summaryrefslogtreecommitdiff
path: root/drivers/cpuidle
AgeCommit message (Collapse)AuthorFilesLines
2014-04-08Merge branch 'pm-cpuidle'Rafael J. Wysocki1-0/+3
* pm-cpuidle: cpuidle: sysfs: Export target residency information intel_idle: fine-tune IVT residency targets tools/power turbostat: Run on Broadwell tools/power turbostat: simplify output, add Avg_MHz intel_idle: Add CPU model 54 (Atom N2000 series) intel_idle: support Bay Trail intel_idle: allow sparse sub-state numbering, for Bay Trail ACPI idle: permit sparse C-state sub-state numbers
2014-04-08cpuidle: sysfs: Export target residency informationDaniel Lezcano1-0/+3
From user space, there is no way to know the target residency for each idle state. If we want to write tools to measure the accuracy of the idle state selection from the governor, we need this info. As the exit latency is exported through sysfs, exporting the target residency in the same place makes sense. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-06Merge tag 'drivers-3.15' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
2014-04-03Merge branch 'sched-idle-for-linus' of ↵Linus Torvalds1-51/+56
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched/idle changes from Ingo Molnar: "More idle code reorganization, to prepare for more integration. (Sent separately because it depended on pending timer work, which is now upstream)" * 'sched-idle-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/idle: Add more comments to the code sched/idle: Move idle conditions in cpuidle_idle main function sched/idle: Reorganize the idle loop cpuidle/idle: Move the cpuidle_idle_call function to idle.c idle/cpuidle: Split cpuidle_idle_call main function into smaller functions
2014-04-03Merge branch 'powernv-cpuidle' of ↵Linus Torvalds1-10/+92
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc non-virtualized cpuidle from Ben Herrenschmidt: "This is the branch I mentioned in my other pull request which contains our improved cpuidle support for the "powernv" platform (non-virtualized). It adds support for the "fast sleep" feature of the processor which provides higher power savings than our usual "nap" mode but at the cost of losing the timers while asleep, and thus exploits the new timer broadcast framework to work around that limitation. It's based on a tip timer tree that you seem to have already merged" * 'powernv-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: cpuidle/powernv: Parse device tree to setup idle states cpuidle/powernv: Add "Fast-Sleep" CPU idle state powerpc/powernv: Add OPAL call to resync timebase on wakeup powerpc/powernv: Add context management for Fast Sleep powerpc: Split timer_interrupt() into timer handling and interrupt handling routines powerpc: Implement tick broadcast IPI as a fixed IPI message powerpc: Free up the slot of PPC_MSG_CALL_FUNC_SINGLE IPI message
2014-04-02Merge branch 'for-3.15/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull core block layer updates from Jens Axboe: "This is the pull request for the core block IO bits for the 3.15 kernel. It's a smaller round this time, it contains: - Various little blk-mq fixes and additions from Christoph and myself. - Cleanup of the IPI usage from the block layer, and associated helper code. From Frederic Weisbecker and Jan Kara. - Duplicate code cleanup in bio-integrity from Gu Zheng. This will give you a merge conflict, but that should be easy to resolve. - blk-mq notify spinlock fix for RT from Mike Galbraith. - A blktrace partial accounting bug fix from Roman Pen. - Missing REQ_SYNC detection fix for blk-mq from Shaohua Li" * 'for-3.15/core' of git://git.kernel.dk/linux-block: (25 commits) blk-mq: add REQ_SYNC early rt,blk,mq: Make blk_mq_cpu_notify_lock a raw spinlock blk-mq: support partial I/O completions blk-mq: merge blk_mq_insert_request and blk_mq_run_request blk-mq: remove blk_mq_alloc_rq blk-mq: don't dump CPU -> hw queue map on driver load blk-mq: fix wrong usage of hctx->state vs hctx->flags blk-mq: allow blk_mq_init_commands() to return failure block: remove old blk_iopoll_enabled variable blktrace: fix accounting of partially completed requests smp: Rename __smp_call_function_single() to smp_call_function_single_async() smp: Remove wait argument from __smp_call_function_single() watchdog: Simplify a little the IPI call smp: Move __smp_call_function_single() below its safe version smp: Consolidate the various smp_call_function_single() declensions smp: Teach __smp_call_function_single() to check for offline cpus smp: Remove unused list_head from csd smp: Iterate functions through llist_for_each_entry_safe() block: Stop abusing rq->csd.list in blk-softirq block: Remove useless IPI struct initialization ...
2014-04-01Merge tag 'pm+acpi-3.15-rc1' of ↵Linus Torvalds3-33/+47
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "The majority of this material spent some time in linux-next, some of it even several weeks. There are a few relatively fresh commits in it, but they are mostly fixes and simple cleanups. ACPI took the lead this time, both in terms of the number of commits and the number of modified lines of code, cpufreq follows and there are a few changes in the PM core and in cpuidle too. A new feature that already got some LWN.net's attention is the device PM QoS extension allowing latency tolerance requirements to be propagated from leaf devices to their ancestors with hardware interfaces for specifying latency tolerance. That should help systems with hardware-driven power management to avoid going too far with it in cases when there are latency tolerance constraints. There also are some significant changes in the ACPI core related to the way in which hotplug notifications are handled. They affect PCI hotplug (ACPIPHP) and the ACPI dock station code too. The bottom line is that all those notification now go through the root notify handler and are propagated to the interested subsystems by means of callbacks instead of having to install a notify handler for each device object that we can potentially get hotplug notifications for. In addition to that ACPICA will now advertise "Windows 2013" compatibility for _OSI, because some systems out there don't work correctly if that is not done (some of them don't even boot). On the system suspend side of things, all of the device suspend and resume callbacks, except for ->prepare() and ->complete(), are now going to be executed asynchronously as that turns out to speed up system suspend and resume on some platforms quite significantly and we have a few more optimizations in that area. Apart from that, there are some new device IDs and fixes and cleanups all over. In particular, the system suspend and resume handling by cpufreq should be improved and the cpuidle menu governor should be a bit more robust now. Specifics: - Device PM QoS support for latency tolerance constraints on systems with hardware interfaces allowing such constraints to be specified. That is necessary to prevent hardware-driven power management from becoming overly aggressive on some systems and to prevent power management features leading to excessive latencies from being used in some cases. - Consolidation of the handling of ACPI hotplug notifications for device objects. This causes all device hotplug notifications to go through the root notify handler (that was executed for all of them anyway before) that propagates them to individual subsystems, if necessary, by executing callbacks provided by those subsystems (those callbacks are associated with struct acpi_device objects during device enumeration). As a result, the code in question becomes both smaller in size and more straightforward and all of those changes should not affect users. - ACPICA update, including fixes related to the handling of _PRT in cases when it is broken and the addition of "Windows 2013" to the list of supported "features" for _OSI (which is necessary to support systems that work incorrectly or don't even boot without it). Changes from Bob Moore and Lv Zheng. - Consolidation of ACPI _OST handling from Jiang Liu. - ACPI battery and AC fixes allowing unusual system configurations to be handled by that code from Alexander Mezin. - New device IDs for the ACPI LPSS driver from Chiau Ee Chew. - ACPI fan and thermal optimizations related to system suspend and resume from Aaron Lu. - Cleanups related to ACPI video from Jean Delvare. - Assorted ACPI fixes and cleanups from Al Stone, Hanjun Guo, Lan Tianyu, Paul Bolle, Tomasz Nowicki. - Intel RAPL (Running Average Power Limits) driver cleanups from Jacob Pan. - intel_pstate fixes and cleanups from Dirk Brandewie. - cpufreq fixes related to system suspend/resume handling from Viresh Kumar. - cpufreq core fixes and cleanups from Viresh Kumar, Stratos Karafotis, Saravana Kannan, Rashika Kheria, Joe Perches. - cpufreq drivers updates from Viresh Kumar, Zhuoyu Zhang, Rob Herring. - cpuidle fixes related to the menu governor from Tuukka Tikkanen. - cpuidle fix related to coupled CPUs handling from Paul Burton. - Asynchronous execution of all device suspend and resume callbacks, except for ->prepare and ->complete, during system suspend and resume from Chuansheng Liu. - Delayed resuming of runtime-suspended devices during system suspend for the PCI bus type and ACPI PM domain. - New set of PM helper routines to allow device runtime PM callbacks to be used during system suspend and resume more easily from Ulf Hansson. - Assorted fixes and cleanups in the PM core from Geert Uytterhoeven, Prabhakar Lad, Philipp Zabel, Rashika Kheria, Sebastian Capella. - devfreq fix from Saravana Kannan" * tag 'pm+acpi-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits) PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugs PM / sleep: Correct whitespace errors in <linux/pm.h> intel_pstate: Set core to min P state during core offline cpufreq: Add stop CPU callback to cpufreq_driver interface cpufreq: Remove unnecessary braces cpufreq: Fix checkpatch errors and warnings cpufreq: powerpc: add cpufreq transition latency for FSL e500mc SoCs MAINTAINERS: Reorder maintainer addresses for PM and ACPI PM / Runtime: Update runtime_idle() documentation for return value meaning video / output: Drop display output class support fujitsu-laptop: Drop unneeded include acer-wmi: Stop selecting VIDEO_OUTPUT_CONTROL ACPI / gpu / drm: Stop selecting VIDEO_OUTPUT_CONTROL ACPI / video: fix ACPI_VIDEO dependencies cpufreq: remove unused notifier: CPUFREQ_{SUSPENDCHANGE|RESUMECHANGE} cpufreq: Do not allow ->setpolicy drivers to provide ->target cpufreq: arm_big_little: set 'physical_cluster' for each CPU cpufreq: arm_big_little: make vexpress driver depend on bL core driver ACPI / button: Add ACPI Button event via netlink routine ACPI: Remove duplicate definitions of PREFIX ...
2014-04-01Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes from Thomas Gleixner: "This assorted collection provides: - A new timer based timer broadcast feature for systems which do not provide a global accessible timer device. That allows those systems to put CPUs into deep idle states where the per cpu timer device stops. - A few NOHZ_FULL related improvements to the timer wheel - The usual updates to timer devices found in ARM SoCs - Small improvements and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) tick: Remove code duplication in tick_handle_periodic() tick: Fix spelling mistake in tick_handle_periodic() x86: hpet: Use proper destructor for delayed work workqueue: Provide destroy_delayed_work_on_stack() clocksource: CMT, MTU2, TMU and STI should depend on GENERIC_CLOCKEVENTS timer: Remove code redundancy while calling get_nohz_timer_target() hrtimer: Rearrange comments in the order struct members are declared timer: Use variable head instead of &work_list in __run_timers() clocksource: exynos_mct: silence a static checker warning arm: zynq: Add support for cpufreq arm: zynq: Don't use arm_global_timer with cpufreq clocksource/cadence_ttc: Overhaul clocksource frequency adjustment clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled clocksource: Add Kconfig entries for CMT, MTU2, TMU and STI sh: Remove Kconfig entries for TMU, CMT and MTU2 ARM: shmobile: Remove CMT, TMU and STI Kconfig entries clocksource: armada-370-xp: Use atomic access for shared registers clocksource: orion: Use atomic access for shared registers clocksource: timer-keystone: Delete unnecessary variable clocksource: timer-keystone: introduce clocksource driver for Keystone ...
2014-03-12cpuidle: delay enabling interrupts until all coupled CPUs leave idlePaul Burton1-1/+2
As described by a comment at the end of cpuidle_enter_state_coupled it can be inefficient for coupled idle states to return with IRQs enabled since they may proceed to service an interrupt instead of clearing the coupled idle state. Until they have finished & cleared the idle state all CPUs coupled with them will spin rather than being able to enter a safe idle state. Commits e1689795a784 "cpuidle: Add common time keeping and irq enabling" and 554c06ba3ee2 "cpuidle: remove en_core_tk_irqen flag" led to the cpuidle_enter_state enabling interrupts for all idle states, including coupled ones, making this inefficiency unavoidable by drivers & the local_irq_enable near the end of cpuidle_enter_state_coupled redundant. This patch avoids enabling interrupts in cpuidle_enter_state after a coupled state has been entered, allowing them to remain disabled until all coupled CPUs have exited the idle state and cpuidle_enter_state_coupled re-enables them. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-11cpuidle/idle: Move the cpuidle_idle_call function to idle.cDaniel Lezcano1-49/+0
The cpuidle_idle_call does nothing more than calling the three individuals function and is no longer used by any arch specific code but only in the cpuidle framework code. We can move this function into the idle task code to ensure better proximity to the scheduler code. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: rjw@rjwysocki.net Cc: preeti@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1393832934-11625-2-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-11idle/cpuidle: Split cpuidle_idle_call main function into smaller functionsDaniel Lezcano1-21/+75
In order to allow better integration between the cpuidle framework and the scheduler, reducing the distance between these two sub-components will facilitate this integration by moving part of the cpuidle code in the idle task file and, because idle.c is in the sched directory, we have access to the scheduler's private structures. This patch splits the cpuidle_idle_call main entry function into 3 calls to a newly added API: 1. select the idle state 2. enter the idle state 3. reflect the idle state The cpuidle_idle_call calls these three functions to implement the main idle entry function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: rjw@rjwysocki.net Cc: preeti@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1393832934-11625-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-07cpuidle: poll state can measure residencytuukka.tikkanen@linaro.org1-1/+1
For some platforms, a poll state is inserted in the cpuidle driver states. The flags for the state do not indicate that timekeeping is not affected. As the state does not do anything apart from calling cpu_relax(), the times returned by ktime_get should remain valid. Add the missing flag. Signed-off-by: Tuukka Tikkanen <tuukka.tikkanen@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-06cpuidle: Move perf multiplier calculation out of the selection looptuukka.tikkanen@linaro.org1-5/+10
The menu governor performance multiplier defines a minimum predicted idle duration to latency ratio. Instead of checking this separately in every iteration of the state selection loop, adjust the overall latency restriction for the whole loop if this restriction is tighter than what is set by the QoS subsystem. The original test s->exit_latency * multiplier > data->predicted_us becomes s->exit_latency > data->predicted_us / multiplier by dividing both sides of the comparison by "multiplier". While division is likely to be several times slower than multiplication, the minor performance hit allows making a generic sleep state selection function based on (sleep duration, maximum latency) tuple. Signed-off-by: Tuukka Tikkanen <tuukka.tikkanen@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-06cpuidle: Do not substract exit latency from assumed sleep lengthtuukka.tikkanen@linaro.org1-18/+26
The menu governor statistics update function tries to determine the amount of time between entry to low power state and the occurrence of the wakeup event. However, the time measured by the framework includes exit latency on top of the desired value. This exit latency is substracted from the measured value to obtain the desired value. When measured value is not available, the menu governor assumes the wakeup was caused by the timer and the time is equal to remaining timer length. No exit latency should be substracted from this value. This patch prevents the erroneous substraction and clarifies the associated comment. It also removes one intermediate variable that serves no purpose. Signed-off-by: Tuukka Tikkanen <tuukka.tikkanen@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-06cpuidle: Ensure menu coefficients stay within domaintuukka.tikkanen@linaro.org1-0/+3
The menu governor uses coefficients as one method of actual idle period length estimation. The coefficients are, as detailed below, multipliers giving expected idle period length from time until next timer expiry. The multipliers are supposed to have domain of (0..1]. The coefficients are fractions where only the numerators are stored and denominators are a shared constant RESOLUTION*DECAY. Since the value of the coefficient should always be greater than 0 and less than or equal to 1, the numerator must have a value greater than 0 and less than or equal to RESOLUTION*DECAY. If the coefficients are updated with measured idle durations exceeding timer length, the multiplier may reach values exceeding unity (i.e. the stored numerator exceeds RESOLUTION*DECAY). This patch ensures that the multipliers are updated with durations capped to timer length. Signed-off-by: Tuukka Tikkanen <tuukka.tikkanen@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-06cpuidle: Use actual state latency in menu governortuukka.tikkanen@linaro.org1-5/+2
Currently menu governor records the exit latency of the state it has chosen for the idle period. The stored latency value is then later used to calculate the actual length of the idle period. This value may however be incorrect, as the entered state may not be the one chosen by the governor. The entered state information is available, so we can use that to obtain the real exit latency. Signed-off-by: Tuukka Tikkanen <tuukka.tikkanen@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-06cpuidle: rename expected_us to next_timer_us in menu governortuukka.tikkanen@linaro.org1-9/+9
The field expected_us is used to store the time remaining until next timer expiry. The name is inaccurate, as we really do not expect all wakeups to be caused by timers. In addition, another field with a very similar name (predicted_us) is used to store the predicted time remaining until any wakeup source being active. This patch renames expected_us to next_timer_us in order to better reflect the contained information. Signed-off-by: Tuukka Tikkanen <tuukka.tikkanen@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-05cpuidle/powernv: Parse device tree to setup idle statesPreeti U Murthy1-17/+65
Add deep idle states such as nap and fast sleep to the cpuidle state table only if they are discovered from the device tree during cpuidle initialization. Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-05cpuidle/powernv: Add "Fast-Sleep" CPU idle statePreeti U Murthy1-0/+34
Fast sleep is one of the deep idle states on Power8 in which local timers of CPUs stop. On PowerPC we do not have an external clock device which can handle wakeup of such CPUs. Now that we have the support in the tick broadcast framework for archs that do not sport such a device and the low level support for fast sleep, enable it in the cpuidle framework on PowerNV. Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-28Merge branch 'timers/core' into sched/idleIngo Molnar1-6/+8
Avoid heavy conflicts caused by WIP patches in drivers/cpuidle/cpuidle.c, by merging these into a single base. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-25smp: Rename __smp_call_function_single() to smp_call_function_single_async()Frederic Weisbecker1-1/+1
The name __smp_call_function_single() doesn't tell much about the properties of this function, especially when compared to smp_call_function_single(). The comments above the implementation are also misleading. The main point of this function is actually not to be able to embed the csd in an object. This is actually a requirement that result from the purpose of this function which is to raise an IPI asynchronously. As such it can be called with interrupts disabled. And this feature comes at the cost of the caller who then needs to serialize the IPIs on this csd. Lets rename the function and enhance the comments so that they reflect these properties. Suggested-by: Christoph Hellwig <hch@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-25smp: Remove wait argument from __smp_call_function_single()Frederic Weisbecker1-1/+1
The main point of calling __smp_call_function_single() is to send an IPI in a pure asynchronous way. By embedding a csd in an object, a caller can send the IPI without waiting for a previous one to complete as is required by smp_call_function_single() for example. As such, sending this kind of IPI can be safe even when irqs are disabled. This flexibility comes at the expense of the caller who then needs to synchronize the csd lifecycle by himself and make sure that IPIs on a single csd are serialized. This is how __smp_call_function_single() works when wait = 0 and this usecase is relevant. Now there don't seem to be any usecase with wait = 1 that can't be covered by smp_call_function_single() instead, which is safer. Lets look at the two possible scenario: 1) The user calls __smp_call_function_single(wait = 1) on a csd embedded in an object. It looks like a nice and convenient pattern at the first sight because we can then retrieve the object from the IPI handler easily. But actually it is a waste of memory space in the object since the csd can be allocated from the stack by smp_call_function_single(wait = 1) and the object can be passed an the IPI argument. Besides that, embedding the csd in an object is more error prone because the caller must take care of the serialization of the IPIs for this csd. 2) The user calls __smp_call_function_single(wait = 1) on a csd that is allocated on the stack. It's ok but smp_call_function_single() can do it as well and it already takes care of the allocation on the stack. Again it's more simple and less error prone. Therefore, using the underscore prepend API version with wait = 1 is a bad pattern and a sign that the caller can do safer and more simple. There was a single user of that which has just been converted. So lets remove this option to discourage further users. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-24drivers: Enable building of Kirkwood drivers for mach-mvebuAndrew Lunn1-1/+1
With the move of kirkwood into mach-mvebu, drivers Kconfig need tweeking to allow the kirkwood specific drivers to be built. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <cooloney@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22cpuidle/powernv: Remove redundant cpuidle_idle_call()Nicolas Pitre1-0/+5
The core idle loop now takes care of it. We need to add the runlatch function calls to the idle routines which was earlier taken care of by the arch specific idle routine. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Reviewed-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-pm@vger.kernel.org Cc: linaro-kernel@lists.linaro.org Link: http://lkml.kernel.org/n/tip-nr4mtbkkzf2oomaj85m24o7c@git.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-12cpuidle/pseries: Fix fallout caused due to cleanup in pseries cpuidle ↵Preeti U Murthy1-0/+1
backend driver Commit d8c6ad3184ca651 ("sched/idle, PPC: Remove redundant cpuidle_idle_call()") reintroduced ppc64_runlatch_off/on() in the pseries cpuidle backend driver. Hence the cleanup caused by the commit "c0c4301c54adde05:pseries/cpuidle: Remove redundant call to ppc64_runlatch_off() in cpu idle routines" in conjuction with the commit d8c6ad3184ca651 causes a build failure. Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/52FAFD2D.2090306@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-11sched/idle, PPC: Remove redundant cpuidle_idle_call()Nicolas Pitre1-0/+5
The core idle loop now takes care of it. However a few things need checking: - Invocation of cpuidle_idle_call() in pseries_lpar_idle() happened through arch_cpu_idle() and was therefore always preceded by a call to ppc64_runlatch_off(). To preserve this property now that cpuidle_idle_call() is invoked directly from core code, a call to ppc64_runlatch_off() has been added to idle_loop_prolog() in platforms/pseries/processor_idle.c. - Similarly, cpuidle_idle_call() was followed by ppc64_runlatch_off() so a call to the later has been added to idle_loop_epilog(). - And since arch_cpu_idle() always made sure to re-enable IRQs if they were not enabled, this is now done in idle_loop_epilog() as well. The above was made in order to keep the execution flow close to the original. I don't know if that was strictly necessary. Someone well aquainted with the platform details might find some room for possible optimizations. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-sh@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: Russell King <linux@arm.linux.org.uk> Cc: linaro-kernel@lists.linaro.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-47o4m03citrfg9y1vxic5asb@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-07cpuidle: Handle clockevents_notify(BROADCAST_ENTER) failurePreeti U Murthy1-6/+8
Some archs set the CPUIDLE_FLAG_TIMER_STOP flag for idle states in which the local timers stop. The cpuidle_idle_call() currently handles such idle states by calling into the broadcast framework so as to wakeup CPUs at their next wakeup event. With the hrtimer mode of broadcast, the BROADCAST_ENTER call into the broadcast frameowork can fail for archs that do not have an external clock device to handle wakeups and the CPU in question has thus to be made the stand by CPU. This patch handles such cases by failing the call into cpuidle so that the arch can take some default action. The arch will certainly not enter a similar idle state because a failed cpuidle call will also implicitly indicate that the broadcast framework has not registered this CPU to be woken up. Hence we are safe if we fail the cpuidle call. In the process move the functions that trace idle statistics just before and after the entry and exit into idle states respectively. In other scenarios where the call to cpuidle fails, we end up not tracing idle entry and exit since a decision on an idle state could not be taken. Similarly when the call to broadcast framework fails, we skip tracing idle statistics because we are in no further position to take a decision on an alternative idle state to enter into. Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: deepthi@linux.vnet.ibm.com Cc: paulmck@linux.vnet.ibm.com Cc: fweisbec@gmail.com Cc: paulus@samba.org Cc: srivatsa.bhat@linux.vnet.ibm.com Cc: svaidy@linux.vnet.ibm.com Cc: peterz@infradead.org Cc: benh@kernel.crashing.org Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20140207080652.17187.66344.stgit@preeti.in.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-01-29powerpc/powernv/cpuidle: Back-end cpuidle driver for powernv platform.Deepthi Dharwar3-0/+179
Following patch ports the cpuidle framework for powernv platform and also implements a cpuidle back-end powernv idle driver calling on to power7_nap and snooze idle states. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29powerpc/pseries/cpuidle: smt-snooze-delay cleanup.Deepthi Dharwar1-17/+0
smt-snooze-delay was designed to disable NAP state or delay the entry to the NAP state prior to adoption of cpuidle framework. This is per-cpu variable. With the coming of CPUIDLE framework, states can be disabled on per-cpu basis using the cpuidle/enable sysfs entry. Also, with the coming of cpuidle driver each state's target residency is per-driver unlike earlier which was per-device. Therefore, the per-cpu sysfs smt-snooze-delay which decides the target residency of the idle state on a particular cpu causes more confusion to the user as we cannot have different smt-snooze-delay (target residency) values for each cpu. In the current code, smt-snooze-delay functionality is completely broken. It makes sense to remove smt-snooze-delay from idle driver with the coming of cpuidle framework. However, sysfs files are retained as ppc64_util currently utilises it. Once we fix ppc64_util, propose to clean up the kernel code. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29powerpc/pseries/cpuidle: Remove MAX_IDLE_STATE macro.Deepthi Dharwar1-18/+10
This patch removes the usage of MAX_IDLE_STATE macro and dead code around it. The number of states are determined at run time based on the cpuidle state table selected on a given platform Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29powerpc/pseries/cpuidle: Make cpuidle-pseries backend driver a non-module.Deepthi Dharwar1-14/+1
Currently cpuidle-pseries backend driver cannot be built as a module due to dependencies wrt cpuidle framework. This patch removes all the module related code in the driver. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29powerpc/pseries/cpuidle: Use cpuidle_register() for initialisation.Deepthi Dharwar1-67/+11
This patch replaces the cpuidle driver and devices initialisation calls with a single generic cpuidle_register() call and also includes minor refactoring of the code around it. Remove the cpu online check in snooze loop, as this code can only locally run on a cpu only if it is online. Therefore, this check is not required. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29powerpc/pseries/cpuidle: Move processor_idle.c to drivers/cpuidle.Deepthi Dharwar4-0/+381
Move the file from arch specific pseries/processor_idle.c to drivers/cpuidle/cpuidle-pseries.c Make the relevant Makefile and Kconfig changes. Also, introduce Kconfig.powerpc in drivers/cpuidle for all powerpc cpuidle drivers. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30ARM/cpuidle: remove __init tag from Calxeda cpuidle probe functionAndre Przywara1-1/+1
Commit 60a66e370007e8535b7a561353b07b37deaf35ba changed the Calxeda cpuidle driver to a platform driver, copying the __init tag from the _init() to the newly used _probe() function. However, "probe should not be __init." (Rob said ;-) Remove the __init tag to fix a section mismatch in the Calxeda cpuidle driver. Signed-off-by: Andre Przywara <andre.przywara@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-04cpuidle: Check for dev before deregistering it.Konrad Rzeszutek Wilk1-1/+1
If not, we could end up in the unfortunate situation where we dereference a NULL pointer b/c we have cpuidle disabled. This is the case when booting under Xen (which uses the ACPI P/C states but disables the CPU idle driver) - and can be easily reproduced when booting with cpuidle.off=1. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8156db4a>] cpuidle_unregister_device+0x2a/0x90 .. snip.. Call Trace: [<ffffffff813b15b4>] acpi_processor_power_exit+0x3c/0x5c [<ffffffff813af0a9>] acpi_processor_stop+0x61/0xb6 [<ffffffff814215bf>] __device_release_driver+0fffff81421653>] device_release_driver+0x23/0x30 [<ffffffff81420ed8>] bus_remove_device+0x108/0x180 [<ffffffff8141d9d9>] device_del+0x129/0x1c0 [<ffffffff813cb4b0>] ? unregister_xenbus_watch+0x1f0/0x1f0 [<ffffffff8141da8e>] device_unregister+0x1e/0x60 [<ffffffff814243e9>] unregister_cpu+0x39/0x60 [<ffffffff81019e03>] arch_unregister_cpu+0x23/0x30 [<ffffffff813c3c51>] handle_vcpu_hotplug_event+0xc1/0xe0 [<ffffffff813cb4f5>] xenwatch_thread+0x45/0x120 [<ffffffff810af010>] ? abort_exclusive_wait+0xb0/0xb0 [<ffffffff8108ec42>] kthread+0xd2/0xf0 [<ffffffff8108eb70>] ? kthread_create_on_node+0x180/0x180 [<ffffffff816ce17c>] ret_from_fork+0x7c/0xb0 [<ffffffff8108eb70>] ? kthread_create_on_node+0x180/0x180 This problem also appears in 3.12 and could be a candidate for backport. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-14Merge tag 'pm+acpi-3.13-rc1' of ↵Linus Torvalds10-143/+170
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael J Wysocki: - New power capping framework and the the Intel Running Average Power Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan. - Addition of the in-kernel switching feature to the arm_big_little cpufreq driver from Viresh Kumar and Nicolas Pitre. - cpufreq support for iMac G5 from Aaro Koskinen. - Baytrail processors support for intel_pstate from Dirk Brandewie. - cpufreq support for Midway/ECX-2000 from Mark Langsdorf. - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha. - ACPI power management support for the I2C and SPI bus types from Mika Westerberg and Lv Zheng. - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat, Stratos Karafotis, Xiaoguang Chen, Lan Tianyu. - cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev. - intel_pstate updates from Dirk Brandewie and Adrian Huang. - ACPICA update to version 20130927 includig fixes and cleanups and some reduction of divergences between the ACPICA code in the kernel and ACPICA upstream in order to improve the automatic ACPICA patch generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh Bhat, Bjorn Helgaas, David E Box. - ACPI IPMI driver fixes and cleanups from Lv Zheng. - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang Yanfei, Rafael J Wysocki. - Conversion of the ACPI AC driver to the platform bus type and multiple driver fixes and cleanups related to ACPI from Zhang Rui. - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu, Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki. - Fixes and cleanups and new blacklist entries related to the ACPI video support from Aaron Lu, Felipe Contreras, Lennart Poettering, Kirill Tkhai. - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi. - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han, Bartlomiej Zolnierkiewicz, Prarit Bhargava. - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe. - Operation Performance Points (OPP) core updates from Nishanth Menon. - Runtime power management core fix from Rafael J Wysocki and update from Ulf Hansson. - Hibernation fixes from Aaron Lu and Rafael J Wysocki. - Device suspend/resume lockup detection mechanism from Benoit Goby. - Removal of unused proc directories created for various ACPI drivers from Lan Tianyu. - ACPI LPSS driver fix and new device IDs for the ACPI platform scan handler from Heikki Krogerus and Jarkko Nikula. - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa. - Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter, Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause, Liu Chuansheng. - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding, Jean-Christophe Plagniol-Villard. * tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits) cpufreq: conservative: fix requested_freq reduction issue ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines PM / runtime: Use pm_runtime_put_sync() in __device_release_driver() ACPI / event: remove unneeded NULL pointer check Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1" ACPI / video: Quirk initial backlight level 0 ACPI / video: Fix initial level validity test intel_pstate: skip the driver if ACPI has power mgmt option PM / hibernate: Avoid overflow in hibernate_preallocate_memory() ACPI / hotplug: Do not execute "insert in progress" _OST ACPI / hotplug: Carry out PCI root eject directly ACPI / hotplug: Merge device hot-removal routines ACPI / hotplug: Make acpi_bus_hot_remove_device() internal ACPI / hotplug: Simplify device ejection routines ACPI / hotplug: Fix handle_root_bridge_removal() ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug ACPI / scan: Start matching drivers after trying scan handlers ACPI: Remove acpi_pci_slot_init() headers from internal.h ACPI / blacklist: fix name of ThinkPad Edge E530 PowerCap: Fix build error with option -Werror=format-security ... Conflicts: arch/arm/mach-omap2/opp.c drivers/Kconfig drivers/spi/spi.c
2013-10-30cpuidle: remove cpuidle_unregister_governor()Viresh Kumar1-43/+0
cpuidle_unregister_governor() and cpuidle_replace_governor() aren't used anymore and can be removed. They were used by cpufreq governors earlier, but since the governors can't be compiled as modules any more, these two functions aren't necessary. Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30cpuidle: don't call poll_idle_init() for every cpuViresh Kumar2-41/+42
poll_idle_init() just initializes drv->states[0] and so that is required to be done only once for each driver. Currently, it is called from cpuidle_enable_device() which is called for every CPU that the driver supports. That is not required, so move it to a better place and call it from __cpuidle_register_driver() so that the initialization is carried out only once. Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30cpuidle: use drv instead of cpuidle_driver in show_current_driver()Viresh Kumar1-4/+4
Instances of "struct cpuidle_driver *" are consistently named as "drv" in the cpuidle core except in show_current_driver(). Make that function use variable naming consistent with the rest of the code. [rjw: Changelog] Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30cpuidle: call cpuidle_get_driver() from after taking cpuidle_driver_lockViresh Kumar2-2/+4
There are a few cpuidle_get_driver() calls that aren't made under cpuidle_driver_lock which is incorrect. Fix them by calling cpuidle_get_driver() after taking cpuidle_driver_lock. Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30cpuidle: replace multiline statements with single line in cpuidle_idle_call()Viresh Kumar1-4/+2
Few statements in cpuidle_idle_call() are broken into multiple lines, although that isn't really necessary. Convert those to single line. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30cpuidle: reduce code duplication inside cpuidle_idle_call()Viresh Kumar1-2/+5
We are doing this twice in cpuidle_idle_call() routine: drv->states[next_state].flags & CPUIDLE_FLAG_TIMER_STOP Would be better if we actually store this in a local variable and use that. That reduces code duplication and likely makes this piece of code run faster (in case the compiler wasn't able to optimize it earlier) [rjw: Cast the result of bitwise AND to bool explicitly using !!] Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30cpuidle: merge two if() statements for checking error casesViresh Kumar1-4/+1
Two checks cpuidle_idle_call() cause the same error code to be returned if they fail, so merge them for clarity. [rjw: Changelog] Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30cpuidle: rearrange __cpuidle_register_device() to keep minimal exit pointsViresh Kumar1-5/+4
This patch rearranges __cpuidle_register_device() a bit in order to reduce the number of exit points in that function. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30cpuidle: rearrange code in __cpuidle_driver_init()Viresh Kumar1-6/+4
This is trivial patch that just reorders a few statements in __cpuidle_driver_init() routine so that we don't need both 'continue' and 'break' in the for loop. Functionally it shouldn't change anything. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30cpuidle: make __cpuidle_driver_init() return voidViresh Kumar1-8/+2
The only value returned by __cpuidle_driver_init() is 0, so it very well may be a void function. [rjw: Changelog] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30cpuidle: make __cpuidle_device_init() return voidViresh Kumar1-6/+2
The only value returned by __cpuidle_device_init() is 0, so it very well may be a void function. Make that happen. [rjw: Changelog] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30cpuidle: Fix comments in cpuidle coreViresh Kumar3-5/+5
Some comments in cpuidle core files contain trivial mistakes. This patch fixes them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-17ARM: at91: cpuidle: Move driver to drivers/cpuidleDaniel Lezcano3-0/+77
As the cpuidle driver code has no more the dependency with the pm code, the 'standby' callback being passed as a parameter to the device's platform data, we can move the cpuidle driver in the drivers/cpuidle directory. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Conflicts: drivers/cpuidle/Kconfig.arm drivers/cpuidle/Makefile
2013-10-07ARM: ux500: cpuidle: fix section mismatchDaniel Lezcano1-1/+1
The dbx500_cpuidle_probe is tagged as an __init section but the variable dbx500_cpuidle_plat_driver is not. The dbx500_cpuidle_probe could not be declared as __init because of macro module_platform_driver builds the exit function, tags as __exit and this one refers to the dbx500_cpuidle_plat_driver which is an __initdata. That leads to a section mismatch. Fix it by removing the __init tag for the probe function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>