Age | Commit message (Collapse) | Author | Files | Lines |
|
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably
many more in arch/*/crypto/ and drivers/crypto/.
Some algorithms can even set this flag when the key is the correct
length. For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.
So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly. But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The AMD-TEE driver should check if TEE is available before
registering itself with TEE subsystem. This ensures that
there is a TEE which the driver can talk to before proceeding
with tee device node allocation.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Reviewed-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Extend the functionality of AMD Secure Processor (SP) driver by
providing an in-kernel API to submit commands to TEE ring buffer for
processing by Trusted OS running on AMD Secure Processor.
Following TEE commands are supported by Trusted OS:
* TEE_CMD_ID_LOAD_TA : Load Trusted Application (TA) binary into
TEE environment
* TEE_CMD_ID_UNLOAD_TA : Unload TA binary from TEE environment
* TEE_CMD_ID_OPEN_SESSION : Open session with loaded TA
* TEE_CMD_ID_CLOSE_SESSION : Close session with loaded TA
* TEE_CMD_ID_INVOKE_CMD : Invoke a command with loaded TA
* TEE_CMD_ID_MAP_SHARED_MEM : Map shared memory
* TEE_CMD_ID_UNMAP_SHARED_MEM : Unmap shared memory
Linux AMD-TEE driver will use this API to submit command buffers
for processing in Trusted Execution Environment. The AMD-TEE driver
shall be introduced in a separate patch.
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Adds a PCI device entry for Raven Ridge. Raven Ridge is an APU with a
dedicated AMD Secure Processor having Trusted Execution Environment (TEE)
support. The TEE provides a secure environment for running Trusted
Applications (TAs) which implement security-sensitive parts of a feature.
This patch configures AMD Secure Processor's TEE interface by initializing
a ring buffer (shared memory between Rich OS and Trusted OS) which can hold
multiple command buffer entries. The TEE interface is facilitated by a set
of CPU to PSP mailbox registers.
The next patch will address how commands are submitted to the ring buffer.
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Read PSP feature register to check for TEE (Trusted Execution Environment)
support.
If neither SEV nor TEE is supported by PSP, then skip PSP initialization.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
PSP can support both SEV and TEE interface. Therefore, move
SEV specific registers to a dedicated data structure.
TEE interface specific registers will be added in a later
patch.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The PSP (Platform Security Processor) provides support for key management
commands in Secure Encrypted Virtualization (SEV) mode, along with
software-based Trusted Execution Environment (TEE) to enable third-party
Trusted Applications.
Therefore, introduce psp-dev.c and psp-dev.h files, which can invoke
SEV (or TEE) initialization based on platform feature support.
TEE interface support will be introduced in a later patch.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This is a preliminary patch for creating a generic PSP device driver
file, which will have support for both SEV and TEE (Trusted Execution
Environment) interface.
This patch does not introduce any new functionality, but simply renames
psp-dev.c and psp-dev.h files to sev-dev.c and sev-dev.h files
respectively.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
AMD Seattle incorporates a non-PCI version of the v3 CCP crypto
accelerator, and this version was left behind when the maximum
RSA modulus size was parameterized in order to support v5 hardware
which supports larger moduli than v3 hardware does. Due to this
oversight, RSA acceleration no longer works at all on these systems.
Fix this by setting the .rsamax property to the appropriate value
for v3 platform hardware.
Fixes: e28c190db66830c0 ("csrypto: ccp - Expand RSA support for a v5 ccp")
Cc: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull crypto updates from Herbert Xu:
"API:
- Add library interfaces of certain crypto algorithms for WireGuard
- Remove the obsolete ablkcipher and blkcipher interfaces
- Move add_early_randomness() out of rng_mutex
Algorithms:
- Add blake2b shash algorithm
- Add blake2s shash algorithm
- Add curve25519 kpp algorithm
- Implement 4 way interleave in arm64/gcm-ce
- Implement ciphertext stealing in powerpc/spe-xts
- Add Eric Biggers's scalar accelerated ChaCha code for ARM
- Add accelerated 32r2 code from Zinc for MIPS
- Add OpenSSL/CRYPTOGRAMS poly1305 implementation for ARM and MIPS
Drivers:
- Fix entropy reading failures in ks-sa
- Add support for sam9x60 in atmel
- Add crypto accelerator for amlogic GXL
- Add sun8i-ce Crypto Engine
- Add sun8i-ss cryptographic offloader
- Add a host of algorithms to inside-secure
- Add NPCM RNG driver
- add HiSilicon HPRE accelerator
- Add HiSilicon TRNG driver"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (285 commits)
crypto: vmx - Avoid weird build failures
crypto: lib/chacha20poly1305 - use chacha20_crypt()
crypto: x86/chacha - only unregister algorithms if registered
crypto: chacha_generic - remove unnecessary setkey() functions
crypto: amlogic - enable working on big endian kernel
crypto: sun8i-ce - enable working on big endian
crypto: mips/chacha - select CRYPTO_SKCIPHER, not CRYPTO_BLKCIPHER
hwrng: ks-sa - Enable COMPILE_TEST
crypto: essiv - remove redundant null pointer check before kfree
crypto: atmel-aes - Change data type for "lastc" buffer
crypto: atmel-tdes - Set the IV after {en,de}crypt
crypto: sun4i-ss - fix big endian issues
crypto: sun4i-ss - hide the Invalid keylen message
crypto: sun4i-ss - use crypto_ahash_digestsize
crypto: sun4i-ss - remove dependency on not 64BIT
crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c
MAINTAINERS: Add maintainer for HiSilicon SEC V2 driver
crypto: hisilicon - add DebugFS for HiSilicon SEC
Documentation: add DebugFS doc for HiSilicon SEC
crypto: hisilicon - add SRIOV for HiSilicon SEC
...
|
|
Currently, there is no privilege separation of the SEV command; you can
run them all or none of them. This is less than ideal because it means
that a compromise of the code which launches VMs could make permanent
change to the SEV certifcate chain which will affect others.
These commands are required to attest the VM environment:
- SEV_PDH_CERT_EXPORT
- SEV_PLATFORM_STATUS
- SEV_GET_{ID,ID2}
These commands manage the SEV certificate chain:
- SEV_PEK_CERR_IMPORT
- SEV_FACTORY_RESET
- SEV_PEK_GEN
- SEV_PEK_CSR
- SEV_PDH_GEN
Lets add the CAP_SYS_ADMIN check for the group of the commands which alters
the SEV certificate chain to provide some level of privilege separation.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Tested-by: David Rientjes <rientjes@google.com>
Co-developed-by: David Rientjes <rientjes@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Reviewed-by: Gary R Hook <gary.hook@amd.com>
Tested-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that the blkcipher algorithm type has been removed in favor of
skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher,
and rename the config options accordingly:
CONFIG_CRYPTO_BLKCIPHER => CONFIG_CRYPTO_SKCIPHER
CONFIG_CRYPTO_BLKCIPHER2 => CONFIG_CRYPTO_SKCIPHER2
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
A NULL-pointer dereference was reported in fedora bz#1762199 while
reshaping a raid6 array after adding a fifth drive to an existing
array.
[ 47.343549] md/raid:md0: raid level 6 active with 3 out of 5 devices, algorithm 2
[ 47.804017] md0: detected capacity change from 0 to 7885289422848
[ 47.822083] Unable to handle kernel read from unreadable memory at virtual address 0000000000000000
...
[ 47.940477] CPU: 1 PID: 14210 Comm: md0_raid6 Tainted: G W 5.2.18-200.fc30.aarch64 #1
[ 47.949594] Hardware name: AMD Overdrive/Supercharger/To be filled by O.E.M., BIOS ROD1002C 04/08/2016
[ 47.958886] pstate: 00400085 (nzcv daIf +PAN -UAO)
[ 47.963668] pc : __list_del_entry_valid+0x2c/0xa8
[ 47.968366] lr : ccp_tx_submit+0x84/0x168 [ccp]
[ 47.972882] sp : ffff00001369b970
[ 47.976184] x29: ffff00001369b970 x28: ffff00001369bdb8
[ 47.981483] x27: 00000000ffffffff x26: ffff8003b758af70
[ 47.986782] x25: ffff8003b758b2d8 x24: ffff8003e6245818
[ 47.992080] x23: 0000000000000000 x22: ffff8003e62450c0
[ 47.997379] x21: ffff8003dfd6add8 x20: 0000000000000003
[ 48.002678] x19: ffff8003e6245100 x18: 0000000000000000
[ 48.007976] x17: 0000000000000000 x16: 0000000000000000
[ 48.013274] x15: 0000000000000000 x14: 0000000000000000
[ 48.018572] x13: ffff7e000ef83a00 x12: 0000000000000001
[ 48.023870] x11: ffff000010eff998 x10: 00000000000019a0
[ 48.029169] x9 : 0000000000000000 x8 : ffff8003e6245180
[ 48.034467] x7 : 0000000000000000 x6 : 000000000000003f
[ 48.039766] x5 : 0000000000000040 x4 : ffff8003e0145080
[ 48.045064] x3 : dead000000000200 x2 : 0000000000000000
[ 48.050362] x1 : 0000000000000000 x0 : ffff8003e62450c0
[ 48.055660] Call trace:
[ 48.058095] __list_del_entry_valid+0x2c/0xa8
[ 48.062442] ccp_tx_submit+0x84/0x168 [ccp]
[ 48.066615] async_tx_submit+0x224/0x368 [async_tx]
[ 48.071480] async_trigger_callback+0x68/0xfc [async_tx]
[ 48.076784] ops_run_biofill+0x178/0x1e8 [raid456]
[ 48.081566] raid_run_ops+0x248/0x818 [raid456]
[ 48.086086] handle_stripe+0x864/0x1208 [raid456]
[ 48.090781] handle_active_stripes.isra.0+0xb0/0x278 [raid456]
[ 48.096604] raid5d+0x378/0x618 [raid456]
[ 48.100602] md_thread+0xa0/0x150
[ 48.103905] kthread+0x104/0x130
[ 48.107122] ret_from_fork+0x10/0x18
[ 48.110686] Code: d2804003 f2fbd5a3 eb03003f 54000320 (f9400021)
[ 48.116766] ---[ end trace 23f390a527f7ad77 ]---
ccp_tx_submit is passed a dma_async_tx_descriptor which is contained in
a ccp_dma_desc and adds it to a ccp channel's pending list:
list_del(&desc->entry);
list_add_tail(&desc->entry, &chan->pending);
The problem is that desc->entry may be uninitialized in the
async_trigger_callback path where the descriptor was gotten
from ccp_prep_dma_interrupt which got it from ccp_alloc_dma_desc
which doesn't initialize the desc->entry list head. So, just
initialize the list head to avoid the problem.
Cc: <stable@vger.kernel.org>
Reported-by: Sahaj Sarup <sahajsarup@gmail.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Check early whether device registers can be accessed. Some BIOSes have
a broken security policy that prevents access to the device registers,
and return values from ioread() can be misinterpreted. If a read of
a feature register returns a -1, we may not be able to access
any device register, so report the problem and suggestion, and return.
For the PSP, the feature register is checked. For the CCP, the queue
register is checked.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If an AMD BIOS makes zero CCP queues available to the driver, the
device is unavailable and therefore can't be activated. When this
happens, report the status but don't report a (non-existent)
failure. The CCP will be unactivated.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
SEV INIT command loads the SEV related persistent data from NVS
and initializes the platform context. The firmware validates the
persistent state. If validation fails, the firmware will reset
the persisent state and return an integrity check failure status.
At this point, a subsequent INIT command should succeed, so retry
the command. The INIT command retry is only done during driver
initialization.
Additional enums along with SEV_RET_SECURE_DATA_INVALID are added
to sev_ret_code to maintain continuity and relevance of enum values.
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Performing a WBINVD and DF_FLUSH are expensive operations. The SEV support
currently performs this WBINVD/DF_FLUSH combination when an SEV guest is
terminated, so there is no need for it to be done before LAUNCH.
However, when the SEV firmware transitions the platform from UNINIT state
to INIT state, all ASIDs will be marked invalid across all threads.
Therefore, as part of transitioning the platform to INIT state, perform a
WBINVD/DF_FLUSH after a successful INIT in the PSP/SEV device driver.
Since the PSP/SEV device driver is x86 only, it can reference and use the
WBINVD related functions directly.
Cc: Gary Hook <gary.hook@amd.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Release all allocated memory if sha type is invalid:
In ccp_run_sha_cmd, if the type of sha is invalid, the allocated
hmac_buf should be released.
v2: fix the goto.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add the ability to abort a skcipher walk.
Algorithms:
- Fix XTS to actually do the stealing.
- Add library helpers for AES and DES for single-block users.
- Add library helpers for SHA256.
- Add new DES key verification helper.
- Add surrounding bits for ESSIV generator.
- Add accelerations for aegis128.
- Add test vectors for lzo-rle.
Drivers:
- Add i.MX8MQ support to caam.
- Add gcm/ccm/cfb/ofb aes support in inside-secure.
- Add ofb/cfb aes support in media-tek.
- Add HiSilicon ZIP accelerator support.
Others:
- Fix potential race condition in padata.
- Use unbound workqueues in padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (311 commits)
crypto: caam - Cast to long first before pointer conversion
crypto: ccree - enable CTS support in AES-XTS
crypto: inside-secure - Probe transform record cache RAM sizes
crypto: inside-secure - Base RD fetchcount on actual RD FIFO size
crypto: inside-secure - Base CD fetchcount on actual CD FIFO size
crypto: inside-secure - Enable extended algorithms on newer HW
crypto: inside-secure: Corrected configuration of EIP96_TOKEN_CTRL
crypto: inside-secure - Add EIP97/EIP197 and endianness detection
padata: remove cpu_index from the parallel_queue
padata: unbind parallel jobs from specific CPUs
padata: use separate workqueues for parallel and serial work
padata, pcrypt: take CPU hotplug lock internally in padata_alloc_possible
crypto: pcrypt - remove padata cpumask notifier
padata: make padata_do_parallel find alternate callback CPU
workqueue: require CPU hotplug read exclusion for apply_workqueue_attrs
workqueue: unconfine alloc/apply/free_workqueue_attrs()
padata: allocate workqueue internally
arm64: dts: imx8mq: Add CAAM node
random: Use wait_event_freezable() in add_hwgenerator_randomness()
crypto: ux500 - Fix COMPILE_TEST warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a potential crash in the ccp driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Ignore unconfigured CCP device on suspend/resume
|
|
For correctness and compliance with the XTS-AES specification, we are
adding support for ciphertext stealing to XTS implementations, even
though no use cases are known that will be enabled by this.
Since the ccp driver already has a fallback skcipher standby for
dealing with input sizes other than [16, 512, 1024, 2048, 4096],
just drop the check against the block size.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gary Hook <gary.hook@amd.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If a CCP is unconfigured (e.g. there are no available queues) then
there will be no data structures allocated for the device. Thus, we
must check for validity of a pointer before trying to access structure
members.
Fixes: 720419f01832f ("crypto: ccp - Introduce the AMD Secure Processor device")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a number of bugs in the ccp driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Ignore tag length when decrypting GCM ciphertext
crypto: ccp - Add support for valid authsize values less than 16
crypto: ccp - Fix oops by properly managing allocated structures
|
|
Remove unused includes of linux/pci.h.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
ccp-dev.h uses dma_direction, which is defined in linux/dma-direction.h.
Include that explicitly instead of relying on it being included via
linux/pci.h, since ccp-dev.h requires nothing else from linux/pci.h.
Similarly, ccp-dmaengine.c uses dma_get_mask(), which is defined in
linux/dma-mapping.h, so include that explicitly since it requires nothing
else from linux/pci.h.
A future patch will remove the includes of linux/pci.h where it is not
needed.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Return and fail driver initialization if a DMA pool or coherent memory
can't be allocated. Be sure to clean up allocated memory.
Fixes: 4b394a232df7 ("crypto: ccp - Let a v5 CCP provide the same function as v3")
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If there are no CCP devices on the system, ccp-crypto will not load.
Write a message to the system log clarifying the reason for the failure
of the modprobe operation
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
AES GCM input buffers for decryption contain AAD+CTEXT+TAG. Only
decrypt the ciphertext, and use the tag for comparison.
Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
AES GCM encryption allows for authsize values of 4, 8, and 12-16 bytes.
Validate the requested authsize, and retain it to save in the request
context.
Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
A plaintext or ciphertext length of 0 is allowed in AES, in which case
no encryption occurs. Ensure that we don't clean up data structures
that were never allocated.
Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use dma_pool_zalloc instead of using dma_pool_alloc to allocate
memory and then zeroing it with memset 0.
This simplifies the code.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Each of the operations in ccp_run_cmd() needs several hundred
bytes of kernel stack. Depending on the inlining, these may
need separate stack slots that add up to more than the warning
limit, as shown in this clang based build:
drivers/crypto/ccp/ccp-ops.c:871:12: error: stack frame size of 1164 bytes in function 'ccp_run_aes_cmd' [-Werror,-Wframe-larger-than=]
static int ccp_run_aes_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd)
The problem may also happen when there is no warning, e.g. in the
ccp_run_cmd()->ccp_run_aes_cmd()->ccp_run_aes_gcm_cmd() call chain with
over 2000 bytes.
Mark each individual function as 'noinline_for_stack' to prevent
this from happening, and move the calls to the two special cases for aes
into the top-level function. This will keep the actual combined stack
usage to the mimimum: 828 bytes for ccp_run_aes_gcm_cmd() and
at most 524 bytes for each of the other cases.
Fixes: 63b945091a07 ("crypto: ccp - CCP device driver and interface support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Redefine pr_fmt so that the module name is prefixed to every
log message produced by the ccp-crypto module
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The CCP driver is able to act as a DMA engine. Add a module parameter that
allows this feature to be enabled/disabled.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Provide the ability to constrain the total number of enabled devices in
the system. Once max_devs devices have been configured, subsequently
probed devices are ignored.
The max_devs parameter may be zero, in which case all CCPs are disabled.
PSPs are always enabled and active.
Disabling the CCPs also disables DMA and RNG registration.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a module parameter to limit the number of queues per CCP. The default
value (nqueues=0) is to set up every available queue on each device.
The count of queues starts from the first one found on the device (which
varies based on the device ID).
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a config option to exclude DebugFS support in the CCP driver.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the AES library instead of the cipher interface to perform
the single block of AES processing involved in updating the key
of the cmac(aes) hash.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Fix missed wake-up race in padata
- Use crypto_memneq in ccp
- Fix version check in ccp
- Fix fuzz test failure in ccp
- Fix potential double free in crypto4xx
- Fix compile warning in stm32
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
padata: use smp_mb in padata_reorder to avoid orphaned padata jobs
crypto: ccp - Fix SEV_VERSION_GREATER_OR_EQUAL
crypto: ccp/gcm - use const time tag comparison.
crypto: ccp - memset structure fields to zero before reuse
crypto: crypto4xx - fix a potential double free in ppc4xx_trng_probe
crypto: stm32/hash - Fix incorrect printk modifier for size_t
|
|
SEV_VERSION_GREATER_OR_EQUAL() will fail if upgrading from 2.2 to 3.1, for
example, because the minor version is not equal to or greater than the
major.
Fix this and move to a static inline function for appropriate type
checking.
Fixes: edd303ff0e9e ("crypto: ccp - Add DOWNLOAD_FIRMWARE SEV command")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Avoid leaking GCM tag through timing side channel.
Fixes: 36cf515b9bbe ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Cfir Cohen <cfir@google.com>
Acked-by: Gary R Hook <ghook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The AES GCM function reuses an 'op' data structure, which members
contain values that must be cleared for each (re)use.
This fix resolves a crypto self-test failure:
alg: aead: gcm-aes-ccp encryption test failed (wrong result) on test vector 2, cfg="two even aligned splits"
Fixes: 36cf515b9bbe ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 5.3:
API:
- Test shash interface directly in testmgr
- cra_driver_name is now mandatory
Algorithms:
- Replace arc4 crypto_cipher with library helper
- Implement 5 way interleave for ECB, CBC and CTR on arm64
- Add xxhash
- Add continuous self-test on noise source to drbg
- Update jitter RNG
Drivers:
- Add support for SHA204A random number generator
- Add support for 7211 in iproc-rng200
- Fix fuzz test failures in inside-secure
- Fix fuzz test failures in talitos
- Fix fuzz test failures in qat"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits)
crypto: stm32/hash - remove interruptible condition for dma
crypto: stm32/hash - Fix hmac issue more than 256 bytes
crypto: stm32/crc32 - rename driver file
crypto: amcc - remove memset after dma_alloc_coherent
crypto: ccp - Switch to SPDX license identifiers
crypto: ccp - Validate the the error value used to index error messages
crypto: doc - Fix formatting of new crypto engine content
crypto: doc - Add parameter documentation
crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR
crypto: arm64/aes-ce - add 5 way interleave routines
crypto: talitos - drop icv_ool
crypto: talitos - fix hash on SEC1.
crypto: talitos - move struct talitos_edesc into talitos.h
lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
crypto/NX: Set receive window credits to max number of CRBs in RxFIFO
crypto: asymmetric_keys - select CRYPTO_HASH where needed
crypto: serpent - mark __serpent_setkey_sbox noinline
crypto: testmgr - dynamically allocate crypto_shash
crypto: testmgr - dynamically allocate testvec_config
crypto: talitos - eliminate unneeded 'done' functions at build time
...
|
|
Add an SPDX identifier and remove any specific statements.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The error code read from the queue status register is only 6 bits wide,
but we need to verify its value is within range before indexing the error
messages.
Fixes: 81422badb3907 ("crypto: ccp - Make syslog errors human-readable")
Cc: <stable@vger.kernel.org>
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Crypto self-tests reveal an error:
alg: skcipher: cbc-des3-ccp encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
The offset value should not be recomputed when retrieving the context.
Also, a code path exists which makes decisions based on older (version 3)
hardware; a v3 device deosn't support 3DES so remove this check.
Fixes: 990672d48515 ('crypto: ccp - Enable 3DES function on v5 CCPs')
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|