summaryrefslogtreecommitdiff
path: root/drivers/dma/qcom
AgeCommit message (Collapse)AuthorFilesLines
2019-10-18dmaengine: qcom: bam_dma: Fix resource leakJeffrey Hugo1-0/+19
bam_dma_terminate_all() will leak resources if any of the transactions are committed to the hardware (present in the desc fifo), and not complete. Since bam_dma_terminate_all() does not cause the hardware to be updated, the hardware will still operate on any previously committed transactions. This can cause memory corruption if the memory for the transaction has been reassigned, and will cause a sync issue between the BAM and its client(s). Fix this by properly updating the hardware in bam_dma_terminate_all(). Fixes: e7c0fe2a5c84 ("dmaengine: add Qualcomm BAM dma driver") Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191017152606.34120-1-jeffrey.l.hugo@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-08dmaengine: qcom: hidma_mgmt: Add of_node_put() before gotoNishka Dasgupta1-2/+6
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put under the label that the gotos point to. In order to avoid decrementing an already-decremented refcount, copy the original contents of the label (including the return statement) to just above the label, so that the code under the label is executed only when a goto exit from the loop occurs. Additionally, remove an unnecessary get/put pair from the loop, as the loop itself already keeps track of refcount. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Acked-by: Sinan Kaya <okaya@kernel.org> Link: https://lore.kernel.org/r/20190724081609.9724-1-nishkadg.linux@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-08dmaengine: qcom_hidma: Remove call to memset after dmam_alloc_coherentFuqian Huang1-2/+0
In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Acked-by: Sinan Kaya <okaya@kernel.org> Link: https://lore.kernel.org/r/20190715031723.6375-1-huangfq.daxian@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-31dmaengine: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-1/+0
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: dmaengine@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-11-swboyd@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-17Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2-34/+8
Pull dmaengine updates from Vinod Koul: - Add support in dmaengine core to do device node checks for DT devices and update bunch of drivers to use that and remove open coding from drivers - New driver/driver support for new hardware, namely: - MediaTek UART APDMA - Freescale i.mx7ulp edma2 - Synopsys eDMA IP core version 0 - Allwinner H6 DMA - Updates to axi-dma and support for interleaved cyclic transfers - Greg's debugfs return value check removals on drivers - Updates to stm32-dma, hsu, dw, pl330, tegra drivers * tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support" dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback Documentation: dmaengine: clean up description of dmatest usage dmaengine: tegra210-adma: remove PM_CLK dependency dmaengine: fsl-edma: add i.mx7ulp edma2 version support dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma-common: version check for v2 instead dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver" dmaengine: rcar-dmac: Reject zero-length slave DMA requests dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw-edma: fix semicolon.cocci warnings dmaengine: sh: usb-dmac: Use [] to denote a flexible array member dmaengine: dmatest: timeout value of -1 should specify infinite wait dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit dmaengine: fsl-edma: support little endian for edma driver dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width" dmagengine: pl330: add code to get reset property dt-bindings: pl330: document the optional resets property ...
2019-07-05dmaengine: qcom: bam_dma: Fix completed descriptors countSricharan R1-0/+3
One space is left unused in circular FIFO to differentiate 'full' and 'empty' cases. So take that in to account while counting for the descriptors completed. Fixes the issue reported here, https://lkml.org/lkml/2019/6/18/669 Cc: stable@vger.kernel.org Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-14dmaengine: qcom: hidma: no need to check return value of debugfs_create ↵Greg Kroah-Hartman2-34/+8
functions When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Also, because there is no need to save the file dentry, remove the variables that were saving them as they were never even being used once set. Cc: Sinan Kaya <okaya@kernel.org> Cc: Andy Gross <agross@kernel.org> Cc: David Brown <david.brown@linaro.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: dmaengine@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner7-64/+7
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-20dmaengine: qcom_hidma: assign channel cookie correctlyShunyong Yang1-8/+9
When dma_cookie_complete() is called in hidma_process_completed(), dma_cookie_status() will return DMA_COMPLETE in hidma_tx_status(). Then, hidma_txn_is_success() will be called to use channel cookie mchan->last_success to do additional DMA status check. Current code assigns mchan->last_success after dma_cookie_complete(). This causes a race condition of dma_cookie_status() returns DMA_COMPLETE before mchan->last_success is assigned correctly. The race will cause hidma_tx_status() return DMA_ERROR but the transaction is actually a success. Moreover, in async_tx case, it will cause a timeout panic in async_tx_quiesce(). Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for transaction ... Call trace: [<ffff000008089994>] dump_backtrace+0x0/0x1f4 [<ffff000008089bac>] show_stack+0x24/0x2c [<ffff00000891e198>] dump_stack+0x84/0xa8 [<ffff0000080da544>] panic+0x12c/0x29c [<ffff0000045d0334>] async_tx_quiesce+0xa4/0xc8 [async_tx] [<ffff0000045d03c8>] async_trigger_callback+0x70/0x1c0 [async_tx] [<ffff0000048b7d74>] raid_run_ops+0x86c/0x1540 [raid456] [<ffff0000048bd084>] handle_stripe+0x5e8/0x1c7c [raid456] [<ffff0000048be9ec>] handle_active_stripes.isra.45+0x2d4/0x550 [raid456] [<ffff0000048beff4>] raid5d+0x38c/0x5d0 [raid456] [<ffff000008736538>] md_thread+0x108/0x168 [<ffff0000080fb1cc>] kthread+0x10c/0x138 [<ffff000008084d34>] ret_from_fork+0x10/0x18 Cc: Joey Zheng <yu.zheng@hxt-semitech.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-20dmaengine: qcom_hidma: initialize tx flags in hidma_prep_dma_*Shunyong Yang1-0/+2
In async_tx_test_ack(), it uses flags in struct dma_async_tx_descriptor to check the ACK status. As hidma reuses the descriptor in a free list when hidma_prep_dma_*(memcpy/memset) is called, the flag will keep ACKed if the descriptor has been used before. This will cause a BUG_ON in async_tx_quiesce(). kernel BUG at crypto/async_tx/async_tx.c:282! Internal error: Oops - BUG: 0 1 SMP ... task: ffff8017dd3ec000 task.stack: ffff8017dd3e8000 PC is at async_tx_quiesce+0x54/0x78 [async_tx] LR is at async_trigger_callback+0x98/0x110 [async_tx] This patch initializes flags in dma_async_tx_descriptor by the flags passed from the caller when hidma_prep_dma_*(memcpy/memset) is called. Cc: Joey Zheng <yu.zheng@hxt-semitech.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07dmaengine: qcom: bam_dma: use struct_size() in kzalloc()Gustavo A. R. Silva1-2/+2
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07dmaengine: qcom_hidma: Check for driver register failureAditya Pakki1-2/+1
While initializing the driver, the function platform_driver_register can fail and return an error. Consistent with other invocations, this patch returns the error upstream. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Acked-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-17dmaengine: qcom_hidma: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li1-27/+6
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-06-08Merge tag 'dmaengine-4.18-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds3-10/+9
Pull dmaengine updates from Vinod Koul: - updates to sprd, bam_dma, stm drivers - remove VLAs in dmatest - move TI drivers to their own subdir - switch to SPDX tags for ima/mxs dma drivers - simplify getting .drvdata on bunch of drivers by Wolfram Sang * tag 'dmaengine-4.18-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (32 commits) dmaengine: sprd: Add Spreadtrum DMA configuration dmaengine: sprd: Optimize the sprd_dma_prep_dma_memcpy() dmaengine: imx-dma: Switch to SPDX identifier dmaengine: mxs-dma: Switch to SPDX identifier dmaengine: imx-sdma: Switch to SPDX identifier dmaengine: usb-dmac: Document R8A7799{0,5} bindings dmaengine: qcom: bam_dma: fix some doc warnings. dmaengine: qcom: bam_dma: fix invalid assignment warning dmaengine: sprd: fix an NULL vs IS_ERR() bug dmaengine: sprd: Use devm_ioremap_resource() to map memory dmaengine: sprd: Fix potential NULL dereference in sprd_dma_probe() dmaengine: pl330: flush before wait, and add dev burst support. dmaengine: axi-dmac: Request IRQ with IRQF_SHARED dmaengine: stm32-mdma: fix spelling mistake: "avalaible" -> "available" dmaengine: rcar-dmac: Document R-Car D3 bindings dmaengine: sprd: Move DMA request mode and interrupt type into head file dmaengine: sprd: Define the DMA data width type dmaengine: sprd: Define the DMA transfer step type dmaengine: ti: New directory for Texas Instruments DMA drivers dmaengine: shdmac: Change platform check to CONFIG_ARCH_RENESAS ...
2018-06-04Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-1/+1
Pull dma-mapping updates from Christoph Hellwig: - replace the force_dma flag with a dma_configure bus method. (Nipun Gupta, although one patch is іncorrectly attributed to me due to a git rebase bug) - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai) - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the right thing for bounce buffering. - move dma-debug initialization to common code, and apply a few cleanups to the dma-debug code. - cleanup the Kconfig mess around swiotlb selection - swiotlb comment fixup (Yisheng Xie) - a trivial swiotlb fix. (Dan Carpenter) - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt) - add a new generic dma-noncoherent dma_map_ops implementation and use it for arc, c6x and nds32. - improve scatterlist validity checking in dma-debug. (Robin Murphy) - add a struct device quirk to limit the dma-mask to 32-bit due to bridge/system issues, and switch x86 to use it instead of a local hack for VIA bridges. - handle devices without a dma_mask more gracefully in the dma-direct code. * tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits) dma-direct: don't crash on device without dma_mask nds32: use generic dma_noncoherent_ops nds32: implement the unmap_sg DMA operation nds32: consolidate DMA cache maintainance routines x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag x86/pci-dma: remove the explicit nodac and allowdac option x86/pci-dma: remove the experimental forcesac boot option Documentation/x86: remove a stray reference to pci-nommu.c core, dma-direct: add a flag 32-bit dma limits dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs dma-debug: check scatterlist segments c6x: use generic dma_noncoherent_ops arc: use generic dma_noncoherent_ops arc: fix arc_dma_{map,unmap}_page arc: fix arc_dma_sync_sg_for_{cpu,device} arc: simplify arc_dma_sync_single_for_{cpu,device} dma-mapping: provide a generic dma-noncoherent implementation dma-mapping: simplify Kconfig dependencies riscv: add swiotlb support riscv: only enable ZONE_DMA32 for 64-bit ...
2018-06-04Merge branch 'topic/qcom' into for-linusVinod Koul2-6/+3
2018-05-17dmaengine: qcom: bam_dma: fix some doc warnings.Srinivas Kandagatla1-2/+3
Building kernel with W=1 throws up below warnings: bam_dma.c:459: warning: Function parameter or member 'dir' not described in 'bam_chan_init_hw' bam_dma.c:697: warning: Function parameter or member 'chan' not described in 'bam_dma_terminate_all' bam_dma.c:697: warning: Excess function parameter 'bchan' description in 'bam_dma_terminate_all' bam_dma.c:964: warning: Function parameter or member 'bchan' not described in 'bam_start_dma' Fix these!. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-17dmaengine: qcom: bam_dma: fix invalid assignment warningSrinivas Kandagatla1-2/+3
Building kernel with W=1 throws below invalid assignment warnings. bam_dma.c:676:44: warning: invalid assignment: += bam_dma.c:676:44: left side has type unsigned long bam_dma.c:676:44: right side has type restricted __le16 bam_dma.c:921:41: warning: invalid assignment: += bam_dma.c:921:41: left side has type unsigned long bam_dma.c:921:41: right side has type restricted __le16 Fix them!. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-17dmaengine: qcom: bam_dma: check if the runtime pm enabledSrinivas Kandagatla1-5/+13
Disabling pm runtime at probe is not sufficient to get BAM working on remotely controller instances. pm_runtime_get_sync() would return -EACCES in such cases. So check if runtime pm is enabled before returning error from bam functions. Fixes: 5b4a68952a89 ("dmaengine: qcom: bam_dma: disable runtime pm on remote controlled") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-03drivers: remove force dma flag from busesChristoph Hellwig1-1/+1
With each bus implementing its own DMA configuration callback, there is no need for bus to explicitly set the force_dma flag. Modify the of_dma_configure function to accept an input parameter which specifies if implicit DMA configuration is required when it is not described by the firmware. Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts Reviewed-by: Rob Herring <robh@kernel.org> [hch: tweaked the changelog a bit] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-22dmaengine: qcom: simplify getting .drvdataWolfram Sang2-6/+3
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-03-01dmaengine: qcom: bam_dma: disable runtime pm on remote controlledSrinivas Kandagatla1-2/+9
Remotely controlled BAM instance should not do any power management from CPU side, as cpu can not reliably say if the BAM is busy or not. Disable it for such instances. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-01dmaengine: qcom: bam_dma: do not write to global regs in remote modeSrinivas Kandagatla1-5/+8
BAM_DESC_CNT_TRSHLD register is global register, which can only be written when BAM is in master mode, So check the mode of operation before writing it. Without this check SOC's xPU would catch such access and crash the system. First noticed on DB820c while testing SLIMBus BAM. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-01dmaengine: qcom: bam_dma: get num-channels and num-ees from dtSrinivas Kandagatla1-5/+22
When Linux is master of BAM, it can directly read registers to know number of supported channels, however when its remotely controlled reading these registers would trigger a crash if the BAM is not yet initialized or powered up on the remote side. This patch allows driver to read num-channels and num-ees from Device Tree for remotely controlled BAM. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-01dmaengine: qcom: bam_dma: make bam clk optionalSrinivas Kandagatla1-2/+6
When BAM is remotely controlled it does not sound correct to control its clk on Linux side. Make it optional, so that its not mandatory for remote controlled BAM instances. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-31Merge branch 'topic/qcom_hidma' into for-linusVinod Koul1-46/+15
2018-01-08dmaengine: qcom_hidma: simplify DT resource parsingRob Herring1-46/+15
The hidma driver open codes populating address and IRQ resources from DT. We have standard functions of_address_to_resource and of_irq_to_resource for this, so use them instead. The DT binding states each child should have 2 addresses and 1 IRQ, so we can simplify the logic and do a fixed size resource allocation. Using the standard of_address_to_resource will also do any address translation which was missing. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-13dmaengine: qcom_hidma: Add identity register supportSinan Kaya1-3/+8
The location for destination event channel register has been relocated from offset 0x28 to 0x40. Update the code accordingly. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-13dmaengine: qcom_hidma: Add support for the new revisionSinan Kaya1-21/+13
Add support for probing the newer HW and also organize MSI capable hardware into an array for maintenance reasons. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-12dmaengine: qcom_hidma: check pending interruptsSinan Kaya1-3/+6
Driver is missing the interrupts if two requests are queued up at the same time as the interrupt handler is servicing a request that was just delivered. The ISR clears the interrupt at the end but it could be clearing the interrupt for an outstanding event. Therefore, second interrupt never arrives. Clear the interrupt first and then check for completions. Also, make sure that request start and interrupt clear do not overlap in time by using a spinlock. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-15Merge tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-60/+109
Pull dmaengine updates from Vinod Koul: "Updates for this cycle include: - new driver for Spreadtrum dma controller, ST MDMA and DMAMUX controllers - PM support for IMG MDC drivers - updates to bcm-sba-raid driver and improvements to sun6i driver - subsystem conversion for: - timers to use timer_setup() - remove usage of PCI pool API - usage of %p format specifier - minor updates to bunch of drivers" * tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (49 commits) dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type dmaengine: dmatest: warn user when dma test times out dmaengine: Revert "rcar-dmac: use TCRB instead of TCR for residue" dmaengine: stm32_mdma: activate pack/unpack feature dmaengine: at_hdmac: Remove unnecessary 0x prefixes before %pad dmaengine: coh901318: Remove unnecessary 0x prefixes before %pad MAINTAINERS: Step down from a co-maintaner of DW DMAC driver dmaengine: pch_dma: Replace PCI pool old API dmaengine: Convert timers to use timer_setup() dmaengine: sprd: Add Spreadtrum DMA driver dt-bindings: dmaengine: Add Spreadtrum SC9860 DMA controller dmaengine: sun6i: Retrieve channel count/max request from devicetree dmaengine: Build bcm-sba-raid driver as loadable module for iProc SoCs dmaengine: bcm-sba-raid: Use common GPL comment header dmaengine: bcm-sba-raid: Use only single mailbox channel dmaengine: bcm-sba-raid: serialize dma_cookie_complete() using reqs_lock dmaengine: pl330: fix descriptor allocation fail dmaengine: rcar-dmac: use TCRB instead of TCR for residue dmaengine: sun6i: Add support for Allwinner A64 and compatibles arm64: allwinner: a64: Add devicetree binding for DMA controller ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-25dmaengine: qcom-bam: Process multiple pending descriptorsSricharan R1-60/+109
The bam dmaengine has a circular FIFO to which we add hw descriptors that describes the transaction. The FIFO has space for about 4096 hw descriptors. Currently we add one descriptor and wait for it to complete with interrupt and then add the next pending descriptor. In this way, the FIFO is underutilized since only one descriptor is processed at a time, although there is space in FIFO for the BAM to process more. Instead keep adding descriptors to FIFO till its full, that allows BAM to continue to work on the next descriptor immediately after signalling completion interrupt for the previous descriptor. Also when the client has not set the DMA_PREP_INTERRUPT for a descriptor, then do not configure BAM to trigger a interrupt upon completion of that descriptor. This way we get a interrupt only for the descriptor for which DMA_PREP_INTERRUPT was requested and there signal completion of all the previous completed descriptors. So we still do callbacks for all requested descriptors, but just that the number of interrupts are reduced. CURRENT: ------ ------- --------------- |DES 0| |DESC 1| |DESC 2 + INT | ------ ------- --------------- | | | | | | INTERRUPT: (INT) (INT) (INT) CALLBACK: (CB) (CB) (CB) MTD_SPEEDTEST READ PAGE: 3560 KiB/s MTD_SPEEDTEST WRITE PAGE: 2664 KiB/s IOZONE READ: 2456 KB/s IOZONE WRITE: 1230 KB/s bam dma interrupts (after tests): 96508 CHANGE: ------ ------- ------------- |DES 0| |DESC 1 |DESC 2 + INT | ------ ------- -------------- | | (INT) (CB for 0, 1, 2) MTD_SPEEDTEST READ PAGE: 3860 KiB/s MTD_SPEEDTEST WRITE PAGE: 2837 KiB/s IOZONE READ: 2677 KB/s IOZONE WRITE: 1308 KB/s bam dma interrupts (after tests): 58806 Signed-off-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Tested-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-08-28dmaengine: qcom: bam_dma: add command descriptor flagAbhishek Sahu1-1/+5
If DMA_PREP_CMD flag is passed in prep_slave_sg then peripheral driver has passed the data is in BAM command descriptor format and BAM driver should set CMD bit for each of the HW descriptors. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-08-21dmaengine: qcom_hidma: avoid freeing an uninitialized pointerAnton Vasilyev1-1/+1
If device_node np doesn't contain child or first child doesn't have property "reg" then hidma_mgmt_of_populate_channels() perfoms deallocation on uninitialized local variable res. The patch adds res initialization by NULL. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Reviewed-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-07-19dmaengine: qcom_hidma: correct channel QOS register offsetSinan Kaya1-1/+1
A regression was found while testing QOS with different channels. The QOS register offset is 0x700 rather than 0x300. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-07-19dmaengine: qcom_hidma: correct overriding messageSinan Kaya1-4/+8
A false overriding information is being presented during boot under this scenario. 1. First object checks for kernel command line value against zero. 2. It doesn't find it, it sets the command line variable to the value coming from ACPI/DT. 3. Second object is being probed. 4. Second object sees that the value of kernel command line override is non-zero, it prints an overriding message even though value matches ACPI/DT value. hidma-mgmt QCOM8060:03: overriding max-write-burst-bytes: 1024 Add an additional check to verify that kernel command line value is different from the ACPI/DT value. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-07-19dmaengine: qcom_hidma: introduce memset supportSinan Kaya3-9/+46
HIDMA HW supports memset operation in addition to memcpy. Since the memset API is present on the kernel now, bring the memset feature into life. The descriptor format is the same for both memcpy and memset. Type of the descriptor is 4 when memset is requested. The lowest 8 bits of the source DMA argument is used as a fill pattern. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-07-03dmaengine: qcom_hidma: correct API violation for submitSinan Kaya2-3/+13
Current code is violating the DMA Engine API by putting the submitted requests directly into the HW queue. This causes queued transactions to be started by another thread as soon as the first one finishes. The DMA Engine document clearly states this. "dmaengine_submit() will not start the DMA operation". Move HW queuing of the requests into the issue_pending() routine to comply with API requirements also create a new queued state for temporarily holding the requests. A descriptor goes through these transitions now. free->prepared->queued->active->completed->free as opposed to free->prepared->active->completed->free Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-26dmaengine: qcom_hidma: allow ACPI/DT parameters to be overriddenSinan Kaya2-3/+51
Parameters like maximum read/write request size and the maximum number of active transactions are currently configured in DT/ACPI. This patch allows a user to override these to fine tune performance for their application. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-27dmaengine: qcom_hidma: pause the channel on shutdownSinan Kaya1-0/+15
We need to ensure that all DMAs and interrupts are cleared during shutdown operation in order for kexec to start the next kernel clearly. Otherwise, HW could be performing a DMA into random addresses in the middle of second kernel start. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-27dmaengine: qcom_hidma: disable/enable IRQs on pause/resumeSinan Kaya1-0/+6
Once the channels are stopped, disable interrupts to make sure no new HW interaction can happen. Similarly, re-enable the interrupts only if we know that channel is operational again. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-23dmaengine: qcom_hidma: autoload while probing ACPISinan Kaya2-0/+2
MODULE_DEVICE_TABLE is used by the kernel to determine which device driver should be loaded for which platform device. MODULE_DEVICE_TABLE has been only defined for the device-tree based platforms in the current code. Defining it also for ACPI based platforms. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-15dmaengine: qcom_hidma: cleanup sysfs entries during removeSinan Kaya2-6/+24
The 4.8-rc8 kernel is printing duplicate file entry warnings while removing the HIDMA object. This is caused by stale sysfs entries remaining from the previous execution. _sysfs_warn_dup+0x5c/0x78 sysfs_add_file_mode_ns+0x13c/0x1c0 sysfs_create_file_ns+0x2c/0x40 device_create_file+0x54/0xa0 hidma_probe+0x7c8/0x808 Create hidma_sysfs_init and hidma_sysfs_uninit functions and call them from the probe and remove path. To do proper clean up, adding the attrs object to the device data structure to keep it around until remove call is made. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-14dmaengine: qcom_hidma: hide MSI handler when unusedArnd Bergmann1-0/+2
The newly added MSI support causes a harmless warning when MSI is disabled: drivers/dma/qcom/hidma.c:558:20: error: 'hidma_chirq_handler_msi' defined but not used [-Werror=unused-function] This adds another #ifdef to match that around the users of the function. Fixes: 1c0e3e82a7fb ("dmaengine: qcom_hidma: add MSI support for interrupts") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-14dmaengine: qcom_hidma: remove unneeded of_node_put()Wei Yongjun1-1/+0
Device node iterators put the previous value of the index variable, so an explicit put causes a double put. Generated by: scripts/coccinelle/iterators/device_node_continue.cocci Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-03dmaengine: qcom_hidma: add MSI support for interruptsSinan Kaya3-6/+147
The interrupts can now be delivered as platform MSI interrupts on newer platforms. The code looks for a new OF and ACPI strings in order to enable the functionality. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-03dmaengine: qcom_hidma: protect common data structuresSinan Kaya1-33/+11
When MSI interrupts are supported, error and the transfer interrupt can come from multiple processor contexts. Each error interrupt is an MSI interrupt. If the channel is disabled by the first error interrupt, the remaining error interrupts will gracefully return in the interrupt handler. If an error is observed while servicing the completions in success case, the posting of the completions will be aborted as soon as channel disabled state is observed. The error interrupt handler will take it from there and finish the remaining completions. We don't want to create multiple success and error messages to be delivered to the client in mixed order. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-03dmaengine: qcom_hidma: bring out interrupt causeSinan Kaya1-29/+33
Bring out the interrupt cause to the top level so that MSI interrupts can be hooked at a later stage. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>