Age | Commit message (Collapse) | Author | Files | Lines |
|
Due to a typo, the check of whether or not a memdev has already been
used as a target for the region (above code piece) will always be
skipped. Given a memdev with more than one HDM decoder, an interleaved
region can be created that maps multiple HPAs to the same DPA. According
to CXL spec 3.0 8.1.3.8.4, "Aliasing (mapping more than one Host
Physical Address (HPA) to a single Device Physical Address) is
forbidden."
Fix this by using existing iterator for memdev reuse check.
Cc: <stable@vger.kernel.org>
Fixes: 384e624bb211 ("cxl/region: Attach endpoint decoders")
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/20221107212153.745993-1-fan.ni@samsung.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
readl() already handles endian conversion. That's the main difference
between readl() and __raw_readl(). This is benign on little-endian
systems, but big endian systems will end up byte-swabbing twice.
Fixes: 2905cb5236cb ("cxl/pci: Add (hopeful) error handling support")
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/167030092025.4045167.10651070153523351093.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The first argument to the CXL AER trace points is the source device.
Pass a 'const struct device *' rather than a 'const char *' for more
type precision / safety.
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/167030091477.4045167.15174636482098463885.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
CXL PMEM security operations are routed through the NVDIMM sysfs
interface. For this reason the corresponding commands are marked
"exclusive" to preclude collisions between the ioctl ABI and the sysfs
ABI. However, a better way to preclude that collision is to simply
remove the ioctl ABI (command-id definitions) for those operations.
Now that cxl_internal_send_cmd() (formerly cxl_mbox_send_cmd()) no
longer needs to talk the cxl_mem_commands array, all of the uapi
definitions for the security commands can be dropped.
These never appeared in a released kernel, so no regression risk.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/167030056464.4044561.11486507095384253833.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
cxl_internal_send_cmd() skips output size validation for variable output
commands which is not ideal. Most of the time internal usages want to
fail if the output size does not match what was requested. For other
commands where the caller cannot predict the size there is usually a
a header that conveys how much vaild data is in the payload. For those
cases add @min_out as a parameter to specify what the minimum response
payload needs to be for the caller to parse the rest of the payload.
In this patch only Get Supported Logs has that behavior, but going
forward records retrieval commands like Get Poison List and Get Event
Records can use @min_out to retrieve a variable amount of records.
Critically, this validation scheme skips the needs to interrogate the
cxl_mem_commands array which in turn frees up the implementation to
support internal command enabling without also enabling external / user
commands.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/167030055918.4044561.10339573829837910505.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Internally cxl_mbox_send_cmd() converts all passed-in parameters to a
'struct cxl_mbox_cmd' instance and sends that to cxlds->mbox_send(). It
then teases the possibilty that the caller can validate the output size.
However, they cannot since the resulting output size is not conveyed to
the called. Fix that by making the caller pass in a constructed 'struct
cxl_mbox_cmd'. This prepares for a future patch to add output size
validation on a per-command basis.
Given the change in signature, also change the name to differentiate it
from the user command submission path that performs more validation
before generating the 'struct cxl_mbox_cmd' instance to execute.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/167030055370.4044561.17788093375112783036.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Multi-byte integer values in CXL mailbox payloads are little endian. Add
a definition of the Get Security State output payload and convert the
value before testing flags.
Fixes: 328281155539 ("cxl/pmem: Introduce nvdimm_security_ops with ->get_flags() operation")
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/167030054822.4044561.4917796262037689553.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Change names for interleave ways macros to clearly indicate which
variable is encoded and which is the actual ways value.
ways == interleave ways
eiw == encoded interleave ways
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167027516228.3124679.11265039496968588580.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Change names for granularity macros to clearly indicate which
variable is encoded and which is the actual granularity.
granularity == interleave granularity
eig == encoded interleave granularity
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167027493237.3124429.8948852388671827664.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
After parsing for a CHBCR in cxl_get_chbcr() the case of (ctx.chbcr ==
CXL_RESOURCE_NONE) is a slighly different error reason than the
!ctx.chbcr case. In the first case the CHBS was found but the CHBCR
was invalid or something else failed to determine it, while in the
latter case no CHBS entry exists at all.
Update the warning message to reflect this. The log messages for both
cases can be differentiated now and the reason for a failure can be
determined better.
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167027170051.3542509.10494781536638424397.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The BIOS provided CXIMS (CXL XOR Interleave Math Structure) is required
for calculating a targets position in an interleave list during region
creation. The CXL driver expects to discover a CXIMS that matches the
HBIG (Host Bridge Interleave Granularity) and stores the xormaps found
in that CXIMS for retrieval during region creation.
If there is no CXIMS for an HBIG, no maps are stored. That leads to a
NULL pointer dereference at xormap retrieval during region creation.
Add a check during ACPI probe for the case of no matching CXIMS. Emit
an error message and fail to add the decoder.
Fixes: f9db85bfec0d ("cxl/acpi: Support CXL XOR Interleave Math (CXIMS)")
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221205002951.1788783-1-alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
There is a spelling mistake in a dev_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221205091819.1943564-1-colin.i.king@gmail.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The 0day robot belatedly points out that @addr is not properly tagged as
an iomap pointer:
"drivers/cxl/core/regs.c:332:14: sparse: sparse: incorrect type in
assignment (different address spaces) @@ expected void *addr @@
got void [noderef] __iomem * @@"
Fixes: 1168271ca054 ("cxl/acpi: Extract component registers of restricted hosts from RCRB")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/167008768190.2516013.11918622906007677341.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Pick up support for "XOR" interleave math when parsing ACPI CFMWS window
structures. Fix up conflicts with the RCH emulation already pending in
cxl/next.
|
|
Pick up CXL AER handling and correctable error extensions. Resolve
conflicts with cxl_pmem_wq reworks and RCH support.
|
|
Pick CXL PMEM security commands for v6.2. Resolve conflicts with the
removal of the cxl_pmem_wq.
|
|
Unlike a CXL memory expander in a VH topology that has at least one
intervening 'struct cxl_port' instance between itself and the CXL root
device, an RCD attaches one-level higher. For example:
VH
┌──────────┐
│ ACPI0017 │
│ root0 │
└─────┬────┘
│
┌─────┴────┐
│ dport0 │
┌─────┤ ACPI0016 ├─────┐
│ │ port1 │ │
│ └────┬─────┘ │
│ │ │
┌──┴───┐ ┌──┴───┐ ┌───┴──┐
│dport0│ │dport1│ │dport2│
│ RP0 │ │ RP1 │ │ RP2 │
└──────┘ └──┬───┘ └──────┘
│
┌───┴─────┐
│endpoint0│
│ port2 │
└─────────┘
...vs:
RCH
┌──────────┐
│ ACPI0017 │
│ root0 │
└────┬─────┘
│
┌───┴────┐
│ dport0 │
│ACPI0016│
└───┬────┘
│
┌────┴─────┐
│endpoint0 │
│ port1 │
└──────────┘
So arrange for endpoint port in the RCH/RCD case to appear directly
connected to the host-bridge in its singular role as a dport. Compare
that to the VH case where the host-bridge serves a dual role as a
'cxl_dport' for the CXL root device *and* a 'cxl_port' upstream port for
the Root Ports in the Root Complex that are modeled as 'cxl_dport'
instances in the CXL topology.
Another deviation from the VH case is that RCDs may need to look up
their component registers from the Root Complex Register Block (RCRB).
That platform firmware specified RCRB area is cached by the cxl_acpi
driver and conveyed via the host-bridge dport to the cxl_mem driver to
perform the cxl_rcrb_to_component() lookup for the endpoint port
(See 9.11.8 CXL Devices Attached to an RCH for the lookup of the
upstream port component registers).
Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993045621.1882361.1730100141527044744.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Camerom <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
tl;dr: Clean up an unnecessary export and enable cxl_test.
An RCD (Restricted CXL Device), in contrast to a typical CXL device in
a VH topology, obtains its component registers from the bottom half of
the associated CXL host bridge RCRB (Root Complex Register Block). In
turn this means that cxl_rcrb_to_component() needs to be called from
devm_cxl_add_endpoint().
Presently devm_cxl_add_endpoint() is part of the CXL core, but the only
user is the CXL mem module. Move it from cxl_core to cxl_mem to not only
get rid of an unnecessary export, but to also enable its call out to
cxl_rcrb_to_component(), in a subsequent patch, to be mocked by
cxl_test. Recall that cxl_test can only mock exported symbols, and since
cxl_rcrb_to_component() is itself inside the core, all callers must be
outside of cxl_core to allow cxl_test to mock it.
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993045072.1882361.13944923741276843683.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When the CFMWS is using XOR math, parse the corresponding
CXIMS structure and store the xormaps in the root decoder
structure. Use the xormaps in a new lookup, cxl_hb_xor(),
to find a targets entry in the host bridge interleave
target list.
Defined in CXL Specfication 3.0 Section: 9.17.1
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/5794813acdf7b67cfba3609c6aaff46932fa38d0.1669847017.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add AER error handler callback to read the RAS capability structure
correctable error (CE) status register for the CXL device. Log the
error as a trace event and clear the error. For CXL devices, the driver
also needs to write back to the status register to clear the
unmasked correctable errors.
See CXL spec rev3.0 8.2.4.16 for RAS capability structure CE Status
Register.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166985287203.2871899.13605149073500556137.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add nominal error handling that tears down CXL.mem in response to error
notifications that imply a device reset. Given some CXL.mem may be
operating as System RAM, there is a high likelihood that these error
events are fatal. However, if the system survives the notification the
expectation is that the driver behavior is equivalent to a hot-unplug
and re-plug of an endpoint.
Note that this does not change the mask values from the default. That
awaits CXL _OSC support to determine whether platform firmware is in
control of the mask registers.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974413966.1608150.15522782911404473932.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add tracepoint events for recording the CXL uncorrectable and correctable
errors. For uncorrectable errors, there is additional data of 512B from
the header log register (CXL spec rev3 8.2.4.16.7). The trace event will
intake a dynamic array that will dump the entire Header Log data. If
multiple errors are set in the status register, then the
'first error' field (CXL spec rev3 v8.2.4.16.6) is read from the Error
Capabilities and Control Register in order to determine the error.
This implementation does not include CXL IDE Error details.
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/166974413388.1608150.5875712482260436188.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The RAS Capability Structure has some ancillary information that may be
relevant with respect to AER events, link and protcol error status
registers. Map the RAS Capability Registers in support of defining a
'struct pci_error_handlers' instance for the cxl_pci driver.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974412803.1608150.7096566580400947001.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The RAS Capabilitiy Structure is a CXL Component register capability
block. Unlike the HDM Decoder Capability, it will be referenced by the
cxl_pci driver in response to PCIe AER events. Due to this it is no
longer the case that cxl_map_component_regs() can assume that it should
map all component registers. Plumb a bitmask of capability ids to map
through cxl_map_component_regs().
For symmetry cxl_probe_device_regs() is updated to populate @id in
'struct cxl_reg_map' even though cxl_map_device_regs() does not have a
need to map a subset of the device registers per caller.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974412214.1608150.11487843455070795378.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Update the port driver to use cxl_map_component_registers() so that the
component register block can be shared between the cxl_pci driver and
the cxl_port driver. I.e. stop the port driver from reserving the entire
component register block for itself via request_region() when it only
needs the HDM Decoder Capability subset.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974411625.1608150.7149373371599960307.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
There is no need to carry the barno and the block offset through the
stack, just convert them to a resource base immediately.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974411035.1608150.8605988708101648442.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The component registers are currently unused by the cxl_pci driver.
Only the physical address base of the component registers is conveyed to
the cxl_mem driver. Just call cxl_map_device_registers() directly.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974410443.1608150.15855499736133349600.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Use a loop to reduce the duplicated code in cxl_map_device_regs(). This
is in preparation for deleting cxl_map_regs().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974409867.1608150.14886452053935226038.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Rather then duplicating the setting of valid, length, and offset for
each type, just convey a pointer to the register map to common code.
Yes, the change in cxl_probe_component_regs() does not save
any lines of code, but it is preparation for adding another component
register type to map (RAS Capability Structure).
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974409293.1608150.17661353937678581423.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
A downstream port must be connected to a component register block.
For restricted hosts the base address is determined from the RCRB. The
RCRB is provided by the host's CEDT CHBS entry. Rework CEDT parser to
get the RCRB and add code to extract the component register block from
it.
RCRB's BAR[0..1] point to the component block containing CXL subsystem
component registers. MEMBAR extraction follows the PCI base spec here,
esp. 64 bit extraction and memory range alignment (6.0, 7.5.1.2.1). The
RCRB base address is cached in the cxl_dport per-host bridge so that the
upstream port component registers can be retrieved later by an RCD
(RCIEP) associated with the host bridge.
Note: Right now the component register block is used for HDM decoder
capability only which is optional for RCDs. If unsupported by the RCD,
the HDM init will fail. It is future work to bypass it in this case.
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/Y4dsGZ24aJlxSfI1@rric.localdomain
[djbw: introduce devm_cxl_add_rch_dport()]
Link: https://lore.kernel.org/r/166993044524.1882361.2539922887413208807.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
A "DPA invalidation event" is any scenario where the contents of a DPA
(Device Physical Address) is modified in a way that is incoherent with
CPU caches, or if the HPA (Host Physical Address) to DPA association
changes due to a remapping event.
PMEM security events like Unlock and Passphrase Secure Erase already
manage caches through LIBNVDIMM, so that leaves HPA to DPA remap events
that need cache management by the CXL core. Those only happen when the
boot time CXL configuration has changed. That event occurs when
userspace attaches an endpoint decoder to a region configuration, and
that region is subsequently activated.
The implications of not invalidating caches between remap events is that
reads from the region at different points in time may return different
results due to stale cached data from the previous HPA to DPA mapping.
Without a guarantee that the region contents after cxl_region_probe()
are written before being read (a layering-violation assumption that
cxl_region_probe() can not make) the CXL subsystem needs to ensure that
reads that precede writes see consistent results.
A CONFIG_CXL_REGION_INVALIDATION_TEST option is added to support debug
and unit testing of the CXL implementation in QEMU or other environments
where cpu_cache_has_invalidate_memregion() returns false. This may prove
too restrictive for QEMU where the HDM decoders are emulated, but in
that case the CXL subsystem needs some new mechanism / indication that
the HDM decoder is emulated and not a passthrough of real hardware.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166993222098.1995348.16604163596374520890.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Preclude the possibility of user tooling sending device secrets in the
clear into the kernel by marking the security commands as exclusive.
This mandates the usage of the keyctl ABI for managing the device
passphrase.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/166993221008.1995348.11651567302609703175.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
cxl_region_probe() allows for regions not in the 'commit' state to be
enabled. Fail probe when the region is not committed otherwise the
kernel may indicate that an address range is active when none of the
decoders are active.
Fixes: 8d48817df6ac ("cxl/region: Add region driver boiler plate")
Cc: <stable@vger.kernel.org>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/166993220462.1995348.1698008475198427361.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Set the cxlds->serial as the dimm_id to be fed to __nvdimm_create(). The
security code uses that as the key description for the security key of the
memory device. The nvdimm unlock code cannot find the respective key
without the dimm_id.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166863357043.80269.4337575149671383294.stgit@djiang5-desk3.ch.intel.com
Link: https://lore.kernel.org/r/166983620459.2734609.10175456773200251184.stgit@djiang5-desk3.ch.intel.com
Link: https://lore.kernel.org/r/166993219918.1995348.10786511454826454601.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
A port of a CXL host bridge links to the bridge's ACPI device
(&adev->dev) with its corresponding uport/dport device (uport_dev and
dport_dev respectively). The device is not a direct parent device in
the PCI topology as pdev->dev.parent points to a PCI bridge's (struct
pci_host_bridge) device. The following CXL memory device hierarchy
would be valid for an endpoint once an RCD EP would be enabled (note
this will be done in a later patch):
VH mode:
cxlmd->dev.parent->parent
^^^\^^^^^^\ ^^^^^^\
\ \ pci_dev (Type 1, Downstream Port)
\ pci_dev (Type 0, PCI Express Endpoint)
cxl mem device
RCD mode:
cxlmd->dev.parent->parent
^^^\^^^^^^\ ^^^^^^\
\ \ pci_host_bridge
\ pci_dev (Type 0, RCiEP)
cxl mem device
In VH mode a downstream port is created by port enumeration and thus
always exists.
Now, in RCD mode the host bridge also already exists but it references
to an ACPI device. A port lookup by the PCI device's parent device
will fail as a direct link to the registered port is missing. The ACPI
device of the bridge must be determined first.
To prevent this, change port registration of a CXL host to use the
bridge device instead. Do this also for the VH case as port topology
will better reflect the PCI topology then.
Signed-off-by: Robert Richter <rrichter@amd.com>
[djbw: rebase on brige mocking]
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166993043978.1882361.16238060349889579369.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Accept any cxl_test topology device as the first argument in
cxl_chbs_context.
This is in preparation for reworking the detection of the component
registers across VH and RCH topologies. Move
mock_acpi_table_parse_cedt() beneath the definition of is_mock_port()
and use is_mock_port() instead of the explicit mock cxl_acpi device
check.
Acked-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166993043433.1882361.17651413716599606118.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Now that the cxl_mem driver has a need to take the root device lock, the
cxl_bus_rescan() needs to run outside of the root lock context. That
need arises from RCH topologies and the locking that the cxl_mem driver
does to attach a descendant to an upstream port. In the RCH case the
lock needed is the CXL root device lock [1].
Link: http://lore.kernel.org/r/166993045621.1882361.1730100141527044744.stgit@dwillia2-xfh.jf.intel.com [1]
Tested-by: Robert Richter <rrichter@amd.com>
Link: http://lore.kernel.org/r/166993042884.1882361.5633723613683058881.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Now that cxl_nvdimm and cxl_pmem_region objects are torn down
sychronously with the removal of either the bridge, or an endpoint, the
cxl_pmem_wq infrastructure can be jettisoned.
Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993042335.1882361.17022872468068436287.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The three objects 'struct cxl_nvdimm_bridge', 'struct cxl_nvdimm', and
'struct cxl_pmem_region' manage CXL persistent memory resources. The
bridge represents base platform resources, the nvdimm represents one or
more endpoints, and the region is a collection of nvdimms that
contribute to an assembled address range.
Their relationship is such that a region is torn down if any component
endpoints are removed. All regions and endpoints are torn down if the
foundational bridge device goes down.
A workqueue was deployed to manage these interdependencies, but it is
difficult to reason about, and fragile. A recent attempt to take the CXL
root device lock in the cxl_mem driver was reported by lockdep as
colliding with the flush_work() in the cxl_pmem flows.
Instead of the workqueue, arrange for all pmem/nvdimm devices to be torn
down immediately and hierarchically. A similar change is made to both
the 'cxl_nvdimm' and 'cxl_pmem_region' objects. For bisect-ability both
changes are made in the same patch which unfortunately makes the patch
bigger than desired.
Arrange for cxl_memdev and cxl_region to register a cxl_nvdimm and
cxl_pmem_region as a devres release action of the bridge device.
Additionally, include a devres release action of the cxl_memdev or
cxl_region device that triggers the bridge's release action if an endpoint
exits before the bridge. I.e. this allows either unplugging the bridge,
or unplugging and endpoint to result in the same cleanup actions.
To keep the patch smaller the cleanup of the now defunct workqueue
infrastructure is saved for a follow-on patch.
Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993041773.1882361.16444301376147207609.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Now that a cxl_nvdimm object can only experience ->remove() via an
unregistration event (because the cxl_nvdimm bind attributes are
suppressed), additional cleanups are possible.
It is already the case that the removal of a cxl_memdev object triggers
->remove() on any associated region. With that mechanism in place there
is no need for the cxl_nvdimm removal to trigger the same. Just rely on
cxl_region_detach() to tear down the whole cxl_pmem_region.
Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993041215.1882361.6321535567798911286.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The 'struct cxl_nvdimm_bridge' object advertises platform CXL PMEM
resources. It coordinates with libnvdimm to attach nvdimm devices and
regions for each corresponding CXL object. That coordination is
complicated, i.e. difficult to reason about, and it turns out redundant.
It is already the case that the CXL core knows how to tear down a
cxl_region when a cxl_memdev goes through ->remove(), so that pathway
can be extended to directly cleanup cxl_nvdimm and cxl_pmem_region
objects.
Towards the goal of ripping out the cxl_nvdimm_bridge state machine,
arrange for cxl_acpi to optionally pre-load the cxl_pmem driver so that
the nvdimm bridge is active synchronously with
devm_cxl_add_nvdimm_bridge(), and remove all the bind attributes for the
cxl_nvdimm* objects since the cxl root device and cxl_memdev bind
attributes are sufficient.
Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993040668.1882361.7450361097265836752.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add provider name in order to associate cxl test dimm from cxl_test to the
cxl pmem device when going through sysfs for security testing.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983618174.2734609.15600031015423828810.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add an id group attribute for CXL based nvdimm object. The addition allows
ndctl to display the "unique id" for the nvdimm. The serial number for the
CXL memory device will be used for this id.
[
{
"dev":"nmem10",
"id":"0x4",
"security":"disabled"
},
]
The id attribute is needed by the ndctl security key management to setup a
keyblob with a unique file name tied to the mem device.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983617029.2734609.8251308562882142281.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The original nvdimm_security_ops ->disable() only supports user passphrase
for security disable. The CXL spec introduced the disabling of master
passphrase. Add a ->disable_master() callback to support this new operation
and leaving the old ->disable() mechanism alone. A "disable_master" command
is added for the sysfs attribute in order to allow command to be issued
from userspace. ndctl will need enabling in order to utilize this new
operation.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983616454.2734609.14204031148234398086.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create callback function to support the nvdimm_security_ops() ->erase()
callback. Translate the operation to send "Passphrase Secure Erase"
security command for CXL memory device.
When the mem device is secure erased, cpu_cache_invalidate_memregion() is
called in order to invalidate all CPU caches before attempting to access
the mem device again.
See CXL 3.0 spec section 8.2.9.8.6.6 for reference.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983615293.2734609.10358657600295932156.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create callback function to support the nvdimm_security_ops() ->unlock()
callback. Translate the operation to send "Unlock" security command for CXL
mem device.
When the mem device is unlocked, cpu_cache_invalidate_memregion() is called
in order to invalidate all CPU caches before attempting to access the mem
device.
See CXL rev3.0 spec section 8.2.9.8.6.4 for reference.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983614167.2734609.15124543712487741176.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create callback function to support the nvdimm_security_ops() ->freeze()
callback. Translate the operation to send "Freeze Security State" security
command for CXL memory device.
See CXL rev3.0 spec section 8.2.9.8.6.5 for reference.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983613019.2734609.10645754779802492122.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create callback function to support the nvdimm_security_ops ->disable()
callback. Translate the operation to send "Disable Passphrase" security
command for CXL memory device. The operation supports disabling a
passphrase for the CXL persistent memory device. In the original
implementation of nvdimm_security_ops, this operation only supports
disabling of the user passphrase. This is due to the NFIT version of
disable passphrase only supported disabling of user passphrase. The CXL
spec allows disabling of the master passphrase as well which
nvidmm_security_ops does not support yet. In this commit, the callback
function will only support user passphrase.
See CXL rev3.0 spec section 8.2.9.8.6.3 for reference.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983611878.2734609.10602135274526390127.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create callback function to support the nvdimm_security_ops ->change_key()
callback. Translate the operation to send "Set Passphrase" security command
for CXL memory device. The operation supports setting a passphrase for the
CXL persistent memory device. It also supports the changing of the
currently set passphrase. The operation allows manipulation of a user
passphrase or a master passphrase.
See CXL rev3.0 spec section 8.2.9.8.6.2 for reference.
However, the spec leaves a gap WRT master passphrase usages. The spec does
not define any ways to retrieve the status of if the support of master
passphrase is available for the device, nor does the commands that utilize
master passphrase will return a specific error that indicates master
passphrase is not supported. If using a device does not support master
passphrase and a command is issued with a master passphrase, the error
message returned by the device will be ambiguous.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983610751.2734609.4445075071552032091.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add nvdimm_security_ops support for CXL memory device with the introduction
of the ->get_flags() callback function. This is part of the "Persistent
Memory Data-at-rest Security" command set for CXL memory device support.
The ->get_flags() function provides the security state of the persistent
memory device defined by the CXL 3.0 spec section 8.2.9.8.6.1.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983609611.2734609.13231854299523325319.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|