That is, because the mentioned commit removes the only .cpu_suspend and .cpu_init_idle provider. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20220529181329.2345722-2-michael@walle.cc Signed-off-by: Will Deacon <will@kernel.org>
2022-06-14cpuidle: haltpoll: Add trace points for guest_halt_poll_ns grow/shrinkEiichi Tsukata1-0/+3
Add trace points as are implemented in KVM host halt polling. This helps tune guest halt polling params. Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE ↵Thomas Gleixner2-8/+2
(part 2) Based on the normalized pattern: this file is licensed under the terms of the gnu general public license version 2 this program is licensed as is without any warranty of any kind whether express or implied extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-23Merge branches 'pm-em' and 'pm-cpuidle'Rafael J. Wysocki2-4/+4
Marge Energy Model support updates and cpuidle updates for 5.19-rc1: - Update the Energy Model support code to allow the Energy Model to be artificial, which means that the power values may not be on a uniform scale with other devices providing power information, and update the cpufreq_cooling and devfreq_cooling thermal drivers to support artificial Energy Models (Lukasz Luba). - Make DTPM check the Energy Model type (Lukasz Luba). - Fix policy counter decrementation in cpufreq if Energy Model is in use (Pierre Gondois). - Add AlderLake processor support to the intel_idle driver (Zhang Rui). - Fix regression leading to no genpd governor in the PSCI cpuidle driver and fix the riscv-sbi cpuidle driver to allow a genpd governor to be used (Ulf Hansson). * pm-em: PM: EM: Decrement policy counter powercap: DTPM: Check for Energy Model type thermal: cooling: Check Energy Model type in cpufreq_cooling and devfreq_cooling Documentation: EM: Add artificial EM registration description PM: EM: Remove old debugfs files and print all 'flags' PM: EM: Change the order of arguments in the .active_power() callback PM: EM: Use the new .get_cost() callback while registering EM PM: EM: Add artificial EM flag PM: EM: Add .get_cost() callback * pm-cpuidle: cpuidle: riscv-sbi: Fix code to allow a genpd governor to be used cpuidle: psci: Fix regression leading to no genpd governor intel_idle: Add AlderLake support
2022-05-23Merge branches 'pm-core', 'pm-sleep' and 'powercap'Rafael J. Wysocki1-0/+46
Merge PM core changes, updates related to system sleep and power capping updates for 5.19-rc1: - Export dev_pm_ops instead of suspend() and resume() in the IIO chemical scd30 driver (Jonathan Cameron). - Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and PM-runtime counterparts (Jonathan Cameron). - Move symbol exports in the IIO chemical scd30 driver into the IIO_SCD30 namespace (Jonathan Cameron). - Avoid device PM-runtime usage count underflows (Rafael Wysocki). - Allow dynamic debug to control printing of PM messages (David Cohen). - Fix some kernel-doc comments in hibernation code (Yang Li, Haowen Bai). - Preserve ACPI-table override during hibernation (Amadeusz Sławiński). - Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson). - Make Intel RAPL power capping driver support the RaptorLake and AlderLake N processors (Zhang Rui, Sumeet Pawnikar). - Remove redundant store to value after multiply in the RAPL power capping driver (Colin Ian King). * pm-core: PM: runtime: Avoid device usage count underflows iio: chemical: scd30: Move symbol exports into IIO_SCD30 namespace PM: core: Add NS varients of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and runtime pm equiv iio: chemical: scd30: Export dev_pm_ops instead of suspend() and resume() * pm-sleep: cpuidle: PSCI: Improve support for suspend-to-RAM for PSCI OSI mode PM: runtime: Allow to call __pm_runtime_set_status() from atomic context PM: hibernate: Don't mark comment as kernel-doc x86/ACPI: Preserve ACPI-table override during hibernation PM: hibernate: Fix some kernel-doc comments PM: sleep: enable dynamic debug support within pm_pr_dbg() PM: sleep: Narrow down -DDEBUG on kernel/power/ files * powercap: powercap: intel_rapl: remove redundant store to value after multiply powercap: intel_rapl: add support for ALDERLAKE_N powercap: RAPL: Add Power Limit4 support for RaptorLake powercap: intel_rapl: add support for RaptorLake
2022-05-19cpuidle: riscv-sbi: Fix code to allow a genpd governor to be usedUlf Hansson1-2/+2
The intent is to use a genpd governor when there are some states that needs to be managed. Although, the current code ends up to never assign a governor, let's fix this. Fixes: 6abf32f1d9c50 ("cpuidle: Add RISC-V SBI CPU idle driver") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Anup Patel <anup@brainfault.org> Tested-by: Anup Patel <anup@brainfault.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-19cpuidle: psci: Fix regression leading to no genpd governorUlf Hansson1-2/+2
While factoring out the PM domain related code from PSCI domain driver into a set of library functions, a regression when initializing the genpds got introduced. More precisely, we fail to assign a genpd governor, so let's fix this. Fixes: 9d976d6721df ("cpuidle: Factor-out power domain related code from PSCI domain driver") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-20cpuidle: riscv: support non-SMP configRandy Dunlap1-0/+1
Add <asm/smp.h> for cpuid_to_hartid_map etc. This is needed for both SMP and non-SMP builds, but not having it causes a build error for non-SMP: drivers/cpuidle/cpuidle-riscv-sbi.c: In function 'sbi_cpuidle_init_cpu': drivers/cpuidle/cpuidle-riscv-sbi.c:350:26: error: implicit declaration of function 'cpuid_to_hartid_map' [-Werror=implicit-function-declaration] Fixes: 6abf32f1d9c5 ("cpuidle: Add RISC-V SBI CPU idle driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-04-19cpuidle: PSCI: Improve support for suspend-to-RAM for PSCI OSI modeUlf Hansson1-0/+46
When PSCI OSI mode is supported the syscore flag is set for the CPU devices that becomes attached to their PM domains (genpds). In the suspend-to-idle case, we call dev_pm_genpd_suspend|resume() to allow genpd to properly manage the power-off/on operations (pick an idlestate and manage the on/off notifications). For suspend-to-ram, dev_pm_genpd_suspend|resume() is currently not being called, which causes a problem that the genpd on/off notifiers do not get sent as expected. This prevents the platform-specific operations from being executed, typically needed just before/after the boot CPU is being turned off/on. To deal with this problem, let's register a syscore ops for cpuidle-psci when PSCI OSI mode is being used and call dev_pm_genpd_suspend|resume() from them. In this way, genpd regains control of the PM domain topology and then sends the on/off notifications when it's appropriate. Reported-by: Maulik Shah <quic_mkshah@quicinc.com> Suggested-by: Maulik Shah <quic_mkshah@quicinc.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Maulik Shah <quic_mkshah@quicinc.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-31RISC-V CPU Idle SupportPalmer Dabbelt9-135/+903
This series adds RISC-V CPU Idle support using SBI HSM suspend function. The RISC-V SBI CPU idle driver added by this series is highly inspired from the ARM PSCI CPU idle driver. Special thanks Sandeep Tripathy for providing early feeback on SBI HSM support in all above projects (RISC-V SBI specification, OpenSBI, and Linux RISC-V). * palmer/riscv-idle: RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine dt-bindings: Add common bindings for ARM and RISC-V idle states cpuidle: Add RISC-V SBI CPU idle driver cpuidle: Factor-out power domain related code from PSCI domain driver RISC-V: Add SBI HSM suspend related defines RISC-V: Add arch functions for non-retentive suspend entry/exit RISC-V: Rename relocate() and make it global RISC-V: Enable CPU_IDLE drivers
2022-03-24Merge tag 'arm-drivers-5.18' of ↵Linus Torvalds1-4/+24
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "There are a few separately maintained driver subsystems that we merge through the SoC tree, notable changes are: - Memory controller updates, mainly for Tegra and Mediatek SoCs, and clarifications for the memory controller DT bindings - SCMI firmware interface updates, in particular a new transport based on OPTEE and support for atomic operations. - Cleanups to the TEE subsystem, refactoring its memory management For SoC specific drivers without a separate subsystem, changes include - Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP Layerscape SoCs. - Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L, and Qualcomm SM8450. - Better power management on Mediatek MT81xx, NXP i.MX8MQ and older NVIDIA Tegra chips" * tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits) ARM: spear: fix typos in comments soc/microchip: fix invalid free in mpfs_sys_controller_delete soc: s4: Add support for power domains controller dt-bindings: power: add Amlogic s4 power domains bindings ARM: at91: add support in soc driver for new SAMA5D29 soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC memory: emif: check the pointer temp in get_device_details() memory: emif: Add check for setup_interrupts dt-bindings: arm: mediatek: mmsys: add support for MT8186 dt-bindings: mediatek: add compatible for MT8186 pwrap soc: mediatek: pwrap: add pwrap driver for MT8186 SoC soc: mediatek: mmsys: add mmsys reset control for MT8186 soc: mediatek: mtk-infracfg: Disable ACP on MT8192 soc: ti: k3-socinfo: Add AM62x JTAG ID soc: mediatek: add MTK mutex support for MT8186 soc: mediatek: mmsys: add mt8186 mmsys routing table soc: mediatek: pm-domains: Add support for mt8186 dt-bindings: power: Add MT8186 power domains soc: mediatek: pm-domains: Add support for mt8195 ...
2022-03-10cpuidle: Add RISC-V SBI CPU idle driverAnup Patel4-0/+651
The RISC-V SBI HSM extension provides HSM suspend call which can be used by Linux RISC-V to enter platform specific low-power state. This patch adds a CPU idle driver based on RISC-V SBI calls which will populate idle states from device tree and use SBI calls to entry these idle states. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Acked-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-03-10cpuidle: Factor-out power domain related code from PSCI domain driverAnup Patel7-135/+252
The generic power domain related code in PSCI domain driver is largely independent of PSCI and can be shared with RISC-V SBI domain driver hence we factor-out this code into dt_idle_genpd.c and dt_idle_genpd.h. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-03-09cpuidle: haltpoll: Call cpuidle_poll_state_init() laterLi RongQing1-2/+2
Call cpuidle_poll_state_init() only if it is needed to avoid doing useless work. Signed-off-by: Li RongQing <lirongqing@baidu.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-04firmware: qcom: scm: Drop cpumask parameter from set_boot_addr()Stephan Gerhold1-4/+4
qcom_scm_set_cold/warm_boot_addr() currently take a cpumask parameter, but it's not very useful because at the end we always set the same entry address for all CPUs. This also allows speeding up probe of cpuidle-qcom-spm a bit because only one SCM call needs to be made to the TrustZone firmware, instead of one per CPU. The main reason for this change is that it allows implementing the "multi-cluster" variant of the set_boot_addr() call more easily without having to rely on functions that break in certain build configurations or that are not exported to modules. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211201130505.257379-4-stephan@gerhold.net
2022-02-04cpuidle: qcom-spm: Check if any CPU is managed by SPMStephan Gerhold1-0/+20
At the moment, the "qcom-spm-cpuidle" platform device is always created, even if none of the CPUs is actually managed by the SPM. On non-qcom platforms this will result in infinite probe-deferral due to the failing qcom_scm_is_available() call. To avoid this, look through the CPU DT nodes and check if there is actually any CPU managed by a SPM (as indicated by the qcom,saw property). It should also be available because e.g. MSM8916 has qcom,saw defined but it's typically not enabled with ARM64/PSCI firmwares. This is needed in preparation of a follow-up change that calls qcom_scm_set_warm_boot_addr() a single time before registering any cpuidle drivers. Otherwise this call might be made even on devices that have this driver enabled but actually make use of PSCI. Fixes: 60f3692b5f0b ("cpuidle: qcom_spm: Detach state machine from main SPM handling") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/86e3e09f-a8d7-3dff-3fc6-ddd7d30c5d78@samsung.com/ Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211201130505.257379-2-stephan@gerhold.net
2022-01-05cpuidle: use default_groups in kobj_typeGreg Kroah-Hartman1-2/+4
There are currently 2 ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the cpuidle sysfs code to use default_groups field which has been the preferred way since aa30f47cf666 ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-17cpuidle: Fix cpuidle_remove_state_sysfs() kerneldoc commentYang Li1-1/+1
Fix function name in sysfs.c kernel-doc comment to remove a warning found by running scripts/kernel-doc, which is caused by using 'make W=1'. drivers/cpuidle/sysfs.c:512: warning: expecting prototype for cpuidle_remove_driver_sysfs(). Prototype was for cpuidle_remove_state_sysfs() instead Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-24cpuidle: menu: Fix typo in a commentJason Wang1-1/+1
The word `these' in a comment is repeated, so drop one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-04Merge tag 'drivers-5.16' of ↵Linus Torvalds3-251/+73
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "These are all the driver updates for SoC specific drivers. There are a couple of subsystems with individual maintainers picking up their patches here: - The reset controller subsystem add support for a few new SoC variants to existing drivers, along with other minor improvements - The OP-TEE subsystem gets a driver for the ARM FF-A transport - The memory controller subsystem has improvements for Tegra, Mediatek, Renesas, Freescale and Broadcom specific drivers. - The tegra cpuidle driver changes get merged through this tree this time. There are only minor changes, but they depend on other tegra driver updates here. - The ep93xx platform finally moves to using the drivers/clk/ subsystem, moving the code out of arch/arm in the process. This depends on a small sound driver change that is included here as well. - There are some minor updates for Qualcomm and Tegra specific firmware drivers. The other driver updates are mainly for drivers/soc, which contains a mixture of vendor specific drivers that don't really fit elsewhere: - Mediatek drivers gain more support for MT8192, with new support for hw-mutex and mmsys routing, plus support for reset lines in the mmsys driver. - Qualcomm gains a new "sleep stats" driver, and support for the "Generic Packet Router" in the APR driver. - There is a new user interface for routing the UARTS on ASpeed BMCs, something that apparently nobody else has needed so far. - More drivers can now be built as loadable modules, in particular for Broadcom and Samsung platforms. - Lots of improvements to the TI sysc driver for better suspend/resume support" Finally, there are lots of minor cleanups and new device IDs for amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape, allwinner, broadcom, and omap" * tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits) optee: Fix spelling mistake "reclain" -> "reclaim" Revert "firmware: qcom: scm: Add support for MC boot address API" qcom: spm: allow compile-testing firmware: arm_ffa: Remove unused 'compat_version' variable soc: samsung: exynos-chipid: add exynosautov9 SoC support firmware: qcom: scm: Don't break compile test on non-ARM platforms soc: qcom: smp2p: Add of_node_put() before goto soc: qcom: apr: Add of_node_put() before return soc: qcom: qcom_stats: Fix client votes offset soc: qcom: rpmhpd: fix sm8350_mxc's peer domain dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226 firmware: qcom: scm: Add support for MC boot address API soc: qcom: spm: Add 8916 SPM register data dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu soc: qcom: socinfo: Add PM8150C and SMB2351 models firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available() soc: aspeed: Add UART routing support soc: fsl: dpio: rename the enqueue descriptor variable soc: fsl: dpio: use an explicit NULL instead of 0 ...
2021-10-13Merge tag 'qcom-drivers-for-5.16' of ↵Arnd Bergmann2-250/+69
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.16 This drops the use of power-domains for exposing the load_state from the QMP driver to clients, to avoid issues related to system suspend. SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up Linux from suspend to perform recovery. It adds RPM power-domain support for SM6350 and MSM8953 and base RPM support for MSM8953 and QCM2290. It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which will enable the introduction of proper voltage scaling of the CPU subsystem. Support for releasing secondary CPUs on MSM8226 is introduced. The Asynchronous Packet Router (APR) driver is extended to support the new Generic Packet Router (GPR) variant, which is used to communicate with the firmware in the new AudioReach audio driver. Lastly it transitions a number of drivers to safer string functions, as well as switching things to use devm_platform_ioremap_resource(). * tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits) soc: qcom: apr: Add GPR support soc: dt-bindings: qcom: add gpr bindings soc: qcom: apr: make code more reuseable soc: dt-bindings: qcom: apr: deprecate qcom,apr-domain property soc: dt-bindings: qcom: apr: convert to yaml dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions dt-bindings: msm/dp: Remove aoss-qmp header soc: qcom: aoss: Drop power domain support dt-bindings: soc: qcom: aoss: Drop the load state power-domain soc: qcom: smp2p: Add wakeup capability to SMP2P IRQ dt-bindings: power: rpmpd: Add SM6350 to rpmpd binding dt-bindings: soc: qcom: aoss: Add SM6350 compatible soc: qcom: llcc: Disable MMUHWT retention soc: qcom: smd-rpm: Add QCM2290 compatible dt-bindings: soc: qcom: smd-rpm: Add QCM2290 compatible firmware: qcom_scm: Add compatible for MSM8953 SoC dt-bindings: firmware: qcom-scm: Document msm8953 bindings soc: qcom: pdr: Prefer strscpy over strcpy soc: qcom: rpmh-rsc: Make use of the helper function devm_platform_ioremap_resource_byname() soc: qcom: gsbi: Make use of the helper function devm_platform_ioremap_resource() ... Link: https://lore.kernel.org/r/20211012173442.1017010-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-05cpuidle: tegra: Check whether PMC is readyDmitry Osipenko1-0/+3
Check whether PMC is ready before proceeding with the cpuidle registration. This fixes racing with the PMC driver probe order, which results in a disabled deepest CC6 idling state if cpuidle driver is probed before the PMC. Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-10-05cpuidle: tegra: Enable compile testingDmitry Osipenko1-1/+1
Enable compile testing of tegra-cpuidle driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-10-01cpuidle: Fix kobject memory leaks in error pathsAnel Orazgaliyeva1-1/+4
Commit c343bf1ba5ef ("cpuidle: Fix three reference count leaks") fixes the cleanup of kobjects; however, it removes kfree() calls altogether, leading to memory leaks. Fix those and also defer the initialization of dev->kobj_dev until after the error check, so that we do not end up with a dangling pointer. Fixes: c343bf1ba5ef ("cpuidle: Fix three reference count leaks") Signed-off-by: Anel Orazgaliyeva <anelkz@amazon.de> Suggested-by: Aman Priyadarshi <apeureka@amazon.de> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-09-22cpuidle: qcom_spm: Detach state machine from main SPM handlingAngeloGioacchino Del Regno2-250/+69
In commit a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver") the SPM driver has been converted to a generic CPUidle driver: that was mainly made to simplify the driver and that was a great accomplishment; Though, at that time, this driver was only applicable to ARM 32-bit SoCs, lacking logic about the handling of newer generation SAW. In preparation for the enablement of SPM features on AArch64/ARM64, split the cpuidle-qcom-spm driver in two: the CPUIdle related state machine (currently used only on ARM SoCs) stays there, while the SPM communication handling lands back in soc/qcom/spm.c and also making sure to not discard the simplifications that were introduced in the aforementioned commit. Since now the "two drivers" are split, the SCM dependency in the main SPM handling is gone and for this reason it was also possible to move the SPM initialization early: this will also make sure that whenever the SAW CPUIdle driver is getting initialized, the SPM driver will be ready to do the job. Please note that the anticipation of the SPM initialization was also done to optimize the boot times on platforms that have their CPU/L2 idle states managed by other means (such as PSCI), while needing SAW initialization for other purposes, like AVS control. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210729155609.608159-2-angelogioacchino.delregno@somainline.org
2021-09-07Merge tag 'mfd-next-5.15' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Add support for registering devices via MFD cells to Simple MFD (I2C) New Drivers: - Add support for Renesas Synchronization Management Unit (SMU) New Device Support: - Add support for N5010 to Intel M10 BMC - Add support for Cannon Lake to Intel LPSS ACPI - Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family - Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86 New Functionality: - Add support for GPIO to Intel LPC ICH - Add support for Reset to Texas Instruments TPS65086 Fix-ups: - Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86 - Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru - Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq - Pass 'supplied-from' property through axp288_fuel_gauge via swnode - Remove unused file entry; MAINTAINERS - Make interrupt line optional; tps65086 - Rename db8500-cpuidle driver symbol; db8500-prcmu - Remove support for unused hardware; tqmx86 - Provide a standard LPC clock frequency for unknown boards; tqmx86 - Remove unused code; ti_am335x_tscadc - Use of_iomap() instead of ioremap(); syscon Bug Fixes: - Clear GPIO IRQ resource flags when no IRQ is set; tqmx86 - Fix incorrect/misleading frequencies; db8500-prcmu - Mitigate namespace clash with other GPIOBASE users" * tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (31 commits) mfd: lpc_sch: Rename GPIOBASE to prevent build error mfd: syscon: Use of_iomap() instead of ioremap() dt-bindings: mfd: Add Broadcom CRU mfd: ti_am335x_tscadc: Delete superfluous error message mfd: tqmx86: Assume 24MHz LPC clock for unknown boards mfd: tqmx86: Add support for TQ-Systems DMI IDs mfd: tqmx86: Add support for TQMx110EB and TQMxE40x mfd: tqmx86: Fix typo in "platform" mfd: tqmx86: Remove incorrect TQMx90UC board ID mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set mfd: simple-mfd-i2c: Add support for registering devices via MFD cells mfd/cpuidle: ux500: Rename driver symbol mfd: tps65086: Add cell entry for reset driver mfd: tps65086: Make interrupt line optional dt-bindings: mfd: Convert tps65086.txt to YAML MAINTAINERS: Adjust ARM/NOMADIK/Ux500 ARCHITECTURES to file renaming mfd: db8500-prcmu: Handle missing FW variant mfd: db8500-prcmu: Rename register header mfd: axp20x: Add supplied-from property to axp288_fuel_gauge cell mfd: Don't use irq_create_mapping() to resolve a mapping ...
2021-09-03Merge tag 'powerpc-5.15-1' of ↵Linus Torvalds1-31/+46
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Convert pseries & powernv to use MSI IRQ domains. - Rework the pseries CPU numbering so that CPUs that are removed, and later re-added, are given a CPU number on the same node as previously, when possible. - Add support for a new more flexible device-tree format for specifying NUMA distances. - Convert powerpc to GENERIC_PTDUMP. - Retire sbc8548 and sbc8641d board support. - Various other small features and fixes. Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard, Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas, Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R. Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan Jiabing, Xiongwei Song, and Zheng Yongjun. * tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits) powerpc/bug: Cast to unsigned long before passing to inline asm powerpc/ptdump: Fix generic ptdump for 64-bit KVM: PPC: Fix clearing never mapped TCEs in realmode powerpc/pseries/iommu: Rename "direct window" to "dma window" powerpc/pseries/iommu: Make use of DDW for indirect mapping powerpc/pseries/iommu: Find existing DDW with given property name powerpc/pseries/iommu: Update remove_dma_window() to accept property name powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw() powerpc/pseries/iommu: Allow DDW windows starting at 0x00 powerpc/pseries/iommu: Add ddw_list_new_entry() helper powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper powerpc/kernel/iommu: Add new iommu_table_in_use() helper powerpc/pseries/iommu: Replace hard-coded page shift powerpc/numa: Update cpu_cpu_map on CPU online/offline powerpc/numa: Print debug statements only when required powerpc/numa: convert printk to pr_xxx powerpc/numa: Drop dbg in favour of pr_debug powerpc/smp: Enable CACHE domain for shared processor powerpc/smp: Update cpu_core_map on all PowerPc systems ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-25 14:32:32 +0300