| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add HDMA DebugFS support to show registers content
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230520050854.73160-5-cai.huoqing@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for HDMA NATIVE, as long the IP design has set
the compatible register map parameter-HDMA_NATIVE,
which allows compatibility for native HDMA register configuration.
The HDMA Hyper-DMA IP is an enhancement of the eDMA embedded-DMA IP.
And the native HDMA registers are different from eDMA, so this patch
add support for HDMA NATIVE mode.
HDMA write and read channels operate independently to maximize
the performance of the HDMA read and write data transfer over
the link When you configure the HDMA with multiple read channels,
then it uses a round robin (RR) arbitration scheme to select
the next read channel to be serviced.The same applies when you
have multiple write channels.
The native HDMA driver also supports a maximum of 16 independent
channels (8 write + 8 read), which can run simultaneously.
Both SAR (Source Address Register) and DAR (Destination Address Register)
are aligned to byte.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230520050854.73160-4-cai.huoqing@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
controller operation
The structure dw_edma_core_ops has a set of the pointers
abstracting out the DW eDMA vX and DW HDMA Native controllers.
And use dw_edma_v0_core_register to set up operation.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230520050854.73160-3-cai.huoqing@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The dw_edma_core_ops structure contains a set of the operations:
device IRQ numbers getter, CPU/PCI address translation. Based on the
functions semantics the structure name "dw_edma_plat_ops" looks more
descriptive since indeed the operations are platform-specific. The
"dw_edma_core_ops" name shall be used for a structure with the IP-core
specific set of callbacks in order to abstract out DW eDMA and DW HDMA
setups. Such structure will be added in one of the next commit in the
framework of the set of changes adding the DW HDMA device support.
Anyway the renaming was necessary to distinguish two types of
the implementation callbacks:
1. DW eDMA/hDMA IP-core specific operations: device-specific CSR
setups in one or another aspect of the DMA-engine initialization.
2. DW eDMA/hDMA platform specific operations: the DMA device
environment configs like IRQs, address translation, etc.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230520050854.73160-2-cai.huoqing@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The issue_pending request is ignored while driver is processing a DMA
request. Fix to issue the pending requests on any dma channel status.
Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-2-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The dw-edma driver stops after processing a DMA request even if a request
remains in the issued queue, which is not the expected behavior. The DMA
engine API requires continuous processing.
Add a trigger to start after one processing finished if there are requests
remain.
Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-1-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
clang with W=1 reports
drivers/dma/dw-edma/dw-edma-v0-core.c:162:20: error:
unused function 'writeq_ch' [-Werror,-Wunused-function]
static inline void writeq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
^
drivers/dma/dw-edma/dw-edma-v0-core.c:185:19: error:
unused function 'readq_ch' [-Werror,-Wunused-function]
static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
^
These functions and their wrapping macros are not used, so remove them.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230320234906.1730308-1-trix@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Kconfig "select" is discouraged for visible symbols like DW_EDMA because it
makes it possible to set DW_EDMA even if DW_EDMA depends on things that are
not set (see Documentation/kbuild/kconfig-language.txt).
Convert DW_EDMA_PCIE so it depends on DW_EDMA instead of selecting it.
There will likely be several future drivers that depend on DW_EDMA, so this
uses "if DW_EDMA" to enclose them all rather than repeating "depends on
DW_EDMA" for each.
[bhelgaas: split to separate patch, commit log]
Link: https://lore.kernel.org/r/20230113171409.30470-25-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently the DW eDMA driver only supports the linked lists memory
allocated locally with respect to the remote eDMA engine setup. It means
the linked lists will be accessible by the CPU via the MMIO space only. If
eDMA is embedded into the DW PCIe Root Ports or local Endpoints (which
support will be added in subsequent commits) the linked lists are supposed
to be allocated in the CPU memory. In that case the LL-entries can be
directly accessed, while the former case implies using the MMIO accessors
for that.
In order to have both cases supported by the driver, the dw_edma_region
descriptor should be fixed to contain the MMIO-backed and just memory-based
virtual addresses. The linked lists initialization procedure will use one
of them depending on the eDMA device nature. If the eDMA engine is embedded
into the local DW PCIe Root Port/Endpoint controllers, the list entries
will be directly accessed by referencing the corresponding structure
fields. Otherwise the MMIO accessors usage will be preserved.
Link: https://lore.kernel.org/r/20230113171409.30470-24-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
DW eDMA driver private data is preserved in the passed DW eDMA chip info
structure. If the probe fails or for some reason the passed info object
doesn't have the private data pointer initialized, halt the DMA device
cleanup procedure to prevent system crashes.
Link: https://lore.kernel.org/r/20230113171409.30470-23-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Using an abstract number as the DW eDMA chip identifier isn't practical
because there can be more than one DW eDMA controller on the platform. Some
may be detected as the PCIe Endpoints, and others may be embedded in DW
PCIe Root Port/Endpoint controllers. An abstract number in, for instance,
the IRQ handlers list, doesn't give a notion regarding their reference to
the particular DMA controller.
To preserve the code simplicity and support multi-eDMA platforms, use the
parental device name to create the DW eDMA controller name.
Link: https://lore.kernel.org/r/20230113171409.30470-22-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
There is no point in allocating additional memory for the data target
regions passed to the client drivers. Use the already available structures
defined in the dw_edma_chip instance.
Note: these regions are unused in normal circumstances since they are
specific to the case of eDMA being embedded into the DW PCIe Endpoint and
having its CSRs accessible via an Endpoint BAR. This case is only known to
be implemented as a part of the Synopsys PCIe Endpoint IP prototype kit.
Link: https://lore.kernel.org/r/20230113171409.30470-21-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of splitting 64-bits IOs up into two 32-bits ones, use the existing
non-atomic readq()/writeq() functions. By doing so we can discard
CONFIG_64BIT #ifdefs from the code.
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Previously, readq_ch() did a 64-bit readq(), but truncated the result by
storing it in the u32 "value". Change "value" to u64 to avoid the
truncation.
Note: the method is currently unused, so the bug hasn't caused any problem
so far.
Fixes: 04e0a39fc10f ("dmaengine: dw-edma: Add writeq() and readq() for 64 bits architectures")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Since all DW eDMA read and write channels are now installed in a framework
of a single DMA engine device, move all the DW eDMA-specific debugfs nodes
into a ready-to-use DMA-engine debugfs subdirectory. It's created during
the DMA-device registration and can be found in the dma_device.dbg_dev_root
field.
Link: https://lore.kernel.org/r/20230113171409.30470-19-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
There is no point in splitting read/write channels. First of all, eDMA
read and write channels belong to one physical controller. Secondly,
channel differentiation can be done by filtering and dma_get_slave_caps().
Finally, having these channels handled separately needlessly complicates
the code and causes this debugfs warning:
debugfs: Directory '1f052000.pcie' with parent 'dmaengine' already present!
Join the read/write channels into a single DMA device. Client drivers can
choose the correct channel via the DMA slave direction setting. The default
value is overridden by the dw_edma_device_caps() callback in accordance
with the channel type.
Link: https://lore.kernel.org/r/20230113171409.30470-18-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The last thing that stops the debugfs part of the eDMA driver from
supporting multi-eDMA platforms is keeping the eDMA private data pointer in
the static area of the debugfs module. Since the debugfs node descriptors
are now heap-allocated, we can freely move that pointer to being preserved
in the descriptors. After the debugfs initialization procedure, that
pointer will be used in the debugfs files getter to access the common CSRs
space and the context CSRs spinlock. So the main part of this change is
connected with the debugfs nodes descriptors initialization macros, which
aside with already defined prototypes now require to have the DW eDMA
private data pointer passed.
[bhelgaas: squash in https://lore.kernel.org/r/20230130185101.2883245-1-arnd@kernel.org]
Link: https://lore.kernel.org/r/20230113171409.30470-17-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
DW eDMA v4.70a and older have the read and write channels context CSRs
indirectly accessible, which means CSRs like Channel Control, Xfer size,
SAR, DAR and LLP address are accessed at a fixed MMIO address, with their
reference to the corresponding channel determined by the Viewport CSR. To
have a coherent access to these registers the CSR IOs are supposed to be
protected with a spinlock. DW eDMA v4.80a and newer normally have unrolled
Read/Write channel context registers, with these CSRs directly mapped in
the controller MMIO space.
Both normal and viewport-based registers are exposed via debugfs nodes, and
the original algorithm was based on the unrolled CSRs mapping and
recalculated the viewport addresses when required. This is unscalable (it
only supports a platform with a single eDMA since a base address is
statically preserved) and also needlessly overcomplicated (it loops over
all Rd/Wr context addresses and recalculates the viewport base address on
each debugfs node access).
Simplify the algorithm by adding the channel ID and its direction fields in
the eDMA debugfs node descriptor. These new fields can be used to find a
CSR offset in the channel register space. The DW eDMA debugfs node getter
will also use them to activate the respective context CSRs viewport before
reading data from the specified register. For the unrolled CSR mapping, no
spinlock or viewport activation is needed.
Note: this replaces some REGISTER() uses with CTX_REGISTER(), which avoids
an implicit dependency on a local variable name. The same problem with the
rest of the macro will be fixed in the next commit.
Link: https://lore.kernel.org/r/20230113171409.30470-16-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Since we are about to add the eDMA channels direction support to the
debugfs module it will be confusing to have both the debugfs directory and
the channels direction short names used in the same code.
Rename the debugfs dentry 'dir' variables to 'dent' to prevent confusion.
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230113171409.30470-15-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently DW eDMA debugfs node descriptors are allocated on the stack,
which won't work for multi-eDMA platforms. As a preparation to supporting
multi-eDMA systems, allocate each debugfs node separately. Afterwards
we'll add info like Read/Write channel flag, channel ID, DW eDMA private
data reference.
Note: this conversion is mainly required due to having the legacy DW eDMA
controllers with indirect Read/Write channels context CSRs access. If we
didn't need to synchronize access to these registers, the debugfs code of
the driver would have been much simpler.
Link: https://lore.kernel.org/r/20230113171409.30470-14-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Other local names include a "dw_edma" prefix.
Add a "dw_edma" prefix to the debugfs_entries structure, too, so it won't
be confused with global debugfs things.
Link: https://lore.kernel.org/r/20230113171409.30470-13-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The debugfs_create_*() functions never return NULL, so checking their
return value for NULL is pointless. Secondly, the debugfs subsystem is
designed to be as simple as possible, so if one of the debugfs_create_*()
method in a hierarchy fails, the following methods should silently return
the passed erroneous parental dentry. Finally, the code should work no
matter whether anything debugfs-related fails.
To make code simpler and debugfs-independent, stop checking the
debugfs_create_*() return values.
If the debugfs file system is unavailable, skip the debugfs node
initialization altogether to preserve some memory space.
Link: https://lore.kernel.org/r/20230113171409.30470-12-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The debugfs_entries structure declared in dw-edma-v0-debugfs.c contains the
debugfs node register address. The address is declared as dma_addr_t type,
but is cast to "void *".
Change the type to "void __iomem *" and drop the unnecessary casts.
Link: https://lore.kernel.org/r/20230113171409.30470-11-Sergey.Semin@baikalelectronics.ru
Fixes: 305aebeff879 ("dmaengine: Add Synopsys eDMA IP version 0 debugfs support")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The DMA engine core manages dma_device.chancnt itself, e.g., in
dma_async_device_register(). DMA device drivers should not initialize
chancnt because it causes the wrong number of channels printed in the
device summary.
Drop the dw-edma chancnt initialization.
Link: https://lore.kernel.org/r/20230113171409.30470-10-Sergey.Semin@baikalelectronics.ru
Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The Synopsys PCIe Endpoint IP prototype kit can be attached via any PCI
host controller, including one where the PCI bus address space is different
from the CPU address space. Therefore, we need to make sure the source and
destination addresses of the DMA slave devices are converted to the PCI bus
address space; otherwise DMA transactions may cause memory corruption.
Add a new dw_edma_pcie_address() interface to perform this translation by
using pcibios_resource_to_bus().
Link: https://lore.kernel.org/r/20230113171409.30470-9-Sergey.Semin@baikalelectronics.ru
Fixes: 41aaff2a2ac0 ("dmaengine: Add Synopsys eDMA IP PCIe glue-logic")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Since 9575632052ba ("dmaengine: make slave address physical"), the source
and destination addresses of the DMA slave device have been converted to
physical addresses in the CPU address space. It's the DMA device driver's
responsibility to convert them to the DMA bus address space. In case of the
DW eDMA device, the source or destination peripheral (slave) devices reside
in PCI bus space. Thus we need to perform the PCI Host/Endpoint windows-
based (i.e. DT "ranges" property) address translation; otherwise the eDMA
transactions won't work as expected (or can be even harmful) if the CPU and
PCI address spaces don't match.
Note 1: Even though the DMA interleaved template has both source and
destination addresses declared as dma_addr_t, only the CPU memory range
should be mapped to be seen by the DMA device since it's a subject of the
DMA getting towards the system side. The device part must not be mapped
since the slave device resides in the PCI bus space, which isn't affected
by IOMMUs or iATU translations. DW PCIe eDMA generates corresponding
MWr/MRd TLPs on its own.
Note 2: This functionality is mainly required for the remote eDMA setup
since the CPU address must be manually translated into the PCI bus space
before being written to LLI.{SAR,DAR}. If eDMA is embedded in the locally
accessible DW PCIe Root Port/Endpoint, software-based translation isn't
required since hardware will translate it via the Outbound iATU as long as
the DMA_BYPASS flag is cleared. If DMA_BYPASS is set or there is no
Outbound iATU entry that contains the SAR or DAR (for Read and Write
channel respectively), there won't be any translation performed but DMA
will proceed with the corresponding source/destination address as-is.
Link: https://lore.kernel.org/r/20230113171409.30470-8-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The interleaved DMA transfer support added by 85e7518f42c8 ("dmaengine:
dw-edma: Add device_prep_interleave_dma() support") seems contradictory to
what the DMA engine defines. The next conditional statements:
if (!xfer->xfer.il->numf)
return NULL;
if (xfer->xfer.il->numf > 0 && xfer->xfer.il->frame_size > 0)
return NULL;
mean that numf can't be zero and frame_size must always be zero, otherwise
the transfer won't be executed. Furthermore, the transfer execution method
takes the frame size from the dma_interleaved_template.sgl[] array for each
frame. That array in accordance with [1] is supposed to be of
dma_interleaved_template.frame_size size, which as we discovered before the
code expects to be zero. So judging by the dw_edma_device_transfer()
implementation, the method implies the dma_interleaved_template.sgl[] array
being of dma_interleaved_template.numf size, which is wrong. Since the
dw_edma_device_transfer() method doesn't permit
dma_interleaved_template.frame_size being non-zero, the multi-chunk
interleaved transfer turns to be unsupported even though the code implies
having it supported.
Add fully functioning support of interleaved DMA transfers.
First of all, dma_interleaved_template.frame_size is supposed to be greater
or equal to one thus having at least simple linear chunked frames.
Secondly, we can create a walk-through over all the chunks and frames by
initializing the number of the eDMA burst transactions as a multiple of
dma_interleaved_template.numf and dma_interleaved_template.frame_size and
getting the frame_size-modulo of the iteration step as an index of the
dma_interleaved_template.sgl[] array.
[1] include/linux/dmaengine.h: doc struct dma_interleaved_template
Link: https://lore.kernel.org/r/20230113171409.30470-7-Sergey.Semin@baikalelectronics.ru
Fixes: 85e7518f42c8 ("dmaengine: dw-edma: Add device_prep_interleave_dma() support")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The DW eDMA controller always increments both source and destination
addresses. Permitting DMA interleaved transfers with no src_inc/dst_inc
flags set may lead to unexpected behaviour for the device users.
Terminate interleaved transfers if at least one of the
dma_interleaved_template.{src_inc,dst_inc} flag is initialized to "false".
Note that in addition, we need to increase the source and destination
addresses after each iteration.
Link: https://lore.kernel.org/r/20230113171409.30470-6-Sergey.Semin@baikalelectronics.ru
Fixes: 85e7518f42c8 ("dmaengine: dw-edma: Add device_prep_interleave_dma() support")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Interleaved DMA transfer support was added by 85e7518f42c8 ("dmaengine:
dw-edma: Add device_prep_interleave_dma() support"), but depending on the
selected channel, either source or destination address are left
uninitialized which was obviously wrong.
Initialize the destination address of the eDMA burst descriptors for
DEV_TO_MEM interleaved operations and the source address for MEM_TO_DEV
operations.
Link: https://lore.kernel.org/r/20230113171409.30470-5-Sergey.Semin@baikalelectronics.ru
Fixes: 85e7518f42c8 ("dmaengine: dw-edma: Add device_prep_interleave_dma() support")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The dw_edma_region.paddr field should be a memory base address visible by
the DW eDMA controller. If the DMA engine is embedded in the DW PCIe
Host/Endpoint controller, the address should belong to the Local CPU/
Application memory. If eDMA is remotely accessible across the PCI bus via
PCI memory IOs, the address should be part of the PCI bus memory space.
The latter case hasn't been well covered in the corresponding glue-driver.
Since pci_dev.resource[] contains resources defined in the CPU memory
space, they need to be converted to the PCI bus address space. Convert the
LL, DT and CSRs PCI memory ranges with pci_bus_address().
In addition, extend the dw_edma_region.paddr field size. The field normally
contains a memory range base address to be set in the DW eDMA Linked-List
pointer register or as a base address of the Linked-List data buffer. In
accordance with [1] the LL range is supposed to be created in the Local
CPU/Application memory, but depending on the DW eDMA utilization the memory
can be created as a part of the PCI bus address space (as in the case of
the DW PCIe Endpoint prototype kit).
In the former case dw_edma_region.paddr should be a dma_addr_t, while in
the latter one it should be a pci_bus_addr_t. Since the corresponding CSRs
are always 64 bits wide, convert dw_edma_region.paddr to be u64, and let
the client make sure it has a valid address visible by the DW eDMA
controller. For instance, the DW eDMA PCIe glue-driver initializes the
field with addresses from the PCI bus memory space.
[1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
v.5.40a, March 2019, p.1103
Link: https://lore.kernel.org/r/20230113171409.30470-4-Sergey.Semin@baikalelectronics.ru
Fixes: 41aaff2a2ac0 ("dmaengine: Add Synopsys eDMA IP PCIe glue-logic")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
If dw_edma_irq_request() fails to initialize an IRQ handler, any previously
requested IRQs will be left initialized.
Release the previously requested IRQs in the cleanup-on-error path of
dw_edma_irq_request().
Link: https://lore.kernel.org/r/20230113171409.30470-3-Sergey.Semin@baikalelectronics.ru
Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently, the dw-edma driver enables the runtime_pm for parent device
(chip->dev) and increments/decrements the refcount during alloc/free
chan resources callbacks.
This leads to a problem when the eDMA driver has been probed, but the
channels were not used. This scenario can happen when the DW PCIe driver
probes eDMA driver successfully, but the PCI EPF driver decides not to
use eDMA channels and use iATU instead for PCI transfers.
In this case, the underlying device would be runtime suspended due to
pm_runtime_enable() in dw_edma_probe() and the PCI EPF driver would have
no knowledge of it.
Ideally, the eDMA driver should not be the one doing the runtime PM of
the parent device. The responsibility should instead belong to the client
drivers like PCI EPF.
So let's remove the runtime PM support from eDMA driver.
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220910054700.12205-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Consolidate duplicated 'next function' scanning and extend to allow
'isolated functions' on s390, similar to existing hypervisors
(Niklas Schnelle)
Resource management:
- Implement pci_iobar_pfn() for sparc, which allows us to remove the
sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().
This removes the ability to map the entire PCI I/O space using
/proc/bus/pci, but we believe that's already been broken since
v2.6.28 (Arnd Bergmann)
- Move common PCI definitions to asm-generic/pci.h and rework others
to be be more specific and more encapsulated in arches that need
them (Stafford Horne)
Power management:
- Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef
CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)
Virtualization:
- Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate
the functions but don't advertise an ACS capability (Pavan Chebbi)
Error handling:
- Clear PCI Status register during enumeration in case firmware left
errors logged (Kai-Heng Feng)
- When we have native control of AER, enable error reporting for all
devices that support AER. Previously only a few drivers enabled
this (Stefan Roese)
- Keep AER error reporting enabled for switches. Previously we
enabled this during enumeration but immediately disabled it (Stefan
Roese)
- Iterate over error counters instead of error strings to avoid
printing junk in AER sysfs counters (Mohamed Khalfella)
ASPM:
- Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g.,
via sysfs, are not lost across power state changes (Kai-Heng Feng)
Endpoint framework:
- Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)
Endpoint embedded DMA controller driver:
- Simplify and clean up support for the DesignWare embedded DMA
(eDMA) controller (Frank Li, Serge Semin)
Broadcom STB PCIe controller driver:
- Avoid config space accesses when link is down because we can't
recover from the CPU aborts these cause (Jim Quinlan)
- Look for power regulators described under Root Ports in DT and
enable them before scanning the secondary bus (Jim Quinlan)
- Disable/enable regulators in suspend/resume (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Simplify and clean up clock and PHY management (Richard Zhu)
- Disable/enable regulators in suspend/resume (Richard Zhu)
- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)
- Allow speeds faster than Gen2 (Richard Zhu)
- Make link being down a non-fatal error so controller probe doesn't
fail if there are no Endpoints connected (Richard Zhu)
Loongson PCIe controller driver:
- Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)
- Avoid config reads to non-existent LS2K/LS7A devices because a
hardware defect causes machine hangs (Huacai Chen)
- Work around LS7A integrated devices that report incorrect Interrupt
Pin values (Jianmin Lv)
Marvell Aardvark PCIe controller driver:
- Add support for AER and Slot capability on emulated bridge (Pali
Rohár)
MediaTek PCIe controller driver:
- Add Airoha EN7532 to DT binding (John Crispin)
- Allow building of driver for ARCH_AIROHA (Felix Fietkau)
MediaTek PCIe Gen3 controller driver:
- Print decoded LTSSM state when the link doesn't come up (Jianjun
Wang)
NVIDIA Tegra194 PCIe controller driver:
- Convert DT binding to json-schema (Vidya Sagar)
- Add DT bindings and driver support for Tegra234 Root Port and
Endpoint mode (Vidya Sagar)
- Fix some Root Port interrupt handling issues (Vidya Sagar)
- Set default Max Payload Size to 256 bytes (Vidya Sagar)
- Fix Data Link Feature capability programming (Vidya Sagar)
- Extend Endpoint mode support to devices beyond Controller-5 (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Rework clock, reset, PHY power-on ordering to avoid hangs and
improve consistency (Robert Marko, Christian Marangi)
- Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)
- Add IPQ60xx support (Selvam Sathappan Periakaruppan)
- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)
- Add support for more than 32 MSI interrupts (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Convert DT binding to json-schema (Herve Codina)
- Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver
(Herve Codina)
Samsung Exynos PCIe controller driver:
- Fix phy-exynos-pcie driver so it follows the 'phy_init() before
phy_power_on()' PHY programming model (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Simplify and clean up the DWC core extensively (Serge Semin)
- Fix an issue with programming the ATU for regions that cross a 4GB
boundary (Serge Semin)
- Enable the CDM check if 'snps,enable-cdm-check' exists; previously
we skipped it if 'num-lanes' was absent (Serge Semin)
- Allocate a 32-bit DMA-able page to be MSI target instead of using a
driver data structure that may not be addressable with 32-bit
address (Will McVicker)
- Add DWC core support for more than 32 MSI interrupts (Dmitry
Baryshkov)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port
(Bharat Kumar Gogada)"
* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits)
PCI: imx6: Support more than Gen2 speed link mode
PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
PCI: imx6: Reformat suspend callback to keep symmetric with resume
PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
PCI: imx6: Disable clocks in reverse order of enable
PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
PCI: imx6: Reduce resume time by only starting link if it was up before suspend
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Call host init function directly in resume
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
...
|
|
Add a "flags" field to the "struct dw_edma_chip" so that the controller
drivers can pass flags that are relevant to the platform.
DW_EDMA_CHIP_LOCAL - Used by the controller drivers accessing eDMA
locally. Local eDMA access doesn't require generating MSIs to the remote.
Link: https://lore.kernel.org/r/20220524152159.2370739-8-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
|
|
In accordance with [1, 2] the DW eDMA controller has been created to be
part of the DW PCIe Root Port and DW PCIe End-point controllers and to
offload the transferring of large blocks of data between application and
remote PCIe domains leaving the system CPU free for other tasks. In the
first case (eDMA being part of DW PCIe Root Port) the eDMA controller is
always accessible via the CPU DBI interface and never over the PCIe wire.
The latter case is more complex. Depending on the DW PCIe End-Point IP-core
synthesize parameters it's possible to have the eDMA registers accessible
not only from the application CPU side, but also via mapping the eDMA CSRs
over a dedicated endpoint BAR. So based on the specifics denoted above the
eDMA driver is supposed to support two types of the DMA controller setups:
1) eDMA embedded into the DW PCIe Root Port/End-point and accessible over
the local CPU from the application side.
2) eDMA embedded into the DW PCIe End-point and accessible via the PCIe
wire with MWr/MRd TLPs generated by the CPU PCIe host controller.
Since the CPU memory resides different sides in these cases the semantics
of the MEM_TO_DEV and DEV_TO_MEM operations is flipped with respect to the
Tx and Rx DMA channels. So MEM_TO_DEV/DEV_TO_MEM corresponds to the Tx/Rx
channels in setup 1) and to the Rx/Tx channels in case of setup 2).
The DW eDMA driver has supported the case 2) since e63d79d1ffcd
("dmaengine: Add Synopsys eDMA IP core driver") in the framework of the
drivers/dma/dw-edma/dw-edma-pcie.c driver.
The case 1) support was added later by bd96f1b2f43a ("dmaengine: dw-edma:
support local dma device transfer semantics"). Afterwards the driver was
supposed to cover the both possible eDMA setups, but the latter commit
turned out to be not fully correct.
The problem was that the commit together with the new functionality support
also changed the channel direction semantics so the eDMA Read-channel
(corresponding to the DMA_DEV_TO_MEM direction for case 1) now uses the
sgl/cyclic base addresses as the Source addresses of the DMA transfers and
dma_slave_config.dst_addr as the Destination address of the DMA transfers.
Similarly the eDMA Write-channel (corresponding to the DMA_MEM_TO_DEV
direction for case 1) now uses dma_slave_config.src_addr as a source
address of the DMA transfers and sgl/cyclic base address as the Destination
address of the DMA transfers. This contradicts the logic of the
DMA-interface, which implies that DEV side is supposed to belong to the
PCIe device memory and MEM - to the CPU/Application memory. Indeed it seems
irrational to have the SG-list defined in the PCIe bus space, while
expecting a contiguous buffer allocated in the CPU memory. Moreover the
passed SG-list and cyclic DMA buffers are supposed to be mapped in a way so
to be seen by the DW eDMA Application (CPU) interface.
So in order to have the correct DW eDMA interface we need to invert the
eDMA Rd/Wr-channels and DMA-slave directions semantics by selecting the
src/dst addresses based on the DMA transfer direction instead of using the
channel direction capability.
[1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
v.5.40a, March 2019, p.1092
[2] DesignWare Cores PCI Express Controller Databook - DWC PCIe Endpoint,
v.5.40a, March 2019, p.1189
Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Fixes: bd96f1b2f43a ("dmaengine: dw-edma: support local dma device transfer semantics")
Link: https://lore.kernel.org/r/20220524152159.2370739-7-Frank.Li@nxp.com
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
|
|
The dma_slave_config.direction field usage in the DW eDMA driver was
introduced by bd96f1b2f43a ("dmaengine: dw-edma: support local dma device
transfer semantics"). Mainly the change introduced there was correct
(indeed DEV_TO_MEM means using RD-channel and MEM_TO_DEV - WR-channel for
the case of having eDMA accessed locally from CPU/Application side), but
providing an additional MEM_TO_MEM/DEV_TO_DEV-based semantics was quite
redundant if not to say potentially harmful (when it comes to removing the
denoted field). First of all since the dma_slave_config.direction field has
been marked as obsolete (see [1] and the struct dma_slave_config [2]) and
will be discarded in future, using it especially in a non-standard way is
discouraged. Secondly in accordance with the commit denoted above the
default dw_edma_device_transfer() semantics has been changed despite what
its message said. So claiming that the method was left backward compatible
was wrong.
Fix the problems denoted above and simplify the dw_edma_device_transfer()
method by dropping the parsing of the DMA-channel direction field. Instead
of having that implicit dma_slave_config.direction field semantic, use the
recently added DW_EDMA_CHIP_LOCAL flag to distinguish between the local and
remote DW eDMA setups thus preserving support for both cases. Add an ASCII
figure to clarify the situation.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/driver-api/dmaengine/provider.rst?id=v5.18#n478
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/dmaengine.h?id=v5.18#n389
[bhelgaas: convert references to specific URLs]
Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220524152159.2370739-6-Frank.Li@nxp.com
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
|
|
The struct dw_edma contains wr(rd)_ch_cnt fields. The EDMA driver gets
write(read) channel number from register, then saves these into dw_edma.
The wr(rd)_ch_cnt in dw_edma_chip actually means how many link list memory
are available in ll_region_wr(rd)[EDMA_MAX_WR_CH]. Rename it to
ll_wr(rd)_cnt to indicate actual usage.
Link: https://lore.kernel.org/r/20220524152159.2370739-5-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
|
|
struct dw_edma_region rg_region included virtual address, physical address
and size information. But only the virtual address is used by EDMA driver.
Change it to void __iomem *reg_base to clean up code.
Link: https://lore.kernel.org/r/20220524152159.2370739-4-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
|
|
"struct dw_edma_chip" contains an internal structure "struct dw_edma" that
is used by the eDMA core internally and should not be touched by the eDMA
controller drivers themselves. But currently, the eDMA controller drivers
like "dw-edma-pci" allocate and populate this internal structure before
passing it on to the eDMA core. The eDMA core further populates the
structure and uses it. This is wrong!
Hence, move all the "struct dw_edma" specifics from controller drivers to
the eDMA core.
Link: https://lore.kernel.org/r/20220524152159.2370739-3-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
|
|
The "irq" field of struct dw_edma_chip was never used. Remove it.
Link: https://lore.kernel.org/r/20220524152159.2370739-2-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
|
|
After adding commit 8fc5133d6d4d ("dmaengine: dw-edma: Fix unaligned
64bit access") two branches under macro conditional become identical,
thus the code can be simplified without any functional change.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20220610100700.2295522-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Eliminate the follow smatch warning:
drivers/dma/dw-edma/dw-edma-v0-core.c:419 dw_edma_v0_core_start() warn:
inconsistent indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220413023442.18856-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
On some arch (ie aarch64 iMX8MM) unaligned PCIe accesses are
not allowed and lead to a kernel Oops.
[ 1911.668835] Unable to handle kernel paging request at virtual address ffff80001bc00a8c
[ 1911.668841] Mem abort info:
[ 1911.668844] ESR = 0x96000061
[ 1911.668847] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1911.668850] SET = 0, FnV = 0
[ 1911.668852] EA = 0, S1PTW = 0
[ 1911.668853] Data abort info:
[ 1911.668855] ISV = 0, ISS = 0x00000061
[ 1911.668857] CM = 0, WnR = 1
[ 1911.668861] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000040ff4000
[ 1911.668864] [ffff80001bc00a8c] pgd=00000000bffff003, pud=00000000bfffe003, pmd=0068000018400705
[ 1911.668872] Internal error: Oops: 96000061 [#1] PREEMPT SMP
...
The llp register present in the channel group registers is not
aligned on 64bit.
Fix unaligned 64bit access using two 32bit accesses
Fixes: 04e0a39fc10f ("dmaengine: dw-edma: Add writeq() and readq() for 64 bits architectures")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20220225120252.309404-1-herve.codina@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The commit in the Fixes: tag has changed the logic of the code and now it
is likely that the probe will return an early success (0), even if not
completely executed.
This should lead to a crash or similar issue later on when the code
accesses to some never allocated resources.
Change the '!err' into a 'err' when checking if
'dma_set_mask_and_coherent()' has failed or not.
While at it, simplify the code and remove the "can't success code" related
to 32 DMA mask.
As stated in [1], 'dma_set_mask_and_coherent(DMA_BIT_MASK(64))' can't fail
if 'dev->dma_mask' is non-NULL. And if it is NULL, it would fail for the
same reason when tried with DMA_BIT_MASK(32).
[1]: https://lkml.org/lkml/2021/6/7/398
Fixes: ecb8c88bd31c ("dmaengine: dw-edma-pcie: switch from 'pci_' to 'dma_' API")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/935fbb40ae930c5fe87482a41dcb73abf2257973.1636492127.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The wrappers in include/linux/pci-dma-compat.h should go away.
pci_set_dma_mask()/pci_set_consistent_dma_mask() should be
replaced with dma_set_mask()/dma_set_coherent_mask(),
and use dma_set_mask_and_coherent() for both.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Link: https://lore.kernel.org/r/1633663733-47199-2-git-send-email-wangqing@vivo.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
'head' is unused, remove it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/46e071be21fbc5ac5c35d4796a7e4249e94c3a77.1633847306.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently, is missing a null check on a pcim_iomap_table() return value
and this can lead to a null pointer dereference if the desired BAR
wasn't mapped previously.
Fix this by adding a null check and returning -ENOMEM.
Addresses-Coverity: ("Dereference null return")
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/bc5e6b8632c84660bb6dae454980e9419992ed14.1613674948.git.gustavo.pimentel@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Reverting the applied patch because it caused a regression on
ARC700 platform (32 bits).
Fixes: 05655541c950 ("dmaengine: dw-edma: Fix scatter-gather address calculation")
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/1778422e389fe40032e216b59b1b992c61ec9887.1613674948.git.gustavo.pimentel@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
To keep code consistent, some comments with dma keyword written in lower
case are now in upper case.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/8c4b3db90767972a2b4cbb6fa818cf0e9c3d6fe3.1613674948.git.gustavo.pimentel@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When the driver is compiled as a module and loaded if we try to unload
it, the Kernel shows a crash log. This Kernel crash is due to the
dma_async_device_unregister() call done after deleting the channels,
this patch fixes this issue.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/4aa850c035cf7ee488f1d3fb6dee0e37be0dce0a.1613674948.git.gustavo.pimentel@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
