summaryrefslogtreecommitdiff
path: root/drivers/extcon/extcon-sm5502.h
AgeCommit message (Collapse)AuthorFilesLines
2021-06-21extcon: sm5502: Add support for SM5504Stephan Gerhold1-0/+78
SM5504 is another MUIC from Silicon Mitus that is fairly similar to SM5502. They seem to use the same register set, but: - SM5504 has some additional bits in SM5502_REG_CONTROL - SM5504 has a quite different set of interrupts - SM5504 reports USB OTG as dev_type1 = BIT(0) instead of BIT(7) Overall it's minor and we can support this by defining a separate struct sm5502_type for SM5504. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-21extcon: sm5502: Refactor driver to use chip-specific structStephan Gerhold1-4/+0
Prepare for supporting SM5504 in the extcon-sm5502 driver by replacing enum sm5504_types with a struct sm5504_type that stores the chip-specific definitions. This struct can then be defined separately for SM5504 without having to add if (type == TYPE_SM5504) everywhere in the code. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-10-11extcon: sm5502: Reset registers during initializationStephan Gerhold1-0/+2
On some devices (e.g. Samsung Galaxy A5 (2015)), the bootloader seems to keep interrupts enabled for SM5502 when booting Linux. Changing the cable state (i.e. plugging in a cable) - until the driver is loaded - will therefore produce an interrupt that is never read. In this situation, the cable state will be stuck forever on the initial state because SM5502 stops sending interrupts. This can be avoided by clearing those pending interrupts after the driver has been loaded. One way to do this is to reset all registers to default state by writing to SM5502_REG_RESET. This ensures that we start from a clean state, with all interrupts disabled. Suggested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-22extcon: sm5502: Move sm5502.h header file to extcon directoryChanwoo Choi1-0/+282
This patch move sm5502.h header file from 'include/linux/extcon' to 'driver/extcon' because sm5502.h is used for driver/extcon/extcon-sm5502.c. and remove duplicate license description. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>