| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The spinlock is not being used in hard interrupt context. There is no need
to disable irq when acquiring the lock. The interrupt thread handler also
is not in bottom half context, therefore we can also remove disabling of
the bh. Convert all dev_lock acquisition to plain spin_lock() calls.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162984026772.1939166.11504067782824765879.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The device general capability has a bit that indicate whether 'block on
fault' is supported. Add check to wq sysfs knob to check if cap exists
before allowing user to toggle.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162802992615.3084999.12539468940404102898.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Enabling device and wq returns standard errno and that does not provide
enough details to indicate what exactly failed. The hardware command status
is only 8bits. Expand the command status to 32bits and use the upper 16
bits to define software errors to provide more details on the exact
failure. Bit 31 will be used to indicate the error is software set as the
driver is using some of the spec defined hardware error as well.
Cc: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162681373579.1968485.5891788397526827892.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Set GRPCFG traffic class to value of 1 for best performance on current
generation of accelerators. Also add override option to allow experimentation.
Sysfs knobs are disabled for DSA/IAX gen1 devices.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162681373005.1968485.3761065664382799202.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The original architecture of /sys/bus/dsa invented a scheme whereby
a single entry in the list of bus drivers, /sys/bus/drivers/dsa,
handled all device types and internally routed them to different
different drivers. Those internal drivers were invisible to
userspace.
With the idxd driver transitioned to a proper bus device-driver model,
the legacy behavior needs to be preserved due to it being exposed to
user space via sysfs. Create a compat driver to provide the legacy
behavior for /sys/bus/dsa/drivers/dsa. This should satisfy user
tool accel-config v3.2 or ealier where this behavior is expected.
If the distro has a newer accel-config then the legacy mode does
not need to be enabled.
When the compat driver binds the device (i.e. dsa0) to the dsa driver,
it will be bound to the new idxd_drv. The wq device (i.e. wq0.0) will
be bound to either the dmaengine_drv or the user_drv. The dsa_drv
becomes a routing mechansim for the new drivers. It will not support
additional external drivers that are implemented later.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637468705.744545.4399080971745974435.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In preparation for dsa_drv compat support to be built-in, move the bus
code to its own compilation unit. A follow-on patch adds the compat
implementation. Recall that the compat implementation allows for the
deprecated / omnibus dsa_drv binding scheme rather than the idiomatic
organization of a full fledged bus driver per driver type.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637468142.744545.2811632736881720857.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add an array of support device types to the idxd_device_driver
definition in order to enable simple matching of device type to a
given driver. The deprecated / omnibus dsa_drv driver specifies
IDXD_DEV_NONE as its only role is to service legacy userspace (old
accel-config) directed bind requests and route them to them the proper
driver. It need not attach to a device when the bus is autoprobed. The
accel-config tooling is being updated to drop its dependency on this
deprecated bind scheme.
Reviewed-by: Dan Willliams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637465882.744545.17456174666211577867.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Don't need a wrapper to register the driver. Just do it directly.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637465319.744545.16325178432532362906.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Move the code related to a ->remove() function for the idxd
'struct device' to device.c to prep for the idxd device
sub-driver in device.c.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637464768.744545.15797285510999151668.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Move the code related to a ->probe() function for the idxd
'struct device' to device.c to prep for the idxd device
sub-driver in device.c.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637464189.744545.17423830646786162194.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Current implementation have put all the code that should be in a driver
probe/remove in the bus probe/remove function. Add ->probe() and ->remove()
support for the dsa_drv and move all those code out of bus probe/remove.
The change does not split out the distinction between device sub-driver and
wq sub-driver. It only cleans up the bus calls. The split out will be
addressed in follow on patches.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637463586.744545.5806250155539938643.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Remove ->shutdown() function for the dsa bus as it does not do anything and
is not necessary.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637462319.744545.10383189484257042066.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Move the wq_disable() function to device.c in preparation of setting up the
idxd internal sub-driver framework. No logic changes.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637461775.744545.9644048686618957886.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Move the wq_enable() function to device.c in preparation of setting up the
idxd internal sub-driver framework. No logic changes.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637461176.744545.3806109011554118998.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The IDXD_DEV_CONF_READY state flag is no longer needed. The current
implementation uses this flag to stop the device from doing
configuration until the pci driver probe has completed. With the
driver architecture going towards multiple sub-driver attached to
the dsa_bus, this is no longer feasible. The sub-drivers will be
allowed to probe and return with failure when they are not ready
to complete the probe rather than using a state flag to gate the
probing.
There is no expectation that the devices auto-attach to a driver.
Userspace configuration is expected to setup the device before
enabling.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637460633.744545.8902095097471365420.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a 'struct idxd_dev' that wraps the 'struct device' for idxd conf_dev
that registers with the dsa bus. This is introduced in order to deal with
multiple different types of 'devices' that are registered on the dsa_bus
when the compat driver needs to route them to the correct driver to attach.
The bind() call now can determine the type of device and then do the
appropriate driver matching.
Reviewed-by Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637460065.744545.584492831446090984.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add name field in idxd_device_driver so we don't have to touch the
'struct device_driver' during declaration.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637459517.744545.7572915135318813722.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add helper functions for dsa-driver registration similar to other
bus-types. In particular, do not require dsa-drivers to open-code the
bus, owner, and mod_name fields. Let registration and unregistration
operate on the 'struct idxd_device_driver' instead of the raw /
embedded 'struct device_driver'.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637458949.744545.14996726325385482050.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
->shutdown() call should only be responsible for quiescing the device.
Currently it is doing PCI device tear down. This causes issue when things
like MMIO mapping is removed while idxd_unregister_devices() will trigger
removal of idxd device sub-driver and still initiates MMIO writes to the
device. Another issue is with the unregistering of idxd 'struct device',
the memory context gets freed. So the teardown calls are accessing freed
memory and can cause kernel oops. Move all the teardown bits that doesn't
belong in shutdown to ->remove() call. Move unregistering of the idxd
conf_dev 'struct device' to after doing all the teardown to free all
the memory that's no longer needed.
Fixes: 47c16ac27d4c ("dmaengine: idxd: fix idxd conf_dev 'struct device' lifetime")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162629983901.395844.17964803190905549615.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add occupancy information to wq sysfs attribute. Attribute will show
wq occupancy data if "WQ Occupancy Support" field in WQCAP is 1. It
displays the number of entries currently in this WQ. This is provided
as an estimate and should not be relied on to determine whether there
is space in the WQ. The data is to provide information to user apps
for flow control.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162275745546.1857062.8765615879420582018.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The previous state cleanup patch only performed wq state cleanups. This
does not go far enough as when device is disabled or reset, the state
for groups and engines must also be cleaned up. Add additional state
cleanup beyond wq cleanup. Tie those cleanups directly to device
disable and reset, and wq disable and reset.
Fixes: da32b28c95a7 ("dmaengine: idxd: cleanup workqueue config after disabling")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162285154108.2096632.5572805472362321307.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert sprintf() to sysfs_emit() in order to check buffer overrun on sysfs
outputs.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161894440044.3202472.13926639619695319753.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
DSA spec states that when Request Interrupt Handle and Release Interrupt
Handle command bits are set in the CMDCAP register, these device commands
must be supported by the driver.
The interrupt handle is programmed in a descriptor. When Request Interrupt
Handle is not supported, the interrupt handle is the index of the desired
entry in the MSI-X table. When the command is supported, driver must use
the command to obtain a handle to be programmed in the submitted
descriptor.
A requested handle may be revoked. After the handle is revoked, any use of
the handle will result in Invalid Interrupt Handle error.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161894439422.3202472.17579543737810265471.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The read-only configuration mode is defined by the DSA spec as a mode of
the device WQ configuration. When GENCAP register bit 31 is set to 0,
the device is in RO mode and group configuration and some fields of the
workqueue configuration registers are read-only and reflect the fixed
configuration of the device. Add support for RO mode. The driver will
load the values from the registers directly setup all the internally
cached data structures based on the device configuration.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161894438847.3202472.6317563824045432727.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Current submission path has no way to restrict the submitter from
stop submiting on shutdown path or wq disable path. This provides a way to
quiesce the submission path.
Modeling after 'struct reqeust_queue' usage of percpu_ref. One of the
abilities of per_cpu reference counting is the ability to stop new
references from being taken while awaiting outstanding references to be
dropped. On wq shutdown, we want to block any new submissions to the kernel
workqueue and quiesce before disabling. The percpu_ref allows us to block
any new submissions and wait for any current submission calls to finish
submitting to the workqueue.
A percpu_ref is embedded in each idxd_wq context to allow control for
individual wq. The wq->wq_active counter is elevated before calling
movdir64b() or enqcmds() to submit a descriptor to the wq and dropped once
the submission call completes. The function is gated by
percpu_ref_tryget_live(). On shutdown with percpu_ref_kill() called, any
new submission would be blocked from acquiring a ref and failed. Once all
references are dropped for the wq, shutdown can continue.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161894438293.3202472.14894701611500822232.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Move all static data type for per device type to an idxd_driver_data data
structure. The data can be attached to the pci_device_id and provided by
the pci probe function. This removes a lot of unnecessary type detection
and setup code.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161852988924.2203940.2787590808682466398.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There is no need to have an additional bus for the IAX device. The removal
of IAX will change user ABI as /sys/bus/iax will no longer exist.
The iax device will be moved to the dsa bus. The device id for dsa and
iax will now be combined rather than unique for each device type in order
to accommodate the iax devices. This is in preparation for fixing the
sub-driver code for idxd. There's no hardware deployment for Sapphire
Rapids platform yet, which means that users have no reason to have
developed scripts against this ABI. There is some exposure to
released versions of accel-config, but those are being fixed up and
an accel-config upgrade is reasonable to get IAX support. As far as
accel-config is concerned IAX support starts when these devices appear
under /sys/bus/dsa, and old accel-config just assumes that an empty /
missing /sys/bus/iax just means a lack of platform support.
Fixes: f25b463883a8 ("dmaengine: idxd: add IAX configuration support in the IDXD driver")
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161852988298.2203940.4529909758034944428.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The char device setup and cleanup has device lifetime issues regarding when
parts are initialized and cleaned up. The initialization of struct device is
done incorrectly. device_initialize() needs to be called on the 'struct
device' and then additional changes can be added. The ->release() function
needs to be setup via device_type before dev_set_name() to allow proper
cleanup. The change re-parents the cdev under the wq->conf_dev to get
natural reference inheritance. No known dependency on the old device path exists.
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes: 42d279f9137a ("dmaengine: idxd: add char driver to expose submission portal to userland")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/161852987721.2203940.1478218825576630810.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Remove devm_* allocation and fix group->conf_dev 'struct device'
lifetime. Address issues flagged by CONFIG_DEBUG_KOBJECT_RELEASE.
Add release functions in order to free the allocated memory at the
group->conf_dev destruction time.
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161852987144.2203940.8830315575880047.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Remove devm_* allocation and fix engine->conf_dev 'struct device'
lifetime. Address issues flagged by CONFIG_DEBUG_KOBJECT_RELEASE.
Add release functions in order to free the allocated memory at the
engine conf_dev destruction time.
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161852986460.2203940.16603218225412118431.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Remove devm_* allocation and fix wq->conf_dev 'struct device' lifetime.
Address issues flagged by CONFIG_DEBUG_KOBJECT_RELEASE. Add release
functions in order to free the allocated memory for the wq context at
device destruction time.
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161852985907.2203940.6840120734115043753.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The devm managed lifetime is incompatible with 'struct device' objects that
resides in idxd context. This is one of the series that clean up the idxd
driver 'struct device' lifetime. Fix idxd->conf_dev 'struct device'
lifetime. Address issues flagged by CONFIG_DEBUG_KOBJECT_RELEASE.
Add release functions in order to free the allocated memory at the
appropriate time.
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161852985319.2203940.4650791514462735368.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
A pre-release silicon erratum workaround where wq reset does not clear
WQCFG registers was leaked into upstream code. Use wq reset command
instead of blasting the MMIO region. This also address an issue where
we clobber registers in future devices.
Fixes: da32b28c95a7 ("dmaengine: idxd: cleanup workqueue config after disabling")
Reported-by: Shreenivaas Devarajan <shreenivaas.devarajan@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161824330020.881560.16375921906426627033.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
WQ size can only be changed when the device is disabled. Current code
allows change when device is enabled but wq is disabled. Change the check
to detect device state.
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161782558755.107710.18138252584838406025.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The operation capability register is 256bits. The current output only
prints out the first 64bits. Fix to output the entire 256bits. The current
code omits operation caps from IAX devices.
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Reported-by: Lucas Van <lucas.van@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161645624963.2003736.829798666998490151.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The clean up is off by one so this will start at "i" and it should start
with "i - 1" and then it doesn't unregister the zeroeth elements in the
array.
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/X9nFeojulsNqUSnG@mwanda
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support to allow configuration of Intel Analytics Accelerator (IAX) in
addition to the Intel Data Streaming Accelerator (DSA). The IAX hardware
has the same configuration interface as DSA. The main difference
is the type of operations it performs. We can support the DSA and
IAX devices on the same driver with some tweaks.
IAX has a 64B completion record that needs to be 64B aligned, as opposed to
a 32B completion record that is 32B aligned for DSA. IAX also does not
support token management.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/160564555488.1834439.4261958859935360473.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
With the DSA spec 1.1 update, a knob to disable ATS for individually is
introduced. Add enabling code to allow a system admin to make the
configuration through sysfs.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/160530810593.1288392.2561048329116529566.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add shared workqueue support that includes the support of Shared Virtual
memory (SVM) or in similar terms On Demand Paging (ODP). The shared
workqueue uses the enqcmds command in kernel and will respond with retry if
the workqueue is full. Shared workqueue only works when there is PASID
support from the IOMMU.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/160382007499.3911367.26043087963708134.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Export admin command status to sysfs attribute in order to allow user to
retrieve configuration error. Allows user tooling to retrieve the command
error and provide more user friendly error messages.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159865278770.29455.8026892329182750127.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add sysfs attribute max_batch_size to wq in order to allow the max batch
size configured on a per wq basis. Add support code to configure
the valid user input on wq enable. This is a performance tuning
parameter.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159865273617.29141.4383066301730821749.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add sysfs attribute max_xfer_size to wq in order to allow the max xfer
size configured on a per wq basis. Add support code to configure
the valid user input on wq enable. This is a performance tuning
parameter.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159865265404.29141.3049399618578194052.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Conflicts:
drivers/dma/idxd/sysfs.c
|
|
Add wq drain support. When a wq is being released, it needs to wait for
all in-flight operation to complete. A device control function
idxd_wq_drain() has been added to facilitate this. A wq drain call
is added to the char dev on release to make sure all user operations are
complete. A wq drain is also added before the wq is being disabled.
A drain command can take an unpredictable period of time. Interrupt support
for device commands is added to allow waiting on the command to
finish. If a previous command is in progress, the new submitter can block
until the current command is finished before proceeding. The interrupt
based submission will submit the command and then wait until a command
completion interrupt happens to complete. All commands are moved to the
interrupt based command submission except for the device reset during
probe, which will be polled.
Fixes: 42d279f9137a ("dmaengine: idxd: add char driver to expose submission portal to userland")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/159319502515.69593.13451647706946040301.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
After disabling a device, we should clean up the internal state for
the wqs and zero out the configuration registers. Without doing so can cause
issues when the user reprogram the wqs.
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Reported-by: Yixin Zhang <yixin.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Yixin Zhang <yixin.zhang@intel.com>
Link: https://lore.kernel.org/r/159311264246.1198.11955791213681679428.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Some user apps would like to know the hardware version in order to
determine the variation of the hardware. Export the hardware version number
to userspace via sysfs.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158696714008.39484.13401950732606906479.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Pull dmaengine updates from Vinod Koul:
"Core:
- Some code cleanup and optimization in core by Andy
- Debugfs support for displaying dmaengine channels by Peter
Drivers:
- New driver for uniphier-xdmac controller
- Updates to stm32 dma, mdma and dmamux drivers and PM support
- More updates to idxd drivers
- Bunch of changes in tegra-apb driver and cleaning up of pm
functions
- Bunch of spelling fixes and Replace zero-length array patches
- Shutdown hook for fsl-dpaa2-qdma driver
- Support for interleaved transfers for ti-edma and virtualization
support for k3-dma driver
- Support for reset and updates in xilinx_dma driver
- Improvements and locking updates in at_hdma driver"
* tag 'dmaengine-5.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits)
dt-bindings: dma: renesas,usb-dmac: add r8a77961 support
dmaengine: uniphier-xdmac: Remove redandant error log for platform_get_irq
dmaengine: tegra-apb: Improve DMA synchronization
dmaengine: tegra-apb: Don't save/restore IRQ flags in interrupt handler
dmaengine: tegra-apb: mark PM functions as __maybe_unused
dmaengine: fix spelling mistake "exceds" -> "exceeds"
dmaengine: sprd: Set request pending flag when DMA controller is active
dmaengine: ppc4xx: Use scnprintf() for avoiding potential buffer overflow
dmaengine: idxd: remove global token limit check
dmaengine: idxd: reflect shadow copy of traffic class programming
dmaengine: idxd: Merge definition of dsa_batch_desc into dsa_hw_desc
dmaengine: Create debug directories for DMA devices
dmaengine: ti: k3-udma: Implement custom dbg_summary_show for debugfs
dmaengine: Add basic debugfs support
dmaengine: fsl-dpaa2-qdma: remove set but not used variable 'dpaa2_qdma'
dmaengine: ti: edma: fix null dereference because of a typo in pointer name
dmaengine: fsl-dpaa2-qdma: Adding shutdown hook
dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver
dt-bindings: dmaengine: Add UniPhier external DMA controller bindings
dmaengine: ti: k3-udma: Implement support for atype (for virtualization)
...
|
|
The global token_limit is not tied to group tokens_reserved and
tokens_allowed parameters. Remove the check in order to allow independent
configuration.
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Reported-by: Yixin Zhang <yixin.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158386266911.11066.7545764533072221536.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There are some capabilities for the device that are interesting to user
apps that are interacting directly with the device. Expose gencap register
in sysfs to allow that information.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158256729399.55526.10842505054968710547.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The current size_store() function for idxd sysfs does not check the total
wq size. This allows configuration of all wqs with total wq size. Add check
to make sure the wq sysfs attribute rejects storing of size over the total
wq size.
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Reported-by: Jerry Chen <jerry.t.chen@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158213309629.2509.3583411832507185041.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
