summaryrefslogtreecommitdiff
path: root/drivers/edac/i5100_edac.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-01EDAC/i5100: Fix error handling order in i5100_init_one()Dinghao Liu1-6/+5
When pci_get_device_func() fails, the driver doesn't need to execute pci_dev_put(). mci should still be freed, though, to prevent a memory leak. When pci_enable_device() fails, the error injection PCI device "einj" doesn't need to be disabled either. [ bp: Massage commit message, rename label to "bail_mc_free". ] Fixes: 52608ba205461 ("i5100_edac: probe for device 19 function 0") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200826121437.31606-1-dinghao.liu@zju.edu.cn
2019-12-17EDAC: remove set but not used variable 'ecc_loc'yu kuai1-7/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/edac/i5100_edac.c: In function ‘i5100_read_log’: drivers/edac/i5100_edac.c:489:11: warning: variable ‘ecc_loc’ set but not used [-Wunused-but-set-variable] It is never used, and so can be removed. Signed-off-by: yu kuai <yukuai3@huawei.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20191216110121.46698-1-yukuai3@huawei.com
2019-11-10EDAC: Introduce an mci_for_each_dimm() iteratorRobert Richter1-8/+5
Introduce an mci_for_each_dimm() iterator. It returns a pointer to a struct dimm_info. This makes the declaration and use of an index obsolete and avoids access to internal data of struct mci (direct array access etc). [ bp: push the struct dimm_info *dimm; declaration into the CONFIG_EDAC_DEBUG block. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-4-rrichter@marvell.com
2019-11-09EDAC: Replace EDAC_DIMM_PTR() macro with edac_get_dimm() functionRobert Richter1-2/+1
The EDAC_DIMM_PTR() macro takes 3 arguments from struct mem_ctl_info. Clean up this interface to only pass the mci struct and replace this macro with a new function edac_get_dimm(). Also introduce an edac_get_dimm_by_index() function for later use. This allows it to get a DIMM pointer only by a given index. This can be useful if the DIMM's position within the layers of the memory controller or the exact size of the layers are unknown. Small style changes made for some hunks after applying the semantic patch. Semantic patch used: @@ expression mci, a, b,c; @@ -EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, a, b, c) +edac_get_dimm(mci, a, b, c) [ bp: Touchups. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jason Baron <jbaron@akamai.com> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-2-rrichter@marvell.com
2019-09-30EDAC: i5100_edac: get rid of an unused varMauro Carvalho Chehab1-2/+0
As reported by GCC with W=1: drivers/edac/i5100_edac.c:714:16: warning: variable ‘et’ set but not used [-Wunused-but-set-variable] 714 | unsigned long et; | ^~ It sounds some left over from some code before the addition of an udelay(). Acked-by: Borislav Petkov <bp@alien8.de> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-09-03EDAC: Prefer 'unsigned int' to bare use of 'unsigned'Robert Richter1-7/+9
Use of 'unsigned int' instead of bare use of 'unsigned'. Fix this for edac_mc*, ghes and the i5100 driver as reported by checkpatch.pl. While at it, struct member dev_ch_attribute->channel is always used as unsigned int. Change type to unsigned int to avoid type casts. [ bp: Massage. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190902123216.9809-2-rrichter@marvell.com
2017-07-17EDAC: Get rid of mci->mod_verBorislav Petkov1-1/+0
It is a write-only variable so get rid of it. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Robert Richter <rric@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Jason Baron <jbaron@akamai.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Loc Ho <lho@apm.com> Cc: linux-edac@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org
2016-12-15edac: rename edac_core.h to edac_mc.hMauro Carvalho Chehab1-1/+0
Now, all left at edac_core.h are at drivers/edac/edac_mc.c, so rename it to edac_mc.h. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-01-01EDAC, i5100: Use to_delayed_work()Geliang Tang1-3/+1
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/58c0e319c7263a10b692100c657c06c42814aecf.1451659910.git.geliangtang@163.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-22EDAC, i5100: Convert to debugfs wrappersBorislav Petkov1-18/+19
This driver creates its debugfs hierarchy under the toplevel debugfs dir - see i5100_init() - so make it use edac_debugfs_create_dir_at( , NULL) because we're not breaking userspace. Oh well. Signed-off-by: Borislav Petkov <bp@suse.de>
2015-01-12edac: i5100_edac: Remove unused i5100_recmema_dm_buf_idRickard Strandqvist1-5/+0
Remove the function i5100_recmema_dm_buf_id() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Link: http://lkml.kernel.org/r/1420999030-21770-1-git-send-email-rickard_strandqvist@spectrumdigital.se Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-20i5100_edac: Remove an unneeded condition in i5100_init_csrows()Dan Carpenter1-10/+7
We checked that "npages" was not zero a couple lines earlier so we can remove this and pull the code in one indent level. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: http://lkml.kernel.org/r/20140213111738.GB15549@elgon.mountain Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-06EDAC: Remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han1-1/+1
Currently, there is no other bus that has something like this macro for their device ids. Thus, DEFINE_PCI_DEVICE_TABLE macro should be removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Link: http://lkml.kernel.org/r/001c01ceefb3$5724d860$056e8920$%han@samsung.com [ Boris: swap commit message with better one. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-07-24EDAC: Fix lockdep splatBorislav Petkov1-1/+1
Fix the following: BUG: key ffff88043bdd0330 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0() DEBUG_LOCKS_WARN_ON(1) Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1 Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958 ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000 ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc Call Trace: dump_stack warn_slowpath_common warn_slowpath_fmt lockdep_init_map ? trace_hardirqs_on_caller ? trace_hardirqs_on debug_mutex_init __mutex_init bus_register edac_create_sysfs_mci_device edac_mc_add_mc sbridge_probe pci_device_probe driver_probe_device __driver_attach ? driver_probe_device bus_for_each_dev driver_attach bus_add_driver driver_register __pci_register_driver ? 0xffffffffa0010fff sbridge_init ? 0xffffffffa0010fff do_one_initcall load_module ? unset_module_init_ro_nx SyS_init_module tracesys ---[ end trace d24a70b0d3ddf733 ]--- EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0 EDAC sbridge: Driver loaded. What happens is that bus_register needs a statically allocated lock_key because the last is handed in to lockdep. However, struct mem_ctl_info embeds struct bus_type (the whole struct, not a pointer to it) and the whole thing gets dynamically allocated. Fix this by using a statically allocated struct bus_type for the MC bus. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org # v3.10 Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-02-26i5100_edac: convert to use simple_open()Wei Yongjun1-7/+1
This removes an open coded simple_open() function and replaces file operations references to the function with simple_open() instead. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21i5100_edac: Remove two checkpatch warningsMauro Carvalho Chehab1-4/+2
The last changeset introduced a few checkpatch warnings: WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required 261: FILE: drivers/edac/i5100_edac.c:1207: + if (priv->debugfs) + debugfs_remove_recursive(priv->debugfs); WARNING: debugfs_remove(NULL) is safe this check is probably not required 290: FILE: drivers/edac/i5100_edac.c:1250: + if (i5100_debugfs) + debugfs_remove(i5100_debugfs); Get rid of them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21i5100_edac: connect fault injection to debugfs nodeNiklas Söderlund1-1/+70
Create a debugfs direcotry i5100_edac/mcX for each memory controller and add nodes to control how fault injection is preformed. After configuring an injection using inject_channel, inject_deviceptr1, inject_deviceptr2, inject_eccmask1, inject_eccmask2 and inject_hlinesel trigger the injection by writing anything to inject_enable. Example of a CE injection: echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_channel echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_hlinesel echo 61440 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask1 echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_enable Example of UE injection: echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_channel echo 2 > /sys/kernel/debug/i5100_edac/mc0/inject_hlinesel echo 65535 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask1 echo 65535 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask2 echo 17 > /sys/kernel/debug/i5100_edac/mc0/inject_deviceptr1 echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_deviceptr2 echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_enable Sometimes it is needed to enable the injection more then once (echo to the inject_enable node) for the injection to happen, I am not sure why. Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21i5100_edac: add fault injection codeNiklas Söderlund1-0/+87
Add fault injection based on information datasheet for i5100, see 1. In addition to the i5100 datasheet some missing information on injection functions where found through experimentation and the i7300 datasheet, see 2. [1] Intel 5100 Memory Controller Hub Chipset Doc.Nr: 318378 http://www.intel.com/content/dam/doc/datasheet/5100- memory-controller-hub-chipset-datasheet.pdf [2] Intel 7300 Chipset MemoryController Hub (MCH) Doc.Nr: 318082 http://www.intel.com/assets/pdf/datasheet/318082.pdf Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21i5100_edac: probe for device 19 function 0Niklas Söderlund1-1/+27
Probe and store the device handle for the device 19 function 0 during driver initialization. The device is used during fault injection. Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-04Drivers: edac: remove __dev* attributes.Greg Kroah-Hartman1-13/+11
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Olof Johansson <olof@lixom.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12edac: edac_mc_handle_error(): add an error_count parameterMauro Carvalho Chehab1-2/+2
In order to avoid loosing error events, it is desirable to group error events together and generate a single trace for several identical errors. The trace API already allows reporting multiple errors. Change the handle_error function to also allow that. The changes at the drivers were made by this small script: $file .=$_ while (<>); $file =~ s/(edac_mc_handle_error)\s*\(([^\,]+)\,([^\,]+)\,/$1($2,$3, 1,/g; print $file; Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: remove arch-specific parameter for the error handlerMauro Carvalho Chehab1-2/+2
Remove the arch-dependent parameter, as it were not used, as the MCE tracepoint weren't implemented. It probably doesn't make sense to have an MCE-specific tracepoint, as this will cost more bytes at the tracepoint, and tracepoint is not free. The changes at the EDAC drivers were done by this small perl script: $file .=$_ while (<>); $file =~ s/(edac_mc_handle_error)\s*\(([^\;]+)\,([^\,\)]+)\s*\)/$1($2)/g; print $file; Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Convert debugfX to edac_dbg(X,Joe Perches1-2/+2
Use a more common debugging style. Remove __FILE__ uses, add missing newlines, coalesce formats and align arguments. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Rename the parent dev to pdevMauro Carvalho Chehab1-1/+1
As EDAC doesn't use struct device itself, it created a parent dev pointer called as "pdev". Now that we'll be converting it to use struct device, instead of struct devsys, this needs to be fixed. No functional changes. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-29i5100_edac: Fix a warning when compiled with 32 bitsMauro Carvalho Chehab1-2/+2
drivers/edac/i5100_edac.c: In function ‘i5100_init_csrows’: drivers/edac/i5100_edac.c:862:3: warning: format ‘%zd’ expects argument of type ‘signed size_t’, but argument 5 has type ‘long unsigned int’ [-Wformat] Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-29edac: Remove the legacy EDAC ABIMauro Carvalho Chehab1-1/+1
Now that all drivers got converted to use the new ABI, we can drop the old one. Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-29i5100_edac: convert driver to use the new edac ABIMauro Carvalho Chehab1-50/+40
The legacy edac ABI is going to be removed. Port the driver to use and benefit from the new API functionality. Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-29edac: move nr_pages to dimm structMauro Carvalho Chehab1-9/+13
The number of pages is a dimm property. Move it to the dimm struct. After this change, it is possible to add sysfs nodes for the DIMM's that will properly represent the DIMM stick properties, including its size. A TODO fix here is to properly represent dual-rank/quad-rank DIMMs when the memory controller represents the memory via chip select rows. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-29edac: Don't initialize csrow's first_page & friends when not neededMauro Carvalho Chehab1-2/+0
Almost all edac drivers initialize csrow_info->first_page, csrow_info->last_page and csrow_info->page_mask. Those vars are used inside the EDAC core, in order to calculate the csrow affected by an error, by using the routine edac_mc_find_csrow_by_page(). However, very few drivers actually use it: e752x_edac.c e7xxx_edac.c i3000_edac.c i82443bxgx_edac.c i82860_edac.c i82875p_edac.c i82975x_edac.c r82600_edac.c There also a few other drivers that have their own calculus formula internally using those vars. All the others are just wasting time by initializing those data. While initializing data without using them won't cause any troubles, as those information is stored at the wrong place (at csrows structure), it is better to remove what is unused, in order to simplify the next patch. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-29edac: move dimm properties to struct dimm_infoMauro Carvalho Chehab1-17/+21
On systems based on chip select rows, all channels need to use memories with the same properties, otherwise the memories on channels A and B won't be recognized. However, such assumption is not true for all types of memory controllers. Controllers for FB-DIMM's don't have such requirements. Also, modern Intel controllers seem to be capable of handling such differences. So, we need to get rid of storing the DIMM information into a per-csrow data, storing it, instead at the right place. The first step is to move grain, mtype, dtype and edac_mode to the per-dimm struct. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: James Bottomley <James.Bottomley@parallels.com> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Mike Williams <mike@mikebwilliams.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-29edac: Create a dimm struct and move the labels into itMauro Carvalho Chehab1-4/+4
The way a DIMM is currently represented implies that they're linked into a per-csrow struct. However, some drivers don't see csrows, as they're ridden behind some chip like the AMB's on FBDIMM's, for example. This forced drivers to fake^Wvirtualize a csrow struct, and to create a mess under csrow/channel original's concept. Move the DIMM labels into a per-DIMM struct, and add there the real location of the socket, in terms of csrow/channel. Latter patches will modify the location to properly represent the memory architecture. All other drivers will use a per-csrow type of location. Some of those drivers will require a latter conversion, as they also fake the csrows internally. TODO: While this patch doesn't change the existing behavior, on csrows-based memory controllers, a csrow/channel pair points to a memory rank. There's a known bug at the EDAC core that allows having different labels for the same DIMM, if it has more than one rank. A latter patch is need to merge the several ranks for a DIMM into the same dimm_info struct, in order to avoid having different labels for the same DIMM. The edac_mc_alloc() will now contain a per-dimm initialization loop that will be changed by latter patches in order to match other types of memory architectures. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-29Merge branch 'linux_next' of ↵Linus Torvalds1-8/+5
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull EDAC fixes from Mauro Carvalho Chehab: "A series of EDAC driver fixes. It also has one core fix at the documentation, and a rename patch, fixing the name of the struct that contains the rank information." * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: edac: rename channel_info to rank_info i5400_edac: Avoid calling pci_put_device() twice edac: i5100 ack error detection register after each read edac: i5100 fix erroneous define for M1Err edac: sb_edac: Fix a wrong value setting for the previous value edac: sb_edac: Fix a INTERLEAVE_MODE() misuse edac: sb_edac: Let the driver depend on PCI_MMCONFIG edac: Improve the comments to better describe the memory concepts edac/ppc4xx_edac: Fix compilation Fix sb_edac compilation with 32 bits kernels
2012-03-21edac: i5100 ack error detection register after each readNiklas Söderlund1-7/+4
If I only ack the detection register after a error have been detected I'm unable to reliably detect errors. I have verified this behavior using both an error injection DIMM and software to inject errors. I can't find any documentation supporting this behavior in Intel 5100 Memory Controller Hub Chipset, see 1. So this is all based on experimentation. [1] Intel® 5100 Memory Controller Hub Chipset http://www.intel.com/content/dam/doc/datasheet/5100- memory-controller-hub-chipset-datasheet.pdf Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-21edac: i5100 fix erroneous define for M1ErrNiklas Söderlund1-1/+1
According to [1] the define for M1Err in the FERR_NF_MEM register is wrong. It should be at position 1 not 0. [1] Intel 5100 Memory Controller Hub Chipset Doc.Nr: 318378 http://www.intel.com/content/dam/doc/datasheet/5100- memory-controller-hub-chipset-datasheet.pdf Reported-by: Ba Thang Nguyen <thang.b.nguyen@dektech.com.au> Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19EDAC: Make pci_device_id tables __devinitconst.Lionel Debroux1-1/+1
These const tables are currently marked __devinitdata, but Documentation/PCI/pci.txt says: "o The ID table array should be marked __devinitconst; this is done automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE()." So use DEFINE_PCI_DEVICE_TABLE(x). Based on PaX and earlier work by Andi Kleen. Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-01-07EDAC: Fixup scrubrate manipulationBorislav Petkov1-6/+3
Make the ->{get|set}_sdram_scrub_rate return the actual scrub rate bandwidth it succeeded setting and remove superfluous arg pointer used for that. A negative value returned still means that an error occurred while setting the scrubrate. Document this for future reference. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-08-03edac, mc: Improve scrub rate handlingBorislav Petkov1-4/+3
Fortify the interface to not accept negative values, remove memctrl_int_store() as a result. Also, sanitize bandwidth setting by making the argument a simple u32 instead of strange u32 pointer being passed around for no obvious reason. Then, fix error handling and teach it to return proper error values. Finally, make code more readable, simplify debug messages. Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Arthur Jones <ajones@riverbed.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Doug Thompson <dougthompson@xmission.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-1/+0
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-12-16edac: i5100 add 6 ranks per channelNils Carlson1-16/+20
Add support for 6 ranks per channel to the i5100 chipset. I have tested the patch as far as possible with correctible errors and things appear good. The DIMM mapping is correct for our board, but boards may differ. Signed-off-by: Nils Carlson <nils.carlson@ludd.ltu.se> Acked-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16edac: i5100 add scrubbingNils Carlson1-2/+110
Addscrubbing to the i5100 chipset. The i5100 chipset only supports one scrubbing rate, which is not constant but dependent on memory load. The rate returned by this driver is an estimate based on some experimentation, but is substantially closer to the truth than the speed supplied in the documentation. Also, scrubbing is done once, and then a done-bit is set. This means that to accomplish continuous scrubbing a re-enabling mechanism must be used. I have created the simplest possible such mechanism in the form of a work-queue which will check every five minutes. This interval is quite arbitrary but should be sufficient for all sizes of system memory. Signed-off-by: Nils Carlson <nils.carlson@ludd.ltu.se> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16edac: i5100 clean controller to channel termsNils Carlson1-55/+55
The i5100 driver uses the word controller instead of channel in a lot of places, this is simply a cleanup of the patch. Signed-off-by: Nils Carlson <nils.carlson@ludd.ltu.se> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: i5100: cleanupArthur Jones1-135/+261
Some code cleanliness issues found by Andrew Morton (thanks!) which should not affect functionality, but which should help make the code more maintainable. In particular, we now: * convert all #define's w/ a parameter to static inlines * use 1UL rather than 1ULL when calculating an unsigned long * use pci_disable_device The resulting code is tested and seems to work fine... Signed-off-by: Arthur Jones <ajones@riverbed.com> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: i5100 fix unmask ecc bitsArthur Jones1-0/+6
Explicitly unmask ECC errors we are interested in reporting. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: i5100 fix enable ecc hardwareArthur Jones1-0/+10
It is possible that the BIOS did not enable ECC at boot time. We check for that case and fail to load if it is true. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: i5100 fix missing bitsArthur Jones1-3/+15
The error mask we use to trigger ECC notifications is missing many bits of interest. We add these bits here so that all possible ECC errors can be reported. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: i5100 new intel chipset driverArthur Jones1-0/+827
Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>