Age | Commit message (Collapse) | Author | Files | Lines |
|
The scheduled tasklet needs to be executed on device remove.
Fixes: fed93fb62e05 ("crypto: virtio - Handle dataq logic with tasklet")
Signed-off-by: wangyangxin <wangyangxin1@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Doing ipsec produces a spinlock recursion warning.
This is due to crypto_finalize_request() being called in the upper half.
Move virtual data queue processing of virtio-crypto driver to tasklet.
Fixes: dbaf0624ffa57 ("crypto: add virtio-crypto driver")
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: wangyangxin <wangyangxin1@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
MST pointed out: config change callback is also handled incorrectly
in this driver, it takes a mutex from interrupt context.
Handle config changed by work queue instead.
Cc: stable@vger.kernel.org
Cc: Gonglei (Arei) <arei.gonglei@huawei.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20231007064309.844889-1-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Use the new crypto_engine_op interface where the callback is stored
in the algorithm object.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
For virtio-net we were getting CPU stall warnings, and fixed it by
calling the scheduler: see f8bb51043945 ("virtio_net: suppress cpu stall
when free_unused_bufs").
This driver is similar so theoretically the same logic applies.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20230609131817.712867-2-xianting.tian@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Use kmap_local instead of kmap_atomic
- Change request callback to take void pointer
- Print FIPS status in /proc/crypto (when enabled)
Algorithms:
- Add rfc4106/gcm support on arm64
- Add ARIA AVX2/512 support on x86
Drivers:
- Add TRNG driver for StarFive SoC
- Delete ux500/hash driver (subsumed by stm32/hash)
- Add zlib support in qat
- Add RSA support in aspeed"
* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
crypto: x86/aria-avx - Do not use avx2 instructions
crypto: aspeed - Fix modular aspeed-acry
crypto: hisilicon/qm - fix coding style issues
crypto: hisilicon/qm - update comments to match function
crypto: hisilicon/qm - change function names
crypto: hisilicon/qm - use min() instead of min_t()
crypto: hisilicon/qm - remove some unused defines
crypto: proc - Print fips status
crypto: crypto4xx - Call dma_unmap_page when done
crypto: octeontx2 - Fix objects shared between several modules
crypto: nx - Fix sparse warnings
crypto: ecc - Silence sparse warning
tls: Pass rec instead of aead_req into tls_encrypt_done
crypto: api - Remove completion function scaffolding
tls: Remove completion function scaffolding
tipc: Remove completion function scaffolding
net: ipv6: Remove completion function scaffolding
net: ipv4: Remove completion function scaffolding
net: macsec: Remove completion function scaffolding
dm: Remove completion function scaffolding
...
|
|
There is no need to use GFP_ATOMIC here. GFP_KERNEL is already used for
another memory allocation just the line after.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
'vc_ctrl_req' is alloced in virtio_crypto_alg_skcipher_close_session(),
and should be freed in the invalid ctrl_status->status error handling
case. Otherwise there is a memory leak.
Fixes: 0756ad15b1fe ("virtio-crypto: use private buffer for control request")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20221114110740.537276-1-weiyongjun@huaweicloud.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: zhenwei pi<pizhenwei@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
The value of reqsize must only be changed through the helper.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix memory-leak for virtio-crypto akcipher request, this problem is
introduced by 59ca6c93387d3(virtio-crypto: implement RSA algorithm).
The leak can be reproduced and tested with the following script
inside virtual machine:
#!/bin/bash
LOOP_TIMES=10000
# required module: pkcs8_key_parser, virtio_crypto
modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
modprobe virtio_crypto # if CONFIG_CRYPTO_DEV_VIRTIO=m
rm -rf /tmp/data
dd if=/dev/random of=/tmp/data count=1 bs=230
# generate private key and self-signed cert
openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem \
-outform der -out cert.der \
-subj "/C=CN/ST=GD/L=SZ/O=vihoo/OU=dev/CN=always.com/emailAddress=yy@always.com"
# convert private key from pem to der
openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der
# add key
PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s`
echo "priv key id = "$PRIV_KEY_ID
PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s`
echo "pub key id = "$PUB_KEY_ID
# query key
keyctl pkey_query $PRIV_KEY_ID 0
keyctl pkey_query $PUB_KEY_ID 0
# here we only run pkey_encrypt becasuse it is the fastest interface
function bench_pub() {
keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub
}
# do bench_pub in loop to obtain the memory leak
for (( i = 0; i < ${LOOP_TIMES}; ++i )); do
bench_pub
done
Signed-off-by: lei he <helei.sig11@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <20220919075158.3625-1-helei.sig11@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Enable retry for virtio-crypto-dev, so that crypto-engine
can process cipher-requests parallelly.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220506131627.180784-6-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For some akcipher operations(eg, decryption of pkcs1pad(rsa)),
the length of returned result maybe less than akcipher_req->dst_len,
we need to recalculate the actual dst_len through the virt-queue
protocol.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220506131627.180784-5-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Originally, after submitting request into virtio crypto control
queue, the guest side polls the result from the virt queue. This
works like following:
CPU0 CPU1 ... CPUx CPUy
| | | |
\ \ / /
\--------spin_lock(&vcrypto->ctrl_lock)-------/
|
virtqueue add & kick
|
busy poll virtqueue
|
spin_unlock(&vcrypto->ctrl_lock)
...
There are two problems:
1, The queue depth is always 1, the performance of a virtio crypto
device gets limited. Multi user processes share a single control
queue, and hit spin lock race from control queue. Test on Intel
Platinum 8260, a single worker gets ~35K/s create/close session
operations, and 8 workers get ~40K/s operations with 800% CPU
utilization.
2, The control request is supposed to get handled immediately, but
in the current implementation of QEMU(v6.2), the vCPU thread kicks
another thread to do this work, the latency also gets unstable.
Tracking latency of virtio_crypto_alg_akcipher_close_session in 5s:
usecs : count distribution
0 -> 1 : 0 | |
2 -> 3 : 7 | |
4 -> 7 : 72 | |
8 -> 15 : 186485 |************************|
16 -> 31 : 687 | |
32 -> 63 : 5 | |
64 -> 127 : 3 | |
128 -> 255 : 1 | |
256 -> 511 : 0 | |
512 -> 1023 : 0 | |
1024 -> 2047 : 0 | |
2048 -> 4095 : 0 | |
4096 -> 8191 : 0 | |
8192 -> 16383 : 2 | |
This means that a CPU may hold vcrypto->ctrl_lock as long as 8192~16383us.
To improve the performance of control queue, a request on control queue
waits completion instead of busy polling to reduce lock racing, and gets
completed by control queue callback.
CPU0 CPU1 ... CPUx CPUy
| | | |
\ \ / /
\--------spin_lock(&vcrypto->ctrl_lock)-------/
|
virtqueue add & kick
|
---------spin_unlock(&vcrypto->ctrl_lock)------
/ / \ \
| | | |
wait wait wait wait
Test this patch, the guest side get ~200K/s operations with 300% CPU
utilization.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220506131627.180784-4-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Originally, all of the control requests share a single buffer(
ctrl & input & ctrl_status fields in struct virtio_crypto), this
allows queue depth 1 only, the performance of control queue gets
limited by this design.
In this patch, each request allocates request buffer dynamically, and
free buffer after request, so the scope protected by ctrl_lock also
get optimized here.
It's possible to optimize control queue depth in the next step.
A necessary comment is already in code, still describe it again:
/*
* Note: there are padding fields in request, clear them to zero before
* sending to host to avoid to divulge any information.
* Ex, virtio_crypto_ctrl_request::ctrl::u::destroy_session::padding[48]
*/
So use kzalloc to allocate buffer of struct virtio_crypto_ctrl_request.
Potentially dereferencing uninitialized variables:
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220506131627.180784-3-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Use temporary variable to make code easy to read and maintain.
/* Pad cipher's parameters */
vcrypto->ctrl.u.sym_create_session.op_type =
cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER);
vcrypto->ctrl.u.sym_create_session.u.cipher.para.algo =
vcrypto->ctrl.header.algo;
vcrypto->ctrl.u.sym_create_session.u.cipher.para.keylen =
cpu_to_le32(keylen);
vcrypto->ctrl.u.sym_create_session.u.cipher.para.op =
cpu_to_le32(op);
-->
sym_create_session = &ctrl->u.sym_create_session;
sym_create_session->op_type = cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER);
sym_create_session->u.cipher.para.algo = ctrl->header.algo;
sym_create_session->u.cipher.para.keylen = cpu_to_le32(keylen);
sym_create_session->u.cipher.para.op = cpu_to_le32(op);
The new style shows more obviously:
- the variable we want to operate.
- an assignment statement in a single line.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220506131627.180784-2-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Suggested by Gonglei, rename virtio_crypto_algs.c to
virtio_crypto_skcipher_algs.c. Also minor changes for function name.
Thus the function of source files get clear: skcipher services in
virtio_crypto_skcipher_algs.c and akcipher services in
virtio_crypto_akcipher_algs.c.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Link: https://lore.kernel.org/r/20220302033917.1295334-5-pizhenwei@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
|
|
Support rsa & pkcs1pad(rsa,sha1) with priority 150.
Test with QEMU built-in backend, it works fine.
1, The self-test framework of crypto layer works fine in guest kernel
2, Test with Linux guest(with asym support), the following script
test(note that pkey_XXX is supported only in a newer version of keyutils):
- both public key & private key
- create/close session
- encrypt/decrypt/sign/verify basic driver operation
- also test with kernel crypto layer(pkey add/query)
All the cases work fine.
rm -rf *.der *.pem *.pfx
modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
rm -rf /tmp/data
dd if=/dev/random of=/tmp/data count=1 bs=226
openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org"
openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der
openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der
PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s`
echo "priv key id = "$PRIV_KEY_ID
PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s`
echo "pub key id = "$PUB_KEY_ID
keyctl pkey_query $PRIV_KEY_ID 0
keyctl pkey_query $PUB_KEY_ID 0
echo "Enc with priv key..."
keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv
echo "Dec with pub key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec
echo "Sign with priv key..."
keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig
echo "Verify with pub key..."
keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
echo "Enc with pub key..."
keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub
echo "Dec with priv key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec
echo "Verify with pub key..."
keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
[1 compiling warning during development]
Reported-by: kernel test robot <lkp@intel.com>
Co-developed-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Link: https://lore.kernel.org/r/20220302033917.1295334-4-pizhenwei@bytedance.com
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org> #Kconfig tweaks
Link: https://lore.kernel.org/r/20220308205309.2192502-1-nathan@kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This will enable cleanups down the road.
The idea is to disable cbs, then add "flush_queued_cbs" callback
as a parameter, this way drivers can flush any work
queued after callbacks have been disabled.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Drivers shouldn't be enabled by default unless there is a very good
reason to do so. There doesn't seem to be any such reason for the
virtio crypto driver, so change it to the default of 'n'.
Signed-off-by: Ram Muthiah <rammuthiah@google.com>
[EB: adjusted commit message]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull virtio updates from Michael Tsirkin:
- IRQ bypass support for vdpa and IFC
- MLX5 vdpa driver
- Endianness fixes for virtio drivers
- Misc other fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (71 commits)
vdpa/mlx5: fix up endian-ness for mtu
vdpa: Fix pointer math bug in vdpasim_get_config()
vdpa/mlx5: Fix pointer math in mlx5_vdpa_get_config()
vdpa/mlx5: fix memory allocation failure checks
vdpa/mlx5: Fix uninitialised variable in core/mr.c
vdpa_sim: init iommu lock
virtio_config: fix up warnings on parisc
vdpa/mlx5: Add VDPA driver for supported mlx5 devices
vdpa/mlx5: Add shared memory registration code
vdpa/mlx5: Add support library for mlx5 VDPA implementation
vdpa/mlx5: Add hardware descriptive header file
vdpa: Modify get_vq_state() to return error code
net/vdpa: Use struct for set/get vq state
vdpa: remove hard coded virtq num
vdpasim: support batch updating
vhost-vdpa: support IOTLB batching hints
vhost-vdpa: support get/set backend features
vhost: generialize backend features setting/getting
vhost-vdpa: refine ioctl pre-processing
vDPA: dont change vq irq after DRIVER_OK
...
|
|
As said by Linus:
A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.
In "kzalloc()", the z is meaningful and an important part of what the
caller wants.
In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.
The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.
Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.
The renaming is done by using the command sequence:
git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'
followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.
[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Virtio crypto is modern-only. Use LE accessors for config space.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Set the flag CRYPTO_ALG_ALLOCATES_MEMORY in the crypto drivers that
allocate memory.
drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c: sun8i_ce_cipher
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c: sun8i_ss_cipher
drivers/crypto/amlogic/amlogic-gxl-core.c: meson_cipher
drivers/crypto/axis/artpec6_crypto.c: artpec6_crypto_common_init
drivers/crypto/bcm/cipher.c: spu_skcipher_rx_sg_create
drivers/crypto/caam/caamalg.c: aead_edesc_alloc
drivers/crypto/caam/caamalg_qi.c: aead_edesc_alloc
drivers/crypto/caam/caamalg_qi2.c: aead_edesc_alloc
drivers/crypto/caam/caamhash.c: hash_digest_key
drivers/crypto/cavium/cpt/cptvf_algs.c: process_request
drivers/crypto/cavium/nitrox/nitrox_aead.c: nitrox_process_se_request
drivers/crypto/cavium/nitrox/nitrox_skcipher.c: nitrox_process_se_request
drivers/crypto/ccp/ccp-crypto-aes-cmac.c: ccp_do_cmac_update
drivers/crypto/ccp/ccp-crypto-aes-galois.c: ccp_crypto_enqueue_request
drivers/crypto/ccp/ccp-crypto-aes-xts.c: ccp_crypto_enqueue_request
drivers/crypto/ccp/ccp-crypto-aes.c: ccp_crypto_enqueue_request
drivers/crypto/ccp/ccp-crypto-des3.c: ccp_crypto_enqueue_request
drivers/crypto/ccp/ccp-crypto-sha.c: ccp_crypto_enqueue_request
drivers/crypto/chelsio/chcr_algo.c: create_cipher_wr
drivers/crypto/hisilicon/sec/sec_algs.c: sec_alloc_and_fill_hw_sgl
drivers/crypto/hisilicon/sec2/sec_crypto.c: sec_alloc_req_id
drivers/crypto/inside-secure/safexcel_cipher.c: safexcel_queue_req
drivers/crypto/inside-secure/safexcel_hash.c: safexcel_ahash_enqueue
drivers/crypto/ixp4xx_crypto.c: ablk_perform
drivers/crypto/marvell/cesa/cipher.c: mv_cesa_skcipher_dma_req_init
drivers/crypto/marvell/cesa/hash.c: mv_cesa_ahash_dma_req_init
drivers/crypto/marvell/octeontx/otx_cptvf_algs.c: create_ctx_hdr
drivers/crypto/n2_core.c: n2_compute_chunks
drivers/crypto/picoxcell_crypto.c: spacc_sg_to_ddt
drivers/crypto/qat/qat_common/qat_algs.c: qat_alg_skcipher_encrypt
drivers/crypto/qce/skcipher.c: qce_skcipher_async_req_handle
drivers/crypto/talitos.c : talitos_edesc_alloc
drivers/crypto/virtio/virtio_crypto_algs.c: __virtio_crypto_skcipher_do_req
drivers/crypto/xilinx/zynqmp-aes-gcm.c: zynqmp_aes_aead_cipher
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
[EB: avoid overly-long lines]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
features[] and id_table[] are not modified and can be made const to
allow the compiler to put them in read-only memory.
Before:
text data bss dec hex filename
11534 2056 160 13750 35b6 drivers/crypto/virtio/virtio_crypto_core.o
After:
text data bss dec hex filename
11630 1992 128 13750 35b6 drivers/crypto/virtio/virtio_crypto_core.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The src/dst length is not aligned with AES_BLOCK_SIZE(which is 16) in some
testcases in tcrypto.ko.
For example, the src/dst length of one of cts(cbc(aes))'s testcase is 17, the
crypto_virtio driver will set @src_data_len=16 but @dst_data_len=17 in this
case and get a wrong at then end.
SRC: pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp (17 bytes)
EXP: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc pp (17 bytes)
DST: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 00 (pollute the last bytes)
(pp: plaintext cc:ciphertext)
Fix this issue by limit the length of dest buffer.
Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20200602070501.2023-4-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The system'll crash when the users insmod crypto/tcrypto.ko with mode=155
( testing "authenc(hmac(sha1),cbc(aes))" ). It's caused by reuse the memory
of request structure.
In crypto_authenc_init_tfm(), the reqsize is set to:
[PART 1] sizeof(authenc_request_ctx) +
[PART 2] ictx->reqoff +
[PART 3] MAX(ahash part, skcipher part)
and the 'PART 3' is used by both ahash and skcipher in turn.
When the virtio_crypto driver finish skcipher req, it'll call ->complete
callback(in crypto_finalize_skcipher_request) and then free its
resources whose pointers are recorded in 'skcipher parts'.
However, the ->complete is 'crypto_authenc_encrypt_done' in this case,
it will use the 'ahash part' of the request and change its content,
so virtio_crypto driver will get the wrong pointer after ->complete
finish and mistakenly free some other's memory. So the system will crash
when these memory will be used again.
The resources which need to be cleaned up are not used any more. But the
pointers of these resources may be changed in the function
"crypto_finalize_skcipher_request". Thus release specific resources before
calling this function.
Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Reported-by: LABBE Corentin <clabbe@baylibre.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200123101000.GB24255@Red
Acked-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20200602070501.2023-3-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
__virtio_crypto_skcipher_do_req()
The system will crash when the users insmod crypto/tcrypt.ko with mode=38
( testing "cts(cbc(aes))" ).
Usually the next entry of one sg will be @sg@ + 1, but if this sg element
is part of a chained scatterlist, it could jump to the start of a new
scatterlist array. Fix it by sg_next() on calculation of src/dst
scatterlist.
Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Reported-by: LABBE Corentin <clabbe@baylibre.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200123101000.GB24255@Red
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20200602070501.2023-2-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably
many more in arch/*/crypto/ and drivers/crypto/.
Some algorithms can even set this flag when the key is the correct
length. For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.
So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly. But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Return -EINVAL for input sizes that are not a multiple of the AES
block size, since they are not supported by our CBC chaining mode.
While at it, remove the pr_err() that reports unsupported key sizes
being used: we shouldn't spam the kernel log with that.
Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In order to allow for CBC to be chained, which is something that the
CTS template relies upon, implementations of CBC need to pass the
IV to be used for subsequent invocations via the IV buffer. This was
not implemented yet for virtio-crypto so implement it now.
Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that the blkcipher algorithm type has been removed in favor of
skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher,
and rename the config options accordingly:
CONFIG_CRYPTO_BLKCIPHER => CONFIG_CRYPTO_SKCIPHER
CONFIG_CRYPTO_BLKCIPHER2 => CONFIG_CRYPTO_SKCIPHER2
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not see http www gnu org licenses
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details [based]
[from] [clk] [highbank] [c] you should have received a copy of the
gnu general public license along with this program if not see http
www gnu org licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 355 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A statement is indented with spaces and not indented enough, fix this
replacing spaces with a tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Fix dcache flushing crash in skcipher.
- Add hash finup self-tests.
- Reschedule during speed tests.
Algorithms:
- Remove insecure vmac and replace it with vmac64.
- Add public key verification for DH/ECDH.
Drivers:
- Decrease priority of sha-mb on x86.
- Improve NEON latency/throughput on ARM64.
- Add md5/sha384/sha512/des/3des to inside-secure.
- Support eip197d in inside-secure.
- Only register algorithms supported by the host in virtio.
- Add cts and remove incompatible cts1 from ccree.
- Add hisilicon SEC security accelerator driver.
- Replace msm hwrng driver with qcom pseudo rng driver.
Misc:
- Centralize CRC polynomials"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (121 commits)
crypto: arm64/ghash-ce - implement 4-way aggregation
crypto: arm64/ghash-ce - replace NEON yield check with block limit
crypto: hisilicon - sec_send_request() can be static
lib/mpi: remove redundant variable esign
crypto: arm64/aes-ce-gcm - don't reload key schedule if avoidable
crypto: arm64/aes-ce-gcm - implement 2-way aggregation
crypto: arm64/aes-ce-gcm - operate on two input blocks at a time
crypto: dh - make crypto_dh_encode_key() make robust
crypto: dh - fix calculating encoded key size
crypto: ccp - Check for NULL PSP pointer at module unload
crypto: arm/chacha20 - always use vrev for 16-bit rotates
crypto: ccree - allow bigger than sector XTS op
crypto: ccree - zero all of request ctx before use
crypto: ccree - remove cipher ivgen left overs
crypto: ccree - drop useless type flag during reg
crypto: ablkcipher - fix crash flushing dcache in error path
crypto: blkcipher - fix crash flushing dcache in error path
crypto: skcipher - fix crash flushing dcache in error path
crypto: skcipher - remove unnecessary setting of walk->nbytes
crypto: scatterwalk - remove scatterwalk_samebuf()
...
|
|
Make vp_set_vq_affinity() take a cpumask instead of taking a single CPU.
If there are fewer queues than cores, queue affinity should be able to
map to multiple cores.
Link: https://patchwork.ozlabs.org/patch/948149/
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Caleb Raitto <caraitto@google.com>
Acked-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__virtio_crypto_ablkcipher_do_req()
__virtio_crypto_ablkcipher_do_req() is never called in atomic context.
__virtio_crypto_ablkcipher_do_req() is only called by
virtio_crypto_ablkcipher_crypt_req(), which is only called by
virtcrypto_find_vqs() that is never called in atomic context.
__virtio_crypto_ablkcipher_do_req() calls kzalloc_node() with GFP_ATOMIC,
which is not necessary.
GFP_ATOMIC can be replaced with GFP_KERNEL.
This is found by a static analysis tool named DCNS written by myself.
I also manually check the kernel code before reporting it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Register a crypto algo with the Linux crypto layer only if
the algorithm is supported by the backend virtio-crypto
device.
Also route crypto requests to a virtio-crypto
device, only if it can support the requested service and
algorithm.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Read the crypto services and algorithm masks which provides
information about the services and algorithms supported by
virtio-crypto backend.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The kzalloc_node() function has a 2-factor argument form, kcalloc_node(). This
patch replaces cases of:
kzalloc_node(a * b, gfp, node)
with:
kcalloc_node(a * b, gfp, node)
as well as handling cases of:
kzalloc_node(a * b * c, gfp, node)
with:
kzalloc_node(array3_size(a, b, c), gfp, node)
as it's slightly less ugly than:
kcalloc_node(array_size(a, b), c, gfp, node)
This does, however, attempt to ignore constant size factors like:
kzalloc_node(4 * 1024, gfp, node)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kzalloc_node(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kzalloc_node(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kzalloc_node(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc_node(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc_node(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kzalloc_node(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kzalloc_node(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kzalloc_node(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kzalloc_node(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kzalloc_node(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kzalloc_node
+ kcalloc_node
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc_node
+ kcalloc_node
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc_node
+ kcalloc_node
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc_node
+ kcalloc_node
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc_node
+ kcalloc_node
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc_node
+ kcalloc_node
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc_node
+ kcalloc_node
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kzalloc_node
+ kcalloc_node
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kzalloc_node
+ kcalloc_node
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kzalloc_node(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc_node(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc_node(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc_node(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc_node(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc_node(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc_node(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc_node(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kzalloc_node(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc_node(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc_node(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc_node(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc_node(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kzalloc_node(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kzalloc_node(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc_node(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc_node(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc_node(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc_node(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc_node(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc_node(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc_node(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kzalloc_node(C1 * C2 * C3, ...)
|
kzalloc_node(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc_node(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc_node(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc_node(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kzalloc_node(sizeof(THING) * C2, ...)
|
kzalloc_node(sizeof(TYPE) * C2, ...)
|
kzalloc_node(C1 * C2 * C3, ...)
|
kzalloc_node(C1 * C2, ...)
|
- kzalloc_node
+ kcalloc_node
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc_node
+ kcalloc_node
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc_node
+ kcalloc_node
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kzalloc_node
+ kcalloc_node
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kzalloc_node
+ kcalloc_node
(
- (E1) * E2
+ E1, E2
, ...)
|
- kzalloc_node
+ kcalloc_node
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kzalloc_node
+ kcalloc_node
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
virtio_crypto does not use function crypto_authenc_extractkeys, remove
this unnecessary dependency. Compiles fine and passes cryptodev-linux
cipher and speed tests from https://wiki.qemu.org/Features/VirtioCrypto
Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch convert the driver to the new crypto engine API.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In current virtio crypto device driver, some common data structures and
implementations that should be used by other virtio crypto algorithms
(e.g. asymmetric crypto algorithms) introduce symmetric crypto algorithms
specific implementations.
This patch refactors these pieces of code so that they can be reused by
other virtio crypto algorithms.
Acked-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|